- add sources.
[platform/framework/web/crosswalk.git] / src / third_party / npapi / npspy / extern / nspr / private / pprio.h
1 /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
2 /* 
3  * The contents of this file are subject to the Mozilla Public
4  * License Version 1.1 (the "License"); you may not use this file
5  * except in compliance with the License. You may obtain a copy of
6  * the License at http://www.mozilla.org/MPL/
7  * 
8  * Software distributed under the License is distributed on an "AS
9  * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
10  * implied. See the License for the specific language governing
11  * rights and limitations under the License.
12  * 
13  * The Original Code is the Netscape Portable Runtime (NSPR).
14  * 
15  * The Initial Developer of the Original Code is Netscape
16  * Communications Corporation.  Portions created by Netscape are 
17  * Copyright (C) 1998-2000 Netscape Communications Corporation.  All
18  * Rights Reserved.
19  * 
20  * Contributor(s):
21  * 
22  * Alternatively, the contents of this file may be used under the
23  * terms of the GNU General Public License Version 2 or later (the
24  * "GPL"), in which case the provisions of the GPL are applicable 
25  * instead of those above.  If you wish to allow use of your 
26  * version of this file only under the terms of the GPL and not to
27  * allow others to use your version of this file under the MPL,
28  * indicate your decision by deleting the provisions above and
29  * replace them with the notice and other provisions required by
30  * the GPL.  If you do not delete the provisions above, a recipient
31  * may use your version of this file under either the MPL or the
32  * GPL.
33  */
34
35 /*
36 ** File:        pprio.h
37 **
38 ** Description: Private definitions for I/O related structures
39 */
40
41 #ifndef pprio_h___
42 #define pprio_h___
43
44 #include "prtypes.h"
45 #include "prio.h"
46
47 PR_BEGIN_EXTERN_C
48
49 /************************************************************************/
50 /************************************************************************/
51
52 /* Return the method tables for files, tcp sockets and udp sockets */
53 NSPR_API(const PRIOMethods*)    PR_GetFileMethods(void);
54 NSPR_API(const PRIOMethods*)    PR_GetTCPMethods(void);
55 NSPR_API(const PRIOMethods*)    PR_GetUDPMethods(void);
56 NSPR_API(const PRIOMethods*)    PR_GetPipeMethods(void);
57
58 /*
59 ** Convert a NSPR Socket Handle to a Native Socket handle.
60 ** This function will be obsoleted with the next release; avoid using it.
61 */
62 NSPR_API(PRInt32)      PR_FileDesc2NativeHandle(PRFileDesc *);
63 NSPR_API(void)         PR_ChangeFileDescNativeHandle(PRFileDesc *, PRInt32);
64 NSPR_API(PRFileDesc*)  PR_AllocFileDesc(PRInt32 osfd,
65                                          const PRIOMethods *methods);
66 NSPR_API(void)         PR_FreeFileDesc(PRFileDesc *fd);
67 /*
68 ** Import an existing OS file to NSPR. 
69 */
70 NSPR_API(PRFileDesc*)  PR_ImportFile(PRInt32 osfd);
71 NSPR_API(PRFileDesc*)  PR_ImportPipe(PRInt32 osfd);
72 NSPR_API(PRFileDesc*)  PR_ImportTCPSocket(PRInt32 osfd);
73 NSPR_API(PRFileDesc*)  PR_ImportUDPSocket(PRInt32 osfd);
74
75
76 /*
77  *************************************************************************
78  * FUNCTION: PR_CreateSocketPollFd
79  * DESCRIPTION:
80  *     Create a PRFileDesc wrapper for a native socket handle, for use with
81  *         PR_Poll only
82  * INPUTS:
83  *     None
84  * OUTPUTS:
85  *     None
86  * RETURN: PRFileDesc*
87  *     Upon successful completion, PR_CreateSocketPollFd returns a pointer
88  *     to the PRFileDesc created for the native socket handle
89  *     Returns a NULL pointer if the create of a new PRFileDesc failed
90  *
91  **************************************************************************
92  */
93
94 NSPR_API(PRFileDesc*)   PR_CreateSocketPollFd(PRInt32 osfd);
95
96 /*
97  *************************************************************************
98  * FUNCTION: PR_DestroySocketPollFd
99  * DESCRIPTION:
100  *     Destroy the PRFileDesc wrapper created by PR_CreateSocketPollFd
101  * INPUTS:
102  *     None
103  * OUTPUTS:
104  *     None
105  * RETURN: PRFileDesc*
106  *     Upon successful completion, PR_DestroySocketPollFd returns
107  *         PR_SUCCESS, else PR_FAILURE
108  *
109  **************************************************************************
110  */
111
112 NSPR_API(PRStatus) PR_DestroySocketPollFd(PRFileDesc *fd);
113
114
115 /*
116 ** Macros for PR_Socket
117 **
118 ** Socket types: PR_SOCK_STREAM, PR_SOCK_DGRAM
119 */
120
121 #ifdef WIN32
122
123 #define PR_SOCK_STREAM 1
124 #define PR_SOCK_DGRAM 2
125
126 #else /* WIN32 */
127
128 #define PR_SOCK_STREAM SOCK_STREAM
129 #define PR_SOCK_DGRAM SOCK_DGRAM
130
131 #endif /* WIN32 */
132
133 /*
134 ** Create a new Socket; this function is obsolete.
135 */
136 NSPR_API(PRFileDesc*)   PR_Socket(PRInt32 domain, PRInt32 type, PRInt32 proto);
137
138 /* FUNCTION: PR_LockFile
139 ** DESCRIPTION:
140 **    Lock a file for exclusive access.
