2 * Copyright (c) 2011-2013 Samsung Electronics Co., Ltd All Rights Reserved
4 * Licensed under the Apache License, Version 2.0 (the "License");
5 * you may not use this file except in compliance with the License.
6 * You may obtain a copy of the License at
8 * http://www.apache.org/licenses/LICENSE-2.0
10 * Unless required by applicable law or agreed to in writing, software
11 * distributed under the License is distributed on an "AS IS" BASIS,
12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 * See the License for the specific language governing permissions and
14 * limitations under the License.
18 #ifndef __TIZEN_NETWORK_CONNECTION_PROFILE_H__
19 #define __TIZEN_NETWORK_CONNECTION_PROFILE_H__
31 * @file connection_profile.h
36 * @addtogroup CAPI_NETWORK_CONNECTION_WIFI_PROFILE_MODULE
42 * @brief Enumeration for security type of Wi-Fi.
43 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
46 CONNECTION_WIFI_SECURITY_TYPE_NONE = 0, /**< Security disabled */
47 CONNECTION_WIFI_SECURITY_TYPE_WEP = 1, /**< WEP */
48 CONNECTION_WIFI_SECURITY_TYPE_WPA_PSK = 2, /**< WPA-PSK */
49 CONNECTION_WIFI_SECURITY_TYPE_WPA2_PSK = 3, /**< WPA2-PSK */
50 CONNECTION_WIFI_SECURITY_TYPE_EAP = 4, /**< EAP */
51 } connection_wifi_security_type_e;
55 * @brief Enumeration for encryption modes.
56 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
59 CONNECTION_WIFI_ENCRYPTION_TYPE_NONE = 0, /**< Encryption disabled */
60 CONNECTION_WIFI_ENCRYPTION_TYPE_WEP = 1, /**< WEP */
61 CONNECTION_WIFI_ENCRYPTION_TYPE_TKIP = 2, /**< TKIP */
62 CONNECTION_WIFI_ENCRYPTION_TYPE_AES = 3, /**< AES */
63 CONNECTION_WIFI_ENCRYPTION_TYPE_TKIP_AES_MIXED = 4, /**< TKIP and AES are both supported */
64 } connection_wifi_encryption_type_e;
73 * @addtogroup CAPI_NETWORK_CONNECTION_CELLULAR_PROFILE_MODULE
79 * @brief Enumeration for cellular service type.
80 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
83 CONNECTION_CELLULAR_SERVICE_TYPE_UNKNOWN = 0, /**< Unknown */
84 CONNECTION_CELLULAR_SERVICE_TYPE_INTERNET = 1, /**< Internet */
85 CONNECTION_CELLULAR_SERVICE_TYPE_MMS = 2, /**< MMS */
86 CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_INTERNET = 3, /**< Prepaid internet */
87 CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_MMS = 4, /**< Prepaid MMS */
88 CONNECTION_CELLULAR_SERVICE_TYPE_TETHERING = 5, /**< Tethering */
89 CONNECTION_CELLULAR_SERVICE_TYPE_APPLICATION = 6, /**< Specific application */
90 } connection_cellular_service_type_e;
94 * @brief Enumeration for cellular pdn type.
98 CONNECTION_CELLULAR_PDN_TYPE_UNKNOWN = 0,
99 CONNECTION_CELLULAR_PDN_TYPE_IPV4 = 1,
100 CONNECTION_CELLULAR_PDN_TYPE_IPV6 = 2,
101 CONNECTION_CELLULAR_PDN_TYPE_IPV4_IPv6 = 3,
102 } connection_cellular_pdn_type_e;
106 * @brief Enumeration for cellular authentication type.
107 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
110 CONNECTION_CELLULAR_AUTH_TYPE_NONE = 0, /**< No authentication */
111 CONNECTION_CELLULAR_AUTH_TYPE_PAP = 1, /**< PAP authentication */
112 CONNECTION_CELLULAR_AUTH_TYPE_CHAP = 2, /**< CHAP authentication */
113 } connection_cellular_auth_type_e;
122 * @addtogroup CAPI_NETWORK_CONNECTION_PROFILE_MODULE
128 * @brief The profile handle.
129 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
131 typedef void* connection_profile_h;
135 * @brief Enumeration for profile state type.
136 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
139 CONNECTION_PROFILE_STATE_DISCONNECTED = 0, /**< Disconnected state */
140 CONNECTION_PROFILE_STATE_ASSOCIATION = 1, /**< Association state */
141 CONNECTION_PROFILE_STATE_CONFIGURATION = 2, /**< Configuration state */
142 CONNECTION_PROFILE_STATE_CONNECTED = 3, /**< Connected state */
143 } connection_profile_state_e;
147 * @brief Enumeration for address family.
