2 * Copyright (c) 2001-2008, by Cisco Systems, Inc. All rights reserved.
3 * Copyright (c) 2008-2012, by Randall Stewart. All rights reserved.
4 * Copyright (c) 2008-2012, by Michael Tuexen. All rights reserved.
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
9 * a) Redistributions of source code must retain the above copyright notice,
10 * this list of conditions and the following disclaimer.
12 * b) Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in
14 * the documentation and/or other materials provided with the distribution.
16 * c) Neither the name of Cisco Systems, Inc. nor the names of its
17 * contributors may be used to endorse or promote products derived
18 * from this software without specific prior written permission.
20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
22 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
24 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
30 * THE POSSIBILITY OF SUCH DAMAGE.
34 #include <sys/cdefs.h>
35 __FBSDID("$FreeBSD: head/sys/netinet/sctp_constants.h 271204 2014-09-06 19:12:14Z tuexen $");
38 #ifndef _NETINET_SCTP_CONSTANTS_H_
39 #define _NETINET_SCTP_CONSTANTS_H_
41 #if defined(__Userspace_os_Windows)
42 extern void getwintimeofday(struct timeval *tv);
45 /* IANA assigned port number for SCTP over UDP encapsulation */
46 #define SCTP_OVER_UDP_TUNNELING_PORT 9899
48 /* Number of packets to get before sack sent by default */
49 #define SCTP_DEFAULT_SACK_FREQ 2
51 /* Address limit - This variable is calculated
52 * based on an 65535 byte max ip packet. We take out 100 bytes
53 * for the cookie, 40 bytes for a v6 header and 32
54 * bytes for the init structure. A second init structure
55 * for the init-ack and then finally a third one for the
56 * imbedded init. This yeilds 100+40+(3 * 32) = 236 bytes.
57 * This leaves 65299 bytes for addresses. We throw out the 299 bytes.
58 * Now whatever we send in the INIT() we need to allow to get back in the
59 * INIT-ACK plus all the values from INIT and INIT-ACK
60 * listed in the cookie. Plus we need some overhead for
61 * maybe copied parameters in the COOKIE. If we
62 * allow 1080 addresses, and each side has 1080 V6 addresses
63 * that will be 21600 bytes. In the INIT-ACK we will
64 * see the INIT-ACK 21600 + 43200 in the cookie. This leaves
65 * about 500 bytes slack for misc things in the cookie.
67 #define SCTP_ADDRESS_LIMIT 1080
69 /* We need at least 2k of space for us, inits
70 * larger than that lets abort.
72 #define SCTP_LARGEST_INIT_ACCEPTED (65535 - 2048)
74 /* Number of addresses where we just skip the counting */
75 #define SCTP_COUNT_LIMIT 40
77 #define SCTP_ZERO_COPY_TICK_DELAY (((100 * hz) + 999) / 1000)
78 #define SCTP_ZERO_COPY_SENDQ_TICK_DELAY (((100 * hz) + 999) / 1000)
80 /* Number of ticks to delay before running
81 * iterator on an address change.
83 #define SCTP_ADDRESS_TICK_DELAY 2
85 #define SCTP_VERSION_STRING "KAME-BSD 1.1"
86 /* #define SCTP_AUDITING_ENABLED 1 used for debug/auditing */
87 #define SCTP_AUDIT_SIZE 256
90 #define SCTP_KTRHEAD_NAME "sctp_iterator"
91 #define SCTP_KTHREAD_PAGES 0
93 #define SCTP_MCORE_NAME "sctp_core_worker"
96 /* If you support Multi-VRF how big to
97 * make the initial array of VRF's to.
99 #define SCTP_DEFAULT_VRF_SIZE 4
101 /* constants for rto calc */
102 #define sctp_align_safe_nocopy 0
103 #define sctp_align_unsafe_makecopy 1
105 /* JRS - Values defined for the HTCP algorithm */
106 #define ALPHA_BASE (1<<7) /* 1.0 with shift << 7 */
107 #define BETA_MIN (1<<6) /* 0.5 with shift << 7 */
108 #define BETA_MAX 102 /* 0.8 with shift << 7 */
110 /* Places that CWND log can happen from */
111 #define SCTP_CWND_LOG_FROM_FR 1
112 #define SCTP_CWND_LOG_FROM_RTX 2
113 #define SCTP_CWND_LOG_FROM_BRST 3
114 #define SCTP_CWND_LOG_FROM_SS 4
115 #define SCTP_CWND_LOG_FROM_CA 5
116 #define SCTP_CWND_LOG_FROM_SAT 6
117 #define SCTP_BLOCK_LOG_INTO_BLK 7
118 #define SCTP_BLOCK_LOG_OUTOF_BLK 8
119 #define SCTP_BLOCK_LOG_CHECK 9
120 #define SCTP_STR_LOG_FROM_INTO_STRD 10
121 #define SCTP_STR_LOG_FROM_IMMED_DEL 11
122 #define SCTP_STR_LOG_FROM_INSERT_HD 12
123 #define SCTP_STR_LOG_FROM_INSERT_MD 13
124 #define SCTP_STR_LOG_FROM_INSERT_TL 14
125 #define SCTP_STR_LOG_FROM_MARK_TSN 15
126 #define SCTP_STR_LOG_FROM_EXPRS_DEL 16
