build/tizen/adaptor/configure.ac

   1 #
   2 # Copyright (c) 2018 Samsung Electronics Co., Ltd.
   3 #
   4 # Licensed under the Apache License, Version 2.0 (the "License");
   5 # you may not use this file except in compliance with the License.
   6 # You may obtain a copy of the License at
   7 #
   8 # http://www.apache.org/licenses/LICENSE-2.0
   9 #
  10 # Unless required by applicable law or agreed to in writing, software
  11 # distributed under the License is distributed on an "AS IS" BASIS,
  12 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  13 # See the License for the specific language governing permissions and
  14 # limitations under the License.
  15 #
  16
  17 m4_define([dali_version],[0.1.0])
  18 AC_INIT([dali], [dali_version])
  19 AM_INIT_AUTOMAKE([-Wall foreign])
  20 AC_CONFIG_MACRO_DIR([m4])
  21
  22 AC_PROG_CXX
  23 AC_PROG_LIBTOOL
  24 AC_PROG_MKDIR_P
  25
  26 AM_CONDITIONAL(DEADCODE, [no])
  27
  28 m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
  29
  30 LT_INIT
  31
  32 DALI_ADAPTOR_VERSION=dali_version
  33 AC_SUBST(DALI_ADAPTOR_VERSION)
  34
  35 FREETYPE_REQUIRED=9.16.3
  36 # 17.1.11 = Freetype version 2.5.2
  37 FREETYPE_BITMAP_SUPPORT_VERSION=17.1.11
  38
  39 PKG_CHECK_MODULES(EXIF, libexif)
  40 PKG_CHECK_MODULES(FREETYPE, [freetype2 >= $FREETYPE_REQUIRED])
  41 PKG_CHECK_MODULES(FREETYPE_BITMAP_SUPPORT, [freetype2 >= $FREETYPE_BITMAP_SUPPORT_VERSION], [ freetype_bitmap_support=yes  ], [ freetype_bitmap_support=no ] )
  42 PKG_CHECK_MODULES(FONTCONFIG, fontconfig)
  43 PKG_CHECK_MODULES(PNG, libpng)
  44 PKG_CHECK_MODULES(LIBEXIF, libexif)
  45 PKG_CHECK_MODULES(LIBDRM, libdrm)
  46 PKG_CHECK_MODULES(LIBCURL, libcurl)
  47 PKG_CHECK_MODULES(LIBCRYPTO, libcrypto)
  48 PKG_CHECK_MODULES(HARFBUZZ, harfbuzz)
  49 PKG_CHECK_MODULES(FRIBIDI, fribidi)
  50 PKG_CHECK_MODULES(CAIRO, cairo)
  51 PKG_CHECK_MODULES(EVAS, evas)
  52 PKG_CHECK_MODULES(TTRACE,  ttrace, AC_DEFINE(ENABLE_TTRACE, 1, [ttrace available]),
  53                   [ AC_MSG_NOTICE([Tizen Trace not avaiable]) ]
  54                   )
  55
  56 # Currently, dali-adaptor always requires EFL on all platforms.
  57 # (on Wayland & X11, on Tizen devices & Ubuntu PC).
