arm: Remove IXP425 boards pdnb3 and scpu
authorStefan Roese <sr@denx.de>
Tue, 24 Sep 2013 06:22:19 +0000 (08:22 +0200)
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>
Thu, 17 Oct 2013 07:28:08 +0000 (09:28 +0200)
Remove Prodrive pdnb3 board (including the scpu variant) support
from mainline. As its unmaintained and not needed any more for
quite some time.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Martijn de Gouw <martijn.de.gouw@prodrive.nl>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
board/prodrive/pdnb3/Makefile [deleted file]
board/prodrive/pdnb3/flash.c [deleted file]
board/prodrive/pdnb3/nand.c [deleted file]
board/prodrive/pdnb3/pdnb3.c [deleted file]
boards.cfg
doc/README.scrapyard
include/configs/pdnb3.h [deleted file]

diff --git a/board/prodrive/pdnb3/Makefile b/board/prodrive/pdnb3/Makefile
deleted file mode 100644 (file)
index 5e4a909..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:     GPL-2.0+
-#
-
-include $(TOPDIR)/config.mk
-
-LIB    = $(obj)lib$(BOARD).o
-
-COBJS  := flash.o pdnb3.o nand.o
-
-SRCS   := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS   := $(addprefix $(obj),$(COBJS))
-SOBJS  := $(addprefix $(obj),$(SOBJS))
-
-$(LIB):        $(obj).depend $(OBJS)
-       $(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/prodrive/pdnb3/flash.c b/board/prodrive/pdnb3/flash.c
deleted file mode 100644 (file)
index 75b5d05..0000000
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/ixp425.h>
-
-#if !defined(CONFIG_FLASH_CFI_DRIVER)
-
-/*
- * include common flash code (for esd boards)
- */
-#include "../common/flash.c"
-
-/*
- * Prototypes
- */
-static ulong flash_get_size (vu_long * addr, flash_info_t * info);
-
-static inline ulong ld(ulong x)
-{
-       ulong k = 0;
-
-       while (x >>= 1)
-               ++k;
-
-       return k;
-}
-
-unsigned long flash_init(void)
-{
-       unsigned long size;
-       int i;
-
-       /* Init: no FLASHes known */
-       for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; i++)
-               flash_info[i].flash_id = FLASH_UNKNOWN;
-
-       size = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
-       if (flash_info[0].flash_id == FLASH_UNKNOWN)
-               printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-                       size, size<<20);
-
-       /* Reconfigure CS0 to actual FLASH size */
-       *IXP425_EXP_CS0 = (*IXP425_EXP_CS0 & ~0x00003C00) | ((ld(size) - 9) << 10);
-
-       /* Monitor protection ON by default */
-       flash_protect(FLAG_PROTECT_SET,
-                     CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
-                     &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
-
-       /* Environment protection ON by default */
-       flash_protect(FLAG_PROTECT_SET,
-                     CONFIG_ENV_ADDR,
-                     CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
-                     &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
-
-       /* Redundant environment protection ON by default */
-       flash_protect(FLAG_PROTECT_SET,
-                     CONFIG_ENV_ADDR_REDUND,
-                     CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
-                     &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
-
-       flash_info[0].size = size;
-
-       return size;
-}
-
-#endif /* CONFIG_FLASH_CFI_DRIVER */
diff --git a/board/prodrive/pdnb3/nand.c b/board/prodrive/pdnb3/nand.c
deleted file mode 100644 (file)
index e1d2c63..0000000
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#include <common.h>
-
-#if defined(CONFIG_CMD_NAND)
-
-#include <nand.h>
-
-struct pdnb3_ndfc_regs {
-       uchar cmd;
-       uchar wait;
-       uchar addr;
-       uchar term;
-       uchar data;
-};
-
-static u8 hwctl;
-static struct pdnb3_ndfc_regs *pdnb3_ndfc;
-
-#define readb(addr)    *(volatile u_char *)(addr)
-#define readl(addr)    *(volatile u_long *)(addr)
-#define writeb(d,addr) *(volatile u_char *)(addr) = (d)
-
-/*
- * The PDNB3 has a NAND Flash Controller (NDFC) that handles all accesses to
- * the NAND devices.  The NDFC has command, address and data registers that
- * when accessed will set up the NAND flash pins appropriately.  We'll use the
- * hwcontrol function to save the configuration in a global variable.
