-/*
- * SuperH Ethernet device driver
+/* SuperH Ethernet device driver
*
* Copyright (C) 2006-2012 Nobuhiro Iwamatsu
* Copyright (C) 2008-2013 Renesas Solutions Corp.
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
* The full GNU General Public License is included in this distribution in
* the file called "COPYING".
.eesipr_value = DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff,
.tx_check = EESR_TC1 | EESR_FTC,
- .eesr_err_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT | \
- EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE | \
+ .eesr_err_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT |
+ EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE |
EESR_ECI,
.apr = 1,
cd->ecsipr_value = DEFAULT_ECSIPR_INIT;
if (!cd->fcftr_value)
- cd->fcftr_value = DEFAULT_FIFO_F_D_RFF | \
+ cd->fcftr_value = DEFAULT_FIFO_F_D_RFF |
DEFAULT_FIFO_F_D_RFD;
if (!cd->fdr_value)
return x;
}
-/*
- * Program the hardware MAC address from dev->dev_addr.
- */
+/* Program the hardware MAC address from dev->dev_addr. */
static void update_mac_address(struct net_device *ndev)
{
sh_eth_write(ndev,
- (ndev->dev_addr[0] << 24) | (ndev->dev_addr[1] << 16) |
- (ndev->dev_addr[2] << 8) | (ndev->dev_addr[3]), MAHR);
+ (ndev->dev_addr[0] << 24) | (ndev->dev_addr[1] << 16) |
+ (ndev->dev_addr[2] << 8) | (ndev->dev_addr[3]), MAHR);
sh_eth_write(ndev,
- (ndev->dev_addr[4] << 8) | (ndev->dev_addr[5]), MALR);
+ (ndev->dev_addr[4] << 8) | (ndev->dev_addr[5]), MALR);
}
-/*
- * Get MAC address from SuperH MAC address register
+/* Get MAC address from SuperH MAC address register
*
* SuperH's Ethernet device doesn't have 'ROM' to MAC address.
* This driver get MAC address that use by bootloader(U-boot or sh-ipl+g).
int rx_ringsize = sizeof(*rxdesc) * mdp->num_rx_ring;
int tx_ringsize = sizeof(*txdesc) * mdp->num_tx_ring;
- mdp->cur_rx = mdp->cur_tx = 0;
- mdp->dirty_rx = mdp->dirty_tx = 0;
+ mdp->cur_rx = 0;
+ mdp->cur_tx = 0;
+ mdp->dirty_rx = 0;
+ mdp->dirty_tx = 0;
memset(mdp->rx_ring, 0, rx_ringsize);
if (skb == NULL)
break;
dma_map_single(&ndev->dev, skb->data, mdp->rx_buf_sz,
- DMA_FROM_DEVICE);
+ DMA_FROM_DEVICE);
sh_eth_set_receive_align(skb);
/* RX descriptor */
struct sh_eth_private *mdp = netdev_priv(ndev);
int rx_ringsize, tx_ringsize, ret = 0;
- /*
- * +26 gets the maximum ethernet encapsulation, +7 & ~7 because the
+ /* +26 gets the maximum ethernet encapsulation, +7 & ~7 because the
* card needs room to do 8 byte alignment, +2 so we can reserve
* the first 2 bytes, and +16 gets room for the status word from the
* card.