148 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
151 CONNECTION_ADDRESS_FAMILY_IPV4 = 0, /**< IPV4 Address type */
152 CONNECTION_ADDRESS_FAMILY_IPV6 = 1, /**< IPV6 Address type */
153 } connection_address_family_e;
157 * @brief Enumeration for IP configuration type.
158 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
161 CONNECTION_IP_CONFIG_TYPE_NONE = 0, /**< Not defined */
162 CONNECTION_IP_CONFIG_TYPE_STATIC = 1, /**< Manual IP configuration */
163 CONNECTION_IP_CONFIG_TYPE_DYNAMIC = 2, /**< Config IP using DHCP client*/
164 CONNECTION_IP_CONFIG_TYPE_AUTO = 3, /**< Config IP from Auto IP pool (169.254/16). Later with DHCP client, if available */
165 CONNECTION_IP_CONFIG_TYPE_FIXED = 4, /**< Indicates an IP address that can not be modified */
166 } connection_ip_config_type_e;
170 * @brief Enumeration for proxy method type.
171 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
174 CONNECTION_PROXY_TYPE_DIRECT = 0, /**< Direct connection */
175 CONNECTION_PROXY_TYPE_AUTO = 1, /**< Auto configuration(Use PAC file). If URL property is not set, DHCP/WPAD auto-discover will be tried */
176 CONNECTION_PROXY_TYPE_MANUAL = 2, /**< Manual configuration */
177 } connection_proxy_type_e;
180 * @brief Enumeration for DNS configuration type.
185 CONNECTION_DNS_CONFIG_TYPE_NONE = 0, /**< Not defined */
186 CONNECTION_DNS_CONFIG_TYPE_STATIC = 1, /**< Manual DNS configuration */
187 CONNECTION_DNS_CONFIG_TYPE_DYNAMIC = 2, /**< Config DNS using DHCP client*/
188 } connection_dns_config_type_e;
191 * @brief Enumeration for network connection type.
192 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
195 CONNECTION_PROFILE_TYPE_CELLULAR = 0, /**< Cellular type */
196 CONNECTION_PROFILE_TYPE_WIFI = 1, /**< Wi-Fi type */
197 CONNECTION_PROFILE_TYPE_ETHERNET = 2, /**< Ethernet type */
198 CONNECTION_PROFILE_TYPE_BT = 3, /**< Bluetooth type */
199 } connection_profile_type_e;
203 * @brief Creates a profile handle.
204 * @details The profile name, which you get from connection_profile_get_name(), will include the keyword you set.
205 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
207 * @privilege %http://tizen.org/privilege/network.get
208 * @remarks You must release @a profile using connection_profile_destroy().
209 * @param[in] type The type of profile \n
210 * #CONNECTION_PROFILE_TYPE_CELLULAR and #CONNECTION_PROFILE_TYPE_WIFI are supported
211 * @param[in] keyword The keyword included in profile name
212 * @param[out] profile The handle of the profile
213 * @return @c 0 on success,
214 * otherwise negative error value
215 * @retval #CONNECTION_ERROR_NONE Successful
216 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
217 * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
218 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
219 * @see connection_profile_destroy()
220 * @see connection_profile_get_name()
222 int connection_profile_create(connection_profile_type_e type, const char* keyword, connection_profile_h* profile);
226 * @brief Destroys a profile handle.
227 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
228 * @param[out] profile The handle to the profile
229 * @return @c 0 on success,
230 * otherwise a negative error value
231 * @retval #CONNECTION_ERROR_NONE Successful
232 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
233 * @see connection_profile_create()
235 int connection_profile_destroy(connection_profile_h profile);
239 * @brief Clones a profile handle.
241 * @remarks You must release @a cloned_profile using connection_profile_destroy().
242 * @param[out] cloned_profile The handle of the cloned profile
243 * @param[in] origin_profile The handle of the origin profile
244 * @return @c 0 on success,
245 * otherwise a negative error value
246 * @retval #CONNECTION_ERROR_NONE Successful
247 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
248 * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
249 * @see connection_profile_destroy()
251 int connection_profile_clone(connection_profile_h* cloned_profile, connection_profile_h origin_profile);
255 * @brief Gets the profile ID.
256 * @details The separate profiles can have the same name.
