OMAP3: Add Pandora support

Add Pandora support.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>

diff --git a/MAINTAINERS b/MAINTAINERS
index cec5ec3..1f0fba8 100644 (file)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -530,6 +530,10 @@ Sascha Hauer <s.hauer@pengutronix.de>
        imx31_litekit   i.MX31
        imx31_phycore   i.MX31
 
+Grazvydas Ignotas <notasas@gmail.com>
+
+       omap3_pandora   ARM CORTEX-A8 (OMAP3xx SoC)
+
 Gary Jennejohn <gj@denx.de>
 
        smdk2400        ARM920T

diff --git a/MAKEALL b/MAKEALL
index 0aaad20..f52d554 100755 (executable)
--- a/MAKEALL
+++ b/MAKEALL
@@ -551,6 +551,7 @@ LIST_ARM_CORTEX_A8="                \
        omap3_beagle            \
        omap3_overo             \
        omap3_evm               \
+       omap3_pandora           \
 "
 
 #########################################################################

diff --git a/Makefile b/Makefile
index b74bfb7..a362760 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -2917,6 +2917,9 @@ omap3_overo_config :      unconfig
 omap3_evm_config :     unconfig
        @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm omap3 omap3
 
+omap3_pandora_config : unconfig
+       @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora omap3 omap3
+
 #########################################################################
 ## XScale Systems
 #########################################################################

diff --git a/board/omap3/common/Makefile b/board/omap3/common/Makefile
index 0b251c5..e55aefb 100644 (file)
--- a/board/omap3/common/Makefile
+++ b/board/omap3/common/Makefile
@@ -31,6 +31,7 @@ LIB   = $(obj)lib$(VENDOR).a
 
 COBJS-$(CONFIG_OMAP3_BEAGLE) += power.o
 COBJS-$(CONFIG_OMAP3_OVERO) += power.o
+COBJS-$(CONFIG_OMAP3_PANDORA) += power.o
 
 COBJS  := $(COBJS-y)
 SRCS   := $(COBJS:.o=.c)

diff --git a/board/omap3/pandora/Makefile b/board/omap3/pandora/Makefile
new file mode 100644 (file)
index 0000000..b41e8a0
--- /dev/null
+++ b/board/omap3/pandora/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB    = $(obj)lib$(BOARD).a
+
+COBJS  := pandora.o
+
+SRCS   := $(COBJS:.o=.c)
+OBJS   := $(addprefix $(obj),$(COBJS))
+
+$(LIB):        $(obj).depend $(OBJS)
+       $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+       rm -f $(OBJS)
+
+distclean:     clean
+       rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

diff --git a/board/omap3/pandora/config.mk b/board/omap3/pandora/config.mk
new file mode 100644 (file)
index 0000000..6b1f69a
--- /dev/null
+++ b/board/omap3/pandora/config.mk
@@ -0,0 +1,33 @@
+#
+# (C) Copyright 2006
+# Texas Instruments, <www.ti.com>
+#
+# Pandora uses OMAP3 (ARM-CortexA8) cpu
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# Physical Address:
+# 8000'0000 (bank0)
+# A000/0000 (bank1)
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# For use with external or internal boots.
+TEXT_BASE = 0x80e80000

diff --git a/board/omap3/pandora/pandora.c b/board/omap3/pandora/pandora.c
new file mode 100644 (file)
index 0000000..3f9de99
--- /dev/null
+++ b/board/omap3/pandora/pandora.c
@@ -0,0 +1,92 @@
+/*
+ * (C) Copyright 2008
+ * Grazvydas Ignotas <notasas@gmail.com>
+ *
+ * Derived from Beagle Board, 3430 SDP, and OMAP3EVM code by
+ *     Richard Woodruff <r-woodruff2@ti.com>
+ *     Syed Mohammed Khasim <khasim@ti.com>
+ *     Sunil Kumar <sunilsaini05@gmail.com>
+ *     Shashi Ranjan <shashiranjanmca05@gmail.com>
+ *
+ * (C) Copyright 2004-2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-types.h>
+#include "pandora.h"
+
+/******************************************************************************
+ * Routine: board_init
+ * Description: Early hardware init.
+ *****************************************************************************/
+int board_init(void)
+{
+       DECLARE_GLOBAL_DATA_PTR;
+
+       gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+       /* board id for Linux */
+       gd->bd->bi_arch_number = MACH_TYPE_OMAP3_PANDORA;
+       /* boot param addr */
+       gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+       return 0;
+}
+
+/******************************************************************************
+ * Routine: misc_init_r
+ * Description: Configure board specific parts
+ *****************************************************************************/
+int misc_init_r(void)
+{
+       gpio_t *gpio1_base = (gpio_t *)OMAP34XX_GPIO1_BASE;
+       gpio_t *gpio4_base = (gpio_t *)OMAP34XX_GPIO4_BASE;
+       gpio_t *gpio5_base = (gpio_t *)OMAP34XX_GPIO5_BASE;
+       gpio_t *gpio6_base = (gpio_t *)OMAP34XX_GPIO6_BASE;
+
+       power_init_r();
+
+       /* Configure GPIOs to output */
+       writel(~(GPIO14 | GPIO15 | GPIO16 | GPIO23), &gpio1_base->oe);
+       writel(~GPIO22, &gpio4_base->oe);       /* 118 */
+       writel(~(GPIO0 | GPIO1 | GPIO28 | GPIO29 | GPIO30 | GPIO31),
+               &gpio5_base->oe);       /* 128, 129, 156-159 */
+       writel(~GPIO4, &gpio6_base->oe);        /* 164 */
+
+       /* Set GPIOs */
+       writel(GPIO28, &gpio5_base->setdataout);
+       writel(GPIO4, &gpio6_base->setdataout);
+
+       return 0;
+}
+
+/******************************************************************************
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ *             hardware. Many pins need to be moved from protect to primary
+ *             mode.
+ *****************************************************************************/
+void set_muxconf_regs(void)
+{
+       MUX_PANDORA();
+}

