build/tizen/adaptor/configure.ac

   1 #
   2 # Copyright (c) 2017 Samsung Electronics Co., Ltd.
   3 #
   4 # Licensed under the Apache License, Version 2.0 (the "License");
   5 # you may not use this file except in compliance with the License.
   6 # You may obtain a copy of the License at
   7 #
   8 # http://www.apache.org/licenses/LICENSE-2.0
   9 #
  10 # Unless required by applicable law or agreed to in writing, software
  11 # distributed under the License is distributed on an "AS IS" BASIS,
  12 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  13 # See the License for the specific language governing permissions and
  14 # limitations under the License.
  15 #
  16
  17 m4_define([dali_version],[0.1.0])
  18 AC_INIT([dali], [dali_version])
  19 AM_INIT_AUTOMAKE([-Wall foreign])
  20
  21 AC_CONFIG_MACRO_DIR([m4])
  22
  23 AC_PROG_CXX
  24 AC_PROG_LIBTOOL
  25 AC_PROG_MKDIR_P
  26
  27 m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
  28
  29 LT_INIT
  30
  31 DALI_ADAPTOR_VERSION=dali_version
  32 AC_SUBST(DALI_ADAPTOR_VERSION)
  33
  34 FREETYPE_REQUIRED=9.16.3
  35 # 17.1.11 = Freetype version 2.5.2
  36 FREETYPE_BITMAP_SUPPORT_VERSION=17.1.11
  37
  38 PKG_CHECK_MODULES(EXIF, libexif)
  39 PKG_CHECK_MODULES(FREETYPE, [freetype2 >= $FREETYPE_REQUIRED])
  40 PKG_CHECK_MODULES(FREETYPE_BITMAP_SUPPORT, [freetype2 >= $FREETYPE_BITMAP_SUPPORT_VERSION], [ freetype_bitmap_support=yes  ], [ freetype_bitmap_support=no ] )
  41 PKG_CHECK_MODULES(FONTCONFIG, fontconfig)
  42 PKG_CHECK_MODULES(PNG, libpng)
  43 PKG_CHECK_MODULES(LIBEXIF, libexif)
  44 PKG_CHECK_MODULES(LIBDRM, libdrm)
  45 PKG_CHECK_MODULES(LIBCURL, libcurl)
  46 PKG_CHECK_MODULES(LIBCRYPTO, libcrypto)
  47 PKG_CHECK_MODULES(HARFBUZZ, harfbuzz)
  48 PKG_CHECK_MODULES(FRIBIDI, fribidi)
  49 PKG_CHECK_MODULES(EVAS, evas)
  50 PKG_CHECK_MODULES(TTRACE,  ttrace, AC_DEFINE(ENABLE_TTRACE, 1, [ttrace available]),
  51                   [ AC_MSG_NOTICE([Tizen Trace not avaiable]) ]
  52                   )
  53
  54 # Currently, dali-adaptor always requires EFL on all platforms.
  55 # (on Wayland & X11, on Tizen devices & Ubuntu PC).
