+++ /dev/null
-/*
- * Name: bcmtool_4330b1.c
- *
- * Description: Download a patchram files for the HCD format
- *
- * Copyright (c) 2012-2013, Broadcom Corp., All Rights Reserved.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- */
-
-#include <stdio.h>
-#include <errno.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <stdlib.h>
-#include <time.h>
-#include <string.h>
-#include <signal.h>
-#include <unistd.h>
-#include <sys/termios.h>
-#include <sys/ioctl.h>
-#include <limits.h>
-
-#define N_HCI 15
-#define HCI_UART_H4 0
-#define HCI_UART_BCSP 1
-#define HCI_UART_3WIRE 2
-#define HCI_UART_H4DS 3
-#define HCI_UART_LL 4
-#define HCIUARTSETPROTO _IOW('U', 200, int)
-#define HCIUARTGETPROTO _IOR('U', 201, int)
-#define HCIUARTGETDEVICE _IOR('U', 202, int)
-
-/* Pre baudrate change for fast download */
-#define HIGH_SPEED_PATCHRAM_DOWNLOAD TRUE
-
-/* Host Stack Idle Threshold */
-#define HCILP_IDLE_THRESHOLD 0x01
-
-/* Host Controller Idle Threshold */
-#define HCILP_HC_IDLE_THRESHOLD 0x01
-
-/* BT_WAKE Polarity - 0=Active Low, 1= Active High */
-#define HCILP_BT_WAKE_POLARITY 1
-
-/* HOST_WAKE Polarity - 0=Active Low, 1= Active High */
-#define HCILP_HOST_WAKE_POLARITY 1
-
-/* Local Feature */
-#define BCM_DISABLE_RF_PWRCTRL FALSE
-
-#define RELEASE_DATE "2011.02.07"
-#define DEBUG 1
-
-/* Broadcom AXI patch for BCM4335 chipset only */
-#define DEPLOY_4335A_AXI_BRIDGE_PATCH TRUE
-
-/* The fix for AXI bridge contention between BT and WLAN:
- *
- * Set this TRUE only when
- * 1. the platform is using BCM4335A or BCM4335B0, and
- * 2. Kernel source has implemented AXI BRIDGE lock logic.
- */
-#ifndef DEPLOY_4335A_AXI_BRIDGE_PATCH
-#define DEPLOY_4335A_AXI_BRIDGE_PATCH FALSE
-#endif
-
-typedef unsigned char UINT8;
-typedef unsigned short UINT16;
-typedef unsigned long UINT32;
-typedef signed long INT32;
-typedef signed char INT8;
-typedef signed short INT16;
-typedef unsigned char BOOLEAN;
-
-#define FALSE 0
-#define TRUE (!FALSE)
-
-#define BD_ADDR_LEN 6 /* Device address length */
-typedef UINT8 BD_ADDR[BD_ADDR_LEN]; /* Device address */
-
-#define HCI_GRP_LINK_CONTROL_CMDS (0x01 << 10)
-#define HCI_GRP_LINK_POLICY_CMDS (0x02 << 10)
-#define HCI_GRP_HOST_CONT_BASEBAND_CMDS (0x03 << 10)
-#define HCI_GRP_INFORMATIONAL_PARAMS (0x04 << 10)
-#define HCI_GRP_STATUS_PARAMS (0x05 << 10)
-#define HCI_GRP_TESTING_CMDS (0x06 << 10)
-#define HCI_GRP_L2CAP_CMDS (0x07 << 10)
-#define HCI_GRP_L2CAP_HCI_EVTS (0x08 << 10)
-#define HCI_GRP_VENDOR_SPECIFIC (0x3F << 10)
-
-#define HCI_RESET (0x0003 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
-#define HCI_SET_EVENT_FILTER (0x0005 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
-#define HCI_READ_LOCAL_NAME (0x0014 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
-#define HCI_READ_SCAN_ENABLE (0x0019 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
-#define HCI_WRITE_SCAN_ENABLE (0x001A | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
-
-#define HCI_READ_LOCAL_VERSION_INFO (0x0001 | HCI_GRP_INFORMATIONAL_PARAMS)
-#define HCI_READ_LOCAL_FEATURES (0x0003 | HCI_GRP_INFORMATIONAL_PARAMS)
-
-#define HCI_ENABLE_DEV_UNDER_TEST_MODE (0x0003 | HCI_GRP_TESTING_CMDS)
-
-#define HCI_BRCM_SUPER_PEEK_POKE (0x000A | HCI_GRP_VENDOR_SPECIFIC)
