build/tizen/adaptor/configure.ac

   1 #
   2 # Copyright (c) 2018 Samsung Electronics Co., Ltd.
   3 #
   4 # Licensed under the Apache License, Version 2.0 (the "License");
   5 # you may not use this file except in compliance with the License.
   6 # You may obtain a copy of the License at
   7 #
   8 # http://www.apache.org/licenses/LICENSE-2.0
   9 #
  10 # Unless required by applicable law or agreed to in writing, software
  11 # distributed under the License is distributed on an "AS IS" BASIS,
  12 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  13 # See the License for the specific language governing permissions and
  14 # limitations under the License.
  15 #
  16
  17 m4_define([dali_version],[0.1.0])
  18 AC_INIT([dali], [dali_version])
  19 AM_INIT_AUTOMAKE([-Wall foreign])
  20 AC_CONFIG_MACRO_DIR([m4])
  21
  22 AC_PROG_CXX
  23 AC_PROG_LIBTOOL
  24 AC_PROG_MKDIR_P
  25
  26 AM_CONDITIONAL(DEADCODE, [no])
  27
  28 m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
  29
  30 LT_INIT
  31
  32 DALI_ADAPTOR_VERSION=dali_version
  33 AC_SUBST(DALI_ADAPTOR_VERSION)
  34
  35 FREETYPE_REQUIRED=9.16.3
  36 # 17.1.11 = Freetype version 2.5.2
  37 FREETYPE_BITMAP_SUPPORT_VERSION=17.1.11
  38
  39 PKG_CHECK_MODULES(EXIF, libexif)
  40 PKG_CHECK_MODULES(FREETYPE, [freetype2 >= $FREETYPE_REQUIRED])
  41 PKG_CHECK_MODULES(FREETYPE_BITMAP_SUPPORT, [freetype2 >= $FREETYPE_BITMAP_SUPPORT_VERSION], [ freetype_bitmap_support=yes  ], [ freetype_bitmap_support=no ] )
  42 PKG_CHECK_MODULES(FONTCONFIG, fontconfig)
  43 PKG_CHECK_MODULES(PNG, libpng)
  44 PKG_CHECK_MODULES(LIBEXIF, libexif)
  45 PKG_CHECK_MODULES(LIBDRM, libdrm)
  46 PKG_CHECK_MODULES(LIBCURL, libcurl)
  47 PKG_CHECK_MODULES(LIBCRYPTO, libcrypto)
  48 PKG_CHECK_MODULES(HARFBUZZ, harfbuzz)
  49 PKG_CHECK_MODULES(FRIBIDI, fribidi)
  50 PKG_CHECK_MODULES(EVAS, evas)
  51 PKG_CHECK_MODULES(TTRACE,  ttrace, AC_DEFINE(ENABLE_TTRACE, 1, [ttrace available]),
  52                   [ AC_MSG_NOTICE([Tizen Trace not available]) ]
  53                   )
  54
  55 # Currently, dali-adaptor always requires EFL on all platforms.
  56 # (on Wayland & X11, on Tizen devices & Ubuntu PC).
  57 PKG_CHECK_MODULES(ECORE, ecore)
  58 PKG_CHECK_MODULES(ECORE_IPC, ecore-ipc)
  59 PKG_CHECK_MODULES(ECORE_IMF, [ecore-imf >= 1.13], [ecore_imf_1_13=yes], [ecore_imf_1_13=no])
  60 # Check for EldBus.h in ECore
  61 PKG_CHECK_MODULES(ELDBUS, eldbus, [ eldbus_available=yes ],  [ eldbus_available=no ] )
  62
  63 DALI_ELDBUS_AVAILABLE=
  64 if test "x$eldbus_available" = "xyes"; then
  65   DALI_ELDBUS_AVAILABLE=true
  66   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDALI_ELDBUS_AVAILABLE "
  67 fi
  68 AC_SUBST(DALI_ELDBUS_AVAILABLE)
  69
  70
  71 if test "x$enable_cxx03_abi" = "xyes"; then
  72 PKG_CHECK_MODULES(TPKP_CURL, tpkp-curl-deprecated, [ tpkp_curl_available=yes ], [ tpkp_curl_available=no ] )
  73 else
  74 PKG_CHECK_MODULES(TPKP_CURL, tpkp-curl, [ tpkp_curl_available=yes ], [ tpkp_curl_available=no ] )
  75 fi
  76
  77 if test "x$tpkp_curl_available" = "xyes"; then
  78   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DTPK_CURL_ENABLED "
  79 fi
  80
  81 PKG_CHECK_MODULES(UTILX, utilX, [ utilx_available=yes ], [ utilx_available=no ] )
  82
  83 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DPLATFORM_TIZEN"
  84
  85 AC_ARG_ENABLE(exportall,
  86               [AC_HELP_STRING([--enable-exportall],
  87                               [enables the exporting of all the symbols in the library])],
