WIP: merge_config

Change-Id: Ie3b238b7e037b03d9855cc711848573ea447b6a0
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>

packaging: Add spec file for VisionFive2

Change-Id: Ie3e558df63b48ce466bcbbfaa97833e6486b79c1
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>

riscv: Add defconfig files for VisionFive and VisionFive2

Change-Id: I838e37ba129db8c112ec40b23342650b7a8e6f20
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>

config: Add platform independent configuration files for Tizen

Add platform independent tizen.config and tizen_rt.config which
provide configuration required by Tizen. These files are meant to be
merged with platform specific defconfig files using merge_config.sh
script.

Change-Id: Iea6e63384c73bfb8fb7e4cd3049040c2f09e489c
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>

riscv: fix riscv64 unrecognized opcode build error

Considering older gcc version, "imafd" has to be changed
to "g", in order for asm to handle "zicsr" and "zifencei"
extensions.

Support for the mentioned extensions has been added
in GCC 11.1, hence this commit may be removed
after GCC update.

The lack of this causes following errors:
Error: unrecognized opcode `csrr a5,0xc01'
Error: unrecognized opcode `csrr a2,0xc01'

Change-Id: I0768a7b1255c828c4fc319f74f2783bc7e1581bf
Signed-off-by: Marek Szulc <m.szulc3@samsung.com>
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>

 [NOT-FOR-UPSTREAM] build and test instructions

riscv: dts: starfive: Add sdio node for StarFive

This adds the sdio controller node for the StarFive JH7110 SoC.
The sdio0 is defined as emmc and sdio1 is defined as sd.

Signed-off-by: William Qiu <william.qiu@starfivetech.com>

sdio: starfive: Add sdio/emmc driver support for StarFive

Add sdio/emmc driver support for StarFive JH7110 SoC.

Signed-off-by: William Qiu <william.qiu@starfivetech.com>

dt-bindings: sdio: Add bindings for Starfive sdio driver

Add documentation to descibe StarFive JH7110 sdio driver
bindings.

Signed-off-by: William Qiu <william.qiu@starfivetech.com>

RISC-V: defconfig: Enable CONFIG_SERIAL_8250_DW

Add CONFIG_SERIAL_8250_DW=y, which is a necessary option for
StarFive JH7110 and JH7100 SoCs to boot with serial ports.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

riscv: dts: starfive: Add StarFive JH7110 VisionFive2 board device tree

Add a minimal device tree for StarFive JH7110 VisionFive2 board.
Support booting and basic clock/reset/pinctrl/uart drivers.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Co-developed-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Co-developed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

riscv: dts: starfive: Add initial StarFive JH7110 device tree

Add initial device tree for the JH7110 RISC-V SoC by StarFive
Technology Ltd.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Co-developed-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Co-developed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

soc: sifive: ccache: Add StarFive JH7110 support

This adds support for the StarFive JH7110 SoC which also
features this SiFive cache controller.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

dt-bindings: sifive,ccache0: Support StarFive JH7110 SoC

This cache controller is also used on the StarFive JH7110 SoC.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

dt-bindings: interrupt-controller: Add StarFive JH7110 plic

Add compatible string for StarFive JH7110 plic.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

dt-bindings: timer: Add StarFive JH7110 clint

Add compatible string for the StarFive JH7110 clint.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

dt-bindings: riscv: Add StarFive JH7110 SoC and VisionFive2 board

Add device tree bindings for the StarFive JH7110 RISC-V SoC [1]
and the VisionFive2 board [2] equipped with it.

[1]: https://doc-en.rvspace.org/Doc_Center/jh7110.html
[2]: https://doc-en.rvspace.org/Doc_Center/visionfive_2.html

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

pinctrl: starfive: Add StarFive JH7110 aon controller driver

Add pinctrl driver for StarFive JH7110 SoC aon pinctrl controller.

Co-developed-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

pinctrl: starfive: Add StarFive JH7110 sys controller driver

Add pinctrl driver for StarFive JH7110 SoC sys pinctrl controller.

Co-developed-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

dt-bindings: pinctrl: Add StarFive JH7110 aon pinctrl

Add pinctrl bindings for StarFive JH7110 SoC aon pinctrl controller.

Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

dt-bindings: pinctrl: Add StarFive JH7110 sys pinctrl

Add pinctrl bindings for StarFive JH7110 SoC sys pinctrl controller.

Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

dt-bindings: pinctrl: Add StarFive JH7110 pinctrl definitions

Add pinctrl definitions for StarFive JH7110 SoC.

Co-developed-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

clk: starfive: jh71x0: Don't register aux devices if JH7110 reset is disabled

The JH7110 clock drivers will not register redundant auxiliary
devices if the JH7110 reset auxiliary driver is disabled.

Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

reset: starfive: Add StarFive JH7110 reset driver

Add auxiliary driver to support StarFive JH7110 system
and always-on resets.

Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

clk: starfive: Add StarFive JH7110 always-on clock driver

Add driver for the StarFive JH7110 always-on clock controller
and register an auxiliary device for always-on reset controller
which is named as "reset-aon".

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Co-developed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

clk: starfive: Add StarFive JH7110 system clock driver

Add driver for the StarFive JH7110 system clock controller and
register an auxiliary device for system reset controller which
is named as "reset-sys".

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Co-developed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator

Add bindings for the always-on clock and reset generator (AONCRG) on the
JH7110 RISC-V SoC by StarFive Ltd.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

dt-bindings: clock: Add StarFive JH7110 system clock and reset generator

Add bindings for the system clock and reset generator (SYSCRG) on the
JH7110 RISC-V SoC by StarFive Ltd.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

dt-bindings: reset: Add StarFive JH7110 system and always-on reset definitions

Add resets for the StarFive JH7110 system (SYS) and always-on (AON)
reset controller.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

dt-bindings: clock: Add StarFive JH7110 system and always-on clock definitions

Add all clock outputs for the StarFive JH7110 system (SYS) and
always-on (AON) clock generator.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

reset: starfive: jh71x0: Use 32bit I/O on 32bit registers

We currently use 64bit I/O on the 32bit registers. This works because
there are an even number of assert and status registers, so they're only
ever accessed in pairs on 64bit boundaries.

