build/tizen/configure.ac

   1 #
   2 # Copyright (c) 2015 Samsung Electronics Co., Ltd.
   3 #
   4 # Licensed under the Apache License, Version 2.0 (the "License");
   5 # you may not use this file except in compliance with the License.
   6 # You may obtain a copy of the License at
   7 #
   8 # http://www.apache.org/licenses/LICENSE-2.0
   9 #
  10 # Unless required by applicable law or agreed to in writing, software
  11 # distributed under the License is distributed on an "AS IS" BASIS,
  12 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  13 # See the License for the specific language governing permissions and
  14 # limitations under the License.
  15 #
  16
  17 m4_define([dali_version],[0.1.0])
  18 AC_INIT([dali], [dali_version])
  19 AM_INIT_AUTOMAKE([-Wall foreign])
  20
  21 AC_CONFIG_MACRO_DIR([m4])
  22
  23 AC_PROG_CXX
  24 AC_PROG_LIBTOOL
  25 AC_PROG_MKDIR_P
  26
  27 m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
  28
  29 LT_INIT
  30
  31 DALI_ADAPTOR_VERSION=dali_version
  32 AC_SUBST(DALI_ADAPTOR_VERSION)
  33
  34 FREETYPE_REQUIRED=9.16.3
  35 # 17.1.11 = Freetype version 2.5.2
  36 FREETYPE_BITMAP_SUPPORT_VERSION=17.1.11
  37
  38 PKG_CHECK_MODULES(DALICORE, dali-core)
  39 PKG_CHECK_MODULES(ELEMENTARY, elementary)
  40 PKG_CHECK_MODULES(ECORE, ecore)
  41 PKG_CHECK_MODULES(ECORE_IPC, ecore-ipc)
  42 PKG_CHECK_MODULES(EXIF, libexif)
  43 PKG_CHECK_MODULES(FREETYPE, [freetype2 >= $FREETYPE_REQUIRED])
  44 PKG_CHECK_MODULES(FREETYPE_BITMAP_SUPPORT, [freetype2 >= $FREETYPE_BITMAP_SUPPORT_VERSION], [ freetype_bitmap_support=yes  ], [ freetype_bitmap_support=no ] )
  45 PKG_CHECK_MODULES(FONTCONFIG, fontconfig)
  46 PKG_CHECK_MODULES(PNG, libpng)
  47 PKG_CHECK_MODULES(LIBEXIF, libexif)
  48 PKG_CHECK_MODULES(LIBDRM, libdrm)
  49 PKG_CHECK_MODULES(LIBCURL, libcurl)
  50 PKG_CHECK_MODULES(HARFBUZZ, harfbuzz)
  51 PKG_CHECK_MODULES(FRIBIDI, fribidi)
  52 PKG_CHECK_MODULES(TTRACE,  ttrace, AC_DEFINE(ENABLE_TTRACE, 1, [ttrace available]),
  53                   [ AC_MSG_NOTICE([Tizen Trace not avaiable]) ]
  54                   )
  55 PKG_CHECK_MODULES(ECORE_IMF, [ecore-imf >= 1.13], [ecore_imf_1_13=yes], [ecore_imf_1_13=no])
  56
  57
  58 # Check for EldBus.h in ECore
  59 PKG_CHECK_MODULES(ELDBUS, eldbus, [ eldbus_available=yes ],  [ eldbus_available=no ] )
  60
  61 DALI_ELDBUS_AVAILABLE=
  62 if test "x$eldbus_available" = "xyes"; then
  63   DALI_ELDBUS_AVAILABLE=true
  64   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDALI_ELDBUS_AVAILABLE "
  65 fi
  66 AC_SUBST(DALI_ELDBUS_AVAILABLE)
  67
  68
  69 AC_ARG_ENABLE([feedback],
  70               [AC_HELP_STRING([ --enable-feedback],
  71                               [Enable feedback plugin])],
  72               [enable_feedback=yes],
  73               [enable_feedback=no])
  74
  75 AM_CONDITIONAL([USE_FEEDBACK], [test x$enable_feedback = xyes])
  76
  77 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DPLATFORM_TIZEN"
  78
  79 AC_ARG_ENABLE(exportall,
  80               [AC_HELP_STRING([--enable-exportall],
  81                               [enables the exporting of all the symbols in the library])],
  82               [enable_exportall=yes],