- * We can then use this information in the read and write functions to
- * determine which NDFC register to access.
- *
- * There is one NAND devices on the board, a Hynix HY27US08561A (32 MByte).
- */
-static void pdnb3_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-       struct nand_chip *this = mtd->priv;
-
-       if (ctrl & NAND_CTRL_CHANGE) {
-               if ( ctrl & NAND_CLE )
-                       hwctl |= 0x1;
-               else
-                       hwctl &= ~0x1;
-               if ( ctrl & NAND_ALE )
-                       hwctl |= 0x2;
-               else
-                       hwctl &= ~0x2;
-               if ( (ctrl & NAND_NCE) != NAND_NCE)
-                       writeb(0x00, &(pdnb3_ndfc->term));
-       }
-       if (cmd != NAND_CMD_NONE)
-               writeb(cmd, this->IO_ADDR_W);
-}
-
-
-static u_char pdnb3_nand_read_byte(struct mtd_info *mtd)
-{
-       return readb(&(pdnb3_ndfc->data));
-}
-
-static void pdnb3_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
-{
-       int i;
-
-       for (i = 0; i < len; i++) {
-               if (hwctl & 0x1)
-                       writeb(buf[i], &(pdnb3_ndfc->cmd));
-               else if (hwctl & 0x2)
-                       writeb(buf[i], &(pdnb3_ndfc->addr));
-               else
-                       writeb(buf[i], &(pdnb3_ndfc->data));
-       }
-}
-
-static void pdnb3_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
-{
-       int i;
-
-       for (i = 0; i < len; i++)
-               buf[i] = readb(&(pdnb3_ndfc->data));
-}
-
-static int pdnb3_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
-{
-       int i;
-
-       for (i = 0; i < len; i++)
-               if (buf[i] != readb(&(pdnb3_ndfc->data)))
-                       return i;
-
-       return 0;
-}
-
-static int pdnb3_nand_dev_ready(struct mtd_info *mtd)
-{
-       /*
-        * Blocking read to wait for NAND to be ready
-        */
-       readb(&(pdnb3_ndfc->wait));
-
-       /*
-        * Return always true
-        */
-       return 1;
-}
-
-int board_nand_init(struct nand_chip *nand)
-{
-       pdnb3_ndfc = (struct pdnb3_ndfc_regs *)CONFIG_SYS_NAND_BASE;
-
-       nand->ecc.mode = NAND_ECC_SOFT;
-
-       /* Set address of NAND IO lines (Using Linear Data Access Region) */
-       nand->IO_ADDR_R = (void __iomem *) ((ulong) pdnb3_ndfc + 0x4);
-       nand->IO_ADDR_W = (void __iomem *) ((ulong) pdnb3_ndfc + 0x4);
-       /* Reference hardware control function */
-       nand->cmd_ctrl   = pdnb3_nand_hwcontrol;
-       nand->read_byte  = pdnb3_nand_read_byte;
-       nand->write_buf  = pdnb3_nand_write_buf;
-       nand->read_buf   = pdnb3_nand_read_buf;
-       nand->verify_buf = pdnb3_nand_verify_buf;
-       nand->dev_ready  = pdnb3_nand_dev_ready;
-       return 0;
-}
-#endif
diff --git a/board/prodrive/pdnb3/pdnb3.c b/board/prodrive/pdnb3/pdnb3.c
deleted file mode 100644 (file)
index fa320da..0000000
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <malloc.h>
-#include <asm/arch/ixp425.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* predefine these here for FPGA programming (before including fpga.c) */
-#define SET_FPGA(data) *IXP425_GPIO_GPOUTR = (data)
-#define FPGA_DONE_STATE (*IXP425_GPIO_GPINR & CONFIG_SYS_FPGA_DONE)
-#define FPGA_INIT_STATE (*IXP425_GPIO_GPINR & CONFIG_SYS_FPGA_INIT)
-#define OLD_VAL                old_val
-
-static unsigned long old_val = 0;
-
-/*
- * include common fpga code (for prodrive boards)
- */
-#include "../common/fpga.c"
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-int board_init(void)
-{
-       /* adress of boot parameters */
-       gd->bd->bi_boot_params = 0x00000100;
-
-       GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_FPGA_RESET);
-       GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_FPGA_RESET);
-
-       GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_SYS_RUNNING);
-       GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_SYS_RUNNING);
-
-       /*
-        * Setup GPIO's for FPGA programming
-        */
-       GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_PRG);
-       GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_CLK);
-       GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_DATA);
-       GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PRG);