diff --git a/board/omap3/pandora/pandora.h b/board/omap3/pandora/pandora.h
new file mode 100644 (file)
index 0000000..8525a03
--- /dev/null
+++ b/board/omap3/pandora/pandora.h
@@ -0,0 +1,420 @@
+/*
+ * (C) Copyright 2008
+ * Grazvydas Ignotas <notasas@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _PANDORA_H_
+#define _PANDORA_H_
+
+const omap3_sysinfo sysinfo = {
+       SDP_3430_V1,
+       SDP_3430_V2,
+       DDR_STACKED,
+       "3530",
+       "OMAP3 Pandora",
+       "NAND",
+};
+
+/*
+ * IEN  - Input Enable
+ * IDIS - Input Disable
+ * PTD  - Pull type Down
+ * PTU  - Pull type Up
+ * DIS  - Pull type selection is inactive
+ * EN  - Pull type selection is active
+ * M0  - Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_PANDORA() \
+ /*SDRC*/\
+ MUX_VAL(CP(SDRC_D0),          (IEN  | PTD | DIS | M0)) /*SDRC_D0*/\
+ MUX_VAL(CP(SDRC_D1),          (IEN  | PTD | DIS | M0)) /*SDRC_D1*/\
+ MUX_VAL(CP(SDRC_D2),          (IEN  | PTD | DIS | M0)) /*SDRC_D2*/\
+ MUX_VAL(CP(SDRC_D3),          (IEN  | PTD | DIS | M0)) /*SDRC_D3*/\
+ MUX_VAL(CP(SDRC_D4),          (IEN  | PTD | DIS | M0)) /*SDRC_D4*/\
+ MUX_VAL(CP(SDRC_D5),          (IEN  | PTD | DIS | M0)) /*SDRC_D5*/\
+ MUX_VAL(CP(SDRC_D6),          (IEN  | PTD | DIS | M0)) /*SDRC_D6*/\
+ MUX_VAL(CP(SDRC_D7),          (IEN  | PTD | DIS | M0)) /*SDRC_D7*/\
+ MUX_VAL(CP(SDRC_D8),          (IEN  | PTD | DIS | M0)) /*SDRC_D8*/\
+ MUX_VAL(CP(SDRC_D9),          (IEN  | PTD | DIS | M0)) /*SDRC_D9*/\
+ MUX_VAL(CP(SDRC_D10),         (IEN  | PTD | DIS | M0)) /*SDRC_D10*/\
+ MUX_VAL(CP(SDRC_D11),         (IEN  | PTD | DIS | M0)) /*SDRC_D11*/\
+ MUX_VAL(CP(SDRC_D12),         (IEN  | PTD | DIS | M0)) /*SDRC_D12*/\
+ MUX_VAL(CP(SDRC_D13),         (IEN  | PTD | DIS | M0)) /*SDRC_D13*/\
+ MUX_VAL(CP(SDRC_D14),         (IEN  | PTD | DIS | M0)) /*SDRC_D14*/\
+ MUX_VAL(CP(SDRC_D15),         (IEN  | PTD | DIS | M0)) /*SDRC_D15*/\
+ MUX_VAL(CP(SDRC_D16),         (IEN  | PTD | DIS | M0)) /*SDRC_D16*/\
+ MUX_VAL(CP(SDRC_D17),         (IEN  | PTD | DIS | M0)) /*SDRC_D17*/\
+ MUX_VAL(CP(SDRC_D18),         (IEN  | PTD | DIS | M0)) /*SDRC_D18*/\
+ MUX_VAL(CP(SDRC_D19),         (IEN  | PTD | DIS | M0)) /*SDRC_D19*/\
+ MUX_VAL(CP(SDRC_D20),         (IEN  | PTD | DIS | M0)) /*SDRC_D20*/\
+ MUX_VAL(CP(SDRC_D21),         (IEN  | PTD | DIS | M0)) /*SDRC_D21*/\
+ MUX_VAL(CP(SDRC_D22),         (IEN  | PTD | DIS | M0)) /*SDRC_D22*/\
+ MUX_VAL(CP(SDRC_D23),         (IEN  | PTD | DIS | M0)) /*SDRC_D23*/\
+ MUX_VAL(CP(SDRC_D24),         (IEN  | PTD | DIS | M0)) /*SDRC_D24*/\
+ MUX_VAL(CP(SDRC_D25),         (IEN  | PTD | DIS | M0)) /*SDRC_D25*/\
+ MUX_VAL(CP(SDRC_D26),         (IEN  | PTD | DIS | M0)) /*SDRC_D26*/\
+ MUX_VAL(CP(SDRC_D27),         (IEN  | PTD | DIS | M0)) /*SDRC_D27*/\
+ MUX_VAL(CP(SDRC_D28),         (IEN  | PTD | DIS | M0)) /*SDRC_D28*/\
+ MUX_VAL(CP(SDRC_D29),         (IEN  | PTD | DIS | M0)) /*SDRC_D29*/\
+ MUX_VAL(CP(SDRC_D30),         (IEN  | PTD | DIS | M0)) /*SDRC_D30*/\
+ MUX_VAL(CP(SDRC_D31),         (IEN  | PTD | DIS | M0)) /*SDRC_D31*/\
+ MUX_VAL(CP(SDRC_CLK),         (IEN  | PTD | DIS | M0)) /*SDRC_CLK*/\
+ MUX_VAL(CP(SDRC_DQS0),                (IEN  | PTD | DIS | M0)) /*SDRC_DQS0*/\
+ MUX_VAL(CP(SDRC_DQS1),                (IEN  | PTD | DIS | M0)) /*SDRC_DQS1*/\
