-/*
- * drivers/net/phy/phy.c
- *
- * Framework for configuring and reading PHY devices
+/* Framework for configuring and reading PHY devices
* Based on code in sungem_phy.c and gianfar_phy.c
*
* Author: Andy Fleming
#include <linux/timer.h>
#include <linux/workqueue.h>
#include <linux/mdio.h>
-
+#include <linux/io.h>
+#include <linux/uaccess.h>
#include <linux/atomic.h>
-#include <asm/io.h>
+
#include <asm/irq.h>
-#include <asm/uaccess.h>
/**
* phy_print_status - Convenience function to print out the current phy status
*/
void phy_print_status(struct phy_device *phydev)
{
- if (phydev->link)
+ if (phydev->link) {
pr_info("%s - Link is Up - %d/%s\n",
dev_name(&phydev->dev),
phydev->speed,
DUPLEX_FULL == phydev->duplex ? "Full" : "Half");
- else
+ } else {
pr_info("%s - Link is Down\n", dev_name(&phydev->dev));
+ }
}
EXPORT_SYMBOL(phy_print_status);
}
/* A structure for mapping a particular speed and duplex
- * combination to a particular SUPPORTED and ADVERTISED value */
+ * combination to a particular SUPPORTED and ADVERTISED value
+ */
struct phy_setting {
int speed;
int duplex;
int idx = 0;
while (idx < ARRAY_SIZE(settings) &&
- (settings[idx].speed != speed ||
- settings[idx].duplex != duplex))
+ (settings[idx].speed != speed || settings[idx].duplex != duplex))
idx++;
return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1;
if (cmd->phy_address != phydev->addr)
return -EINVAL;
- /* We make sure that we don't pass unsupported
- * values in to the PHY */
+ /* We make sure that we don't pass unsupported values in to the PHY */
cmd->advertising &= phydev->supported;
/* Verify the settings we care about. */
* PHYCONTROL layer. It changes registers without regard to
* current state. Use at own risk.
*/
-int phy_mii_ioctl(struct phy_device *phydev,
- struct ifreq *ifr, int cmd)
+int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd)
{
struct mii_ioctl_data *mii_data = if_mii(ifr);
u16 val = mii_data->val_in;
if (mii_data->phy_id == phydev->addr) {
switch (mii_data->reg_num) {
case MII_BMCR:
- if ((val & (BMCR_RESET|BMCR_ANENABLE)) == 0)
+ if ((val & (BMCR_RESET | BMCR_ANENABLE)) == 0)
phydev->autoneg = AUTONEG_DISABLE;
else
phydev->autoneg = AUTONEG_ENABLE;
- if ((!phydev->autoneg) && (val & BMCR_FULLDPLX))
+ if (!phydev->autoneg && (val & BMCR_FULLDPLX))
phydev->duplex = DUPLEX_FULL;
else
phydev->duplex = DUPLEX_HALF;
- if ((!phydev->autoneg) &&
- (val & BMCR_SPEED1000))
+ if (!phydev->autoneg && (val & BMCR_SPEED1000))
phydev->speed = SPEED_1000;
- else if ((!phydev->autoneg) &&
- (val & BMCR_SPEED100))
+ else if (!phydev->autoneg &&
+ (val & BMCR_SPEED100))
phydev->speed = SPEED_100;
break;
case MII_ADVERTISE:
* function.
*/
void phy_start_machine(struct phy_device *phydev,
- void (*handler)(struct net_device *))
+ void (*handler)(struct net_device *))
{
phydev->adjust_state = handler;
/* The MDIO bus is not allowed to be written in interrupt
* context, so we need to disable the irq here. A work
* queue will write the PHY to disable and clear the
- * interrupt, and then reenable the irq line. */
+ * interrupt, and then reenable the irq line.
+ */
disable_irq_nosync(irq);
atomic_inc(&phydev->irq_disable);
free_irq(phydev->irq, phydev);
- /*
- * Cannot call flush_scheduled_work() here as desired because
+ /* Cannot call flush_scheduled_work() here as desired because
* of rtnl_lock(), but we do not really care about what would
* be done, except from enable_irq(), so cancel any work
* possibly pending and take care of the matter below.