There are however other reset controllers for audio and video on the
JH7100 SoC with only one status register that isn't 64bit aligned so
64bit I/O results in an unaligned access exception.

Switch to 32bit I/O in preparation for supporting these resets too.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

reset: starfive: Rename "jh7100" to "jh71x0" for the common code

For the common code will be shared with the StarFive JH7110 SoC.

Co-developed-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

reset: starfive: Factor out common JH71X0 reset code

The StarFive JH7100 SoC has additional reset controllers for audio and
video, but the registers follow the same structure. On the JH7110 the
reset registers don't get their own memory range, but instead follow the
clock control registers. The registers still follow the same structure
though, so let's factor out the common code to handle all these cases.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Co-developed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

reset: Create subdirectory for StarFive drivers

This moves the StarFive JH7100 reset driver to a new subdirectory in
preparation for adding more StarFive reset drivers.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

clk: starfive: Rename "jh7100" to "jh71x0" for the common code

Rename "clk-starfive-jh7100.h" to "clk-starfive-jh71x0.h" and rename
some variables from "jh7100" or "JH7100" to "jh71x0" or "JH71X0".

Co-developed-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

clk: starfive: Factor out common JH7100 and JH7110 code

The clock control registers on the StarFive JH7100 and JH7110 work
identically, so factor out the code then drivers for the two SoCs
can share it without depending on each other. No functional change.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Co-developed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

Linux 6.1.8

Link: https://lore.kernel.org/r/20230122150246.321043584@linuxfoundation.org
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Fenil Jain <fkjainco@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Link: https://lore.kernel.org/r/20230123094931.568794202@linuxfoundation.org
Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Kelsey Steele <kelseysteele@linux.microsoft.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: qcom: apr: Make qcom,protection-domain optional again

commit 599d41fb8ea8bd2a99ca9525dd69405020e43dda upstream.

APR should not fail if the service device tree node does not have
the qcom,protection-domain property, since this functionality does
not exist on older platforms such as MSM8916 and MSM8996.

Ignore -EINVAL (returned when the property does not exist) to fix
a regression on 6.2-rc1 that prevents audio from working:

  qcom,apr remoteproc0:smd-edge.apr_audio_svc.-1.-1:
    Failed to read second value of qcom,protection-domain
  qcom,apr remoteproc0:smd-edge.apr_audio_svc.-1.-1:
    Failed to add apr 3 svc

Fixes: 6d7860f5750d ("soc: qcom: apr: Add check for idr_alloc and of_property_read_string_index")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221229151648.19839-3-stephan@gerhold.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "wifi: mac80211: fix memory leak in ieee80211_if_add()"

commit 80f8a66dede0a4b4e9e846765a97809c6fe49ce5 upstream.

This reverts commit 13e5afd3d773c6fc6ca2b89027befaaaa1ea7293.

ieee80211_if_free() is already called from free_netdev(ndev)
because ndev->priv_destructor == ieee80211_if_free

syzbot reported:

general protection fault, probably for non-canonical address 0xdffffc0000000004: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027]
CPU: 0 PID: 10041 Comm: syz-executor.0 Not tainted 6.2.0-rc2-syzkaller-00388-g55b98837e37d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
RIP: 0010:pcpu_get_page_chunk mm/percpu.c:262 [inline]
RIP: 0010:pcpu_chunk_addr_search mm/percpu.c:1619 [inline]
RIP: 0010:free_percpu mm/percpu.c:2271 [inline]
RIP: 0010:free_percpu+0x186/0x10f0 mm/percpu.c:2254
Code: 80 3c 02 00 0f 85 f5 0e 00 00 48 8b 3b 48 01 ef e8 cf b3 0b 00 48 ba 00 00 00 00 00 fc ff df 48 8d 78 20 48 89 f9 48 c1 e9 03 <80> 3c 11 00 0f 85 3b 0e 00 00 48 8b 58 20 48 b8 00 00 00 00 00 fc
RSP: 0018:ffffc90004ba7068 EFLAGS: 00010002
RAX: 0000000000000000 RBX: ffff88823ffe2b80 RCX: 0000000000000004
RDX: dffffc0000000000 RSI: ffffffff81c1f4e7 RDI: 0000000000000020
RBP: ffffe8fffe8fc220 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: 1ffffffff2179ab2 R12: ffff8880b983d000
R13: 0000000000000003 R14: 0000607f450fc220 R15: ffff88823ffe2988
FS: 00007fcb349de700(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32220000 CR3: 000000004914f000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
netdev_run_todo+0x6bf/0x1100 net/core/dev.c:10352
ieee80211_register_hw+0x2663/0x4040 net/mac80211/main.c:1411
mac80211_hwsim_new_radio+0x2537/0x4d80 drivers/net/wireless/mac80211_hwsim.c:4583
hwsim_new_radio_nl+0xa09/0x10f0 drivers/net/wireless/mac80211_hwsim.c:5176
genl_family_rcv_msg_doit.isra.0+0x1e6/0x2d0 net/netlink/genetlink.c:968
genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline]
genl_rcv_msg+0x4ff/0x7e0 net/netlink/genetlink.c:1065
netlink_rcv_skb+0x165/0x440 net/netlink/af_netlink.c:2564
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1076
netlink_unicast_kernel net/netlink/af_netlink.c:1330 [inline]
netlink_unicast+0x547/0x7f0 net/netlink/af_netlink.c:1356
netlink_sendmsg+0x91b/0xe10 net/netlink/af_netlink.c:1932
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xd3/0x120 net/socket.c:734
____sys_sendmsg+0x712/0x8c0 net/socket.c:2476
___sys_sendmsg+0x110/0x1b0 net/socket.c:2530
__sys_sendmsg+0xf7/0x1c0 net/socket.c:2559
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 13e5afd3d773 ("wifi: mac80211: fix memory leak in ieee80211_if_add()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Zhengchao Shao <shaozhengchao@huawei.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230113124326.3533978-1-edumazet@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: mq-deadline: Rename deadline_is_seq_writes()

commit 3692fec8bb476e8583e559ff5783a6adef306cf2 upstream.

