board/freescale/t1040qds/eth.c

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * The RGMII PHYs are provided by the two on-board PHY connected to
   9  * dTSEC instances 4 and 5. The SGMII PHYs are provided by one on-board
  10  * PHY or by the standard four-port SGMII riser card (VSC).
  11  */
  12
  13 #include <common.h>
  14 #include <netdev.h>
  15 #include <asm/fsl_serdes.h>
  16 #include <asm/immap_85xx.h>
  17 #include <fm_eth.h>
  18 #include <fsl_mdio.h>
  19 #include <malloc.h>
  20 #include <fsl_dtsec.h>
  21 #include <vsc9953.h>
  22
  23 #include "../common/fman.h"
  24 #include "../common/qixis.h"
  25
  26 #include "t1040qds_qixis.h"
  27
  28 #ifdef CONFIG_FMAN_ENET
  29  /* - In T1040 there are only 8 SERDES lanes, spread across 2 SERDES banks.
  30  *   Bank 1 -> Lanes A, B, C, D
  31  *   Bank 2 -> Lanes E, F, G, H
  32  */
  33
  34  /* Mapping of 8 SERDES lanes to T1040 QDS board slots. A value of '0' here
  35   * means that the mapping must be determined dynamically, or that the lane
  36   * maps to something other than a board slot.
  37   */
  38 static u8 lane_to_slot[] = {
  39         0, 0, 0, 0, 0, 0, 0, 0
  40 };
  41
  42 /* On the Vitesse VSC8234XHG SGMII riser card there are 4 SGMII PHYs
  43  * housed.
  44  */
  45 static int riser_phy_addr[] = {
  46         CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR,
  47         CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR,
  48         CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR,
  49         CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR,
  50 };
  51
  52 /* Slot2 does not have EMI connections */
  53 #define EMI_NONE        0xFFFFFFFF
  54 #define EMI1_RGMII0     0
  55 #define EMI1_RGMII1     1
  56 #define EMI1_SLOT1      2
  57 #define EMI1_SLOT3      3
  58 #define EMI1_SLOT4      4
  59 #define EMI1_SLOT5      5
  60 #define EMI1_SLOT6      6
  61 #define EMI1_SLOT7      7
  62 #define EMI2            8
  63
  64 static int mdio_mux[NUM_FM_PORTS];
  65
  66 static const char * const mdio_names[] = {
  67         "T1040_QDS_MDIO0",
  68         "T1040_QDS_MDIO1",
  69         "T1040_QDS_MDIO2",
  70         "T1040_QDS_MDIO3",
  71         "T1040_QDS_MDIO4",
  72         "T1040_QDS_MDIO5",
  73         "T1040_QDS_MDIO6",
  74         "T1040_QDS_MDIO7",
  75 };
  76
  77 struct t1040_qds_mdio {
  78         u8 muxval;
  79         struct mii_dev *realbus;
  80 };
  81
  82 static const char *t1040_qds_mdio_name_for_muxval(u8 muxval)
  83 {
  84         return mdio_names[muxval];
  85 }
  86
  87 struct mii_dev *mii_dev_for_muxval(u8 muxval)
  88 {
  89         struct mii_dev *bus;
  90         const char *name = t1040_qds_mdio_name_for_muxval(muxval);
  91
  92         if (!name) {
  93                 printf("No bus for muxval %x\n", muxval);
  94                 return NULL;
  95         }
  96
  97         bus = miiphy_get_dev_by_name(name);
  98
  99         if (!bus) {
 100                 printf("No bus by name %s\n", name);
 101                 return NULL;
 102         }
 103
 104         return bus;
 105 }
 106
 107 static void t1040_qds_mux_mdio(u8 muxval)
 108 {
 109         u8 brdcfg4;
 110         if (muxval <= 7) {
 111                 brdcfg4 = QIXIS_READ(brdcfg[4]);
 112                 brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
 113                 brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
 114                 QIXIS_WRITE(brdcfg[4], brdcfg4);
 115         }
 116 }
 117
 118 static int t1040_qds_mdio_read(struct mii_dev *bus, int addr, int devad,
 119                                 int regnum)
 120 {
 121         struct t1040_qds_mdio *priv = bus->priv;
 122
 123         t1040_qds_mux_mdio(priv->muxval);
 124
 125         return priv->realbus->read(priv->realbus, addr, devad, regnum);
 126 }
 127
 128 static int t1040_qds_mdio_write(struct mii_dev *bus, int addr, int devad,
 129                                 int regnum, u16 value)
 130 {
 131         struct t1040_qds_mdio *priv = bus->priv;
 132
 133         t1040_qds_mux_mdio(priv->muxval);
 134
 135         return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
 136 }
 137
 138 static int t1040_qds_mdio_reset(struct mii_dev *bus)
 139 {
 140         struct t1040_qds_mdio *priv = bus->priv;