  56 PKG_CHECK_MODULES(ECORE, ecore)
  57 PKG_CHECK_MODULES(ECORE_IPC, ecore-ipc)
  58 PKG_CHECK_MODULES(ECORE_IMF, [ecore-imf >= 1.13], [ecore_imf_1_13=yes], [ecore_imf_1_13=no])
  59 # Check for EldBus.h in ECore
  60 PKG_CHECK_MODULES(ELDBUS, eldbus, [ eldbus_available=yes ],  [ eldbus_available=no ] )
  61
  62 DALI_ELDBUS_AVAILABLE=
  63 if test "x$eldbus_available" = "xyes"; then
  64   DALI_ELDBUS_AVAILABLE=true
  65   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDALI_ELDBUS_AVAILABLE "
  66 fi
  67 AC_SUBST(DALI_ELDBUS_AVAILABLE)
  68
  69
  70 if test "x$enable_cxx03_abi" = "xyes"; then
  71 PKG_CHECK_MODULES(TPKP_CURL, tpkp-curl-deprecated, [ tpkp_curl_available=yes ], [ tpkp_curl_available=no ] )
  72 else
  73 PKG_CHECK_MODULES(TPKP_CURL, tpkp-curl, [ tpkp_curl_available=yes ], [ tpkp_curl_available=no ] )
  74 fi
  75
  76 if test "x$tpkp_curl_available" = "xyes"; then
  77   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DTPK_CURL_ENABLED "
  78 fi
  79
  80 PKG_CHECK_MODULES(UTILX, utilX, [ utilx_available=yes ], [ utilx_available=no ] )
  81
  82 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DPLATFORM_TIZEN"
  83
  84 AC_ARG_ENABLE(exportall,
  85               [AC_HELP_STRING([--enable-exportall],
  86                               [enables the exporting of all the symbols in the library])],
  87               [enable_exportall=yes],
  88               [enable_exportall=no])
  89
  90 AC_ARG_ENABLE([debug],
  91               [AC_HELP_STRING([--enable-debug],
  92                               [Turns on debugging])],
  93               [enable_debug=$enableval],
  94               [enable_debug=no])
  95
  96 AC_ARG_ENABLE(shaderbincache,
  97               [AC_HELP_STRING([--enable-shaderbincache],
  98                               [enables shader binary cache])],
  99               [enable_shaderbincache=$enableval],
 100               [enable_shaderbincache=DISABLE])
 101
 102 AC_ARG_ENABLE(networklogging,
 103               [AC_HELP_STRING([--enable-networklogging],
 104                               [enables network for debug tool])],
 105               [enable_networklogging=$enableval],
 106               [enable_networklogging=no])
 107
 108
 109 if test "x$enable_debug" = "xyes"; then
 110   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDEBUG_ENABLED"
 111 fi
 112
 113 if test "x$enable_debug" = "xno" -a "x$enable_exportall" = "xno"; then
 114   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -fvisibility=hidden -DHIDE_DALI_INTERNALS"
 115 fi
 116
 117 if test "x$enable_shaderbincache" = "xENABLE"; then
 118   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DSHADERBIN_CACHE_ENABLED"
 119 fi
 120
 121 if test "x$enable_networklogging" = "xyes"; then
 122   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DNETWORK_LOGGING_ENABLED"
 123 fi
 124
 125 # If Ecore IMF version is greater than 1.13, then some structures are different
 126 if test "x$ecore_imf_1_13" = "xyes"; then
 127   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DECORE_IMF_1_13"
 128 fi
 129
 130 AC_ARG_ENABLE([gles],
 131               [AC_HELP_STRING([--enable-gles],
 132                               [Specify the OpenGL ES version for backwards compatibility])],
 133               [enable_gles=$enableval],
 134               [enable_gles=20])
 135
 136 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDALI_GLES_VERSION=${enable_gles}"
 137
 138 # Currently, dali-adaptor requires appfw on Tizen
 139 # and does not require it on Ubuntu.
 140 # So we should be able to enable/disable this option for dali-adaptor.