*/
cancel_work_sync(&phydev->phy_queue);
- /*
- * If work indeed has been cancelled, disable_irq() will have
+ /* If work indeed has been cancelled, disable_irq() will have
* been left unbalanced from phy_interrupt() and enable_irq()
* has to be called so that other devices on the line work.
*/
out_unlock:
mutex_unlock(&phydev->lock);
- /*
- * Cannot call flush_scheduled_work() here as desired because
+ /* Cannot call flush_scheduled_work() here as desired because
* of rtnl_lock(), but PHY_HALTED shall guarantee phy_change()
* will not reenable interrupts.
*/
}
+EXPORT_SYMBOL(phy_stop);
/**
}
mutex_unlock(&phydev->lock);
}
-EXPORT_SYMBOL(phy_stop);
EXPORT_SYMBOL(phy_start);
/**
if (err < 0)
break;
- /* If the link is down, give up on
- * negotiation for now */
+ /* If the link is down, give up on negotiation for now */
if (!phydev->link) {
phydev->state = PHY_NOLINK;
netif_carrier_off(phydev->attached_dev);
break;
}
- /* Check if negotiation is done. Break
- * if there's an error */
+ /* Check if negotiation is done. Break if there's an error */
err = phy_aneg_done(phydev);
if (err < 0)
break;
} else if (0 == phydev->link_timeout--) {
needs_aneg = 1;
- /* If we have the magic_aneg bit,
- * we try again */
+ /* If we have the magic_aneg bit, we try again */
if (phydev->drv->flags & PHY_HAS_MAGICANEG)
break;
}
if (phy_interrupt_is_valid(phydev))
err = phy_config_interrupt(phydev,
- PHY_INTERRUPT_ENABLED);
+ PHY_INTERRUPT_ENABLED);
break;
case PHY_HALTED:
if (phydev->link) {
if (err)
break;
- err = phy_config_interrupt(phydev,
- PHY_INTERRUPT_ENABLED);
+ err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
if (err)
break;
break;
/* err > 0 if AN is done.
- * Otherwise, it's 0, and we're
- * still waiting for AN */
+ * Otherwise, it's 0, and we're still waiting for AN
+ */
if (err > 0) {
err = phy_read_status(phydev);
if (err)
if (phydev->link) {
phydev->state = PHY_RUNNING;
netif_carrier_on(phydev->attached_dev);
- } else
+ } else {
phydev->state = PHY_NOLINK;
+ }
phydev->adjust_link(phydev->attached_dev);
} else {
phydev->state = PHY_AN;
if (phydev->link) {
phydev->state = PHY_RUNNING;
netif_carrier_on(phydev->attached_dev);
- } else
+ } else {
phydev->state = PHY_NOLINK;
+ }
phydev->adjust_link(phydev->attached_dev);
}
break;
phy_error(phydev);
queue_delayed_work(system_power_efficient_wq, &phydev->state_queue,
- PHY_STATE_TIME * HZ);
+ PHY_STATE_TIME * HZ);
}
void phy_mac_interrupt(struct phy_device *phydev, int new_link)
{
return phy_read_mmd_indirect(phydev->bus, MDIO_PCS_EEE_WK_ERR,
MDIO_MMD_PCS, phydev->addr);
-
}
EXPORT_SYMBOL(phy_get_eee_err);
-/*
- * drivers/net/phy/phy_device.c
- *
- * Framework for finding and configuring PHYs.
+/* Framework for finding and configuring PHYs.