+ MUX_VAL(CP(SDRC_DQS2),                (IEN  | PTD | DIS | M0)) /*SDRC_DQS2*/\
+ MUX_VAL(CP(SDRC_DQS3),                (IEN  | PTD | DIS | M0)) /*SDRC_DQS3*/\
+ /*GPMC*/\
+ MUX_VAL(CP(GPMC_A1),          (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\
+ MUX_VAL(CP(GPMC_A2),          (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\
+ MUX_VAL(CP(GPMC_A3),          (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\
+ MUX_VAL(CP(GPMC_A4),          (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\
+ MUX_VAL(CP(GPMC_A5),          (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\
+ MUX_VAL(CP(GPMC_A6),          (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\
+ MUX_VAL(CP(GPMC_A7),          (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\
+ MUX_VAL(CP(GPMC_A8),          (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\
+ MUX_VAL(CP(GPMC_A9),          (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\
+ MUX_VAL(CP(GPMC_A10),         (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\
+ MUX_VAL(CP(GPMC_D0),          (IEN  | PTD | DIS | M0)) /*GPMC_D0*/\
+ MUX_VAL(CP(GPMC_D1),          (IEN  | PTD | DIS | M0)) /*GPMC_D1*/\
+ MUX_VAL(CP(GPMC_D2),          (IEN  | PTD | DIS | M0)) /*GPMC_D2*/\
+ MUX_VAL(CP(GPMC_D3),          (IEN  | PTD | DIS | M0)) /*GPMC_D3*/\
+ MUX_VAL(CP(GPMC_D4),          (IEN  | PTD | DIS | M0)) /*GPMC_D4*/\
+ MUX_VAL(CP(GPMC_D5),          (IEN  | PTD | DIS | M0)) /*GPMC_D5*/\
+ MUX_VAL(CP(GPMC_D6),          (IEN  | PTD | DIS | M0)) /*GPMC_D6*/\
+ MUX_VAL(CP(GPMC_D7),          (IEN  | PTD | DIS | M0)) /*GPMC_D7*/\
+ MUX_VAL(CP(GPMC_D8),          (IEN  | PTD | DIS | M0)) /*GPMC_D8*/\
+ MUX_VAL(CP(GPMC_D9),          (IEN  | PTD | DIS | M0)) /*GPMC_D9*/\
+ MUX_VAL(CP(GPMC_D10),         (IEN  | PTD | DIS | M0)) /*GPMC_D10*/\
+ MUX_VAL(CP(GPMC_D11),         (IEN  | PTD | DIS | M0)) /*GPMC_D11*/\
+ MUX_VAL(CP(GPMC_D12),         (IEN  | PTD | DIS | M0)) /*GPMC_D12*/\
+ MUX_VAL(CP(GPMC_D13),         (IEN  | PTD | DIS | M0)) /*GPMC_D13*/\
+ MUX_VAL(CP(GPMC_D14),         (IEN  | PTD | DIS | M0)) /*GPMC_D14*/\
+ MUX_VAL(CP(GPMC_D15),         (IEN  | PTD | DIS | M0)) /*GPMC_D15*/\
+ MUX_VAL(CP(GPMC_NCS0),                (IDIS | PTU | EN  | M0)) /*GPMC_nCS0*/\
+ MUX_VAL(CP(GPMC_NCS1),                (IDIS | PTU | EN  | M0)) /*GPMC_nCS1*/\
+ MUX_VAL(CP(GPMC_NCS2),                (IDIS | PTU | EN  | M0)) /*GPMC_nCS2*/\
+ MUX_VAL(CP(GPMC_NCS3),                (IDIS | PTU | EN  | M0)) /*GPMC_nCS3*/\
+ MUX_VAL(CP(GPMC_NCS4),                (IDIS | PTU | EN  | M0))\
+ MUX_VAL(CP(GPMC_NCS5),                (IDIS | PTD | DIS | M0))\
+ MUX_VAL(CP(GPMC_NCS6),                (IEN  | PTD | DIS | M1))\
+ MUX_VAL(CP(GPMC_NCS7),                (IEN  | PTU | EN  | M1))\
+ MUX_VAL(CP(GPMC_NBE1),                (IEN  | PTD | DIS | M0))\
+ MUX_VAL(CP(GPMC_WAIT2),       (IEN  | PTU | EN  | M0))\
+ MUX_VAL(CP(GPMC_WAIT3),       (IEN  | PTU | EN  | M0))\
+ MUX_VAL(CP(GPMC_CLK),         (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\
+ MUX_VAL(CP(GPMC_NADV_ALE),    (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\
+ MUX_VAL(CP(GPMC_NOE),         (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
