* limitations under the License.
*/
-#ifndef __PERIPHERAL_IO_H__
-#define __PERIPHERAL_IO_H__
+#ifndef __TIZEN_SYSTEM_PERIPHERAL_IO_H__
+#define __TIZEN_SYSTEM_PERIPHERAL_IO_H__
#include <stdint.h>
#include <tizen.h>
#endif
/**
+ * @addtogroup CAPI_SYSTEM_PERIPHERAL_IO_MODULE
+ * @{
+ */
+
+/**
* @file peripheral_io.h
- * @brief This file contains the peripheral-io API
+ * @brief This file contains the peripheral-io API.
*/
/**
* @brief Enumeration for peripheral-io error.
- * @since_tizen
+ * @since_tizen 4.0
*/
typedef enum {
PERIPHERAL_ERROR_NONE = TIZEN_ERROR_NONE, /**< Successful */
PERIPHERAL_ERROR_IO_ERROR = TIZEN_ERROR_IO_ERROR, /**< I/O error */
PERIPHERAL_ERROR_NO_DEVICE = TIZEN_ERROR_NO_SUCH_DEVICE, /**< No such device */
+ PERIPHERAL_ERROR_TRY_AGAIN = TIZEN_ERROR_TRY_AGAIN, /**< Try again */
PERIPHERAL_ERROR_OUT_OF_MEMORY = TIZEN_ERROR_OUT_OF_MEMORY, /**< Out of memory */
PERIPHERAL_ERROR_PERMISSION_DENIED = TIZEN_ERROR_PERMISSION_DENIED, /**< Permission denied */
PERIPHERAL_ERROR_RESOURCE_BUSY = TIZEN_ERROR_RESOURCE_BUSY, /**< Device or resource busy */
PERIPHERAL_ERROR_INVALID_PARAMETER = TIZEN_ERROR_INVALID_PARAMETER, /**< Invalid parameter */
- PERIPHERAL_ERROR_NO_DATA = TIZEN_ERROR_NO_DATA, /**< No data available */
- PERIPHERAL_ERROR_INVALID_OPERATION = TIZEN_ERROR_INVALID_OPERATION, /**< Function not implemented */
- PERIPHERAL_ERROR_TIMED_OUT = TIZEN_ERROR_TIMED_OUT, /**< Time out */
PERIPHERAL_ERROR_NOT_SUPPORTED = TIZEN_ERROR_NOT_SUPPORTED, /**< Not supported */
PERIPHERAL_ERROR_UNKNOWN = TIZEN_ERROR_UNKNOWN, /**< Unknown error */
} peripheral_error_e;
/**
- * @addtogroup CAPI_SYSTEM_PERIPHERAL_GPIO_MODULE
+* @}
+*/
+
+/**
+ * @addtogroup CAPI_SYSTEM_PERIPHERAL_IO_GPIO_MODULE
* @{
*/
/**
- * @brief Enumeration of gpio direction
+ * @brief Enumeration of GPIO direction options.
+ * @since_tizen 4.0
*/
typedef enum {
- PERIPHERAL_GPIO_DIRECTION_IN = 0, /**< Input Mode */
- PERIPHERAL_GPIO_DIRECTION_OUT, /**< Output mode with low value */
- PERIPHERAL_GPIO_DIRECTION_OUT_LOW = PERIPHERAL_GPIO_DIRECTION_OUT, /**< Same as above */
- PERIPHERAL_GPIO_DIRECTION_OUT_HIGH, /**< Output mode with high value */
+ PERIPHERAL_GPIO_DIRECTION_IN = 0, /**< Input Mode */
+ PERIPHERAL_GPIO_DIRECTION_OUT_INITIALLY_HIGH, /**< Output mode with high value */
+ PERIPHERAL_GPIO_DIRECTION_OUT_INITIALLY_LOW, /**< Output mode with low value */
} peripheral_gpio_direction_e;
/**
- * @brief Enumeration of edge type for gpio interrupt
+ * @brief Enumeration of edge types for the GPIO interrupt.
+ * @since_tizen 4.0
*/
typedef enum {
- PERIPHERAL_GPIO_EDGE_NONE = 0, /**< No interrupt on Gpio */
+ PERIPHERAL_GPIO_EDGE_NONE = 0, /**< No interrupt on GPIO */
PERIPHERAL_GPIO_EDGE_RISING, /**< Interrupt on rising only */
PERIPHERAL_GPIO_EDGE_FALLING, /**< Interrupt on falling only */
PERIPHERAL_GPIO_EDGE_BOTH, /**< Interrupt on rising & falling */
} peripheral_gpio_edge_e;
/**
- * @brief Gpio isr callback data delivered via gpio_isr_cb().
- * @details A gpio isr callback data is delivered as a structure, which contains
- * the pin number, the pin value, and the timestamp of the gpio interrupt
- * in microseconds.
+ * @brief The handle of a GPIO pin.
* @since_tizen 4.0
*/
-typedef struct {
- int pin;
- int value;
- unsigned long long timestamp;
-} gpio_isr_cb_s;
+typedef struct _peripheral_gpio_s *peripheral_gpio_h;
/**
- * @brief The handle to the gpio pin
- * @since_tizen 4.0
- */
-typedef struct _peripheral_gpio_s* peripheral_gpio_h;
-
-/**
- * @brief Initializes(export) gpio pin and creates gpio handle.
+ * @platform
+ * @brief Opens a GPIO pin.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
+ * @remarks @a gpio should be released with peripheral_gpio_close()
*
- * @param[in] gpio_pin The gpio pin number
- * @param[out] gpio The gpio handle is created on success
+ * @param[in] gpio_pin The GPIO pin number
+ * @param[out] gpio The GPIO handle is created on success
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
* @retval #PERIPHERAL_ERROR_OUT_OF_MEMORY Memory allocation failed
* @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #PERIPHERAL_ERROR_RESOURCE_BUSY Device is in use
+ * @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
*
- * @see peripheral_gpio_close()
+ * @post peripheral_gpio_close()
*/
int peripheral_gpio_open(int gpio_pin, peripheral_gpio_h *gpio);
/**
- * @brief Releases the gpio handle and finalize(unexport) the gpio pin.
+ * @platform
+ * @brief Closes a GPIO pin.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] gpio The handle to the gpio pin to release
+ * @param[in] gpio The GPIO handle
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
*
- * @see peripheral_gpio_open()
+ * @pre peripheral_gpio_open()
*/
int peripheral_gpio_close(peripheral_gpio_h gpio);
/**
- * @brief Gets direction of the gpio.
