2 * Copyright (c) 2011-2013 Samsung Electronics Co., Ltd All Rights Reserved
4 * Licensed under the Apache License, Version 2.0 (the "License");
5 * you may not use this file except in compliance with the License.
6 * You may obtain a copy of the License at
8 * http://www.apache.org/licenses/LICENSE-2.0
10 * Unless required by applicable law or agreed to in writing, software
11 * distributed under the License is distributed on an "AS IS" BASIS,
12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 * See the License for the specific language governing permissions and
14 * limitations under the License.
18 #ifndef __NET_CONNECTION_INTF_H__
19 #define __NET_CONNECTION_INTF_H__
22 #include "connection_profile.h"
27 #endif /* __cplusplus */
31 * @file net_connection.h
36 * @addtogroup CAPI_NETWORK_CONNECTION_MANAGER_MODULE
42 * @brief The connection handle.
43 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
45 typedef void* connection_h;
49 * @brief The profiles iterator handle.
50 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
52 typedef void* connection_profile_iterator_h;
56 * @brief Enumeration for connection type.
57 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
60 CONNECTION_TYPE_DISCONNECTED = 0, /**< Disconnected */
61 CONNECTION_TYPE_WIFI = 1, /**< Wi-Fi type */
62 CONNECTION_TYPE_CELLULAR = 2, /**< Cellular type */
63 CONNECTION_TYPE_ETHERNET = 3, /**< Ethernet type */
64 CONNECTION_TYPE_BT = 4, /**< Bluetooth type */
65 CONNECTION_TYPE_NET_PROXY, /**< Proxy type for internet connection (Since 3.0) */
70 * @brief Enumeration for cellular network state.
71 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
74 CONNECTION_CELLULAR_STATE_OUT_OF_SERVICE = 0, /**< Out of service */
75 CONNECTION_CELLULAR_STATE_FLIGHT_MODE = 1, /**< Flight mode */
76 CONNECTION_CELLULAR_STATE_ROAMING_OFF = 2, /**< Roaming is turned off */
77 CONNECTION_CELLULAR_STATE_CALL_ONLY_AVAILABLE = 3, /**< Call is only available */
78 CONNECTION_CELLULAR_STATE_AVAILABLE = 4, /**< Available but not connected yet */
79 CONNECTION_CELLULAR_STATE_CONNECTED = 5, /**< Connected */
80 } connection_cellular_state_e;
84 * @brief Enumeration for Wi-Fi state.
85 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
88 CONNECTION_WIFI_STATE_DEACTIVATED = 0, /**< Wi-Fi is deactivated */
89 CONNECTION_WIFI_STATE_DISCONNECTED = 1, /**< Disconnected */
90 CONNECTION_WIFI_STATE_CONNECTED = 2, /**< Connected */
91 } connection_wifi_state_e;
95 * @brief Enumeration for ethernet state.
96 * @since_tizen @if MOBILE 2.4 @elseif WEARABLE 3.0 @endif
99 CONNECTION_ETHERNET_STATE_DEACTIVATED = 0, /**< There is no Ethernet profile to open */
100 CONNECTION_ETHERNET_STATE_DISCONNECTED = 1, /**< Disconnected */
101 CONNECTION_ETHERNET_STATE_CONNECTED = 2, /**< Connected */
102 } connection_ethernet_state_e;
106 * @brief Enumeration for Bluetooth state.
107 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
110 CONNECTION_BT_STATE_DEACTIVATED = 0, /**< There is no Bluetooth profile to open */
111 CONNECTION_BT_STATE_DISCONNECTED = 1, /**< Disconnected */
112 CONNECTION_BT_STATE_CONNECTED = 2, /**< Connected */
113 } connection_bt_state_e;
117 * @brief Enumeration for connection iterator type.
118 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
121 CONNECTION_ITERATOR_TYPE_REGISTERED = 0, /**< The iterator of the registered profile */
122 CONNECTION_ITERATOR_TYPE_CONNECTED = 1, /**< The iterator of the connected profile */
123 CONNECTION_ITERATOR_TYPE_DEFAULT = 2, /**< The iterator of the default profile */
124 } connection_iterator_type_e;
128 * @brief Enumeration for reset profile type.
129 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
133 * Initialized with the default profile defined by csc
135 CONNECTION_RESET_DEFAULT_PROFILE = 0,
138 * Remove all profiles
140 CONNECTION_RESET_CLEAR_PROFILE = 1,
142 } connection_reset_option_e;
146 * @brief Enumeration for the attached or detached state of ethernet cable.
147 * @since_tizen @if MOBILE 2.4 @elseif WEARABLE 3.0 @endif
150 CONNECTION_ETHERNET_CABLE_DETACHED = 0, /**< Ethernet cable is detached */
151 CONNECTION_ETHERNET_CABLE_ATTACHED = 1, /**< Ethernet cable is attached */
152 } connection_ethernet_cable_state_e;
156 * @brief Enumeration for connection errors.
