build/tizen/adaptor/configure.ac

   1 #
   2 # Copyright (c) 2019 Samsung Electronics Co., Ltd.
   3 #
   4 # Licensed under the Apache License, Version 2.0 (the "License");
   5 # you may not use this file except in compliance with the License.
   6 # You may obtain a copy of the License at
   7 #
   8 # http://www.apache.org/licenses/LICENSE-2.0
   9 #
  10 # Unless required by applicable law or agreed to in writing, software
  11 # distributed under the License is distributed on an "AS IS" BASIS,
  12 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  13 # See the License for the specific language governing permissions and
  14 # limitations under the License.
  15 #
  16
  17 m4_define([dali_version],[0.1.0])
  18 AC_INIT([dali], [dali_version])
  19 AM_INIT_AUTOMAKE([-Wall foreign])
  20 AC_CONFIG_MACRO_DIR([m4])
  21
  22 AC_PROG_CXX
  23 AC_PROG_LIBTOOL
  24 AC_PROG_MKDIR_P
  25
  26 AM_CONDITIONAL(DEADCODE, [no])
  27
  28 m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
  29
  30 LT_INIT
  31
  32 DALI_ADAPTOR_VERSION=dali_version
  33 AC_SUBST(DALI_ADAPTOR_VERSION)
  34
  35 FREETYPE_REQUIRED=9.16.3
  36 # 17.1.11 = Freetype version 2.5.2
  37 FREETYPE_BITMAP_SUPPORT_VERSION=17.1.11
  38
  39 PKG_CHECK_MODULES(EXIF, libexif)
  40 PKG_CHECK_MODULES(FREETYPE, [freetype2 >= $FREETYPE_REQUIRED])
  41 PKG_CHECK_MODULES(FREETYPE_BITMAP_SUPPORT, [freetype2 >= $FREETYPE_BITMAP_SUPPORT_VERSION], [ freetype_bitmap_support=yes  ], [ freetype_bitmap_support=no ] )
  42 PKG_CHECK_MODULES(FONTCONFIG, fontconfig)
  43 PKG_CHECK_MODULES(PNG, libpng)
  44 PKG_CHECK_MODULES(LIBEXIF, libexif)
  45 PKG_CHECK_MODULES(LIBDRM, libdrm)
  46 PKG_CHECK_MODULES(LIBCURL, libcurl)
  47 PKG_CHECK_MODULES(LIBCRYPTO, libcrypto)
  48 PKG_CHECK_MODULES(HARFBUZZ, harfbuzz)
  49 PKG_CHECK_MODULES(FRIBIDI, fribidi)
  50 PKG_CHECK_MODULES(CAIRO, cairo)
  51 PKG_CHECK_MODULES(EVAS, evas)
  52 PKG_CHECK_MODULES(TTRACE,  ttrace, AC_DEFINE(ENABLE_TTRACE, 1, [ttrace available]),
  53                   [ AC_MSG_NOTICE([Tizen Trace not avaiable]) ]
  54                   )
  55
  56 # Currently, dali-adaptor always requires EFL on all platforms.
  57 # (on Wayland & X11, on Tizen devices & Ubuntu PC).
  58 PKG_CHECK_MODULES(ECORE, ecore)
  59 PKG_CHECK_MODULES(ECORE_IPC, ecore-ipc)
  60 PKG_CHECK_MODULES(ECORE_IMF, [ecore-imf >= 1.13], [ecore_imf_1_13=yes], [ecore_imf_1_13=no])
  61 # Check for EldBus.h in ECore
  62 PKG_CHECK_MODULES(ELDBUS, eldbus, [ eldbus_available=yes ],  [ eldbus_available=no ] )
  63
  64 DALI_ELDBUS_AVAILABLE=
  65 if test "x$eldbus_available" = "xyes"; then
  66   DALI_ELDBUS_AVAILABLE=true
  67   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDALI_ELDBUS_AVAILABLE "
  68 fi
  69 AC_SUBST(DALI_ELDBUS_AVAILABLE)
  70
  71
  72 PKG_CHECK_MODULES(TPKP_CURL, tpkp-curl, [ tpkp_curl_available=yes ], [ tpkp_curl_available=no ] )
  73
  74 if test "x$tpkp_curl_available" = "xyes"; then
  75   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DTPK_CURL_ENABLED "
  76 fi
  77
  78 PKG_CHECK_MODULES(UTILX, utilX, [ utilx_available=yes ], [ utilx_available=no ] )
  79
  80 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DPLATFORM_TIZEN"
  81
  82 AC_ARG_ENABLE(exportall,
  83               [AC_HELP_STRING([--enable-exportall],
  84                               [enables the exporting of all the symbols in the library])],
  85               [enable_exportall=yes],
  86               [enable_exportall=no])
  87
  88 AC_ARG_ENABLE([debug],
  89               [AC_HELP_STRING([--enable-debug],
  90                               [Turns on debugging])],
  91               [enable_debug=$enableval],
  92               [enable_debug=no])
  93
  94 AC_ARG_ENABLE(shaderbincache,
  95               [AC_HELP_STRING([--enable-shaderbincache],
  96                               [enables shader binary cache])],
  97               [enable_shaderbincache=$enableval],
  98               [enable_shaderbincache=DISABLE])
  99
 100 AC_ARG_ENABLE(networklogging,
 101               [AC_HELP_STRING([--enable-networklogging],
 102                               [enables network for debug tool])],
 103               [enable_networklogging=$enableval],
 104               [enable_networklogging=no])
 105
 106
 107 if test "x$enable_debug" = "xyes"; then
 108   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDEBUG_ENABLED"