Rename deadline_is_seq_writes() to deadline_is_seq_write() (remove the
"s" plural) to more correctly reflect the fact that this function tests
a single request, not multiple requests.

Fixes: 015d02f48537 ("block: mq-deadline: Do not break sequential write streams to zoned HDDs")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20221126025550.967914-2-damien.lemoal@opensource.wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: fix missing mutex_unlock in mlx5_fw_fatal_reporter_err_work()

commit 90e7cb78b81543998217b0eb446c067ce2191a79 upstream.

Add missing mutex_unlock() before returning from
mlx5_fw_fatal_reporter_err_work().

Fixes: 9078e843efec ("net/mlx5: Avoid recovery in probe flows")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

octeontx2-pf: Fix the use of GFP_KERNEL in atomic context on rt

commit 55ba18dc62deff5910c0fa64486dea1ff20832ff upstream.

The commit 4af1b64f80fb ("octeontx2-pf: Fix lmtst ID used in aura
free") uses the get/put_cpu() to protect the usage of percpu pointer
in ->aura_freeptr() callback, but it also unnecessarily disable the
preemption for the blockable memory allocation. The commit 87b93b678e95
("octeontx2-pf: Avoid use of GFP_KERNEL in atomic context") tried to
fix these sleep inside atomic warnings. But it only fix the one for
the non-rt kernel. For the rt kernel, we still get the similar warnings
like below.
  BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
  in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0
  preempt_count: 1, expected: 0
  RCU nest depth: 0, expected: 0
  3 locks held by swapper/0/1:
   #0: ffff800009fc5fe8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x24/0x30
   #1: ffff000100c276c0 (&mbox->lock){+.+.}-{3:3}, at: otx2_init_hw_resources+0x8c/0x3a4
   #2: ffffffbfef6537e0 (&cpu_rcache->lock){+.+.}-{2:2}, at: alloc_iova_fast+0x1ac/0x2ac
  Preemption disabled at:
  [<ffff800008b1908c>] otx2_rq_aura_pool_init+0x14c/0x284
  CPU: 20 PID: 1 Comm: swapper/0 Tainted: G        W          6.2.0-rc3-rt1-yocto-preempt-rt #1
  Hardware name: Marvell OcteonTX CN96XX board (DT)
  Call trace:
   dump_backtrace.part.0+0xe8/0xf4
   show_stack+0x20/0x30
   dump_stack_lvl+0x9c/0xd8
   dump_stack+0x18/0x34
   __might_resched+0x188/0x224
   rt_spin_lock+0x64/0x110
   alloc_iova_fast+0x1ac/0x2ac
   iommu_dma_alloc_iova+0xd4/0x110
   __iommu_dma_map+0x80/0x144
   iommu_dma_map_page+0xe8/0x260
   dma_map_page_attrs+0xb4/0xc0
   __otx2_alloc_rbuf+0x90/0x150
   otx2_rq_aura_pool_init+0x1c8/0x284
   otx2_init_hw_resources+0xe4/0x3a4
   otx2_open+0xf0/0x610
   __dev_open+0x104/0x224
   __dev_change_flags+0x1e4/0x274
   dev_change_flags+0x2c/0x7c
   ic_open_devs+0x124/0x2f8
   ip_auto_config+0x180/0x42c
   do_one_initcall+0x90/0x4dc
   do_basic_setup+0x10c/0x14c
   kernel_init_freeable+0x10c/0x13c
   kernel_init+0x2c/0x140
   ret_from_fork+0x10/0x20

Of course, we can shuffle the get/put_cpu() to only wrap the invocation
of ->aura_freeptr() as what commit 87b93b678e95 does. But there are only
two ->aura_freeptr() callbacks, otx2_aura_freeptr() and
cn10k_aura_freeptr(). There is no usage of perpcu variable in the
otx2_aura_freeptr() at all, so the get/put_cpu() seems redundant to it.
We can move the get/put_cpu() into the corresponding callback which
really has the percpu variable usage and avoid the sprinkling of
get/put_cpu() in several places.

Fixes: 4af1b64f80fb ("octeontx2-pf: Fix lmtst ID used in aura free")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://lore.kernel.org/r/20230118071300.3271125-1-haokexin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/ulp: use consistent error code when blocking ULP

commit 8ccc99362b60c6f27bb46f36fdaaccf4ef0303de upstream.

The referenced commit changed the error code returned by the kernel
when preventing a non-established socket from attaching the ktls
ULP. Before to such a commit, the user-space got ENOTCONN instead
of EINVAL.

The existing self-tests depend on such error code, and the change
caused a failure:

  RUN           global.non_established ...
 tls.c:1673:non_established:Expected errno (22) == ENOTCONN (107)
 non_established: Test failed at step #3
          FAIL  global.non_established

In the unlikely event existing applications do the same, address
the issue by restoring the prior error code in the above scenario.

Note that the only other ULP performing similar checks at init
time - smc_ulp_ops - also fails with ENOTCONN when trying to attach
the ULP to a non-established socket.

Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Fixes: 2c02d41d71f9 ("net/ulp: prevent ULP without clone op from entering the LISTEN status")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/7bb199e7a93317fb6f8bf8b9b2dc71c18f337cde.1674042685.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

octeontx2-pf: Avoid use of GFP_KERNEL in atomic context

commit 87b93b678e95c7d93fe6a55b0e0fbda26d8c7760 upstream.

Using GFP_KERNEL in preemption disable context, causing below warning
when CONFIG_DEBUG_ATOMIC_SLEEP is enabled.

[   32.542271] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:274
[   32.550883] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0
[   32.558707] preempt_count: 1, expected: 0
[   32.562710] RCU nest depth: 0, expected: 0
[   32.566800] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G        W          6.2.0-rc2-00269-gae9dcb91c606 #7
[   32.576188] Hardware name: Marvell CN106XX board (DT)
[   32.581232] Call trace:
[   32.583670]  dump_backtrace.part.0+0xe0/0xf0
[   32.587937]  show_stack+0x18/0x30
[   32.591245]  dump_stack_lvl+0x68/0x84
[   32.594900]  dump_stack+0x18/0x34
[   32.598206]  __might_resched+0x12c/0x160
[   32.602122]  __might_sleep+0x48/0xa0
[   32.605689]  __kmem_cache_alloc_node+0x2b8/0x2e0
[   32.610301]  __kmalloc+0x58/0x190
[   32.613610]  otx2_sq_aura_pool_init+0x1a8/0x314
[   32.618134]  otx2_open+0x1d4/0x9d0

To avoid use of GFP_ATOMIC for memory allocation, disable preemption
after all memory allocation is done.