  83               [enable_exportall=no])
  84
  85 AC_ARG_ENABLE([debug],
  86               [AC_HELP_STRING([--enable-debug],
  87                               [Turns on debugging])],
  88               [enable_debug=$enableval],
  89               [enable_debug=no])
  90
  91 AC_ARG_ENABLE(shaderbincache,
  92               [AC_HELP_STRING([--enable-shaderbincache],
  93                               [enables shader binary cache])],
  94               [enable_shaderbincache=$enableval],
  95               [enable_shaderbincache=DISABLE])
  96
  97 AC_ARG_ENABLE(networklogging,
  98               [AC_HELP_STRING([--enable-networklogging],
  99                               [enables network for debug tool])],
 100               [enable_networklogging=$enableval],
 101               [enable_networklogging=no])
 102
 103
 104 if test "x$enable_debug" = "xyes"; then
 105   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDEBUG_ENABLED"
 106 fi
 107
 108 if test "x$enable_debug" = "xno" -a "x$enable_exportall" = "xno"; then
 109   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -fvisibility=hidden -DHIDE_DALI_INTERNALS"
 110 fi
 111
 112 if test "x$enable_shaderbincache" = "xENABLE"; then
 113   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DSHADERBIN_CACHE_ENABLED"
 114 fi
 115
 116 if test "x$enable_networklogging" = "xyes"; then
 117   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DNETWORK_LOGGING_ENABLED"
 118 fi
 119
 120 # If Ecore IMF version is greater than 1.13, then some structures are different
 121 if test "x$ecore_imf_1_13" = "xyes"; then
 122   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DECORE_IMF_1_13"
 123 fi
 124
 125 AC_ARG_ENABLE([gles],
 126               [AC_HELP_STRING([--enable-gles],
 127                               [Specify the OpenGL ES version for backwards compatibility])],
 128               [enable_gles=$enableval],
 129               [enable_gles=30])
 130
 131 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDALI_GLES_VERSION=${enable_gles}"
 132
 133 # node.js by default statically links against libuv, so it doesn't need to install
 134 # a libuv headers/ shared library. So we can't use pkg-config to access any headers.
 135 # As a work around we pass the node deps path so we can access the libuv headers inside nodes
 136 # directory
 137 AC_ARG_WITH([node-js],
 138               [AC_HELP_STRING([--with-node-js],
 139                               [Node.JS path that contains Lib UV headers. Setting this configures DALi to work with LibUV mainloop used in Node.JS.
 140                               For example /usr/tmp/downloads/node-v0.12.4/deps/uv/include/ ])],
 141               [with_node_js=$withval],
 142               [with_node_js=no])
 143
 144 # Node.JS already has a libuv main loop running,so we have to integrate with it
 145 AM_CONDITIONAL(LIB_UV_EVENT_LOOP, test x$with_node_js != xno)
 146
 147
 148 build_for_node_js=no
 149 if test "x$with_node_js" != "xno"; then
 150   AC_MSG_NOTICE("build for node_js == yes");
 151   [build_for_node_js=yes]
 152   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DNODE_JS_SUPPORT  -I${with_node_js}"
 153 else
 154  #not using node.js build