 141 AC_ARG_ENABLE([appfw],
 142               [AC_HELP_STRING([--enable-appfw],
 143                               [Builds with Tizen App framework libraries, off by default])],
 144               [enable_appfw=$enableval],
 145               [enable_appfw=no])
 146
 147 # Option to allow building with Tizen SDK 2.2
 148 AC_ARG_WITH([tizen-2-2-compatibility],
 149             [AC_HELP_STRING([--with-tizen-2-2-compatibility],
 150                             [Use Tizen SDK 2.2 compatibility])],
 151             [with_tizen_2_2_compatibility=$withval],
 152             [with_tizen_2_2_compatibility=no])
 153
 154 # Tizen Profile options
 155 AC_ARG_ENABLE([profile],
 156               [AC_HELP_STRING([--enable-profile=COMMON,MOBILE,WEARABLE,TV,IVI,UBUNTU],
 157                             [Select the variant of tizen])],
 158               [enable_profile=$enableval],
 159               [enable_profile=UBUNTU])
 160
 161 # Tizen Major version
 162 AC_ARG_ENABLE([tizen-major-version],
 163               [AC_HELP_STRING([--enable-tizen-major-version],
 164                               [Specify the Tizen Major version for backwards compatibility])],
 165               [enable-tizen-major-version=$enableval],
 166               [enable-tizen-major-version=0])
 167
 168 # Ensure valid profile selected
 169 if test "x$enable_profile" != "xCOMMON" -a "x$enable_profile" != "xMOBILE" -a "x$enable_profile" != "xWEARABLE" -a "x$enable_profile" != "xTV" -a "x$enable_profile" != "xIVI" -a "x$enable_profile" != "xUBUNTU"; then
 170   AC_MSG_ERROR([$enable_profile is an invalid profile])
 171 fi
 172
 173 AC_ARG_ENABLE(wayland,
 174               [  --enable-wayland       Build on Wayland],
 175               enable_wayland=yes,
 176               enable_wayland=no)
 177
 178 AC_ARG_ENABLE([cxx03_abi],
 179               [AC_HELP_STRING([--enable-cxx03-abi],
 180                               [Specify abi for the build])],
 181               [enable_cxx03_abi=$enableval],
 182               [enable_cxx03_abi=no])
 183
 184 AC_ARG_ENABLE([rename_so],
 185               [AC_HELP_STRING([--enable-rename-so],
 186                               [Specify whether so file is renamed or not])],
 187               [enable_rename_so=$enableval],
 188               [enable_rename_so=yes])
 189
 190 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDALI_PROFILE_${enable_profile}"
 191 DALI_PROFILE_CFLAGS=" -DDALI_PROFILE_${enable_profile}"
 192 AM_CONDITIONAL([COMMON_PROFILE], [test x$enable_profile = xCOMMON])
 193 AM_CONDITIONAL([MOBILE_PROFILE], [test x$enable_profile = xMOBILE])
 194 AM_CONDITIONAL([WEARABLE_PROFILE], [test x$enable_profile = xWEARABLE])
 195 AM_CONDITIONAL([TV_PROFILE], [test x$enable_profile = xTV])
 196 AM_CONDITIONAL([IVI_PROFILE], [test x$enable_profile = xIVI])
 197 AM_CONDITIONAL([UBUNTU_PROFILE], [test x$enable_profile = xUBUNTU])
 198 AM_CONDITIONAL([WAYLAND], [test x$enable_wayland = xyes])
 199 AM_CONDITIONAL([USE_APPFW], [test x$enable_appfw = xyes])
 200 AM_CONDITIONAL([USE_APPFW_EFL_BASE], [test x$enable_tizen_major_version = x3])
 201 AM_CONDITIONAL([ENABLE_CXX03_ABI], [test x$enable_cxx03_abi = xyes])
 202 AM_CONDITIONAL([ENABLE_RENAME_SO], [test x$enable_rename_so = xyes])
 203
 204 # Platforms with highp shader support can use vector based text
 205 AM_CONDITIONAL([ENABLE_VECTOR_BASED_TEXT_RENDERING], [test x$enable_profile = xUBUNTU])
 206
 207 AM_CONDITIONAL([ENABLE_NETWORK_LOGGING], [test x$enable_networklogging = xyes])
 208
 209 # Platforms should either enable features or remove them, they
 210 # should not disable features. This allows the developer to override
 211 # features through the command line.