+ MUX_VAL(CP(GPMC_NWE),         (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\
+ MUX_VAL(CP(GPMC_NBE0_CLE),    (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\
+ MUX_VAL(CP(GPMC_NWP),         (IEN  | PTD | DIS | M0)) /*GPMC_nWP*/\
+ MUX_VAL(CP(GPMC_WAIT0),       (IEN  | PTU | EN  | M0)) /*GPMC_WAIT0*/\
+ MUX_VAL(CP(GPMC_WAIT1),       (IEN  | PTU | EN  | M0)) /*GPMC_WAIT1*/\
+ /*DSS*/\
+ MUX_VAL(CP(DSS_PCLK),         (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\
+ MUX_VAL(CP(DSS_HSYNC),                (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\
+ MUX_VAL(CP(DSS_VSYNC),                (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\
+ MUX_VAL(CP(DSS_ACBIAS),       (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\
+ MUX_VAL(CP(DSS_DATA0),                (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\
+ MUX_VAL(CP(DSS_DATA1),                (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\
+ MUX_VAL(CP(DSS_DATA2),                (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\
+ MUX_VAL(CP(DSS_DATA3),                (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\
+ MUX_VAL(CP(DSS_DATA4),                (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\
+ MUX_VAL(CP(DSS_DATA5),                (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\
+ MUX_VAL(CP(DSS_DATA6),                (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\
+ MUX_VAL(CP(DSS_DATA7),                (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\
+ MUX_VAL(CP(DSS_DATA8),                (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\
+ MUX_VAL(CP(DSS_DATA9),                (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\
+ MUX_VAL(CP(DSS_DATA10),       (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\
+ MUX_VAL(CP(DSS_DATA11),       (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\
+ MUX_VAL(CP(DSS_DATA12),       (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\
+ MUX_VAL(CP(DSS_DATA13),       (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\
+ MUX_VAL(CP(DSS_DATA14),       (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\
+ MUX_VAL(CP(DSS_DATA15),       (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\
+ MUX_VAL(CP(DSS_DATA16),       (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\
+ MUX_VAL(CP(DSS_DATA17),       (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\
+ MUX_VAL(CP(DSS_DATA18),       (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\
+ MUX_VAL(CP(DSS_DATA19),       (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
+ MUX_VAL(CP(DSS_DATA20),       (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
+ MUX_VAL(CP(DSS_DATA21),       (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\
+ MUX_VAL(CP(DSS_DATA22),       (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
+ MUX_VAL(CP(DSS_DATA23),       (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
+ /*GPIO based game buttons*/\
+ MUX_VAL(CP(CAM_XCLKA),                (IEN  | PTU | DIS | M4)) /*GPIO_96 - LEFT*/\
+ MUX_VAL(CP(CAM_PCLK),         (IEN  | PTU | DIS | M4)) /*GPIO_97 - L2*/\
+ MUX_VAL(CP(CAM_FLD),          (IEN  | PTU | DIS | M4)) /*GPIO_98 - RIGHT*/\
+ MUX_VAL(CP(CAM_D0),           (IEN  | PTU | DIS | M4)) /*GPIO_99 - MENU*/\
