configs/P1020RDB-PC_36BIT_SDCARD_defconfig

   1 CONFIG_PPC=y
   2 CONFIG_SYS_TEXT_BASE=0x11000000
   3 CONFIG_SYS_MALLOC_LEN=0x100000
   4 CONFIG_SPL_LIBCOMMON_SUPPORT=y
   5 CONFIG_SPL_LIBGENERIC_SUPPORT=y
   6 CONFIG_ENV_SIZE=0x2000
   7 CONFIG_ENV_OFFSET=0x0
   8 CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pc_36b"
   9 CONFIG_SPL_TEXT_BASE=0xf8f80000
  10 CONFIG_SPL_MMC=y
  11 CONFIG_SPL_SERIAL=y
  12 CONFIG_SPL=y
  13 CONFIG_MPC85xx=y
  14 # CONFIG_CMD_ERRATA is not set
  15 CONFIG_TARGET_P1020RDB_PC=y
  16 CONFIG_ENABLE_36BIT_PHYS=y
  17 CONFIG_SYS_MPC85XX_NO_RESETVEC=y
  18 CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y
  19 CONFIG_PCIE1=y
  20 CONFIG_PCIE2=y
  21 CONFIG_PHYS_64BIT=y
  22 CONFIG_MP=y
  23 CONFIG_FIT=y
  24 CONFIG_FIT_VERBOSE=y
  25 CONFIG_OF_BOARD_SETUP=y
  26 CONFIG_OF_STDOUT_VIA_ALIAS=y
  27 CONFIG_SPL_SYS_MONITOR_BASE=0xF8F80000
  28 CONFIG_FSL_FIXED_MMC_LOCATION=y
  29 CONFIG_BOOTDELAY=10
  30 CONFIG_USE_BOOTCOMMAND=y
  31 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"
  32 CONFIG_BOARD_EARLY_INIT_F=y
  33 CONFIG_BOARD_EARLY_INIT_R=y
  34 # CONFIG_MISC_INIT_R is not set
  35 # CONFIG_SPL_FRAMEWORK is not set
  36 CONFIG_SPL_MAX_SIZE=0x20000
  37 CONFIG_SPL_MMC_BOOT=y
  38 CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
  39 CONFIG_SPL_FLUSH_IMAGE=y
  40 CONFIG_SPL_GD_ADDR=0xf8f9c000
  41 CONFIG_SPL_RELOC_STACK=0xf8f9d000
  42 CONFIG_SPL_RELOC_MALLOC=y
  43 CONFIG_SPL_RELOC_MALLOC_ADDR=0xf8fa5000
  44 CONFIG_SPL_RELOC_MALLOC_SIZE=0x1b000
  45 CONFIG_SPL_ENV_SUPPORT=y
  46 CONFIG_SPL_I2C=y
  47 CONFIG_SPL_MPC8XXX_INIT_DDR=y
  48 CONFIG_SPL_TARGET="u-boot-with-spl.bin"
  49 CONFIG_HUSH_PARSER=y
  50 # CONFIG_AUTO_COMPLETE is not set
  51 CONFIG_SYS_PBSIZE=276
  52 CONFIG_CMD_IMLS=y
  53 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
  54 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
  55 CONFIG_CMD_I2C=y
  56 CONFIG_CMD_MMC=y
  57 CONFIG_CMD_USB=y
  58 CONFIG_CMD_MII=y
  59 CONFIG_CMD_PING=y
  60 # CONFIG_CMD_HASH is not set
  61 CONFIG_CMD_EXT2=y
  62 CONFIG_CMD_FAT=y
  63 CONFIG_OF_CONTROL=y
  64 CONFIG_ENV_OVERWRITE=y
  65 CONFIG_ENV_IS_IN_MMC=y
  66 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  67 CONFIG_USE_BOOTFILE=y
  68 CONFIG_BOOTFILE="uImage"
  69 CONFIG_USE_ETHPRIME=y
  70 CONFIG_ETHPRIME="eTSEC1"
  71 CONFIG_DM=y
  72 CONFIG_LBA48=y
  73 CONFIG_DDR_CLK_FREQ=66666666
  74 CONFIG_SYS_SPD_BUS_NUM=1
  75 CONFIG_CHIP_SELECTS_PER_CTRL=1
  76 CONFIG_SYS_DDR_RAW_TIMING=y
  77 CONFIG_SYS_BR0_PRELIM_BOOL=y
  78 CONFIG_SYS_BR0_PRELIM=0xEF001001
  79 CONFIG_SYS_OR0_PRELIM=0xFC000FF7
  80 CONFIG_SYS_BR2_PRELIM_BOOL=y
  81 CONFIG_SYS_BR2_PRELIM=0xFFB00801
  82 CONFIG_SYS_OR2_PRELIM=0xFFFE09FF
  83 CONFIG_SYS_BR3_PRELIM_BOOL=y
  84 CONFIG_SYS_BR3_PRELIM=0xFFA00801
  85 CONFIG_SYS_OR3_PRELIM=0xFFF009F7
  86 CONFIG_SPL_COMMON_INIT_DDR=y
  87 CONFIG_DM_I2C=y
  88 CONFIG_SPL_SYS_I2C_LEGACY=y
  89 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
  90 CONFIG_SYS_I2C_FSL=y
  91 CONFIG_SYS_FSL_I2C_OFFSET=0x3000
  92 CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
  93 CONFIG_SYS_FSL_I2C2_OFFSET=0x3100
  94 CONFIG_SYS_I2C_EEPROM_ADDR=0x52
  95 CONFIG_FSL_ESDHC=y
  96 CONFIG_MTD=y
  97 CONFIG_MTD_NOR_FLASH=y
  98 CONFIG_FLASH_CFI_DRIVER=y
  99 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 100 CONFIG_SYS_FLASH_EMPTY_INFO=y
 101 CONFIG_SYS_FLASH_CFI=y
 102 CONFIG_SYS_MAX_FLASH_SECT=128
 103 CONFIG_DM_SPI_FLASH=y
 104 CONFIG_SF_DEFAULT_SPEED=10000000
 105 CONFIG_SPI_FLASH_SPANSION=y
 106 CONFIG_PHY_ATHEROS=y
 107 CONFIG_PHY_BROADCOM=y
 108 CONFIG_PHY_DAVICOM=y
 109 CONFIG_PHY_LXT=y
 110 CONFIG_PHY_MARVELL=y
 111 CONFIG_PHY_NATSEMI=y
 112 CONFIG_PHY_REALTEK=y
 113 CONFIG_PHY_SMSC=y
 114 CONFIG_PHY_VITESSE=y
 115 CONFIG_PHY_FIXED=y
 116 CONFIG_DM_ETH=y
 117 CONFIG_DM_MDIO=y
 118 CONFIG_PHY_GIGE=y
 119 CONFIG_E1000=y
 120 CONFIG_MII=y
 121 CONFIG_TSEC_ENET=y
 122 CONFIG_PCIE_FSL=y
 123 CONFIG_DM_RTC=y
 124 CONFIG_SYS_NS16550=y
 125 CONFIG_SPI=y
 126 CONFIG_DM_SPI=y
 127 CONFIG_FSL_ESPI=y
 128 CONFIG_USB=y
 129 CONFIG_USB_EHCI_FSL=y
 130 CONFIG_USB_MAX_CONTROLLER_COUNT=2
 131 CONFIG_USB_STORAGE=y
 132 CONFIG_ADDR_MAP=y