build/tizen/adaptor/configure.ac

   1 #
   2 # Copyright (c) 2019 Samsung Electronics Co., Ltd.
   3 #
   4 # Licensed under the Apache License, Version 2.0 (the "License");
   5 # you may not use this file except in compliance with the License.
   6 # You may obtain a copy of the License at
   7 #
   8 # http://www.apache.org/licenses/LICENSE-2.0
   9 #
  10 # Unless required by applicable law or agreed to in writing, software
  11 # distributed under the License is distributed on an "AS IS" BASIS,
  12 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  13 # See the License for the specific language governing permissions and
  14 # limitations under the License.
  15 #
  16
  17 m4_define([dali_version],[0.1.0])
  18 AC_INIT([dali], [dali_version])
  19 AM_INIT_AUTOMAKE([-Wall foreign])
  20 AC_CONFIG_MACRO_DIR([m4])
  21
  22 AC_PROG_CXX
  23 AC_PROG_LIBTOOL
  24 AC_PROG_MKDIR_P
  25
  26 AM_CONDITIONAL(DEADCODE, [no])
  27
  28 m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
  29
  30 LT_INIT
  31
  32 DALI_ADAPTOR_VERSION=dali_version
  33 AC_SUBST(DALI_ADAPTOR_VERSION)
  34
  35 FREETYPE_REQUIRED=9.16.3
  36 # 17.1.11 = Freetype version 2.5.2
  37 FREETYPE_BITMAP_SUPPORT_VERSION=17.1.11
  38
  39 PKG_CHECK_MODULES(EXIF, libexif)
  40 PKG_CHECK_MODULES(FREETYPE, [freetype2 >= $FREETYPE_REQUIRED])
  41 PKG_CHECK_MODULES(FREETYPE_BITMAP_SUPPORT, [freetype2 >= $FREETYPE_BITMAP_SUPPORT_VERSION], [ freetype_bitmap_support=yes  ], [ freetype_bitmap_support=no ] )
  42 PKG_CHECK_MODULES(FONTCONFIG, fontconfig)
  43 PKG_CHECK_MODULES(PNG, libpng)
  44 PKG_CHECK_MODULES(LIBEXIF, libexif)
  45 PKG_CHECK_MODULES(LIBDRM, libdrm)
  46 PKG_CHECK_MODULES(LIBCURL, libcurl)
  47 PKG_CHECK_MODULES(HARFBUZZ, harfbuzz)
  48 PKG_CHECK_MODULES(FRIBIDI, fribidi)
  49 PKG_CHECK_MODULES(CAIRO, cairo)
  50 PKG_CHECK_MODULES(EVAS, evas)
  51 PKG_CHECK_MODULES(TTRACE,  ttrace, AC_DEFINE(ENABLE_TTRACE, 1, [ttrace available]),
  52                   [ AC_MSG_NOTICE([Tizen Trace not avaiable]) ]
  53                   )
  54
  55 # Currently, dali-adaptor always requires EFL on all platforms.
  56 # (on Wayland & X11, on Tizen devices & Ubuntu PC).
  57 PKG_CHECK_MODULES(ECORE, ecore)
  58 PKG_CHECK_MODULES(ECORE_IPC, ecore-ipc)
  59 PKG_CHECK_MODULES(ECORE_IMF, [ecore-imf >= 1.13], [ecore_imf_1_13=yes], [ecore_imf_1_13=no])
  60 # Check for EldBus.h in ECore
  61 PKG_CHECK_MODULES(ELDBUS, eldbus, [ eldbus_available=yes ],  [ eldbus_available=no ] )
  62
  63 DALI_ELDBUS_AVAILABLE=
  64 if test "x$eldbus_available" = "xyes"; then
  65   DALI_ELDBUS_AVAILABLE=true
  66   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDALI_ELDBUS_AVAILABLE "
  67 fi
  68 AC_SUBST(DALI_ELDBUS_AVAILABLE)
  69
  70
  71 PKG_CHECK_MODULES(TPKP_CURL, tpkp-curl, [ tpkp_curl_available=yes ], [ tpkp_curl_available=no ] )
  72
  73 if test "x$tpkp_curl_available" = "xyes"; then
  74   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DTPK_CURL_ENABLED "
  75 fi
  76
  77 PKG_CHECK_MODULES(UTILX, utilX, [ utilx_available=yes ], [ utilx_available=no ] )
  78
  79 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DPLATFORM_TIZEN"
  80
  81 AC_ARG_ENABLE(exportall,
  82               [AC_HELP_STRING([--enable-exportall],
  83                               [enables the exporting of all the symbols in the library])],
  84               [enable_exportall=yes],
  85               [enable_exportall=no])
  86
  87 AC_ARG_ENABLE([debug],
  88               [AC_HELP_STRING([--enable-debug],
  89                               [Turns on debugging])],
  90               [enable_debug=$enableval],
  91               [enable_debug=no])
  92
  93 AC_ARG_ENABLE(shaderbincache,
  94               [AC_HELP_STRING([--enable-shaderbincache],
  95                               [enables shader binary cache])],
  96               [enable_shaderbincache=$enableval],
  97               [enable_shaderbincache=DISABLE])
  98
  99 AC_ARG_ENABLE(networklogging,
 100               [AC_HELP_STRING([--enable-networklogging],
 101                               [enables network for debug tool])],
 102               [enable_networklogging=$enableval],
 103               [enable_networklogging=no])
 104
 105
 106 if test "x$enable_debug" = "xyes"; then
 107   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDEBUG_ENABLED"