+ MUX_VAL(CP(CAM_D1),           (IEN  | PTU | DIS | M4)) /*GPIO_100 - START*/\
+ MUX_VAL(CP(CAM_D2),           (IEN  | PTU | DIS | M4)) /*GPIO_101 - Y*/\
+ MUX_VAL(CP(CAM_D3),           (IEN  | PTU | DIS | M4)) /*GPIO_102 - L1*/\
+ MUX_VAL(CP(CAM_D4),           (IEN  | PTU | DIS | M4)) /*GPIO_103 - DOWN*/\
+ MUX_VAL(CP(CAM_D5),           (IEN  | PTU | DIS | M4)) /*GPIO_104 - SELECT*/\
+ MUX_VAL(CP(CAM_D6),           (IEN  | PTU | DIS | M4)) /*GPIO_105 - R1*/\
+ MUX_VAL(CP(CAM_D7),           (IEN  | PTU | DIS | M4)) /*GPIO_106 - B*/\
+ MUX_VAL(CP(CAM_D8),           (IEN  | PTU | DIS | M4)) /*GPIO_107 - R2*/\
+ MUX_VAL(CP(CAM_D10),          (IEN  | PTU | DIS | M4)) /*GPIO_109 - X*/\
+ MUX_VAL(CP(CAM_D11),          (IEN  | PTU | DIS | M4)) /*GPIO_110 - UP*/\
+ MUX_VAL(CP(CAM_XCLKB),                (IEN  | PTU | DIS | M4)) /*GPIO_111 - A*/\
+ /*Audio Interface To External DAC (Headphone, Speakers)*/\
+ MUX_VAL(CP(MCBSP2_FSX),       (IDIS | PTD | DIS | M0)) /*McBSP2_FSX*/\
+ MUX_VAL(CP(MCBSP2_CLKX),      (IDIS | PTD | DIS | M0)) /*McBSP2_CLKX*/\
+ MUX_VAL(CP(MCBSP2_DX),                (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\
+ MUX_VAL(CP(MCBSP_CLKS),       (IEN  | PTU | DIS | M0)) /*McBSP_CLKS*/\
+ MUX_VAL(CP(MCBSP2_DR),                (IDIS | PTD | DIS | M4)) /*GPIO_118*/\
+                                                        /* - nPOWERDOWN_DAC*/\
+ /*Expansion card 1*/\
+ MUX_VAL(CP(MMC1_CLK),         (IDIS | PTU | EN  | M0)) /*MMC1_CLK*/\
+ MUX_VAL(CP(MMC1_CMD),         (IEN  | PTU | EN  | M0)) /*MMC1_CMD*/\
+ MUX_VAL(CP(MMC1_DAT0),                (IEN  | PTU | EN  | M0)) /*MMC1_DAT0*/\
+ MUX_VAL(CP(MMC1_DAT1),                (IEN  | PTU | EN  | M0)) /*MMC1_DAT1*/\
+ MUX_VAL(CP(MMC1_DAT2),                (IEN  | PTU | EN  | M0)) /*MMC1_DAT2*/\
+ MUX_VAL(CP(MMC1_DAT3),                (IEN  | PTU | EN  | M0)) /*MMC1_DAT3*/\
+ MUX_VAL(CP(MMC1_DAT4),                (IEN  | PTD | DIS | M4)) /*GPIO_126 - MMC1_WP*/\
+ /*Expansion card 2*/\
+ MUX_VAL(CP(MMC2_CLK),         (IDIS | PTD | DIS | M0)) /*MMC2_CLK*/\
+ MUX_VAL(CP(MMC2_CMD),         (IEN  | PTU | EN  | M0)) /*MMC2_CMD*/\
+ MUX_VAL(CP(MMC2_DAT0),                (IEN  | PTU | EN  | M0)) /*MMC2_DAT0*/\
+ MUX_VAL(CP(MMC2_DAT1),                (IEN  | PTU | EN  | M0)) /*MMC2_DAT1*/\
+ MUX_VAL(CP(MMC2_DAT2),                (IEN  | PTU | EN  | M0)) /*MMC2_DAT2*/\
+ MUX_VAL(CP(MMC2_DAT3),                (IEN  | PTU | EN  | M0)) /*MMC2_DAT3*/\
+ MUX_VAL(CP(MMC2_DAT4),                (IDIS | PTD | DIS | M1)) /*MMC2_DIR_DAT0*/\
+ MUX_VAL(CP(MMC2_DAT5),                (IDIS | PTD | DIS | M1)) /*MMC2_DIR_DAT1*/\
+ MUX_VAL(CP(MMC2_DAT6),                (IDIS | PTD | DIS | M1)) /*MMC2_DIR_CMD */\
+ MUX_VAL(CP(MMC2_DAT7),                (IEN  | PTU | EN  | M1)) /*MMC2_CLKIN*/\
+ MUX_VAL(CP(MMC1_DAT5),                (IEN  | PTD | DIS | M4)) /*GPIO_127 - MMC2_WP*/\
+ /*SDIO Interface to WIFI Module*/\
+ MUX_VAL(CP(ETK_CLK_ES2),      (IDIS | PTU | EN  | M2)) /*MMC3_CLK*/\
+ MUX_VAL(CP(ETK_CTL_ES2),      (IEN  | PTD | DIS | M2)) /*MMC3_CMD*/\
+ MUX_VAL(CP(ETK_D4_ES2),       (IEN  | PTD | DIS | M2)) /*MMC3_DAT0*/\
+ MUX_VAL(CP(ETK_D5_ES2),       (IEN  | PTD | DIS | M2)) /*MMC3_DAT1*/\