157 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
163 CONNECTION_ERROR_NONE = TIZEN_ERROR_NONE,
168 CONNECTION_ERROR_INVALID_PARAMETER = TIZEN_ERROR_INVALID_PARAMETER,
171 * Out of memory error
173 CONNECTION_ERROR_OUT_OF_MEMORY = TIZEN_ERROR_OUT_OF_MEMORY,
178 CONNECTION_ERROR_INVALID_OPERATION = TIZEN_ERROR_INVALID_OPERATION,
181 * Address family not supported
183 CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED = TIZEN_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED,
188 CONNECTION_ERROR_OPERATION_FAILED = TIZEN_ERROR_CONNECTION|0x0401,
193 CONNECTION_ERROR_ITERATOR_END = TIZEN_ERROR_CONNECTION|0x0402,
196 * There is no connection
198 CONNECTION_ERROR_NO_CONNECTION = TIZEN_ERROR_CONNECTION|0x0403,
203 CONNECTION_ERROR_NOW_IN_PROGRESS = TIZEN_ERROR_NOW_IN_PROGRESS,
208 CONNECTION_ERROR_ALREADY_EXISTS = TIZEN_ERROR_CONNECTION|0x0404,
211 * Operation is aborted
213 CONNECTION_ERROR_OPERATION_ABORTED = TIZEN_ERROR_CONNECTION|0x0405,
218 CONNECTION_ERROR_DHCP_FAILED = TIZEN_ERROR_CONNECTION|0x0406,
223 CONNECTION_ERROR_INVALID_KEY = TIZEN_ERROR_CONNECTION|0x0407,
228 CONNECTION_ERROR_NO_REPLY = TIZEN_ERROR_CONNECTION|0x0408,
233 CONNECTION_ERROR_PERMISSION_DENIED = TIZEN_ERROR_PERMISSION_DENIED,
238 CONNECTION_ERROR_NOT_SUPPORTED = TIZEN_ERROR_NOT_SUPPORTED
240 } connection_error_e;
248 * @addtogroup CAPI_NETWORK_CONNECTION_STATISTICS_MODULE
254 * @brief Enumeration for statistics type.
255 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
258 CONNECTION_STATISTICS_TYPE_LAST_RECEIVED_DATA = 0, /**< Last received data */
259 CONNECTION_STATISTICS_TYPE_LAST_SENT_DATA = 1, /**< Last sent data */
260 CONNECTION_STATISTICS_TYPE_TOTAL_RECEIVED_DATA = 2, /**< Total received data */
261 CONNECTION_STATISTICS_TYPE_TOTAL_SENT_DATA = 3, /**< Total sent data */
262 } connection_statistics_type_e;
271 * @addtogroup CAPI_NETWORK_CONNECTION_MANAGER_MODULE
277 * @brief Creates a handle for managing data connections.
278 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
280 * @privilege %http://tizen.org/privilege/network.get
281 * @remarks You must release @a handle using connection_destroy().
282 * @param[out] connection The connection handle
283 * @return @c 0 on success,
284 * otherwise a negative error value
285 * @retval #CONNECTION_ERROR_NONE Successful
286 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
287 * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
288 * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
289 * @see connection_destroy()
291 int connection_create(connection_h* connection);
295 * @brief Destroys the connection handle.
296 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
297 * @param[in] connection The connection handle
298 * @return @c 0 on success,
299 * otherwise a negative error value
300 * @retval #CONNECTION_ERROR_NONE Successful
301 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
302 * @see connection_create()
304 int connection_destroy(connection_h connection);
308 * @brief Called when the type of a connection is changed.
309 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
310 * @param[in] type The type of the current network connection
311 * @param[in] user_data The user data passed from the callback registration function
312 * @see connection_set_type_changed_cb()
313 * @see connection_unset_type_changed_cb()
315 typedef void(*connection_type_changed_cb)(connection_type_e type, void* user_data);
319 * @brief Called when the address is changed.
320 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
321 * @param[in] ipv4_address The IP address for IPv4
322 * @param[in] ipv6_address The IP address for IPv6
323 * @param[in] user_data The user data passed from the callback registration function
324 * @see connection_set_ip_address_changed_cb()
325 * @see connection_unset_ip_address_changed_cb()
326 * @see connection_set_proxy_address_changed_cb()
327 * @see connection_unset_proxy_address_changed_cb()
329 typedef void(*connection_address_changed_cb)(const char* ipv4_address,
330 const char* ipv6_address, void* user_data);
334 * @brief Called when connection_set_default_cellular_service_profile_async() finishes.
335 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
336 * @param[in] result The result
337 * @param[in] user_data The user data passed from connection_open_profile()
338 * @pre connection_set_default_cellular_service_profile_async() will invoke this callback function.
339 * @see connection_set_default_cellular_service_profile_async()
341 typedef void(*connection_set_default_cb)(connection_error_e result, void* user_data);
343 /* @brief Called with an IPv6 address.
345 * @remarks If @a ipv6_address is needed outside the callback, a copy should be made. \n
346 * @a ipv6_address will be freed automatically after the execution of this callback.