127 #define SCTP_FR_LOG_BIGGEST_TSNS 17
128 #define SCTP_FR_LOG_STRIKE_TEST 18
129 #define SCTP_FR_LOG_STRIKE_CHUNK 19
130 #define SCTP_FR_T3_TIMEOUT 20
131 #define SCTP_MAP_PREPARE_SLIDE 21
132 #define SCTP_MAP_SLIDE_FROM 22
133 #define SCTP_MAP_SLIDE_RESULT 23
134 #define SCTP_MAP_SLIDE_CLEARED 24
135 #define SCTP_MAP_SLIDE_NONE 25
136 #define SCTP_FR_T3_MARK_TIME 26
137 #define SCTP_FR_T3_MARKED 27
138 #define SCTP_FR_T3_STOPPED 28
139 #define SCTP_FR_MARKED 30
140 #define SCTP_CWND_LOG_NOADV_SS 31
141 #define SCTP_CWND_LOG_NOADV_CA 32
142 #define SCTP_MAX_BURST_APPLIED 33
143 #define SCTP_MAX_IFP_APPLIED 34
144 #define SCTP_MAX_BURST_ERROR_STOP 35
145 #define SCTP_INCREASE_PEER_RWND 36
146 #define SCTP_DECREASE_PEER_RWND 37
147 #define SCTP_SET_PEER_RWND_VIA_SACK 38
148 #define SCTP_LOG_MBCNT_INCREASE 39
149 #define SCTP_LOG_MBCNT_DECREASE 40
150 #define SCTP_LOG_MBCNT_CHKSET 41
151 #define SCTP_LOG_NEW_SACK 42
152 #define SCTP_LOG_TSN_ACKED 43
153 #define SCTP_LOG_TSN_REVOKED 44
154 #define SCTP_LOG_LOCK_TCB 45
155 #define SCTP_LOG_LOCK_INP 46
156 #define SCTP_LOG_LOCK_SOCK 47
157 #define SCTP_LOG_LOCK_SOCKBUF_R 48
158 #define SCTP_LOG_LOCK_SOCKBUF_S 49
159 #define SCTP_LOG_LOCK_CREATE 50
160 #define SCTP_LOG_INITIAL_RTT 51
161 #define SCTP_LOG_RTTVAR 52
162 #define SCTP_LOG_SBALLOC 53
163 #define SCTP_LOG_SBFREE 54
164 #define SCTP_LOG_SBRESULT 55
165 #define SCTP_FR_DUPED 56
166 #define SCTP_FR_MARKED_EARLY 57
167 #define SCTP_FR_CWND_REPORT 58
168 #define SCTP_FR_CWND_REPORT_START 59
169 #define SCTP_FR_CWND_REPORT_STOP 60
170 #define SCTP_CWND_LOG_FROM_SEND 61
171 #define SCTP_CWND_INITIALIZATION 62
172 #define SCTP_CWND_LOG_FROM_T3 63
173 #define SCTP_CWND_LOG_FROM_SACK 64
174 #define SCTP_CWND_LOG_NO_CUMACK 65
175 #define SCTP_CWND_LOG_FROM_RESEND 66
176 #define SCTP_FR_LOG_CHECK_STRIKE 67
177 #define SCTP_SEND_NOW_COMPLETES 68
178 #define SCTP_CWND_LOG_FILL_OUTQ_CALLED 69
179 #define SCTP_CWND_LOG_FILL_OUTQ_FILLS 70
180 #define SCTP_LOG_FREE_SENT 71
181 #define SCTP_NAGLE_APPLIED 72
182 #define SCTP_NAGLE_SKIPPED 73
183 #define SCTP_WAKESND_FROM_SACK 74
184 #define SCTP_WAKESND_FROM_FWDTSN 75
185 #define SCTP_NOWAKE_FROM_SACK 76
186 #define SCTP_CWNDLOG_PRESEND 77
187 #define SCTP_CWNDLOG_ENDSEND 78
188 #define SCTP_AT_END_OF_SACK 79
189 #define SCTP_REASON_FOR_SC 80
190 #define SCTP_BLOCK_LOG_INTO_BLKA 81
191 #define SCTP_ENTER_USER_RECV 82
192 #define SCTP_USER_RECV_SACKS 83
193 #define SCTP_SORECV_BLOCKSA 84
194 #define SCTP_SORECV_BLOCKSB 85
195 #define SCTP_SORECV_DONE 86
196 #define SCTP_SACK_RWND_UPDATE 87
197 #define SCTP_SORECV_ENTER 88
198 #define SCTP_SORECV_ENTERPL 89
199 #define SCTP_MBUF_INPUT 90
200 #define SCTP_MBUF_IALLOC 91
201 #define SCTP_MBUF_IFREE 92
202 #define SCTP_MBUF_ICOPY 93
203 #define SCTP_MBUF_SPLIT 94
204 #define SCTP_SORCV_FREECTL 95
205 #define SCTP_SORCV_DOESCPY 96
206 #define SCTP_SORCV_DOESLCK 97
207 #define SCTP_SORCV_DOESADJ 98
208 #define SCTP_SORCV_BOTWHILE 99
209 #define SCTP_SORCV_PASSBF 100
210 #define SCTP_SORCV_ADJD 101
211 #define SCTP_UNKNOWN_MAX 102
212 #define SCTP_RANDY_STUFF 103
213 #define SCTP_RANDY_STUFF1 104
214 #define SCTP_STRMOUT_LOG_ASSIGN 105
215 #define SCTP_STRMOUT_LOG_SEND 106
216 #define SCTP_FLIGHT_LOG_DOWN_CA 107
217 #define SCTP_FLIGHT_LOG_UP 108
218 #define SCTP_FLIGHT_LOG_DOWN_GAP 109
219 #define SCTP_FLIGHT_LOG_DOWN_RSND 110
220 #define SCTP_FLIGHT_LOG_UP_RSND 111
221 #define SCTP_FLIGHT_LOG_DOWN_RSND_TO 112
222 #define SCTP_FLIGHT_LOG_DOWN_WP 113
223 #define SCTP_FLIGHT_LOG_UP_REVOKE 114
224 #define SCTP_FLIGHT_LOG_DOWN_PDRP 115
225 #define SCTP_FLIGHT_LOG_DOWN_PMTU 116
226 #define SCTP_SACK_LOG_NORMAL 117
227 #define SCTP_SACK_LOG_EXPRESS 118
228 #define SCTP_MAP_TSN_ENTERS 119
229 #define SCTP_THRESHOLD_CLEAR 120
230 #define SCTP_THRESHOLD_INCR 121
231 #define SCTP_FLIGHT_LOG_DWN_WP_FWD 122
232 #define SCTP_FWD_TSN_CHECK 123
233 #define SCTP_LOG_MAX_TYPES 124
235 * To turn on various logging, you must first enable 'options KTR' and
236 * you might want to bump the entires 'options KTR_ENTRIES=80000'.
237 * To get something to log you define one of the logging defines.
240 * This gets the compile in place, but you still need to turn the
241 * logging flag on too in the sysctl (see in sctp.h).