-       GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_CLK);
-       GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DATA);
-       GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_INIT);
-       GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_DONE);
-
-       /*
-        * Setup GPIO's for interrupts
-        */
-       GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI_INTA);
-       GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI_INTA);
-       GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI_INTB);
-       GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI_INTB);
-       GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_RESTORE_INT);
-       GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_RESTORE_INT);
-       GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_RESTART_INT);
-       GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_RESTART_INT);
-
-       /*
-        * Setup GPIO's for 33MHz clock output
-        */
-       *IXP425_GPIO_GPCLKR = 0x01FF0000;
-       GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_CLK_33M);
-
-       /*
-        * Setup other chip select's
-        */
-       *IXP425_EXP_CS1 = CONFIG_SYS_EXP_CS1;
-
-       return 0;
-}
-
-/*
- * Check Board Identity
- */
-int checkboard(void)
-{
-       char buf[64];
-       int i = getenv_f("serial#", buf, sizeof(buf));
-
-       puts("Board: PDNB3");
-
-       if (i > 0) {
-               puts(", serial# ");
-               puts(buf);
-       }
-       putc('\n');
-
-       return (0);
-}
-
-int dram_init(void)
-{
-       gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-       gd->bd->bi_dram[0].size  = PHYS_SDRAM_1_SIZE;
-
-       return (0);
-}
-
-int do_fpga_boot(unsigned char *fpgadata)
-{
-       unsigned char *dst;
-       int status;
-       int index;
-       int i;
-       ulong len = CONFIG_SYS_MALLOC_LEN;
-
-       /*
-        * Setup GPIO's for FPGA programming
-        */
-       GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_PRG);
-       GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_CLK);
-       GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_DATA);
-
-       /*
-        * Save value so no readback is required upon programming
-        */
-       old_val = *IXP425_GPIO_GPOUTR;
-
-       /*
-        * First try to decompress fpga image (gzip compressed?)
-        */
-       dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
-       if (gunzip(dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
-               printf("Error: Image has to be gzipp'ed!\n");
-               return -1;
-       }
-
-       status = fpga_boot(dst, len);
-       if (status != 0) {
-               printf("\nFPGA: Booting failed ");
-               switch (status) {
-               case ERROR_FPGA_PRG_INIT_LOW:
-                       printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
-                       break;
-               case ERROR_FPGA_PRG_INIT_HIGH:
-                       printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
-                       break;
-               case ERROR_FPGA_PRG_DONE:
-                       printf("(Timeout: DONE not high after programming FPGA)\n ");
-                       break;
-               }
-
-               /* display infos on fpgaimage */
-               index = 15;
-               for (i=0; i<4; i++) {
-                       len = dst[index];
-                       printf("FPGA: %s\n", &(dst[index+1]));
-                       index += len+3;
-               }
-               putc ('\n');
-               /* delayed reboot */
-               for (i=5; i>0; i--) {
-                       printf("Rebooting in %2d seconds \r",i);
-                       for (index=0;index<1000;index++)
-                               udelay(1000);
-               }
-               putc('\n');
-               do_reset(NULL, 0, 0, NULL);
-       }
-
-       puts("FPGA:  ");
-
-       /* display infos on fpgaimage */
-       index = 15;
-       for (i=0; i<4; i++) {
-               len = dst[index];
-               printf("%s ", &(dst[index+1]));
-               index += len+3;
-       }
-       putc('\n');
-
-       free(dst);
-
-       /*
-        * Reset FPGA
-        */