347 * @param[in] ipv6_address The IPv6 address
348 * @param[in] user_data The user data passed from the foreach function
349 * @return @c true to continue with the next iteration of the loop, \n
350 * @c false to break out of the loop
351 * @pre connection_foreach_ipv6_addresses() will invoke this callback.
352 * @see connection_foreach_ipv6_addresses()
354 typedef bool(*connection_ipv6_address_cb)(char *ipv6_address, void *user_data);
357 * @brief Gets the type of the current profile for data connection.
358 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
359 * @param[in] connection The connection handle
360 * @param[out] type The type of the network
361 * @return @c 0 on success,
362 * otherwise a negative error value
363 * @retval #CONNECTION_ERROR_NONE Successful
364 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
365 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
367 int connection_get_type(connection_h connection, connection_type_e* type);
371 * @brief Gets the IP address of the current connection.
372 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
373 * @remarks You must release @a ip_address using free().
374 * @param[in] connection The connection handle
375 * @param[in] address_family The address family
376 * @param[out] ip_address The pointer to the IP address string
377 * @return @c 0 on success,
378 * otherwise a negative error value
379 * @retval #CONNECTION_ERROR_NONE Successful
380 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
381 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
382 * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
384 int connection_get_ip_address(connection_h connection,
385 connection_address_family_e address_family, char** ip_address);
389 * @brief Gets the proxy address of the current connection.
390 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
391 * @remarks You must release @a proxy using free().
392 * @param[in] connection The connection handle
393 * @param[in] address_family The address family
394 * @param[out] proxy The proxy address
395 * @return @c 0 on success,
396 * otherwise a negative error value
397 * @retval #CONNECTION_ERROR_NONE Successful
398 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
399 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
400 * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
402 int connection_get_proxy(connection_h connection,
403 connection_address_family_e address_family, char** proxy);
407 * @brief Gets the MAC address of the Wi-Fi or ethernet.
408 * @since_tizen @if MOBILE 2.4 @elseif WEARABLE 3.0 @endif
409 * @remarks @a mac_addr must be released with free() by you.
410 * @param[in] connection The handle of the connection
411 * @param[in] type The type of current network connection
412 * @param[out] mac_addr The MAC address
413 * @return @c 0 on success,
414 * otherwise a negative error value
415 * @retval #CONNECTION_ERROR_NONE Successful
416 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
417 * @retval #CONNECTION_ERROR_INVALID_OPERATION Invalid operation
418 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
419 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
420 * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
422 int connection_get_mac_address(connection_h connection,
423 connection_type_e type, char** mac_addr);
427 * @brief Gets the state of cellular connection.
428 * @details The returned state is for the cellular connection state.
429 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
430 * @param[in] connection The connection handle
431 * @param[out] state The state of the cellular connection
432 * @return @c 0 on success,
433 * otherwise a negative error value
434 * @retval #CONNECTION_ERROR_NONE Successful
435 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
436 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
437 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
439 int connection_get_cellular_state(connection_h connection, connection_cellular_state_e* state);
443 * @brief Gets the state of the Wi-Fi.
444 * @details The returned state is for the Wi-Fi connection state.
445 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
447 * @privilege %http://tizen.org/privilege/network.get
448 * @param[in] connection The connection handle
449 * @param[out] state The state of Wi-Fi connection
450 * @return @c 0 on success,
451 * otherwise a negative error value
452 * @retval #CONNECTION_ERROR_NONE Successful
453 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
454 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
455 * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
456 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
458 int connection_get_wifi_state(connection_h connection, connection_wifi_state_e* state);
462 * @brief Gets the state of the Ethernet.
463 * @details The returned state is for the Ethernet connection state.
464 * @since_tizen @if MOBILE 2.4 @elseif WEARABLE 3.0 @endif
466 * @privilege %http://tizen.org/privilege/network.get
467 * @param[in] connection The connection handle
468 * @param[out] state The state of Ethernet connection
469 * @return @c 0 on success,
470 * otherwise a negative error value
471 * @retval #CONNECTION_ERROR_NONE Successful
472 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
473 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
474 * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
475 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
477 int connection_get_ethernet_state(connection_h connection, connection_ethernet_state_e* state);
481 * @brief Checks for ethernet cable is attached or not.
482 * @details The returned state is for the ethernet cable state.
483 * @since_tizen @if MOBILE 2.4 @elseif WEARABLE 3.0 @endif
485 * @privilege %http://tizen.org/privilege/network.get
486 * @param[in] connection The handle of the connection
487 * @param[in] state The state of ethernet cable
488 * @return @c 0 on success,
489 * otherwise a negative error value
490 * @retval #CONNECTION_ERROR_NONE Successful
491 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
492 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
493 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
494 * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
496 int connection_get_ethernet_cable_state(connection_h connection,
497 connection_ethernet_cable_state_e *state);
501 * @deprecated Deprecated since 4.0. Use connection_ethernet_cable_state_changed_cb instead.