 109 fi
 110
 111 if test "x$enable_trace" = "xyes"; then
 112   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DTRACE_ENABLED"
 113 fi
 114
 115 if test "x$enable_debug" = "xno" -a "x$enable_exportall" = "xno"; then
 116   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -fvisibility=hidden -DHIDE_DALI_INTERNALS"
 117 fi
 118
 119 if test "x$enable_shaderbincache" = "xENABLE"; then
 120   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DSHADERBIN_CACHE_ENABLED"
 121 fi
 122
 123 if test "x$enable_networklogging" = "xyes"; then
 124   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DNETWORK_LOGGING_ENABLED"
 125 fi
 126
 127 # If Ecore IMF version is greater than 1.13, then some structures are different
 128 if test "x$ecore_imf_1_13" = "xyes"; then
 129   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DECORE_IMF_1_13"
 130 fi
 131
 132 # Currently, dali-adaptor requires appfw on Tizen
 133 # and does not require it on Ubuntu.
 134 # So we should be able to enable/disable this option for dali-adaptor.
 135 AC_ARG_ENABLE([appfw],
 136               [AC_HELP_STRING([--enable-appfw],
 137                               [Builds with Tizen App framework libraries, off by default])],
 138               [enable_appfw=$enableval],
 139               [enable_appfw=no])
 140
 141 # Tizen Profile options
 142 AC_ARG_ENABLE([profile],
 143               [AC_HELP_STRING([--enable-profile=COMMON,MOBILE,WEARABLE,TV,IVI,UBUNTU],
 144                             [Select the variant of tizen])],
 145               [enable_profile=$enableval],
 146               [enable_profile=UBUNTU])
 147
 148 # Tizen Major version
 149 AC_ARG_ENABLE([tizen-major-version],
 150               [AC_HELP_STRING([--enable-tizen-major-version],
 151                               [Specify the Tizen Major version for backwards compatibility])],
 152               [enable-tizen-major-version=$enableval],
 153               [enable-tizen-major-version=0])
 154
 155 # Ensure valid profile selected
 156 if test "x$enable_profile" != "xCOMMON" -a "x$enable_profile" != "xMOBILE" -a "x$enable_profile" != "xWEARABLE" -a "x$enable_profile" != "xTV" -a "x$enable_profile" != "xIVI" -a "x$enable_profile" != "xUBUNTU"; then
 157   AC_MSG_ERROR([$enable_profile is an invalid profile])
 158 fi
 159
 160 AC_ARG_ENABLE(wayland,
 161               [  --enable-wayland       Build on Wayland],
 162               enable_wayland=yes,
 163               enable_wayland=no)
 164
 165 AC_ARG_ENABLE(ecore_wayland2,
 166               [  --enable-ecore-wayland2  Build on Ecore Wayland2],
 167               enable_ecore_wayland2=yes,
 168               enable_ecore_wayland2=no)
 169
 170 AC_ARG_ENABLE([rename_so],
 171               [AC_HELP_STRING([--enable-rename-so],
 172                               [Specify whether so file is renamed or not])],
 173               [enable_rename_so=$enableval],
 174               [enable_rename_so=yes])
 175
 176 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDALI_PROFILE_${enable_profile}"
 177 DALI_PROFILE_CFLAGS=" -DDALI_PROFILE_${enable_profile}"
 178 AM_CONDITIONAL([COMMON_PROFILE], [test x$enable_profile = xCOMMON])
 179 AM_CONDITIONAL([MOBILE_PROFILE], [test x$enable_profile = xMOBILE])
 180 AM_CONDITIONAL([WEARABLE_PROFILE], [test x$enable_profile = xWEARABLE])
 181 AM_CONDITIONAL([TV_PROFILE], [test x$enable_profile = xTV])
 182 AM_CONDITIONAL([IVI_PROFILE], [test x$enable_profile = xIVI])
 183 AM_CONDITIONAL([UBUNTU_PROFILE], [test x$enable_profile = xUBUNTU])
 184 AM_CONDITIONAL([WAYLAND], [test x$enable_wayland = xyes])
 185 AM_CONDITIONAL([ECORE_WAYLAND2], [test x$enable_ecore_wayland2 = xyes])
 186 AM_CONDITIONAL([USE_APPFW], [test x$enable_appfw = xyes])
 187 AM_CONDITIONAL([ENABLE_RENAME_SO], [test x$enable_rename_so = xyes])
 188
 189 # Platforms with highp shader support can use vector based text
 190 AM_CONDITIONAL([ENABLE_VECTOR_BASED_TEXT_RENDERING], [test x$enable_profile = xUBUNTU])
 191
 192 AM_CONDITIONAL([ENABLE_NETWORK_LOGGING], [test x$enable_networklogging = xyes])
 193
 194 AM_CONDITIONAL([ENABLE_TRACE], [test x$enable_trace = xyes])
 195
 196 # Platforms should either enable features or remove them, they
 197 # should not disable features. This allows the developer to override
 198 # features through the command line.
