1 menu "Command line interface"
4 bool "Support U-Boot commands"
7 Enable U-Boot's command-line functions. This provides a means
8 to enter commands into U-Boot for a wide variety of purposes. It
9 also allows scripts (containing commands) to be executed.
10 Various commands and command categorys can be indivdually enabled.
11 Depending on the number of commands enabled, this can add
12 substantially to the size of U-Boot.
18 This option enables the "hush" shell (from Busybox) as command line
19 interpreter, thus enabling powerful command line syntax like
20 if...then...else...fi conditionals or `&&' and '||'
21 constructs ("shell scripts").
23 If disabled, you get the old, much simpler behaviour with a somewhat
24 smaller memory footprint.
30 This string is displayed in the command line to the left of the
33 menu "Autoboot options"
39 This enables the autoboot. See doc/README.autoboot for detail.
42 bool "Stop autobooting via specific input key / string"
45 This option enables stopping (aborting) of the automatic
46 boot feature only by issuing a specific input key or
47 string. If not enabled, any input key will abort the
48 U-Boot automatic booting process and bring the device
49 to the U-Boot prompt for user input.
51 config AUTOBOOT_PROMPT
52 string "Autoboot stop prompt"
53 depends on AUTOBOOT_KEYED
54 default "Autoboot in %d seconds\\n"
56 This string is displayed before the boot delay selected by
57 CONFIG_BOOTDELAY starts. If it is not defined there is no
58 output indicating that autoboot is in progress.
60 Note that this define is used as the (only) argument to a
61 printf() call, so it may contain '%' format specifications,
62 provided that it also includes, sepearated by commas exactly
63 like in a printf statement, the required arguments. It is
64 the responsibility of the user to select only such arguments
65 that are valid in the given context.
67 config AUTOBOOT_ENCRYPTION
68 bool "Enable encryption in autoboot stopping"
69 depends on AUTOBOOT_KEYED
72 config AUTOBOOT_DELAY_STR
73 string "Delay autobooting via specific input key / string"
74 depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
76 This option delays the automatic boot feature by issuing
77 a specific input key or string. If CONFIG_AUTOBOOT_DELAY_STR
78 or the environment variable "bootdelaykey" is specified
79 and this string is received from console input before
80 autoboot starts booting, U-Boot gives a command prompt. The
81 U-Boot prompt will time out if CONFIG_BOOT_RETRY_TIME is
82 used, otherwise it never times out.
84 config AUTOBOOT_STOP_STR
85 string "Stop autobooting via specific input key / string"
86 depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
88 This option enables stopping (aborting) of the automatic
89 boot feature only by issuing a specific input key or
90 string. If CONFIG_AUTOBOOT_STOP_STR or the environment
91 variable "bootstopkey" is specified and this string is
92 received from console input before autoboot starts booting,
93 U-Boot gives a command prompt. The U-Boot prompt never
94 times out, even if CONFIG_BOOT_RETRY_TIME is used.
96 config AUTOBOOT_KEYED_CTRLC
97 bool "Enable Ctrl-C autoboot interruption"
98 depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
101 This option allows for the boot sequence to be interrupted
102 by ctrl-c, in addition to the "bootdelaykey" and "bootstopkey".
103 Setting this variable provides an escape sequence from the
104 limited "password" strings.
106 config AUTOBOOT_STOP_STR_SHA256
107 string "Stop autobooting via SHA256 encrypted password"
108 depends on AUTOBOOT_KEYED && AUTOBOOT_ENCRYPTION
110 This option adds the feature to only stop the autobooting,
111 and therefore boot into the U-Boot prompt, when the input
112 string / password matches a values that is encypted via
113 a SHA256 hash and saved in the environment.
117 source "cmd/fastboot/Kconfig"
134 Print ".config" contents.
136 If this option is enabled, the ".config" file contents are embedded
137 in the U-Boot image and can be printed on the console by the "config"
138 command. This provides information of which options are enabled on
145 Print console devices and information.
150 Print information about available CPUs. This normally shows the
151 number of CPUs, type (e.g. manufacturer, architecture, product or
152 internal name) and clock frequency. Other information may be
153 available depending on the CPU driver.
159 Print GPL license text
169 Run the command stored in the environment "bootcmd", i.e.
170 "bootd" does the same thing as "run bootcmd".
176 Boot an application image from the memory.
181 Boot the Linux zImage
188 Boot an AArch64 Linux Kernel image from memory.
192 depends on EFI_LOADER
195 Boot an EFI image from memory.
197 config CMD_BOOTEFI_HELLO_COMPILE
198 bool "Compile a standard EFI hello world binary for testing"
199 depends on CMD_BOOTEFI && (ARM || X86)
202 This compiles a standard EFI hello world application with U-Boot so
203 that it can be used with the test/py testing framework. This is useful
204 for testing that EFI is working at a basic level, and for bringing
205 up EFI support on a new architecture.