502 * @brief Called when ethernet cable is plugged [in/out].
503 * @since_tizen @if MOBILE 2.4 @elseif WEARABLE 3.0 @endif
504 * @param[in] state The state of ethernet cable
505 * @param[in] user_data The user data passed to callback registration function
507 typedef void(*connection_ethernet_cable_state_chaged_cb)
508 (connection_ethernet_cable_state_e state, void* user_data);
512 * @deprecated Deprecated since 4.0. Use connection_set_ethernet_cable_state_changed_cb() instead.
513 * @brief Registers callback for ethernet cable is plugged [in/out] event.
514 * @since_tizen @if MOBILE 2.4 @elseif WEARABLE 3.0 @endif
515 * @param[in] connection The handle of connection
516 * @param[in] callback The callback function to be called
517 * @param[in] user_data The user data passed to the callback function
518 * @return @c 0 on success,
519 * otherwise a negative error value
520 * @retval #CONNECTION_ERROR_NONE Successful
521 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
522 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
523 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
525 int connection_set_ethernet_cable_state_chaged_cb(connection_h connection,
526 connection_ethernet_cable_state_chaged_cb callback, void *user_data) TIZEN_DEPRECATED_API;
530 * @deprecated Deprecated since 4.0. Use connection_unset_ethernet_cable_state_changed_cb() instead.
531 * @brief Unregisters callback for ethernet cable is plugged [in/out] event.
532 * @since_tizen @if MOBILE 2.4 @elseif WEARABLE 3.0 @endif
533 * @param[in] connection The handle of connection
534 * @return @c 0 on success,
535 * otherwise a negative error value
536 * @retval #CONNECTION_ERROR_NONE Successful
537 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
538 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
539 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
541 int connection_unset_ethernet_cable_state_chaged_cb(connection_h connection) TIZEN_DEPRECATED_API;
544 * @brief Called when ethernet cable is plugged [in/out].
546 * @param[in] state The state of ethernet cable
547 * @param[in] user_data The user data passed to callback registration function
549 typedef void(*connection_ethernet_cable_state_changed_cb)(
550 connection_ethernet_cable_state_e state, void* user_data);
554 * @brief Registers callback for ethernet cable is plugged [in/out] event.
556 * @param[in] connection The handle of connection
557 * @param[in] callback The callback function to be called
558 * @param[in] user_data The user data passed to the callback function
559 * @return @c 0 on success,
560 * otherwise a negative error value
561 * @retval #CONNECTION_ERROR_NONE Successful
562 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
563 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
564 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
566 int connection_set_ethernet_cable_state_changed_cb(connection_h connection,
567 connection_ethernet_cable_state_changed_cb callback, void *user_data);
571 * @brief Unregisters callback for ethernet cable is plugged [in/out] event.
573 * @param[in] connection The handle of connection
574 * @return @c 0 on success,
575 * otherwise a negative error value
576 * @retval #CONNECTION_ERROR_NONE Successful
577 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
578 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
579 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
581 int connection_unset_ethernet_cable_state_changed_cb(connection_h connection);
585 * @brief Gets the state of the Bluetooth.
586 * @details The returned state is for the Bluetooth connection state.
587 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
589 * @privilege %http://tizen.org/privilege/network.get
590 * @param[in] connection The connection handle
591 * @param[out] state The state of the Bluetooth connection
592 * @return @c 0 on success,
593 * otherwise a negative error value
594 * @retval #CONNECTION_ERROR_NONE Successful
595 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
596 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
597 * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
598 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
600 int connection_get_bt_state(connection_h connection, connection_bt_state_e* state);
604 * @brief Registers the callback that is called when the type of the current connection is changed.
605 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
606 * @param[in] connection The connection handle
607 * @param[in] callback The callback function to be called
608 * @param[in] user_data The user data passed to the callback function
609 * @return @c 0 on success,
610 * otherwise a negative error value
611 * @retval #CONNECTION_ERROR_NONE Successful
612 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
613 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
615 int connection_set_type_changed_cb(connection_h connection,
616 connection_type_changed_cb callback, void* user_data);
620 * @brief Unregisters the callback that is called when the type of current connection is changed.
621 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
622 * @param[in] connection The connection handle
623 * @return @c 0 on success,
624 * otherwise a negative error value
625 * @retval #CONNECTION_ERROR_NONE Successful
626 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
627 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
629 int connection_unset_type_changed_cb(connection_h connection);
633 * @brief Registers the callback that is called when the IP address is changed.
634 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
635 * @param[in] connection The connection handle
636 * @param[in] callback The callback function to be called
637 * @param[in] user_data The user data passed to the callback function
638 * @return @c 0 on success,
639 * otherwise a negative error value
640 * @retval #CONNECTION_ERROR_NONE Successful
641 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
642 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
644 int connection_set_ip_address_changed_cb(connection_h connection,
645 connection_address_changed_cb callback, void* user_data);
649 * @brief Unregisters the callback that is called when the IP address is changed.