+ * @platform
+ * @brief Sets the GPIO direction.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] gpio The handle to the gpio pin
- * @param[out] value The direction(value) type of the gpio
+ * @param[in] gpio The GPIO handle
+ * @param[in] direction The direction of the GPIO pin
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
*
- * @see peripheral_gpio_set_direction()
- */
-int peripheral_gpio_get_direction(peripheral_gpio_h gpio, peripheral_gpio_direction_e *direction);
-
-/**
- * @brief Sets direction of the gpio pin.
- * @since_tizen 4.0
- *
- * @param[in] gpio The handle to the gpio pin to set
- * @param[in] direction Direction(value) type of the gpio pin
- *
- * @return 0 on success, otherwise a negative error value
- * @retval #PERIPHERAL_ERROR_NONE Successful
- * @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
- * @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
+ * @see peripheral_gpio_direction_e
*/
int peripheral_gpio_set_direction(peripheral_gpio_h gpio, peripheral_gpio_direction_e direction);
/**
- * @brief Reads value of the gpio.
+ * @platform
+ * @brief Sets the GPIO edge mode.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] gpio The handle to the gpio pin
- * @param[out] value The value of the gpio (zero or non-zero)
+ * @param[in] gpio The GPIO handle
+ * @param[in] edge The edge mode of the GPIO pin
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
*
- * @see peripheral_gpio_write()
+ * @see peripheral_gpio_edge_e
*/
-int peripheral_gpio_read(peripheral_gpio_h gpio, int *value);
+int peripheral_gpio_set_edge_mode(peripheral_gpio_h gpio, peripheral_gpio_edge_e edge);
/**
- * @brief Writes value to the gpio.
+ * @platform
+ * @brief The GPIO interrupted callback called when the GPIO interrupt is triggered.
* @since_tizen 4.0
*
- * @param[in] gpio The handle to the gpio pin
- * @param[in] value Value to be written to the gpio (muse be zero or non-zero)
- *
- * @return 0 on success, otherwise a negative error value
- * @retval #PERIPHERAL_ERROR_NONE Successful
- * @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
- * @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
+ * @param[in] gpio The GPIO handle
+ * @param[in] error The GPIO error
+ * @param[in] user_data The user data passed from the callback registration function
*
- * @see peripheral_gpio_read()
+ * @see peripheral_gpio_set_interrupted_cb()
*/
-int peripheral_gpio_write(peripheral_gpio_h gpio, int value);
+typedef void(*peripheral_gpio_interrupted_cb)(peripheral_gpio_h gpio, peripheral_error_e error, void *user_data);
/**
- * @brief Gets the edge mode of the gpio.
+ * @platform
+ * @brief Sets the GPIO interrupted callback to be invoked when the GPIO interrupt is triggered.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] gpio The handle to the gpio pin
- * @param[out] gpio_pin The edge mode of the gpio
+ * @param[in] gpio The GPIO handle
+ * @param[in] callback The GPIO interrupted callback function to set
+ * @param[in] user_data The user data to be passed to the callback function
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
- * @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
*
+ * @post peripheral_gpio_unset_interrupted_cb()
* @see peripheral_gpio_set_edge_mode()
*/
-int peripheral_gpio_get_edge_mode(peripheral_gpio_h gpio, peripheral_gpio_edge_e *edge);
+int peripheral_gpio_set_interrupted_cb(peripheral_gpio_h gpio, peripheral_gpio_interrupted_cb callback, void *user_data);
/**
- * @brief Sets the edge mode of the gpio pin.
+ * @platform
+ * @brief Unsets the GPIO interrupted callback.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] gpio The handle to the gpio pin to set
- * @param[in] edge The edge mode of the gpio pin
+ * @param[in] gpio The GPIO handle
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
- * @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
- *
- * @see peripheral_gpio_get_edge_mode()
- */
-int peripheral_gpio_set_edge_mode(peripheral_gpio_h gpio, peripheral_gpio_edge_e edge);
-
-/**
- * @brief Called when the gpio interrupt is triggered.
- * @since_tizen 4.0
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
*
- * @param[in] data The gpio isr callback data
- * @param[in] user_data The user data passed from the callback registration function
- *
- * @see peripheral_gpio_register_cb()
- * @see peripheral_gpio_unregister_cb()
+ * @pre peripheral_gpio_set_interrupted_cb()
*/
-typedef void(*gpio_isr_cb)(gpio_isr_cb_s *data, void *user_data);
+int peripheral_gpio_unset_interrupted_cb(peripheral_gpio_h gpio);
/**
- * @brief Registers a callback function to be invoked when the gpio interrupt is triggered.
+ * @platform
+ * @brief Gets the current value of the GPIO pin.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] gpio The handle to the gpio pin to set
- * @param[in] edge The edge type of the gpio pin
- * @param[in] callback The callback function to register
- * @param[in] user_data The user data to be passed to the callback function
+ * @param[in] gpio The GPIO handle
+ * @param[out] value The value to get
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
+ * @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
+ * @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
*
- * @see peripheral_gpio_set_edge_mode()
- * @see peripheral_gpio_unregister_cb()
+ * @see peripheral_gpio_write()
*/
-int peripheral_gpio_register_cb(peripheral_gpio_h gpio, gpio_isr_cb callback, void *user_data);
+int peripheral_gpio_read(peripheral_gpio_h gpio, uint32_t *value);
/**
- * @brief Unregisters the callback function for the gpio handler.
+ * @platform
+ * @brief Sets the value of the GPIO pin.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] gpio The handle to the gpio pin
+ * @param[in] gpio The GPIO handle
+ * @param[in] value The value to set (must be 0 or 1)
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
+ * @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
+ * @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
*
- * @see peripheral_gpio_register_cb()
- */
-int peripheral_gpio_unregister_cb(peripheral_gpio_h gpio);
-
-/**
- * @brief Gets pin number of the gpio handle.
