build/tizen/adaptor/configure.ac

   1 #
   2 # Copyright (c) 2017 Samsung Electronics Co., Ltd.
   3 #
   4 # Licensed under the Apache License, Version 2.0 (the "License");
   5 # you may not use this file except in compliance with the License.
   6 # You may obtain a copy of the License at
   7 #
   8 # http://www.apache.org/licenses/LICENSE-2.0
   9 #
  10 # Unless required by applicable law or agreed to in writing, software
  11 # distributed under the License is distributed on an "AS IS" BASIS,
  12 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  13 # See the License for the specific language governing permissions and
  14 # limitations under the License.
  15 #
  16
  17 m4_define([dali_version],[0.1.0])
  18 AC_INIT([dali], [dali_version])
  19 AM_INIT_AUTOMAKE([-Wall foreign])
  20
  21 AC_CONFIG_MACRO_DIR([m4])
  22
  23 AC_PROG_CXX
  24 AC_PROG_LIBTOOL
  25 AC_PROG_MKDIR_P
  26
  27 m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
  28
  29 LT_INIT
  30
  31 DALI_ADAPTOR_VERSION=dali_version
  32 AC_SUBST(DALI_ADAPTOR_VERSION)
  33
  34 FREETYPE_REQUIRED=9.16.3
  35 # 17.1.11 = Freetype version 2.5.2
  36 FREETYPE_BITMAP_SUPPORT_VERSION=17.1.11
  37
  38 PKG_CHECK_MODULES(EXIF, libexif)
  39 PKG_CHECK_MODULES(FREETYPE, [freetype2 >= $FREETYPE_REQUIRED])
  40 PKG_CHECK_MODULES(FREETYPE_BITMAP_SUPPORT, [freetype2 >= $FREETYPE_BITMAP_SUPPORT_VERSION], [ freetype_bitmap_support=yes  ], [ freetype_bitmap_support=no ] )
  41 PKG_CHECK_MODULES(FONTCONFIG, fontconfig)
  42 PKG_CHECK_MODULES(PNG, libpng)
  43 PKG_CHECK_MODULES(LIBEXIF, libexif)
  44 PKG_CHECK_MODULES(LIBDRM, libdrm)
  45 PKG_CHECK_MODULES(LIBCURL, libcurl)
  46 PKG_CHECK_MODULES(HARFBUZZ, harfbuzz)
  47 PKG_CHECK_MODULES(FRIBIDI, fribidi)
  48 PKG_CHECK_MODULES(EVAS, evas)
  49 PKG_CHECK_MODULES(TTRACE,  ttrace, AC_DEFINE(ENABLE_TTRACE, 1, [ttrace available]),
  50                   [ AC_MSG_NOTICE([Tizen Trace not avaiable]) ]
  51                   )
  52
  53 # Currently, dali-adaptor always requires EFL on all platforms.
  54 # (on Wayland & X11, on Tizen devices & Ubuntu PC).
