build/tizen/adaptor/configure.ac

   1 #
   2 # Copyright (c) 2017 Samsung Electronics Co., Ltd.
   3 #
   4 # Licensed under the Apache License, Version 2.0 (the "License");
   5 # you may not use this file except in compliance with the License.
   6 # You may obtain a copy of the License at
   7 #
   8 # http://www.apache.org/licenses/LICENSE-2.0
   9 #
  10 # Unless required by applicable law or agreed to in writing, software
  11 # distributed under the License is distributed on an "AS IS" BASIS,
  12 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  13 # See the License for the specific language governing permissions and
  14 # limitations under the License.
  15 #
  16
  17 m4_define([dali_version],[0.1.0])
  18 AC_INIT([dali], [dali_version])
  19 AM_INIT_AUTOMAKE([-Wall foreign])
  20
  21 AC_CONFIG_MACRO_DIR([m4])
  22
  23 AC_PROG_CXX
  24 AC_PROG_LIBTOOL
  25 AC_PROG_MKDIR_P
  26
  27 m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
  28
  29 LT_INIT
  30
  31 DALI_ADAPTOR_VERSION=dali_version
  32 AC_SUBST(DALI_ADAPTOR_VERSION)
  33
  34 FREETYPE_REQUIRED=9.16.3
  35 # 17.1.11 = Freetype version 2.5.2
  36 FREETYPE_BITMAP_SUPPORT_VERSION=17.1.11
  37
  38 PKG_CHECK_MODULES(DALICORE, dali-core)
  39 PKG_CHECK_MODULES(EXIF, libexif)
  40 PKG_CHECK_MODULES(FREETYPE, [freetype2 >= $FREETYPE_REQUIRED])
  41 PKG_CHECK_MODULES(FREETYPE_BITMAP_SUPPORT, [freetype2 >= $FREETYPE_BITMAP_SUPPORT_VERSION], [ freetype_bitmap_support=yes  ], [ freetype_bitmap_support=no ] )
  42 PKG_CHECK_MODULES(FONTCONFIG, fontconfig)
  43 PKG_CHECK_MODULES(PNG, libpng)
  44 PKG_CHECK_MODULES(LIBEXIF, libexif)
  45 PKG_CHECK_MODULES(LIBDRM, libdrm)
  46 PKG_CHECK_MODULES(LIBCURL, libcurl)
  47 PKG_CHECK_MODULES(HARFBUZZ, harfbuzz)
  48 PKG_CHECK_MODULES(FRIBIDI, fribidi)
  49 PKG_CHECK_MODULES(EVAS, evas)
  50 PKG_CHECK_MODULES(TTRACE,  ttrace, AC_DEFINE(ENABLE_TTRACE, 1, [ttrace available]),
  51                   [ AC_MSG_NOTICE([Tizen Trace not avaiable]) ]
  52                   )
  53
  54 # Currently, dali-adaptor always requires EFL on all platforms.
  55 # (on Wayland & X11, on Tizen devices & Ubuntu PC).
  56 PKG_CHECK_MODULES(ECORE, ecore)
  57 PKG_CHECK_MODULES(ECORE_IPC, ecore-ipc)
  58 PKG_CHECK_MODULES(ECORE_IMF, [ecore-imf >= 1.13], [ecore_imf_1_13=yes], [ecore_imf_1_13=no])
  59 # Check for EldBus.h in ECore
  60 PKG_CHECK_MODULES(ELDBUS, eldbus, [ eldbus_available=yes ],  [ eldbus_available=no ] )
  61
  62 DALI_ELDBUS_AVAILABLE=
  63 if test "x$eldbus_available" = "xyes"; then
  64   DALI_ELDBUS_AVAILABLE=true
  65   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDALI_ELDBUS_AVAILABLE "
  66 fi
  67 AC_SUBST(DALI_ELDBUS_AVAILABLE)
  68
  69
  70 PKG_CHECK_MODULES(TPKP_CURL, tpkp-curl, [ tpkp_curl_available=yes ], [ tpkp_curl_available=no ] )
  71
  72 if test "x$tpkp_curl_available" = "xyes"; then
  73   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DTPK_CURL_ENABLED "
  74 fi
  75
  76 PKG_CHECK_MODULES(UTILX, utilX, [ utilx_available=yes ], [ utilx_available=no ] )
  77
  78 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DPLATFORM_TIZEN"
  79
  80 AC_ARG_ENABLE(exportall,
  81               [AC_HELP_STRING([--enable-exportall],
  82                               [enables the exporting of all the symbols in the library])],
  83               [enable_exportall=yes],
  84               [enable_exportall=no])
  85
  86 AC_ARG_ENABLE([debug],
  87               [AC_HELP_STRING([--enable-debug],
  88                               [Turns on debugging])],
  89               [enable_debug=$enableval],
  90               [enable_debug=no])
  91
  92 AC_ARG_ENABLE(shaderbincache,
  93               [AC_HELP_STRING([--enable-shaderbincache],
  94                               [enables shader binary cache])],
  95               [enable_shaderbincache=$enableval],
  96               [enable_shaderbincache=DISABLE])
  97
  98 AC_ARG_ENABLE(networklogging,
  99               [AC_HELP_STRING([--enable-networklogging],
 100                               [enables network for debug tool])],
 101               [enable_networklogging=$enableval],
 102               [enable_networklogging=no])
 103
 104
 105 if test "x$enable_debug" = "xyes"; then
 106   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDEBUG_ENABLED"