- * @since_tizen 4.0
- *
- * @param[in] gpio The handle to the gpio pin
- * @param[out] gpio_pin The pin number of the gpio
- *
- * @return 0 on success, otherwise a negative error value
- * @retval #PERIPHERAL_ERROR_NONE Successful
- * @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @see peripheral_gpio_read()
*/
-int peripheral_gpio_get_pin(peripheral_gpio_h gpio, int *gpio_pin);
+int peripheral_gpio_write(peripheral_gpio_h gpio, uint32_t value);
/**
* @}
*/
/**
- * @addtogroup CAPI_SYSTEM_PERIPHERAL_I2C_MODULE
+ * @addtogroup CAPI_SYSTEM_PERIPHERAL_IO_I2C_MODULE
* @{
*/
/**
- * @brief The handle to the i2c device
+ * @brief The handle of the I2C slave device.
* @since_tizen 4.0
*/
typedef struct _peripheral_i2c_s *peripheral_i2c_h;
/**
- * @brief Initializes i2c communication and creates i2c handle.
+ * @platform
+ * @brief Opens an I2C slave device.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
+ * @remarks @a i2c should be released with peripheral_i2c_close()
*
- * @param[in] bus The i2c bus number that the slave device is connected
+ * @param[in] bus The I2C bus number that the slave device is connected
* @param[in] address The address of the slave device
- * @param[out] i2c The i2c handle is created on success
+ * @param[out] i2c The I2C handle is created on success
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
* @retval #PERIPHERAL_ERROR_OUT_OF_MEMORY Memory allocation failed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #PERIPHERAL_ERROR_RESOURCE_BUSY Device is in use
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
*
- * @see peripheral_i2c_close()
+ * @post peripheral_i2c_close()
*/
int peripheral_i2c_open(int bus, int address, peripheral_i2c_h *i2c);
/**
- * @brief Destory the i2c handle and release the communication.
+ * @platform
+ * @brief Closes an I2C slave device.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] i2c The i2c handle
+ * @param[in] i2c The I2C handle
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
*
- * @see peripheral_i2c_open()
+ * @pre peripheral_i2c_open()
*/
int peripheral_i2c_close(peripheral_i2c_h i2c);
/**
- * @brief Reads data from the i2c slave device.
+ * @platform
+ * @brief Reads the bytes data from the I2C slave device.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] i2c The handle to the i2c device
- * @param[out] data The address of data buffer to read
+ * @param[in] i2c The I2C handle
+ * @param[out] data The data buffer to read
* @param[in] length The size of data buffer (in bytes)
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
+ *
+ * @see peripheral_i2c_write()
*/
-int peripheral_i2c_read(peripheral_i2c_h i2c, uint8_t *data, int length);
+int peripheral_i2c_read(peripheral_i2c_h i2c, uint8_t *data, uint32_t length);
/**
- * @brief Write data to the i2c slave device.
+ * @platform
+ * @brief Writes the bytes data to the I2C slave device.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] i2c The handle to the i2c device
- * @param[in] data The address of data buffer to write
+ * @param[in] i2c The I2C handle
+ * @param[in] data The data buffer to write
* @param[in] length The size of data buffer (in bytes)
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- */
-int peripheral_i2c_write(peripheral_i2c_h i2c, uint8_t *data, int length);
-
-/**
- * @brief Reads single byte data from the i2c slave device.
- * @since_tizen 4.0
*
- * @param[in] i2c The handle to the i2c device
- * @param[out] data The address of data buffer to read
- *
- * @return 0 on success, otherwise a negative error value
- * @retval #PERIPHERAL_ERROR_NONE Successful
- * @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
- * @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
+ * @see peripheral_i2c_read()
*/
-int peripheral_i2c_read_byte(peripheral_i2c_h i2c, uint8_t *data);
+int peripheral_i2c_write(peripheral_i2c_h i2c, uint8_t *data, uint32_t length);
/**
- * @brief Write single byte data to the i2c slave device.
+ * @platform
+ * @brief Reads single byte data from the register of the I2C slave device.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] i2c The handle to the i2c device
- * @param[in] data The byte value to write
+ * @param[in] i2c The I2C handle
+ * @param[in] reg The register address of the I2C slave device to read
+ * @param[out] data The single byte data to read
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- */
-int peripheral_i2c_write_byte(peripheral_i2c_h i2c, uint8_t data);
-
-/**
- * @brief Reads byte data from the register of i2c slave device.
- * @since_tizen 4.0
*
- * @param[in] i2c The handle to the i2c device
- * @param[in] address The register address of the i2c slave device to read
- * @param[out] data The byte output of slave device(register value)
- *
- * @return 0 on success, otherwise a negative error value
- * @retval #PERIPHERAL_ERROR_NONE Successful
- * @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
- * @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
+ * @see peripheral_i2c_write_register_byte()
*/
-int peripheral_i2c_read_register_byte(peripheral_i2c_h i2c, uint8_t address, uint8_t *data);
+int peripheral_i2c_read_register_byte(peripheral_i2c_h i2c, uint8_t reg, uint8_t *data);
/**
- * @brief Write byte data to the register of i2c slave device.
+ * @platform
+ * @brief Writes single byte data to the register of the I2C slave device.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] i2c The handle to the i2c device
- * @param[in] address The register address of the i2c slave device to write
- * @param[in] data The byte value to write
+ * @param[in] i2c The I2C handle
+ * @param[in] reg The register address of the I2C slave device to write
+ * @param[in] data The single byte data to write
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
+ *
+ * @see peripheral_i2c_read_register_byte()
*/
-int peripheral_i2c_write_register_byte(peripheral_i2c_h i2c, uint8_t address, uint8_t data);
+int peripheral_i2c_write_register_byte(peripheral_i2c_h i2c, uint8_t reg, uint8_t data);
/**
- * @brief Reads word data from the register of i2c slave device.
+ * @platform
+ * @brief Reads word data from the register of the I2C slave device.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] i2c The handle to the i2c device
- * @param[in] address The register address of the i2c slave device to read
- * @param[out] data The word output(2 bytes) of slave device(register value)
+ * @param[in] i2c The I2C handle
+ * @param[in] reg The register address of the I2C slave device to read
+ * @param[out] data The word(2 bytes) data to read
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
+ *
+ * @see peripheral_i2c_write_register_word()
*/
-int peripheral_i2c_read_register_word(peripheral_i2c_h i2c, uint8_t address, uint16_t *data);
+int peripheral_i2c_read_register_word(peripheral_i2c_h i2c, uint8_t reg, uint16_t *data);
/**
- * @brief Write byte data to the register of i2c slave device.