244 #define SCTP_LOG_EVENT_UNKNOWN 0
245 #define SCTP_LOG_EVENT_CWND 1
246 #define SCTP_LOG_EVENT_BLOCK 2
247 #define SCTP_LOG_EVENT_STRM 3
248 #define SCTP_LOG_EVENT_FR 4
249 #define SCTP_LOG_EVENT_MAP 5
250 #define SCTP_LOG_EVENT_MAXBURST 6
251 #define SCTP_LOG_EVENT_RWND 7
252 #define SCTP_LOG_EVENT_MBCNT 8
253 #define SCTP_LOG_EVENT_SACK 9
254 #define SCTP_LOG_LOCK_EVENT 10
255 #define SCTP_LOG_EVENT_RTT 11
256 #define SCTP_LOG_EVENT_SB 12
257 #define SCTP_LOG_EVENT_NAGLE 13
258 #define SCTP_LOG_EVENT_WAKE 14
259 #define SCTP_LOG_MISC_EVENT 15
260 #define SCTP_LOG_EVENT_CLOSE 16
261 #define SCTP_LOG_EVENT_MBUF 17
262 #define SCTP_LOG_CHUNK_PROC 18
263 #define SCTP_LOG_ERROR_RET 19
265 #define SCTP_LOG_MAX_EVENT 20
267 #define SCTP_LOCK_UNKNOWN 2
270 /* number of associations by default for zone allocation */
271 #define SCTP_MAX_NUM_OF_ASOC 40000
272 /* how many addresses per assoc remote and local */
273 #define SCTP_SCALE_FOR_ADDR 2
275 /* default MULTIPLE_ASCONF mode enable(1)/disable(0) value (sysctl) */
276 #define SCTP_DEFAULT_MULTIPLE_ASCONFS 0
279 * Theshold for rwnd updates, we have to read (sb_hiwat >>
280 * SCTP_RWND_HIWAT_SHIFT) before we will look to see if we need to send a
281 * window update sack. When we look, we compare the last rwnd we sent vs the
282 * current rwnd. It too must be greater than this value. Using 3 divdes the
283 * hiwat by 8, so for 200k rwnd we need to read 24k. For a 64k rwnd we need
284 * to read 8k. This seems about right.. I hope :-D.. we do set a
285 * min of a MTU on it so if the rwnd is real small we will insist
286 * on a full MTU of 1500 bytes.
288 #define SCTP_RWND_HIWAT_SHIFT 3
290 /* How much of the rwnd must the
291 * message be taking up to start partial delivery.
292 * We calculate this by shifing the hi_water (recv_win)
293 * left the following .. set to 1, when a message holds
294 * 1/2 the rwnd. If we set it to 2 when a message holds
295 * 1/4 the rwnd...etc..
298 #define SCTP_PARTIAL_DELIVERY_SHIFT 1
301 * default HMAC for cookies, etc... use one of the AUTH HMAC id's
302 * SCTP_HMAC is the HMAC_ID to use
303 * SCTP_SIGNATURE_SIZE is the digest length
305 #define SCTP_HMAC SCTP_AUTH_HMAC_ID_SHA1
306 #define SCTP_SIGNATURE_SIZE SCTP_AUTH_DIGEST_LEN_SHA1
307 #define SCTP_SIGNATURE_ALOC_SIZE SCTP_SIGNATURE_SIZE
310 * the SCTP protocol signature this includes the version number encoded in
311 * the last 4 bits of the signature.
313 #define PROTO_SIGNATURE_A 0x30000000
314 #define SCTP_VERSION_NUMBER 0x3
316 #define MAX_TSN 0xffffffff
318 /* how many executions every N tick's */
319 #define SCTP_ITERATOR_MAX_AT_ONCE 20
321 /* number of clock ticks between iterator executions */
322 #define SCTP_ITERATOR_TICKS 1
325 * option: If you comment out the following you will receive the old behavior
326 * of obeying cwnd for the fast retransmit algorithm. With this defined a FR
327 * happens right away with-out waiting for the flightsize to drop below the
328 * cwnd value (which is reduced by the FR to 1/2 the inflight packets).
330 #define SCTP_IGNORE_CWND_ON_FR 1
333 * Adds implementors guide behavior to only use newest highest update in SACK
334 * gap ack's to figure out if you need to stroke a chunk for FR.
336 #define SCTP_NO_FR_UNLESS_SEGMENT_SMALLER 1
338 /* default max I can burst out after a fast retransmit, 0 disables it */
339 #define SCTP_DEF_MAX_BURST 4
340 #define SCTP_DEF_HBMAX_BURST 4
341 #define SCTP_DEF_FRMAX_BURST 4
343 /* RTO calculation flag to say if it
344 * is safe to determine local lan or not.
346 #define SCTP_RTT_FROM_NON_DATA 0
347 #define SCTP_RTT_FROM_DATA 1
350 /* IP hdr (20/40) + 12+2+2 (enet) + sctp common 12 */
351 #define SCTP_FIRST_MBUF_RESV 68
352 /* Packet transmit states in the sent field */
353 #define SCTP_DATAGRAM_UNSENT 0
354 #define SCTP_DATAGRAM_SENT 1
355 #define SCTP_DATAGRAM_RESEND1 2 /* not used (in code, but may
357 #define SCTP_DATAGRAM_RESEND2 3 /* not used (in code, but may
359 #define SCTP_DATAGRAM_RESEND 4
360 #define SCTP_DATAGRAM_ACKED 10010
361 #define SCTP_DATAGRAM_MARKED 20010
362 #define SCTP_FORWARD_TSN_SKIP 30010
363 #define SCTP_DATAGRAM_NR_ACKED 40010
365 /* chunk output send from locations */
366 #define SCTP_OUTPUT_FROM_USR_SEND 0
367 #define SCTP_OUTPUT_FROM_T3 1
368 #define SCTP_OUTPUT_FROM_INPUT_ERROR 2
369 #define SCTP_OUTPUT_FROM_CONTROL_PROC 3
370 #define SCTP_OUTPUT_FROM_SACK_TMR 4
371 #define SCTP_OUTPUT_FROM_SHUT_TMR 5
372 #define SCTP_OUTPUT_FROM_HB_TMR 6
373 #define SCTP_OUTPUT_FROM_SHUT_ACK_TMR 7
374 #define SCTP_OUTPUT_FROM_ASCONF_TMR 8
375 #define SCTP_OUTPUT_FROM_STRRST_TMR 9
376 #define SCTP_OUTPUT_FROM_AUTOCLOSE_TMR 10
377 #define SCTP_OUTPUT_FROM_EARLY_FR_TMR 11
378 #define SCTP_OUTPUT_FROM_STRRST_REQ 12
379 #define SCTP_OUTPUT_FROM_USR_RCVD 13
380 #define SCTP_OUTPUT_FROM_COOKIE_ACK 14
381 #define SCTP_OUTPUT_FROM_DRAIN 15
382 #define SCTP_OUTPUT_FROM_CLOSING 16
383 #define SCTP_OUTPUT_FROM_SOCKOPT 17
385 /* SCTP chunk types are moved sctp.h for application (NAT, FW) use */
387 /* align to 32-bit sizes */
388 #define SCTP_SIZE32(x) ((((x) + 3) >> 2) << 2)
390 #define IS_SCTP_CONTROL(a) ((a)->chunk_type != SCTP_DATA)
391 #define IS_SCTP_DATA(a) ((a)->chunk_type == SCTP_DATA)
394 /* SCTP parameter types */
395 /*************0x0000 series*************/
396 #define SCTP_HEARTBEAT_INFO 0x0001
397 #if defined(__Userspace__)
398 #define SCTP_CONN_ADDRESS 0x0004
400 #define SCTP_IPV4_ADDRESS 0x0005
401 #define SCTP_IPV6_ADDRESS 0x0006
402 #define SCTP_STATE_COOKIE 0x0007
403 #define SCTP_UNRECOG_PARAM 0x0008
404 #define SCTP_COOKIE_PRESERVE 0x0009
405 #define SCTP_HOSTNAME_ADDRESS 0x000b
406 #define SCTP_SUPPORTED_ADDRTYPE 0x000c
408 /* draft-ietf-stewart-tsvwg-strreset-xxx */
409 #define SCTP_STR_RESET_OUT_REQUEST 0x000d
410 #define SCTP_STR_RESET_IN_REQUEST 0x000e
411 #define SCTP_STR_RESET_TSN_REQUEST 0x000f
412 #define SCTP_STR_RESET_RESPONSE 0x0010
413 #define SCTP_STR_RESET_ADD_OUT_STREAMS 0x0011
414 #define SCTP_STR_RESET_ADD_IN_STREAMS 0x0012
416 #define SCTP_MAX_RESET_PARAMS 2
417 #define SCTP_STREAM_RESET_TSN_DELTA 0x1000
419 /*************0x4000 series*************/
421 /*************0x8000 series*************/
422 #define SCTP_ECN_CAPABLE 0x8000
424 /* draft-ietf-tsvwg-auth-xxx */
425 #define SCTP_RANDOM 0x8002
426 #define SCTP_CHUNK_LIST 0x8003
427 #define SCTP_HMAC_LIST 0x8004
429 * draft-ietf-tsvwg-addip-sctp-xx param=0x8008 len=0xNNNN Byte | Byte | Byte
430 * | Byte Byte | Byte ...