  58 PKG_CHECK_MODULES(ECORE, ecore)
  59 PKG_CHECK_MODULES(ECORE_IPC, ecore-ipc)
  60 PKG_CHECK_MODULES(ECORE_IMF, [ecore-imf >= 1.13], [ecore_imf_1_13=yes], [ecore_imf_1_13=no])
  61 # Check for EldBus.h in ECore
  62 PKG_CHECK_MODULES(ELDBUS, eldbus, [ eldbus_available=yes ],  [ eldbus_available=no ] )
  63
  64 DALI_ELDBUS_AVAILABLE=
  65 if test "x$eldbus_available" = "xyes"; then
  66   DALI_ELDBUS_AVAILABLE=true
  67   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDALI_ELDBUS_AVAILABLE "
  68 fi
  69 AC_SUBST(DALI_ELDBUS_AVAILABLE)
  70
  71
  72 if test "x$enable_cxx03_abi" = "xyes"; then
  73 PKG_CHECK_MODULES(TPKP_CURL, tpkp-curl-deprecated, [ tpkp_curl_available=yes ], [ tpkp_curl_available=no ] )
  74 else
  75 PKG_CHECK_MODULES(TPKP_CURL, tpkp-curl, [ tpkp_curl_available=yes ], [ tpkp_curl_available=no ] )
  76 fi
  77
  78 if test "x$tpkp_curl_available" = "xyes"; then
  79   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DTPK_CURL_ENABLED "
  80 fi
  81
  82 PKG_CHECK_MODULES(UTILX, utilX, [ utilx_available=yes ], [ utilx_available=no ] )
  83
  84 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DPLATFORM_TIZEN"
  85
  86 AC_ARG_ENABLE(exportall,
  87               [AC_HELP_STRING([--enable-exportall],
  88                               [enables the exporting of all the symbols in the library])],
  89               [enable_exportall=yes],
  90               [enable_exportall=no])
  91
  92 AC_ARG_ENABLE([debug],
  93               [AC_HELP_STRING([--enable-debug],
  94                               [Turns on debugging])],
  95               [enable_debug=$enableval],
  96               [enable_debug=no])
  97
  98 AC_ARG_ENABLE(shaderbincache,
  99               [AC_HELP_STRING([--enable-shaderbincache],
 100                               [enables shader binary cache])],
 101               [enable_shaderbincache=$enableval],
 102               [enable_shaderbincache=DISABLE])
 103
 104 AC_ARG_ENABLE(networklogging,
 105               [AC_HELP_STRING([--enable-networklogging],
 106                               [enables network for debug tool])],
 107               [enable_networklogging=$enableval],
 108               [enable_networklogging=no])
 109
 110
 111 if test "x$enable_debug" = "xyes"; then
 112   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDEBUG_ENABLED"
 113 fi
 114
 115 if test "x$enable_trace" = "xyes"; then
 116   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DTRACE_ENABLED"
 117 fi
 118
 119 if test "x$enable_debug" = "xno" -a "x$enable_exportall" = "xno"; then
 120   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -fvisibility=hidden -DHIDE_DALI_INTERNALS"
 121 fi
 122
 123 if test "x$enable_shaderbincache" = "xENABLE"; then
 124   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DSHADERBIN_CACHE_ENABLED"
 125 fi
 126
 127 if test "x$enable_networklogging" = "xyes"; then
 128   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DNETWORK_LOGGING_ENABLED"
 129 fi
 130
 131 # If Ecore IMF version is greater than 1.13, then some structures are different
 132 if test "x$ecore_imf_1_13" = "xyes"; then
 133   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DECORE_IMF_1_13"
 134 fi
 135
 136 # Currently, dali-adaptor requires appfw on Tizen
 137 # and does not require it on Ubuntu.
 138 # So we should be able to enable/disable this option for dali-adaptor.