-#define VSC_WRITE_BD_ADDR (0x0001 | HCI_GRP_VENDOR_SPECIFIC)
-#define VSC_HCI_CMD_SET_LOC_FEATURES_CMD (0x000B | HCI_GRP_VENDOR_SPECIFIC)
-#define HCI_BRCM_UPDATE_BAUDRATE_CMD (0x0018 | HCI_GRP_VENDOR_SPECIFIC)
-#define HCI_BRCM_WRITE_SCO_PCM_INT_PARAM (0x001C | HCI_GRP_VENDOR_SPECIFIC)
-#define VSC_WRITE_PCM_DATA_FORMAT_PARAM (0x001E | HCI_GRP_VENDOR_SPECIFIC)
-#define HCI_BRCM_WRITE_SLEEP_MODE (0x0027 | HCI_GRP_VENDOR_SPECIFIC)
-#define HCI_BRCM_DOWNLOAD_MINI_DRV (0x002E | HCI_GRP_VENDOR_SPECIFIC)
-#define VSC_WRITE_UART_CLOCK_SETTING (0x0045 | HCI_GRP_VENDOR_SPECIFIC)
-#define HCI_VSC_WRITE_RAM (0x004C | HCI_GRP_VENDOR_SPECIFIC)
-#define HCI_VSC_LAUNCH_RAM (0x004E | HCI_GRP_VENDOR_SPECIFIC)
-
-#define VOICE_SETTING_MU_LAW_MD 0x0100
-#define VOICE_SETTING_LINEAR_MD 0x0060
-
-#define HCI_ARM_MEM_PEEK 0x04
-#define HCI_ARM_MEM_POKE 0x05
-
-#define BTUI_MAX_STRING_LENGTH_PER_LINE 255
-#define HCI_BRCM_WRITE_SLEEP_MODE_LENGTH 10
-
-#define HCI_BRCM_UPDATE_BAUD_RATE_ENCODED_LENGTH 0x02
-#define HCI_BRCM_UPDATE_BAUD_RATE_UNENCODED_LENGTH 0x06
-
-#define VSC_WRITE_UART_CLOCK_SETTING_LEN 1
-
-/* print string with time stamp */
-#define TDEBUG0(m) if(debug_mode) {print_time();fprintf(stderr,m);}
-#define TDEBUG1(m,n1) if(debug_mode) {print_time();fprintf(stderr,m,n1);}
-#define TDEBUG2(m,n1,n2) if(debug_mode) {print_time();fprintf(stderr,m,n1,n2);}
-#define TDEBUG3(m,n1,n2,n3) if(debug_mode) {print_time();fprintf(stderr,m,n1,n2,n3);}
-#define TDEBUG4(m,n1,n2,n3,n4) if(debug_mode) {print_time();fprintf(stderr,m,n1,n2,n3,n4);}
-#define TDEBUG5(m,n1,n2,n3,n4,n5) if(debug_mode) {print_time();fprintf(stderr,m,n1,n2,n3,n4,n5);}
-#define TDEBUG6(m,n1,n2,n3,n4,n5,n6) if(debug_mode) {print_time();fprintf(stderr,m,n1,n2,n3,n4,n5,n6);}
-
-/* print just string */
-#define DEBUG0(m) if(debug_mode) {fprintf(stderr,m);}
-#define DEBUG1(m,n1) if(debug_mode) {fprintf(stderr,m,n1);}
-#define DEBUG2(m,n1,n2) if(debug_mode) {fprintf(stderr,m,n1,n2);}
-#define DEBUG3(m,n1,n2,n3) if(debug_mode) {fprintf(stderr,m,n1,n2,n3);}
-#define DEBUG4(m,n1,n2,n3,n4) if(debug_mode) {fprintf(stderr,m,n1,n2,n3,n4);}
-#define DEBUG5(m,n1,n2,n3,n4,n5) if(debug_mode) {fprintf(stderr,m,n1,n2,n3,n4,n5);}
-#define DEBUG6(m,n1,n2,n3,n4,n5,n6) if(debug_mode) {fprintf(stderr,m,n1,n2,n3,n4,n5,n6);}
-
-#define STREAM_TO_UINT8(u8, p) {u8 = (UINT8)(*(p)); (p) += 1;}
-#define STREAM_TO_UINT16(u16, p) {u16 = ((UINT16)(*(p)) + (((UINT16)(*((p) + 1))) << 8)); (p) += 2;}
-#define STREAM_TO_UINT32(u32, p) {u32 = (((UINT32)(*(p))) + ((((UINT32)(*((p) + 1)))) << 8) + ((((UINT32)(*((p) + 2)))) << 16) + ((((UINT32)(*((p) + 3)))) << 24)); (p) += 4;}
-
-#define ROTATE_BD_ADDR(p1, p2) \
- do \
- { \
- p1[0] = p2[5]; \
- p1[1] = p2[4]; \
- p1[2] = p2[3]; \
- p1[3] = p2[2]; \
- p1[4] = p2[1]; \
- p1[5] = p2[0]; \
- } while (0)
-
-UINT8 vsc_for_pcm_config[5] = { 0x00, 0x00, 0x03, 0x03, 0x00 };
-
-/*
- Byte1 -- 0 for MSb first
- Byte2 -- 0 Fill value
- Byte3 -- 1 Fill option (0:0's, 1:1's , 2:Signed, 3:Programmable)
- Byte4 -- 1 Number of fill bits
- Byte5 -- 1 Right justified (0 for left justified)
-*/
-
-UINT8 vsc_for_sco_pcm[5] = { 0x00, 0x01, 0x00, 0x01, 0x01 };
-
-/*
- Neverland : PCM, 256, short, master ,master
- Volance : PCM, 256, short, master ,master