 141
 142         return priv->realbus->reset(priv->realbus);
 143 }
 144
 145 static int t1040_qds_mdio_init(char *realbusname, u8 muxval)
 146 {
 147         struct t1040_qds_mdio *pmdio;
 148         struct mii_dev *bus = mdio_alloc();
 149
 150         if (!bus) {
 151                 printf("Failed to allocate t1040_qds MDIO bus\n");
 152                 return -1;
 153         }
 154
 155         pmdio = malloc(sizeof(*pmdio));
 156         if (!pmdio) {
 157                 printf("Failed to allocate t1040_qds private data\n");
 158                 free(bus);
 159                 return -1;
 160         }
 161
 162         bus->read = t1040_qds_mdio_read;
 163         bus->write = t1040_qds_mdio_write;
 164         bus->reset = t1040_qds_mdio_reset;
 165         strcpy(bus->name, t1040_qds_mdio_name_for_muxval(muxval));
 166
 167         pmdio->realbus = miiphy_get_dev_by_name(realbusname);
 168
 169         if (!pmdio->realbus) {
 170                 printf("No bus with name %s\n", realbusname);
 171                 free(bus);
 172                 free(pmdio);
 173                 return -1;
 174         }
 175
 176         pmdio->muxval = muxval;
 177         bus->priv = pmdio;
 178
 179         return mdio_register(bus);
 180 }
 181
 182 /*
 183  * Initialize the lane_to_slot[] array.
 184  *
 185  * On the T1040QDS board the mapping is controlled by ?? register.
 186  */
 187 static void initialize_lane_to_slot(void)
 188 {
 189         ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
 190         int serdes1_prtcl = (in_be32(&gur->rcwsr[4]) &
 191                                 FSL_CORENET2_RCWSR4_SRDS1_PRTCL)
 192                 >> FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
 193
 194         QIXIS_WRITE(cms[0], 0x07);
 195
 196         switch (serdes1_prtcl) {
 197         case 0x60:
 198         case 0x66:
 199         case 0x67:
 200         case 0x69:
 201                 lane_to_slot[1] = 7;
 202                 lane_to_slot[2] = 6;
 203                 lane_to_slot[3] = 5;
 204                 break;
 205         case 0x86:
 206                 lane_to_slot[1] = 7;
 207                 lane_to_slot[2] = 7;
 208                 lane_to_slot[3] = 7;
 209                 break;
 210         case 0x87:
 211                 lane_to_slot[1] = 7;
 212                 lane_to_slot[2] = 7;
 213                 lane_to_slot[3] = 7;
 214                 lane_to_slot[7] = 7;
 215                 break;
 216         case 0x89:
 217                 lane_to_slot[1] = 7;
 218                 lane_to_slot[2] = 7;
 219                 lane_to_slot[3] = 7;
 220                 lane_to_slot[6] = 7;
 221                 lane_to_slot[7] = 7;
 222                 break;
 223         case 0x8d:
 224                 lane_to_slot[1] = 7;
 225                 lane_to_slot[2] = 7;
 226                 lane_to_slot[3] = 7;
 227                 lane_to_slot[5] = 3;
 228                 lane_to_slot[6] = 3;
 229                 lane_to_slot[7] = 3;
 230                 break;
 231         case 0x8F:
 232         case 0x85:
 233                 lane_to_slot[1] = 7;
 234                 lane_to_slot[2] = 6;
 235                 lane_to_slot[3] = 5;
 236                 lane_to_slot[6] = 3;
 237                 lane_to_slot[7] = 3;
 238                 break;
 239         case 0xA5:
 240                 lane_to_slot[1] = 7;
 241                 lane_to_slot[6] = 3;
 242                 lane_to_slot[7] = 3;
 243                 break;
 244         case 0xA7:
 245                 lane_to_slot[1] = 7;
 246                 lane_to_slot[2] = 6;
 247                 lane_to_slot[3] = 5;
 248                 lane_to_slot[7] = 7;
 249                 break;
 250         case 0xAA:
 251                 lane_to_slot[1] = 7;
 252                 lane_to_slot[6] = 7;
 253                 lane_to_slot[7] = 7;
 254                 break;
 255         case 0x40:
 256                 lane_to_slot[2] = 7;
 257                 lane_to_slot[3] = 7;
 258                 break;
 259         default:
 260                 printf("qds: Fman: Unsupported SerDes Protocol 0x%02x\n",
 261                        serdes1_prtcl);
 262                 break;
 263         }
 264 }
 265
 266 /*
 267  * Given the following ...