257 * So, you must use this API instead of connection_profile_get_name() if you want to get the unique identification.
258 * In case you create a profile, this value will be determined when you add the profile.
259 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
260 * @remarks You must release @a profile_id using free().
261 * @param[in] profile The profile handle
262 * @param[out] profile_id The ID of the profile
263 * @return @c 0 on success,
264 * otherwise a negative error value
265 * @retval #CONNECTION_ERROR_NONE Successful
266 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
267 * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
268 * @see connection_profile_get_name()
269 * @see connection_add_profile()
271 int connection_profile_get_id(connection_profile_h profile, char** profile_id);
275 * @brief Gets the profile name.
276 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
277 * @remarks You must release @a profile_name using free().
278 * @param[in] profile The profile handle
279 * @param[out] profile_name The name of the profile
280 * @return @c 0 on success,
281 * otherwise a negative error value
282 * @retval #CONNECTION_ERROR_NONE Successful
283 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
284 * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
285 * @see connection_profile_get_id()
287 int connection_profile_get_name(connection_profile_h profile, char** profile_name);
291 * @brief Gets the network type.
292 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
293 * @param[in] profile The profile handle
294 * @param[out] type The type of the profile
295 * @return @c 0 on success,
296 * otherwise a negative error value
297 * @retval #CONNECTION_ERROR_NONE Successful
298 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
299 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
301 int connection_profile_get_type(connection_profile_h profile, connection_profile_type_e* type);
305 * @brief Gets the name of the network interface, e.g. eth0 and pdp0.
306 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
307 * @remarks You must release @a interface_name using free().
308 * @param[in] profile The profile handle
309 * @param[out] interface_name The name of the network interface
310 * @return @c 0 on success,
311 * otherwise a negative error value
312 * @retval #CONNECTION_ERROR_NONE Successful
313 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
314 * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
316 int connection_profile_get_network_interface_name(connection_profile_h profile, char** interface_name);
320 * @brief Refreshes the profile information.
321 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
323 * @privilege %http://tizen.org/privilege/network.get
324 * @remarks You should call this function in order to get the current information because the profile information can be changed.
325 * @param[in] profile The profile handle
326 * @return @c 0 on success,
327 * otherwise a negative error value
328 * @retval #CONNECTION_ERROR_NONE Successful
329 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
330 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
331 * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
332 * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
334 int connection_profile_refresh(connection_profile_h profile);
338 * @brief Gets the network type.
339 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
340 * @param[in] profile The profile handle
341 * @param[out] state The state of the profile
342 * @return @c 0 on success,
343 * otherwise a negative error value
344 * @retval #CONNECTION_ERROR_NONE Successful
345 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
346 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
348 int connection_profile_get_state(connection_profile_h profile, connection_profile_state_e* state);
352 * @brief Gets the IP config type.
353 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
354 * @param[in] profile The profile handle
355 * @param[in] address_family The address family
356 * @param[out] type The type of the IP config
357 * @return @c 0 on success,
358 * otherwise a negative error value
359 * @retval #CONNECTION_ERROR_NONE Successful
360 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
361 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
363 int connection_profile_get_ip_config_type(connection_profile_h profile, connection_address_family_e address_family, connection_ip_config_type_e* type);
367 * @brief Gets the IP address.
368 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
369 * @remarks You must release @a ip_address using free().
370 * @param[in] profile The profile handle
371 * @param[in] address_family The address family
372 * @param[out] ip_address The IP address
373 * @return @c 0 on success,
374 * otherwise a negative error value
375 * @retval #CONNECTION_ERROR_NONE Successful
376 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
377 * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
378 * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
379 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
381 int connection_profile_get_ip_address(connection_profile_h profile, connection_address_family_e address_family, char** ip_address);
385 * @brief Gets the Subnet Mask.
386 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
387 * @remarks You must release @a subnet_mask using free().
388 * @param[in] profile The profile handle
389 * @param[in] address_family The address family
390 * @param[out] subnet_mask The subnet mask
391 * @return @c 0 on success,
392 * otherwise a negative error value
393 * @retval #CONNECTION_ERROR_NONE Successful
394 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
395 * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
396 * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
397 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
399 int connection_profile_get_subnet_mask(connection_profile_h profile, connection_address_family_e address_family, char** subnet_mask);
403 * @brief Gets the Gateway address.
404 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
405 * @remarks You must release @a gateway_address using free().
