board/atmel/at91sam9260ek/at91sam9260ek.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * (C) Copyright 2007-2008
   4  * Stelian Pop <stelian@popies.net>
   5  * Lead Tech Design <www.leadtechdesign.com>
   6  */
   7
   8 #include <common.h>
   9 #include <debug_uart.h>
  10 #include <init.h>
  11 #include <net.h>
  12 #include <asm/global_data.h>
  13 #include <asm/io.h>
  14 #include <asm/arch/at91sam9260_matrix.h>
  15 #include <asm/arch/at91sam9_smc.h>
  16 #include <asm/arch/at91_common.h>
  17 #include <asm/arch/clk.h>
  18 #include <asm/arch/gpio.h>
  19
  20 DECLARE_GLOBAL_DATA_PTR;
  21
  22 /* ------------------------------------------------------------------------- */
  23 /*
  24  * Miscelaneous platform dependent initialisations
  25  */
  26
  27 #ifdef CONFIG_CMD_NAND
  28 static void at91sam9260ek_nand_hw_init(void)
  29 {
  30         struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
  31         struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
  32         unsigned long csa;
  33
  34         /* Assign CS3 to NAND/SmartMedia Interface */
  35         csa = readl(&matrix->ebicsa);
  36         csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA;
  37         writel(csa, &matrix->ebicsa);
  38
  39         /* Configure SMC CS3 for NAND/SmartMedia */
  40         writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
  41                 AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
  42                 &smc->cs[3].setup);
  43         writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
  44                 AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
  45                 &smc->cs[3].pulse);
  46         writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
  47                 &smc->cs[3].cycle);
  48         writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
  49                 AT91_SMC_MODE_EXNW_DISABLE |
  50 #ifdef CONFIG_SYS_NAND_DBW_16
  51                 AT91_SMC_MODE_DBW_16 |
  52 #else /* CONFIG_SYS_NAND_DBW_8 */
  53                 AT91_SMC_MODE_DBW_8 |
  54 #endif
  55                 AT91_SMC_MODE_TDF_CYCLE(2),
  56                 &smc->cs[3].mode);
  57
  58         /* Configure RDY/BSY */
  59         at91_set_gpio_input(CFG_SYS_NAND_READY_PIN, 1);
  60
  61         /* Enable NandFlash */
  62         at91_set_gpio_output(CFG_SYS_NAND_ENABLE_PIN, 1);
  63
  64 }
  65 #endif
  66
  67 #ifdef CONFIG_DEBUG_UART_BOARD_INIT
  68 void board_debug_uart_init(void)
  69 {
  70         at91_seriald_hw_init();
  71 }
  72 #endif
  73
  74 #ifdef CONFIG_BOARD_EARLY_INIT_F
  75 int board_early_init_f(void)
  76 {
  77         return 0;
  78 }
  79 #endif
  80
  81 int board_init(void)
  82 {
  83         /* adress of boot parameters */
  84         gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
  85
  86 #ifdef CONFIG_CMD_NAND
  87         at91sam9260ek_nand_hw_init();
  88 #endif
  89         return 0;
  90 }
  91
  92 int dram_init(void)
  93 {
  94         gd->ram_size = get_ram_size(
  95                 (void *)CONFIG_SYS_SDRAM_BASE,
  96                 CONFIG_SYS_SDRAM_SIZE);
  97         return 0;
  98 }
  99
 100 #ifdef CONFIG_RESET_PHY_R
 101 void reset_phy(void)
 102 {
 103 }
 104 #endif