-       GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_FPGA_RESET);
-       udelay(10);
-       GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_FPGA_RESET);
-
-       return (0);
-}
-
-int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-       ulong addr;
-
-       if (argc < 2)
-               return cmd_usage(cmdtp);
-
-       addr = simple_strtoul(argv[1], NULL, 16);
-
-       return do_fpga_boot((unsigned char *)addr);
-}
-
-U_BOOT_CMD(
-       fpga,     2,     0,      do_fpga,
-       "boot FPGA",
-       "address size\n    - boot FPGA with gzipped image at <address>"
-);
-
-#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
-extern struct pci_controller hose;
-extern void pci_ixp_init(struct pci_controller * hose);
-
-void pci_init_board(void)
-{
-       extern void pci_ixp_init (struct pci_controller *hose);
-
-       pci_ixp_init(&hose);
-}
-#endif
index aa2ee64..7869474 100644 (file)
@@ -366,8 +366,6 @@ Active  arm         ixp            -           -               actux1
 Active  arm         ixp            -           -               actux1              actux1_4_32                          actux1:FLASH2X2,RAM_32MB                                                                                                          Michael Schwingen <michael@schwingen.org>
 Active  arm         ixp            -           -               actux1              actux1_8_16                          actux1:FLASH1X8                                                                                                                   Michael Schwingen <michael@schwingen.org>
 Active  arm         ixp            -           -               actux1              actux1_8_32                          actux1:FLASH1X8,RAM_32MB                                                                                                          Michael Schwingen <michael@schwingen.org>
-Active  arm         ixp            -           prodrive        pdnb3               pdnb3                                -                                                                                                                                 Stefan Roese <sr@denx.de>
-Active  arm         ixp            -           prodrive        pdnb3               scpu                                 pdnb3:SCPU                                                                                                                        Stefan Roese <sr@denx.de>
 Active  arm         pxa            -           -               -                   balloon3                             -                                                                                                                                 Marek Vasut <marek.vasut@gmail.com>
 Active  arm         pxa            -           -               -                   h2200                                -                                                                                                                                 Lukasz Dalek <luk0104@gmail.com>
 Active  arm         pxa            -           -               -                   palmld                               -                                                                                                                                 Marek Vasut <marek.vasut@gmail.com>
index 0f9a486..151dbdf 100644 (file)
@@ -11,7 +11,9 @@ easily if here is something they might want to dig for...
 
 Board            Arch        CPU            Commit      Removed     Last known maintainer/contact
 =================================================================================================
-omap1510inn      arm         arm925t        -           -           Kshitij Gupta <kshitij@ti.com>
+pdnb3            arm         ixp            -           2013-09-24  Stefan Roese <sr@denx.de>
+scpu             arm         ixp            -           2013-09-24  Stefan Roese <sr@denx.de>
+omap1510inn      arm         arm925t        0610a16     2013-09-23  Kshitij Gupta <kshitij@ti.com>
 CANBT            powerpc     405CR          fb8f4fd     2013-08-07  Matthias Fuchs <matthias.fuchs@esd.eu>
 Alaska8220       powerpc     mpc8220        d6ed322     2013-05-11
 Yukon8220        powerpc     mpc8220        d6ed322     2013-05-11
diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h
