s5p6442: smdk6442: Add csa partition

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

Rename the header of a animation frame container.

Merge branch 'master' of minjames@party:/pub/git/u-boot-s5pc1xx

Revert "p1p2: separate.patch & relation.patch"

This reverts commit 468bf8aff858d05230b27642075904ef0fd4e3c9.

s5pc110: KEYPAD: Enable CLK_KEYIF

p1p2: separate.patch & relation.patch

Merge branch 'master' of mj.ham@party:/pub/git/u-boot-s5pc1xx

charger: faster reaction to power key in U-boot TA charging.

s5pc110: mmc: calculated mmc0 capacity
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

charger: animation supports 4b bmp: (about 250byte per frame)

charger: animation while TA charging at u-boot

TODO1: use 4-bit bmp rather than 32-bit bmp.
TODO2: add charging text
TODO3: restore logo when resuming from charging animatino.

s5pc110: changed board name.

Signed-off-by: daeinki <inki.dae@samsung.com>

s5pc110: modified ARIES board detection.

Signed-off-by: daeinki <inki.dae@samsung.com>

s5pc110: kesler: add kesler rev09 board

Signed-off-by: Hakgoo Lee <goodguy.lee@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5p6442: Workaround fix EVT1 imprecise abort error

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5pc110: aquila: Update Memory timings

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: aquila: Fix OneDRAM memory timings

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

build: Update dofmind user setting

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5p6442: smdk6442: Modify config file of smdk6442

ttySAC1, 80 + 256M

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5p6442: smdk6442: Use MTDPARTS_DEFAULT_4KB

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5pc11x: CQ H0100076547 Defect: Bootup with TA on

After the charging animation is done, press any key to boot.

Merge branch 'master' of daeinki@10.89.8.158:/pub/git/u-boot-s5pc1xx

s5pc110: lcd: bug fix.

Signed-off-by: daeinki <inki.dae@samsung.com>

s5p6442: smdk6442: Fix mem info

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5p6442: smdk6442: Set memory config of MCP_C_TYPE

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5pc110: s6e63m0: Modify gamma value

s5pc110: lcd: modifed gpio setting and register setting for Cypress.

Signed-off-by: daeinki <inki.dae@samsung.com>

s5pc110: aquila: Add UBIFS mount option

1. bulk_read: Read more data automatically
2. no_chk_data_crc: No data CRC check

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc1xx: mmc: increase max block size

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: mmc: add comment in mmc_prepare_data()
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

Merge branch 'master' of jaehoon@party:/pub/git/u-boot-s5pc1xx

s5pc110: mmc: enable multi-write moviNAND
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

smdk6442: Add EVT1 support configuration

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

smdk6442: Only 8KiB size support

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

OneNAND: Superload command support

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc1xx: mmc: Enable Feedback Clock

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc1xx: gpio: fix drv offset

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5p6442: smdk6442: Support usb downloader

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5pc1xx: mmc: set gpio drv

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

usbd: add support rfs movinand downloading

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5p6442: smdk6442: Use 667MHz

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5p6442: smdk6442: Modify prompt to SMDK6442 #

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5p6442: smdk6442: Use memcpy32 for onenand_ipl

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5p6442: smdk6442: Enable OneNAND boot

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5pc110: GPIO setting related w/ CP as H/W dept suggested

- PHONE_ACTIVE GPH1[7]: Input / No Pull
- PDA_ACTIVE GPJ0[0]: Input / Pull-Down
- RESET_REQ_N MP0_1[2]: Output High
- GPS_CLK_INT MP0_4[6]: Output Low
- AP_FLM_TX/RX GPA1[2,3]: Input / No PUll

Merge branch 'master' of mj.ham@party:/pub/git/u-boot-s5pc1xx

s5pc110: updated GPIO PDN mode related w/ CP: REST_REQ_N(MP0_1[2])

Merge branch 'master' of http://git.denx.de/u-boot

Conflicts:

common/env_onenand.c

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5p6442: smdk6442: Add checksum

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

OneNAND: Fix wrong bad block handling at read/write

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Onenand: Add alignment for memcpy32

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

smdk6442: Use 8KiB internal RAM for boot

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

OneNAND: Add memory barrier

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5p6442: smdk6442: support onenand_ipl compile

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5p6442: smdk6442: Enable onenand(except write)

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5p6442: smdk6442: Enable boot & serial

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5p6442: smdk6442: fix compile error

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5p6442: smdk6442: initial work

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

usbd: add CSA Clear

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

Merge branch 'master' of git://git.denx.de/u-boot-arm

Merge branch 'master' of git://git.denx.de/u-boot-nand-flash

Merge branch 'master' of git://git.denx.de/u-boot-usb

Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx

usb: musb: add virtual root hub control support

For MUSB devices that do not support multipoint (hubs), we have to emulate
a root hub so that we can support core operations like resetting ports.

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

usbd: increase partition array to 16

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

Add missing file at merge

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Merge branch 'master' of http://git.denx.de/u-boot

Conflicts:

common/env_onenand.c
drivers/mtd/onenand/onenand_base.c
include/linux/mtd/onenand_regs.h

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: aquila: Don't include modem code

It's only used for debugging

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

OneNAND: Remove unused codes

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: aquila: New memory timing (not yet tested)

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: aquila: Add gitignore

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: aquila: Use correct name at comments

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Adds EHCI definitions to sequoia board configuration file.

Adds required definitions for EHCI support in sequoia configuration file.
But still keeps the OHCI as default driver.

Signed-off-by: Chris Zhang <chris@seamicro.com>

Add ppc440epx USB ehci support.