207 No additional space will be required in the resulting U-Boot binary
208 when this option is enabled.
210 config CMD_BOOTEFI_HELLO
211 bool "Allow booting a standard EFI hello world for testing"
212 depends on CMD_BOOTEFI_HELLO_COMPILE
214 This adds a standard EFI hello world application to U-Boot so that
215 it can be used with the 'bootefi hello' command. This is useful
216 for testing that EFI is working at a basic level, and for bringing
217 up EFI support on a new architecture.
223 Add an ANSI terminal boot menu command.
226 bool "bootelf, bootvx"
229 Boot an ELF/vxWorks image from the memory.
232 bool "Flattened Device Tree utility commands"
236 Do FDT related setup before booting into the Operating System.
242 Start an application at a given address.
248 Run the command in the given environment variable.
254 Print header information for application image.
260 List all images found in flash
266 Extract a part of a multi-image.
273 menu "Environment commands"
276 bool "ask for env variable"
278 Ask for environment variable
296 Edit environment variable.
301 Allow for searching environment variables
307 Save all environment variables into the compiled-in persistent
310 config CMD_ENV_EXISTS
314 Check if a variable is defined in the environment for use in
319 menu "Memory commands"
322 bool "md, mm, nm, mw, cp, cmp, base, loop"
327 mm - memory modify (auto-incrementing address)
328 nm - memory modify (constant address)
329 mw - memory write (fill)
332 base - print or set address offset
333 loop - initialize loop on address range
346 Compute MD5 checksum.
351 depends on CMD_MD5SUM
353 Add -v option to verify data against an MD5 checksum.
358 Infinite write loop on address range
363 Simple RAM read/write test.
368 mdc - memory display cyclic
369 mwc - memory write cyclic
374 Display memory information.
379 Uncompress a zip-compressed memory region.
384 Compress a memory region with zlib deflate method.
388 menu "Device access commands"
391 bool "clk - Show clock frequencies"
394 Shows clock frequences by calling a sock_clk_dump() hook function.
395 This is depreated in favour of using the CLK uclass and accessing
396 clock values from associated drivers. However currently no command
400 bool "dm - Access to driver model information"
404 Provides access to driver model data structures and information,
405 such as a list of devices, list of uclasses and the state of each
406 device (e.g. activated). This is not required for operation, but
407 can be useful to see the state of driver model for debugging or
411 bool "demo - Demonstration commands for driver model"
414 Provides a 'demo' command which can be used to play around with
415 driver model. To use this properly you will need to enable one or
416 both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
417 Otherwise you will always get an empty list of devices. The demo
418 devices are defined in the sandbox device tree, so the easiest
419 option is to use sandbox and pass the -d point to sandbox's
426 Load a binary file over serial line.
432 Load an S-Record file over serial line
435 bool "flinfo, erase, protect"
439 flinfo - print FLASH memory information
441 protect - enable or disable FLASH write protection
444 bool "GPT (GUID Partition Table) command"
445 select PARTITION_UUIDS
448 Enable the 'gpt' command to ready and write GPT style partition
452 #depends on FLASH_CFI_DRIVER
455 ARM Ltd reference designs flash partition access
460 MMC memory mapped support.
464 default y if NAND_SUNXI
469 config CMD_NAND_TRIMFFS
470 bool "nand write.trimffs"
471 default y if ARCH_SUNXI
473 Allows one to skip empty pages when flashing something on a NAND.
475 config CMD_NAND_LOCK_UNLOCK
476 bool "nand lock/unlock"
478 NAND locking support.
480 config CMD_NAND_TORTURE
483 NAND torture support.
489 select PARTITION_UUIDS
491 Read and display information about the partition table on
516 select USB_FUNCTION_DFU
518 Enables the command "dfu" which is used to have U-Boot create a DFU
519 class device via USB.
521 config CMD_USB_MASS_STORAGE
522 bool "UMS usb mass storage"
524 USB mass storage support
532 config CMD_REMOTEPROC
534 depends on REMOTEPROC
536 Support for Remote Processor control
546 menu "Shell scripting commands"
558 Return true/false on integer compare.
564 Run script from memory
570 Evaluate boolean and math expressions and store the result in an env
572 Also supports loading the value at a memory location into a variable.
573 If CONFIG_REGEX is enabled, setexpr also supports a gsub function.
577 menu "Network commands"
580 bool "bootp, tftpboot"