-
- Byte1 -- 0 for PCM 1 for UART or USB
- Byte2 -- 0 : 128, 1: 256, 2:512, 3:1024, 4:2048 Khz
- Byte3 -- 0 for short frame sync 1 for long frame sync
- Byte4 -- 0 Clock direction 0 for same as sync 1 for opposite direction
- Byte5 -- 0 for slave 1 for master
-*/
-
-int fd; /* HCI handle */
-
-BOOLEAN debug_mode = FALSE; /* Debug Mode Enable */
-
-BOOLEAN use_two_stop_bits = FALSE; /* Flag of two stop bits for tty */
-
-unsigned char buffer[1024];
-
-struct termios termios;
-
-void ChangeBaudRate(UINT32 baudrate);
-
-void exit_err(UINT8 err)
-{
-#if ( HIGH_SPEED_PATCHRAM_DOWNLOAD == TRUE )
- ChangeBaudRate(115200);
-#endif
- exit(err);
-}
-
-void print_time(void)
-{
-#if 0
- struct timespec tp;
- int rs;
-
- rs = clock_gettime(CLOCK_REALTIME, &tp);
- fprintf(stderr, "[%04d : %06d]\n", tp.tv_sec, tp.tv_nsec / 1000);
- return;
-#endif
-}
-
-void dump(unsigned char *out, int len)
-{
- int i;
-
- for (i = 0; i < len; i++) {
- if (!(i % 16)) {
- DEBUG0("\n");
- }
- DEBUG1("%02x ", out[i]);
- }
- DEBUG0("\n\n");
-}
-
-UINT8 SendCommand(UINT16 opcode, UINT8 param_len, UINT8 * p_param_buf)
-{
- UINT8 pbuf[255] = { 0, };
- UINT8 i = 0;
-
- pbuf[0] = 0x1;
- pbuf[1] = (UINT8) (opcode);
- pbuf[2] = (UINT8) (opcode >> 8);
- pbuf[3] = param_len;
-
- for (i = 0; i < param_len; i++) {
- pbuf[i + 4] = *p_param_buf++;
- }
-
- DEBUG1("Send %d", param_len + 4);
-
- dump(pbuf, param_len + 4);
-
- write(fd, pbuf, param_len + 4);
- return 0;
-}
-
-void expired(int sig)
-{
- static UINT8 count = 0;
- DEBUG0("expired try again\n");
- SendCommand(HCI_RESET, 0, NULL);
- alarm(1);
- count++;
-
- if (count > 3) {
- fprintf(stderr, "[ERR] HCI reset time expired\n");
- exit(1);
- }
-}
-
-void read_event(int fd, unsigned char *buffer)
-{
- int i = 0;
- int len = 3;
- int count;
-
- while ((count = read(fd, &buffer[i], len)) < len) {
- i += count;
- len -= count;
- }
-
- i += count;
- len = buffer[2];
-
- while ((count = read(fd, &buffer[i], len)) < len) {
- i += count;
- len -= count;
- }
-
-#ifdef DEBUG
- count += i;
-
- DEBUG1("\nreceived %d", count);
- dump(buffer, count);
-#endif
-}
-
-INT32 filesize(char *name)
-{
- INT32 size;
- int flag;
- struct stat buf;
-
- flag = stat(name, &buf);
- if (flag == -1)
- return -1;
-
- size = buf.st_size;
- return (size);
-}
-
-void DisplayProgress(int total, int val)
-{
-#if 0
-#define PROGRESS_NUM 20
-
- int p;
- int i;
- char text[PROGRESS_NUM + 2] = { 0, };
-
- text[0] = '[';
- text[PROGRESS_NUM + 1] = ']';
- p = (val * PROGRESS_NUM) / total;
-
- for (i = 1; i <= p; i++) {
- text[i] = '=';
- }
-
- for (i = p + 1; i <= PROGRESS_NUM; i++) {
- text[i] = ' ';
- }
-
- for (i = 0; i <= (PROGRESS_NUM + 1); i++) {
- fprintf(stderr, "%c", text[i]);
- }
-
- if (p >= PROGRESS_NUM)
- fprintf(stderr, " %6d/%6d\n", val, total);
- else
- fprintf(stderr, " %6d/%6d\r", val, total);
-#else
- if (val == total)
- fprintf(stderr, " %6d/%6d\n", val, total);
- else
- fprintf(stderr, " %6d/%6d\r", val, total);
-#endif
-}
-
-#if (DEPLOY_4335A_AXI_BRIDGE_PATCH == TRUE)
-/* 4335A/B0 AXI BRIDEG lock cookie */
-struct btlock {
- int lock;
- int cookie;
-};
-
-#define AXI_LOCK_COOKIE ('B' | 'T'<<8 | '3'<<16 | '5'<<24) /* BT35 */
-#define AXI_LOCK_FS_NODE "/dev/btlock"
-
-static const UINT8 bcm4335a_axi_patch_addr[4] =