+ * @platform
+ * @brief Writes word data to the register of the I2C slave device.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] i2c The handle to the i2c device
- * @param[in] address The register address of the i2c slave device to write
- * @param[in] data The word(2 bytes) value to write
+ * @param[in] i2c The I2C handle
+ * @param[in] reg The register address of the I2C slave device to write
+ * @param[in] data The word(2 bytes) data to write
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
+ *
+ * @see peripheral_i2c_read_register_word()
*/
-int peripheral_i2c_write_register_word(peripheral_i2c_h i2c, uint8_t address, uint16_t data);
+int peripheral_i2c_write_register_word(peripheral_i2c_h i2c, uint8_t reg, uint16_t data);
/**
* @}
*/
/**
- * @addtogroup CAPI_SYSTEM_PERIPHERAL_PWM_MODULE
+ * @addtogroup CAPI_SYSTEM_PERIPHERAL_IO_PWM_MODULE
* @{
*/
/**
- * @brief The handle to the pwm device
+ * @brief The handle of the PWM device.
* @since_tizen 4.0
*/
typedef struct _peripheral_pwm_s *peripheral_pwm_h;
/**
* @brief Enumeration for Polarity.
+ * @since_tizen 4.0
*/
typedef enum {
- PERIPHERAL_PWM_POLARITY_NORMAL = 0,
- PERIPHERAL_PWM_POLARITY_INVERSED,
+ PERIPHERAL_PWM_POLARITY_ACTIVE_HIGH = 0, /**< PWM signal start in the active high state (Normal) */
+ PERIPHERAL_PWM_POLARITY_ACTIVE_LOW, /**< PWM signal start in the active low state (Inversed) */
} peripheral_pwm_polarity_e;
/**
- * @brief Initializes(export) pwm device and creates pwm handle.
+ * @platform
+ * @brief Opens the PWM pin.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
+ * @remarks @a pwm should be released with peripheral_pwm_close()
*
- * @param[in] device The pwm chip number
- * @param[in] channel The pwm channel number to control
- * @param[out] pwm The pwm handle is created on success
+ * @param[in] chip The PWM chip number
+ * @param[in] pin The PWM pin(channel) number to control
+ * @param[out] pwm The PWM handle is created on success
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
* @retval #PERIPHERAL_ERROR_OUT_OF_MEMORY Memory allocation failed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_RESOURCE_BUSY Device is in use
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
*
- * @see peripheral_pwm_close()
+ * @post peripheral_pwm_close()
*/
-int peripheral_pwm_open(int device, int channel, peripheral_pwm_h *pwm);
+int peripheral_pwm_open(int chip, int pin, peripheral_pwm_h *pwm);
/**
- * @brief Destory the pwm handle and finalize(unexport) the pwm device.
+ * @platform
+ * @brief Closes the PWM pin.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] pwm The handle to the pwm device
+ * @param[in] pwm The PWM handle
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #PERIPHERAL_ERROR_INVALID_OPERATION Invalid access
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
*
- * @see peripheral_pwm_open()
+ * @pre peripheral_pwm_open()
*/
int peripheral_pwm_close(peripheral_pwm_h pwm);
/**
- * @brief Sets Period of the pwm device.
- * @since_tizen 4.0
- *
- * @param[in] pwm The handle to the pwm device
- * @param[in] period The total period of the PWM signal (in nanoseconds)
- *
- * @return 0 on success, otherwise a negative error value
- * @retval #PERIPHERAL_ERROR_NONE Successful
- * @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
- * @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #PERIPHERAL_ERROR_INVALID_OPERATION Invalid access
- * @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
- */
-int peripheral_pwm_set_period(peripheral_pwm_h pwm, int period);
-
-/**
- * @brief Gets Period of the pwm device.
+ * @platform
+ * @brief Sets period of the PWM pin.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] pwm The handle to the pwm device
- * @param[out] period The total period of the PWM signal (in nanoseconds)
+ * @param[in] pwm The PWM handle
+ * @param[in] period_ns The total period of the PWM pin (in nanoseconds)
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #PERIPHERAL_ERROR_INVALID_OPERATION Invalid access
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
*/
-int peripheral_pwm_get_period(peripheral_pwm_h pwm, int *period);
+int peripheral_pwm_set_period(peripheral_pwm_h pwm, uint32_t period_ns);
/**
- * @brief Sets Duty Cycle of the pwm device.
+ * @platform
+ * @brief Sets duty cycle of the PWM pin.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] pwm The handle to the pwm device
- * @param[in] duty_cycle The active time of the pwm signal (in nanoseconds)
+ * @param[in] pwm The PWM handle
+ * @param[in] duty_cycle_ns The duty cycle of the PWM pin (in nanoseconds)
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #PERIPHERAL_ERROR_INVALID_OPERATION Invalid access
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
*/
-int peripheral_pwm_set_duty_cycle(peripheral_pwm_h pwm, int duty_cycle);
+int peripheral_pwm_set_duty_cycle(peripheral_pwm_h pwm, uint32_t duty_cycle_ns);
/**
- * @brief Gets Duty Cycle of the pwm device.
+ * @platform
+ * @brief Sets polarity of the PWM pin.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] pwm The handle to the pwm device
- * @param[out] duty_cycle The active time of the pwm signal (in nanoseconds)
+ * @param[in] pwm The PWM handle
+ * @param[in] polarity The polarity of the PWM pin
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #PERIPHERAL_ERROR_INVALID_OPERATION Invalid access
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
- */
-int peripheral_pwm_get_duty_cycle(peripheral_pwm_h pwm, int *duty_cycle);
-
-/**
- * @brief Sets Polarity of the pwm device.
- * @since_tizen 4.0
- *
- * @param[in] pwm The handle to the pwm device
- * @param[in] polarity The polarity of the pwm signal
*
- * @return 0 on success, otherwise a negative error value
- * @retval #PERIPHERAL_ERROR_NONE Successful
- * @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
- * @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #PERIPHERAL_ERROR_INVALID_OPERATION Invalid access
- * @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
+ * @see peripheral_pwm_polarity_e
*/
int peripheral_pwm_set_polarity(peripheral_pwm_h pwm, peripheral_pwm_polarity_e polarity);
/**
- * @brief Gets Polarity of the pwm device.