 155   AC_MSG_NOTICE("build for node_js == no");
 156 fi
 157
 158 # Option to allow building with Tizen SDK 2.2
 159 AC_ARG_WITH([tizen-2-2-compatibility],
 160             [AC_HELP_STRING([--with-tizen-2-2-compatibility],
 161                             [Use Tizen SDK 2.2 compatibility])],
 162             [with_tizen_2_2_compatibility=$withval],
 163             [with_tizen_2_2_compatibility=no])
 164
 165 # Tizen Profile options
 166 AC_ARG_ENABLE([profile],
 167               [AC_HELP_STRING([--enable-profile=COMMON,MOBILE,WEARABLE,TV,UBUNTU],
 168                             [Select the variant of tizen])],
 169               [enable_profile=$enableval],
 170               [enable_profile=COMMON])
 171
 172 # Ensure valid profile selected
 173 if test "x$enable_profile" != "xCOMMON" -a "x$enable_profile" != "xMOBILE" -a "x$enable_profile" != "xWEARABLE" -a "x$enable_profile" != "xTV" -a "x$enable_profile" != "xUBUNTU"; then
 174   AC_MSG_ERROR([$enable_profile is an invalid profile])
 175 fi
 176
 177 AC_ARG_ENABLE(wayland,
 178               [  --enable-wayland       Build on Wayland],
 179               enable_wayland=yes,
 180               enable_wayland=no)
 181
 182 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDALI_PROFILE_${enable_profile}"
 183 DALI_PROFILE_CFLAGS=" -DDALI_PROFILE_${enable_profile}"
 184 AM_CONDITIONAL([COMMON_PROFILE], [test x$enable_profile = xCOMMON])
 185 AM_CONDITIONAL([MOBILE_PROFILE], [test x$enable_profile = xMOBILE])
 186 AM_CONDITIONAL([WEARABLE_PROFILE], [test x$enable_profile = xWEARABLE])
 187 AM_CONDITIONAL([TV_PROFILE], [test x$enable_profile = xTV])
 188 AM_CONDITIONAL([UBUNTU_PROFILE], [test x$enable_profile = xUBUNTU])
 189 AM_CONDITIONAL([WAYLAND], [test x$enable_wayland = xyes])
 190
 191 AM_CONDITIONAL([ENABLE_NETWORK_LOGGING], [test x$enable_networklogging = xyes])
 192
 193 # Platforms should either enable features or remove them, they
 194 # should not disable features. This allows the developer to override
 195 # features through the command line.
 196
 197 if test "x$enable_profile" = "xCOMMON"; then
 198 PKG_CHECK_MODULES(OPENGLES20, glesv2 egl)
 199 fi
 200
 201 if test "x$enable_profile" = "xMOBILE"; then
 202 PKG_CHECK_MODULES(OPENGLES20, gles20)
 203 enable_assimp=no
 204 fi
 205
 206 if test "x$enable_profile" = "xLITE"; then
 207 PKG_CHECK_MODULES(OPENGLES20, gles20)
 208 fi
 209
 210 if test "x$enable_profile" = "xWEARABLE"; then
 211 PKG_CHECK_MODULES(OPENGLES20, gles20)
 212 fi
 213
 214 if test "x$enable_profile" = "xTV"; then
 215 PKG_CHECK_MODULES(OPENGLES20, glesv2)
 216 fi
 217
 218 if test "x$enable_profile" = "xUBUNTU"; then
 219 PKG_CHECK_MODULES(OPENGLES20, glesv2 egl)
 220 else
 221 PKG_CHECK_MODULES(CAPI_APPFW_APPLICATION, capi-appfw-application)
 222 PKG_CHECK_MODULES(DLOG, dlog)
 223 PKG_CHECK_MODULES(SENSOR, sensor)
 224 PKG_CHECK_MODULES(TTS, tts)
 225 PKG_CHECK_MODULES(VCONF, vconf)
 226 PKG_CHECK_MODULES(CAPI_SYSTEM_SYSTEM_SETTINGS, capi-system-system-settings)
 227
 228 if test "x$with_tizen_2_2_compatibility" = "xno"; then
 229 PKG_CHECK_MODULES(CAPI_SYSTEM_INFO, capi-system-info)
 230 fi
 231
 232 fi # ubuntu profile test
 233
 234 if test "x$enable_wayland" = "xyes"; then