406 * @param[in] profile The profile handle
407 * @param[in] address_family The address family
408 * @param[out] gateway_address The gateway address
409 * @return @c 0 on success,
410 * otherwise a negative error value
411 * @retval #CONNECTION_ERROR_NONE Successful
412 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
413 * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
414 * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
415 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
417 int connection_profile_get_gateway_address(connection_profile_h profile, connection_address_family_e address_family, char** gateway_address);
421 * @brief Gets the DNS address.
422 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
423 * @remarks The allowance of the DNS address is @c 2. You must release @a dns_address using free().
424 * @param[in] profile The profile handle
425 * @param[in] order The order of DNS address \n
426 * it starts from 1, which means first DNS address
427 * @param[in] address_family The address family
428 * @param[out] dns_address The DNS address
429 * @return @c 0 on success,
430 * otherwise a negative error value
431 * @retval #CONNECTION_ERROR_NONE Successful
432 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
433 * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
434 * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
435 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
437 int connection_profile_get_dns_address(connection_profile_h profile, int order, connection_address_family_e address_family, char** dns_address);
441 * @brief Gets the Proxy type.
442 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
443 * @param[in] profile The profile handle
444 * @param[out] type The type of the proxy
445 * @return @c 0 on success,
446 * otherwise a negative error value
447 * @retval #CONNECTION_ERROR_NONE Successful
448 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
449 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
451 int connection_profile_get_proxy_type(connection_profile_h profile, connection_proxy_type_e* type);
455 * @brief Gets the Proxy address.
456 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
457 * @remarks You must release @a proxy_address using free().
458 * @param[in] profile The profile handle
459 * @param[in] address_family The address family
460 * @param[out] proxy_address The proxy address
461 * @return @c 0 on success,
462 * otherwise a negative error value
463 * @retval #CONNECTION_ERROR_NONE Successful
464 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
465 * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
466 * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
467 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
469 int connection_profile_get_proxy_address(connection_profile_h profile, connection_address_family_e address_family, char** proxy_address);
473 * @brief Sets the IP config type.
474 * @details If you set IP config type to #CONNECTION_IP_CONFIG_TYPE_STATIC,
475 * then IP address, Gateway and Subnet mask will be set to the initial value "0.0.0.0".
476 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
477 * @param[in] profile The profile handle
478 * @param[in] address_family The address family
479 * @param[in] type The type of the IP config
480 * @return @c 0 on success,
481 * otherwise a negative error value
482 * @retval #CONNECTION_ERROR_NONE Successful
483 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
484 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
486 int connection_profile_set_ip_config_type(connection_profile_h profile, connection_address_family_e address_family, connection_ip_config_type_e type);
490 * @brief Sets the IP address.
491 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
492 * @param[in] profile The profile handle
493 * @param[in] address_family The address family
494 * @param[in] ip_address The IP address. \n
495 * If you set this value to @c NULL, then the existing value will be deleted
496 * @return @c 0 on success,
497 * otherwise a negative error value
498 * @retval #CONNECTION_ERROR_NONE Successful
499 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
500 * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
501 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
502 * @see connection_update_profile()
504 int connection_profile_set_ip_address(connection_profile_h profile, connection_address_family_e address_family, const char* ip_address);
508 * @brief Sets the Subnet Mask.
509 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
510 * @param[in] profile The profile handle
511 * @param[in] address_family The address family
512 * @param[in] subnet_mask The subnet mask. \n
513 * If you set this value to @c NULL, then the existing value will be deleted
514 * @return @c 0 on success,
515 * otherwise a negative error value
516 * @retval #CONNECTION_ERROR_NONE Successful
517 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
518 * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
519 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
520 * @see connection_update_profile()
522 int connection_profile_set_subnet_mask(connection_profile_h profile, connection_address_family_e address_family, const char* subnet_mask);
526 * @brief Sets the Gateway address.
527 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
528 * @param[in] profile The profile handle
529 * @param[in] address_family The address family
530 * @param[in] gateway_address The gateway address. \n
531 * If you set this value to @c NULL, then the existing value will be deleted
532 * @return @c 0 on success,
533 * otherwise a negative error value
534 * @retval #CONNECTION_ERROR_NONE Successful
535 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
536 * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
537 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
538 * @see connection_update_profile()
540 int connection_profile_set_gateway_address(connection_profile_h profile, connection_address_family_e address_family, const char* gateway_address);
544 * @brief Sets the DNS address.
545 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
546 * @remarks The allowance of the DNS address is @c 2.