* Also contains generic PHY driver
*
* Author: Andy Fleming
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
-#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/uaccess.h>
MODULE_DESCRIPTION("PHY library");
MODULE_AUTHOR("Andy Fleming");
}
static struct phy_driver genphy_driver;
-extern int mdio_bus_init(void);
-extern void mdio_bus_exit(void);
static LIST_HEAD(phy_fixup_list);
static DEFINE_MUTEX(phy_fixup_lock);
static int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
u32 flags, phy_interface_t interface);
-/*
- * Creates a new phy_fixup and adds it to the list
+/**
+ * phy_register_fixup - creates a new phy_fixup and adds it to the list
* @bus_id: A string which matches phydev->dev.bus_id (or PHY_ANY_ID)
* @phy_uid: Used to match against phydev->phy_id (the UID of the PHY)
- * It can also be PHY_ANY_UID
+ * It can also be PHY_ANY_UID
* @phy_uid_mask: Applied to phydev->phy_id and fixup->phy_uid before
- * comparison
+ * comparison
* @run: The actual code to be run when a matching PHY is found
*/
int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
- int (*run)(struct phy_device *))
+ int (*run)(struct phy_device *))
{
struct phy_fixup *fixup;
- fixup = kzalloc(sizeof(struct phy_fixup), GFP_KERNEL);
+ fixup = kzalloc(sizeof(*fixup), GFP_KERNEL);
if (!fixup)
return -ENOMEM;
/* Registers a fixup to be run on any PHY with the UID in phy_uid */
int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
- int (*run)(struct phy_device *))
+ int (*run)(struct phy_device *))
{
return phy_register_fixup(PHY_ANY_ID, phy_uid, phy_uid_mask, run);
}
/* Registers a fixup to be run on the PHY with id string bus_id */
int phy_register_fixup_for_id(const char *bus_id,
- int (*run)(struct phy_device *))
+ int (*run)(struct phy_device *))
{
return phy_register_fixup(bus_id, PHY_ANY_UID, 0xffffffff, run);
}
EXPORT_SYMBOL(phy_register_fixup_for_id);
-/*
- * Returns 1 if fixup matches phydev in bus_id and phy_uid.
+/* Returns 1 if fixup matches phydev in bus_id and phy_uid.
* Fixups can be set to match any in one or more fields.
*/
static int phy_needs_fixup(struct phy_device *phydev, struct phy_fixup *fixup)
return 0;
if ((fixup->phy_uid & fixup->phy_uid_mask) !=
- (phydev->phy_id & fixup->phy_uid_mask))
+ (phydev->phy_id & fixup->phy_uid_mask))
if (fixup->phy_uid != PHY_ANY_UID)
return 0;
EXPORT_SYMBOL(phy_scan_fixups);
struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
- bool is_c45, struct phy_c45_device_ids *c45_ids)
+ bool is_c45,
+ struct phy_c45_device_ids *c45_ids)
{
struct phy_device *dev;
- /* We allocate the device, and initialize the
- * default values */
+ /* We allocate the device, and initialize the default values */
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (NULL == dev)
dev->speed = 0;
dev->duplex = -1;
- dev->pause = dev->asym_pause = 0;
+ dev->pause = 0;
+ dev->asym_pause = 0;
dev->link = 1;
dev->interface = PHY_INTERFACE_MODE_GMII;
INIT_WORK(&dev->phy_queue, phy_change);
/* Request the appropriate module unconditionally; don't
- bother trying to do so only if it isn't already loaded,
- because that gets complicated. A hotplug event would have
- done an unconditional modprobe anyway.
- We don't do normal hotplug because it won't work for MDIO
- -- because it relies on the device staying around for long
- enough for the driver to get loaded. With MDIO, the NIC
- driver will get bored and give up as soon as it finds that
- there's no driver _already_ loaded. */
+ * bother trying to do so only if it isn't already loaded,
+ * because that gets complicated. A hotplug event would have
+ * done an unconditional modprobe anyway.
+ * We don't do normal hotplug because it won't work for MDIO
+ * -- because it relies on the device staying around for long
+ * enough for the driver to get loaded. With MDIO, the NIC
+ * driver will get bored and give up as soon as it finds that
+ * there's no driver _already_ loaded.