Fixes: 4af1b64f80fb ("octeontx2-pf: Fix lmtst ID used in aura free")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: correct MEC number for gfx11 APUs

commit 0ddadc3a2208aedb1b27dbb76d0b4e722b5b527a upstream.

There is only one MEC on these APUs.

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: add tmz support for GC IP v11.0.4

commit 2aecbe492a3c0bf4c21f78c099a6f6c205fab0c7 upstream.

Add tmz support for GC 11.0.4.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: add tmz support for GC 11.0.1

commit 97074216917b4188f0af3e52cc5b3f2b277bbbca upstream.

this patch to add tmz support for GC 11.0.1.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: enable GFX Clock Gating control for GC IP v11.0.4

commit f9caa237372b106b5e70ba1a4bfd4222eb79ec71 upstream.

Enable GFX IP v11.0.4 CG gate/ungate control.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: enable GFX Power Gating for GC IP v11.0.4

commit a89e2965da6e644729a8ee9c318b7fa9a2990353 upstream.

Enable GFX Power Gating control for GC IP v11.0.4.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: enable GFX IP v11.0.4 CG support

commit f2b91e5a7cc0368709964994ca253781b51a486a upstream.

Add CG support for GFX/MC/HDP/ATHUB/IH/BIF.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: enable PSP IP v13.0.11 support

commit 2c83e3fd928b9cb1e35340e58d4b1bd2eea23ed6 upstream.

Enable PSP FW loading for PSP IP v13.0.11

Signed-off-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/discovery: enable nbio support for NBIO v7.7.1

commit 7308ceb44663f40bf9e7373c3b1aa4f7f433d625 upstream.

this patch is to enable nbio support for NBIO v7.7.1.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/pm: use the specific mailbox registers only for SMU IP v13.0.4

commit 069a5af97ce3a1448a3566ce8b63b60e51e19958 upstream.

The SMU IP v13.0.4 ppt interface is shared by IP v13.0.11, they use
the different mailbox register offset. So use the specific mailbox
registers offset for v13.0.4.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/soc21: add mode2 asic reset for SMU IP v13.0.11

commit 18ad18853cf2d8b94cef0112ba94f7a7535a9e89 upstream.

Set the default reset method to mode2 for SMU IP v13.0.11

Signed-off-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/pm: add GFXOFF control IP version check for SMU IP v13.0.11

commit 9f83e61201bb21957e4993736532edad7a11c7fa upstream.

Enable the SMU IP v13.0.11 GFXOFF control

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: add smu 13 support for smu 13.0.11

commit 51e7a2168769c2f46edd93a18d4cba4a6d4adb13 upstream.

this patch to add smu 13 support for smu 13.0.11.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/pm: enable swsmu for SMU IP v13.0.11

commit 16412a94364d1dcebded9217ecb693c9659eaabc upstream.

Add the entry to set the ppt functions for SMU IP v13.0.11.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/discovery: add PSP IP v13.0.11 support

commit 7c1389f1b1228b96e621815e63eaa2e89b9f7511 upstream.

Add PSP IP v13.0.11 ip discovery support.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: add gmc v11 support for GC 11.0.4

commit d0ca8248999e4c5b02ac64f40536ff46dc14dda7 upstream.

Add gmc v11 support for GC 11.0.4.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: add gfx support for GC 11.0.4

commit 1763cb65e870e783e26d2dc9def4edbeadcb1050 upstream.

this patch to add GC 11.0.4 gfx support to gfx11 implementation.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/discovery: set the APU flag for GC 11.0.4

commit dd2d9c7fd7716838d477e257f43facd68c53d3a9 upstream.

Set the APU flag appropriately for GC 11.0.4.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: set GC 11.0.4 family

commit 94ab70685844227b5c9cb9027a5c4acd3b0e4564 upstream.

this patch is to set GC 11.0.4 family.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/discovery: enable mes support for GC v11.0.4

commit 6a6af77570add4e58721386be429dbd02cd4b9dd upstream.

this patch is to enable mes for GC 11.0.4.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/discovery: enable gfx v11 for GC 11.0.4

commit b952d6b3d3ff3c1570fab77f2137d5e5280a0e57 upstream.

Enable gfx v11 for GC 11.0.4.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/discovery: enable gmc v11 for GC 11.0.4

commit d5fd8c89ed206b2df3933bc4ea129401b2b60869 upstream.

Enable gmc (graphic memory controller) v11 for GC 11.0.4.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/discovery: enable soc21 common for GC 11.0.4

commit 69dc98bbd44160930b6b3ca9ca558f89435d2702 upstream.

Enable soc21 common for GC 11.0.4.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/fpu: Use _Alignof to avoid undefined behavior in TYPE_ALIGN

commit 55228db2697c09abddcb9487c3d9fa5854a932cd upstream.

WG14 N2350 specifies that it is an undefined behavior to have type
definitions within offsetof", see

  https://www.open-std.org/jtc1/sc22/wg14/www/docs/n2350.htm

This specification is also part of C23.

Therefore, replace the TYPE_ALIGN macro with the _Alignof builtin to
avoid undefined behavior. (_Alignof itself is C11 and the kernel is
built with -gnu11).

ISO C11 _Alignof is subtly different from the GNU C extension
__alignof__. Latter is the preferred alignment and _Alignof the
minimal alignment. For long long on x86 these are 8 and 4
respectively.

The macro TYPE_ALIGN's behavior matches _Alignof rather than
__alignof__.

  [ bp: Massage commit message. ]

Signed-off-by: YingChi Long <me@inclyc.cn>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20220925153151.2467884-1-me@inclyc.cn
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exit: Use READ_ONCE() for all oops/warn limit reads

commit 7535b832c6399b5ebfc5b53af5c51dd915ee2538 upstream.

Use a temporary variable to take full advantage of READ_ONCE() behavior.
Without this, the report (and even the test) might be out of sync with
the initial test.