585 bootp - boot image via network using BOOTP/TFTP protocol
586 tftpboot - boot image via network using TFTP protocol
591 TFTP put command, for uploading files to a server
596 Act as a TFTP server and boot the first received file
601 Boot image via network using RARP/TFTP protocol
606 Boot image via network using DHCP/TFTP protocol
612 Boot image via network using PXE protocol
618 Boot image via network using NFS protocol.
623 Enable MII utility commands.
628 Send ICMP ECHO_REQUEST to network host
633 Perform CDP network configuration
638 Synchronize RTC via network
643 Lookup the IP of a hostname
645 config CMD_LINK_LOCAL
648 Acquire a network IP address using the link-local protocol
655 bool "Enable 'bmp' command"
656 depends on LCD || DM_VIDEO || VIDEO
658 This provides a way to obtain information about a BMP-format iamge
659 and to display it. BMP (which presumably stands for BitMaP) is a
660 file format defined by Microsoft which supports images of various
661 depths, formats and compression methods. Headers on the file
662 determine the formats used. This command can be used by first loading
663 the image into RAM, then using this command to look at it or display
667 bool "Enable board-specific commands"
669 (deprecated: instead, please define a Kconfig option for each command)
671 Some boards have board-specific commands which are only enabled
672 during developemnt and need to be turned off for production. This
673 option provides a way to control this. The commands that are enabled
674 vary depending on the board.
676 config CMD_BKOPS_ENABLE
677 bool "mmc bkops enable"
681 Enable command for setting manual background operations handshake
682 on a eMMC device. The feature is optionally available on eMMC devices
683 conforming to standard >= 4.41.
685 config CMD_BLOCK_CACHE
686 bool "blkcache - control and stats for block cache"
687 depends on BLOCK_CACHE
688 default y if BLOCK_CACHE
690 Enable the blkcache command, which can be used to control the
691 operation of the cache functions.
692 This is most useful when fine-tuning the operation of the cache
693 during development, but also allows the cache to be disabled when
694 it might hurt performance (e.g. when using the ums command).
697 bool "icache or dcache"
699 Enable the "icache" and "dcache" commands
705 Enable the 'led' command which allows for control of LEDs supported
706 by the board. The LEDs can be listed with 'led list' and controlled
707 with led on/off/togle/blink. Any LED drivers can be controlled with
708 this command, e.g. led_gpio.
713 Run commands and summarize execution time.
715 # TODO: rename to CMD_SLEEP
720 Delay execution for some time
725 Access the system timer.
728 bool "getdcr, setdcr, getidcr, setidcr"
732 getdcr - Get an AMCC PPC 4xx DCR's value
733 setdcr - Set an AMCC PPC 4xx DCR's value
734 getidcr - Get a register value via indirect DCR addressing
735 setidcr - Set a register value via indirect DCR addressing
741 This provides basic access to the U-Boot's sound support. The main
742 feature is to play a beep.
744 sound init - set up sound system
745 sound play - play a sound
751 This provides access to the QEMU firmware interface. The main
752 feature is to allow easy loading of files passed to qemu-system
753 via -kernel / -initrd
755 source "cmd/mvebu/Kconfig"
760 bool "Enable the 'bootstage' command"
763 Add a 'bootstage' command which supports printing a report
764 and un/stashing of bootstage data.
766 menu "Power commands"
768 bool "Enable Driver Model PMIC command"
771 This is the pmic command, based on a driver model pmic's API.
772 Command features are unchanged:
773 - list - list pmic devices
774 - pmic dev <id> - show or [set] operating pmic device (NEW)
775 - pmic dump - dump registers
776 - pmic read address - read byte of register at address
777 - pmic write address - write byte to register at address
778 The only one change for this command is 'dev' subcommand.
781 bool "Enable Driver Model REGULATOR command"
782 depends on DM_REGULATOR
784 This command is based on driver model regulator's API.
785 User interface features:
786 - list - list regulator devices
787 - regulator dev <id> - show or [set] operating regulator device
788 - regulator info - print constraints info
789 - regulator status - print operating status
790 - regulator value <val] <-f> - print/[set] voltage value [uV]
791 - regulator current <val> - print/[set] current value [uA]
792 - regulator mode <id> - print/[set] operating mode id
793 - regulator enable - enable the regulator output
794 - regulator disable - disable the regulator output
796 The '-f' (force) option can be used for set the value which exceeds
797 the limits, which are found in device-tree and are kept in regulator's
798 uclass platdata structure.
802 menu "Security commands"
804 bool "Enable the 'aes' command"
807 This provides a means to encrypt and decrypt data using the AES
808 (Advanced Encryption Standard). This algorithm uses a symetric key
809 and is widely used as a streaming cipher. Different key lengths are
810 supported by the algorithm but this command only supports 128 bits
814 bool "Enable the 'blob' command"
816 This is used with the Freescale secure boot mechanism.
818 Freescale's SEC block has built-in Blob Protocol which provides
819 a method for protecting user-defined data across system power
820 cycles. SEC block protects data in a data structure called a Blob,
821 which provides both confidentiality and integrity protection.