-{
- 0x00, 0x02, 0x0d, 0x00
-};
-
-static const UINT8 bcm4335a_axi_patch[] =
-{
- 0x00, 0x02, 0x0d, 0x00, /* bcm4335a_axi_patch_addr */
- 0x70, 0xb5, 0x0c, 0x49, 0x4c, 0xf6, 0x20, 0x30,
- 0x8a, 0xf7, 0xbb, 0xf9, 0x01, 0x28, 0x0d, 0xd1,
- 0x8a, 0xf7, 0x80, 0xf9, 0x08, 0xb1, 0x04, 0x25,
- 0x00, 0xe0, 0x05, 0x25, 0x00, 0x24, 0x03, 0xe0,
- 0x8a, 0xf7, 0x74, 0xf9, 0x64, 0x1c, 0xe4, 0xb2,
- 0xac, 0x42, 0xf9, 0xd3, 0xbd, 0xe8, 0x70, 0x40,
- 0x8a, 0xf7, 0x7f, 0xb9, 0xb0, 0x9b, 0x04, 0x00
-};
-
-/*******************************************************************************
-**
-** Function hw_4335_dl_axi_patch
-**
-** Description Download 4335Ax/4335B0 AXI BRIDGE patch
-**
-** Returns TRUE, if fw patch is sent
-** FALSE, otherwise
-**
-*******************************************************************************/
-static UINT8 hw_4335_dl_axi_patch(void)
-{
- SendCommand(HCI_VSC_WRITE_RAM, sizeof(bcm4335a_axi_patch),
- (UINT8 *) bcm4335a_axi_patch);
- read_event(fd, buffer);
-
- DEBUG0("hw_4335_dl_axi_patch downloading done");
-
- SendCommand(HCI_VSC_LAUNCH_RAM, sizeof(bcm4335a_axi_patch_addr),
- (UINT8 *) bcm4335a_axi_patch_addr);
- read_event(fd, buffer);
-
- DEBUG0("hw_4335_dl_axi_patch launching done");
-
- return TRUE;
-}
-
-/*******************************************************************************
-**
-** Function hw_4335_release_axi_bridge_lock
-**
-** Description Notify kernel to release the AXI BRIDGE lock which was
-** acquired earlier in rfkill driver when powering on BT
-** Controller
-**
-** Returns None
-**
-*******************************************************************************/
-void hw_4335_axi_bridge_lock(void)
-{
- int fd, ret;
- struct btlock lock;
-
- lock.cookie = AXI_LOCK_COOKIE;
- lock.lock = 1;
-
- fd = open(AXI_LOCK_FS_NODE, O_RDWR);
- if (fd >= 0)
- {
- ret = write(fd, &lock, sizeof(lock));
- DEBUG0("4335 AXI BRIDGE lock");
- close(fd);
- }
- else
- {
- DEBUG1("Failed to unlock AXI LOCK -- can't open %s", AXI_LOCK_FS_NODE);
- }
-}
-
-/*******************************************************************************
-**
-** Function hw_4335_release_axi_bridge_lock
-**
-** Description Notify kernel to release the AXI BRIDGE lock which was
-** acquired earlier in rfkill driver when powering on BT
-** Controller
-**
-** Returns None
-**
-*******************************************************************************/
-void hw_4335_release_axi_bridge_lock(void)
-{
- int fd, ret;
- struct btlock lock;
-
- lock.cookie = AXI_LOCK_COOKIE;
- lock.lock = 0;
-
- fd = open(AXI_LOCK_FS_NODE, O_RDWR);
- if (fd >= 0)
- {
- ret = write(fd, &lock, sizeof(lock));
- DEBUG0("Releasing 4335 AXI BRIDGE lock");
- close(fd);
- }
- else
- {
- DEBUG1("Failed to unlock AXI LOCK -- can't open %s", AXI_LOCK_FS_NODE);
- }
-}
-#endif /* (DEPLOY_4335A_AXI_BRIDGE_PATCH == TRUE) */
-
-UINT8 DownloadPatchram(char *patchram1)
-{
- UINT32 len;
- char prm[128] = { 0, };
- FILE *pFile = NULL;
-
- INT32 FileSize = 0;
- INT32 SentSize = 0;
-
- DEBUG1("\n%s\n", patchram1);
-
- /* HCI reset */
- DEBUG0("HCI reset\n");
- SendCommand(HCI_RESET, 0, NULL);
- alarm(1);
- read_event(fd, buffer);
- alarm(0);
-
-#if (DEPLOY_4335A_AXI_BRIDGE_PATCH == TRUE)
- char *p_tmp;
-