deleted file mode 100644 (file)
index d3e9017..0000000
+++ /dev/null
@@ -1,322 +0,0 @@
-/*
- * (C) Copyright 2006-2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * Configuation settings for the PDNB3 board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_IXP425          1       /* This is an IXP425 CPU        */
-#define CONFIG_PDNB3           1       /* on an PDNB3 board            */
-
-#define        CONFIG_MACH_TYPE        1002
-
-#define CONFIG_DISPLAY_CPUINFO 1       /* display cpu info (and speed) */
-#define CONFIG_DISPLAY_BOARDINFO 1     /* display board info           */
-
-/*
- * Ethernet
- */
-#define CONFIG_IXP4XX_NPE      1       /* include IXP4xx NPE support   */
-#define        CONFIG_PHY_ADDR         16      /* NPE0 PHY address             */
-#define CONFIG_HAS_ETH1
-#define CONFIG_PHY1_ADDR       18      /* NPE1 PHY address             */
-#define CONFIG_MII             1       /* MII PHY management           */
-#define CONFIG_SYS_RX_ETH_BUFFER       16      /* Number of ethernet rx buffers & descriptors */
-
-/*
- * Misc configuration options
- */
-#define CONFIG_BOOTCOUNT_LIMIT         /* support for bootcount limit  */
-#define CONFIG_SYS_BOOTCOUNT_ADDR      0x60003000 /* inside qmrg sram          */
-
-#define CONFIG_CMDLINE_TAG     1       /* enable passing of ATAGs      */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG      1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN          (1 << 20)
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_IXP_SERIAL
-#define CONFIG_BAUDRATE         115200
-#define CONFIG_SYS_IXP425_CONSOLE      IXP425_UART1   /* we use UART1 for console */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_PING
-
-#if !defined(CONFIG_SCPU)
-#define CONFIG_CMD_NAND
-#endif
-
-
-#define CONFIG_ZERO_BOOTDELAY_CHECK    /* check for keypress on bootdelay==0 */
-#define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds     */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP                            /* undef to save memory         */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt       */
-#define CONFIG_SYS_CBSIZE              256             /* Console I/O Buffer Size      */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS             16              /* max number of command args   */
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE      /* Boot Argument Buffer Size    */
-
-#define CONFIG_SYS_MEMTEST_START       0x00400000      /* memtest works on     */
-#define CONFIG_SYS_MEMTEST_END         0x00800000      /* 4 ... 8 MB in DRAM   */
-#define CONFIG_SYS_LOAD_ADDR           0x00010000      /* default load address */
-
-#define CONFIG_IXP425_TIMER_CLK                66666666
-#define CONFIG_SYS_HZ                  1000            /* decrementer freq: 1 ms ticks */
-
-/***************************************************************
- * Platform/Board specific defines start here.
- ***************************************************************/
-
-/*-----------------------------------------------------------------------
- * Default configuration (environment varibles...)
- *----------------------------------------------------------------------*/
-#define CONFIG_PREBOOT "echo;" \
-       "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
-       "echo"
-
-#undef CONFIG_BOOTARGS
-
-#define        CONFIG_EXTRA_ENV_SETTINGS                                       \
-       "netdev=eth0\0"                                                 \
-       "hostname=pdnb3\0"                                              \
-       "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
-               "nfsroot=${serverip}:${rootpath}\0"                     \
-       "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
-       "addip=setenv bootargs ${bootargs} ethaddr=${ethaddr} "         \
-               "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
-               ":${hostname}:${netdev}:off panic=1\0"                  \
-       "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate} " \
-       "mtdparts=${mtdparts}\0"                                        \
-       "flash_nfs=run nfsargs addip addtty;"                           \
-               "bootm ${kernel_addr}\0"                                \