547 * @param[in] profile The profile handle
548 * @param[in] order The order of the DNS address. \n
549 * It starts from @c 1, which means first DNS address
550 * @param[in] address_family The address family
551 * @param[in] dns_address The DNS address; if you set this value to NULL, then the existing value will be deleted
552 * @return @c 0 on success,
553 * otherwise a negative error value
554 * @retval #CONNECTION_ERROR_NONE Successful
555 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
556 * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
557 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
558 * @see connection_update_profile()
560 int connection_profile_set_dns_address(connection_profile_h profile, int order, connection_address_family_e address_family, const char* dns_address);
564 * @brief Sets the Proxy type.
565 * @details If you set the Proxy type to #CONNECTION_PROXY_TYPE_AUTO or #CONNECTION_PROXY_TYPE_MANUAL, then Proxy will be restored.
566 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
567 * @param[in] profile The profile handle
568 * @param[in] type The type of the proxy
569 * @return @c 0 on success,
570 * otherwise a negative error value
571 * @retval #CONNECTION_ERROR_NONE Successful
572 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
573 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
574 * @see connection_update_profile()
576 int connection_profile_set_proxy_type(connection_profile_h profile, connection_proxy_type_e type);
580 * @brief Sets the Proxy address.
581 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
582 * @param[in] profile The profile handle
583 * @param[in] address_family The address family
584 * @param[in] proxy_address The proxy address. \n
585 * If you set this value to @c NULL, then the existing value will be deleted
586 * @return @c 0 on success,
587 * otherwise a negative error value
588 * @retval #CONNECTION_ERROR_NONE Successful
589 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
590 * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
591 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
592 * @see connection_update_profile()
594 int connection_profile_set_proxy_address(connection_profile_h profile, connection_address_family_e address_family, const char* proxy_address);
598 * @brief Called when the state of the profile is changed.
599 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
600 * @param[in] state The state
601 * @param[in] user_data The user data passed from the callback registration function
602 * @see connection_profile_set_state_changed_cb()
603 * @see connection_profile_unset_state_changed_cb()
605 typedef void(*connection_profile_state_changed_cb)(connection_profile_state_e state, void* user_data);
609 * @brief Registers the callback that is called when the state of profile is changed.
610 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
611 * @param[in] profile The profile handle
612 * @param[in] callback The callback function to be called
613 * @param[in] user_data The user data passed to the callback function
614 * @return @c 0 on success,
615 * otherwise a negative error value
616 * @retval #CONNECTION_ERROR_NONE Successful
617 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
618 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
619 * @post connection_opened_cb() is invoked when the state of profile is changed.
620 * @see connection_profile_state_changed_cb()
621 * @see connection_profile_unset_state_changed_cb()
623 int connection_profile_set_state_changed_cb(connection_profile_h profile, connection_profile_state_changed_cb callback, void* user_data);
627 * @brief Unregisters the callback that is called when the state of profile is changed.
628 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
629 * @param[in] profile The profile handle
630 * @return @c 0 on success,
631 * otherwise a negative error value
632 * @retval #CONNECTION_ERROR_NONE Successful
633 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
634 * @see connection_profile_state_changed_cb()
635 * @see connection_profile_set_state_changed_cb()
637 int connection_profile_unset_state_changed_cb(connection_profile_h profile);
640 * @brief Gets the IPv6 network state.
642 * @param[in] profile The profile handle
643 * @param[out] state The profile state
644 * @return 0 on success, otherwise negative error value.
645 * @retval #CONNECTION_ERROR_NONE Successful
646 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
647 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
648 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
650 int connection_profile_get_ipv6_state(connection_profile_h profile, connection_profile_state_e *state);
653 * @brief Sets the DNS config type.
655 * @param[in] profile The profile handle
656 * @param[in] address_family The address family
657 * @param[in] type The DNS config type
658 * @return 0 on success, otherwise negative error value.
659 * @retval #CONNECTION_ERROR_NONE Successful
660 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
661 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
662 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
664 int connection_profile_set_dns_config_type(connection_profile_h profile,
665 connection_address_family_e address_family, connection_dns_config_type_e type);
668 * @brief Gets the DNS config type.
670 * @param[in] profile The profile handle
671 * @param[in] address_family The address family
672 * @param[out] type The DNS config type
673 * @return 0 on success, otherwise negative error value.
674 * @retval #CONNECTION_ERROR_NONE Successful
675 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
676 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
677 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
679 int connection_profile_get_dns_config_type(connection_profile_h profile,
680 connection_address_family_e address_family, connection_dns_config_type_e *type);
683 * @brief Gets the network prefix length.