 268  *
 269  * 1) A pointer to an Fman Ethernet node (as identified by the 'compat'
 270  * compatible string and 'addr' physical address)
 271  *
 272  * 2) An Fman port
 273  *
 274  * ... update the phy-handle property of the Ethernet node to point to the
 275  * right PHY. This assumes that we already know the PHY for each port.
 276  *
 277  * The offset of the Fman Ethernet node is also passed in for convenience, but
 278  * it is not used, and we recalculate the offset anyway.
 279  *
 280  * Note that what we call "Fman ports" (enum fm_port) is really an Fman MAC.
 281  * Inside the Fman, "ports" are things that connect to MACs. We only call them
 282  * ports in U-Boot because on previous Ethernet devices (e.g. Gianfar), MACs
 283  * and ports are the same thing.
 284  *
 285  */
 286 void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
 287                               enum fm_port port, int offset)
 288 {
 289         phy_interface_t intf = fm_info_get_enet_if(port);
 290         char phy[16];
 291
 292         /* The RGMII PHY is identified by the MAC connected to it */
 293         if (intf == PHY_INTERFACE_MODE_RGMII) {
 294                 sprintf(phy, "rgmii_phy%u", port == FM1_DTSEC4 ? 1 : 2);
 295                 fdt_set_phy_handle(fdt, compat, addr, phy);
 296         }
 297
 298         /* The SGMII PHY is identified by the MAC connected to it */
 299         if (intf == PHY_INTERFACE_MODE_SGMII) {
 300                 int lane = serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC1
 301                                                  + port);
 302                 u8 slot;
 303                 if (lane < 0)
 304                         return;
 305                 slot = lane_to_slot[lane];
 306                 if (slot) {
 307                         /* Slot housing a SGMII riser card */
 308                         sprintf(phy, "phy_s%x_%02x", slot,
 309                                 (fm_info_get_phy_address(port - FM1_DTSEC1)-
 310                                 CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR + 1));
 311                         fdt_set_phy_handle(fdt, compat, addr, phy);
 312                 }
 313         }
 314 }
 315
 316 void fdt_fixup_board_enet(void *fdt)
 317 {
 318         int i, lane, idx;
 319
 320         for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
 321                 idx = i - FM1_DTSEC1;
 322                 switch (fm_info_get_enet_if(i)) {
 323                 case PHY_INTERFACE_MODE_SGMII:
 324                         lane = serdes_get_first_lane(FSL_SRDS_1,
 325                                                      SGMII_FM1_DTSEC1 + idx);
 326                         if (lane < 0)
 327                                 break;
 328
 329                         switch (mdio_mux[i]) {
 330                         case EMI1_SLOT3:
 331                                 fdt_status_okay_by_alias(fdt, "emi1_slot3");
 332                                 break;
 333                         case EMI1_SLOT5:
 334                                 fdt_status_okay_by_alias(fdt, "emi1_slot5");
 335                                 break;
 336                         case EMI1_SLOT6:
 337                                 fdt_status_okay_by_alias(fdt, "emi1_slot6");
 338                                 break;
 339                         case EMI1_SLOT7:
 340                                 fdt_status_okay_by_alias(fdt, "emi1_slot7");
 341                                 break;
 342                         }
 343                 break;
 344                 case PHY_INTERFACE_MODE_RGMII:
 345                         if (i == FM1_DTSEC4)
 346                                 fdt_status_okay_by_alias(fdt, "emi1_rgmii0");
 347
 348                         if (i == FM1_DTSEC5)
 349                                 fdt_status_okay_by_alias(fdt, "emi1_rgmii1");
 350                         break;
 351                 default:
 352                         break;
 353                 }
 354         }
 355 }
 356 #endif /* #ifdef CONFIG_FMAN_ENET */
 357
 358 static void set_brdcfg9_for_gtx_clk(void)
 359 {
 360         u8 brdcfg9;
 361         brdcfg9 = QIXIS_READ(brdcfg[9]);
 362 /* Initializing EPHY2 clock to RGMII mode */
 363         brdcfg9 &= ~(BRDCFG9_EPHY2_MASK);
 364         brdcfg9 |= (BRDCFG9_EPHY2_VAL);
 365         QIXIS_WRITE(brdcfg[9], brdcfg9);
 366 }
 367
 368 void t1040_handle_phy_interface_sgmii(int i)
 369 {
 370         int lane, idx, slot;
 371         idx = i - FM1_DTSEC1;
 372         lane = serdes_get_first_lane(FSL_SRDS_1,