  55 PKG_CHECK_MODULES(ECORE, ecore)
  56 PKG_CHECK_MODULES(ECORE_IPC, ecore-ipc)
  57 PKG_CHECK_MODULES(ECORE_IMF, [ecore-imf >= 1.13], [ecore_imf_1_13=yes], [ecore_imf_1_13=no])
  58 # Check for EldBus.h in ECore
  59 PKG_CHECK_MODULES(ELDBUS, eldbus, [ eldbus_available=yes ],  [ eldbus_available=no ] )
  60
  61 DALI_ELDBUS_AVAILABLE=
  62 if test "x$eldbus_available" = "xyes"; then
  63   DALI_ELDBUS_AVAILABLE=true
  64   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDALI_ELDBUS_AVAILABLE "
  65 fi
  66 AC_SUBST(DALI_ELDBUS_AVAILABLE)
  67
  68
  69 if test "x$enable_cxx03_abi" = "xyes"; then
  70 PKG_CHECK_MODULES(TPKP_CURL, tpkp-curl-deprecated, [ tpkp_curl_available=yes ], [ tpkp_curl_available=no ] )
  71 else
  72 PKG_CHECK_MODULES(TPKP_CURL, tpkp-curl, [ tpkp_curl_available=yes ], [ tpkp_curl_available=no ] )
  73 fi
  74
  75 if test "x$tpkp_curl_available" = "xyes"; then
  76   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DTPK_CURL_ENABLED "
  77 fi
  78
  79 PKG_CHECK_MODULES(UTILX, utilX, [ utilx_available=yes ], [ utilx_available=no ] )
  80
  81 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DPLATFORM_TIZEN"
  82
  83 AC_ARG_ENABLE(exportall,
  84               [AC_HELP_STRING([--enable-exportall],
  85                               [enables the exporting of all the symbols in the library])],
  86               [enable_exportall=yes],
  87               [enable_exportall=no])
  88
  89 AC_ARG_ENABLE([debug],
  90               [AC_HELP_STRING([--enable-debug],
  91                               [Turns on debugging])],
  92               [enable_debug=$enableval],
  93               [enable_debug=no])
  94
  95 AC_ARG_ENABLE(shaderbincache,
  96               [AC_HELP_STRING([--enable-shaderbincache],
  97                               [enables shader binary cache])],
  98               [enable_shaderbincache=$enableval],
  99               [enable_shaderbincache=DISABLE])
 100
 101 AC_ARG_ENABLE(networklogging,
 102               [AC_HELP_STRING([--enable-networklogging],
 103                               [enables network for debug tool])],
 104               [enable_networklogging=$enableval],
 105               [enable_networklogging=no])
 106
 107
 108 if test "x$enable_debug" = "xyes"; then
 109   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDEBUG_ENABLED"
 110 fi
 111
 112 if test "x$enable_debug" = "xno" -a "x$enable_exportall" = "xno"; then
 113   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -fvisibility=hidden -DHIDE_DALI_INTERNALS"
 114 fi
 115
 116 if test "x$enable_shaderbincache" = "xENABLE"; then
 117   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DSHADERBIN_CACHE_ENABLED"
 118 fi
 119
 120 if test "x$enable_networklogging" = "xyes"; then
 121   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DNETWORK_LOGGING_ENABLED"
 122 fi
 123
 124 # If Ecore IMF version is greater than 1.13, then some structures are different
 125 if test "x$ecore_imf_1_13" = "xyes"; then
 126   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DECORE_IMF_1_13"
 127 fi
 128
 129 AC_ARG_ENABLE([gles],
 130               [AC_HELP_STRING([--enable-gles],
 131                               [Specify the OpenGL ES version for backwards compatibility])],
 132               [enable_gles=$enableval],
 133               [enable_gles=20])
 134
 135 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDALI_GLES_VERSION=${enable_gles}"
 136
 137 # Currently, dali-adaptor requires appfw on Tizen
 138 # and does not require it on Ubuntu.
 139 # So we should be able to enable/disable this option for dali-adaptor.