+ */
request_module(MDIO_MODULE_PREFIX MDIO_ID_FMT, MDIO_ID_ARGS(phy_id));
device_initialize(&dev->dev);
if (is_c45)
return get_phy_c45_ids(bus, addr, phy_id, c45_ids);
- /* Grab the bits from PHYIR1, and put them
- * in the upper half */
+ /* Grab the bits from PHYIR1, and put them in the upper half */
phy_reg = mdiobus_read(bus, addr, MII_PHYSID1);
if (phy_reg < 0)
}
/**
- * get_phy_device - reads the specified PHY device and returns its @phy_device struct
+ * get_phy_device - reads the specified PHY device and returns its @phy_device
+ * struct
* @bus: the target MII bus
* @addr: PHY address on the MII bus
* @is_c45: If true the PHY uses the 802.3 clause 45 protocol
{
int err;
- /* Don't register a phy if one is already registered at this
- * address */
+ /* Don't register a phy if one is already registered at this address */
if (phydev->bus->phy_map[phydev->addr])
return -EINVAL;
phydev->bus->phy_map[phydev->addr] = phydev;
* this function.
*/
static void phy_prepare_link(struct phy_device *phydev,
- void (*handler)(struct net_device *))
+ void (*handler)(struct net_device *))
{
phydev->adjust_link = handler;
}
* the desired functionality.
*/
struct phy_device *phy_connect(struct net_device *dev, const char *bus_id,
- void (*handler)(struct net_device *),
- phy_interface_t interface)
+ void (*handler)(struct net_device *),
+ phy_interface_t interface)
{
struct phy_device *phydev;
struct device *d;
int rc;
/* Search the list of PHY devices on the mdio bus for the
- * PHY with the requested name */
+ * PHY with the requested name
+ */
d = bus_find_device_by_name(&mdio_bus_type, NULL, bus_id);
if (!d) {
pr_err("PHY %s not found\n", bus_id);
EXPORT_SYMBOL(phy_connect);
/**
- * phy_disconnect - disable interrupts, stop state machine, and detach a PHY device
+ * phy_disconnect - disable interrupts, stop state machine, and detach a PHY
+ * device
* @phydev: target phy_device struct
*/
void phy_disconnect(struct phy_device *phydev)
if (ret & BMCR_RESET)
return -ETIMEDOUT;
- /*
- * Some chips (smsc911x) may still need up to another 1ms after the
+ /* Some chips (smsc911x) may still need up to another 1ms after the
* BMCR_RESET bit is cleared before they are usable.
*/
msleep(1);
int err;
/* Assume that if there is no driver, that it doesn't
- * exist, and we should use the genphy driver. */
+ * exist, and we should use the genphy driver.
+ */
if (NULL == d->driver) {
if (phydev->is_c45) {
pr_err("No driver for phy %x\n", phydev->phy_id);
/* Do initial configuration here, now that
* we have certain key parameters
- * (dev_flags and interface) */
+ * (dev_flags and interface)
+ */
err = phy_init_hw(phydev);
if (err)
phy_detach(phydev);
* Description: Same as phy_attach_direct() except that a PHY bus_id
* string is passed instead of a pointer to a struct phy_device.
*/
-struct phy_device *phy_attach(struct net_device *dev,
- const char *bus_id, phy_interface_t interface)
+struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
+ phy_interface_t interface)
{
struct bus_type *bus = &mdio_bus_type;
struct phy_device *phydev;
int rc;
/* Search the list of PHY devices on the mdio bus for the
- * PHY with the requested name */
+ * PHY with the requested name
+ */
d = bus_find_device_by_name(bus, NULL, bus_id);
if (!d) {
pr_err("PHY %s not found\n", bus_id);
/* If the device had no specific driver before (i.e. - it
* was using the generic driver), we unbind the device
* from the generic driver so that there's a chance a
- * real driver could be loaded */
+ * real driver could be loaded
+ */
if (phydev->dev.driver == &genphy_driver.driver)
device_release_driver(&phydev->dev);
}
int oldadv, adv;
int err, changed = 0;
- /* Only allow advertising what
- * this PHY supports */