 373                         SGMII_FM1_DTSEC1 + idx);
 374
 375         if (lane < 0)
 376                 return;
 377         slot = lane_to_slot[lane];
 378
 379         switch (slot) {
 380         case 1:
 381                 mdio_mux[i] = EMI1_SLOT1;
 382                 fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
 383                 break;
 384         case 3:
 385                 if (FM1_DTSEC4 == i)
 386                         fm_info_set_phy_address(i, riser_phy_addr[0]);
 387                 if (FM1_DTSEC5 == i)
 388                         fm_info_set_phy_address(i, riser_phy_addr[1]);
 389
 390                 mdio_mux[i] = EMI1_SLOT3;
 391
 392                 fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
 393                 break;
 394         case 4:
 395                 mdio_mux[i] = EMI1_SLOT4;
 396                 fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
 397                 break;
 398         case 5:
 399                 /* Slot housing a SGMII riser card? */
 400                 fm_info_set_phy_address(i, riser_phy_addr[0]);
 401                 mdio_mux[i] = EMI1_SLOT5;
 402                 fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
 403                 break;
 404         case 6:
 405                 /* Slot housing a SGMII riser card? */
 406                 fm_info_set_phy_address(i, riser_phy_addr[0]);
 407                 mdio_mux[i] = EMI1_SLOT6;
 408                 fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
 409                 break;
 410         case 7:
 411                 if (FM1_DTSEC1 == i)
 412                         fm_info_set_phy_address(i, riser_phy_addr[0]);
 413                 if (FM1_DTSEC2 == i)
 414                         fm_info_set_phy_address(i, riser_phy_addr[1]);
 415                 if (FM1_DTSEC3 == i)
 416                         fm_info_set_phy_address(i, riser_phy_addr[2]);
 417                 if (FM1_DTSEC5 == i)
 418                         fm_info_set_phy_address(i, riser_phy_addr[3]);
 419
 420                 mdio_mux[i] = EMI1_SLOT7;
 421                 fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
 422                 break;
 423         default:
 424                 break;
 425         }
 426         fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
 427 }
 428 void t1040_handle_phy_interface_rgmii(int i)
 429 {
 430         fm_info_set_phy_address(i, i == FM1_DTSEC5 ?
 431                         CONFIG_SYS_FM1_DTSEC5_PHY_ADDR :
 432                         CONFIG_SYS_FM1_DTSEC4_PHY_ADDR);
 433         mdio_mux[i] = (i == FM1_DTSEC5) ? EMI1_RGMII1 :
 434                 EMI1_RGMII0;
 435         fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
 436 }
 437
 438 int board_eth_init(bd_t *bis)
 439 {
 440 #ifdef CONFIG_FMAN_ENET
 441         struct memac_mdio_info memac_mdio_info;
 442         unsigned int i;
 443 #ifdef CONFIG_VSC9953
 444         int lane;
 445         int phy_addr;
 446         phy_interface_t phy_int;
 447         struct mii_dev *bus;
 448 #endif
 449
 450         printf("Initializing Fman\n");
 451         set_brdcfg9_for_gtx_clk();
 452
 453         initialize_lane_to_slot();
 454
 455         /* Initialize the mdio_mux array so we can recognize empty elements */
 456         for (i = 0; i < NUM_FM_PORTS; i++)
 457                 mdio_mux[i] = EMI_NONE;
 458
 459         memac_mdio_info.regs =
 460                 (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
 461         memac_mdio_info.name = DEFAULT_FM_MDIO_NAME;
 462
 463         /* Register the real 1G MDIO bus */
 464         fm_memac_mdio_init(bis, &memac_mdio_info);
 465
 466         /* Register the muxing front-ends to the MDIO buses */
 467         t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII0);
 468         t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII1);
 469         t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1);
 470         t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3);
 471         t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4);
 472         t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5);
 473         t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT6);
 474         t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT7);
 475
 476         /*
 477          * Program on board RGMII PHY addresses. If the SGMII Riser
 478          * card used, we'll override the PHY address later. For any DTSEC that
 479          * is RGMII, we'll also override its PHY address later. We assume that
 480          * DTSEC4 and DTSEC5 are used for RGMII.