650 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
651 * @param[in] connection The connection handle
652 * @return @c 0 on success,
653 * otherwise a negative error value
654 * @retval #CONNECTION_ERROR_NONE Successful
655 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
656 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
658 int connection_unset_ip_address_changed_cb(connection_h connection);
662 * @brief Registers the callback that is called when the proxy address is changed.
663 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
664 * @param[in] connection The connection handle
665 * @param[in] callback The callback function to be called
666 * @param[in] user_data The user data passed to the callback function
667 * @return @c 0 on success,
668 * otherwise a negative error value
669 * @retval #CONNECTION_ERROR_NONE Successful
670 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
671 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
673 int connection_set_proxy_address_changed_cb(connection_h connection,
674 connection_address_changed_cb callback, void* user_data);
678 * @brief Unregisters the callback that is called when the proxy address is changed.
679 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
680 * @param[in] connection The connection handle
681 * @return @c 0 on success,
682 * otherwise a negative error value
683 * @retval #CONNECTION_ERROR_NONE Successful
684 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
685 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
687 int connection_unset_proxy_address_changed_cb(connection_h connection);
691 * @brief Adds a new profile which is created by connection_profile_create().
692 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
694 * @privilege %http://tizen.org/privilege/network.profile
695 * @remarks You can only add a profile of the cellular type.
696 * @param[in] connection The connection handle
697 * @param[in] profile The profile handle
698 * @return @c 0 on success,
699 * otherwise a negative error value
700 * @retval #CONNECTION_ERROR_NONE Successful
701 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
702 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
703 * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
704 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
706 int connection_add_profile(connection_h connection, connection_profile_h profile);
710 * @brief Removes an existing profile.
711 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
713 * @privilege %http://tizen.org/privilege/network.profile \n
714 * %http://tizen.org/privilege/network.get
715 * @remarks This API needs both privileges.
716 * @param[in] connection The connection handle
717 * @param[in] profile The profile handle
718 * @return @c 0 on success,
719 * otherwise a negative error value
720 * @retval #CONNECTION_ERROR_NONE Successful
721 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
722 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
723 * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
724 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
726 int connection_remove_profile(connection_h connection, connection_profile_h profile);
730 * @brief Updates an existing profile.
731 * @details When a profile is changed, these changes will be not applied to the
732 * Connection Manager immediately.
733 * When you call this function, your changes affect the Connection Manager
734 * and the existing profile is updated.
735 * In addition, the existing profile will be updated if you call connection_open_profile().
736 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
738 * @privilege %http://tizen.org/privilege/network.profile \n
739 * %http://tizen.org/privilege/network.get
740 * @remarks This API needs both privileges.
741 * @param[in] connection The connection handle
742 * @param[in] profile The profile handle
743 * @return @c 0 on success,
744 * otherwise a negative error value
745 * @retval #CONNECTION_ERROR_NONE Successful
746 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
747 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
748 * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
749 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
750 * @see connection_open_profile()
752 int connection_update_profile(connection_h connection, connection_profile_h profile);
756 * @brief Gets a profiles iterator.
757 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
759 * @privilege %http://tizen.org/privilege/network.get
760 * @remarks You must release @a profile_iterator using connection_destroy().
761 * @param[in] connection The connection handle
762 * @param[in] type The type of the connection iterator
763 * @param[out] profile_iterator The iterator of profile
764 * @return @c 0 on success,
765 * otherwise a negative error value
766 * @retval #CONNECTION_ERROR_NONE Successful
767 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
768 * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
769 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
770 * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
772 int connection_get_profile_iterator(connection_h connection,
773 connection_iterator_type_e type, connection_profile_iterator_h* profile_iterator);
777 * @brief Moves the profile iterator to the next position and gets a profile handle.
778 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
779 * @param[in] profile_iterator The iterator of profile
780 * @param[out] profile The profile handle
781 * @return @c 0 on success,
782 * otherwise a negative error value
783 * @retval #CONNECTION_ERROR_NONE Successful
784 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
785 * @retval #CONNECTION_ERROR_ITERATOR_END End of iteration
787 int connection_profile_iterator_next(connection_profile_iterator_h profile_iterator,
788 connection_profile_h* profile);
792 * @brief Checks whether the next element of a profile iterator exists or not.
793 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
794 * @remarks The specific error code can be obtained using the get_last_result() method.
795 * Error codes are described in Exception section.
796 * @param[in] profile_iterator The iterator of profile
797 * @return @c true if next element exists,
798 * otherwise @c false if next element doesn't exist
800 bool connection_profile_iterator_has_next(connection_profile_iterator_h profile_iterator);
804 * @brief Destroys a profiles iterator.
805 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
806 * @param[in] profile_iterator The iterator of the profile
807 * @return @c 0 on success,
808 * otherwise a negative error value
809 * @retval #CONNECTION_ERROR_NONE Successful
810 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
812 int connection_destroy_profile_iterator(connection_profile_iterator_h profile_iterator);
816 * @brief Gets the name of the default profile.