+ * @platform
+ * @brief Enables the PWM pin.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] pwm The handle to the pwm device
- * @param[out] polarity The polarity of the pwm signal
- *
- * @return 0 on success, otherwise a negative error value
- * @retval #PERIPHERAL_ERROR_NONE Successful
- * @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
- * @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #PERIPHERAL_ERROR_INVALID_OPERATION Invalid access
- * @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
- */
-int peripheral_pwm_get_polarity(peripheral_pwm_h pwm, peripheral_pwm_polarity_e *polarity);
-
-/**
- * @brief Enable of the pwm device.
- * @since_tizen 4.0
- *
- * @param[in] pwm The handle to the pwm device
- * @param[in] enable Enable/disable the pwm signal
- * true - enable
- * false - disable
- * @return 0 on success, otherwise a negative error value
- * @retval #PERIPHERAL_ERROR_NONE Successful
- * @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
- * @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #PERIPHERAL_ERROR_INVALID_OPERATION Invalid access
- * @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
- */
-int peripheral_pwm_set_enable(peripheral_pwm_h pwm, bool enable);
-
-/**
- * @brief Gets Enable status of the pwm device.
- * @since_tizen 4.0
- *
- * @param[in] pwm The handle to the pwm device
- * @param[out] enable Enable/disable the pwm signal
+ * @param[in] pwm The PWM handle
+ * @param[in] enabled Enable/disable the PWM pin
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #PERIPHERAL_ERROR_INVALID_OPERATION Invalid access
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
*/
-int peripheral_pwm_get_enable(peripheral_pwm_h pwm, bool *enable);
+int peripheral_pwm_set_enabled(peripheral_pwm_h pwm, bool enabled);
/**
* @}
*/
/**
- * @addtogroup CAPI_SYSTEM_PERIPHERAL_ADC_MODULE
+ * @addtogroup CAPI_SYSTEM_PERIPHERAL_IO_UART_MODULE
* @{
*/
/**
- * @brief Reads data from the adc device.
+ * @brief The handle to the UART device.
* @since_tizen 4.0
- *
- * @param[in] device The device number of the adc device
- * @param[in] channel The channel number to read
- * @param[out] data The address of buffer to read
- *
- * @return 0 on success, otherwise a negative error value
- * @retval #PERIPHERAL_ERROR_NONE Successful
- * @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
- * @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
*/
-int peripheral_adc_read(unsigned int device, unsigned int channel, int *data);
-
-/**
-* @}
-*/
+typedef struct _peripheral_uart_s *peripheral_uart_h;
/**
- * @addtogroup CAPI_SYSTEM_PERIPHERAL_UART_MODULE
- * @{
+ * @brief Enumeration for baud rate.
+ * @since_tizen 4.0
*/
-
-/**
- * @brief The handle to the uart device
+typedef enum {
+ PERIPHERAL_UART_BAUD_RATE_0 = 0, /**< The number of signal in one second is 0 */
+ PERIPHERAL_UART_BAUD_RATE_50, /**< The number of signal in one second is 50 */
+ PERIPHERAL_UART_BAUD_RATE_75, /**< The number of signal in one second is 75 */
+ PERIPHERAL_UART_BAUD_RATE_110, /**< The number of signal in one second is 110 */
+ PERIPHERAL_UART_BAUD_RATE_134, /**< The number of signal in one second is 134 */
+ PERIPHERAL_UART_BAUD_RATE_150, /**< The number of signal in one second is 150 */
+ PERIPHERAL_UART_BAUD_RATE_200, /**< The number of signal in one second is 200 */
+ PERIPHERAL_UART_BAUD_RATE_300, /**< The number of signal in one second is 300 */
+ PERIPHERAL_UART_BAUD_RATE_600, /**< The number of signal in one second is 600 */
+ PERIPHERAL_UART_BAUD_RATE_1200, /**< The number of signal in one second is 1200 */
+ PERIPHERAL_UART_BAUD_RATE_1800, /**< The number of signal in one second is 1800 */
+ PERIPHERAL_UART_BAUD_RATE_2400, /**< The number of signal in one second is 2400 */
+ PERIPHERAL_UART_BAUD_RATE_4800, /**< The number of signal in one second is 4800 */
+ PERIPHERAL_UART_BAUD_RATE_9600, /**< The number of signal in one second is 9600 */
+ PERIPHERAL_UART_BAUD_RATE_19200, /**< The number of signal in one second is 19200 */
+ PERIPHERAL_UART_BAUD_RATE_38400, /**< The number of signal in one second is 38400 */
+ PERIPHERAL_UART_BAUD_RATE_57600, /**< The number of signal in one second is 57600 */
+ PERIPHERAL_UART_BAUD_RATE_115200, /**< The number of signal in one second is 115200 */
+ PERIPHERAL_UART_BAUD_RATE_230400, /**< The number of signal in one second is 230400 */
+} peripheral_uart_baud_rate_e;
+
+/**
+ * @brief Enumeration for byte size.
* @since_tizen 4.0
*/
-typedef struct _peripheral_uart_s *peripheral_uart_h;
+typedef enum {
+ PERIPHERAL_UART_BYTE_SIZE_5BIT = 0, /**< 5 data bits */
+ PERIPHERAL_UART_BYTE_SIZE_6BIT, /**< 6 data bits */
+ PERIPHERAL_UART_BYTE_SIZE_7BIT, /**< 7 data bits */
+ PERIPHERAL_UART_BYTE_SIZE_8BIT, /**< 8 data bits */
+} peripheral_uart_byte_size_e;
/**
- * @brief Enumeration for Baud Rate.
+ * @brief Enumeration for parity bit.
+ * @since_tizen 4.0
*/
typedef enum {
- PERIPHERAL_UART_BAUDRATE_0 = 0,
- PERIPHERAL_UART_BAUDRATE_50,
- PERIPHERAL_UART_BAUDRATE_75,
- PERIPHERAL_UART_BAUDRATE_110,
- PERIPHERAL_UART_BAUDRATE_134,
- PERIPHERAL_UART_BAUDRATE_150,
- PERIPHERAL_UART_BAUDRATE_200,
- PERIPHERAL_UART_BAUDRATE_300,
- PERIPHERAL_UART_BAUDRATE_600,
- PERIPHERAL_UART_BAUDRATE_1200,
- PERIPHERAL_UART_BAUDRATE_1800,
- PERIPHERAL_UART_BAUDRATE_2400,
- PERIPHERAL_UART_BAUDRATE_4800,
- PERIPHERAL_UART_BAUDRATE_9600,
- PERIPHERAL_UART_BAUDRATE_19200,
- PERIPHERAL_UART_BAUDRATE_38400,
- PERIPHERAL_UART_BAUDRATE_57600,
- PERIPHERAL_UART_BAUDRATE_115200,
- PERIPHERAL_UART_BAUDRATE_230400
-} peripheral_uart_baudrate_e;
-
-/**
- * @brief Enumeration for Byte Size.