  88               [enable_exportall=yes],
  89               [enable_exportall=no])
  90
  91 AC_ARG_ENABLE([debug],
  92               [AC_HELP_STRING([--enable-debug],
  93                               [Turns on debugging])],
  94               [enable_debug=$enableval],
  95               [enable_debug=no])
  96
  97 AC_ARG_ENABLE(shaderbincache,
  98               [AC_HELP_STRING([--enable-shaderbincache],
  99                               [enables shader binary cache])],
 100               [enable_shaderbincache=$enableval],
 101               [enable_shaderbincache=DISABLE])
 102
 103 AC_ARG_ENABLE(networklogging,
 104               [AC_HELP_STRING([--enable-networklogging],
 105                               [enables network for debug tool])],
 106               [enable_networklogging=$enableval],
 107               [enable_networklogging=no])
 108
 109
 110 if test "x$enable_debug" = "xyes"; then
 111   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDEBUG_ENABLED"
 112 fi
 113
 114 if test "x$enable_trace" = "xyes"; then
 115   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DTRACE_ENABLED"
 116 fi
 117
 118 if test "x$enable_debug" = "xno" -a "x$enable_exportall" = "xno"; then
 119   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -fvisibility=hidden -DHIDE_DALI_INTERNALS"
 120 fi
 121
 122 if test "x$enable_shaderbincache" = "xENABLE"; then
 123   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DSHADERBIN_CACHE_ENABLED"
 124 fi
 125
 126 if test "x$enable_networklogging" = "xyes"; then
 127   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DNETWORK_LOGGING_ENABLED"
 128 fi
 129
 130 # If Ecore IMF version is greater than 1.13, then some structures are different
 131 if test "x$ecore_imf_1_13" = "xyes"; then
 132   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DECORE_IMF_1_13"
 133 fi
 134
 135 AC_ARG_ENABLE([gles],
 136               [AC_HELP_STRING([--enable-gles],
 137                               [Specify the OpenGL ES version for backwards compatibility])],
 138               [enable_gles=$enableval],
 139               [enable_gles=20])
 140
 141 AC_ARG_ENABLE([vulkan],
 142               [AC_HELP_STRING([--enable-vulkan],
 143                               [Enable Vulkan support])],
 144               [enable_vulkan=$enableval],
 145               [enable_vulkan=no])
 146
 147 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDALI_GLES_VERSION=${enable_gles}"
 148
 149 # Currently, dali-adaptor requires appfw on Tizen
 150 # and does not require it on Ubuntu.
 151 # So we should be able to enable/disable this option for dali-adaptor.
 152 AC_ARG_ENABLE([appfw],
 153               [AC_HELP_STRING([--enable-appfw],
 154                               [Builds with Tizen App framework libraries, off by default])],
 155               [enable_appfw=$enableval],
 156               [enable_appfw=no])
 157
 158 # Option to allow building with Tizen SDK 2.2
 159 AC_ARG_WITH([tizen-2-2-compatibility],
 160             [AC_HELP_STRING([--with-tizen-2-2-compatibility],
 161                             [Use Tizen SDK 2.2 compatibility])],
 162             [with_tizen_2_2_compatibility=$withval],
 163             [with_tizen_2_2_compatibility=no])
 164
 165 # Tizen Profile options
 166 AC_ARG_ENABLE([profile],
 167               [AC_HELP_STRING([--enable-profile=COMMON,MOBILE,WEARABLE,TV,IVI,UBUNTU],
 168                             [Select the variant of tizen])],