- SendCommand(HCI_READ_LOCAL_NAME, 0, NULL);
- read_event(fd, buffer);
-
- p_tmp = strstr((char *)(buffer + 7), "BCM4335");
- DEBUG1( "chip_name [%s]\n", p_tmp);
-
- if ((p_tmp != NULL) &&
- ((p_tmp[7] == 'A') /* 4335A */||
- ((p_tmp[7] == 'B') && (p_tmp[8] == '0')) /* 4335B0 */)) {
- hw_4335_dl_axi_patch();
- }
- hw_4335_release_axi_bridge_lock();
-#endif
-
-#if ( HIGH_SPEED_PATCHRAM_DOWNLOAD == TRUE )
- ChangeBaudRate(921600);
-#endif
-
- strncpy(prm, patchram1, 127);
-
- fprintf(stderr, "Download Start\n");
-
- if ((pFile = fopen(prm, "r")) == NULL) {
- fprintf(stderr, "file %s could not be opened, error %d\n", prm,
- errno);
- exit_err(1);
- }
- FileSize = filesize(prm);
-
- SendCommand(HCI_BRCM_DOWNLOAD_MINI_DRV, 0, NULL);
- read_event(fd, buffer);
-
- usleep(50000);
-
- while (fread(&buffer[1], sizeof(UINT8), 3, pFile)) {
- buffer[0] = 0x01;
-
- len = buffer[3];
-
- fread(&buffer[4], sizeof(UINT8), len, pFile);
-
- write(fd, buffer, len + 4);
-
- /* dispaly progress */
- SentSize += (len + 3);
-#if 0
- DisplayProgress(FileSize, SentSize);
-#endif
- /* dispaly progress */
-
- read_event(fd, buffer);
-
- }
- fclose(pFile);
-
- usleep(100000); /*100ms delay */
-
- tcflush(fd, TCIOFLUSH);
- tcgetattr(fd, &termios);
- cfmakeraw(&termios);
- termios.c_cflag |= CRTSCTS;
-
- if (use_two_stop_bits)
- termios.c_cflag |= CSTOPB;
-
- tcsetattr(fd, TCSANOW, &termios);
- tcflush(fd, TCIOFLUSH);
- tcsetattr(fd, TCSANOW, &termios);
- tcflush(fd, TCIOFLUSH);
- tcflush(fd, TCIOFLUSH);
- cfsetospeed(&termios, B115200);
- cfsetispeed(&termios, B115200);
- tcsetattr(fd, TCSANOW, &termios);
-
- /* Send HCI_RESET Command and process event */
- DEBUG0("HCI reset\n");
- SendCommand(HCI_RESET, 0, NULL);
- alarm(1);
- read_event(fd, buffer);
- alarm(0);
- fprintf(stderr, "Download Complete\n");
-
- return 0;
-}
-
-void SetScanEnable(void)
-{
- UINT8 scan_data[1];
-
- /* 0x00: No scan enabled */
- /* 0x01: Inquiry scan enabled | Page scan disabled */
- /* 0x02: Inquiry scan disabled | Page scan enabled */
- /* 0x03: Inquiry scan enabled | Page scan enabled */
-
- scan_data[0] = 0x03;
- SendCommand(HCI_WRITE_SCAN_ENABLE, 1, &scan_data[0]);
- read_event(fd, buffer);
-}
-
-void SetAudio(void)
-{
- fprintf(stderr, "Write Audio parameter\n");
-
- DEBUG5("vsc_for_sco_pcm = {%d,%d,%d,%d,%d}\n", vsc_for_sco_pcm[0],
- vsc_for_sco_pcm[1], vsc_for_sco_pcm[2],
- vsc_for_sco_pcm[3], vsc_for_sco_pcm[4]);
-
- SendCommand(HCI_BRCM_WRITE_SCO_PCM_INT_PARAM, 5,
- (UINT8 *) vsc_for_sco_pcm);
- read_event(fd, buffer);
-
- DEBUG5("vsc_for_pcm_config = {%d,%d,%d,%d,%d}\n", vsc_for_pcm_config[0],
- vsc_for_pcm_config[1], vsc_for_pcm_config[2],
- vsc_for_pcm_config[3], vsc_for_pcm_config[4]);
-
- SendCommand(VSC_WRITE_PCM_DATA_FORMAT_PARAM, 5,
- (UINT8 *) vsc_for_pcm_config);
- read_event(fd, buffer);
-}
-
-void SetPcmConf(UINT8 p0, UINT8 p1, UINT8 p2, UINT8 p3, UINT8 p4)
-{
- vsc_for_pcm_config[0] = p0;
- vsc_for_pcm_config[1] = p1;
- vsc_for_pcm_config[2] = p2;
- vsc_for_pcm_config[3] = p3;
- vsc_for_pcm_config[4] = p4;
-}
-
-void SetScoConf(UINT8 p0, UINT8 p1, UINT8 p2, UINT8 p3, UINT8 p4)
-{
- vsc_for_sco_pcm[0] = p0;
- vsc_for_sco_pcm[1] = p1;
- vsc_for_sco_pcm[2] = p2;
- vsc_for_sco_pcm[3] = p3;
- vsc_for_sco_pcm[4] = p4;
-}
-