823 Encapsulating data as a blob
824 Each time that the Blob Protocol is used to protect data, a
825 different randomly generated key is used to encrypt the data.
826 This random key is itself encrypted using a key which is derived
827 from SoC's non-volatile secret key and a 16 bit Key identifier.
828 The resulting encrypted key along with encrypted data is called a
829 blob. The non-volatile secure key is available for use only during
832 During decapsulation, the reverse process is performed to get back
836 blob enc - encapsulating data as a cryptgraphic blob
837 blob dec - decapsulating cryptgraphic blob to get the data
841 blob enc src dst len km
843 Encapsulate and create blob of data $len bytes long
844 at address $src and store the result at address $dst.
845 $km is the 16 byte key modifier is also required for
846 generation/use as key for cryptographic operation. Key
847 modifier should be 16 byte long.
849 blob dec src dst len km
851 Decapsulate the blob of data at address $src and
852 store result of $len byte at addr $dst.
853 $km is the 16 byte key modifier is also required for
854 generation/use as key for cryptographic operation. Key
855 modifier should be 16 byte long.
858 bool "Enable the 'tpm' command"
861 This provides a means to talk to a TPM from the command line. A wide
862 range of commands if provided - see 'tpm help' for details. The
863 command requires a suitable TPM on your board and the correct driver
867 bool "Enable the 'tpm test' command"
870 This provides a a series of tests to confirm that the TPM is working
871 correctly. The tests cover initialisation, non-volatile RAM, extend,
872 global lock and checking that timing is within expectations. The
873 tests pass correctly on Infineon TPMs but may need to be adjusted
878 menu "Firmware commands"
880 bool "Enable crosec command"
884 Enable command-line access to the Chrome OS EC (Embedded
885 Controller). This provides the 'crosec' command which has
886 a number of sub-commands for performing EC tasks such as
887 updating its flash, accessing a small saved context area
888 and talking to the I2C bus behind the EC (if there is one).
891 menu "Filesystem commands"
893 bool "Enable the 'cbfs' command"
896 Define this to enable support for reading from a Coreboot
897 filesystem. This is a ROM-based filesystem used for accessing files
898 on systems that use coreboot as the first boot-loader and then load
899 U-Boot to actually boot the Operating System. Available commands are
900 cbfsinit, cbfsinfo, cbfsls and cbfsload.
903 bool "Enable the 'cramfs' command"
906 This provides commands for dealing with CRAMFS (Compressed ROM
907 filesystem). CRAMFS is useful when space is tight since files are
908 compressed. Two commands are provided:
910 cramfsls - lists files in a cramfs image
911 cramfsload - loads a file from a cramfs image
914 bool "ext2 command support"
916 Enables EXT2 FS command
919 bool "ext4 command support"
921 Enables EXT4 FS command
923 config CMD_EXT4_WRITE
925 bool "ext4 write command support"
927 Enables EXT4 FS write command
930 bool "FAT command support"
932 Support for the FAT fs
934 config CMD_FS_GENERIC
935 bool "filesystem commands"
937 Enables filesystem commands (e.g. load, ls) that work for multiple
941 bool "fsuuid command"
943 Enables fsuuid command for filesystem UUID.
946 depends on ARCH_SUNXI
947 bool "MTD partition support"
949 MTD partition support
951 config MTDIDS_DEFAULT
952 string "Default MTD IDs"
953 depends on CMD_MTDPARTS
955 Defines a default MTD ID
957 config MTDPARTS_DEFAULT
958 string "Default MTD partition scheme"
959 depends on CMD_MTDPARTS
961 Defines a default MTD partitioning scheme in the Linux MTD command
962 line partitions format
966 menu "Debug commands"
971 The bedbug (emBEDded deBUGger) command provides debugging features
972 for some PowerPC processors. For details please see the
973 docuemntation in doc/README.beddbug
978 tristate "Enable UBI - Unsorted block images commands"
981 default y if NAND_SUNXI
983 UBI is a software layer above MTD layer which admits use of LVM-like
984 logical volumes on top of MTD devices, hides some complexities of
985 flash chips like wear and bad blocks and provides some other useful
986 capabilities. Please, consult the MTD web site for more details
987 (www.linux-mtd.infradead.org). Activate this option if you want
988 to use U-Boot UBI commands.
991 tristate "Enable UBIFS - Unsorted block images filesystem commands"
994 select RBTREE if ARCH_SUNXI
995 select LZO if ARCH_SUNXI
996 default y if NAND_SUNXI
998 UBIFS is a file system for flash devices which works on top of UBI.
projects / platform / kernel / u-boot.git / blob