 139 AC_ARG_ENABLE([appfw],
 140               [AC_HELP_STRING([--enable-appfw],
 141                               [Builds with Tizen App framework libraries, off by default])],
 142               [enable_appfw=$enableval],
 143               [enable_appfw=no])
 144
 145 # Option to allow building with Tizen SDK 2.2
 146 AC_ARG_WITH([tizen-2-2-compatibility],
 147             [AC_HELP_STRING([--with-tizen-2-2-compatibility],
 148                             [Use Tizen SDK 2.2 compatibility])],
 149             [with_tizen_2_2_compatibility=$withval],
 150             [with_tizen_2_2_compatibility=no])
 151
 152 # Tizen Profile options
 153 AC_ARG_ENABLE([profile],
 154               [AC_HELP_STRING([--enable-profile=COMMON,MOBILE,WEARABLE,TV,IVI,UBUNTU],
 155                             [Select the variant of tizen])],
 156               [enable_profile=$enableval],
 157               [enable_profile=UBUNTU])
 158
 159 # Tizen Major version
 160 AC_ARG_ENABLE([tizen-major-version],
 161               [AC_HELP_STRING([--enable-tizen-major-version],
 162                               [Specify the Tizen Major version for backwards compatibility])],
 163               [enable-tizen-major-version=$enableval],
 164               [enable-tizen-major-version=0])
 165
 166 # Ensure valid profile selected
 167 if test "x$enable_profile" != "xCOMMON" -a "x$enable_profile" != "xMOBILE" -a "x$enable_profile" != "xWEARABLE" -a "x$enable_profile" != "xTV" -a "x$enable_profile" != "xIVI" -a "x$enable_profile" != "xUBUNTU"; then
 168   AC_MSG_ERROR([$enable_profile is an invalid profile])
 169 fi
 170
 171 AC_ARG_ENABLE(wayland,
 172               [  --enable-wayland       Build on Wayland],
 173               enable_wayland=yes,
 174               enable_wayland=no)
 175
 176 AC_ARG_ENABLE(ecore_wayland2,
 177               [  --enable-ecore-wayland2  Build on Ecore Wayland2],
 178               enable_ecore_wayland2=yes,
 179               enable_ecore_wayland2=no)
 180
 181 AC_ARG_ENABLE([cxx03_abi],
 182               [AC_HELP_STRING([--enable-cxx03-abi],
 183                               [Specify abi for the build])],
 184               [enable_cxx03_abi=$enableval],
 185               [enable_cxx03_abi=no])
 186
 187 AC_ARG_ENABLE([rename_so],
 188               [AC_HELP_STRING([--enable-rename-so],
 189                               [Specify whether so file is renamed or not])],
 190               [enable_rename_so=$enableval],
 191               [enable_rename_so=yes])
 192
 193 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDALI_PROFILE_${enable_profile}"
 194 DALI_PROFILE_CFLAGS=" -DDALI_PROFILE_${enable_profile}"
 195 AM_CONDITIONAL([COMMON_PROFILE], [test x$enable_profile = xCOMMON])
 196 AM_CONDITIONAL([MOBILE_PROFILE], [test x$enable_profile = xMOBILE])
 197 AM_CONDITIONAL([WEARABLE_PROFILE], [test x$enable_profile = xWEARABLE])
 198 AM_CONDITIONAL([TV_PROFILE], [test x$enable_profile = xTV])
 199 AM_CONDITIONAL([IVI_PROFILE], [test x$enable_profile = xIVI])
 200 AM_CONDITIONAL([UBUNTU_PROFILE], [test x$enable_profile = xUBUNTU])
 201 AM_CONDITIONAL([WAYLAND], [test x$enable_wayland = xyes])
 202 AM_CONDITIONAL([ECORE_WAYLAND2], [test x$enable_ecore_wayland2 = xyes])
 203 AM_CONDITIONAL([USE_APPFW], [test x$enable_appfw = xyes])
 204 AM_CONDITIONAL([ENABLE_CXX03_ABI], [test x$enable_cxx03_abi = xyes])
 205 AM_CONDITIONAL([ENABLE_RENAME_SO], [test x$enable_rename_so = xyes])
 206
 207 # Platforms with highp shader support can use vector based text
 208 AM_CONDITIONAL([ENABLE_VECTOR_BASED_TEXT_RENDERING], [test x$enable_profile = xUBUNTU])
 209
 210 AM_CONDITIONAL([ENABLE_NETWORK_LOGGING], [test x$enable_networklogging = xyes])
 211
 212 AM_CONDITIONAL([ENABLE_TRACE], [test x$enable_trace = xyes])
 213
 214 # Platforms should either enable features or remove them, they
 215 # should not disable features. This allows the developer to override
 216 # features through the command line.