{
struct sh_eth_private *mdp = netdev_priv(ndev);
struct sh_eth_txdesc *txdesc;
- int freeNum = 0;
+ int free_num = 0;
int entry = 0;
for (; mdp->cur_tx - mdp->dirty_tx > 0; mdp->dirty_tx++) {
txdesc->buffer_length, DMA_TO_DEVICE);
dev_kfree_skb_irq(mdp->tx_skbuff[entry]);
mdp->tx_skbuff[entry] = NULL;
- freeNum++;
+ free_num++;
}
txdesc->status = cpu_to_edmac(mdp, TD_TFP);
if (entry >= mdp->num_tx_ring - 1)
ndev->stats.tx_packets++;
ndev->stats.tx_bytes += txdesc->buffer_length;
}
- return freeNum;
+ return free_num;
}
/* Packet receive function */
if (!(desc_status & RDFEND))
ndev->stats.rx_length_errors++;
- /*
- * In case of almost all GETHER/ETHERs, the Receive Frame State
+ /* In case of almost all GETHER/ETHERs, the Receive Frame State
* (RFS) bits in the Receive Descriptor 0 are from bit 9 to
* bit 0. However, in case of the R8A7740's GETHER, the RFS
* bits are from bit 25 to bit 16. So, the driver needs right
if (skb == NULL)
break; /* Better luck next round. */
dma_map_single(&ndev->dev, skb->data, mdp->rx_buf_sz,
- DMA_FROM_DEVICE);
+ DMA_FROM_DEVICE);
sh_eth_set_receive_align(skb);
skb_checksum_none_assert(skb);
/* If we don't need to check status, don't. -KDU */
if (!(sh_eth_read(ndev, EDRRR) & EDRRR_R)) {
/* fix the values for the next receiving if RDE is set */
- if (intr_status & EESR_RDE)
- mdp->cur_rx = mdp->dirty_rx =
- (sh_eth_read(ndev, RDFAR) -
- sh_eth_read(ndev, RDLAR)) >> 4;
+ if (intr_status & EESR_RDE) {
+ u32 count = (sh_eth_read(ndev, RDFAR) -
+ sh_eth_read(ndev, RDLAR)) >> 4;
+
+ mdp->cur_rx = count;
+ mdp->dirty_rx = count;
+ }
sh_eth_write(ndev, EDRRR_R, EDRRR);
}
if (mdp->ether_link_active_low)
link_stat = ~link_stat;
}
- if (!(link_stat & PHY_ST_LINK))
+ if (!(link_stat & PHY_ST_LINK)) {
sh_eth_rcv_snd_disable(ndev);
- else {
+ } else {
/* Link Up */
sh_eth_write(ndev, sh_eth_read(ndev, EESIPR) &
- ~DMAC_M_ECI, EESIPR);
- /*clear int */
+ ~DMAC_M_ECI, EESIPR);
+ /* clear int */
sh_eth_write(ndev, sh_eth_read(ndev, ECSR),
- ECSR);
+ ECSR);
sh_eth_write(ndev, sh_eth_read(ndev, EESIPR) |
- DMAC_M_ECI, EESIPR);
+ DMAC_M_ECI, EESIPR);
/* enable tx and rx */
sh_eth_rcv_snd_enable(ndev);
}
u32 edtrr = sh_eth_read(ndev, EDTRR);
/* dmesg */
dev_err(&ndev->dev, "TX error. status=%8.8x cur_tx=%8.8x ",
- intr_status, mdp->cur_tx);
+ intr_status, mdp->cur_tx);
dev_err(&ndev->dev, "dirty_tx=%8.8x state=%8.8x EDTRR=%8.8x.\n",
- mdp->dirty_tx, (u32) ndev->state, edtrr);
+ mdp->dirty_tx, (u32) ndev->state, edtrr);
/* dirty buffer free */
sh_eth_txfree(ndev);
}
if (!mdp->link) {
sh_eth_write(ndev,
- (sh_eth_read(ndev, ECMR) & ~ECMR_TXF), ECMR);
+ sh_eth_read(ndev, ECMR) & ~ECMR_TXF,
+ ECMR);
new_state = 1;
mdp->link = phydev->link;
if (mdp->cd->no_psr || mdp->no_ether_link)
struct phy_device *phydev = NULL;
snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
- mdp->mii_bus->id , mdp->phy_id);
+ mdp->mii_bus->id, mdp->phy_id);
mdp->link = 0;
mdp->speed = 0;
}
static int sh_eth_get_settings(struct net_device *ndev,
- struct ethtool_cmd *ecmd)
+ struct ethtool_cmd *ecmd)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
unsigned long flags;
}