 108 fi
 109
 110 if test "x$enable_trace" = "xyes"; then
 111   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DTRACE_ENABLED"
 112 fi
 113
 114 if test "x$enable_debug" = "xno" -a "x$enable_exportall" = "xno"; then
 115   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -fvisibility=hidden -DHIDE_DALI_INTERNALS"
 116 fi
 117
 118 if test "x$enable_shaderbincache" = "xENABLE"; then
 119   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DSHADERBIN_CACHE_ENABLED"
 120 fi
 121
 122 if test "x$enable_networklogging" = "xyes"; then
 123   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DNETWORK_LOGGING_ENABLED"
 124 fi
 125
 126 # If Ecore IMF version is greater than 1.13, then some structures are different
 127 if test "x$ecore_imf_1_13" = "xyes"; then
 128   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DECORE_IMF_1_13"
 129 fi
 130
 131 # Currently, dali-adaptor requires appfw on Tizen
 132 # and does not require it on Ubuntu.
 133 # So we should be able to enable/disable this option for dali-adaptor.
 134 AC_ARG_ENABLE([appfw],
 135               [AC_HELP_STRING([--enable-appfw],
 136                               [Builds with Tizen App framework libraries, off by default])],
 137               [enable_appfw=$enableval],
 138               [enable_appfw=no])
 139
 140 # Tizen Profile options
 141 AC_ARG_ENABLE([profile],
 142               [AC_HELP_STRING([--enable-profile=COMMON,MOBILE,WEARABLE,TV,IVI,UBUNTU],
 143                             [Select the variant of tizen])],
 144               [enable_profile=$enableval],
 145               [enable_profile=UBUNTU])
 146
 147 # Tizen Major version
 148 AC_ARG_ENABLE([tizen-major-version],
 149               [AC_HELP_STRING([--enable-tizen-major-version],
 150                               [Specify the Tizen Major version for backwards compatibility])],
 151               [enable-tizen-major-version=$enableval],
 152               [enable-tizen-major-version=0])
 153
 154 # Ensure valid profile selected
 155 if test "x$enable_profile" != "xCOMMON" -a "x$enable_profile" != "xMOBILE" -a "x$enable_profile" != "xWEARABLE" -a "x$enable_profile" != "xTV" -a "x$enable_profile" != "xIVI" -a "x$enable_profile" != "xUBUNTU"; then
 156   AC_MSG_ERROR([$enable_profile is an invalid profile])
 157 fi
 158
 159 AC_ARG_ENABLE(wayland,
 160               [  --enable-wayland       Build on Wayland],
 161               enable_wayland=yes,
 162               enable_wayland=no)
 163
 164 AC_ARG_ENABLE(ecore_wayland2,
 165               [  --enable-ecore-wayland2  Build on Ecore Wayland2],
 166               enable_ecore_wayland2=yes,
 167               enable_ecore_wayland2=no)
 168
 169 AC_ARG_ENABLE([rename_so],
 170               [AC_HELP_STRING([--enable-rename-so],
 171                               [Specify whether so file is renamed or not])],
 172               [enable_rename_so=$enableval],
 173               [enable_rename_so=yes])
 174
 175 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDALI_PROFILE_${enable_profile}"
 176 DALI_PROFILE_CFLAGS=" -DDALI_PROFILE_${enable_profile}"
 177 AM_CONDITIONAL([COMMON_PROFILE], [test x$enable_profile = xCOMMON])
 178 AM_CONDITIONAL([MOBILE_PROFILE], [test x$enable_profile = xMOBILE])
 179 AM_CONDITIONAL([WEARABLE_PROFILE], [test x$enable_profile = xWEARABLE])
 180 AM_CONDITIONAL([TV_PROFILE], [test x$enable_profile = xTV])
 181 AM_CONDITIONAL([IVI_PROFILE], [test x$enable_profile = xIVI])
 182 AM_CONDITIONAL([UBUNTU_PROFILE], [test x$enable_profile = xUBUNTU])
 183 AM_CONDITIONAL([WAYLAND], [test x$enable_wayland = xyes])
 184 AM_CONDITIONAL([ECORE_WAYLAND2], [test x$enable_ecore_wayland2 = xyes])
 185 AM_CONDITIONAL([USE_APPFW], [test x$enable_appfw = xyes])
 186 AM_CONDITIONAL([ENABLE_RENAME_SO], [test x$enable_rename_so = xyes])
 187
 188 # Platforms with highp shader support can use vector based text
 189 AM_CONDITIONAL([ENABLE_VECTOR_BASED_TEXT_RENDERING], [test x$enable_profile = xUBUNTU])
 190
 191 AM_CONDITIONAL([ENABLE_NETWORK_LOGGING], [test x$enable_networklogging = xyes])
 192
 193 AM_CONDITIONAL([ENABLE_TRACE], [test x$enable_trace = xyes])
 194
 195 # Platforms should either enable features or remove them, they
 196 # should not disable features. This allows the developer to override
 197 # features through the command line.