685 * @param[in] profile The profile handle
686 * @param[in] address_family The address family
687 * @param[out] prefix_len The network prefix length.
688 * In case of IPv4, it means netmask length
689 * (also called a prefix, e.g. 8, 16, 24, 32)
690 * @return 0 on success, otherwise negative error value.
691 * @retval #CONNECTION_ERROR_NONE Successful
692 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
693 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
694 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
696 int connection_profile_get_prefix_length(connection_profile_h profile,
697 connection_address_family_e address_family, int *prefix_len);
700 * @brief Sets the network prefix length.
702 * @param[in] profile The profile handle
703 * @param[in] address_family The address family
704 * @param[in] prefix_len The network prefix length.
705 * In case of IPv4, it means netmask length
706 * (also called a prefix, e.g. 8, 16, 24, 32)
707 * @return 0 on success, otherwise negative error value.
708 * @retval #CONNECTION_ERROR_NONE Successful
709 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
710 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
711 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
712 * @see connection_update_profile()
714 int connection_profile_set_prefix_length(connection_profile_h profile,
715 connection_address_family_e address_family, int prefix_len);
723 * @addtogroup CAPI_NETWORK_CONNECTION_WIFI_PROFILE_MODULE
729 * @brief Gets the ESSID (Extended Service Set Identifier).
730 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
731 * @remarks You must release @a essid using free().
732 * @param[in] profile The profile handle
733 * @param[out] essid The ESSID
734 * @return @c 0 on success,
735 * otherwise a negative error value
736 * @retval #CONNECTION_ERROR_NONE Successful
737 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
738 * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
739 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
741 int connection_profile_get_wifi_essid(connection_profile_h profile, char** essid);
745 * @brief Gets the BSSID (Basic Service Set Identifier).
746 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
747 * @remarks You must release @a bssid using free().
748 * @param[in] profile The profile handle
749 * @param[out] bssid The BSSID
750 * @return @c 0 on success,
751 * otherwise a negative error value
752 * @retval #CONNECTION_ERROR_NONE Successful
753 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
754 * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
755 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
757 int connection_profile_get_wifi_bssid(connection_profile_h profile, char** bssid);
761 * @brief Gets the RSSI.
762 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
763 * @param[in] profile The profile handle
764 * @param[out] rssi The RSSI
765 * @return @c 0 on success,
766 * otherwise a negative error value
767 * @retval #CONNECTION_ERROR_NONE Successful
768 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
769 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
771 int connection_profile_get_wifi_rssi(connection_profile_h profile, int* rssi);
775 * @brief Gets the frequency (MHz).
776 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
777 * @param[in] profile The profile handle
778 * @param[out] frequency The frequency
779 * @return @c 0 on success,
780 * otherwise a negative error value
781 * @retval #CONNECTION_ERROR_NONE Successful
782 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
783 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
785 int connection_profile_get_wifi_frequency(connection_profile_h profile, int* frequency);
789 * @brief Gets the max speed (Mbps).
790 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
791 * @param[in] profile The profile handle
792 * @param[out] max_speed The max speed
793 * @return @c 0 on success,
794 * otherwise a negative error value
795 * @retval #CONNECTION_ERROR_NONE Successful
796 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
797 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
799 int connection_profile_get_wifi_max_speed(connection_profile_h profile, int* max_speed);
803 * @brief Gets the security mode of Wi-Fi.
804 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
805 * @param[in] profile The profile handle
806 * @param[out] type The type of Wi-Fi security
807 * @return @c 0 on success,
808 * otherwise a negative error value
809 * @retval #CONNECTION_ERROR_NONE Successful
810 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
811 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
812 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
814 int connection_profile_get_wifi_security_type(connection_profile_h profile, connection_wifi_security_type_e* type);
818 * @brief Gets the security mode of Wi-Fi.
819 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
820 * @param[in] profile The profile handle
821 * @param[out] type The type of Wi-Fi security
822 * @return @c 0 on success,
823 * otherwise a negative error value
824 * @retval #CONNECTION_ERROR_NONE Successful
825 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
826 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
827 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
829 int connection_profile_get_wifi_encryption_type(connection_profile_h profile, connection_wifi_encryption_type_e* type);
833 * @brief Checks whether passphrase is required.
834 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
835 * @remarks This function is not valid if security type is #CONNECTION_WIFI_SECURITY_TYPE_EAP.