 140 AC_ARG_ENABLE([appfw],
 141               [AC_HELP_STRING([--enable-appfw],
 142                               [Builds with Tizen App framework libraries, off by default])],
 143               [enable_appfw=$enableval],
 144               [enable_appfw=no])
 145
 146 # Option to allow building with Tizen SDK 2.2
 147 AC_ARG_WITH([tizen-2-2-compatibility],
 148             [AC_HELP_STRING([--with-tizen-2-2-compatibility],
 149                             [Use Tizen SDK 2.2 compatibility])],
 150             [with_tizen_2_2_compatibility=$withval],
 151             [with_tizen_2_2_compatibility=no])
 152
 153 # Tizen Profile options
 154 AC_ARG_ENABLE([profile],
 155               [AC_HELP_STRING([--enable-profile=COMMON,MOBILE,WEARABLE,TV,IVI,UBUNTU],
 156                             [Select the variant of tizen])],
 157               [enable_profile=$enableval],
 158               [enable_profile=UBUNTU])
 159
 160 # Tizen Major version
 161 AC_ARG_ENABLE([tizen-major-version],
 162               [AC_HELP_STRING([--enable-tizen-major-version],
 163                               [Specify the Tizen Major version for backwards compatibility])],
 164               [enable-tizen-major-version=$enableval],
 165               [enable-tizen-major-version=0])
 166
 167 # Ensure valid profile selected
 168 if test "x$enable_profile" != "xCOMMON" -a "x$enable_profile" != "xMOBILE" -a "x$enable_profile" != "xWEARABLE" -a "x$enable_profile" != "xTV" -a "x$enable_profile" != "xIVI" -a "x$enable_profile" != "xUBUNTU"; then
 169   AC_MSG_ERROR([$enable_profile is an invalid profile])
 170 fi
 171
 172 AC_ARG_ENABLE(wayland,
 173               [  --enable-wayland       Build on Wayland],
 174               enable_wayland=yes,
 175               enable_wayland=no)
 176
 177 AC_ARG_ENABLE([cxx03_abi],
 178               [AC_HELP_STRING([--enable-cxx03-abi],
 179                               [Specify abi for the build])],
 180               [enable_cxx03_abi=$enableval],
 181               [enable_cxx03_abi=no])
 182
 183 AC_ARG_ENABLE([rename_so],
 184               [AC_HELP_STRING([--enable-rename-so],
 185                               [Specify whether so file is renamed or not])],
 186               [enable_rename_so=$enableval],
 187               [enable_rename_so=yes])
 188
 189 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDALI_PROFILE_${enable_profile}"
 190 DALI_PROFILE_CFLAGS=" -DDALI_PROFILE_${enable_profile}"
 191 AM_CONDITIONAL([COMMON_PROFILE], [test x$enable_profile = xCOMMON])
 192 AM_CONDITIONAL([MOBILE_PROFILE], [test x$enable_profile = xMOBILE])
 193 AM_CONDITIONAL([WEARABLE_PROFILE], [test x$enable_profile = xWEARABLE])
 194 AM_CONDITIONAL([TV_PROFILE], [test x$enable_profile = xTV])
 195 AM_CONDITIONAL([IVI_PROFILE], [test x$enable_profile = xIVI])
 196 AM_CONDITIONAL([UBUNTU_PROFILE], [test x$enable_profile = xUBUNTU])
 197 AM_CONDITIONAL([WAYLAND], [test x$enable_wayland = xyes])
 198 AM_CONDITIONAL([USE_APPFW], [test x$enable_appfw = xyes])
 199 AM_CONDITIONAL([USE_APPFW_EFL_BASE], [test x$enable_tizen_major_version = x3])
 200 AM_CONDITIONAL([ENABLE_CXX03_ABI], [test x$enable_cxx03_abi = xyes])
 201 AM_CONDITIONAL([ENABLE_RENAME_SO], [test x$enable_rename_so = xyes])
 202
 203 # Platforms with highp shader support can use vector based text
 204 AM_CONDITIONAL([ENABLE_VECTOR_BASED_TEXT_RENDERING], [test x$enable_profile = xUBUNTU])
 205
 206 AM_CONDITIONAL([ENABLE_NETWORK_LOGGING], [test x$enable_networklogging = xyes])
 207
 208 # Platforms should either enable features or remove them, they
 209 # should not disable features. This allows the developer to override
 210 # features through the command line.