 198
 199 if test "x$enable_profile" = "xCOMMON"; then
 200 PKG_CHECK_MODULES(OPENGLES20, glesv2 egl)
 201 fi
 202
 203 if test "x$enable_profile" = "xMOBILE"; then
 204 PKG_CHECK_MODULES(OPENGLES20, glesv2 egl)
 205 enable_assimp=no
 206 fi
 207
 208 if test "x$enable_profile" = "xLITE"; then
 209 PKG_CHECK_MODULES(OPENGLES20, gles20)
 210 fi
 211
 212 PKG_CHECK_MODULES(DALICORE, dali-core)
 213
 214 if test "x$enable_profile" = "xWEARABLE"; then
 215 PKG_CHECK_MODULES(OPENGLES20, glesv2)
 216 PKG_CHECK_MODULES(SCREENCONNECTORPROVIDER, screen_connector_provider)
 217 PKG_CHECK_MODULES(APPFW_WATCH, capi-appfw-watch-application,
 218    [watch_available=yes], [watch_available=no] )
 219 PKG_CHECK_MODULES(APPCORE_WATCH, appcore-watch)
 220 if test "x$watch_available" = "xyes"; then
 221   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DAPPCORE_WATCH_AVAILABLE"
 222 fi
 223 fi
 224
 225 if test "x$enable_profile" = "xTV"; then
 226 PKG_CHECK_MODULES(OPENGLES20, glesv2)
 227 fi
 228
 229 if test "x$enable_profile" = "xIVI"; then
 230 PKG_CHECK_MODULES(OPENGLES20, glesv2)
 231 fi
 232
 233 if test "x$enable_profile" = "xUBUNTU"; then
 234 PKG_CHECK_MODULES(OPENGLES20, glesv2 egl)
 235 else
 236
 237 PKG_CHECK_MODULES(DLOG, dlog)
 238 PKG_CHECK_MODULES(TTS, tts)
 239 PKG_CHECK_MODULES(VCONF, vconf)
 240 PKG_CHECK_MODULES(CAPI_SYSTEM_INFO, capi-system-info)
 241 PKG_CHECK_MODULES(CAPI_SYSTEM_SENSOR, capi-system-sensor, [ capi_system_sensor_support=yes ], [ capi_system_sensor_support=no ] )
 242
 243 if test "x$capi_system_sensor_support" = "xyes"; then
 244   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DCAPI_SYSTEM_SENSOR_SUPPORT"
 245 fi
 246
 247 fi # ubuntu profile test
 248
 249 if test "x$enable_appfw" = "xyes"; then
 250 PKG_CHECK_MODULES(CAPI_SYSTEM_SYSTEM_SETTINGS, capi-system-system-settings)
 251 if test "x$enable_tizen_major_version" = "x3"; then
 252 PKG_CHECK_MODULES(CAPI_APPFW_APPLICATION, capi-appfw-application)
 253 PKG_CHECK_MODULES(ELEMENTARY, elementary)
 254 else
 255 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DWIDGET_AVAILABLE"
 256 PKG_CHECK_MODULES(BUNDLE, bundle)
 257 PKG_CHECK_MODULES(CAPI_APPFW_APPLICATION, appcore-ui)
 258 PKG_CHECK_MODULES(CAPI_APPFW_WIDGET_BASE, appcore-widget-base)
 259 PKG_CHECK_MODULES(CAPI_APPFW_COMMON, capi-appfw-app-common)
 260 PKG_CHECK_MODULES(CAPI_APPFW_CONTROL, capi-appfw-app-control)
 261 fi
 262 else
 263 PKG_CHECK_MODULES(ELEMENTARY, elementary)
 264 fi
 265
 266 # Using EFL api's for  WAYLAND AND X11 to run on ecore mainloop
 267 if test "x$enable_wayland" = "xyes"; then
 268
 269 if test "x$enable_ecore_wayland2" = "xyes"; then
 270 PKG_CHECK_MODULES(WAYLAND, [ecore-wl2 egl wayland-egl wayland-egl-tizen wayland-client >= 1.2.0 xkbcommon libtbm])
 271 else
 272 PKG_CHECK_MODULES(WAYLAND, [ecore-wayland egl wayland-egl wayland-client >= 1.2.0 xkbcommon libtbm])
 273 fi
 274
 275 else
 276 PKG_CHECK_MODULES(ECORE_X, [ecore-x],
 277                   [DALI_USE_ECORE_X11=1],