 481          */
 482         fm_info_set_phy_address(FM1_DTSEC4, CONFIG_SYS_FM1_DTSEC4_PHY_ADDR);
 483         fm_info_set_phy_address(FM1_DTSEC5, CONFIG_SYS_FM1_DTSEC5_PHY_ADDR);
 484
 485         for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
 486                 switch (fm_info_get_enet_if(i)) {
 487                 case PHY_INTERFACE_MODE_QSGMII:
 488                         fm_info_set_mdio(i, NULL);
 489                         break;
 490                 case PHY_INTERFACE_MODE_SGMII:
 491                         t1040_handle_phy_interface_sgmii(i);
 492                         break;
 493
 494                 case PHY_INTERFACE_MODE_RGMII:
 495                         /* Only DTSEC4 and DTSEC5 can be routed to RGMII */
 496                         t1040_handle_phy_interface_rgmii(i);
 497                         break;
 498                 default:
 499                         break;
 500                 }
 501         }
 502
 503 #ifdef CONFIG_VSC9953
 504         for (i = 0; i < VSC9953_MAX_PORTS; i++) {
 505                 lane = -1;
 506                 phy_addr = 0;
 507                 phy_int = PHY_INTERFACE_MODE_NONE;
 508                 switch (i) {
 509                 case 0:
 510                 case 1:
 511                 case 2:
 512                 case 3:
 513                         lane = serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_A);
 514                         /* PHYs connected over QSGMII */
 515                         if (lane >= 0) {
 516                                 phy_addr = CONFIG_SYS_FM1_QSGMII21_PHY_ADDR +
 517                                                 i;
 518                                 phy_int = PHY_INTERFACE_MODE_QSGMII;
 519                                 break;
 520                         }
 521                         lane = serdes_get_first_lane(FSL_SRDS_1,
 522                                         SGMII_SW1_MAC1 + i);
 523
 524                         if (lane < 0)
 525                                 break;
 526
 527                         /* PHYs connected over QSGMII */
 528                         if (i != 3 || lane_to_slot[lane] == 7)
 529                                 phy_addr = CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR
 530                                         + i;
 531                         else
 532                                 phy_addr = CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR;
 533                         phy_int = PHY_INTERFACE_MODE_SGMII;
 534                         break;
 535                 case 4:
 536                 case 5:
 537                 case 6:
 538                 case 7:
 539                         lane = serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_B);
 540                         /* PHYs connected over QSGMII */
 541                         if (lane >= 0) {
 542                                 phy_addr = CONFIG_SYS_FM1_QSGMII11_PHY_ADDR +
 543                                                 i - 4;
 544                                 phy_int = PHY_INTERFACE_MODE_QSGMII;
 545                                 break;
 546                         }
 547                         lane = serdes_get_first_lane(FSL_SRDS_1,
 548                                         SGMII_SW1_MAC1 + i);
 549                         /* PHYs connected over SGMII */
 550                         if (lane >= 0) {
 551                                 phy_addr = CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR
 552                                                 + i - 3;
 553                                 phy_int = PHY_INTERFACE_MODE_SGMII;
 554                         }
 555                         break;
 556                 case 8:
 557                         if (serdes_get_first_lane(FSL_SRDS_1,
 558                                                   SGMII_FM1_DTSEC1) < 0)
 559                                 /* FM1@DTSEC1 is connected to SW1@PORT8 */
 560                                 vsc9953_port_enable(i);
 561                         break;
 562                 case 9:
 563                         if (serdes_get_first_lane(FSL_SRDS_1,
 564                                                   SGMII_FM1_DTSEC2) < 0) {
 565                                 /* Enable L2 On MAC2 using SCFG */
 566                                 struct ccsr_scfg *scfg = (struct ccsr_scfg *)
 567                                                 CONFIG_SYS_MPC85xx_SCFG;
 568
 569                                 out_be32(&scfg->esgmiiselcr,
 570                                          in_be32(&scfg->esgmiiselcr) |
 571                                          (0x80000000));
 572                                 vsc9953_port_enable(i);
 573                         }
 574                         break;
 575                 }
 576
 577                 if (lane >= 0) {
 578                         bus = mii_dev_for_muxval(lane_to_slot[lane]);
 579                         vsc9953_port_info_set_mdio(i, bus);
 580                         vsc9953_port_enable(i);
 581                 }
 582                 vsc9953_port_info_set_phy_address(i, phy_addr);
 583                 vsc9953_port_info_set_phy_int(i, phy_int);
 584         }
 585
 586 #endif
 587         cpu_eth_init(bis);
 588 #endif
 589
 590         return pci_eth_init(bis);
 591 }