+ MUX_VAL(CP(ETK_D6_ES2),       (IEN  | PTD | DIS | M2)) /*MMC3_DAT2*/\
+ MUX_VAL(CP(ETK_D3_ES2),       (IEN  | PTD | DIS | M2)) /*MMC3_DAT3*/\
+ /*Audio Interface To Bluetooth chip*/\
+ MUX_VAL(CP(MCBSP3_DX),                (IDIS | PTD | DIS | M0)) /*McBSP3_DX*/\
+ MUX_VAL(CP(MCBSP3_DR),                (IEN  | PTD | DIS | M0)) /*McBSP3_DR*/\
+ MUX_VAL(CP(MCBSP3_CLKX),      (IEN  | PTD | DIS | M0)) /*McBSP3_CLKX*/\
+ MUX_VAL(CP(MCBSP3_FSX),       (IEN  | PTD | DIS | M0)) /*McBSP3_FSX*/\
+ /*Digital Interface to Bluetooth (UART)*/\
+ MUX_VAL(CP(UART1_TX),         (IDIS | PTD | DIS | M0)) /*UART1_TX*/\
+ MUX_VAL(CP(UART1_RTS),                (IDIS | PTD | DIS | M0)) /*UART1_RTS*/\
+ MUX_VAL(CP(UART1_CTS),                (IEN  | PTU | EN  | M0)) /*UART1_CTS*/\
+ MUX_VAL(CP(UART1_RX),         (IEN  | PTD | DIS | M0)) /*UART1_RX*/\
+ /*Audio Interface to Triton2 chip (TPS65950)*/\
+ MUX_VAL(CP(MCBSP4_CLKX),      (IEN  | PTD | DIS | M0)) /*McBSP4_CLKX*/\
+ MUX_VAL(CP(MCBSP4_DR),                (IEN  | PTD | DIS | M0)) /*McBSP4_DR*/\
+ MUX_VAL(CP(MCBSP4_DX),                (IDIS | PTD | DIS | M0)) /*McBSP4_DX*/\
+ MUX_VAL(CP(MCBSP4_FSX),       (IEN  | PTD | DIS | M0)) /*McBSP4_FSX*/\
+ /*GPIO definitions for muxed pins on AV connector*/\
+ MUX_VAL(CP(UART2_CTS),                (IEN  | PTU | EN  | M4)) /*GPIO_144,*/\
+                                                        /*UART2_CTS*/\
+ MUX_VAL(CP(UART2_RTS),                (IEN  | PTU | DIS | M4)) /*GPIO_145,*/\
+                                                        /*UART2_RTS*/\
+ MUX_VAL(CP(UART2_TX),         (IEN  | PTU | EN  | M4)) /*GPIO_146,*/\
+                                                        /*UART2_TX*/\
+ MUX_VAL(CP(UART2_RX),         (IEN  | PTD | DIS | M4)) /*GPIO_147,*/\
+                                                        /*UART2_RX*/\
+ /*Serial Interface (Peripheral boot, Linux console, on AV connector)*/\
+ MUX_VAL(CP(UART3_RX_IRRX),    (IEN  | PTD | DIS | M0)) /*UART3_RX*/\
+ MUX_VAL(CP(UART3_TX_IRTX),    (IDIS | PTD | DIS | M0)) /*UART3_TX*/\
+ /*LEDs (Controlled by OMAP)*/\
+ MUX_VAL(CP(MMC1_DAT6),                (IDIS | PTD | DIS | M4)) /*GPIO_128*/\
+                                                        /* - LED_MMC1*/\
+ MUX_VAL(CP(MMC1_DAT7),                (IDIS | PTD | DIS | M4)) /*GPIO_129*/\
+                                                        /* - LED_MMC2*/\
+ MUX_VAL(CP(MCBSP1_DX),                (IDIS | PTD | DIS | M4)) /*GPIO_158*/\
+                                                        /* - LED_BT*/\
+ MUX_VAL(CP(MCBSP1_DR),                (IDIS | PTD | DIS | M4)) /*GPIO_159*/\
+                                                        /* - LED_WIFI*/\
+ /*Switches*/\
+ MUX_VAL(CP(MCSPI1_CS2),       (IEN  | PTU | DIS | M4)) /*GPIO_176*/\
+                                                        /* - nHOLD_SWITCH*/\
+ MUX_VAL(CP(CAM_D9),           (IEN  | PTU | DIS | M4)) /*GPIO_108*/\
+                                                        /* - nLID_SWITCH*/\
+ /*External IRQs*/\
+ MUX_VAL(CP(CAM_HS),           (IEN  | PTU | DIS | M4)) /*GPIO_94*/\
+                                                        /* - nTOUCH_IRQ*/\
+ MUX_VAL(CP(ETK_D7_ES2),       (IEN  | PTD | DIS | M4)) /*GPIO_21*/\