 212
 213 if test "x$enable_profile" = "xCOMMON"; then
 214 PKG_CHECK_MODULES(OPENGLES20, glesv2 egl)
 215 fi
 216
 217 if test "x$enable_profile" = "xMOBILE"; then
 218 PKG_CHECK_MODULES(OPENGLES20, glesv2 egl)
 219 enable_assimp=no
 220 fi
 221
 222 if test "x$enable_profile" = "xLITE"; then
 223 PKG_CHECK_MODULES(OPENGLES20, gles20)
 224 fi
 225
 226 if test "x$enable_cxx03_abi" = "xyes"; then
 227 PKG_CHECK_MODULES(DALICORE, dali-core-cxx03)
 228 else
 229 PKG_CHECK_MODULES(DALICORE, dali-core)
 230 fi
 231
 232 if test "x$enable_profile" = "xWEARABLE"; then
 233 PKG_CHECK_MODULES(OPENGLES20, glesv2)
 234 PKG_CHECK_MODULES(SCREENCONNECTORPROVIDER, screen_connector_provider)
 235 PKG_CHECK_MODULES(APPFW_WATCH, capi-appfw-watch-application,
 236    [watch_available=yes], [watch_available=no] )
 237 PKG_CHECK_MODULES(APPCORE_WATCH, appcore-watch)
 238 if test "x$watch_available" = "xyes"; then
 239   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DAPPCORE_WATCH_AVAILABLE"
 240 fi
 241 fi
 242
 243 if test "x$enable_profile" = "xTV"; then
 244 PKG_CHECK_MODULES(OPENGLES20, glesv2)
 245 fi
 246
 247 if test "x$enable_profile" = "xIVI"; then
 248 PKG_CHECK_MODULES(OPENGLES20, glesv2)
 249 fi
 250
 251 if test "x$enable_profile" = "xUBUNTU"; then
 252 PKG_CHECK_MODULES(OPENGLES20, glesv2 egl)
 253 else
 254
 255 if test "x$enable_cxx03_abi" = "xyes"; then
 256  DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -D_GLIBCXX_USE_CXX11_ABI=0"
 257 fi
 258
 259 PKG_CHECK_MODULES(DLOG, dlog)
 260 PKG_CHECK_MODULES(TTS, tts)
 261 PKG_CHECK_MODULES(VCONF, vconf)
 262
 263 if test "x$with_tizen_2_2_compatibility" = "xno"; then
 264 PKG_CHECK_MODULES(CAPI_SYSTEM_INFO, capi-system-info)
 265 PKG_CHECK_MODULES(CAPI_SYSTEM_SENSOR, capi-system-sensor, [ capi_system_sensor_support=yes ], [ capi_system_sensor_support=no ] )
 266
 267 if test "x$capi_system_sensor_support" = "xyes"; then
 268   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DCAPI_SYSTEM_SENSOR_SUPPORT"
 269 fi
 270
 271 fi
 272
 273 fi # ubuntu profile test
 274
 275 if test "x$enable_appfw" = "xyes"; then
 276 PKG_CHECK_MODULES(CAPI_SYSTEM_SYSTEM_SETTINGS, capi-system-system-settings)
 277 if test "x$enable_tizen_major_version" = "x3"; then
 278 PKG_CHECK_MODULES(CAPI_APPFW_APPLICATION, capi-appfw-application)
 279 PKG_CHECK_MODULES(ELEMENTARY, elementary)
 280 else
 281 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DWIDGET_AVAILABLE"
 282 PKG_CHECK_MODULES(BUNDLE, bundle)
 283 PKG_CHECK_MODULES(CAPI_APPFW_APPLICATION, appcore-ui)
 284 PKG_CHECK_MODULES(CAPI_APPFW_WIDGET_BASE, appcore-widget-base)
 285 PKG_CHECK_MODULES(CAPI_APPFW_COMMON, capi-appfw-app-common)
 286 PKG_CHECK_MODULES(CAPI_APPFW_CONTROL, capi-appfw-app-control)
 287 fi
 288 else
 289 PKG_CHECK_MODULES(ELEMENTARY, elementary)
 290 fi
 291
 292 # Using EFL api's for  WAYLAND AND X11 to run on ecore mainloop
 293 if test "x$enable_wayland" = "xyes"; then
 294 PKG_CHECK_MODULES(WAYLAND, [ecore-wayland egl wayland-egl wayland-client >= 1.2.0 xkbcommon libtbm],
 295                   [DALI_USE_ECORE_WAYLAND=1],
 296                   [DALI_USE_ECORE_WAYLAND=0])
 297