-       "flash_self=run ramargs addip addtty;"                          \
-               "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
-       "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
-               "bootm\0"                                               \
-       "rootpath=/opt/buildroot\0"                                     \
-       "bootfile=/tftpboot/netbox/uImage\0"                            \
-       "kernel_addr=50080000\0"                                        \
-       "ramdisk_addr=50200000\0"                                       \
-       "load=tftp 100000 /tftpboot/netbox/u-boot.bin\0"                \
-       "update=protect off 50000000 5007dfff;era 50000000 5007dfff;"   \
-               "cp.b 100000 50000000 ${filesize};"                     \
-               "setenv filesize;saveenv\0"                             \
-       "upd=run load update\0"                                         \
-       "ipaddr=10.0.0.233\0"                                           \
-       "serverip=10.0.0.152\0"                                         \
-       "netmask=255.255.0.0\0"                                         \
-       "ethaddr=c6:6f:13:36:f3:81\0"                                   \
-       "eth1addr=c6:6f:13:36:f3:82\0"                                  \
-       "mtdparts=IXP4XX-Flash.0:504k@0(uboot),4k@504k(env),"           \
-       "4k@508k(renv)\0"                                               \
-       ""
-#define CONFIG_BOOTCOMMAND     "run net_nfs"
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS    1          /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1            0x00000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE       0x02000000 /* 32 MB */
-
-#define CONFIG_SYS_TEXT_BASE          0x50000000
-#define CONFIG_SYS_FLASH_BASE          0x50000000
-#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_FLASH_BASE
-#if defined(CONFIG_SCPU)
-#define CONFIG_SYS_MONITOR_LEN         (384 << 10)     /* Reserve 512 kB for Monitor   */
-#else
-#define CONFIG_SYS_MONITOR_LEN         (504 << 10)     /* Reserve 512 kB for Monitor   */
-#endif
-
-/*
- * Expansion bus settings
- */
-#if defined(CONFIG_SCPU)
-#define CONFIG_SYS_EXP_CS0             0x94d23C42      /* 8bit, max size               */
-#else
-#define CONFIG_SYS_EXP_CS0             0x94913C43      /* 8bit, max size               */
-#endif
-#define CONFIG_SYS_EXP_CS1             0x85000043      /* 8bit, 512bytes               */
-
-/*
- * SDRAM settings
- */
-#define CONFIG_SYS_SDR_CONFIG          0x18
-#define CONFIG_SYS_SDR_MODE_CONFIG     0x1
-#define CONFIG_SYS_SDRAM_REFRESH_CNT   0x81a
-
-/*
- * FLASH and environment organization
- */
-#if defined(CONFIG_SCPU)
-#define CONFIG_SYS_FLASH_CFI                           /* The flash is CFI compatible  */
-#define CONFIG_FLASH_CFI_DRIVER                        /* Use common CFI driver        */
-#define CONFIG_SYS_FLASH_CFI_WIDTH     FLASH_CFI_16BIT /* no byte writes on IXP4xx     */
-#endif
-
-#define FLASH_BASE0_PRELIM     CONFIG_SYS_FLASH_BASE           /* FLASH bank #0        */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max number of memory banks           */
-#define CONFIG_SYS_MAX_FLASH_SECT      256     /* max number of sectors on one chip    */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT    120000  /* Timeout for Flash Erase (in ms)      */
-#define CONFIG_SYS_FLASH_WRITE_TOUT    1000    /* Timeout for Flash Write (in ms)      */
-
-#define CONFIG_SYS_FLASH_WORD_SIZE     unsigned char   /* flash word size (width)      */
-#define CONFIG_SYS_FLASH_ADDR0         0x5555  /* 1st address for flash config cycles  */
-#define CONFIG_SYS_FLASH_ADDR1         0x2AAA  /* 2nd address for flash config cycles  */
-/*
- * The following defines are added for buggy IOP480 byte interface.
- * All other boards should use the standard values (CPCI405 etc.)
- */
-#define CONFIG_SYS_FLASH_READ0         0x0000  /* 0 is standard                        */
-#define CONFIG_SYS_FLASH_READ1         0x0001  /* 1 is standard                        */
-#define CONFIG_SYS_FLASH_READ2         0x0002  /* 2 is standard                        */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO            /* print 'E' for empty sector on flinfo */
-