432 * Where each byte is a chunk type extension supported. For example, to support
433 * all chunks one would have (in hex):
435 * 80 01 00 09 C0 C1 80 81 82 00 00 00
437 * Has the parameter. C0 = PR-SCTP (RFC3758) C1, 80 = ASCONF (addip draft) 81
438 * = Packet Drop 82 = Stream Reset 83 = Authentication
440 #define SCTP_SUPPORTED_CHUNK_EXT 0x8008
442 /*************0xC000 series*************/
443 #define SCTP_PRSCTP_SUPPORTED 0xc000
444 /* draft-ietf-tsvwg-addip-sctp */
445 #define SCTP_ADD_IP_ADDRESS 0xc001
446 #define SCTP_DEL_IP_ADDRESS 0xc002
447 #define SCTP_ERROR_CAUSE_IND 0xc003
448 #define SCTP_SET_PRIM_ADDR 0xc004
449 #define SCTP_SUCCESS_REPORT 0xc005
450 #define SCTP_ULP_ADAPTATION 0xc006
451 /* behave-nat-draft */
452 #define SCTP_HAS_NAT_SUPPORT 0xc007
453 #define SCTP_NAT_VTAGS 0xc008
455 /* bits for TOS field */
456 #define SCTP_ECT0_BIT 0x02
457 #define SCTP_ECT1_BIT 0x01
458 #define SCTP_CE_BITS 0x03
460 /* below turns off above */
461 #define SCTP_FLEXIBLE_ADDRESS 0x20
462 #define SCTP_NO_HEARTBEAT 0x40
464 /* mask to get sticky */
465 #define SCTP_STICKY_OPTIONS_MASK 0x0c
469 * SCTP states for internal state machine XXX (should match "user" values)
471 #define SCTP_STATE_EMPTY 0x0000
472 #define SCTP_STATE_INUSE 0x0001
473 #define SCTP_STATE_COOKIE_WAIT 0x0002
474 #define SCTP_STATE_COOKIE_ECHOED 0x0004
475 #define SCTP_STATE_OPEN 0x0008
476 #define SCTP_STATE_SHUTDOWN_SENT 0x0010
477 #define SCTP_STATE_SHUTDOWN_RECEIVED 0x0020
478 #define SCTP_STATE_SHUTDOWN_ACK_SENT 0x0040
479 #define SCTP_STATE_SHUTDOWN_PENDING 0x0080
480 #define SCTP_STATE_CLOSED_SOCKET 0x0100
481 #define SCTP_STATE_ABOUT_TO_BE_FREED 0x0200
482 #define SCTP_STATE_PARTIAL_MSG_LEFT 0x0400
483 #define SCTP_STATE_WAS_ABORTED 0x0800
484 #define SCTP_STATE_IN_ACCEPT_QUEUE 0x1000
485 #define SCTP_STATE_MASK 0x007f
487 #define SCTP_GET_STATE(asoc) ((asoc)->state & SCTP_STATE_MASK)
488 #define SCTP_SET_STATE(asoc, newstate) ((asoc)->state = ((asoc)->state & ~SCTP_STATE_MASK) | newstate)
489 #define SCTP_CLEAR_SUBSTATE(asoc, substate) ((asoc)->state &= ~substate)
490 #define SCTP_ADD_SUBSTATE(asoc, substate) ((asoc)->state |= substate)
492 /* SCTP reachability state for each address */
493 #define SCTP_ADDR_REACHABLE 0x001
494 #define SCTP_ADDR_NO_PMTUD 0x002
495 #define SCTP_ADDR_NOHB 0x004
496 #define SCTP_ADDR_BEING_DELETED 0x008
497 #define SCTP_ADDR_NOT_IN_ASSOC 0x010
498 #define SCTP_ADDR_OUT_OF_SCOPE 0x080
499 #define SCTP_ADDR_UNCONFIRMED 0x200
500 #define SCTP_ADDR_REQ_PRIMARY 0x400
501 /* JRS 5/13/07 - Added potentially failed state for CMT PF */
502 #define SCTP_ADDR_PF 0x800
504 /* bound address types (e.g. valid address types to allow) */
505 #define SCTP_BOUND_V6 0x01
506 #define SCTP_BOUND_V4 0x02
509 * what is the default number of mbufs in a chain I allow before switching to
512 #define SCTP_DEFAULT_MBUFS_IN_CHAIN 5
514 /* How long a cookie lives in milli-seconds */
515 #define SCTP_DEFAULT_COOKIE_LIFE 60000
517 /* Maximum the mapping array will grow to (TSN mapping array) */
518 #define SCTP_MAPPING_ARRAY 512
520 /* size of the inital malloc on the mapping array */
521 #define SCTP_INITIAL_MAPPING_ARRAY 16
522 /* how much we grow the mapping array each call */
523 #define SCTP_MAPPING_ARRAY_INCR 32
526 * Here we define the timer types used by the implementation as arguments in
527 * the set/get timer type calls.