-void HCILP_Enable(BOOLEAN on)
-{
- fprintf(stderr, "Set Low Power mode %d\n", on);
- UINT8 data[HCI_BRCM_WRITE_SLEEP_MODE_LENGTH] = {
- 0x01, /* Sleep Mode algorithm 1 */
- HCILP_IDLE_THRESHOLD, /* Host Idle Treshold in 300ms */
- HCILP_HC_IDLE_THRESHOLD, /* Host Controller Idle Treshold in 300ms *//* this should be less than scan interval. */
- HCILP_BT_WAKE_POLARITY, /* BT_WAKE Polarity - 0=Active Low, 1= Active High */
- HCILP_HOST_WAKE_POLARITY, /* HOST_WAKE Polarity - 0=Active Low, 1= Active High */
- 0x01, /* Allow host Sleep during SCO */
- 0x01, /* Combine Sleep Mode and LPM - The device will not sleep in mode 0 if this flag is set to 1, */
- 0x00, /* UART_TXD Tri-State : 0x00 = Do not tri-state UART_TXD in sleep mode */
- 0x00, /* NA to Mode 1 */
- 0x00, /* NA to Mode 1 */
- };
-
- if (on) {
- data[0] = 0x01;
- } else {
- data[0] = 0x00;
- }
-
- SendCommand(HCI_BRCM_WRITE_SLEEP_MODE, HCI_BRCM_WRITE_SLEEP_MODE_LENGTH,
- (UINT8 *) data);
- read_event(fd, buffer);
-}
-
-UINT32 uart_speed(UINT32 Speed)
-{
- switch (Speed) {
- case 115200:
- return B115200;
- case 230400:
- return B230400;
- case 460800:
- return B460800;
- case 921600:
- return B921600;
- case 1000000:
- return B1000000;
- case 1500000:
- return B1500000;
- case 2000000:
- return B2000000;
- case 2500000:
- return B2500000;
- case 3000000:
- return B3000000;
- case 4000000:
- return B4000000;
- default:
- return B115200;
- }
-}
-
-void ChangeBaudRate(UINT32 baudrate)
-{
- UINT8 hci_data[HCI_BRCM_UPDATE_BAUD_RATE_UNENCODED_LENGTH] =
- { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
- UINT8 uart_clock_24 = 0x2; /* 0x1 - UART Clock 48MHz, 0x2 - UART Clock 24MHz */
- UINT8 uart_clock_48 = 0x1; /* 0x1 - UART Clock 48MHz, 0x2 - UART Clock 24MHz */
-
- switch (baudrate) {
- case 115200:
- case 230400:
- case 460800:
- case 921600:
- case 1000000:
- case 1500000:
- case 2000000:
- case 2500000:
- /* Write UART Clock setting of 24MHz */
- DEBUG0("Change UART_CLOCK 24Mhz\n");
- SendCommand(VSC_WRITE_UART_CLOCK_SETTING,
- VSC_WRITE_UART_CLOCK_SETTING_LEN,
- (UINT8 *) & uart_clock_24);
- read_event(fd, buffer);
- break;
-
- case 3000000:
- case 4000000:
- /* Write UART Clock setting of 48MHz */
- DEBUG0("Change UART_CLOCK 48Mh\nz");
- SendCommand(VSC_WRITE_UART_CLOCK_SETTING,
- VSC_WRITE_UART_CLOCK_SETTING_LEN,
- (UINT8 *) & uart_clock_48);
- read_event(fd, buffer);
- break;
-
- default:
- fprintf(stderr, "Not Support baudrate = %ld\n", baudrate);
- exit_err(1);
- break;
- }
-
- hci_data[2] = baudrate & 0xFF;
- hci_data[3] = (baudrate >> 8) & 0xFF;
- hci_data[4] = (baudrate >> 16) & 0xFF;
- hci_data[5] = (baudrate >> 24) & 0xFF;
-
- DEBUG1("Change Baudrate %ld\n", baudrate);
-
- SendCommand(HCI_BRCM_UPDATE_BAUDRATE_CMD,
- HCI_BRCM_UPDATE_BAUD_RATE_UNENCODED_LENGTH,
- (UINT8 *) hci_data);
- read_event(fd, buffer);
-
- tcflush(fd, TCIOFLUSH);
- tcgetattr(fd, &termios);
- cfmakeraw(&termios);
- termios.c_cflag |= CRTSCTS;
-
- if (use_two_stop_bits)
- termios.c_cflag |= CSTOPB;
-
- tcsetattr(fd, TCSANOW, &termios);
- tcflush(fd, TCIOFLUSH);
- tcsetattr(fd, TCSANOW, &termios);
- tcflush(fd, TCIOFLUSH);
- tcflush(fd, TCIOFLUSH);
- cfsetospeed(&termios, uart_speed(baudrate));
- cfsetispeed(&termios, uart_speed(baudrate));