817 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
819 * @privilege %http://tizen.org/privilege/network.get
820 * @remarks You must release @a profile using connection_profile_destroy().
821 * @param[in] connection The connection handle
822 * @param[out] profile The profile handle
823 * @return @c 0 on success,
824 * otherwise a negative error value
825 * @retval #CONNECTION_ERROR_NONE Successful
826 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
827 * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
828 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
829 * @retval #CONNECTION_ERROR_NO_CONNECTION There is no connection
830 * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
832 int connection_get_current_profile(connection_h connection, connection_profile_h* profile);
836 * @brief Gets the default profile which provides the given cellular service.
837 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
839 * @privilege %http://tizen.org/privilege/network.get
840 * @remarks You must release @a profile using connection_profile_destroy().
841 * @param[in] connection The connection handle
842 * @param[in] type The type of cellular service \n
843 * #CONNECTION_CELLULAR_SERVICE_TYPE_APPLICATION is not permitted
844 * @param[out] profile The profile handle
845 * @return @c 0 on success,
846 * otherwise a negative error value
847 * @retval #CONNECTION_ERROR_NONE Successful
848 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
849 * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
850 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
851 * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
852 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
854 int connection_get_default_cellular_service_profile(connection_h connection,
855 connection_cellular_service_type_e type, connection_profile_h* profile);
859 * @brief Sets the default profile which provides the given cellular service.
860 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
862 * @privilege %http://tizen.org/privilege/network.profile \n
863 * %http://tizen.org/privilege/network.get
864 * @remarks This API needs both privileges.
865 * @param[in] connection The connection handle
866 * @param[in] type The type of cellular service \n
867 * Only #CONNECTION_CELLULAR_SERVICE_TYPE_INTERNET and
868 * #CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_INTERNET are permitted
869 * @param[in] profile The profile handle
870 * @return @c 0 on success,
871 * otherwise a negative error value
872 * @retval #CONNECTION_ERROR_NONE Successful
873 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
874 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
875 * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
876 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
878 int connection_set_default_cellular_service_profile(connection_h connection,
879 connection_cellular_service_type_e type, connection_profile_h profile);
883 * @brief Sets the default profile which provides the given cellular service, asynchronously.
884 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
886 * @privilege %http://tizen.org/privilege/network.profile \n
887 * %http://tizen.org/privilege/network.get
888 * @remarks This API needs both privileges.
889 * @param[in] connection The connection handle
890 * @param[in] type The type of cellular service \n
891 * Only #CONNECTION_CELLULAR_SERVICE_TYPE_INTERNET and
892 * #CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_INTERNET are permitted
893 * @param[in] profile The profile handle
894 * @param[in] callback The callback function to be called
895 * @param[in] user_data The user data passed to the callback function
896 * @return @c 0 on success,
897 * otherwise a negative error value
898 * @retval #CONNECTION_ERROR_NONE Successful
899 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
900 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
901 * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
902 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
904 int connection_set_default_cellular_service_profile_async(connection_h connection,
905 connection_cellular_service_type_e type, connection_profile_h profile,
906 connection_set_default_cb callback, void* user_data);
910 * @brief Called after connection_open_profile() is finished.
911 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
912 * @param[in] result The result
913 * @param[in] user_data The user data passed from connection_open_profile()
914 * @pre connection_open_profile() will invoke this callback function.
915 * @see connection_open_profile()
917 typedef void(*connection_opened_cb)(connection_error_e result, void* user_data);
921 * @brief Called after connection_close_profile() is finished.
922 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
923 * @param[in] result The result
924 * @param[in] user_data The user data passed from connection_close_profile()
925 * @pre connection_close_profile() will invoke this callback function.
926 * @see connection_close_profile()
928 typedef void(*connection_closed_cb)(connection_error_e result, void* user_data);
932 * @brief Called after connection_reset_profile() is finished.
933 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
934 * @param[in] result The result
935 * @param[in] user_data The user data passed from connection_reset_profile()
936 * @pre connection_reset_profile() will invoke this callback function.
937 * @see connection_reset_profile()
939 typedef void(*connection_reset_cb)(connection_error_e result, void* user_data);
943 * @brief Opens a connection of profile, asynchronously.
944 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
946 * @privilege %http://tizen.org/privilege/network.set \n
947 * %http://tizen.org/privilege/network.get
948 * @remarks This API needs both privileges.
949 * @param[in] connection The connection handle
950 * @param[in] profile The profile handle
951 * @param[in] callback The callback function to be called
952 * @param[in] user_data The user data passed to the callback function
953 * @return @c 0 on success,
954 * otherwise a negative error value
955 * @retval #CONNECTION_ERROR_NONE Successful
956 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
957 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
958 * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
959 * @post connection_opened_cb() will be invoked.
960 * @see connection_opened_cb()
961 * @see connection_close_profile()
962 * @see connection_profile_set_state_changed_cb()
963 * @see connection_profile_unset_state_changed_cb()
964 * @see connection_profile_state_changed_cb()
966 int connection_open_profile(connection_h connection, connection_profile_h profile,
967 connection_opened_cb callback, void* user_data);
971 * @brief Closes a connection of profile.