 169               [enable_profile=$enableval],
 170               [enable_profile=UBUNTU])
 171
 172 # Tizen Major version
 173 AC_ARG_ENABLE([tizen-major-version],
 174               [AC_HELP_STRING([--enable-tizen-major-version],
 175                               [Specify the Tizen Major version for backwards compatibility])],
 176               [enable-tizen-major-version=$enableval],
 177               [enable-tizen-major-version=0])
 178
 179 # Ensure valid profile selected
 180 if test "x$enable_profile" != "xCOMMON" -a "x$enable_profile" != "xMOBILE" -a "x$enable_profile" != "xWEARABLE" -a "x$enable_profile" != "xTV" -a "x$enable_profile" != "xIVI" -a "x$enable_profile" != "xUBUNTU"; then
 181   AC_MSG_ERROR([$enable_profile is an invalid profile])
 182 fi
 183
 184 AC_ARG_ENABLE(wayland,
 185               [  --enable-wayland       Build on Wayland],
 186               enable_wayland=yes,
 187               enable_wayland=no)
 188
 189 AC_ARG_ENABLE([cxx03_abi],
 190               [AC_HELP_STRING([--enable-cxx03-abi],
 191                               [Specify abi for the build])],
 192               [enable_cxx03_abi=$enableval],
 193               [enable_cxx03_abi=no])
 194
 195 AC_ARG_ENABLE([rename_so],
 196               [AC_HELP_STRING([--enable-rename-so],
 197                               [Specify whether so file is renamed or not])],
 198               [enable_rename_so=$enableval],
 199               [enable_rename_so=yes])
 200
 201 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDALI_PROFILE_${enable_profile}"
 202 DALI_PROFILE_CFLAGS=" -DDALI_PROFILE_${enable_profile}"
 203 AM_CONDITIONAL([COMMON_PROFILE], [test x$enable_profile = xCOMMON])
 204 AM_CONDITIONAL([MOBILE_PROFILE], [test x$enable_profile = xMOBILE])
 205 AM_CONDITIONAL([WEARABLE_PROFILE], [test x$enable_profile = xWEARABLE])
 206 AM_CONDITIONAL([TV_PROFILE], [test x$enable_profile = xTV])
 207 AM_CONDITIONAL([IVI_PROFILE], [test x$enable_profile = xIVI])
 208 AM_CONDITIONAL([UBUNTU_PROFILE], [test x$enable_profile = xUBUNTU])
 209 AM_CONDITIONAL([WAYLAND], [test x$enable_wayland = xyes])
 210 AM_CONDITIONAL([USE_APPFW], [test x$enable_appfw = xyes])
 211 AM_CONDITIONAL([USE_APPFW_EFL_BASE], [test x$enable_tizen_major_version = x3])
 212 AM_CONDITIONAL([ENABLE_CXX03_ABI], [test x$enable_cxx03_abi = xyes])
 213 AM_CONDITIONAL([ENABLE_RENAME_SO], [test x$enable_rename_so = xyes])
 214
 215 # Platforms with highp shader support can use vector based text
 216 AM_CONDITIONAL([ENABLE_VECTOR_BASED_TEXT_RENDERING], [test x$enable_profile = xUBUNTU])
 217
 218 AM_CONDITIONAL([ENABLE_NETWORK_LOGGING], [test x$enable_networklogging = xyes])
 219
 220 AM_CONDITIONAL([ENABLE_TRACE], [test x$enable_trace = xyes])
 221
 222 # Platforms should either enable features or remove them, they
 223 # should not disable features. This allows the developer to override
 224 # features through the command line.
 225
 226 if test "x$enable_profile" = "xCOMMON"; then
 227 PKG_CHECK_MODULES(OPENGLES20, glesv2 egl)
 228 fi
 229
 230 if test "x$enable_profile" = "xMOBILE"; then
 231 PKG_CHECK_MODULES(OPENGLES20, glesv2 egl)
 232 enable_assimp=no
 233 fi
 234
 235 if test "x$enable_profile" = "xLITE"; then
 236 PKG_CHECK_MODULES(OPENGLES20, gles20)
 237 fi
 238
 239 if test "x$enable_cxx03_abi" = "xyes"; then
 240 PKG_CHECK_MODULES(DALICORE, dali-core-cxx03)
 241 else
 242 PKG_CHECK_MODULES(DALICORE, dali-core)
 243 fi
 244