 199
 200 if test "x$enable_profile" = "xCOMMON"; then
 201 PKG_CHECK_MODULES(OPENGLES20, glesv2 egl)
 202 fi
 203
 204 if test "x$enable_profile" = "xMOBILE"; then
 205 PKG_CHECK_MODULES(OPENGLES20, glesv2 egl)
 206 enable_assimp=no
 207 fi
 208
 209 if test "x$enable_profile" = "xLITE"; then
 210 PKG_CHECK_MODULES(OPENGLES20, gles20)
 211 fi
 212
 213 PKG_CHECK_MODULES(DALICORE, dali-core)
 214
 215 if test "x$enable_profile" = "xWEARABLE"; then
 216 PKG_CHECK_MODULES(OPENGLES20, glesv2)
 217 PKG_CHECK_MODULES(SCREENCONNECTORPROVIDER, screen_connector_provider)
 218 PKG_CHECK_MODULES(APPFW_WATCH, capi-appfw-watch-application,
 219    [watch_available=yes], [watch_available=no] )
 220 PKG_CHECK_MODULES(APPCORE_WATCH, appcore-watch)
 221 if test "x$watch_available" = "xyes"; then
 222   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DAPPCORE_WATCH_AVAILABLE"
 223 fi
 224 fi
 225
 226 if test "x$enable_profile" = "xTV"; then
 227 PKG_CHECK_MODULES(OPENGLES20, glesv2)
 228 fi
 229
 230 if test "x$enable_profile" = "xIVI"; then
 231 PKG_CHECK_MODULES(OPENGLES20, glesv2)
 232 fi
 233
 234 if test "x$enable_profile" = "xUBUNTU"; then
 235 PKG_CHECK_MODULES(OPENGLES20, glesv2 egl)
 236 else
 237
 238 PKG_CHECK_MODULES(DLOG, dlog)
 239 PKG_CHECK_MODULES(TTS, tts)
 240 PKG_CHECK_MODULES(VCONF, vconf)
 241 PKG_CHECK_MODULES(CAPI_SYSTEM_INFO, capi-system-info)
 242 PKG_CHECK_MODULES(CAPI_SYSTEM_SENSOR, capi-system-sensor, [ capi_system_sensor_support=yes ], [ capi_system_sensor_support=no ] )
 243
 244 if test "x$capi_system_sensor_support" = "xyes"; then
 245   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DCAPI_SYSTEM_SENSOR_SUPPORT"
 246 fi
 247
 248 fi # ubuntu profile test
 249
 250 if test "x$enable_appfw" = "xyes"; then
 251 PKG_CHECK_MODULES(CAPI_SYSTEM_SYSTEM_SETTINGS, capi-system-system-settings)
 252 if test "x$enable_tizen_major_version" = "x3"; then
 253 PKG_CHECK_MODULES(CAPI_APPFW_APPLICATION, capi-appfw-application)
 254 PKG_CHECK_MODULES(ELEMENTARY, elementary)
 255 else
 256 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DWIDGET_AVAILABLE"
 257 PKG_CHECK_MODULES(BUNDLE, bundle)
 258 PKG_CHECK_MODULES(CAPI_APPFW_APPLICATION, appcore-ui)
 259 PKG_CHECK_MODULES(CAPI_APPFW_WIDGET_BASE, appcore-widget-base)
 260 PKG_CHECK_MODULES(CAPI_APPFW_COMMON, capi-appfw-app-common)
 261 PKG_CHECK_MODULES(CAPI_APPFW_CONTROL, capi-appfw-app-control)
 262 fi
 263 else
 264 PKG_CHECK_MODULES(ELEMENTARY, elementary)
 265 fi
 266
 267 # Using EFL api's for  WAYLAND AND X11 to run on ecore mainloop
 268 if test "x$enable_wayland" = "xyes"; then
 269
 270 if test "x$enable_ecore_wayland2" = "xyes"; then
 271 PKG_CHECK_MODULES(WAYLAND, [ecore-wl2 egl wayland-egl wayland-egl-tizen wayland-client >= 1.2.0 xkbcommon libtbm])
 272 else
 273 PKG_CHECK_MODULES(WAYLAND, [ecore-wayland egl wayland-egl wayland-client >= 1.2.0 xkbcommon libtbm])
 274 fi
 275
 276 else
 277 PKG_CHECK_MODULES(ECORE_X, [ecore-x],
 278                   [DALI_USE_ECORE_X11=1],