static int sh_eth_set_settings(struct net_device *ndev,
- struct ethtool_cmd *ecmd)
+ struct ethtool_cmd *ecmd)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
unsigned long flags;
}
static void sh_eth_get_ethtool_stats(struct net_device *ndev,
- struct ethtool_stats *stats, u64 *data)
+ struct ethtool_stats *stats, u64 *data)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
int i = 0;
switch (stringset) {
case ETH_SS_STATS:
memcpy(data, *sh_eth_gstrings_stats,
- sizeof(sh_eth_gstrings_stats));
+ sizeof(sh_eth_gstrings_stats));
break;
}
}
netif_stop_queue(ndev);
- if (netif_msg_timer(mdp))
- dev_err(&ndev->dev, "%s: transmit timed out, status %8.8x,"
- " resetting...\n", ndev->name, (int)sh_eth_read(ndev, EESR));
+ if (netif_msg_timer(mdp)) {
+ dev_err(&ndev->dev, "%s: transmit timed out, status %8.8x, resetting...\n",
+ ndev->name, (int)sh_eth_read(ndev, EESR));
+ }
/* tx_errors count up */
ndev->stats.tx_errors++;
}
/* ioctl to device function */
-static int sh_eth_do_ioctl(struct net_device *ndev, struct ifreq *rq,
- int cmd)
+static int sh_eth_do_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
struct phy_device *phydev = mdp->phydev;
unsigned long flags;
spin_lock_irqsave(&mdp->lock, flags);
- /*
- * Initial condition is MCT = 1, PRM = 0.
+ /* Initial condition is MCT = 1, PRM = 0.
* Depending on ndev->flags, set PRM or clear MCT
*/
ecmr_bits = (sh_eth_read(ndev, ECMR) & ~ECMR_PRM) | ECMR_MCT;
mdp->vlan_num_ids++;
- /*
- * The controller has one VLAN tag HW filter. So, if the filter is
+ /* The controller has one VLAN tag HW filter. So, if the filter is
* already enabled, the driver disables it and the filte
*/
if (mdp->vlan_num_ids > 1) {
mdp->mii_bus->name = "sh_mii";
mdp->mii_bus->parent = &ndev->dev;
snprintf(mdp->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
- mdp->pdev->name, id);
+ mdp->pdev->name, id);
/* PHY IRQ */
mdp->mii_bus->irq = devm_kzalloc(&ndev->dev,
/* print device information */
pr_info("Base address at 0x%x, %pM, IRQ %d.\n",
- (u32)ndev->base_addr, ndev->dev_addr, ndev->irq);
+ (u32)ndev->base_addr, ndev->dev_addr, ndev->irq);
platform_set_drvdata(pdev, ndev);
#ifdef CONFIG_PM
static int sh_eth_runtime_nop(struct device *dev)
{
- /*
- * Runtime PM callback shared between ->runtime_suspend()
+ /* Runtime PM callback shared between ->runtime_suspend()
* and ->runtime_resume(). Simply returns success.
*
* This driver re-initializes all registers after
-/*
- * SuperH Ethernet device driver
+/* SuperH Ethernet device driver
*
* Copyright (C) 2006-2012 Nobuhiro Iwamatsu
* Copyright (C) 2008-2012 Renesas Solutions Corp.
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
* The full GNU General Public License is included in this distribution in
* the file called "COPYING".
#define SH2_SH3_SKB_RX_ALIGN 2
#endif
-/*
- * Register's bits
+/* Register's bits
*/
/* EDSR : sh7734, sh7757, sh7763, and r8a7740 only */
enum EDSR_BIT {
EDTRR_TRNS_ETHER = 0x01,
};
-/* EDRRR*/
+/* EDRRR */
enum EDRRR_R_BIT {
EDRRR_R = 0x01,
};
#define TSU_VTAG_ENABLE 0x80000000
#define TSU_VTAG_VID_MASK 0x00000fff
-/*
- * The sh ether Tx buffer descriptors.
