configs/at91sam9g10ek_dataflash_cs0_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_SKIP_LOWLEVEL_INIT=y
   3 CONFIG_ARCH_AT91=y
   4 CONFIG_SYS_TEXT_BASE=0x21f00000
   5 CONFIG_SYS_MALLOC_LEN=0x2d000
   6 CONFIG_SYS_MALLOC_F_LEN=0x2000
   7 CONFIG_TARGET_AT91SAM9261EK=y
   8 CONFIG_NR_DRAM_BANKS=1
   9 CONFIG_ENV_SIZE=0x4200
  10 CONFIG_ENV_OFFSET=0x4200
  11 CONFIG_ENV_SECT_SIZE=0x210
  12 CONFIG_DM_GPIO=y
  13 CONFIG_DEFAULT_DEVICE_TREE="at91sam9261ek"
  14 CONFIG_DEBUG_UART_BOARD_INIT=y
  15 CONFIG_DEBUG_UART_BASE=0xfffff200
  16 CONFIG_DEBUG_UART_CLOCK=100000000
  17 CONFIG_DEBUG_UART=y
  18 CONFIG_SYS_LOAD_ADDR=0x22000000
  19 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G10,SYS_USE_DATAFLASH_CS0"
  20 CONFIG_BOOTDELAY=3
  21 CONFIG_USE_BOOTARGS=y
  22 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2"
  23 CONFIG_USE_BOOTCOMMAND=y
  24 CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000"
  25 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
  26 # CONFIG_DISPLAY_BOARDINFO is not set
  27 CONFIG_SYS_PROMPT="U-Boot> "
  28 # CONFIG_CMD_BDI is not set
  29 # CONFIG_CMD_IMI is not set
  30 # CONFIG_CMD_LOADS is not set
  31 CONFIG_CMD_NAND=y
  32 # CONFIG_CMD_SOURCE is not set
  33 # CONFIG_CMD_SETEXPR is not set
  34 CONFIG_CMD_DHCP=y
  35 CONFIG_CMD_PING=y
  36 CONFIG_CMD_FAT=y
  37 CONFIG_OF_CONTROL=y
  38 CONFIG_ENV_IS_IN_SPI_FLASH=y
  39 CONFIG_ENV_SPI_MAX_HZ=15000000
  40 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  41 CONFIG_DM=y
  42 CONFIG_CLK=y
  43 CONFIG_CLK_AT91=y
  44 CONFIG_AT91_GPIO=y
  45 # CONFIG_MMC is not set
  46 CONFIG_MTD=y
  47 CONFIG_MTD_RAW_NAND=y
  48 CONFIG_NAND_ATMEL=y
  49 CONFIG_DM_SPI_FLASH=y
  50 CONFIG_SPI_FLASH_ATMEL=y
  51 CONFIG_SPI_FLASH_DATAFLASH=y
  52 CONFIG_PINCTRL=y
  53 CONFIG_PINCTRL_AT91=y
  54 CONFIG_DM_SERIAL=y
  55 CONFIG_DEBUG_UART_ANNOUNCE=y
  56 CONFIG_ATMEL_USART=y
  57 CONFIG_SPI=y
  58 CONFIG_DM_SPI=y
  59 CONFIG_USB=y