529 #define SCTP_TIMER_INIT 0
530 #define SCTP_TIMER_RECV 1
531 #define SCTP_TIMER_SEND 2
532 #define SCTP_TIMER_HEARTBEAT 3
533 #define SCTP_TIMER_PMTU 4
534 #define SCTP_TIMER_MAXSHUTDOWN 5
535 #define SCTP_TIMER_SIGNATURE 6
537 * number of timer types in the base SCTP structure used in the set/get and
538 * has the base default.
540 #define SCTP_NUM_TMRS 7
543 #define SCTP_TIMER_TYPE_NONE 0
544 #define SCTP_TIMER_TYPE_SEND 1
545 #define SCTP_TIMER_TYPE_INIT 2
546 #define SCTP_TIMER_TYPE_RECV 3
547 #define SCTP_TIMER_TYPE_SHUTDOWN 4
548 #define SCTP_TIMER_TYPE_HEARTBEAT 5
549 #define SCTP_TIMER_TYPE_COOKIE 6
550 #define SCTP_TIMER_TYPE_NEWCOOKIE 7
551 #define SCTP_TIMER_TYPE_PATHMTURAISE 8
552 #define SCTP_TIMER_TYPE_SHUTDOWNACK 9
553 #define SCTP_TIMER_TYPE_ASCONF 10
554 #define SCTP_TIMER_TYPE_SHUTDOWNGUARD 11
555 #define SCTP_TIMER_TYPE_AUTOCLOSE 12
556 #define SCTP_TIMER_TYPE_EVENTWAKE 13
557 #define SCTP_TIMER_TYPE_STRRESET 14
558 #define SCTP_TIMER_TYPE_INPKILL 15
559 #define SCTP_TIMER_TYPE_ASOCKILL 16
560 #define SCTP_TIMER_TYPE_ADDR_WQ 17
561 #define SCTP_TIMER_TYPE_ZERO_COPY 18
562 #define SCTP_TIMER_TYPE_ZCOPY_SENDQ 19
563 #define SCTP_TIMER_TYPE_PRIM_DELETED 20
564 /* add new timers here - and increment LAST */
565 #define SCTP_TIMER_TYPE_LAST 21
567 #define SCTP_IS_TIMER_TYPE_VALID(t) (((t) > SCTP_TIMER_TYPE_NONE) && \
568 ((t) < SCTP_TIMER_TYPE_LAST))
571 #if defined(__APPLE__)
572 /* Number of ticks to run the main timer at in msec */
573 #define SCTP_MAIN_TIMER_DEFAULT 10
576 /* max number of TSN's dup'd that I will hold */
577 #define SCTP_MAX_DUP_TSNS 20
580 * Here we define the types used when setting the retry amounts.
582 /* How many drop re-attempts we make on INIT/COOKIE-ECHO */
583 #define SCTP_RETRY_DROPPED_THRESH 4
586 * Maxmium number of chunks a single association can have on it. Note that
587 * this is a squishy number since the count can run over this if the user
588 * sends a large message down .. the fragmented chunks don't count until
589 * AFTER the message is on queue.. it would be the next send that blocks
590 * things. This number will get tuned up at boot in the sctp_init and use the
591 * number of clusters as a base. This way high bandwidth environments will
592 * not get impacted by the lower bandwidth sending a bunch of 1 byte chunks
595 #define SCTP_ASOC_MAX_CHUNKS_ON_QUEUE 10240
597 #define SCTP_ASOC_MAX_CHUNKS_ON_QUEUE 512
601 /* The conversion from time to ticks and vice versa is done by rounding
602 * upwards. This way we can test in the code the time to be positive and
603 * know that this corresponds to a positive number of ticks.
605 #define MSEC_TO_TICKS(x) ((hz == 1000) ? x : ((((x) * hz) + 999) / 1000))
606 #define TICKS_TO_MSEC(x) ((hz == 1000) ? x : ((((x) * 1000) + (hz - 1)) / hz))
608 #define SEC_TO_TICKS(x) ((x) * hz)
609 #define TICKS_TO_SEC(x) (((x) + (hz - 1)) / hz)
612 * Basically the minimum amount of time before I do a early FR. Making this
613 * value to low will cause duplicate retransmissions.
615 #define SCTP_MINFR_MSEC_TIMER 250
616 /* The floor this value is allowed to fall to when starting a timer. */
617 #define SCTP_MINFR_MSEC_FLOOR 20
619 /* init timer def = 1 sec */
620 #define SCTP_INIT_SEC 1
622 /* send timer def = 1 seconds */
623 #define SCTP_SEND_SEC 1
625 /* recv timer def = 200ms */
626 #define SCTP_RECV_MSEC 200
628 /* 30 seconds + RTO (in ms) */
629 #define SCTP_HB_DEFAULT_MSEC 30000
631 /* Max time I will wait for Shutdown to complete */
632 #define SCTP_DEF_MAX_SHUTDOWN_SEC 180
636 * This is how long a secret lives, NOT how long a cookie lives how many
637 * ticks the current secret will live.
639 #define SCTP_DEFAULT_SECRET_LIFE_SEC 3600
641 #define SCTP_RTO_UPPER_BOUND (60000) /* 60 sec in ms */
642 #define SCTP_RTO_LOWER_BOUND (1000) /* 1 sec is ms */
643 #define SCTP_RTO_INITIAL (3000) /* 3 sec in ms */
646 #define SCTP_INP_KILL_TIMEOUT 20 /* number of ms to retry kill of inpcb */
647 #define SCTP_ASOC_KILL_TIMEOUT 10 /* number of ms to retry kill of inpcb */
649 #define SCTP_DEF_MAX_INIT 8
650 #define SCTP_DEF_MAX_SEND 10
651 #define SCTP_DEF_MAX_PATH_RTX 5
652 #define SCTP_DEF_PATH_PF_THRESHOLD SCTP_DEF_MAX_PATH_RTX
654 #define SCTP_DEF_PMTU_RAISE_SEC 600 /* 10 min between raise attempts */
657 /* How many streams I request initally by default */
658 #define SCTP_OSTREAM_INITIAL 10
659 #define SCTP_ISTREAM_INITIAL 2048
662 * How many smallest_mtu's need to increase before a window update sack is
663 * sent (should be a power of 2).