-#define        CONFIG_ENV_IS_IN_FLASH  1
-
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
-#if defined(CONFIG_SCPU)
-/* no redundant environment on SCPU */
-#define CONFIG_ENV_SECT_SIZE   0x20000 /* size of one complete sector          */
-#define        CONFIG_ENV_SIZE         0x4000  /* Total Size of Environment Sector     */
-#else
-#define CONFIG_ENV_SECT_SIZE   0x1000  /* size of one complete sector          */
-#define        CONFIG_ENV_SIZE         0x1000  /* Total Size of Environment Sector     */
-
-/* Address and size of Redundant Environment Sector    */
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
-#endif
-
-#if !defined(CONFIG_SCPU)
-/*
- * NAND-FLASH stuff
- */
-#define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_SYS_NAND_BASE           0x51000000      /* NAND FLASH Base Address */
-#endif
-
-/*
- * GPIO settings
- */
-
-/* FPGA program pin configuration */
-#define CONFIG_SYS_GPIO_PRG            12              /* FPGA program pin (cpu output)*/
-#define CONFIG_SYS_GPIO_CLK            10              /* FPGA clk pin (cpu output)    */
-#define CONFIG_SYS_GPIO_DATA           14              /* FPGA data pin (cpu output)   */
-#define CONFIG_SYS_GPIO_INIT           13              /* FPGA init pin (cpu input)    */
-#define CONFIG_SYS_GPIO_DONE           11              /* FPGA done pin (cpu input)    */
-
-/* other GPIO's */
-#define CONFIG_SYS_GPIO_RESTORE_INT    0
-#define CONFIG_SYS_GPIO_RESTART_INT    1
-#define CONFIG_SYS_GPIO_SYS_RUNNING    2
-#define CONFIG_SYS_GPIO_PCI_INTA       3
-#define CONFIG_SYS_GPIO_PCI_INTB       4
-#define CONFIG_SYS_GPIO_I2C_SCL        6
-#define CONFIG_SYS_GPIO_I2C_SDA        7
-#define CONFIG_SYS_GPIO_FPGA_RESET     9
-#define CONFIG_SYS_GPIO_CLK_33M        15
-
-/*
- * I2C stuff
- */
-
-/* enable I2C and select the hardware/software driver */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT            /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SOFT_SPEED      83000   /* 83 kHz is supposed to work */
-#define CONFIG_SYS_I2C_SOFT_SLAVE      0xFE
-/*
- * Software (bit-bang) I2C driver configuration
- */
-#define PB_SCL         (1 << CONFIG_SYS_GPIO_I2C_SCL)
-#define PB_SDA         (1 << CONFIG_SYS_GPIO_I2C_SDA)
-
-#define I2C_INIT       GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_I2C_SCL)
-#define I2C_ACTIVE     GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_I2C_SDA)
-#define I2C_TRISTATE   GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_I2C_SDA)
-#define I2C_READ       ((*IXP425_GPIO_GPINR & PB_SDA) != 0)
-#define I2C_SDA(bit)   if (bit) GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_I2C_SDA);      \
-                       else     GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_I2C_SDA)
-#define I2C_SCL(bit)   if (bit) GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_I2C_SCL);      \
-                       else     GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_I2C_SCL)
-#define I2C_DELAY      udelay(3)       /* 1/4 I2C clock duration */
-
-/*
- * I2C RTC
- */
-#if 0 /* test-only */
-#define CONFIG_RTC_DS1340      1
-#define CONFIG_SYS_I2C_RTC_ADDR        0x68
-#else
-/* M41T11 Serial Access Timekeeper(R) SRAM */
-#define CONFIG_RTC_M41T11      1
-#define CONFIG_SYS_I2C_RTC_ADDR        0x68
-#define CONFIG_SYS_M41T11_BASE_YEAR    1900    /* play along with the linux driver */
-#endif
-
-/*
- * Spartan3 FPGA configuration support
- */
-#define CONFIG_SYS_FPGA_MAX_SIZE       700*1024        /* 700kByte for XC3S500E        */
-
-#define CONFIG_SYS_FPGA_PRG    (1 << CONFIG_SYS_GPIO_PRG)      /* FPGA program pin (cpu output)*/
-#define CONFIG_SYS_FPGA_CLK    (1 << CONFIG_SYS_GPIO_CLK)      /* FPGA clk pin (cpu output)    */
-#define CONFIG_SYS_FPGA_DATA   (1 << CONFIG_SYS_GPIO_DATA)     /* FPGA data pin (cpu output)   */
-#define CONFIG_SYS_FPGA_INIT   (1 << CONFIG_SYS_GPIO_INIT)     /* FPGA init pin (cpu input)    */
-#define CONFIG_SYS_FPGA_DONE   (1 << CONFIG_SYS_GPIO_DONE)     /* FPGA done pin (cpu input)    */
-
-/*
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE      32
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_SDRAM_BASE          0x00000000
-#define CONFIG_SYS_INIT_SP_ADDR        \
-       (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-#endif  /* __CONFIG_H */