+ PERIPHERAL_UART_PARITY_NONE = 0, /**< No parity is used */
+ PERIPHERAL_UART_PARITY_EVEN, /**< Even parity is used */
+ PERIPHERAL_UART_PARITY_ODD, /**< ODD parity is used */
+} peripheral_uart_parity_e;
+
+/**
+ * @brief Enumeration for stop bits.
+ * @since_tizen 4.0
*/
typedef enum {
- PERIPHERAL_UART_BYTESIZE_5BIT = 0,
- PERIPHERAL_UART_BYTESIZE_6BIT,
- PERIPHERAL_UART_BYTESIZE_7BIT,
- PERIPHERAL_UART_BYTESIZE_8BIT
-} peripheral_uart_bytesize_e;
+ PERIPHERAL_UART_STOP_BITS_1BIT = 0, /**< One stop bit */
+ PERIPHERAL_UART_STOP_BITS_2BIT, /**< Two stop bits */
+} peripheral_uart_stop_bits_e;
/**
- * @brief Enumeration for Parity Bit.
+ * @brief Enumeration for hardware flow control.
+ * @since_tizen 4.0
*/
typedef enum {
- PERIPHERAL_UART_PARITY_NONE = 0,
- PERIPHERAL_UART_PARITY_EVEN,
- PERIPHERAL_UART_PARITY_ODD
-} peripheral_uart_parity_e;
+ PERIPHERAL_UART_HARDWARE_FLOW_CONTROL_NONE = 0, /**< No hardware flow control */
+ PERIPHERAL_UART_HARDWARE_FLOW_CONTROL_AUTO_RTSCTS, /**< Automatic RTS/CTS hardware flow control*/
+} peripheral_uart_hardware_flow_control_e;
/**
- * @brief Enumeration for Stop Bits.
+ * @brief Enumeration for software flow control.
+ * @since_tizen 4.0
*/
typedef enum {
- PERIPHERAL_UART_STOPBITS_1BIT = 0,
- PERIPHERAL_UART_STOPBITS_2BIT
-} peripheral_uart_stopbits_e;
+ PERIPHERAL_UART_SOFTWARE_FLOW_CONTROL_NONE = 0, /**< No software flow control */
+ PERIPHERAL_UART_SOFTWARE_FLOW_CONTROL_XONXOFF, /**< XON/XOFF software flow control */
+} peripheral_uart_software_flow_control_e;
/**
- * @brief Initializes uart communication and creates uart handle.
+ * @platform
+ * @brief Opens the UART slave device.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
+ * @remarks @a uart should be released with peripheral_uart_close()
*
- * @param[in] port The uart port number that the slave device is connected
- * @param[out] uart The uart handle is created on success
+ * @param[in] port The UART port number that the slave device is connected
+ * @param[out] uart The UART handle is created on success
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
* @retval #PERIPHERAL_ERROR_OUT_OF_MEMORY Memory allocation failed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #PERIPHERAL_ERROR_RESOURCE_BUSY Device is in use
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
*
- * @see peripheral_uart_close()
+ * @post peripheral_uart_close()
*/
int peripheral_uart_open(int port, peripheral_uart_h *uart);
/**
- * @brief Destory the uart handle and release the communication.
+ * @platform
+ * @brief Closes the UART slave device.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] uart The handle to the uart device
+ * @param[in] uart The UART handle
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
*
- * @see peripheral_uart_open()
+ * @pre peripheral_uart_open()
*/
int peripheral_uart_close(peripheral_uart_h uart);
/**
- * @brief Flush all input that has received but not yet been read by the uart
- * device, or all output written but not transmitted to the uart device.
+ * @platform
+ * @brief Sets baud rate of the UART slave device.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] uart The uart handle
+ * @param[in] uart The UART handle
+ * @param[in] baud Baud rate of the UART device
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
+ * @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
+ *
+ * @see peripheral_uart_baud_rate_e
*/
-int peripheral_uart_flush(peripheral_uart_h uart);
+int peripheral_uart_set_baud_rate(peripheral_uart_h uart, peripheral_uart_baud_rate_e baud);
/**
- * @brief Sets baudrate of the uart device.
+ * @platform
+ * @brief Sets byte size of the UART slave device.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] uart The handle to the uart device to set
- * @param[in] baud Baudrate of the uart device
+ * @param[in] uart The UART handle
+ * @param[in] byte_size Byte size of the UART device
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
+ *
+ * @see peripheral_uart_byte_size_e
*/
-int peripheral_uart_set_baudrate(peripheral_uart_h uart, peripheral_uart_baudrate_e baud);
+int peripheral_uart_set_byte_size(peripheral_uart_h uart, peripheral_uart_byte_size_e byte_size);
/**
- * @brief Sets mode of the uart device.
+ * @platform
+ * @brief Sets parity bit of the UART slave device.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] uart The handle to the uart device to set
- * @param[in] bytesize Byte size of the uart device
- * @param[in] parity Parity bits of the uart device
- * @param[in] stopbits Stop bits of the uart device
+ * @param[in] uart The UART handle
+ * @param[in] parity Parity bit of the UART device
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
+ *
+ * @see peripheral_uart_parity_e
*/
-int peripheral_uart_set_mode(peripheral_uart_h uart, peripheral_uart_bytesize_e bytesize, peripheral_uart_parity_e parity, peripheral_uart_stopbits_e stopbits);
+int peripheral_uart_set_parity(peripheral_uart_h uart, peripheral_uart_parity_e parity);
/**
- * @brief Sets flow control of the uart device.
+ * @platform
+ * @brief Sets stop bits of the UART slave device.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] uart The handle to the uart device to set
- * @param[in] xonxoff Turns a transmitter on or off
- * @param[in] rtscts Turns "Request to Send/Clear to Send" on or off
+ * @param[in] uart The UART handle
+ * @param[in] stop_bits Stop bits of the UART device
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
+ *
+ * @see peripheral_uart_stop_bits_e
*/
-int peripheral_uart_set_flowcontrol(peripheral_uart_h uart, bool xonxoff, bool rtscts);
+int peripheral_uart_set_stop_bits(peripheral_uart_h uart, peripheral_uart_stop_bits_e stop_bits);
/**
- * @brief Reads data from the uart device.