 107 fi
 108
 109 if test "x$enable_debug" = "xno" -a "x$enable_exportall" = "xno"; then
 110   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -fvisibility=hidden -DHIDE_DALI_INTERNALS"
 111 fi
 112
 113 if test "x$enable_shaderbincache" = "xENABLE"; then
 114   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DSHADERBIN_CACHE_ENABLED"
 115 fi
 116
 117 if test "x$enable_networklogging" = "xyes"; then
 118   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DNETWORK_LOGGING_ENABLED"
 119 fi
 120
 121 # If Ecore IMF version is greater than 1.13, then some structures are different
 122 if test "x$ecore_imf_1_13" = "xyes"; then
 123   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DECORE_IMF_1_13"
 124 fi
 125
 126 AC_ARG_ENABLE([gles],
 127               [AC_HELP_STRING([--enable-gles],
 128                               [Specify the OpenGL ES version for backwards compatibility])],
 129               [enable_gles=$enableval],
 130               [enable_gles=20])
 131
 132 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDALI_GLES_VERSION=${enable_gles}"
 133
 134 # Currently, dali-adaptor requires appfw on Tizen
 135 # and does not require it on Ubuntu.
 136 # So we should be able to enable/disable this option for dali-adaptor.
 137 AC_ARG_ENABLE([appfw],
 138               [AC_HELP_STRING([--enable-appfw],
 139                               [Builds with Tizen App framework libraries, off by default])],
 140               [enable_appfw=$enableval],
 141               [enable_appfw=no])
 142
 143 # Option to allow building with Tizen SDK 2.2
 144 AC_ARG_WITH([tizen-2-2-compatibility],
 145             [AC_HELP_STRING([--with-tizen-2-2-compatibility],
 146                             [Use Tizen SDK 2.2 compatibility])],
 147             [with_tizen_2_2_compatibility=$withval],
 148             [with_tizen_2_2_compatibility=no])
 149
 150 # Tizen Profile options
 151 AC_ARG_ENABLE([profile],
 152               [AC_HELP_STRING([--enable-profile=COMMON,MOBILE,WEARABLE,TV,IVI,UBUNTU],
 153                             [Select the variant of tizen])],
 154               [enable_profile=$enableval],
 155               [enable_profile=UBUNTU])
 156
 157 # Tizen Major version
 158 AC_ARG_ENABLE([tizen-major-version],
 159               [AC_HELP_STRING([--enable-tizen-major-version],
 160                               [Specify the Tizen Major version for backwards compatibility])],
 161               [enable-tizen-major-version=$enableval],
 162               [enable-tizen-major-version=0])
 163
 164 # Ensure valid profile selected
 165 if test "x$enable_profile" != "xCOMMON" -a "x$enable_profile" != "xMOBILE" -a "x$enable_profile" != "xWEARABLE" -a "x$enable_profile" != "xTV" -a "x$enable_profile" != "xIVI" -a "x$enable_profile" != "xUBUNTU"; then
 166   AC_MSG_ERROR([$enable_profile is an invalid profile])
 167 fi
 168
 169 AC_ARG_ENABLE(wayland,
 170               [  --enable-wayland       Build on Wayland],
 171               enable_wayland=yes,
 172               enable_wayland=no)
 173
 174 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDALI_PROFILE_${enable_profile}"
 175 DALI_PROFILE_CFLAGS=" -DDALI_PROFILE_${enable_profile}"
 176 AM_CONDITIONAL([COMMON_PROFILE], [test x$enable_profile = xCOMMON])
 177 AM_CONDITIONAL([MOBILE_PROFILE], [test x$enable_profile = xMOBILE])
 178 AM_CONDITIONAL([WEARABLE_PROFILE], [test x$enable_profile = xWEARABLE])
 179 AM_CONDITIONAL([TV_PROFILE], [test x$enable_profile = xTV])
 180 AM_CONDITIONAL([IVI_PROFILE], [test x$enable_profile = xIVI])
 181 AM_CONDITIONAL([UBUNTU_PROFILE], [test x$enable_profile = xUBUNTU])
 182 AM_CONDITIONAL([WAYLAND], [test x$enable_wayland = xyes])
 183 AM_CONDITIONAL([USE_APPFW], [test x$enable_appfw = xyes])
 184 AM_CONDITIONAL([USE_APPFW_EFL_BASE], [test x$enable_tizen_major_version = x3])
 185
 186 # Platforms with highp shader support can use vector based text
 187 AM_CONDITIONAL([ENABLE_VECTOR_BASED_TEXT_RENDERING], [test x$enable_profile = xUBUNTU])
 188
 189 AM_CONDITIONAL([ENABLE_NETWORK_LOGGING], [test x$enable_networklogging = xyes])
 190
 191 # Platforms should either enable features or remove them, they
 192 # should not disable features. This allows the developer to override
 193 # features through the command line.