972 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
974 * @privilege %http://tizen.org/privilege/network.set
975 * @param[in] connection The connection handle
976 * @param[in] profile The profile handle
977 * @param[in] callback The callback function to be called
978 * @param[in] user_data The user data passed to the callback function
979 * @return @c 0 on success,
980 * otherwise a negative error value
981 * @retval #CONNECTION_ERROR_NONE Successful
982 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
983 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
984 * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
985 * @post connection_closed_cb() will be invoked.
986 * @see connection_closed_cb()
987 * @see connection_open_profile()
988 * @see connection_profile_set_state_changed_cb()
989 * @see connection_profile_unset_state_changed_cb()
990 * @see connection_profile_state_changed_cb()
992 int connection_close_profile(connection_h connection, connection_profile_h profile,
993 connection_closed_cb callback, void* user_data);
997 * @brief Resets the cellular profile.
998 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
1000 * @privilege %http://tizen.org/privilege/network.profile \n
1001 * %http://tizen.org/privilege/network.get
1002 * @remarks This API needs both privileges.
1003 * @param[in] connection The connection handle
1004 * @param[in] type The type of reset
1005 * @param[in] id The subscriber identity module ID to reset
1006 * (The sim index starts from 0.)
1007 * @param[in] callback The callback function to be called
1008 * @param[in] user_data The user data passed to the callback function
1009 * @return @c 0 on success,
1010 * otherwise a negative error value
1011 * @retval #CONNECTION_ERROR_NONE Successful
1012 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
1013 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
1014 * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
1015 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
1016 * @post connection_reset_cb() will be invoked.
1018 int connection_reset_profile(connection_h connection, connection_reset_option_e type,
1019 int id, connection_reset_cb callback, void *user_data);
1023 * @brief Adds a IPv4 route to the routing table.
1024 * @details You can get the @a interface_name from
1025 * connection_profile_get_network_interface_name() of opened profile.
1026 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
1028 * @privilege %http://tizen.org/privilege/network.set
1029 * @param[in] connection The connection handle
1030 * @param[in] interface_name The name of network interface
1031 * @param[in] host_address The IP address of the host
1032 * @return @c 0 on success,
1033 * otherwise a negative error value
1034 * @retval #CONNECTION_ERROR_NONE Successful
1035 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
1036 * @retval #CONNECTION_ERROR_ALREADY_EXISTS Already exists
1037 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
1038 * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
1039 * @see connection_profile_get_network_interface_name()
1041 int connection_add_route(connection_h connection, const char* interface_name,
1042 const char* host_address) TIZEN_DEPRECATED_API;
1046 * @deprecated Deprecated since 4.0. Use connection_remove_route_entry() instead.
1047 * @brief Removes a IPv4 route from the routing table.
1048 * @details You can get the @a interface_name from
1049 * connection_profile_get_network_interface_name() of opened profile.
1050 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
1052 * @privilege %http://tizen.org/privilege/network.set
1053 * @param[in] connection The connection handle
1054 * @param[in] interface_name The name of network interface
1055 * @param[in] host_address The IP address of the host
1056 * @return @c 0 on success,
1057 * otherwise a negative error value
1058 * @retval #CONNECTION_ERROR_NONE Successful
1059 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
1060 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
1061 * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
1062 * @see connection_profile_get_network_interface_name()
1064 int connection_remove_route(connection_h connection, const char* interface_name, const char* host_address);
1068 * @deprecated Deprecated since 4.0. Use connection_add_route_entry() instead.
1069 * @brief Adds a IPv6 route to the routing table.
1070 * @details You can get the @a interface_name from
1071 * connection_profile_get_network_interface_name() of opened profile.
1072 * @since_tizen 2.3.1
1074 * @privilege %http://tizen.org/privilege/network.set
1075 * @param[in] connection The connection handle
1076 * @param[in] interface_name The name of network interface
1077 * @param[in] host_address The IP address of the host
1078 * @param[in] gateway The gateway address
1079 * @return @c 0 on success,
1080 * otherwise a negative error value
1081 * @retval #CONNECTION_ERROR_NONE Successful
1082 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
1083 * @retval #CONNECTION_ERROR_ALREADY_EXISTS Already exists
1084 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
1085 * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
1086 * @see connection_profile_get_network_interface_name()
1088 int connection_add_route_ipv6(connection_h connection, const char *interface_name,
1089 const char *host_address, const char * gateway) TIZEN_DEPRECATED_API;
1093 * @deprecated Deprecated since 4.0. Use connection_remove_route_entry() instead.
1094 * @brief Removes a IPV6 route from the routing table.
1095 * @details You can get the @a interface_name from
1096 * connection_profile_get_network_interface_name() of opened profile.