Reported-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/Y5x7GXeluFmZ8E0E@hirez.programming.kicks-ass.net
Fixes: 9fc9e278a5c0 ("panic: Introduce warn_limit")
Fixes: d4ccd54d28d3 ("exit: Put an upper limit on how often we can oops")
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Jann Horn <jannh@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: tangmeng <tangmeng@uniontech.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

docs: Fix path paste-o for /sys/kernel/warn_count

commit 00dd027f721e0458418f7750d8a5a664ed3e5994 upstream.

Running "make htmldocs" shows that "/sys/kernel/oops_count" was
duplicated. This should have been "warn_count":

  Warning: /sys/kernel/oops_count is defined 2 times:
  ./Documentation/ABI/testing/sysfs-kernel-warn_count:0
  ./Documentation/ABI/testing/sysfs-kernel-oops_count:0

Fix the typo.

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/linux-doc/202212110529.A3Qav8aR-lkp@intel.com
Fixes: 8b05aa263361 ("panic: Expose "warn_count" to sysfs")
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

panic: Expose "warn_count" to sysfs

commit 8b05aa26336113c4cea25f1c333ee8cd4fc212a6 upstream.

Since Warn count is now tracked and is a fairly interesting signal, add
the entry /sys/kernel/warn_count to expose it to userspace.

Cc: Petr Mladek <pmladek@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: tangmeng <tangmeng@uniontech.com>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221117234328.594699-6-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

panic: Introduce warn_limit

commit 9fc9e278a5c0b708eeffaf47d6eb0c82aa74ed78 upstream.

Like oops_limit, add warn_limit for limiting the number of warnings when
panic_on_warn is not set.

Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: tangmeng <tangmeng@uniontech.com>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: linux-doc@vger.kernel.org
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221117234328.594699-5-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

panic: Consolidate open-coded panic_on_warn checks

commit 79cc1ba7badf9e7a12af99695a557e9ce27ee967 upstream.

Several run-time checkers (KASAN, UBSAN, KFENCE, KCSAN, sched) roll
their own warnings, and each check "panic_on_warn". Consolidate this
into a single function so that future instrumentation can be added in
a single location.

Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Gow <davidgow@google.com>
Cc: tangmeng <tangmeng@uniontech.com>
Cc: Jann Horn <jannh@google.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: kasan-dev@googlegroups.com
Cc: linux-mm@kvack.org
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20221117234328.594699-4-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exit: Allow oops_limit to be disabled

commit de92f65719cd672f4b48397540b9f9eff67eca40 upstream.

In preparation for keeping oops_limit logic in sync with warn_limit,
have oops_limit == 0 disable checking the Oops counter.

Cc: Jann Horn <jannh@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exit: Expose "oops_count" to sysfs

commit 9db89b41117024f80b38b15954017fb293133364 upstream.

Since Oops count is now tracked and is a fairly interesting signal, add
the entry /sys/kernel/oops_count to expose it to userspace.

Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Jann Horn <jannh@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221117234328.594699-3-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exit: Put an upper limit on how often we can oops

commit d4ccd54d28d3c8598e2354acc13e28c060961dbb upstream.

Many Linux systems are configured to not panic on oops; but allowing an
attacker to oops the system **really** often can make even bugs that look
completely unexploitable exploitable (like NULL dereferences and such) if
each crash elevates a refcount by one or a lock is taken in read mode, and
this causes a counter to eventually overflow.

The most interesting counters for this are 32 bits wide (like open-coded
refcounts that don't use refcount_t). (The ldsem reader count on 32-bit
platforms is just 16 bits, but probably nobody cares about 32-bit platforms
that much nowadays.)

So let's panic the system if the kernel is constantly oopsing.

The speed of oopsing 2^32 times probably depends on several factors, like
how long the stack trace is and which unwinder you're using; an empirically
important one is whether your console is showing a graphical environment or
a text console that oopses will be printed to.
In a quick single-threaded benchmark, it looks like oopsing in a vfork()
child with a very short stack trace only takes ~510 microseconds per run
when a graphical console is active; but switching to a text console that
oopses are printed to slows it down around 87x, to ~45 milliseconds per
run.
(Adding more threads makes this faster, but the actual oops printing
happens under &die_lock on x86, so you can maybe speed this up by a factor
of around 2 and then any further improvement gets eaten up by lock
contention.)

It looks like it would take around 8-12 days to overflow a 32-bit counter
with repeated oopsing on a multi-core X86 system running a graphical
environment; both me (in an X86 VM) and Seth (with a distro kernel on
normal hardware in a standard configuration) got numbers in that ballpark.

12 days aren't *that* short on a desktop system, and you'd likely need much
longer on a typical server system (assuming that people don't run graphical
desktop environments on their servers), and this is a *very* noisy and
violent approach to exploiting the kernel; and it also seems to take orders
of magnitude longer on some machines, probably because stuff like EFI
pstore will slow it down a ton if that's active.

Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20221107201317.324457-1-jannh@google.com
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221117234328.594699-2-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

panic: Separate sysctl logic from CONFIG_SMP

commit 9360d035a579d95d1e76c471061b9065b18a0eb1 upstream.

In preparation for adding more sysctls directly in kernel/panic.c, split
CONFIG_SMP from the logic that adds sysctls.

Cc: Petr Mladek <pmladek@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: tangmeng <tangmeng@uniontech.com>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221117234328.594699-1-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi: rt-wrapper: Add missing include

commit 18bba1843fc7f264f58c9345d00827d082f9c558 upstream.

Add the missing #include of asm/assembler.h, which is where the ldr_l
macro is defined.

Fixes: ff7a167961d1b97e ("arm64: efi: Execute runtime services from a dedicated stack")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: efi: Execute runtime services from a dedicated stack

commit ff7a167961d1b97e0e205f245f806e564d3505e7 upstream.

With the introduction of PRMT in the ACPI subsystem, the EFI rts
workqueue is no longer the only caller of efi_call_virt_pointer() in the
kernel. This means the EFI runtime services lock is no longer sufficient
to manage concurrent calls into firmware, but also that firmware calls
may occur that are not marshalled via the workqueue mechanism, but
originate directly from the caller context.