+/* The sh ether Tx buffer descriptors.
* This structure should be 20 bytes.
*/
struct sh_eth_txdesc {
#endif
u32 addr; /* TD2 */
u32 pad1; /* padding data */
-} __attribute__((aligned(2), packed));
+} __aligned(2) __packed;
-/*
- * The sh ether Rx buffer descriptors.
+/* The sh ether Rx buffer descriptors.
* This structure should be 20 bytes.
*/
struct sh_eth_rxdesc {
#endif
u32 addr; /* RD2 */
u32 pad0; /* padding data */
-} __attribute__((aligned(2), packed));
+} __aligned(2) __packed;
/* This structure is used by each CPU dependency handling. */
struct sh_eth_cpu_data {
unsigned long eesr_err_check;
/* hardware features */
- unsigned long irq_flags; /* IRQ configuration flags */
- unsigned no_psr:1; /* EtherC DO NOT have PSR */
- unsigned apr:1; /* EtherC have APR */
- unsigned mpr:1; /* EtherC have MPR */
- unsigned tpauser:1; /* EtherC have TPAUSER */
- unsigned bculr:1; /* EtherC have BCULR */
- unsigned tsu:1; /* EtherC have TSU */
- unsigned hw_swap:1; /* E-DMAC have DE bit in EDMR */
- unsigned rpadir:1; /* E-DMAC have RPADIR */
- unsigned no_trimd:1; /* E-DMAC DO NOT have TRIMD */
+ unsigned long irq_flags; /* IRQ configuration flags */
+ unsigned no_psr:1; /* EtherC DO NOT have PSR */
+ unsigned apr:1; /* EtherC have APR */
+ unsigned mpr:1; /* EtherC have MPR */
+ unsigned tpauser:1; /* EtherC have TPAUSER */
+ unsigned bculr:1; /* EtherC have BCULR */
+ unsigned tsu:1; /* EtherC have TSU */
+ unsigned hw_swap:1; /* E-DMAC have DE bit in EDMR */
+ unsigned rpadir:1; /* E-DMAC have RPADIR */
+ unsigned no_trimd:1; /* E-DMAC DO NOT have TRIMD */
unsigned no_ade:1; /* E-DMAC DO NOT have ADE bit in EESR */
unsigned hw_crc:1; /* E-DMAC have CSMR */
unsigned select_mii:1; /* EtherC have RMII_MII (MII select register) */
struct sh_eth_txdesc *tx_ring;
struct sk_buff **rx_skbuff;
struct sk_buff **tx_skbuff;
- spinlock_t lock;
- u32 cur_rx, dirty_rx; /* Producer/consumer ring indices */
+ spinlock_t lock; /* Register access lock */
+ u32 cur_rx, dirty_rx; /* Producer/consumer ring indices */
u32 cur_tx, dirty_tx;
- u32 rx_buf_sz; /* Based on MTU+slack. */
+ u32 rx_buf_sz; /* Based on MTU+slack. */
int edmac_endian;
struct napi_struct napi;
/* MII transceiver section. */
- u32 phy_id; /* PHY ID */
+ u32 phy_id; /* PHY ID */
struct mii_bus *mii_bus; /* MDIO bus control */
struct phy_device *phydev; /* PHY device control */
int link;
int msg_enable;
int speed;
int duplex;
- int port; /* for TSU */
- int vlan_num_ids; /* for VLAN tag filter */
+ int port; /* for TSU */
+ int vlan_num_ids; /* for VLAN tag filter */
unsigned no_ether_link:1;
unsigned ether_link_active_low:1;
projects / platform / adaptation / renesas_rcar / renesas_kernel.git / commitdiff