836 * @param[in] profile The profile handle
837 * @param[out] required @c true if a passphrase is required,
838 * otherwise @c false if a passphrase is not required
839 * @return @c 0 on success,
840 * otherwise a negative error value
841 * @retval #CONNECTION_ERROR_NONE Successful
842 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
843 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
845 int connection_profile_is_wifi_passphrase_required(connection_profile_h profile, bool* required);
849 * @brief Sets the passphrase of the Wi-Fi WPA.
850 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
851 * @param[in] profile The profile handle
852 * @param[in] passphrase The passphrase of Wi-Fi security
853 * @return @c 0 on success,
854 * otherwise a negative error value
855 * @retval #CONNECTION_ERROR_NONE Successful
856 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
857 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
858 * @see connection_update_profile()
860 int connection_profile_set_wifi_passphrase(connection_profile_h profile, const char* passphrase);
864 * @brief Checks whether the WPS (Wi-Fi Protected Setup) is supported.
865 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
866 * @remarks If WPS is supported, you can connect the access point with WPS by wifi_connect_with_wps().
867 * @param[in] profile The profile handle
868 * @param[out] supported @c true if WPS is supported,
869 * otherwise @c false if WPS is not supported
870 * @return @c 0 on success,
871 * otherwise negative error value
872 * @retval #CONNECTION_ERROR_NONE Successful
873 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
874 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
876 int connection_profile_is_wifi_wps_supported(connection_profile_h profile, bool* supported);
885 * @addtogroup CAPI_NETWORK_CONNECTION_CELLULAR_PROFILE_MODULE
891 * @brief Gets the service type.
892 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
893 * @param[in] profile The profile handle
894 * @param[out] type The type of the cellular service
895 * @return @c 0 on success,
896 * otherwise a negative error value
897 * @retval #CONNECTION_ERROR_NONE Successful
898 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
899 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
900 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
902 int connection_profile_get_cellular_service_type(connection_profile_h profile, connection_cellular_service_type_e* type);
906 * @brief Gets the APN (access point name).
907 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
908 * @remarks You must release @a apn using free().
909 * @param[in] profile The profile handle
910 * @param[out] apn The name of the APN
911 * @return @c 0 on success,
912 * otherwise a negative error value
913 * @retval #CONNECTION_ERROR_NONE Successful
914 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
915 * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
916 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
918 int connection_profile_get_cellular_apn(connection_profile_h profile, char** apn);
922 * @brief Gets the authentication information.
923 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
924 * @remarks You must release @a user_name and @a password using free().
925 * @param[in] profile The profile handle
926 * @param[out] type The type of the authentication
927 * @param[out] user_name The user name
928 * @param[out] password The password
929 * @return @c 0 on success,
930 * otherwise a negative error value
931 * @retval #CONNECTION_ERROR_NONE Successful
932 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
933 * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
934 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
935 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
937 int connection_profile_get_cellular_auth_info(connection_profile_h profile, connection_cellular_auth_type_e* type, char** user_name, char** password);
941 * @brief Gets the home URL.
942 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
943 * @remarks You must release @a home_url using free().
944 * @param[in] profile The profile handle
945 * @param[out] home_url The home URL
946 * @return @c 0 on success,
947 * otherwise a negative error value
948 * @retval #CONNECTION_ERROR_NONE Successful
949 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
950 * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
951 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
953 int connection_profile_get_cellular_home_url(connection_profile_h profile, char** home_url);
957 * @brief Gets the cellular pdn type.
959 * @param[in] profile The profile handle
960 * @param[out] type The cellular pdn type
961 * @return @c 0 on success,
962 * otherwise negative error value
963 * @retval #CONNECTION_ERROR_NONE Successful
964 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
965 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
966 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
968 int connection_profile_get_cellular_pdn_type(connection_profile_h profile, connection_cellular_pdn_type_e* type);
972 * @brief Gets the cellular roam pdn type.
974 * @param[in] profile The profile handle
975 * @param[out] type The cellular pdn type
976 * @return @c 0 on success,
977 * otherwise negative error value
978 * @retval #CONNECTION_ERROR_NONE Successful
979 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
980 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
981 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
983 int connection_profile_get_cellular_roam_pdn_type(connection_profile_h profile, connection_cellular_pdn_type_e* type);
987 * @brief Checks whether the connection is in roaming state.
988 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
989 * @param[in] profile The profile handle
990 * @param[out] is_roaming @c true if the cellular is roaming,
991 * otherwise @c false if it is not roaming
992 * @return @c 0 on success,
993 * otherwise a negative error value
994 * @retval #CONNECTION_ERROR_NONE Successful
995 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
996 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
998 int connection_profile_is_cellular_roaming(connection_profile_h profile, bool* is_roaming);
1002 * @brief Checks whether the profile is hidden.