 235 PKG_CHECK_MODULES(WAYLAND, [ecore-wayland egl wayland-egl wayland-client >= 1.2.0 xkbcommon],
 236                   [DALI_HAS_ECOREWL=yes],
 237                   [DALI_HAS_ECOREWL=no])
 238 else
 239 PKG_CHECK_MODULES(ECORE_X, [ecore-x],
 240                   [DALI_HAS_ECOREX=yes],
 241                   [DALI_HAS_ECOREX=no])
 242 PKG_CHECK_MODULES(X11, [x11],
 243                   [DALI_HAS_X11=yes],
 244                   [DALI_HAS_X11=no])
 245 fi
 246
 247 if test "x$enable_feedback" = "xyes"; then
 248
 249 if test "x$enable_profile" = "xCOMMON" || test "x$enable_profile" = "xTV"; then
 250 PKG_CHECK_MODULES(HAPTIC, haptic)
 251 fi
 252
 253 if test "x$enable_profile" = "xMOBILE"; then
 254 PKG_CHECK_MODULES(DEVICED, deviced)
 255 fi
 256
 257 PKG_CHECK_MODULES(FEEDBACK, feedback)
 258 PKG_CHECK_MODULES(MMFSOUND, mm-sound)
 259 fi
 260
 261 if test x$DALI_DATA_RW_DIR != x; then
 262   dataReadWriteDir=$DALI_DATA_RW_DIR
 263 else
 264   dataReadWriteDir=${prefix}/share/dali/
 265 fi
 266
 267 if test x$DALI_DATA_RO_DIR != x; then
 268   dataReadOnlyDir=$DALI_DATA_RO_DIR
 269 else
 270   dataReadOnlyDir=${prefix}/share/dali/
 271 fi
 272
 273 if test x$FONT_CONFIGURATION_FILE != x; then
 274   fontConfigurationFile=$FONT_CONFIGURATION_FILE
 275 fi
 276
 277 AC_SUBST(dataReadWriteDir)
 278 AC_SUBST(dataReadOnlyDir)
 279 AC_SUBST(DALI_ADAPTOR_CFLAGS)
 280 AC_SUBST(DALI_PROFILE_CFLAGS)
 281 AC_SUBST(fontConfigurationFile)
 282
 283
 284 # Specify the include directory for development headers
 285 #devincludepath=${includedir}/dali/internal
 286 devincludepath=${includedir}
 287 AC_SUBST(devincludepath)
 288
 289 AC_CONFIG_FILES([
 290  Makefile
 291  adaptor/Makefile
 292  dali.pc
 293  adaptor/dali-adaptor-integration.pc
 294 ])
 295
 296 AM_CONDITIONAL([USE_PLUGIN], [test x$enable_feedback = xyes])
 297
 298 if test "x$enable_feedback" = "xyes"; then
 299 AC_CONFIG_FILES([
 300  plugins/Makefile
 301 ])
 302 fi
 303
 304 if test "x$freetype_bitmap_support" = "xyes"; then
 305 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DFREETYPE_BITMAP_SUPPORT"
 306 fi
 307
 308 AC_OUTPUT
 309
 310
 311 echo "
 312 Configuration
 313 -------------
 314   Prefix:                           $prefix
 315   Debug Build:                      $enable_debug
 316   Compile flags                     $DALI_ADAPTOR_CFLAGS
 317   Freetype bitmap support (Emoji):  $freetype_bitmap_support
 318   Profile:                          $enable_profile
 319   Data Dir (Read/Write):            $dataReadWriteDir
 320   Data Dir (Read Only):             $dataReadOnlyDir
 321   Tizen SDK 2.2 compatibility:      $with_tizen_2_2_compatibility
 322   EldBus:                           $eldbus_available
 323   Shader Binary Cache:              $enable_shaderbincache
 324   Build for Node.JS (LibUV)         $build_for_node_js
 325   Ecore Version At Least 1.13.0     $ecore_imf_1_13
 326   Network logging enabled:          $enable_networklogging
 327   Font config file:                 $fontConfigurationFile
 328 "
 329 # optional output of node.js source path if we're building for node.js
 330 if test "x$build_for_node_js" != "xno"; then
 331 echo "  Node.JS LibUV header path         $with_node_js"
 332 fi