 279                   [DALI_USE_ECORE_X11=0])
 280 PKG_CHECK_MODULES(X11, [x11],
 281                   [DALI_USE_X11=1],
 282                   [DALI_USE_X11=0])
 283 fi
 284
 285 # remove this when we update common repos
 286 # common profile currently does not have wayland extensions like xdg-shell
 287 if test "x$enable_wayland" = "xyes"; then
 288 if test "x$enable_profile" != "xCOMMON"; then
 289 PKG_CHECK_MODULES(WAYLAND_EXTENSION, xdg-shell-client text-client input-method-client)
 290 fi
 291 fi
 292
 293 if test x$DALI_DATA_RW_DIR != x; then
 294   dataReadWriteDir=$DALI_DATA_RW_DIR
 295 else
 296   dataReadWriteDir=${prefix}/share/dali/
 297 fi
 298
 299 if test x$DALI_DATA_RO_DIR != x; then
 300   dataReadOnlyDir=$DALI_DATA_RO_DIR
 301 else
 302   dataReadOnlyDir=${prefix}/share/dali/
 303 fi
 304
 305 if test x$TIZEN_PLATFORM_CONFIG_SUPPORTED != x; then
 306   tizenPlatformConfigSupported=$TIZEN_PLATFORM_CONFIG_SUPPORTED
 307 else
 308   tizenPlatformConfigSupported=0
 309 fi
 310
 311 if test x$FONT_CONFIGURATION_FILE != x; then
 312   fontConfigurationFile=$FONT_CONFIGURATION_FILE
 313 fi
 314
 315 if test "x$enable_profile" = "xUBUNTU"; then
 316   cachePath=$HOME
 317 else
 318   cachePath="/home/owner"
 319 fi # ubuntu profile test
 320
 321 AC_SUBST(cachePath)
 322 AC_SUBST(dataReadWriteDir)
 323 AC_SUBST(dataReadOnlyDir)
 324 AC_SUBST(DALI_ADAPTOR_CFLAGS)
 325 AC_SUBST(DALI_PROFILE_CFLAGS)
 326 AC_SUBST(fontConfigurationFile)
 327 AC_SUBST(tizenPlatformConfigSupported)
 328
 329 # Specify the include directory for development headers
 330 #devincludepath=${includedir}/dali/internal
 331 devincludepath=${includedir}
 332 AC_SUBST(devincludepath)
 333
 334 AC_CONFIG_FILES([
 335   Makefile
 336   dali-adaptor.pc
 337   dali-adaptor-integration.pc
 338   ../../../dali/internal/adaptor/common/system-cache-path.cpp:./system-cache-path.in
 339 ])
 340
 341 if test "x$freetype_bitmap_support" = "xyes"; then
 342 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DFREETYPE_BITMAP_SUPPORT"
 343 fi
 344
 345 AC_OUTPUT
 346
 347
 348 echo "
 349 Configuration
 350 -------------
 351   Prefix:                           $prefix
 352   Debug Build:                      $enable_debug
 353   Trace Build:                      $enable_trace
 354   Compile flags:                    $DALI_ADAPTOR_CFLAGS
 355   Freetype bitmap support (Emoji):  $freetype_bitmap_support
 356   Profile:                          $enable_profile
 357   Data Dir (Read/Write):            $dataReadWriteDir
 358   Data Dir (Read Only):             $dataReadOnlyDir
 359   EldBus:                           $eldbus_available
 360   Shader Binary Cache:              $enable_shaderbincache
 361   Ecore Version At Least 1.13.0     $ecore_imf_1_13
 362   Network logging enabled:          $enable_networklogging
 363   Font config file:                 $fontConfigurationFile
 364   Using Tizen APP FW libraries:     $enable_appfw
 365   Tizen Platform Config supported   $tizenPlatformConfigSupported
 366 "