 245 if test "x$enable_profile" = "xWEARABLE"; then
 246 PKG_CHECK_MODULES(OPENGLES20, glesv2)
 247 PKG_CHECK_MODULES(SCREENCONNECTORPROVIDER, screen_connector_provider)
 248 PKG_CHECK_MODULES(APPFW_WATCH, capi-appfw-watch-application,
 249    [watch_available=yes], [watch_available=no] )
 250 PKG_CHECK_MODULES(APPCORE_WATCH, appcore-watch)
 251 if test "x$watch_available" = "xyes"; then
 252   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DAPPCORE_WATCH_AVAILABLE"
 253 fi
 254 fi
 255
 256 if test "x$enable_profile" = "xTV"; then
 257 PKG_CHECK_MODULES(OPENGLES20, glesv2)
 258 fi
 259
 260 if test "x$enable_profile" = "xIVI"; then
 261 PKG_CHECK_MODULES(OPENGLES20, glesv2)
 262 fi
 263
 264 if test "x$enable_profile" = "xUBUNTU"; then
 265 PKG_CHECK_MODULES(OPENGLES20, glesv2 egl)
 266 else
 267
 268 if test "x$enable_cxx03_abi" = "xyes"; then
 269  DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -D_GLIBCXX_USE_CXX11_ABI=0"
 270 fi
 271 PKG_CHECK_MODULES(DLOG, dlog)
 272 PKG_CHECK_MODULES(TTS, tts)
 273 PKG_CHECK_MODULES(VCONF, vconf)
 274
 275 if test "x$with_tizen_2_2_compatibility" = "xno"; then
 276 PKG_CHECK_MODULES(CAPI_SYSTEM_INFO, capi-system-info)
 277 PKG_CHECK_MODULES(CAPI_SYSTEM_SENSOR, capi-system-sensor, [ capi_system_sensor_support=yes ], [ capi_system_sensor_support=no ] )
 278
 279 if test "x$capi_system_sensor_support" = "xyes"; then
 280   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DCAPI_SYSTEM_SENSOR_SUPPORT"
 281 fi
 282
 283 fi
 284
 285 fi # ubuntu profile test
 286
 287 if test "x$enable_appfw" = "xyes"; then
 288 PKG_CHECK_MODULES(CAPI_SYSTEM_SYSTEM_SETTINGS, capi-system-system-settings)
 289 if test "x$enable_tizen_major_version" = "x3"; then
 290 PKG_CHECK_MODULES(CAPI_APPFW_APPLICATION, capi-appfw-application)
 291 PKG_CHECK_MODULES(ELEMENTARY, elementary)
 292 else
 293 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DWIDGET_AVAILABLE"
 294 PKG_CHECK_MODULES(BUNDLE, bundle)
 295 PKG_CHECK_MODULES(CAPI_APPFW_APPLICATION, appcore-ui)
 296 PKG_CHECK_MODULES(CAPI_APPFW_WIDGET_BASE, appcore-widget-base)
 297 PKG_CHECK_MODULES(CAPI_APPFW_COMMON, capi-appfw-app-common)
 298 PKG_CHECK_MODULES(CAPI_APPFW_CONTROL, capi-appfw-app-control)
 299 fi
 300 else
 301 PKG_CHECK_MODULES(ELEMENTARY, elementary)
 302 fi
 303
 304 # Using EFL api's for  WAYLAND AND X11 to run on ecore mainloop
 305 if test "x$enable_wayland" = "xyes"; then
 306 PKG_CHECK_MODULES(WAYLAND, [ecore-wayland egl wayland-egl wayland-client >= 1.2.0 xkbcommon libtbm],
 307                   [DALI_USE_ECORE_WAYLAND=1],
 308                   [DALI_USE_ECORE_WAYLAND=0])
 309
 310 else
 311 PKG_CHECK_MODULES(ECORE_X, [ecore-x x11-xcb],
 312                   [DALI_USE_ECORE_X11=1],
 313                   [DALI_USE_ECORE_X11=0])
 314 PKG_CHECK_MODULES(X11, [x11 x11-xcb],
 315                   [DALI_USE_X11=1],
 316                   [DALI_USE_X11=0])
 317 #PKG_CHECK_MODULES(X11_XCB, [x11-xcb],
 318 #                  [DALI_HAS_X11_XCB=1],
 319 #                  [DALI_HAS_X11_XCB=0])
 320 fi
 321
 322 # remove this when we update common repos
 323 # common profile currently does not have wayland extensions like xdg-shell
 324 if test "x$enable_wayland" = "xyes"; then
 325 if test "x$enable_profile" != "xCOMMON"; then
 326 PKG_CHECK_MODULES(WAYLAND_EXTENSION, xdg-shell-client text-client input-method-client)
 327 fi
 328 fi
 329 AM_CONDITIONAL([USE_ECORE_WAYLAND], [test "$DALI_USE_ECORE_WAYLAND" -eq 1])
 330
 331 if test x$DALI_DATA_RW_DIR != x; then