 217
 218 if test "x$enable_profile" = "xCOMMON"; then
 219 PKG_CHECK_MODULES(OPENGLES20, glesv2 egl)
 220 fi
 221
 222 if test "x$enable_profile" = "xMOBILE"; then
 223 PKG_CHECK_MODULES(OPENGLES20, glesv2 egl)
 224 enable_assimp=no
 225 fi
 226
 227 if test "x$enable_profile" = "xLITE"; then
 228 PKG_CHECK_MODULES(OPENGLES20, gles20)
 229 fi
 230
 231 if test "x$enable_cxx03_abi" = "xyes"; then
 232 PKG_CHECK_MODULES(DALICORE, dali-core-cxx03)
 233 else
 234 PKG_CHECK_MODULES(DALICORE, dali-core)
 235 fi
 236
 237 if test "x$enable_profile" = "xWEARABLE"; then
 238 PKG_CHECK_MODULES(OPENGLES20, glesv2)
 239 PKG_CHECK_MODULES(SCREENCONNECTORPROVIDER, screen_connector_provider)
 240 PKG_CHECK_MODULES(APPFW_WATCH, capi-appfw-watch-application,
 241    [watch_available=yes], [watch_available=no] )
 242 PKG_CHECK_MODULES(APPCORE_WATCH, appcore-watch)
 243 if test "x$watch_available" = "xyes"; then
 244   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DAPPCORE_WATCH_AVAILABLE"
 245 fi
 246 fi
 247
 248 if test "x$enable_profile" = "xTV"; then
 249 PKG_CHECK_MODULES(OPENGLES20, glesv2)
 250 fi
 251
 252 if test "x$enable_profile" = "xIVI"; then
 253 PKG_CHECK_MODULES(OPENGLES20, glesv2)
 254 fi
 255
 256 if test "x$enable_profile" = "xUBUNTU"; then
 257 PKG_CHECK_MODULES(OPENGLES20, glesv2 egl)
 258 else
 259
 260 if test "x$enable_cxx03_abi" = "xyes"; then
 261  DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -D_GLIBCXX_USE_CXX11_ABI=0"
 262 fi
 263
 264 PKG_CHECK_MODULES(DLOG, dlog)
 265 PKG_CHECK_MODULES(TTS, tts)
 266 PKG_CHECK_MODULES(VCONF, vconf)
 267
 268 if test "x$with_tizen_2_2_compatibility" = "xno"; then
 269 PKG_CHECK_MODULES(CAPI_SYSTEM_INFO, capi-system-info)
 270 PKG_CHECK_MODULES(CAPI_SYSTEM_SENSOR, capi-system-sensor, [ capi_system_sensor_support=yes ], [ capi_system_sensor_support=no ] )
 271
 272 if test "x$capi_system_sensor_support" = "xyes"; then
 273   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DCAPI_SYSTEM_SENSOR_SUPPORT"
 274 fi
 275
 276 fi
 277
 278 fi # ubuntu profile test
 279
 280 if test "x$enable_appfw" = "xyes"; then
 281 PKG_CHECK_MODULES(CAPI_SYSTEM_SYSTEM_SETTINGS, capi-system-system-settings)
 282 if test "x$enable_tizen_major_version" = "x3"; then
 283 PKG_CHECK_MODULES(CAPI_APPFW_APPLICATION, capi-appfw-application)
 284 PKG_CHECK_MODULES(ELEMENTARY, elementary)
 285 else
 286 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DWIDGET_AVAILABLE"
 287 PKG_CHECK_MODULES(BUNDLE, bundle)
 288 PKG_CHECK_MODULES(CAPI_APPFW_APPLICATION, appcore-ui)
 289 PKG_CHECK_MODULES(CAPI_APPFW_WIDGET_BASE, appcore-widget-base)
 290 PKG_CHECK_MODULES(CAPI_APPFW_COMMON, capi-appfw-app-common)
 291 PKG_CHECK_MODULES(CAPI_APPFW_CONTROL, capi-appfw-app-control)
 292 fi
 293 else
 294 PKG_CHECK_MODULES(ELEMENTARY, elementary)
 295 fi
 296
 297 # Using EFL api's for  WAYLAND AND X11 to run on ecore mainloop
 298 if test "x$enable_wayland" = "xyes"; then
 299
 300 if test "x$enable_ecore_wayland2" = "xyes"; then
 301 PKG_CHECK_MODULES(WAYLAND, [ecore-wl2 egl wayland-egl wayland-egl-tizen wayland-client >= 1.2.0 xkbcommon libtbm])
 302 else