+                                                        /* - WIFI_IRQ*/\
+ MUX_VAL(CP(MCBSP1_FSX),       (IEN  | PTD | DIS | M4)) /*GPIO_161*/\
+                                                        /* - nIRQ_NUB1*/\
+ MUX_VAL(CP(CAM_WEN),          (IEN  | PTU | DIS | M4)) /*GPIO_167*/\
+                                                        /* - nIRQ_NUB2*/\
+ /*Various other stuff*/\
+ MUX_VAL(CP(CAM_VS),           (IEN  | PTU | DIS | M4)) /*GPIO_95*/\
+                                                        /* - nTOUCH_BUSY*/\
+ MUX_VAL(CP(UART3_CTS_RCTX),   (IEN  | PTD | DIS | M4)) /*GPIO_163*/\
+                                                        /* - nOC_USB5*/\
+ MUX_VAL(CP(MCBSP1_CLKX),      (IDIS | PTD | DIS | M4)) /*GPIO_162*/\
+                                                        /* - START_ADC*/\
+ MUX_VAL(CP(ETK_D8_ES2),       (IEN  | PTD | DIS | M4)) /*GPIO_22*/\
+                                                        /* - MSECURE*/\
+ MUX_VAL(CP(CAM_STROBE),       (IEN  | PTU | DIS | M4)) /*GPIO_126*/\
+                                                        /* - HP_DETECT*/\
+ /*External Resets and Enables*/\
+ MUX_VAL(CP(ETK_D0_ES2),       (IDIS | PTD | DIS | M4)) /*GPIO_14*/\
+                                                        /* - nHDPHN_SHUTDOWN*/\
+ MUX_VAL(CP(ETK_D1_ES2),       (IDIS | PTD | DIS | M4)) /*GPIO_15*/\
+                                                        /* - nBT_SHUTDOWN*/\
+ MUX_VAL(CP(ETK_D9_ES2),       (IDIS | PTD | DIS | M4)) /*GPIO_23*/\
+                                                        /* - nWIFI_RESET*/\
+ MUX_VAL(CP(MCBSP1_FSR),       (IDIS | PTU | DIS | M4)) /*GPIO_157*/\
+                                                        /* - nLCD_RESET*/\
+ MUX_VAL(CP(MCBSP1_CLKR),      (IDIS | PTD | DIS | M4)) /*GPIO_156*/\
+                                                        /* - RESET_NUBS*/\
+ MUX_VAL(CP(UART3_RTS_SD),     (IDIS | PTU | EN  | M4)) /*GPIO_164*/\
+                                                        /* - EN_USB_5V*/\
+ /*Unused*/\
+ MUX_VAL(CP(HDQ_SIO),          (IEN  | PTU | EN  | M0)) /*HDQ_SIO - NC*/\
+ MUX_VAL(CP(CSI2_DX0),         (IEN  | PTD | DIS | M0)) /*CSI2_DX0 - NC*/\
+ MUX_VAL(CP(CSI2_DY0),         (IEN  | PTD | DIS | M0)) /*CSI2_DY0 - NC*/\
+ MUX_VAL(CP(CSI2_DX1),         (IEN  | PTD | DIS | M0)) /*CSI2_DX1 - NC*/\
+ MUX_VAL(CP(CSI2_DY1),         (IEN  | PTD | DIS | M0)) /*CSI2_DY1 - NC*/\
+ MUX_VAL(CP(I2C2_SCL),         (IEN  | PTU | EN  | M0)) /*I2C2_SCL - NC*/\
+ MUX_VAL(CP(I2C2_SDA),         (IEN  | PTU | EN  | M0)) /*I2C2_SDA - NC*/\
+ /*HS USB OTG Port (connects to HSUSB0)*/\
+ MUX_VAL(CP(HSUSB0_CLK),       (IEN  | PTD | DIS | M0)) /*HSUSB0_CLK*/\
+ MUX_VAL(CP(HSUSB0_STP),       (IDIS | PTU | EN  | M0)) /*HSUSB0_STP*/\
+ MUX_VAL(CP(HSUSB0_DIR),       (IEN  | PTD | DIS | M0)) /*HSUSB0_DIR*/\
+ MUX_VAL(CP(HSUSB0_NXT),       (IEN  | PTD | DIS | M0)) /*HSUSB0_NXT*/\
+ MUX_VAL(CP(HSUSB0_DATA0),     (IEN  | PTD | DIS | M0)) /*HSUSB0_DATA0*/\
+ MUX_VAL(CP(HSUSB0_DATA1),     (IEN  | PTD | DIS | M0)) /*HSUSB0_DATA1*/\
+ MUX_VAL(CP(HSUSB0_DATA2),     (IEN  | PTD | DIS | M0)) /*HSUSB0_DATA2*/\
+ MUX_VAL(CP(HSUSB0_DATA3),     (IEN  | PTD | DIS | M0)) /*HSUSB0_DATA3*/\
+ MUX_VAL(CP(HSUSB0_DATA4),     (IEN  | PTD | DIS | M0)) /*HSUSB0_DATA4*/\