1097 * @since_tizen 2.3.1
1099 * @privilege %http://tizen.org/privilege/network.set
1100 * @param[in] connection The connection handle
1101 * @param[in] interface_name The name of network interface
1102 * @param[in] host_address The IP address of the host
1103 * @param[in] gateway The gateway address
1104 * @return @c 0 on success,
1105 * otherwise a negative error value
1106 * @retval #CONNECTION_ERROR_NONE Successful
1107 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
1108 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
1109 * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
1110 * @see connection_profile_get_network_interface_name()
1112 int connection_remove_route_ipv6(connection_h connection, const char *interface_name,
1113 const char *host_address, const char * gateway) TIZEN_DEPRECATED_API;
1116 * @brief Adds a route to the routing table.
1117 * @details You can get the @a interface_name from \n
1118 * connection_profile_get_network_interface_name() of opened profile.
1121 * @privilege %http://tizen.org/privilege/network.set
1122 * @param[in] connection The connection handle
1123 * @param[in] address_family The address family
1124 * @param[in] interface_name The name of network interface
1125 * @param[in] host_address The IP address of the host (e.g., single IP address such as
1126 * 163.152.10.2,192.168.1.2), group's IP address (e.g., 163.152.10.0, 192.168.0.0)
1128 * @param[in] gateway The gateway address
1129 * @return @c 0 on success,
1130 * otherwise a negative error value
1131 * @retval #CONNECTION_ERROR_NONE Successful
1132 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
1133 * @retval #CONNECTION_ERROR_ALREADY_EXISTS Already exists
1134 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
1135 * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
1136 * @see connection_profile_get_network_interface_name()
1138 int connection_add_route_entry(connection_h connection,
1139 connection_address_family_e address_family, const char *interface_name,
1140 const char *host_address, const char *gateway);
1143 * @brief Removes a route from the routing table.
1144 * @details You can get the @a interface_name from \n
1145 * connection_profile_get_network_interface_name() of opened profile.
1148 * @privilege %http://tizen.org/privilege/network.set
1149 * @param[in] connection The connection handle
1150 * @param[in] address_family The address family
1151 * @param[in] interface_name The name of network interface
1152 * @param[in] host_address The IP address of the host (e.g., single IP address such as
1153 * 163.152.10.2,192.168.1.2), group's IP address (e.g., 163.152.10.0, 192.168.0.0)
1155 * @param[in] gateway The gateway address
1156 * @return @c 0 on success,
1157 * otherwise a negative error value
1158 * @retval #CONNECTION_ERROR_NONE Successful
1159 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
1160 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
1161 * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
1162 * @see connection_profile_get_network_interface_name()
1164 int connection_remove_route_entry(connection_h connection,
1165 connection_address_family_e address_family, const char *interface_name,
1166 const char *host_address, const char *gateway);
1169 * @brief Gets all IPv6 addresses assigned to the network interface.
1171 * @param[in] connection The connection handle
1172 * @param[in] connection_type The connection type
1173 * @param[in] callback The callback to be called for each IPv6 address
1174 * @param[in] user_data The user data passed to the callback function
1175 * @return 0 on success, otherwise negative error value.
1176 * @retval #CONNECTION_ERROR_NONE Successful
1177 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
1178 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
1179 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
1181 int connection_foreach_ipv6_address(connection_h connection, connection_type_e connection_type,
1182 connection_ipv6_address_cb callback, void *user_data);
1190 * @addtogroup CAPI_NETWORK_CONNECTION_STATISTICS_MODULE
1196 * @brief Gets the statistics information.
1197 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
1199 * @privilege %http://tizen.org/privilege/network.get
1200 * @param[in] connection The connection handle
1201 * @param[in] connection_type The type of connection \n
1202 * Only CONNECTION_TYPE_WIFI and CONNECTION_TYPE_CELLULAR are supported
1203 * @param[in] statistics_type The type of statistics
1204 * @param[out] size The received data size of the last cellular packet data connection (bytes)
1205 * @return @c 0 on success,
1206 * otherwise a negative error value
1207 * @retval #CONNECTION_ERROR_NONE Successful
1208 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
1209 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
1210 * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
1211 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
1213 int connection_get_statistics(connection_h connection, connection_type_e connection_type,
1214 connection_statistics_type_e statistics_type, long long* size);
1218 * @brief Resets the statistics information.
1219 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
1221 * @privilege %http://tizen.org/privilege/network.set
1222 * @remarks This API needs both privileges.
1223 * @param[in] connection The connection handle
1224 * @param[in] connection_type The type of connection \n
1225 * Only CONNECTION_TYPE_WIFI and CONNECTION_TYPE_CELLULAR are supported
1226 * @param[in] statistics_type The type of statistics
1227 * @return @c 0 on success,
1228 * otherwise a negative error value
1229 * @retval #CONNECTION_ERROR_NONE Successful
1230 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
1231 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
1232 * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
1233 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
1235 int connection_reset_statistics(connection_h connection, connection_type_e connection_type,
1236 connection_statistics_type_e statistics_type);
1244 #endif /* __cplusplus */