 298 else
 299 PKG_CHECK_MODULES(ECORE_X, [ecore-x],
 300                   [DALI_USE_ECORE_X11=1],
 301                   [DALI_USE_ECORE_X11=0])
 302 PKG_CHECK_MODULES(X11, [x11],
 303                   [DALI_USE_X11=1],
 304                   [DALI_USE_X11=0])
 305 fi
 306
 307 # remove this when we update common repos
 308 # common profile currently does not have wayland extensions like xdg-shell
 309 if test "x$enable_wayland" = "xyes"; then
 310 if test "x$enable_profile" != "xCOMMON"; then
 311 PKG_CHECK_MODULES(WAYLAND_EXTENSION, xdg-shell-client text-client input-method-client)
 312 fi
 313 fi
 314 AM_CONDITIONAL([USE_ECORE_WAYLAND], [test "$DALI_USE_ECORE_WAYLAND" -eq 1])
 315
 316 if test x$DALI_DATA_RW_DIR != x; then
 317   dataReadWriteDir=$DALI_DATA_RW_DIR
 318 else
 319   dataReadWriteDir=${prefix}/share/dali/
 320 fi
 321
 322 if test x$DALI_DATA_RO_DIR != x; then
 323   dataReadOnlyDir=$DALI_DATA_RO_DIR
 324 else
 325   dataReadOnlyDir=${prefix}/share/dali/
 326 fi
 327
 328 if test x$TIZEN_PLATFORM_CONFIG_SUPPORTED != x; then
 329   tizenPlatformConfigSupported=$TIZEN_PLATFORM_CONFIG_SUPPORTED
 330 else
 331   tizenPlatformConfigSupported=0
 332 fi
 333
 334 if test x$FONT_CONFIGURATION_FILE != x; then
 335   fontConfigurationFile=$FONT_CONFIGURATION_FILE
 336 fi
 337
 338 AC_SUBST(dataReadWriteDir)
 339 AC_SUBST(dataReadOnlyDir)
 340 AC_SUBST(DALI_ADAPTOR_CFLAGS)
 341 AC_SUBST(DALI_PROFILE_CFLAGS)
 342 AC_SUBST(fontConfigurationFile)
 343 AC_SUBST(tizenPlatformConfigSupported)
 344
 345 # Specify the include directory for development headers
 346 #devincludepath=${includedir}/dali/internal
 347 devincludepath=${includedir}
 348 AC_SUBST(devincludepath)
 349
 350 AC_CONFIG_FILES([Makefile])
 351
 352 if test "x$enable_cxx03_abi" = "xyes"; then
 353 AC_CONFIG_FILES([dali-adaptor-cxx03.pc dali-adaptor-integration-cxx03.pc])
 354 else
 355 AC_CONFIG_FILES([dali-adaptor.pc dali-adaptor-integration.pc])
 356 fi
 357
 358 if test "x$freetype_bitmap_support" = "xyes"; then
 359 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DFREETYPE_BITMAP_SUPPORT"
 360 fi
 361
 362 AC_OUTPUT
 363
 364
 365 echo "
 366 Configuration
 367 -------------
 368   Prefix:                           $prefix
 369   Debug Build:                      $enable_debug
 370   Compile flags:                    $DALI_ADAPTOR_CFLAGS
 371   Freetype bitmap support (Emoji):  $freetype_bitmap_support
 372   Profile:                          $enable_profile
 373   Data Dir (Read/Write):            $dataReadWriteDir
 374   Data Dir (Read Only):             $dataReadOnlyDir
 375   Tizen SDK 2.2 compatibility:      $with_tizen_2_2_compatibility
 376   EldBus:                           $eldbus_available
 377   Shader Binary Cache:              $enable_shaderbincache
 378   Ecore Version At Least 1.13.0     $ecore_imf_1_13
 379   Network logging enabled:          $enable_networklogging
 380   Font config file:                 $fontConfigurationFile
 381   Using Tizen APP FW libraries:     $enable_appfw
 382   OpenGL ES version:                $enable_gles
 383   Tizen Platform Config supported   $tizenPlatformConfigSupported
 384 "