Merge tag 'u-boot-stm32-20211012' of https://source.denx.de/u-boot/custodians/u-boot-stm
[platform/kernel/u-boot.git] / arch / arm / mach-socfpga / spl_a10.c
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  *  Copyright (C) 2012-2019 Altera Corporation <www.altera.com>
4  */
5
6 #include <common.h>
7 #include <cpu_func.h>
8 #include <hang.h>
9 #include <init.h>
10 #include <asm/global_data.h>
11 #include <asm/io.h>
12 #include <asm/pl310.h>
13 #include <asm/u-boot.h>
14 #include <asm/utils.h>
15 #include <image.h>
16 #include <asm/arch/reset_manager.h>
17 #include <spl.h>
18 #include <asm/arch/system_manager.h>
19 #include <asm/arch/freeze_controller.h>
20 #include <asm/arch/clock_manager.h>
21 #include <asm/arch/scan_manager.h>
22 #include <asm/arch/sdram.h>
23 #include <asm/arch/scu.h>
24 #include <asm/arch/misc.h>
25 #include <asm/arch/nic301.h>
26 #include <asm/sections.h>
27 #include <fdtdec.h>
28 #include <watchdog.h>
29 #include <asm/arch/pinmux.h>
30 #include <asm/arch/fpga_manager.h>
31 #include <mmc.h>
32 #include <memalign.h>
33
34 #define FPGA_BUFSIZ     16 * 1024
35
36 DECLARE_GLOBAL_DATA_PTR;
37
38 #define BOOTROM_SHARED_MEM_SIZE         0x800   /* 2KB */
39 #define BOOTROM_SHARED_MEM_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
40                                          SOCFPGA_PHYS_OCRAM_SIZE - \
41                                          BOOTROM_SHARED_MEM_SIZE)
42 #define RST_STATUS_SHARED_ADDR          (BOOTROM_SHARED_MEM_ADDR + 0x438)
43 static u32 rst_mgr_status __section(".data");
44
45 /*
46  * Bootrom will clear the status register in reset manager and stores the
47  * reset status value in shared memory. Bootrom stores shared data at last
48  * 2KB of onchip RAM.
49  * This function save reset status provided by BootROM to rst_mgr_status.
50  * More information about reset status register value can be found in reset
51  * manager register description.
52  * When running in debugger without Bootrom, r0 to r3 are random values.
53  * So, skip save the value when r0 is not BootROM shared data address.
54  *
55  * r0 - Contains the pointer to the shared memory block. The shared
56  *      memory block is located in the top 2 KB of on-chip RAM.
57  * r1 - contains the length of the shared memory.
58  * r2 - unused and set to 0x0.
59  * r3 - points to the version block.
60  */
61 void save_boot_params(unsigned long r0, unsigned long r1, unsigned long r2,
62                       unsigned long r3)
63 {
64         if (r0 == BOOTROM_SHARED_MEM_ADDR)
65                 rst_mgr_status = readl(RST_STATUS_SHARED_ADDR);
66
67         save_boot_params_ret();
68 }
69
70 u32 spl_boot_device(void)
71 {
72         const u32 bsel = readl(socfpga_get_sysmgr_addr() + SYSMGR_A10_BOOTINFO);
73
74         switch (SYSMGR_GET_BOOTINFO_BSEL(bsel)) {
75         case 0x1:       /* FPGA (HPS2FPGA Bridge) */
76                 return BOOT_DEVICE_RAM;
77         case 0x2:       /* NAND Flash (1.8V) */
78         case 0x3:       /* NAND Flash (3.0V) */
79                 socfpga_per_reset(SOCFPGA_RESET(NAND), 0);
80                 return BOOT_DEVICE_NAND;
81         case 0x4:       /* SD/MMC External Transceiver (1.8V) */
82         case 0x5:       /* SD/MMC Internal Transceiver (3.0V) */
83                 socfpga_per_reset(SOCFPGA_RESET(SDMMC), 0);
84                 socfpga_per_reset(SOCFPGA_RESET(DMA), 0);
85                 return BOOT_DEVICE_MMC1;
86         case 0x6:       /* QSPI Flash (1.8V) */
87         case 0x7:       /* QSPI Flash (3.0V) */
88                 socfpga_per_reset(SOCFPGA_RESET(QSPI), 0);
89                 return BOOT_DEVICE_SPI;
90         default:
91                 printf("Invalid boot device (bsel=%08x)!\n", bsel);
92                 hang();
93         }
94 }
95
96 #ifdef CONFIG_SPL_MMC
97 u32 spl_mmc_boot_mode(const u32 boot_device)
98 {
99 #if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
100         return MMCSD_MODE_FS;
101 #else
102         return MMCSD_MODE_RAW;
103 #endif
104 }
105 #endif
106
107 void spl_board_init(void)
108 {
109         ALLOC_CACHE_ALIGN_BUFFER(char, buf, FPGA_BUFSIZ);
110
111         /* enable console uart printing */
112         preloader_console_init();
113         WATCHDOG_RESET();
114
115         arch_early_init_r();
116
117         /* If the full FPGA is already loaded, ie.from EPCQ, config fpga pins */
118         if (is_fpgamgr_user_mode()) {
119                 int ret = config_pins(gd->fdt_blob, "shared");
120
121                 if (ret)
122                         return;
123
124                 ret = config_pins(gd->fdt_blob, "fpga");
125                 if (ret)
126                         return;
127         } else if (!is_fpgamgr_early_user_mode()) {
128                 /* Program IOSSM(early IO release) or full FPGA */
129                 fpgamgr_program(buf, FPGA_BUFSIZ, 0);
130         }
131
132         /* If the IOSSM/full FPGA is already loaded, start DDR */
133         if (is_fpgamgr_early_user_mode() || is_fpgamgr_user_mode())
134                 ddr_calibration_sequence();
135
136         if (!is_fpgamgr_user_mode())
137                 fpgamgr_program(buf, FPGA_BUFSIZ, 0);
138 }
139
140 void board_init_f(ulong dummy)
141 {
142         if (spl_early_init())
143                 hang();
144
145         socfpga_get_managers_addr();
146
147         dcache_disable();
148
149         socfpga_init_security_policies();
150         socfpga_sdram_remap_zero();
151         socfpga_pl310_clear();
152
153         /* Assert reset to all except L4WD0 and L4TIMER0 */
154         socfpga_per_reset_all();
155         socfpga_watchdog_disable();
156
157         /* Configure the clock based on handoff */
158         cm_basic_init(gd->fdt_blob);
159
160 #ifdef CONFIG_HW_WATCHDOG
161         /* release osc1 watchdog timer 0 from reset */
162         socfpga_reset_deassert_osc1wd0();
163
164         /* reconfigure and enable the watchdog */
165         hw_watchdog_init();
166         WATCHDOG_RESET();
167 #endif /* CONFIG_HW_WATCHDOG */
168
169         config_dedicated_pins(gd->fdt_blob);
170         WATCHDOG_RESET();
171 }