For added robustness, and to ensure that the runtime services have 8 KiB
of stack space available as per the EFI spec, introduce a spinlock
protected EFI runtime stack of 8 KiB, where the spinlock also ensures
serialization between the EFI rts workqueue (which itself serializes EFI
runtime calls) and other callers of efi_call_virt_pointer().

While at it, use the stack pivot to avoid reloading the shadow call
stack pointer from the ordinary stack, as doing so could produce a
gadget to defeat it.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/ntfs3: Fix attr_punch_hole() null pointer derenference

commit 6d5c9e79b726cc473d40e9cb60976dbe8e669624 upstream.

The bug occours due to a misuse of `attr` variable instead of `attr_b`.
`attr` is being initialized as NULL, then being derenfernced
as `attr->res.data_size`.

This bug causes a crash of the ntfs3 driver itself,
If compiled directly to the kernel, it crashes the whole system.

Signed-off-by: Alon Zahavi <zahavi.alon@gmail.com>
Co-developed-by: Tal Lossos <tallossos@gmail.com>
Signed-off-by: Tal Lossos <tallossos@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: reduce roundtrips on create/qinfo requests

commit c877ce47e1378dbafa6f1bf84c0c83a05ca8972a upstream.

To work around some Window servers that return
STATUS_OBJECT_NAME_INVALID on query infos under DFS namespaces that
contain non-ASCII characters, we started checking for -ENOENT on every
file open, and if so, then send additional requests to figure out
whether it is a DFS link or not.  It means that all those requests
will be sent to every non-existing file.

So, in order to reduce the number of roundtrips, check earlier whether
status code is STATUS_OBJECT_NAME_INVALID and tcon supports dfs, and
if so, then map -ENOENT to -EREMOTE so mount or automount will take
care of chasing the DFS link -- if it isn't an DFS link, then -ENOENT
will be returned appropriately.

Before patch

  SMB2 438 Create Request File: ada.test\dfs\foo;GetInfo Request...
  SMB2 310 Create Response, Error: STATUS_OBJECT_NAME_NOT_FOUND;...
  SMB2 228 Ioctl Request FSCTL_DFS_GET_REFERRALS, File: \ada.test\dfs\foo
  SMB2 143 Ioctl Response, Error: STATUS_OBJECT_PATH_NOT_FOUND
  SMB2 438 Create Request File: ada.test\dfs\foo;GetInfo Request...
  SMB2 310 Create Response, Error: STATUS_OBJECT_NAME_NOT_FOUND;...
  SMB2 228 Ioctl Request FSCTL_DFS_GET_REFERRALS, File: \ada.test\dfs\foo
  SMB2 143 Ioctl Response, Error: STATUS_OBJECT_PATH_NOT_FOUND

After patch

  SMB2 438 Create Request File: ada.test\dfs\foo;GetInfo Request...
  SMB2 310 Create Response, Error: STATUS_OBJECT_NAME_NOT_FOUND;...
  SMB2 438 Create Request File: ada.test\dfs\foo;GetInfo Request...
  SMB2 310 Create Response, Error: STATUS_OBJECT_NAME_NOT_FOUND;...

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: disable S/G display on DCN 3.1.4

commit a52287d66dfa1cca32e6273623b63ba39d87f126 upstream.

Causes flickering or white screens in some configurations.
Disable it for now until we can fix the issue.

Cc: roman.li@amd.com
Cc: yifan1.zhang@amd.com
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: disable S/G display on DCN 3.1.5

commit e78cc6a4c7486f50c2786d91dd7d9649a87d1dcb upstream.

Causes flickering or white screens in some configurations.
Disable it for now until we can fix the issue.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2354
Cc: roman.li@amd.com
Cc: yifan1.zhang@amd.com
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Fix COLOR_SPACE_YCBCR2020_TYPE matrix

commit 973a9c810c785ac270a6d50d8cf862b0c1643a10 upstream.

The YCC conversion matrix for RGB -> COLOR_SPACE_YCBCR2020_TYPE is
missing the values for the fourth column of the matrix.

The fourth column of the matrix is essentially just a value that is
added given that the color is 3 components in size.
These values are needed to bias the chroma from the [-1, 1] -> [0, 1]
range.

This fixes color being very green when using Gamescope HDR on HDMI
output which prefers YCC 4:4:4.

Fixes: 40df2f809e8f ("drm/amd/display: color space ycbcr709 support")
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Calculate output_color_space after pixel encoding adjustment

commit 79601b894849cb6f6d6122e6590f1887ac4a66b3 upstream.

Code in get_output_color_space depends on knowing the pixel encoding to
determine whether to pick between eg. COLOR_SPACE_SRGB or
COLOR_SPACE_YCBCR709 for transparent RGB -> YCbCr 4:4:4 in the driver.

v2: Fixed patch being accidentally based on a personal feature branch, oops!

Fixes: ea117312ea9f ("drm/amd/display: Reduce HDMI pixel encoding if max clock is exceeded")
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Fix set scaling doesn's work

commit 040625ab82ce6dca7772cb3867fe5c9eb279a344 upstream.

[Why]
Setting scaling does not correctly update CRTC state. As a result
dc stream state's src (composition area) && dest (addressable area)
was not calculated as expected. This causes set scaling doesn's work.

[How]
Correctly update CRTC state when setting scaling property.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: hongao <hongao@uniontech.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Remove unused variable

commit 2293a73ad4f3b6c37c06713ff1b67659d92ef43d upstream.

Removed unused i915 var.

Fixes: a273e95721e9 ("drm/i915: Allow switching away via vga-switcheroo if uninitialized")
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118170624.9326-1-nirmoy.das@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Allow switching away via vga-switcheroo if uninitialized

commit a273e95721e96885971a05f1b34cb6d093904d9d upstream.

Always allow switching away via vga-switcheroo if the display is
uninitalized. Instead prevent switching to i915 if the device has
not been initialized.

This issue was introduced by commit 5df7bd130818 ("drm/i915: skip
display initialization when there is no display") protected, which
protects code paths from being executed on uninitialized devices.
In the case of vga-switcheroo, we want to allow a switch away from
i915's device. So run vga_switcheroo_process_delayed_switch() and
test in the switcheroo callbacks if the i915 device is available.

