configs: Resync with savedefconfig
[platform/kernel/u-boot.git] / arch / arm / dts / socfpga_stratix10_socdk.dts
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (C) 2018 Intel Corporation
4  */
5
6 #include "socfpga_stratix10.dtsi"
7
8 / {
9         model = "SoCFPGA Stratix 10 SoCDK";
10
11         aliases {
12                 ethernet0 = &gmac0;
13                 i2c0 = &i2c1;
14                 serial0 = &uart0;
15         };
16
17         chosen {
18                 stdout-path = "serial0:115200n8";
19         };
20
21         leds {
22                 compatible = "gpio-leds";
23                 hps0 {
24                         label = "hps_led0";
25                         gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
26                 };
27
28                 hps1 {
29                         label = "hps_led1";
30                         gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
31                 };
32
33                 hps2 {
34                         label = "hps_led2";
35                         gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
36                 };
37         };
38
39         memory {
40                 #address-cells = <2>;
41                 #size-cells = <2>;
42                 device_type = "memory";
43                 /* 4GB */
44                 reg = <0 0x00000000 0 0x80000000>,
45                       <1 0x80000000 0 0x80000000>;
46                 u-boot,dm-pre-reloc;
47         };
48 };
49
50 &gpio1 {
51         status = "okay";
52 };
53
54 &gmac0 {
55         status = "okay";
56         phy-mode = "rgmii";
57         phy-handle = <&phy0>;
58
59         max-frame-size = <3800>;
60
61         mdio0 {
62                 #address-cells = <1>;
63                 #size-cells = <0>;
64                 compatible = "snps,dwmac-mdio";
65                 phy0: ethernet-phy@0 {
66                         reg = <4>;
67
68                         txd0-skew-ps = <0>; /* -420ps */
69                         txd1-skew-ps = <0>; /* -420ps */
70                         txd2-skew-ps = <0>; /* -420ps */
71                         txd3-skew-ps = <0>; /* -420ps */
72                         rxd0-skew-ps = <420>; /* 0ps */
73                         rxd1-skew-ps = <420>; /* 0ps */
74                         rxd2-skew-ps = <420>; /* 0ps */
75                         rxd3-skew-ps = <420>; /* 0ps */
76                         txen-skew-ps = <0>; /* -420ps */
77                         txc-skew-ps = <900>; /* 0ps */
78                         rxdv-skew-ps = <420>; /* 0ps */
79                         rxc-skew-ps = <1680>; /* 780ps */
80                 };
81         };
82 };
83
84 &i2c1 {
85         status = "okay";
86 };
87
88 &mmc {
89         status = "okay";
90         cap-sd-highspeed;
91         cap-mmc-highspeed;
92         broken-cd;
93         bus-width = <4>;
94         drvsel = <3>;
95         smplsel = <0>;
96 };
97
98 &qspi {
99         flash0: flash@0 {
100                 #address-cells = <1>;
101                 #size-cells = <1>;
102                 compatible = "n25q00a";
103                 reg = <0>;
104                 spi-max-frequency = <50000000>;
105
106                 m25p,fast-read;
107                 cdns,page-size = <256>;
108                 cdns,block-size = <16>;
109                 cdns,read-delay = <1>;
110                 cdns,tshsl-ns = <50>;
111                 cdns,tsd2d-ns = <50>;
112                 cdns,tchsh-ns = <4>;
113                 cdns,tslch-ns = <4>;
114
115                 partitions {
116                         compatible = "fixed-partitions";
117                         #address-cells = <1>;
118                         #size-cells = <1>;
119
120                         qspi_boot: partition@0 {
121                                 label = "Boot and fpga data";
122                                 reg = <0x0 0x4000000>;
123                         };
124
125                         qspi_rootfs: partition@4000000 {
126                                 label = "Root Filesystem - JFFS2";
127                                 reg = <0x4000000 0x4000000>;
128                         };
129                 };
130         };
131 };
132
133 &uart0 {
134         status = "okay";
135 };
136
137 &usb0 {
138         status = "okay";
139 };