 278                   [DALI_USE_ECORE_X11=0])
 279 PKG_CHECK_MODULES(X11, [x11],
 280                   [DALI_USE_X11=1],
 281                   [DALI_USE_X11=0])
 282 fi
 283
 284 # remove this when we update common repos
 285 # common profile currently does not have wayland extensions like xdg-shell
 286 if test "x$enable_wayland" = "xyes"; then
 287 if test "x$enable_profile" != "xCOMMON"; then
 288 PKG_CHECK_MODULES(WAYLAND_EXTENSION, xdg-shell-client text-client input-method-client)
 289 fi
 290 fi
 291
 292 if test x$DALI_DATA_RW_DIR != x; then
 293   dataReadWriteDir=$DALI_DATA_RW_DIR
 294 else
 295   dataReadWriteDir=${prefix}/share/dali/
 296 fi
 297
 298 if test x$DALI_DATA_RO_DIR != x; then
 299   dataReadOnlyDir=$DALI_DATA_RO_DIR
 300 else
 301   dataReadOnlyDir=${prefix}/share/dali/
 302 fi
 303
 304 if test x$TIZEN_PLATFORM_CONFIG_SUPPORTED != x; then
 305   tizenPlatformConfigSupported=$TIZEN_PLATFORM_CONFIG_SUPPORTED
 306 else
 307   tizenPlatformConfigSupported=0
 308 fi
 309
 310 if test x$FONT_CONFIGURATION_FILE != x; then
 311   fontConfigurationFile=$FONT_CONFIGURATION_FILE
 312 fi
 313
 314 if test "x$enable_profile" = "xUBUNTU"; then
 315   cachePath=$HOME
 316 else
 317   cachePath="/home/owner"
 318 fi # ubuntu profile test
 319
 320 AC_SUBST(cachePath)
 321 AC_SUBST(dataReadWriteDir)
 322 AC_SUBST(dataReadOnlyDir)
 323 AC_SUBST(DALI_ADAPTOR_CFLAGS)
 324 AC_SUBST(DALI_PROFILE_CFLAGS)
 325 AC_SUBST(fontConfigurationFile)
 326 AC_SUBST(tizenPlatformConfigSupported)
 327
 328 # Specify the include directory for development headers
 329 #devincludepath=${includedir}/dali/internal
 330 devincludepath=${includedir}
 331 AC_SUBST(devincludepath)
 332
 333 AC_CONFIG_FILES([
 334   Makefile
 335   dali-adaptor.pc
 336   dali-adaptor-integration.pc
 337   ../../../dali/internal/adaptor/common/system-cache-path.cpp:./system-cache-path.in
 338 ])
 339
 340 if test "x$freetype_bitmap_support" = "xyes"; then
 341 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DFREETYPE_BITMAP_SUPPORT"
 342 fi
 343
 344 AC_OUTPUT
 345
 346
 347 echo "
 348 Configuration
 349 -------------
 350   Prefix:                           $prefix
 351   Debug Build:                      $enable_debug
 352   Trace Build:                      $enable_trace
 353   Compile flags:                    $DALI_ADAPTOR_CFLAGS
 354   Freetype bitmap support (Emoji):  $freetype_bitmap_support
 355   Profile:                          $enable_profile
 356   Data Dir (Read/Write):            $dataReadWriteDir
 357   Data Dir (Read Only):             $dataReadOnlyDir
 358   EldBus:                           $eldbus_available
 359   Shader Binary Cache:              $enable_shaderbincache
 360   Ecore Version At Least 1.13.0     $ecore_imf_1_13
 361   Network logging enabled:          $enable_networklogging
 362   Font config file:                 $fontConfigurationFile
 363   Using Tizen APP FW libraries:     $enable_appfw
 364   Tizen Platform Config supported   $tizenPlatformConfigSupported
 365 "