Currently ppc440epx uses OHCI for USB full-speed support. This change adds
support for EHCI.

Signed-off-by: Chris Zhang <chris@seamicro.com>

Fix EHCI port reset.

In USB ehci driver, the port reset is not terminated. EHCI spec says "A host
 controller must terminate the reset and stabilize the state of the port within
 2 milliseconds". Without termination, a port stays at reset state. This is
 observed on ppc4xx(sequoia) boards.

Signed-off-by: Chris Zhang <chris@seamicro.com>

omap3: fix compile warning

This patch fixes this warning during compile:

omap3.c: In function 'musb_platform_init':
omap3.c:126: warning: label 'end' defined but not used

Problem reported by: Dirk Behme[dirk.behme@googlemail.com]

Signed-off-by: Sanjeev Premi <premi@ti.com>

usb: musb: add support for Blackfin MUSB

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Remy Bohmer <linux@bohmer.net>

usb: musb: change rxcsr register from write to read/modify/write

The RX Control/Status register has bits that we want to preserve, so don't
just write out a single bit.  Preserve the others bits in the process.

The original code posted to the u-boot list had this behavior, but looks
like it was lost somewhere along the way to merging.

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Remy Bohmer <linux@bohmer.net>

usb: musb: make multipoint optional

The multipoint handling under MUSB is optional, and some parts (like the
Blackfin processor) do not implement support for it.

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Remy Bohmer <linux@bohmer.net>

usb: musb: make fifo support configurable

The dynamic FIFO handling under MUSB is optional, and some parts (like
the Blackfin processor) do not implement support for it.

Due to this, the FIFO reading/writing steps need special handling, so
mark the common versions weak so drivers can override.

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Remy Bohmer <linux@bohmer.net>

usb: musb: make sure the register layout is packed

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Remy Bohmer <linux@bohmer.net>

DA830: Add usb config

Adding USB configuration. Default is set for USB MSC host.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Swaminathan S <swami.iyer@ti.com>

DA8xx: Add MUSB host support

Tested USB host functionality on DA830 EVM.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Swaminathan S <swami.iyer@ti.com>

DA8xx: Add GPIO register definitions

Added DA8xx GPIO base addresses in gpio_defs.h and pointers
to different BANKs which can be used to program GPIOs.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Swaminathan S <swami.iyer@ti.com>

DA830: Add pinmux for USB0_DRVVBUS

USB0_DRVVBUS pinmux configuration is required for USB functinality
in uboot.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Swaminathan S <swami.iyer@ti.com>

s5pc110:aquila:add 'bamboo' board
Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>

mpc83xx: add support configure bus parking

Add support to configure bus parking mode and master in bus arbitration
configuration (ACR). Add this for the kmeter1 port:

Configure bus arbiter with recommended values from Freescale
to improve bus latency/throughput for application with
intensive QuiccEngine activity.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

mpc83xx: vme8349: Fix power up reset sequence for tsi148

Remove PCI reset, if there is a monarch PMC module.

Signed-off-by: Reinhard Arlt <reinhard.arlt@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
convert clrbits_be32 + setbits_be32 to clrsetbits_be32, use out_be32 to set gcr.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

mpc83xx: Add support for MPC8349 esd caddy2

The caddy2 is a variant of the already supported vme8349. So we just
add the differences to this board port. To better support those two
boards we switched from fixed SDRAM configuration to usage of
spd_sdram(). This is done by providing a board specific SPD EEPROM
routine with different values for both boards.

Signed-off-by: Reinhard Arlt <reinhard.arlt@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
changed to use mkconfig -t option instead, plus misc codingstyle fixes.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

mpc83xx: spd_sdram.c: Disable memory controller before initializing

The memory controller could already be enabled, when spd_sdram() is
called. This could be the case for example, when the SDRAM is initialized
by the JTAG debugger.

The "sync" after the register access via the accessor function is
still needed, because the macro uses the sync before the real write
is done. So until not all accesses are converted to using accessor
functions, this sync still needs to be made "manually" here.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd.eu>
Acked-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

mpc83xx: Add NAND boot support for MPC8315E-RDB boards

The core support for NAND booting is there already, so this patch
is pretty straightforward.

There is one trick though: top level Makefile expects nand_spl to
be in nand_spl/board/$(BOARDDIR), but we can fully reuse the code
from mpc8313erdb boards, and so to not duplicate the code we just
symlink nand_spl/board/freescale/mpc8315erdb to mpc8313erdb.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
o silence make during ln echo
o update documentation
o and avoid:

$ ./MAKEALL MPC8315ERDB_NAND
Configuring for MPC8315ERDB board...
sdram.o: In function `fixed_sdram':
/home/r1aaha/git/u-boot/nand_spl/board/freescale/mpc8313erdb/sdram.c:72: undefined reference to `udelay'

by renaming udelay -> __udelay in the spirit of commit
3eb90bad651fab39cffba750ec4421a9c01d60e7 "Generic udelay() with watchdog
support".

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

Merge branch 'master' of dgkim@party:/pub/git/u-boot-s5pc1xx

Revert "s5pc110:aquila:add 'bamboo' board"

This reverts commit e3979bde8e25e60075890d1fe7410cdcc011cbfe.

s5pc110: suspend/resume: EVT1: OTHERS CF Retention

s5pc110: aquila: Add CSA partition automatically

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: aquila: create the csa image

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: aquila: Add csa partition

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110:aquila:add 'bamboo' board
Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>

s5pc110: fix wrong PLL_LOCK offset

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc1xx: remove unnecessary header files

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>