- tcsetattr(fd, TCSANOW, &termios);
-
-}
-
-void EnableTestMode(void)
-{
- UINT8 filter_data[] = { 0x02, 0x00, 0x02 };
-
- /* bt sleep disable */
- HCILP_Enable(FALSE);
-
- /* Enable both Inquiry & Page Scans */
- SetScanEnable();
-
- /* Set Event Filter: Enable Auto Connect */
- SendCommand(HCI_SET_EVENT_FILTER, 0x03, (UINT8 *) filter_data);
- read_event(fd, buffer);
-
- /* Enable Device under test */
- SendCommand(HCI_ENABLE_DEV_UNDER_TEST_MODE, 0x0, NULL);
- read_event(fd, buffer);
-
- fprintf(stderr, "Enable Device Under Test\n");
-}
-
-void SetLocalFeatures(void)
-{
- UINT8 *data = NULL;
-
- DEBUG0("Read Local Feature\n");
- SendCommand(HCI_READ_LOCAL_FEATURES, 0, NULL);
- read_event(fd, buffer);
-
- data = &buffer[7];
-
-#if (BCM_DISABLE_RF_PWRCTRL == TRUE)
- fprintf(stderr, "Remove Power Control\n");
- data[2] &= 0xFB; /* Power contrel */
-#endif
- DEBUG0("Write Local Feature\n");
- SendCommand(VSC_HCI_CMD_SET_LOC_FEATURES_CMD, 0x08, (UINT8 *) data);
- read_event(fd, buffer);
-}
-
-void EnbleHCI(void)
-{
- int i = N_HCI;
- int proto = HCI_UART_H4;
-
- if (ioctl(fd, TIOCSETD, &i) < 0) {
- fprintf(stderr, "Can't set line discipline\n");
- return;
- }
-
- if (ioctl(fd, HCIUARTSETPROTO, proto) < 0) {
- fprintf(stderr, "Can't set hci protocol\n");
- return;
- }
- fprintf(stderr, "Done setting line discpline\n");
- return;
-
-}
-
-void print_usage(void)
-{
- fprintf(stderr, "\n");
- fprintf(stderr, "BRCM BT tool for Linux release %s\n", RELEASE_DATE);
- fprintf(stderr, "\n");
- fprintf(stderr,
- " Usage: bcmtool <tty Device> <command> [command parameter],....\n\n");
- fprintf(stderr,
- " -FILE Patchram file name EX) -FILE=BCM43xx_xxx.hcd\n");
- fprintf(stderr,
- " -BAUD Set Baudrate EX) -BAUD=3000000\n");
- fprintf(stderr,
- " -ADDR BD addr file name EX) -ADDR=.bdaddr\n");
- fprintf(stderr, " -SCO Enable SCO/PCM config EX) -SCO\n");
- fprintf(stderr,
- " -SETSCO SCO/PCM values verify EX) -SETSCO=0,1,0,1,1,0,0,3,3,0\n");
- fprintf(stderr, " -LP Enable Low power EX) -LP\n");
- fprintf(stderr, " -FEATURE Set local Feature EX) -FEATURE\n");
- fprintf(stderr,
- " -DUT Enable DUT mode(do not use with -LP) EX) -DUT\n");
- fprintf(stderr,
- " -ATTACH Attach BT controller to BlueZ stack EX) -ATTACH\n");
- fprintf(stderr, " -DEBUG Debug message EX) -DEBUG\n");
- fprintf(stderr, " -CSTOPB Set two stop bits for tty EX) -CSTOPB\n");
- fprintf(stderr, "\n");
-}
-
-int main(int argc, char *argv[])
-{
- UINT8 i = 0;
-
- if (argc < 2) {
- print_usage();
- exit(1);
- } else {
- fprintf(stderr, "BRCM BT tool for Linux release %s\n",
- RELEASE_DATE);
- }
-
-#if (DEPLOY_4335A_AXI_BRIDGE_PATCH == TRUE)
- hw_4335_axi_bridge_lock();
- usleep(50000);
-#endif
-
- /* Open dev port */
- if ((fd = open(argv[1], O_RDWR | O_NOCTTY)) == -1) {
- fprintf(stderr, "port %s could not be opened, error %d\n",
- argv[1], errno);
- exit(2);
- }
-
- tcflush(fd, TCIOFLUSH);
- tcgetattr(fd, &termios);
- cfmakeraw(&termios);
- termios.c_cflag |= CRTSCTS;
-
- if (use_two_stop_bits)
- termios.c_cflag |= CSTOPB;
-
- tcsetattr(fd, TCSANOW, &termios);
- tcflush(fd, TCIOFLUSH);
- tcsetattr(fd, TCSANOW, &termios);
- tcflush(fd, TCIOFLUSH);
- tcflush(fd, TCIOFLUSH);
- cfsetospeed(&termios, B115200);
- cfsetispeed(&termios, B115200);
- tcsetattr(fd, TCSANOW, &termios);