665 /* Send window update (incr * this > hiwat). Should be a power of 2 */
666 #define SCTP_MINIMAL_RWND (4096) /* minimal rwnd */
668 #define SCTP_ADDRMAX 16
670 /* SCTP DEBUG Switch parameters */
671 #define SCTP_DEBUG_TIMER1 0x00000001
672 #define SCTP_DEBUG_TIMER2 0x00000002 /* unused */
673 #define SCTP_DEBUG_TIMER3 0x00000004 /* unused */
674 #define SCTP_DEBUG_TIMER4 0x00000008
675 #define SCTP_DEBUG_OUTPUT1 0x00000010
676 #define SCTP_DEBUG_OUTPUT2 0x00000020
677 #define SCTP_DEBUG_OUTPUT3 0x00000040
678 #define SCTP_DEBUG_OUTPUT4 0x00000080
679 #define SCTP_DEBUG_UTIL1 0x00000100
680 #define SCTP_DEBUG_UTIL2 0x00000200 /* unused */
681 #define SCTP_DEBUG_AUTH1 0x00000400
682 #define SCTP_DEBUG_AUTH2 0x00000800 /* unused */
683 #define SCTP_DEBUG_INPUT1 0x00001000
684 #define SCTP_DEBUG_INPUT2 0x00002000
685 #define SCTP_DEBUG_INPUT3 0x00004000
686 #define SCTP_DEBUG_INPUT4 0x00008000 /* unused */
687 #define SCTP_DEBUG_ASCONF1 0x00010000
688 #define SCTP_DEBUG_ASCONF2 0x00020000
689 #define SCTP_DEBUG_OUTPUT5 0x00040000 /* unused */
690 #define SCTP_DEBUG_XXX 0x00080000 /* unused */
691 #define SCTP_DEBUG_PCB1 0x00100000
692 #define SCTP_DEBUG_PCB2 0x00200000 /* unused */
693 #define SCTP_DEBUG_PCB3 0x00400000
694 #define SCTP_DEBUG_PCB4 0x00800000
695 #define SCTP_DEBUG_INDATA1 0x01000000
696 #define SCTP_DEBUG_INDATA2 0x02000000 /* unused */
697 #define SCTP_DEBUG_INDATA3 0x04000000 /* unused */
698 #define SCTP_DEBUG_CRCOFFLOAD 0x08000000 /* unused */
699 #define SCTP_DEBUG_USRREQ1 0x10000000 /* unused */
700 #define SCTP_DEBUG_USRREQ2 0x20000000 /* unused */
701 #define SCTP_DEBUG_PEEL1 0x40000000
702 #if defined(__Userspace__)
703 #define SCTP_DEBUG_USR 0x80000000
705 #define SCTP_DEBUG_XXXXX 0x80000000 /* unused */
707 #define SCTP_DEBUG_ALL 0x7ff3ffff
708 #define SCTP_DEBUG_NOISY 0x00040000
710 /* What sender needs to see to avoid SWS or we consider peers rwnd 0 */
711 #define SCTP_SWS_SENDER_DEF 1420
714 * SWS is scaled to the sb_hiwat of the socket. A value of 2 is hiwat/4, 1
715 * would be hiwat/2 etc.
717 /* What receiver needs to see in sockbuf or we tell peer its 1 */
718 #define SCTP_SWS_RECEIVER_DEF 3000
720 #define SCTP_INITIAL_CWND 4380
722 #define SCTP_DEFAULT_MTU 1500 /* emergency default MTU */
723 /* amount peer is obligated to have in rwnd or I will abort */
724 #define SCTP_MIN_RWND 1500
726 #define SCTP_DEFAULT_MAXSEGMENT 65535
728 #define SCTP_CHUNK_BUFFER_SIZE 512
729 #define SCTP_PARAM_BUFFER_SIZE 512
731 /* small chunk store for looking at chunk_list in auth */
732 #define SCTP_SMALL_CHUNK_STORE 260
734 #define SCTP_HOW_MANY_SECRETS 2 /* how many secrets I keep */
736 #define SCTP_NUMBER_OF_SECRETS 8 /* or 8 * 4 = 32 octets */
737 #define SCTP_SECRET_SIZE 32 /* number of octets in a 256 bits */
741 * SCTP upper layer notifications
743 #define SCTP_NOTIFY_ASSOC_UP 1
744 #define SCTP_NOTIFY_ASSOC_DOWN 2
745 #define SCTP_NOTIFY_INTERFACE_DOWN 3
746 #define SCTP_NOTIFY_INTERFACE_UP 4
747 #define SCTP_NOTIFY_SENT_DG_FAIL 5
748 #define SCTP_NOTIFY_UNSENT_DG_FAIL 6
749 #define SCTP_NOTIFY_SPECIAL_SP_FAIL 7
750 #define SCTP_NOTIFY_ASSOC_LOC_ABORTED 8
751 #define SCTP_NOTIFY_ASSOC_REM_ABORTED 9
752 #define SCTP_NOTIFY_ASSOC_RESTART 10
753 #define SCTP_NOTIFY_PEER_SHUTDOWN 11
754 #define SCTP_NOTIFY_ASCONF_ADD_IP 12
755 #define SCTP_NOTIFY_ASCONF_DELETE_IP 13
756 #define SCTP_NOTIFY_ASCONF_SET_PRIMARY 14
757 #define SCTP_NOTIFY_PARTIAL_DELVIERY_INDICATION 15
758 #define SCTP_NOTIFY_INTERFACE_CONFIRMED 16
759 #define SCTP_NOTIFY_STR_RESET_RECV 17
760 #define SCTP_NOTIFY_STR_RESET_SEND 18
761 #define SCTP_NOTIFY_STR_RESET_FAILED_OUT 19
762 #define SCTP_NOTIFY_STR_RESET_FAILED_IN 20
763 #define SCTP_NOTIFY_STR_RESET_DENIED_OUT 21
764 #define SCTP_NOTIFY_STR_RESET_DENIED_IN 22
765 #define SCTP_NOTIFY_AUTH_NEW_KEY 23
766 #define SCTP_NOTIFY_AUTH_FREE_KEY 24
767 #define SCTP_NOTIFY_NO_PEER_AUTH 25
768 #define SCTP_NOTIFY_SENDER_DRY 26
769 #define SCTP_NOTIFY_REMOTE_ERROR 27
771 /* This is the value for messages that are NOT completely
772 * copied down where we will start to split the message.
773 * So, with our default, we split only if the piece we
774 * want to take will fill up a full MTU (assuming
777 #define SCTP_DEFAULT_SPLIT_POINT_MIN 2904
779 /* Maximum length of diagnostic information in error causes */
780 #define SCTP_DIAG_INFO_LEN 64
782 /* ABORT CODES and other tell-tale location
783 * codes are generated by adding the below
784 * to the instance id.