 303 PKG_CHECK_MODULES(WAYLAND, [ecore-wayland egl wayland-egl wayland-client >= 1.2.0 xkbcommon libtbm])
 304 fi
 305
 306 else
 307 PKG_CHECK_MODULES(ECORE_X, [ecore-x],
 308                   [DALI_USE_ECORE_X11=1],
 309                   [DALI_USE_ECORE_X11=0])
 310 PKG_CHECK_MODULES(X11, [x11],
 311                   [DALI_USE_X11=1],
 312                   [DALI_USE_X11=0])
 313 fi
 314
 315 # remove this when we update common repos
 316 # common profile currently does not have wayland extensions like xdg-shell
 317 if test "x$enable_wayland" = "xyes"; then
 318 if test "x$enable_profile" != "xCOMMON"; then
 319 PKG_CHECK_MODULES(WAYLAND_EXTENSION, xdg-shell-client text-client input-method-client)
 320 fi
 321 fi
 322
 323 if test x$DALI_DATA_RW_DIR != x; then
 324   dataReadWriteDir=$DALI_DATA_RW_DIR
 325 else
 326   dataReadWriteDir=${prefix}/share/dali/
 327 fi
 328
 329 if test x$DALI_DATA_RO_DIR != x; then
 330   dataReadOnlyDir=$DALI_DATA_RO_DIR
 331 else
 332   dataReadOnlyDir=${prefix}/share/dali/
 333 fi
 334
 335 if test x$TIZEN_PLATFORM_CONFIG_SUPPORTED != x; then
 336   tizenPlatformConfigSupported=$TIZEN_PLATFORM_CONFIG_SUPPORTED
 337 else
 338   tizenPlatformConfigSupported=0
 339 fi
 340
 341 if test x$FONT_CONFIGURATION_FILE != x; then
 342   fontConfigurationFile=$FONT_CONFIGURATION_FILE
 343 fi
 344
 345 AC_SUBST(dataReadWriteDir)
 346 AC_SUBST(dataReadOnlyDir)
 347 AC_SUBST(DALI_ADAPTOR_CFLAGS)
 348 AC_SUBST(DALI_PROFILE_CFLAGS)
 349 AC_SUBST(fontConfigurationFile)
 350 AC_SUBST(tizenPlatformConfigSupported)
 351
 352 # Specify the include directory for development headers
 353 #devincludepath=${includedir}/dali/internal
 354 devincludepath=${includedir}
 355 AC_SUBST(devincludepath)
 356
 357 AC_CONFIG_FILES([Makefile])
 358
 359 if test "x$enable_cxx03_abi" = "xyes"; then
 360 AC_CONFIG_FILES([dali-adaptor-cxx03.pc dali-adaptor-integration-cxx03.pc])
 361 else
 362 AC_CONFIG_FILES([dali-adaptor.pc dali-adaptor-integration.pc])
 363 fi
 364
 365 if test "x$freetype_bitmap_support" = "xyes"; then
 366 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DFREETYPE_BITMAP_SUPPORT"
 367 fi
 368
 369 AC_OUTPUT
 370
 371
 372 echo "
 373 Configuration
 374 -------------
 375   Prefix:                           $prefix
 376   Debug Build:                      $enable_debug
 377   Trace Build:                      $enable_trace
 378   Compile flags:                    $DALI_ADAPTOR_CFLAGS
 379   Freetype bitmap support (Emoji):  $freetype_bitmap_support
 380   Profile:                          $enable_profile
 381   Data Dir (Read/Write):            $dataReadWriteDir
 382   Data Dir (Read Only):             $dataReadOnlyDir
 383   Tizen SDK 2.2 compatibility:      $with_tizen_2_2_compatibility
 384   EldBus:                           $eldbus_available
 385   Shader Binary Cache:              $enable_shaderbincache
 386   Ecore Version At Least 1.13.0     $ecore_imf_1_13
 387   Network logging enabled:          $enable_networklogging
 388   Font config file:                 $fontConfigurationFile
 389   Using Tizen APP FW libraries:     $enable_appfw
 390   Tizen Platform Config supported   $tizenPlatformConfigSupported
 391 "