+ /* Only allow advertising what this PHY supports */
phydev->advertising &= phydev->supported;
advertise = phydev->advertising;
/* Setup standard advertisement */
- oldadv = adv = phy_read(phydev, MII_ADVERTISE);
+ adv = phy_read(phydev, MII_ADVERTISE);
if (adv < 0)
return adv;
+ oldadv = adv;
adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
ADVERTISE_PAUSE_ASYM);
adv |= ethtool_adv_to_mii_adv_t(advertise);
/* Configure gigabit if it's supported */
if (phydev->supported & (SUPPORTED_1000baseT_Half |
- SUPPORTED_1000baseT_Full)) {
- oldadv = adv = phy_read(phydev, MII_CTRL1000);
+ SUPPORTED_1000baseT_Full)) {
+ adv = phy_read(phydev, MII_CTRL1000);
if (adv < 0)
return adv;
+ oldadv = adv;
adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
adv |= ethtool_adv_to_mii_ctrl1000_t(advertise);
int err;
int ctl = 0;
- phydev->pause = phydev->asym_pause = 0;
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
if (SPEED_1000 == phydev->speed)
ctl |= BMCR_SPEED1000;
if (ctl < 0)
return ctl;
- ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
+ ctl |= BMCR_ANENABLE | BMCR_ANRESTART;
/* Don't isolate the PHY if we're negotiating */
- ctl &= ~(BMCR_ISOLATE);
+ ctl &= ~BMCR_ISOLATE;
ctl = phy_write(phydev, MII_BMCR, ctl);
if (result == 0) {
/* Advertisement hasn't changed, but maybe aneg was never on to
- * begin with? Or maybe phy was isolated? */
+ * begin with? Or maybe phy was isolated?
+ */
int ctl = phy_read(phydev, MII_BMCR);
if (ctl < 0)
}
/* Only restart aneg if we are advertising something different
- * than we were before. */
+ * than we were before.
+ */
if (result > 0)
result = genphy_restart_aneg(phydev);
int lpa;
int lpagb = 0;
- /* Update the link, but return if there
- * was an error */
+ /* Update the link, but return if there was an error */
err = genphy_update_link(phydev);
if (err)
return err;
phydev->speed = SPEED_10;
phydev->duplex = DUPLEX_HALF;
- phydev->pause = phydev->asym_pause = 0;
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
if (lpagb & (LPA_1000FULL | LPA_1000HALF)) {
phydev->speed = SPEED_1000;
}
} else {
int bmcr = phy_read(phydev, MII_BMCR);
+
if (bmcr < 0)
return bmcr;
else
phydev->speed = SPEED_10;
- phydev->pause = phydev->asym_pause = 0;
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
}
return 0;
u32 features;
/* For now, I'll claim that the generic driver supports
- * all possible port types */
+ * all possible port types
+ */
features = (SUPPORTED_TP | SUPPORTED_MII
| SUPPORTED_AUI | SUPPORTED_FIBRE |
SUPPORTED_BNC);
mutex_lock(&phydev->lock);
value = phy_read(phydev, MII_BMCR);
- phy_write(phydev, MII_BMCR, (value | BMCR_PDOWN));
+ phy_write(phydev, MII_BMCR, value | BMCR_PDOWN);
mutex_unlock(&phydev->lock);
mutex_lock(&phydev->lock);
value = phy_read(phydev, MII_BMCR);
- phy_write(phydev, MII_BMCR, (value & ~BMCR_PDOWN));
+ phy_write(phydev, MII_BMCR, value & ~BMCR_PDOWN);
mutex_unlock(&phydev->lock);
* but the interrupt is still a valid one
*/
if (!(phydrv->flags & PHY_HAS_INTERRUPT) &&
- phy_interrupt_is_valid(phydev))
+ phy_interrupt_is_valid(phydev))
phydev->irq = PHY_POLL;
if (phydrv->flags & PHY_IS_INTERNAL)
/* Start out supporting everything. Eventually,
* a controller will attach, and may modify one
- * or both of these values */
+ * or both of these values
+ */
phydev->supported = phydrv->features;
phydev->advertising = phydrv->features;
mutex_unlock(&phydev->lock);
return err;
-
}
static int phy_remove(struct device *dev)
void phy_drivers_unregister(struct phy_driver *drv, int n)
{
int i;
- for (i = 0; i < n; i++) {
+
+ for (i = 0; i < n; i++)
phy_driver_unregister(drv + i);
- }
}
EXPORT_SYMBOL(phy_drivers_unregister);
projects / platform / adaptation / renesas_rcar / renesas_kernel.git / commitdiff