141 ** RETURNS:
142 **    PR_SUCCESS when the lock is held
143 **    PR_FAILURE otherwise
144 */
145 NSPR_API(PRStatus) PR_LockFile(PRFileDesc *fd);
146
147 /* FUNCTION: PR_TLockFile
148 ** DESCRIPTION:
149 **    Test and Lock a file for exclusive access.  Do not block if the
150 **    file cannot be locked immediately.
151 ** RETURNS:
152 **    PR_SUCCESS when the lock is held
153 **    PR_FAILURE otherwise
154 */
155 NSPR_API(PRStatus) PR_TLockFile(PRFileDesc *fd);
156
157 /* FUNCTION: PR_UnlockFile
158 ** DESCRIPTION:
159 **    Unlock a file which has been previously locked successfully by this
160 **    process.
161 ** RETURNS:
162 **    PR_SUCCESS when the lock is released
163 **    PR_FAILURE otherwise
164 */
165 NSPR_API(PRStatus) PR_UnlockFile(PRFileDesc *fd);
166
167 /*
168 ** Emulate acceptread by accept and recv.
169 */
170 NSPR_API(PRInt32) PR_EmulateAcceptRead(PRFileDesc *sd, PRFileDesc **nd,
171     PRNetAddr **raddr, void *buf, PRInt32 amount, PRIntervalTime timeout);
172
173 /*
174 ** Emulate sendfile by reading from the file and writing to the socket.
175 ** The file is memory-mapped if memory-mapped files are supported.
176 */
177 NSPR_API(PRInt32) PR_EmulateSendFile(
178     PRFileDesc *networkSocket, PRSendFileData *sendData,
179     PRTransmitFileFlags flags, PRIntervalTime timeout);
180
181 #ifdef WIN32
182 /* FUNCTION: PR_NTFast_AcceptRead
183 ** DESCRIPTION:
184 **    NT has the notion of an "accept context", which is only needed in
185 **    order to make certain calls.  By default, a socket connected via
186 **    AcceptEx can only do a limited number of things without updating
187 **    the acceptcontext.  The generic version of PR_AcceptRead always
188 **    updates the accept context.  This version does not.
189 **/
190 NSPR_API(PRInt32) PR_NTFast_AcceptRead(PRFileDesc *sd, PRFileDesc **nd,
191               PRNetAddr **raddr, void *buf, PRInt32 amount, PRIntervalTime t);
192
193 typedef void (*_PR_AcceptTimeoutCallback)(void *);
194
195 /* FUNCTION: PR_NTFast_AcceptRead_WithTimeoutCallback
196 ** DESCRIPTION:
197 **    The AcceptEx call combines the accept with the read function.  However,
198 **    our daemon threads need to be able to wakeup and reliably flush their
199 **    log buffers if the Accept times out.  However, with the current blocking
200 **    interface to AcceptRead, there is no way for us to timeout the Accept;
201 **    this is because when we timeout the Read, we can close the newly 
202 **    socket and continue; but when we timeout the accept itself, there is no
203 **    new socket to timeout.  So instead, this version of the function is
204 **    provided.  After the initial timeout period elapses on the accept()
205 **    portion of the function, it will call the callback routine and then
206 **    continue the accept.   If the timeout occurs on the read, it will 
207 **    close the connection and return error.
208 */
209 NSPR_API(PRInt32) PR_NTFast_AcceptRead_WithTimeoutCallback(
210               PRFileDesc *sd, 
211               PRFileDesc **nd,
212               PRNetAddr **raddr, 
213               void *buf, 
214               PRInt32 amount, 
215               PRIntervalTime t,
216               _PR_AcceptTimeoutCallback callback, 
217               void *callback_arg);
218
219 /* FUNCTION: PR_NTFast_Accept
220 ** DESCRIPTION:
221 **    NT has the notion of an "accept context", which is only needed in
222 **    order to make certain calls.  By default, a socket connected via
223 **    AcceptEx can only do a limited number of things without updating
224 **    the acceptcontext.  The generic version of PR_Accept always
225 **    updates the accept context.  This version does not.
226 **/
227 NSPR_API(PRFileDesc*)   PR_NTFast_Accept(PRFileDesc *fd, PRNetAddr *addr,
228                                                 PRIntervalTime timeout);
229
230 /* FUNCTION: PR_NTFast_Update
231 ** DESCRIPTION:
232 **    For sockets accepted with PR_NTFast_Accept or PR_NTFastAcceptRead,
233 **    this function will update the accept context for those sockets,
234 **    so that the socket can make general purpose socket calls.
235 **    Without calling this, the only operations supported on the socket
236 **    Are PR_Read, PR_Write, PR_Transmitfile, and PR_Close.
237 */
238 NSPR_API(void) PR_NTFast_UpdateAcceptContext(PRFileDesc *acceptSock, 
239                                         PRFileDesc *listenSock);
240
241
242 /* FUNCTION: PR_NT_CancelIo
243 ** DESCRIPTION:
244 **    Cancel IO operations on fd.
245 */
246 NSPR_API(PRStatus) PR_NT_CancelIo(PRFileDesc *fd);
247
248
249 #endif /* WIN32 */
250
251 /*
252 ** Need external access to this on Mac so we can first set up our faux
253 ** environment vars
254 */
255 #ifdef XP_MAC
256 NSPR_API(void) PR_Init_Log(void);
257 #endif
258
259
260 PR_END_EXTERN_C
261
262 #endif /* pprio_h___ */