+ * @platform
+ * @brief Sets flow control of the UART slave device.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] uart The handle to the uart device
- * @param[out] data The address of read buffer
- * @param[out] length The size of data buffer (in bytes)
+ * @param[in] uart The UART handle
+ * @param[in] sw_flow_control Software flow control (Turns a transmitter on or off)
+ * @param[in] hw_flow_control Hardware flow control (Turns "Request to Send/Clear to Send" on or off)
+ *
+ * @return 0 on success, otherwise a negative error value
+ * @retval #PERIPHERAL_ERROR_NONE Successful
+ * @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
+ * @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
+ *
+ * @see peripheral_uart_software_flow_control_e
+ * @see peripheral_uart_hardware_flow_control_e
+ */
+int peripheral_uart_set_flow_control(peripheral_uart_h uart,
+ peripheral_uart_software_flow_control_e sw_flow_control,
+ peripheral_uart_hardware_flow_control_e hw_flow_control);
+
+/**
+ * @platform
+ * @brief Reads data from the UART slave device.
+ * @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
+ *
+ * @param[in] uart The UART handle
+ * @param[out] data The buffer to read
+ * @param[out] length The size of buffer (in bytes)
*
* @return the number of bytes read on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_TRY_AGAIN Try again
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
+ *
+ * @see peripheral_uart_write()
*/
-int peripheral_uart_read(peripheral_uart_h uart, uint8_t *data, int length);
+int peripheral_uart_read(peripheral_uart_h uart, uint8_t *data, uint32_t length);
/**
- * @brief Write data to the uart device.
+ * @platform
+ * @brief Writes data to the UART slave device.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] uart The handle to the uart device
- * @param[in] data The address of buffer to write
- * @param[in] length The size of data (in bytes)
+ * @param[in] uart The UART handle
+ * @param[in] data The buffer to write
+ * @param[in] length The size of buffer (in bytes)
*
* @return the number of bytes write on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_TRY_AGAIN Try again
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
+ *
+ * @see peripheral_uart_read()
*/
-int peripheral_uart_write(peripheral_uart_h uart, uint8_t *data, int length);
+int peripheral_uart_write(peripheral_uart_h uart, uint8_t *data, uint32_t length);
/**
* @}
*/
/**
- * @addtogroup CAPI_SYSTEM_PERIPHERAL_SPI_MODULE
+ * @addtogroup CAPI_SYSTEM_PERIPHERAL_IO_SPI_MODULE
* @{
*/
/**
- * @brief The handle to the spi device
+ * @brief The handle of a SPI device.
* @since_tizen 4.0
*/
-typedef struct _peripheral_spi_s* peripheral_spi_h;
+typedef struct _peripheral_spi_s *peripheral_spi_h;
/**
- * @brief Enumeration for SPI mode.
+ * @brief Enumeration of SPI transfer modes.
+ * @since_tizen 4.0
*/
typedef enum {
- PERIPHERAL_SPI_MODE_0 = 0,
- PERIPHERAL_SPI_MODE_1,
- PERIPHERAL_SPI_MODE_2,
- PERIPHERAL_SPI_MODE_3
+ PERIPHERAL_SPI_MODE_0 = 0, /**< CPOL = 0, CPHa = 0 Mode */
+ PERIPHERAL_SPI_MODE_1, /**< CPOL = 0, CPHa = 1 Mode */
+ PERIPHERAL_SPI_MODE_2, /**< CPOL = 1, CPHa = 0 Mode */
+ PERIPHERAL_SPI_MODE_3, /**< CPOL = 1, CPHa = 1 Mode */
} peripheral_spi_mode_e;
/**
- * @brief Initializes spi communication and creates spi handle.
+ * @brief Enumeration of bit orders.
* @since_tizen 4.0
- *
- * @param[in] bus The spi bus number that the slave device is connected
- * @param[in] cs The spi chip select number that the slave device is connected
- * @param[out] spi The spi handle is created on success
- *
- * @return 0 on success, otherwise a negative error value
- * @retval #PERIPHERAL_ERROR_NONE Successful
- *
- * @see peripheral_spi_close()
*/
-int peripheral_spi_open(int bus, int cs, peripheral_spi_h *spi);
+typedef enum {
+ PERIPHERAL_SPI_BIT_ORDER_MSB = 0, /**< Use most siginificant bit first */
+ PERIPHERAL_SPI_BIT_ORDER_LSB, /**< Use least significant bit first */
+} peripheral_spi_bit_order_e;
/**
- * @brief Destory the spi handle and release the communication.
+ * @platform
+ * @brief Opens a SPI slave device.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
+ * @remarks @a spi should be released with peripheral_spi_close()
*
- * @param[in] spi The handle to the spi device
+ * @param[in] bus The SPI bus number
+ * @param[in] cs The SPI chip select number
+ * @param[out] spi The SPI device handle
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
+ * @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
+ * @retval #PERIPHERAL_ERROR_OUT_OF_MEMORY Memory allocation failed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #PERIPHERAL_ERROR_RESOURCE_BUSY Device is in use
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
*
- * @see peripheral_spi_open()
+ * @post peripheral_spi_close()
*/
-int peripheral_spi_close(peripheral_spi_h spi);
+int peripheral_spi_open(int bus, int cs, peripheral_spi_h *spi);
/**
- * @brief Sets mode of the spi device.
+ * @platform
+ * @brief Closes the SPI slave device.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] spi The handle to the spi device
- * @param[in] mode The mode of the spi device
+ * @param[in] spi The SPI device handle
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
- */
-int peripheral_spi_set_mode(peripheral_spi_h spi, peripheral_spi_mode_e mode);
-
-/**
- * @brief Gets mode of the spi device.
- * @since_tizen 4.0
- *
- * @param[in] spi The handle to the spi device
- * @param[out] mode The mode of the spi device
*
- * @return 0 on success, otherwise a negative error value
- * @retval #PERIPHERAL_ERROR_NONE Successful
- * @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
- * @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
+ * @see peripheral_spi_open()
*/
-int peripheral_spi_get_mode(peripheral_spi_h spi, peripheral_spi_mode_e *mode);
+int peripheral_spi_close(peripheral_spi_h spi);
/**
- * @brief Sets bits justification of the spi device.