 211
 212 if test "x$enable_profile" = "xCOMMON"; then
 213 PKG_CHECK_MODULES(OPENGLES20, glesv2 egl)
 214 fi
 215
 216 if test "x$enable_profile" = "xMOBILE"; then
 217 PKG_CHECK_MODULES(OPENGLES20, glesv2 egl)
 218 enable_assimp=no
 219 fi
 220
 221 if test "x$enable_profile" = "xLITE"; then
 222 PKG_CHECK_MODULES(OPENGLES20, gles20)
 223 fi
 224
 225 if test "x$enable_cxx03_abi" = "xyes"; then
 226 PKG_CHECK_MODULES(DALICORE, dali-core-cxx03)
 227 else
 228 PKG_CHECK_MODULES(DALICORE, dali-core)
 229 fi
 230
 231 if test "x$enable_profile" = "xWEARABLE"; then
 232 PKG_CHECK_MODULES(OPENGLES20, glesv2)
 233 PKG_CHECK_MODULES(SCREENCONNECTORPROVIDER, screen_connector_provider)
 234 PKG_CHECK_MODULES(APPFW_WATCH, capi-appfw-watch-application,
 235    [watch_available=yes], [watch_available=no] )
 236 PKG_CHECK_MODULES(APPCORE_WATCH, appcore-watch)
 237 if test "x$watch_available" = "xyes"; then
 238   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DAPPCORE_WATCH_AVAILABLE"
 239 fi
 240 fi
 241
 242 if test "x$enable_profile" = "xTV"; then
 243 PKG_CHECK_MODULES(OPENGLES20, glesv2)
 244 fi
 245
 246 if test "x$enable_profile" = "xIVI"; then
 247 PKG_CHECK_MODULES(OPENGLES20, glesv2)
 248 fi
 249
 250 if test "x$enable_profile" = "xUBUNTU"; then
 251 PKG_CHECK_MODULES(OPENGLES20, glesv2 egl)
 252 else
 253
 254 if test "x$enable_cxx03_abi" = "xyes"; then
 255  DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -D_GLIBCXX_USE_CXX11_ABI=0"
 256 fi
 257
 258 PKG_CHECK_MODULES(DLOG, dlog)
 259 PKG_CHECK_MODULES(TTS, tts)
 260 PKG_CHECK_MODULES(VCONF, vconf)
 261
 262 if test "x$with_tizen_2_2_compatibility" = "xno"; then
 263 PKG_CHECK_MODULES(CAPI_SYSTEM_INFO, capi-system-info)
 264 PKG_CHECK_MODULES(CAPI_SYSTEM_SENSOR, capi-system-sensor, [ capi_system_sensor_support=yes ], [ capi_system_sensor_support=no ] )
 265
 266 if test "x$capi_system_sensor_support" = "xyes"; then
 267   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DCAPI_SYSTEM_SENSOR_SUPPORT"
 268 fi
 269
 270 fi
 271
 272 fi # ubuntu profile test
 273
 274 if test "x$enable_appfw" = "xyes"; then
 275 PKG_CHECK_MODULES(CAPI_SYSTEM_SYSTEM_SETTINGS, capi-system-system-settings)
 276 if test "x$enable_tizen_major_version" = "x3"; then
 277 PKG_CHECK_MODULES(CAPI_APPFW_APPLICATION, capi-appfw-application)
 278 PKG_CHECK_MODULES(ELEMENTARY, elementary)
 279 else
 280 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DWIDGET_AVAILABLE"
 281 PKG_CHECK_MODULES(BUNDLE, bundle)
 282 PKG_CHECK_MODULES(CAPI_APPFW_APPLICATION, appcore-ui)
 283 PKG_CHECK_MODULES(CAPI_APPFW_WIDGET_BASE, appcore-widget-base)
 284 PKG_CHECK_MODULES(CAPI_APPFW_COMMON, capi-appfw-app-common)
 285 PKG_CHECK_MODULES(CAPI_APPFW_CONTROL, capi-appfw-app-control)
 286 fi
 287 else
 288 PKG_CHECK_MODULES(ELEMENTARY, elementary)
 289 fi
 290
 291 # Using EFL api's for  WAYLAND AND X11 to run on ecore mainloop
 292 if test "x$enable_wayland" = "xyes"; then
 293 PKG_CHECK_MODULES(WAYLAND, [ecore-wayland egl wayland-egl wayland-client >= 1.2.0 xkbcommon libtbm],
 294                   [DALI_USE_ECORE_WAYLAND=1],
 295                   [DALI_USE_ECORE_WAYLAND=0])
 296