Fixes: 5df7bd130818 ("drm/i915: skip display initialization when there is no display")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: "Jouni Högander" <jouni.hogander@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: "José Roberto de Souza" <jose.souza@intel.com>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.14+
Link: https://patchwork.freedesktop.org/patch/msgid/20230116115425.13484-2-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/display: Check source height is > 0

commit 8565c502e7c156d190d8e6d36e443f51b257f165 upstream.

The error message suggests that the height of the src rect must be at
least 1. Reject source with height of 0.

Cc: stable@vger.kernel.org
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221226225246.1.I15dff7bb5a0e485c862eae61a69096caf12ef29f@changeid
(cherry picked from commit 0fe76b198d482b41771a8d17b45fb726d13083cf)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: re-disable RC6p on Sandy Bridge

commit 67b0b4ed259e425b7eed09da75b42c80682ca003 upstream.

RC6p on Sandy Bridge got re-enabled over time, causing visual glitches
and GPU hangs.

Disabled originally in commit 1c8ecf80fdee ("drm/i915: do not enable
RC6p on Sandy Bridge").

Signed-off-by: Sasa Dragic <sasa.dragic@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219172927.9603-2-sasa.dragic@gmail.com
Fixes: fb6db0f5bf1d ("drm/i915: Remove unsafe i915.enable_rc6")
Fixes: 13c5a577b342 ("drm/i915/gt: Select the deepest available parking mode for rc6")
Cc: stable@vger.kernel.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 0c8a6e9ea232c221976a0670256bd861408d9917)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Correct the power calcultion for Renior/Cezanne.

commit c7bae4aaa5609c1fa9761c35dbcc5fcc92915222 upstream.

From smu firmware,the value of power is transferred  in units of watts.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2321
Fixes: 137aac26a2ed ("drm/amdgpu/smu12: fix power reporting on renoir")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: allow multipipe policy on ASICs with one MEC

commit dc88063b87775971be564d79dc1b05f7b8b5c135 upstream.

Always enable multipipe policy on ASICs with GC VERSION > 9.0.0
instead of MEC number > 1.

This will allow multipipe policy on ASICs with one MEC,
e.g., gfx11 APUs.

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: fix amdgpu_job_free_resources v2

commit 74ea8e78ab349514c9f4df0be1189d91267d750d upstream.

It can be that neither fence were initialized when we run out of UVD
streams for example.

v2: fix typo breaking compile

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2324
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: omap1: fix !ARCH_OMAP1_ANY link failures

commit 980a637d11fe8dfc734f508a422185c2de55e669 upstream.

While compile-testing randconfig builds for the upcoming boardfile
removal, I noticed that an earlier patch of mine was completely
broken, and the introduction of CONFIG_ARCH_OMAP1_ANY only replaced
one set of build failures with another one, now resulting in
link failures like

ld: drivers/video/fbdev/omap/omapfb_main.o: in function `omapfb_do_probe':
drivers/video/fbdev/omap/omapfb_main.c:1703: undefined reference to `omap_set_dma_priority'
ld: drivers/dma/ti/omap-dma.o: in function `omap_dma_free_chan_resources':
drivers/dma/ti/omap-dma.c:777: undefined reference to `omap_free_dma'
drivers/dma/ti/omap-dma.c:1685: undefined reference to `omap_get_plat_info'
ld: drivers/usb/gadget/udc/omap_udc.o: in function `next_in_dma':
drivers/usb/gadget/udc/omap_udc.c:820: undefined reference to `omap_get_dma_active_status'

I tried reworking it, but the resulting patch ended up much bigger than
simply avoiding the original problem of unused-function warnings like

arch/arm/mach-omap1/mcbsp.c:76:30: error: unused variable 'omap1_mcbsp_ops' [-Werror,-Wunused-variable]

As a result, revert the previous fix, and rearrange the code that
produces warnings to hide them. For mcbsp, the #ifdef check can
simply be removed as the cpu_is_omapxxx() checks already achieve
the same result, while in the io.c the easiest solution appears to
be to merge the common map bits into each soc specific portion.
This gets cleaned in a nicer way after omap7xx support gets dropped,
as the remaining SoCs all have the exact same I/O map.

Fixes: 615dce5bf736 ("ARM: omap1: fix build with no SoC selected")
Cc: stable@vger.kernel.org
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: qcom: apq8084-ifc6540: fix overriding SDHCI

commit 0154252a3b87f77db1e44516d1ed2e82e2d29c30 upstream.

While changing node names of APQ8084 SDHCI, the ones in IFC6540 board
were not updated leading to disabled and misconfigured SDHCI.

Cc: <stable@vger.kernel.org>
Fixes: 2477d81901a2 ("ARM: dts: qcom: Fix sdhci node names - use 'mmc@'")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204084614.12193-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

VMCI: Use threaded irqs instead of tasklets

commit 3daed6345d5880464f46adab871d208e1baa2f3a upstream.

The vmci_dispatch_dgs() tasklet function calls vmci_read_data()
which uses wait_event() resulting in invalid sleep in an atomic
context (and therefore potentially in a deadlock).

Use threaded irqs to fix this issue and completely remove usage
of tasklets.

