configs/at91sam9m10g45ek_mmc_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_SKIP_LOWLEVEL_INIT=y
   3 CONFIG_ARCH_AT91=y
   4 CONFIG_TEXT_BASE=0x73f00000
   5 CONFIG_SYS_MALLOC_LEN=0x2c000
   6 CONFIG_TARGET_AT91SAM9M10G45EK=y
   7 CONFIG_ATMEL_LEGACY=y
   8 CONFIG_NR_DRAM_BANKS=1
   9 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
  10 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x70003f00
  11 CONFIG_ENV_SIZE=0x4000
  12 CONFIG_DM_GPIO=y
  13 CONFIG_DEFAULT_DEVICE_TREE="at91sam9m10g45ek"
  14 CONFIG_SYS_MONITOR_LEN=524288
  15 CONFIG_DEBUG_UART_BASE=0xffffee00
  16 CONFIG_DEBUG_UART_CLOCK=132000000
  17 CONFIG_DEBUG_UART_BOARD_INIT=y
  18 CONFIG_SYS_LOAD_ADDR=0x22000000
  19 CONFIG_DEBUG_UART=y
  20 CONFIG_SD_BOOT=y
  21 CONFIG_BOOTDELAY=3
  22 CONFIG_USE_BOOTARGS=y
  23 CONFIG_BOOTARGS="console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mmcblk0p2 rw rootwait"
  24 CONFIG_USE_BOOTCOMMAND=y
  25 CONFIG_BOOTCOMMAND="fatload mmc 0:1 0x71000000 dtb; fatload mmc 0:1 0x72000000 zImage; bootz 0x72000000 - 0x71000000"
  26 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
  27 # CONFIG_DISPLAY_BOARDINFO is not set
  28 CONFIG_RESET_PHY_R=y
  29 CONFIG_HUSH_PARSER=y
  30 CONFIG_SYS_PROMPT="U-Boot> "
  31 CONFIG_SYS_CBSIZE=256
  32 CONFIG_SYS_PBSIZE=281
  33 # CONFIG_CMD_BDI is not set
  34 CONFIG_CMD_BOOTZ=y
  35 # CONFIG_CMD_IMI is not set
  36 # CONFIG_CMD_FLASH is not set
  37 # CONFIG_CMD_LOADS is not set
  38 CONFIG_CMD_MMC=y
  39 CONFIG_CMD_NAND=y
  40 CONFIG_CMD_USB=y
  41 # CONFIG_CMD_SETEXPR is not set
  42 CONFIG_CMD_DHCP=y
  43 CONFIG_BOOTP_BOOTFILESIZE=y
  44 CONFIG_CMD_PING=y
  45 CONFIG_CMD_FAT=y
  46 CONFIG_OF_CONTROL=y
  47 CONFIG_ENV_IS_IN_FAT=y
  48 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  49 CONFIG_CLK=y
  50 CONFIG_CLK_AT91=y
  51 CONFIG_AT91_GPIO=y
  52 CONFIG_GENERIC_ATMEL_MCI=y
  53 CONFIG_MTD=y
  54 CONFIG_MTD_RAW_NAND=y
  55 CONFIG_NAND_ATMEL=y
  56 CONFIG_MACB=y
  57 CONFIG_PINCTRL=y
  58 CONFIG_PINCTRL_AT91=y
  59 CONFIG_DM_SERIAL=y
  60 CONFIG_DEBUG_UART_ANNOUNCE=y
  61 CONFIG_ATMEL_USART=y
  62 CONFIG_TIMER=y
  63 CONFIG_ATMEL_PIT_TIMER=y
  64 CONFIG_USB=y
  65 CONFIG_USB_EHCI_HCD=y
  66 CONFIG_USB_STORAGE=y