-
- signal(SIGALRM, expired);
-
- for (i = 2; i < argc; i++) {
- char *ptr = argv[i];
-
- if (strstr(ptr, "-DEBUG")) {
- debug_mode = TRUE;
- DEBUG0("DEBUG On\n");
- break;
- }
-
- if (strstr(ptr, "-CSTOPB")) {
- use_two_stop_bits = TRUE;
- DEBUG0("Use two stop bits for tty\n");
- break;
- }
- }
-
- for (i = 2; i < argc; i++) {
- char *ptr = argv[i];
-
- if (ptr == NULL)
- continue;
-
- fprintf(stderr, "[%d] %s\n", i - 1, ptr);
-
- if (strstr(ptr, "-FILE=")) {
- char prm_name[128];
-
- ptr += 6;
-
- strncpy(prm_name, ptr, 127);
- DownloadPatchram(prm_name);
-
- } else if (strstr(ptr, "-BAUD=")) {
- UINT32 baudrate;
-
- ptr += 6;
- baudrate = atoi(ptr);
-
- ChangeBaudRate(baudrate);
- } else if (strstr(ptr, "-ADDR=")) {
- char *bdaddr_filename;
- FILE *pFile = NULL;
-
- int bdaddr[10]; /* Displayed BD Address */
-
- BD_ADDR local_addr; /* BD Address for write */
-
-#if 0
- ptr += 6;
- if (sscanf
- (ptr, "%02X:%02X:%02X:%02X:%02X:%02X", &bdaddr[0],
- &bdaddr[1], &bdaddr[2], &bdaddr[3], &bdaddr[4],
- &bdaddr[5]) != 6) {
- fprintf(stderr, "-ADDR: Parameter error");
- exit_err(1);
- }
- bte_write_bdaddr(bdaddr);
-#endif
- ptr += 6;
- bdaddr_filename = ptr;
-
- if (bdaddr_filename) {
- pFile = fopen(bdaddr_filename, "r");
- }
-
- if (pFile) {
- char text[BTUI_MAX_STRING_LENGTH_PER_LINE];
-
- fgets(text, BTUI_MAX_STRING_LENGTH_PER_LINE,
- pFile);
- sscanf(text, "%02x%02x", &bdaddr[0],
- &bdaddr[1]);
-
- fgets(text, BTUI_MAX_STRING_LENGTH_PER_LINE,
- pFile);
- sscanf(text, "%02x", &bdaddr[2]);
-
- fgets(text, BTUI_MAX_STRING_LENGTH_PER_LINE,
- pFile);
- sscanf(text, "%02x%02x%02x", &bdaddr[3],
- &bdaddr[4], &bdaddr[5]);
-
- fprintf(stderr,
- "Writing B/D Address = %02X:%02X:%02X:%02X:%02X:%02X\n",
- bdaddr[0], bdaddr[1], bdaddr[2],
- bdaddr[3], bdaddr[4], bdaddr[5]);
-
- ROTATE_BD_ADDR(local_addr, bdaddr);
-
- SendCommand(VSC_WRITE_BD_ADDR, BD_ADDR_LEN,
- (UINT8 *) local_addr);
- read_event(fd, buffer);
- } else {
- fprintf(stderr, "-ADDR: file open fail\n");
- exit_err(1);
- }
-
- } else if (strstr(ptr, "-SCO")) {
- SetAudio();
-
- } else if (strstr(ptr, "-SETSCO=")) {
- ptr += 8;
- int value[10];
-
- if (sscanf
- (ptr, "%d,%d,%d,%d,%d,%d,%d,%d,%d,%d", &value[0],
- &value[1], &value[2], &value[3], &value[4],
- &value[5], &value[6], &value[7], &value[8],
- &value[9]) != 10) {
- DEBUG0("PCM / SCO configuration value err\n");
- DEBUG0
- ("SCO_Routing,PCM_Interface_Rate,Frame_Type,Sync_Mode,Clock_Mode,LSB_First,Fill_bits,Fill_Method,Fill_Num,Right_Justify\n");
- exit_err(1);
- }
-
- SetScoConf(value[0], value[1], value[2], value[3],
- value[4]);
- SetPcmConf(value[5], value[6], value[7], value[8],
- value[9]);
- SetAudio();
- } else if (strstr(ptr, "-LP")) {
- HCILP_Enable(TRUE);
- } else if (strstr(ptr, "-DUT")) {
- EnableTestMode();
- } else if (strstr(ptr, "-FEATURE")) {
- SetLocalFeatures();
- } else if (strstr(ptr, "-ATTACH")) {
- EnbleHCI();
- while (1) {
- sleep(UINT_MAX);
- }
- } else if (strstr(ptr, "-DEBUG")) {
- } else if (strstr(ptr, "-CSTOPB")) {
-
- } else {
- fprintf(stderr, "Invalid parameter(s)!\n");
- exit_err(1);
- }
- }
-
- fprintf(stderr, "EXIT\n");
- close(fd);
- exit(0);
-
- return 0;
-}
projects / platform / adaptation / bluetooth-firmware-bcm.git / commitdiff