1003 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
1004 * @param[in] profile The profile handle
1005 * @param[out] is_hidden @c true if the profile is in hidden,
1006 * otherwise @c false if the profile is not hidden
1007 * @return @c 0 on success,
1008 * otherwise a negative error value
1009 * @retval #CONNECTION_ERROR_NONE Successful
1010 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
1011 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
1013 int connection_profile_is_cellular_hidden(connection_profile_h profile, bool* is_hidden);
1017 * @brief Checks whether the profile is editable.
1018 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
1019 * @param[in] profile The profile handle
1020 * @param[out] is_editable @c true if the profile is editable,
1021 * otherwise @c false if the profile is not editable
1022 * @return @c 0 on success,
1023 * otherwise a negative error value
1024 * @retval #CONNECTION_ERROR_NONE Successful
1025 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
1026 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
1028 int connection_profile_is_cellular_editable(connection_profile_h profile, bool* is_editable);
1032 * @brief Checks whether the profile is default.
1033 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
1034 * @param[in] profile The profile handle
1035 * @param[out] is_default @c true if the profile is default,
1036 * otherwise @c false if the profile is not default
1037 * @return @c 0 on success,
1038 * otherwise a negative error value
1039 * @retval #CONNECTION_ERROR_NONE Successful
1040 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
1041 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
1043 int connection_profile_is_cellular_default(connection_profile_h profile, bool* is_default);
1047 * @brief Sets the service type.
1048 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
1049 * @param[in] profile The profile handle
1050 * @param[in] service_type The type of cellular service
1051 * @return @c 0 on success,
1052 * otherwise a negative error value
1053 * @retval #CONNECTION_ERROR_NONE Successful
1054 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
1055 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
1056 * @see connection_update_profile()
1058 int connection_profile_set_cellular_service_type(connection_profile_h profile, connection_cellular_service_type_e service_type);
1062 * @brief Sets the APN (Access Point Name).
1063 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
1064 * @param[in] profile The profile handle
1065 * @param[in] apn The name of APN
1066 * @return @c 0 on success,
1067 * otherwise a negative error value
1068 * @retval #CONNECTION_ERROR_NONE Successful
1069 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
1070 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
1071 * @see connection_update_profile()
1073 int connection_profile_set_cellular_apn(connection_profile_h profile, const char* apn);
1077 * @brief Sets the Authentication information.
1078 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
1079 * @param[in] profile The profile handle
1080 * @param[in] type The type of the authentication
1081 * @param[in] user_name The user name
1082 * @param[in] password The password
1083 * @return @c 0 on success,
1084 * otherwise a negative error value
1085 * @retval #CONNECTION_ERROR_NONE Successful
1086 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
1087 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
1088 * @see connection_update_profile()
1090 int connection_profile_set_cellular_auth_info(connection_profile_h profile, connection_cellular_auth_type_e type, const char* user_name, const char* password);
1094 * @brief Sets the home URL.
1095 * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
1096 * @param[in] profile The profile handle
1097 * @param[in] home_url The home URL
1098 * @return @c 0 on success,
1099 * otherwise a negative error value
1100 * @retval #CONNECTION_ERROR_NONE Successful
1101 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
1102 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
1103 * @see connection_update_profile()
1105 int connection_profile_set_cellular_home_url(connection_profile_h profile, const char* home_url);
1109 * @brief Sets the cellular pdn type.
1111 * @param[in] profile The profile handle
1112 * @param[in] type The cellular pdn type
1113 * @return @c 0 on success,
1114 * otherwise negative error value
1115 * @retval #CONNECTION_ERROR_NONE Successful
1116 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
1117 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
1118 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
1120 int connection_profile_set_cellular_pdn_type(connection_profile_h profile, connection_cellular_pdn_type_e type);
1124 * @brief Sets the cellular roam pdn type.
1126 * @param[in] profile The profile handle
1127 * @param[in] type The cellular pdn type
1128 * @return @c 0 on success,
1129 * otherwise negative error value
1130 * @retval #CONNECTION_ERROR_NONE Successful
1131 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
1132 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
1133 * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission Denied
1134 * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not Supported
1136 int connection_profile_set_cellular_roam_pdn_type(connection_profile_h profile, connection_cellular_pdn_type_e type);
1151 #endif /* __TIZEN_NETWORK_CONNECTION_PROFILE_H__ */