 194
 195 if test "x$enable_profile" = "xCOMMON"; then
 196 PKG_CHECK_MODULES(OPENGLES20, glesv2 egl)
 197 fi
 198
 199 if test "x$enable_profile" = "xMOBILE"; then
 200 PKG_CHECK_MODULES(OPENGLES20, glesv2 egl)
 201 enable_assimp=no
 202 fi
 203
 204 if test "x$enable_profile" = "xLITE"; then
 205 PKG_CHECK_MODULES(OPENGLES20, gles20)
 206 fi
 207
 208 if test "x$enable_profile" = "xWEARABLE"; then
 209 PKG_CHECK_MODULES(OPENGLES20, glesv2)
 210 PKG_CHECK_MODULES(SCREENCONNECTORPROVIDER, screen_connector_provider)
 211 PKG_CHECK_MODULES(APPFW_WATCH, capi-appfw-watch-application,
 212    [watch_available=yes], [watch_available=no] )
 213 PKG_CHECK_MODULES(APPCORE_WATCH, appcore-watch)
 214 if test "x$watch_available" = "xyes"; then
 215   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DAPPCORE_WATCH_AVAILABLE"
 216 fi
 217 fi
 218
 219 if test "x$enable_profile" = "xTV"; then
 220 PKG_CHECK_MODULES(OPENGLES20, glesv2)
 221 fi
 222
 223 if test "x$enable_profile" = "xIVI"; then
 224 PKG_CHECK_MODULES(OPENGLES20, glesv2)
 225 fi
 226
 227 if test "x$enable_profile" = "xUBUNTU"; then
 228 PKG_CHECK_MODULES(OPENGLES20, glesv2 egl)
 229 else
 230
 231 PKG_CHECK_MODULES(DLOG, dlog)
 232 PKG_CHECK_MODULES(TTS, tts)
 233 PKG_CHECK_MODULES(VCONF, vconf)
 234
 235 if test "x$with_tizen_2_2_compatibility" = "xno"; then
 236 PKG_CHECK_MODULES(CAPI_SYSTEM_INFO, capi-system-info)
 237 PKG_CHECK_MODULES(CAPI_SYSTEM_SENSOR, capi-system-sensor, [ capi_system_sensor_support=yes ], [ capi_system_sensor_support=no ] )
 238
 239 if test "x$capi_system_sensor_support" = "xyes"; then
 240   DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DCAPI_SYSTEM_SENSOR_SUPPORT"
 241 fi
 242
 243 fi
 244
 245 fi # ubuntu profile test
 246
 247 if test "x$enable_appfw" = "xyes"; then
 248 PKG_CHECK_MODULES(CAPI_SYSTEM_SYSTEM_SETTINGS, capi-system-system-settings)
 249 if test "x$enable_tizen_major_version" = "x3"; then
 250 PKG_CHECK_MODULES(CAPI_APPFW_APPLICATION, capi-appfw-application)
 251 PKG_CHECK_MODULES(ELEMENTARY, elementary)
 252 else
 253 PKG_CHECK_MODULES(CAPI_APPFW_APPLICATION, appcore-ui)
 254 PKG_CHECK_MODULES(CAPI_APPFW_COMMON, capi-appfw-app-common)
 255 PKG_CHECK_MODULES(CAPI_APPFW_CONTROL, capi-appfw-app-control)
 256 fi
 257 else
 258 PKG_CHECK_MODULES(ELEMENTARY, elementary)
 259 fi
 260
 261 # Using EFL api's for  WAYLAND AND X11 to run on ecore mainloop
 262 if test "x$enable_wayland" = "xyes"; then
 263 PKG_CHECK_MODULES(WAYLAND, [ecore-wayland egl wayland-egl wayland-client >= 1.2.0 xkbcommon libtbm],
 264                   [DALI_USE_ECORE_WAYLAND=1],
 265                   [DALI_USE_ECORE_WAYLAND=0])
 266
 267 else
 268 PKG_CHECK_MODULES(ECORE_X, [ecore-x],
 269                   [DALI_USE_ECORE_X11=1],
 270                   [DALI_USE_ECORE_X11=0])
 271 PKG_CHECK_MODULES(X11, [x11],