788 #define SCTP_FROM_SCTP_INPUT 0x10000000
789 #define SCTP_FROM_SCTP_PCB 0x20000000
790 #define SCTP_FROM_SCTP_INDATA 0x30000000
791 #define SCTP_FROM_SCTP_TIMER 0x40000000
792 #define SCTP_FROM_SCTP_USRREQ 0x50000000
793 #define SCTP_FROM_SCTPUTIL 0x60000000
794 #define SCTP_FROM_SCTP6_USRREQ 0x70000000
795 #define SCTP_FROM_SCTP_ASCONF 0x80000000
796 #define SCTP_FROM_SCTP_OUTPUT 0x90000000
797 #define SCTP_FROM_SCTP_PEELOFF 0xa0000000
798 #define SCTP_FROM_SCTP_PANDA 0xb0000000
799 #define SCTP_FROM_SCTP_SYSCTL 0xc0000000
802 #define SCTP_LOC_1 0x00000001
803 #define SCTP_LOC_2 0x00000002
804 #define SCTP_LOC_3 0x00000003
805 #define SCTP_LOC_4 0x00000004
806 #define SCTP_LOC_5 0x00000005
807 #define SCTP_LOC_6 0x00000006
808 #define SCTP_LOC_7 0x00000007
809 #define SCTP_LOC_8 0x00000008
810 #define SCTP_LOC_9 0x00000009
811 #define SCTP_LOC_10 0x0000000a
812 #define SCTP_LOC_11 0x0000000b
813 #define SCTP_LOC_12 0x0000000c
814 #define SCTP_LOC_13 0x0000000d
815 #define SCTP_LOC_14 0x0000000e
816 #define SCTP_LOC_15 0x0000000f
817 #define SCTP_LOC_16 0x00000010
818 #define SCTP_LOC_17 0x00000011
819 #define SCTP_LOC_18 0x00000012
820 #define SCTP_LOC_19 0x00000013
821 #define SCTP_LOC_20 0x00000014
822 #define SCTP_LOC_21 0x00000015
823 #define SCTP_LOC_22 0x00000016
824 #define SCTP_LOC_23 0x00000017
825 #define SCTP_LOC_24 0x00000018
826 #define SCTP_LOC_25 0x00000019
827 #define SCTP_LOC_26 0x0000001a
828 #define SCTP_LOC_27 0x0000001b
829 #define SCTP_LOC_28 0x0000001c
830 #define SCTP_LOC_29 0x0000001d
831 #define SCTP_LOC_30 0x0000001e
832 #define SCTP_LOC_31 0x0000001f
833 #define SCTP_LOC_32 0x00000020
834 #define SCTP_LOC_33 0x00000021
837 /* Free assoc codes */
838 #define SCTP_NORMAL_PROC 0
839 #define SCTP_PCBFREE_NOFORCE 1
840 #define SCTP_PCBFREE_FORCE 2
842 /* From codes for adding addresses */
843 #define SCTP_ADDR_IS_CONFIRMED 8
844 #define SCTP_ADDR_DYNAMIC_ADDED 6
845 #define SCTP_IN_COOKIE_PROC 100
846 #define SCTP_ALLOC_ASOC 1
847 #define SCTP_LOAD_ADDR_2 2
848 #define SCTP_LOAD_ADDR_3 3
849 #define SCTP_LOAD_ADDR_4 4
850 #define SCTP_LOAD_ADDR_5 5
852 #define SCTP_DONOT_SETSCOPE 0
853 #define SCTP_DO_SETSCOPE 1
856 /* This value determines the default for when
857 * we try to add more on the send queue., if
858 * there is room. This prevents us from cycling
859 * into the copy_resume routine to often if
860 * we have not got enough space to add a decent
861 * enough size message. Note that if we have enough
862 * space to complete the message copy we will always
863 * add to the message, no matter what the size. Its
864 * only when we reach the point that we have some left
865 * to add, there is only room for part of it that we
866 * will use this threshold. Its also a sysctl.
868 #define SCTP_DEFAULT_ADD_MORE 1452
870 #ifndef SCTP_PCBHASHSIZE
871 /* default number of association hash buckets in each endpoint */
872 #define SCTP_PCBHASHSIZE 256
874 #ifndef SCTP_TCBHASHSIZE
875 #define SCTP_TCBHASHSIZE 1024
878 #ifndef SCTP_CHUNKQUEUE_SCALE
879 #define SCTP_CHUNKQUEUE_SCALE 10
883 /* clock variance is 1 ms */
884 #define SCTP_CLOCK_GRANULARITY 1
886 /* clock variance is 10 ms */
887 #define SCTP_CLOCK_GRANULARITY 10
889 #define IP_HDR_SIZE 40 /* we use the size of a IP6 header here this
890 * detracts a small amount for ipv4 but it
891 * simplifies the ipv6 addition */
893 /* Argument magic number for sctp_inpcb_free() */
896 #define SCTP_CALLED_DIRECTLY_NOCMPSET 0
897 #define SCTP_CALLED_AFTER_CMPSET_OFCLOSE 1
898 #define SCTP_CALLED_FROM_INPKILL_TIMER 2
899 /* second argument */
900 #define SCTP_FREE_SHOULD_USE_ABORT 1
901 #define SCTP_FREE_SHOULD_USE_GRACEFUL_CLOSE 0
904 #define IPPROTO_SCTP 132 /* the Official IANA number :-) */
905 #endif /* !IPPROTO_SCTP */
907 #define SCTP_MAX_DATA_BUNDLING 256
909 /* modular comparison */
910 /* See RFC 1982 for details. */
911 #define SCTP_SSN_GT(a, b) (((a < b) && ((uint16_t)(b - a) > (1U<<15))) || \
912 ((a > b) && ((uint16_t)(a - b) < (1U<<15))))
913 #define SCTP_SSN_GE(a, b) (SCTP_SSN_GT(a, b) || (a == b))
914 #define SCTP_TSN_GT(a, b) (((a < b) && ((uint32_t)(b - a) > (1U<<31))) || \
915 ((a > b) && ((uint32_t)(a - b) < (1U<<31))))
916 #define SCTP_TSN_GE(a, b) (SCTP_TSN_GT(a, b) || (a == b))
918 /* Mapping array manipulation routines */
919 #define SCTP_IS_TSN_PRESENT(arry, gap) ((arry[(gap >> 3)] >> (gap & 0x07)) & 0x01)
920 #define SCTP_SET_TSN_PRESENT(arry, gap) (arry[(gap >> 3)] |= (0x01 << ((gap & 0x07))))
921 #define SCTP_UNSET_TSN_PRESENT(arry, gap) (arry[(gap >> 3)] &= ((~(0x01 << ((gap & 0x07)))) & 0xff))
922 #define SCTP_CALC_TSN_TO_GAP(gap, tsn, mapping_tsn) do { \
923 if (tsn >= mapping_tsn) { \
924 gap = tsn - mapping_tsn; \
926 gap = (MAX_TSN - mapping_tsn) + tsn + 1; \
931 #define SCTP_RETRAN_DONE -1
932 #define SCTP_RETRAN_EXIT -2
935 * This value defines the number of vtag block time wait entry's per list
936 * element. Each entry will take 2 4 byte ints (and of course the overhead
937 * of the next pointer as well). Using 15 as an example will yield * ((8 *
938 * 15) + 8) or 128 bytes of overhead for each timewait block that gets
939 * initialized. Increasing it to 31 would yeild 256 bytes per block.