+ * @platform
+ * @brief Sets the SPI transfer mode.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] spi The handle to the spi device
- * @param[in] lsb The bit position to be transmitted first
- * true - LSB first
- * false - MSB first
+ * @param[in] spi The SPI device handle
+ * @param[in] mode The SPI transfer mode
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
+ *
+ * @see peripheral_spi_mode_e
*/
-int peripheral_spi_set_lsb_first(peripheral_spi_h spi, bool lsb);
+int peripheral_spi_set_mode(peripheral_spi_h spi, peripheral_spi_mode_e mode);
/**
- * @brief Gets bits justification of the spi device.
+ * @platform
+ * @brief Sets the SPI bit order.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] spi The handle to the spi device
- * @param[out] lsb The bit position to be transmitted first
+ * @param[in] spi The SPI device handle
+ * @param[in] bit_order The transfer bit order
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
+ *
+ * @see peripheral_spi_bit_order_e
*/
-int peripheral_spi_get_lsb_first(peripheral_spi_h spi, bool *lsb);
+int peripheral_spi_set_bit_order(peripheral_spi_h spi, peripheral_spi_bit_order_e bit_order);
/**
- * @brief Sets the number of bits per word of the spi device
+ * @platform
+ * @brief Sets the number of bits per word.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] spi The handle to the spi device
+ * @param[in] spi The SPI device handle
* @param[in] bits The number of bits per word (in bits)
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
*/
-int peripheral_spi_set_bits_per_word(peripheral_spi_h spi, unsigned char bits);
+int peripheral_spi_set_bits_per_word(peripheral_spi_h spi, uint8_t bits);
/**
- * @brief Gets the number of bits per word of the spi device
+ * @platform
+ * @brief Sets the frequency of the SPI bus.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
+ * @remarks The frequencies supported are board dependent.
*
- * @param[in] spi The handle to the spi device
- * @param[out] bits The number of bits per word (in bits)
+ * @param[in] spi The SPI device handle
+ * @param[in] freq_hz Frequency to set (in Hz)
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
*/
-int peripheral_spi_get_bits_per_word(peripheral_spi_h spi, unsigned char *bits);
+int peripheral_spi_set_frequency(peripheral_spi_h spi, uint32_t freq_hz);
/**
- * @brief Sets default max speed of the spi device.
+ * @platform
+ * @brief Reads the bytes data from the SPI slave device.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] spi The handle to the spi device
- * @param[in] freq Max speed (in hz)
+ * @param[in] spi The SPI device handle
+ * @param[out] data The data buffer to read
+ * @param[in] length The size of data buffer (in bytes)
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
- */
-int peripheral_spi_set_frequency(peripheral_spi_h spi, unsigned int freq);
-
-/**
- * @brief Gets default max speed of the spi device.
- * @since_tizen 4.0
- *
- * @param[in] spi The handle to the spi device
- * @param[out] freq Max speed (in hz)
*
- * @return 0 on success, otherwise a negative error value
- * @retval #PERIPHERAL_ERROR_NONE Successful
- * @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
- * @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- * @retval #PERIPHERAL_ERROR_NO_DEVICE Device is not exist or removed
+ * @see peripheral_spi_write()
*/
-
-int peripheral_spi_get_frequency(peripheral_spi_h spi, unsigned int *freq);
+int peripheral_spi_read(peripheral_spi_h spi, uint8_t *data, uint32_t length);
/**
- * @brief Reads data from the slave device.
+ * @platform
+ * @brief Writes the bytes data to the SPI slave device.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] spi The handle to the spi device
- * @param[out] data The address of buffer to read
+ * @param[in] spi The SPI device handle
+ * @param[in] data The data buffer to write
* @param[in] length The size of data buffer (in bytes)
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
- */
-int peripheral_spi_read(peripheral_spi_h spi, unsigned char *data, int length);
-
-/**
- * @brief Write data to the slave device.
- * @since_tizen 4.0
*
- * @param[in] spi The handle to the spi device
- * @param[in] data The address of buffer to write
- * @param[in] length The size of data (in bytes)
- *
- * @return 0 on success, otherwise a negative error value
- * @retval #PERIPHERAL_ERROR_NONE Successful
- * @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
- * @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
- * @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
+ * @see peripheral_spi_read()
*/
-int peripheral_spi_write(peripheral_spi_h spi, unsigned char *data, int length);
+int peripheral_spi_write(peripheral_spi_h spi, uint8_t *data, uint32_t length);
/**
- * @brief Exchange data with the slave device.
+ * @platform
+ * @brief Exchanges the bytes data to the SPI slave device.
* @since_tizen 4.0
+ * @privlevel platform
+ * @privilege http://tizen.org/privilege/peripheralio
*
- * @param[in] spi The handle to the spi device
- * @param[in] txdata The address of buffer to write
- * @param[out] rxdata The address of buffer to read
- * @param[in] length The size of data (in bytes)
+ * @param[in] spi The SPI device handle
+ * @param[in] txdata The data buffer to write
+ * @param[out] rxdata The data buffer to read
+ * @param[in] length The size of txdata and rxdata buffer (in bytes)
*
* @return 0 on success, otherwise a negative error value
* @retval #PERIPHERAL_ERROR_NONE Successful
* @retval #PERIPHERAL_ERROR_IO_ERROR I/O operation failed
+ * @retval #PERIPHERAL_ERROR_NO_DEVICE Device does not exist or is removed
+ * @retval #PERIPHERAL_ERROR_PERMISSION_DENIED Permission denied
* @retval #PERIPHERAL_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #PERIPHERAL_ERROR_NOT_SUPPORTED Not supported
* @retval #PERIPHERAL_ERROR_UNKNOWN Unknown internal error
+ *
+ * @see peripheral_spi_read()
+ * @see peripheral_spi_write()
*/
-int peripheral_spi_read_write(peripheral_spi_h spi, unsigned char *txdata, unsigned char *rxdata, int length);
+int peripheral_spi_transfer(peripheral_spi_h spi, uint8_t *txdata, uint8_t *rxdata, uint32_t length);
/**
* @}
}
#endif
-#endif /* __PERIPHERAL_IO_H__ */
+#endif /* __TIZEN_SYSTEM_PERIPHERAL_IO_H__ */
projects / platform / core / api / peripheral-io.git / commitdiff