 272                   [DALI_USE_X11=1],
 273                   [DALI_USE_X11=0])
 274 fi
 275
 276 # remove this when we update common repos
 277 # common profile currently does not have wayland extensions like xdg-shell
 278 if test "x$enable_wayland" = "xyes"; then
 279 if test "x$enable_profile" != "xCOMMON"; then
 280 PKG_CHECK_MODULES(WAYLAND_EXTENSION, xdg-shell-client text-client input-method-client)
 281 fi
 282 fi
 283 AM_CONDITIONAL([USE_ECORE_WAYLAND], [test "$DALI_USE_ECORE_WAYLAND" -eq 1])
 284
 285 if test x$DALI_DATA_RW_DIR != x; then
 286   dataReadWriteDir=$DALI_DATA_RW_DIR
 287 else
 288   dataReadWriteDir=${prefix}/share/dali/
 289 fi
 290
 291 if test x$DALI_DATA_RO_DIR != x; then
 292   dataReadOnlyDir=$DALI_DATA_RO_DIR
 293 else
 294   dataReadOnlyDir=${prefix}/share/dali/
 295 fi
 296
 297 if test x$TIZEN_PLATFORM_CONFIG_SUPPORTED != x; then
 298   tizenPlatformConfigSupported=$TIZEN_PLATFORM_CONFIG_SUPPORTED
 299 else
 300   tizenPlatformConfigSupported=0
 301 fi
 302
 303 if test x$FONT_CONFIGURATION_FILE != x; then
 304   fontConfigurationFile=$FONT_CONFIGURATION_FILE
 305 fi
 306
 307 AC_SUBST(dataReadWriteDir)
 308 AC_SUBST(dataReadOnlyDir)
 309 AC_SUBST(DALI_ADAPTOR_CFLAGS)
 310 AC_SUBST(DALI_PROFILE_CFLAGS)
 311 AC_SUBST(fontConfigurationFile)
 312 AC_SUBST(tizenPlatformConfigSupported)
 313
 314 # Specify the include directory for development headers
 315 #devincludepath=${includedir}/dali/internal
 316 devincludepath=${includedir}
 317 AC_SUBST(devincludepath)
 318
 319 AC_CONFIG_FILES([
 320  Makefile
 321  dali-adaptor.pc
 322  dali-adaptor-integration.pc
 323 ])
 324
 325 if test "x$freetype_bitmap_support" = "xyes"; then
 326 DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DFREETYPE_BITMAP_SUPPORT"
 327 fi
 328
 329 AC_OUTPUT
 330
 331
 332 echo "
 333 Configuration
 334 -------------
 335   Prefix:                           $prefix
 336   Debug Build:                      $enable_debug
 337   Compile flags:                    $DALI_ADAPTOR_CFLAGS
 338   Freetype bitmap support (Emoji):  $freetype_bitmap_support
 339   Profile:                          $enable_profile
 340   Data Dir (Read/Write):            $dataReadWriteDir
 341   Data Dir (Read Only):             $dataReadOnlyDir
 342   Tizen SDK 2.2 compatibility:      $with_tizen_2_2_compatibility
 343   EldBus:                           $eldbus_available
 344   Shader Binary Cache:              $enable_shaderbincache
 345   Ecore Version At Least 1.13.0     $ecore_imf_1_13
 346   Network logging enabled:          $enable_networklogging
 347   Font config file:                 $fontConfigurationFile
 348   Using Tizen APP FW libraries:     $enable_appfw
 349   OpenGL ES version:                $enable_gles
 350   Tizen Platform Config supported   $tizenPlatformConfigSupported
 351 "