941 #define SCTP_NUMBER_IN_VTAG_BLOCK 15
943 * If we use the STACK option, we have an array of this size head pointers.
944 * This array is mod'd the with the size to find which bucket and then all
945 * entries must be searched to see if the tag is in timed wait. If so we
948 #define SCTP_STACK_VTAG_HASH_SIZE 32
951 * Number of seconds of time wait for a vtag.
953 #define SCTP_TIME_WAIT 60
955 /* How many micro seconds is the cutoff from
956 * local lan type rtt's
959 * We allow 900us for the rtt.
961 #define SCTP_LOCAL_LAN_RTT 900
962 #define SCTP_LAN_UNKNOWN 0
963 #define SCTP_LAN_LOCAL 1
964 #define SCTP_LAN_INTERNET 2
966 #define SCTP_SEND_BUFFER_SPLITTING 0x00000001
967 #define SCTP_RECV_BUFFER_SPLITTING 0x00000002
969 /* The system retains a cache of free chunks such to
970 * cut down on calls the memory allocation system. There
971 * is a per association limit of free items and a overall
972 * system limit. If either one gets hit then the resource
973 * stops being cached.
976 #define SCTP_DEF_ASOC_RESC_LIMIT 10
977 #define SCTP_DEF_SYSTEM_RESC_LIMIT 1000
980 * defines for socket lock states.
981 * Used by __APPLE__ and SCTP_SO_LOCK_TESTING
983 #define SCTP_SO_LOCKED 1
984 #define SCTP_SO_NOT_LOCKED 0
987 #define SCTP_HOLDS_LOCK 1
988 #define SCTP_NOT_LOCKED 0
991 * For address locks, do we hold the lock?
993 #define SCTP_ADDR_LOCKED 1
994 #define SCTP_ADDR_NOT_LOCKED 0
996 #define IN4_ISPRIVATE_ADDRESS(a) \
997 ((((uint8_t *)&(a)->s_addr)[0] == 10) || \
998 ((((uint8_t *)&(a)->s_addr)[0] == 172) && \
999 (((uint8_t *)&(a)->s_addr)[1] >= 16) && \
1000 (((uint8_t *)&(a)->s_addr)[1] <= 32)) || \
1001 ((((uint8_t *)&(a)->s_addr)[0] == 192) && \
1002 (((uint8_t *)&(a)->s_addr)[1] == 168)))
1004 #define IN4_ISLOOPBACK_ADDRESS(a) \
1005 ((((uint8_t *)&(a)->s_addr)[0] == 127) && \
1006 (((uint8_t *)&(a)->s_addr)[1] == 0) && \
1007 (((uint8_t *)&(a)->s_addr)[2] == 0) && \
1008 (((uint8_t *)&(a)->s_addr)[3] == 1))
1010 #define IN4_ISLINKLOCAL_ADDRESS(a) \
1011 ((((uint8_t *)&(a)->s_addr)[0] == 169) && \
1012 (((uint8_t *)&(a)->s_addr)[1] == 254))
1014 #if defined(__Userspace__)
1015 #if defined(__Userspace_os_Windows)
1016 #define SCTP_GETTIME_TIMEVAL(x) getwintimeofday(x)
1017 #define SCTP_GETPTIME_TIMEVAL(x) getwintimeofday(x) /* this doesn't seem to ever be used.. */
1019 #define SCTP_GETTIME_TIMEVAL(x) gettimeofday(x, NULL)
1020 #define SCTP_GETPTIME_TIMEVAL(x) gettimeofday(x, NULL)
1024 #if defined(_KERNEL)
1025 #define SCTP_GETTIME_TIMEVAL(x) (getmicrouptime(x))
1026 #define SCTP_GETPTIME_TIMEVAL(x) (microuptime(x))
1029 #if defined(_KERNEL) || defined(__Userspace__)
1030 #define sctp_sowwakeup(inp, so) \
1032 if (inp->sctp_flags & SCTP_PCB_FLAGS_DONT_WAKE) { \
1033 inp->sctp_flags |= SCTP_PCB_FLAGS_WAKEOUTPUT; \
1039 #if defined(__FreeBSD__) || defined(__Windows__) || defined(__Userspace__)
1040 #define sctp_sowwakeup_locked(inp, so) \
1042 if (inp->sctp_flags & SCTP_PCB_FLAGS_DONT_WAKE) { \
1043 SOCKBUF_UNLOCK(&((so)->so_snd)); \
1044 inp->sctp_flags |= SCTP_PCB_FLAGS_WAKEOUTPUT; \
1046 sowwakeup_locked(so); \
1050 #define sctp_sowwakeup_locked(inp, so) \
1052 if (inp->sctp_flags & SCTP_PCB_FLAGS_DONT_WAKE) { \
1053 SOCKBUF_UNLOCK(&((so)->so_snd)); \
1054 inp->sctp_flags |= SCTP_PCB_FLAGS_WAKEOUTPUT; \
1061 #define sctp_sorwakeup(inp, so) \
1063 if (inp->sctp_flags & SCTP_PCB_FLAGS_DONT_WAKE) { \
1064 inp->sctp_flags |= SCTP_PCB_FLAGS_WAKEINPUT; \
1070 #if defined(__FreeBSD__) || defined(__Windows__) || defined(__Userspace__)
1071 #define sctp_sorwakeup_locked(inp, so) \
1073 if (inp->sctp_flags & SCTP_PCB_FLAGS_DONT_WAKE) { \
1074 inp->sctp_flags |= SCTP_PCB_FLAGS_WAKEINPUT; \
1075 SOCKBUF_UNLOCK(&((so)->so_rcv)); \
1077 sorwakeup_locked(so); \
1082 #define sctp_sorwakeup_locked(inp, so) \
1084 if (inp->sctp_flags & SCTP_PCB_FLAGS_DONT_WAKE) { \
1085 inp->sctp_flags |= SCTP_PCB_FLAGS_WAKEINPUT; \
1086 SOCKBUF_UNLOCK(&((so)->so_rcv)); \
1093 #endif /* _KERNEL || __Userspace__*/