[   20.264639] BUG: sleeping function called from invalid context at drivers/misc/vmw_vmci/vmci_guest.c:145
[   20.264643] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 762, name: vmtoolsd
[   20.264645] preempt_count: 101, expected: 0
[   20.264646] RCU nest depth: 0, expected: 0
[   20.264647] 1 lock held by vmtoolsd/762:
[   20.264648]  #0: ffff0000874ae440 (sk_lock-AF_VSOCK){+.+.}-{0:0}, at: vsock_connect+0x60/0x330 [vsock]
[   20.264658] Preemption disabled at:
[   20.264659] [<ffff80000151d7d8>] vmci_send_datagram+0x44/0xa0 [vmw_vmci]
[   20.264665] CPU: 0 PID: 762 Comm: vmtoolsd Not tainted 5.19.0-0.rc8.20220727git39c3c396f813.60.fc37.aarch64 #1
[   20.264667] Hardware name: VMware, Inc. VBSA/VBSA, BIOS VEFI 12/31/2020
[   20.264668] Call trace:
[   20.264669]  dump_backtrace+0xc4/0x130
[   20.264672]  show_stack+0x24/0x80
[   20.264673]  dump_stack_lvl+0x88/0xb4
[   20.264676]  dump_stack+0x18/0x34
[   20.264677]  __might_resched+0x1a0/0x280
[   20.264679]  __might_sleep+0x58/0x90
[   20.264681]  vmci_read_data+0x74/0x120 [vmw_vmci]
[   20.264683]  vmci_dispatch_dgs+0x64/0x204 [vmw_vmci]
[   20.264686]  tasklet_action_common.constprop.0+0x13c/0x150
[   20.264688]  tasklet_action+0x40/0x50
[   20.264689]  __do_softirq+0x23c/0x6b4
[   20.264690]  __irq_exit_rcu+0x104/0x214
[   20.264691]  irq_exit_rcu+0x1c/0x50
[   20.264693]  el1_interrupt+0x38/0x6c
[   20.264695]  el1h_64_irq_handler+0x18/0x24
[   20.264696]  el1h_64_irq+0x68/0x6c
[   20.264697]  preempt_count_sub+0xa4/0xe0
[   20.264698]  _raw_spin_unlock_irqrestore+0x64/0xb0
[   20.264701]  vmci_send_datagram+0x7c/0xa0 [vmw_vmci]
[   20.264703]  vmci_datagram_dispatch+0x84/0x100 [vmw_vmci]
[   20.264706]  vmci_datagram_send+0x2c/0x40 [vmw_vmci]
[   20.264709]  vmci_transport_send_control_pkt+0xb8/0x120 [vmw_vsock_vmci_transport]
[   20.264711]  vmci_transport_connect+0x40/0x7c [vmw_vsock_vmci_transport]
[   20.264713]  vsock_connect+0x278/0x330 [vsock]
[   20.264715]  __sys_connect_file+0x8c/0xc0
[   20.264718]  __sys_connect+0x84/0xb4
[   20.264720]  __arm64_sys_connect+0x2c/0x3c
[   20.264721]  invoke_syscall+0x78/0x100
[   20.264723]  el0_svc_common.constprop.0+0x68/0x124
[   20.264724]  do_el0_svc+0x38/0x4c
[   20.264725]  el0_svc+0x60/0x180
[   20.264726]  el0t_64_sync_handler+0x11c/0x150
[   20.264728]  el0t_64_sync+0x190/0x194

Signed-off-by: Vishnu Dasa <vdasa@vmware.com>
Suggested-by: Zack Rusin <zackr@vmware.com>
Reported-by: Nadav Amit <namit@vmware.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Fixes: 463713eb6164 ("VMCI: dma dg: add support for DMA datagrams receive")
Cc: <stable@vger.kernel.org> # v5.18+
Cc: VMware PV-Drivers Reviewers <pv-drivers@vmware.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Bryan Tan <bryantan@vmware.com>
Reviewed-by: Bryan Tan <bryantan@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Link: https://lore.kernel.org/r/20221130070511.46558-1-vdasa@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: add meteor lake point M DID

commit 0c4d68261717f89fa8c4f98a6967c3832fcb3ad0 upstream.

Add Meteor Lake Point M device id.

Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20221212220247.286019-2-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: bus: fix unlink on bus in error path

commit a43866856125c3c432e2fbb6cc63cee1539ec4a7 upstream.

Unconditional call to mei_cl_unlink in mei_cl_bus_dev_release leads
to call of the mei_cl_unlink without corresponding mei_cl_link.
This leads to miscalculation of open_handle_count (decrease without
increase).

Call unlink in mei_cldev_enable fail path and remove blanket unlink
from mei_cl_bus_dev_release.

Fixes: 34f1166afd67 ("mei: bus: need to unlink client before freeing")
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20221212220247.286019-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gsmi: fix null-deref in gsmi_get_variable

commit a769b05eeed7accc4019a1ed9799dd72067f1ce8 upstream.

We can get EFI variables without fetching the attribute, so we must
allow for that in gsmi.

commit 859748255b43 ("efi: pstore: Omit efivars caching EFI varstore
access layer") added a new get_variable call with attr=NULL, which
triggers panic in gsmi.

Fixes: 74c5b31c6618 ("driver: Google EFI SMI")
Cc: stable <stable@kernel.org>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Link: https://lore.kernel.org/r/20230118010212.1268474-1-khazhy@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: exar: Add support for Sealevel 7xxxC serial cards

commit 14ee78d5932afeb710c8305196a676a715bfdea8 upstream.

Add support for Sealevel 7xxxC serial cards.

This patch:
* Adds IDs to recognize 7xxxC cards from Sealevel Systems.
* Updates exar_pci_probe() to set nr_ports to last two bytes of primary
  dev ID for these cards.

Signed-off-by: Matthew Howell <matthew.howell@sealevel.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2301191440010.22558@tstest-VirtualBox
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: atmel: fix incorrect baudrate setup

commit 5bfdd3c654bd879bff50c2e85e42f85ae698b42f upstream.

Commit ba47f97a18f2 ("serial: core: remove baud_rates when serial console
setup") changed uart_set_options to select the correct baudrate
configuration based on the absolute error between requested baudrate and
available standard baudrate settings.
Prior to that commit the baudrate was selected based on which predefined
standard baudrate did not exceed the requested baudrate.
This change of selection logic was never reflected in the atmel serial
driver. Thus the comment left in the atmel serial driver is no longer
accurate.
Additionally the manual rounding up described in that comment and applied
via (quot - 1) requests an incorrect baudrate. Since uart_set_options uses
tty_termios_encode_baud_rate to determine the appropriate baudrate flags
this can cause baudrate selection to fail entirely because
tty_termios_encode_baud_rate will only select a baudrate if relative error
between requested and selected baudrate does not exceed +/-2%.
Fix that by requesting actual, exact baudrate used by the serial.

Fixes: ba47f97a18f2 ("serial: core: remove baud_rates when serial console setup")
Cc: stable <stable@kernel.org>
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Link: https://lore.kernel.org/r/20230109072940.202936-1-t.schramm@manjaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>