 332   dataReadWriteDir=$DALI_DATA_RW_DIR
 333 else
 334   dataReadWriteDir=${prefix}/share/dali/
 335 fi
 336
 337 if test x$DALI_DATA_RO_DIR != x; then
 338   dataReadOnlyDir=$DALI_DATA_RO_DIR
 339 else
 340   dataReadOnlyDir=${prefix}/share/dali/
 341 fi
 342
 343 if test x$TIZEN_PLATFORM_CONFIG_SUPPORTED != x; then
 344   tizenPlatformConfigSupported=$TIZEN_PLATFORM_CONFIG_SUPPORTED
 345 else
 346   tizenPlatformConfigSupported=0
 347 fi
 348
 349 if test x$FONT_CONFIGURATION_FILE != x; then
 350   fontConfigurationFile=$FONT_CONFIGURATION_FILE
 351 fi
 352
 353 # vulkan support, includes xlib platform dependency
 354 if test "x$enable_vulkan" != "xno"; then
 355     PKG_CHECK_MODULES(VULKAN, vulkan-${enable_vulkan}, AC_DEFINE(ENABLE_VULKAN, 1, [Vulkan available as package]),
 356                   [ AC_MSG_ERROR([Vulkan not available as a package]) ]
 357                   )
 358
 359     DALI_ADAPTOR_CFLAGS+=" ${VULKAN_CFLAGS} -DVULKAN_HPP_NO_EXCEPTIONS"
 360
 361     # due to a bug in nvidia driver x11-xcb library is required
 362     DALI_ADAPTOR_LDFLAGS+=${VULKAN_LIBS}
 363
 364     if test "x$DALI_HAS_X11_XCB" == "x1"; then
 365         echo "X11 libs: ${X11_XCB_LIBS}"
 366         DALI_ADAPTOR_LDFLAGS+=${X11_XCB_LIBS}
 367     fi
 368 fi
 369
 370 AM_CONDITIONAL([VULKAN_ENABLED], [test x$enable_vulkan != xno])
 371
 372 AC_SUBST(dataReadWriteDir)
 373 AC_SUBST(dataReadOnlyDir)
 374 AC_SUBST(DALI_ADAPTOR_CFLAGS)
 375 AC_SUBST(DALI_ADAPTOR_LDFLAGS)
 376 AC_SUBST(DALI_PROFILE_CFLAGS)
 377 AC_SUBST(fontConfigurationFile)
 378 AC_SUBST(tizenPlatformConfigSupported)
 379
 380 # Specify the include directory for development headers
 381 #devincludepath=${includedir}/dali/internal
 382 devincludepath=${includedir}
 383 AC_SUBST(devincludepath)
 384
 385 AC_CONFIG_FILES([Makefile])
 386
 387 if test "x$enable_cxx03_abi" = "xyes"; then
 388 AC_CONFIG_FILES([dali-adaptor-cxx03.pc dali-adaptor-integration-cxx03.pc])
 389 else
 390 AC_CONFIG_FILES([dali-adaptor.pc dali-adaptor-integration.pc])
 391 fi
 392
 393 if test "x$freetype_bitmap_support" = "xyes"; then
 394 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DFREETYPE_BITMAP_SUPPORT"
 395 fi
 396
 397 AC_OUTPUT
 398
 399
 400 echo "
 401 Configuration
 402 -------------
 403   Prefix:                           $prefix
 404   Debug Build:                      $enable_debug
 405   Trace Build:                      $enable_trace
 406   Compile flags:                    $DALI_ADAPTOR_CFLAGS
 407   Freetype bitmap support (Emoji):  $freetype_bitmap_support
 408   Profile:                          $enable_profile
 409   Data Dir (Read/Write):            $dataReadWriteDir
 410   Data Dir (Read Only):             $dataReadOnlyDir
 411   Tizen SDK 2.2 compatibility:      $with_tizen_2_2_compatibility
 412   EldBus:                           $eldbus_available
 413   Shader Binary Cache:              $enable_shaderbincache
 414   Ecore Version At Least 1.13.0     $ecore_imf_1_13
 415   Network logging enabled:          $enable_networklogging
 416   Font config file:                 $fontConfigurationFile
 417   Using Tizen APP FW libraries:     $enable_appfw
 418   OpenGL ES version:                $enable_gles
 419   Tizen Platform Config supported   $tizenPlatformConfigSupported
 420   Vulkan Support:                   ${enable_vulkan}"
 421
 422 if test "x$VULKAN_SDK" != "x"; then
 423     echo "  VulkanSDK:                        ${VULKAN_SDK}"
 424 fi
 425 echo ""