 297 else
 298 PKG_CHECK_MODULES(ECORE_X, [ecore-x],
 299                   [DALI_USE_ECORE_X11=1],
 300                   [DALI_USE_ECORE_X11=0])
 301 PKG_CHECK_MODULES(X11, [x11],
 302                   [DALI_USE_X11=1],
 303                   [DALI_USE_X11=0])
 304 fi
 305
 306 # remove this when we update common repos
 307 # common profile currently does not have wayland extensions like xdg-shell
 308 if test "x$enable_wayland" = "xyes"; then
 309 if test "x$enable_profile" != "xCOMMON"; then
 310 PKG_CHECK_MODULES(WAYLAND_EXTENSION, xdg-shell-client text-client input-method-client)
 311 fi
 312 fi
 313 AM_CONDITIONAL([USE_ECORE_WAYLAND], [test "$DALI_USE_ECORE_WAYLAND" -eq 1])
 314
 315 if test x$DALI_DATA_RW_DIR != x; then
 316   dataReadWriteDir=$DALI_DATA_RW_DIR
 317 else
 318   dataReadWriteDir=${prefix}/share/dali/
 319 fi
 320
 321 if test x$DALI_DATA_RO_DIR != x; then
 322   dataReadOnlyDir=$DALI_DATA_RO_DIR
 323 else
 324   dataReadOnlyDir=${prefix}/share/dali/
 325 fi
 326
 327 if test x$TIZEN_PLATFORM_CONFIG_SUPPORTED != x; then
 328   tizenPlatformConfigSupported=$TIZEN_PLATFORM_CONFIG_SUPPORTED
 329 else
 330   tizenPlatformConfigSupported=0
 331 fi
 332
 333 if test x$FONT_CONFIGURATION_FILE != x; then
 334   fontConfigurationFile=$FONT_CONFIGURATION_FILE
 335 fi
 336
 337 AC_SUBST(dataReadWriteDir)
 338 AC_SUBST(dataReadOnlyDir)
 339 AC_SUBST(DALI_ADAPTOR_CFLAGS)
 340 AC_SUBST(DALI_PROFILE_CFLAGS)
 341 AC_SUBST(fontConfigurationFile)
 342 AC_SUBST(tizenPlatformConfigSupported)
 343
 344 # Specify the include directory for development headers
 345 #devincludepath=${includedir}/dali/internal
 346 devincludepath=${includedir}
 347 AC_SUBST(devincludepath)
 348
 349 AC_CONFIG_FILES([Makefile])
 350
 351 if test "x$enable_cxx03_abi" = "xyes"; then
 352 AC_CONFIG_FILES([dali-adaptor-cxx03.pc dali-adaptor-integration-cxx03.pc])
 353 else
 354 AC_CONFIG_FILES([dali-adaptor.pc dali-adaptor-integration.pc])
 355 fi
 356
 357 if test "x$freetype_bitmap_support" = "xyes"; then
 358 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DFREETYPE_BITMAP_SUPPORT"
 359 fi
 360
 361 AC_OUTPUT
 362
 363
 364 echo "
 365 Configuration
 366 -------------
 367   Prefix:                           $prefix
 368   Debug Build:                      $enable_debug
 369   Compile flags:                    $DALI_ADAPTOR_CFLAGS
 370   Freetype bitmap support (Emoji):  $freetype_bitmap_support
 371   Profile:                          $enable_profile
 372   Data Dir (Read/Write):            $dataReadWriteDir
 373   Data Dir (Read Only):             $dataReadOnlyDir
 374   Tizen SDK 2.2 compatibility:      $with_tizen_2_2_compatibility
 375   EldBus:                           $eldbus_available
 376   Shader Binary Cache:              $enable_shaderbincache
 377   Ecore Version At Least 1.13.0     $ecore_imf_1_13
 378   Network logging enabled:          $enable_networklogging
 379   Font config file:                 $fontConfigurationFile
 380   Using Tizen APP FW libraries:     $enable_appfw
 381   OpenGL ES version:                $enable_gles
 382   Tizen Platform Config supported   $tizenPlatformConfigSupported
 383 "