1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2011 Andes Technology Corporation
4 * Nobuhiro Lin, Andes Technology Corporation <nobuhiro@andestech.com>
5 * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
11 /* Hardware register bases */
14 #define CONFIG_FTAHBC020S_BASE 0x90100000
15 /* Static Memory Controller (SRAM) */
16 #define CONFIG_FTSMC020_BASE 0x90200000
17 /* FTSDMC021 SDRAM Controller */
18 #define CONFIG_FTSDMC021_BASE 0x90300000
20 #define CONFIG_FTDMAC020_BASE 0x90400000
21 /* AHB-to-APB Bridge */
22 #define CONFIG_FTAPBBRG020S_01_BASE 0x90500000
24 #define CONFIG_FTLCDC100_BASE 0x90600000
26 #define CONFIG_RESERVED_01_BASE 0x90700000
28 #define CONFIG_RESERVED_02_BASE 0x90800000
30 #define CONFIG_FTMAC100_BASE 0x90900000
31 /* External USB host */
32 #define CONFIG_EXT_USB_HOST_BASE 0x90A00000
34 #define CONFIG_USB_DEV_BASE 0x90B00000
35 /* External AHB-to-PCI Bridge (FTPCI100 not exist in ag101) */
36 #define CONFIG_EXT_AHBPCIBRG_BASE 0x90C00000
38 #define CONFIG_RESERVED_03_BASE 0x90D00000
39 /* External AHB-to-APB Bridger (FTAPBBRG020S_02) */
40 #define CONFIG_EXT_AHBAPBBRG_BASE 0x90E00000
41 /* External AHB slave1 (LCD) */
42 #define CONFIG_EXT_AHBSLAVE01_BASE 0x90F00000
43 /* External AHB slave2 (FUSBH200) */
44 #define CONFIG_EXT_AHBSLAVE02_BASE 0x92000000
46 /* APB Device definitions */
48 /* Power Management Unit */
49 #define CONFIG_FTPMU010_BASE 0x98100000
50 /* BT UART 2/IrDA (UART 01 in Linux) */
51 #define CONFIG_FTUART010_01_BASE 0x98300000
53 #define CONFIG_FTTMR010_BASE 0x98400000
55 #define CONFIG_FTWDT010_BASE 0x98500000
57 #define CONFIG_FTRTC010_BASE 0x98600000
59 #define CONFIG_FTGPIO010_BASE 0x98700000
60 /* Interrupt Controller */
61 #define CONFIG_FTINTC010_BASE 0x98800000
63 #define CONFIG_FTIIC010_BASE 0x98A00000
65 #define CONFIG_RESERVED_04_BASE 0x98C00000
66 /* Compat Flash Controller */
67 #define CONFIG_FTCFC010_BASE 0x98D00000
69 /* Synchronous Serial Port Controller (SSP) I2S/AC97 */
70 #define CONFIG_FTSSP010_02_BASE 0x99400000
71 /* ST UART ? SSP 02 (UART 02 in Linux) */
72 #define CONFIG_FTUART010_02_BASE 0x99600000
74 /* The following address was not defined in Linux */
77 #define CONFIG_FTUART010_03_BASE 0x98200000
78 /* Synchronous Serial Port Controller (SSP) 01 */
79 #define CONFIG_FTSSP010_01_BASE 0x98B00000
81 #define CONFIG_IRDA_BASE 0x98900000
82 /* PWM - Pulse Width Modulator Controller */
83 #define CONFIG_PMW_BASE 0x99100000
85 #endif /* __AG101_H */