+ MUX_VAL(CP(HSUSB0_DATA5),     (IEN  | PTD | DIS | M0)) /*HSUSB0_DATA5*/\
+ MUX_VAL(CP(HSUSB0_DATA6),     (IEN  | PTD | DIS | M0)) /*HSUSB0_DATA6*/\
+ MUX_VAL(CP(HSUSB0_DATA7),     (IEN  | PTD | DIS | M0)) /*HSUSB0_DATA7*/\
+ /*I2C Ports*/\
+ MUX_VAL(CP(I2C1_SCL),         (IEN  | PTU | EN  | M0)) /*I2C1_SCL - T2_CTRL*/\
+ MUX_VAL(CP(I2C1_SDA),         (IEN  | PTU | EN  | M0)) /*I2C1_SDA - T2_CTRL*/\
+ MUX_VAL(CP(I2C3_SCL),         (IEN  | PTU | EN  | M0)) /*I2C3_SCL - NUBS*/\
+ MUX_VAL(CP(I2C3_SDA),         (IEN  | PTU | EN  | M0)) /*I2C3_SDA - NUBS*/\
+ MUX_VAL(CP(I2C4_SCL),         (IEN  | PTU | EN  | M0)) /*I2C4_SCL - T2_SR*/\
+ MUX_VAL(CP(I2C4_SDA),         (IEN  | PTU | EN  | M0)) /*I2C4_SDA - T2_SR*/\
+ /*Serial Interface (Touch, LCD control)*/\
+ MUX_VAL(CP(MCSPI1_CLK),       (IEN  | PTD | DIS | M0)) /*McSPI1_CLK*/\
+ MUX_VAL(CP(MCSPI1_SIMO),      (IEN  | PTD | DIS | M0)) /*McSPI1_SIMO*/\
+ MUX_VAL(CP(MCSPI1_SOMI),      (IEN  | PTD | DIS | M0)) /*McSPI1_SOMI*/\
+ MUX_VAL(CP(MCSPI1_CS0),       (IDIS | PTU | EN  | M0)) /*McSPI1_CS0 - TOUCH*/\
+ MUX_VAL(CP(MCSPI1_CS1),       (IDIS | PTU | EN  | M0)) /*McSPI1_CS1 - LCD*/\
+ /*HS USB HOST Port (connects to HSUSB2)*/\
+ MUX_VAL(CP(ETK_D10_ES2),      (IDIS | PTD | DIS | M3)) /*USB_HOST_CLK*/\
+ MUX_VAL(CP(ETK_D11_ES2),      (IDIS | PTU | EN  | M3)) /*USB_HOST_STP*/\
+ MUX_VAL(CP(ETK_D12_ES2),      (IEN  | PTD | DIS | M3)) /*USB_HOST_DIR*/\
+ MUX_VAL(CP(ETK_D13_ES2),      (IEN  | PTD | DIS | M3)) /*USB_HOST_NXT*/\
+ MUX_VAL(CP(ETK_D14_ES2),      (IEN  | PTD | DIS | M3)) /*USB_HOST_D0*/\
+ MUX_VAL(CP(ETK_D15_ES2),      (IEN  | PTD | DIS | M3)) /*USB_HOST_D1*/\
+ MUX_VAL(CP(MCSPI1_CS3),       (IEN  | PTD | DIS | M3)) /*USB_HOST_D2*/\
+ MUX_VAL(CP(MCSPI2_CS1),       (IEN  | PTD | DIS | M3)) /*USB_HOST_D3*/\
+ MUX_VAL(CP(MCSPI2_SIMO),      (IEN  | PTD | DIS | M3)) /*USB_HOST_D4*/\
+ MUX_VAL(CP(MCSPI2_SOMI),      (IEN  | PTD | DIS | M3)) /*USB_HOST_D5*/\
+ MUX_VAL(CP(MCSPI2_CS0),       (IEN  | PTD | DIS | M3)) /*USB_HOST_D6*/\
+ MUX_VAL(CP(MCSPI2_CLK),       (IEN  | PTD | DIS | M3)) /*USB_HOST_D7*/\
+ MUX_VAL(CP(ETK_D2_ES2),       (IDIS | PTD | DIS | M4)) /*GPIO_16*/\
+                                                        /* - nRESET_USB_HOST*/\
+ /*Control and debug */\
+ MUX_VAL(CP(SYS_32K),          (IEN  | PTD | DIS | M0)) /*SYS_32K*/\
+ MUX_VAL(CP(SYS_CLKREQ),       (IEN  | PTD | DIS | M0)) /*SYS_CLKREQ*/\
+ MUX_VAL(CP(SYS_NIRQ),         (IEN  | PTU | EN  | M0)) /*SYS_nIRQ*/\
+ MUX_VAL(CP(SYS_BOOT0),                (IEN  | PTD | DIS | M4)) /*GPIO_2*/\
+ MUX_VAL(CP(SYS_BOOT1),                (IEN  | PTD | DIS | M4)) /*GPIO_3*/\
+ MUX_VAL(CP(SYS_BOOT2),                (IEN  | PTD | DIS | M4)) /*GPIO_4*/\
+ MUX_VAL(CP(SYS_BOOT3),                (IEN  | PTD | DIS | M4)) /*GPIO_5*/\
+ MUX_VAL(CP(SYS_BOOT4),                (IEN  | PTD | DIS | M4)) /*GPIO_6*/\
+ MUX_VAL(CP(SYS_BOOT5),                (IEN  | PTD | DIS | M4)) /*GPIO_7*/\
+ MUX_VAL(CP(SYS_BOOT6),                (IEN  | PTD | DIS | M4)) /*GPIO_8*/\
+ MUX_VAL(CP(SYS_OFF_MODE),     (IEN  | PTD | DIS | M0)) /*SYS_OFF_MODE*/\
+ MUX_VAL(CP(SYS_CLKOUT1),      (IEN  | PTD | DIS | M4)) /*SYS_CLKOUT1 - NC*/\
+ MUX_VAL(CP(SYS_CLKOUT2),      (IEN  | PTD | DIS | M4)) /*SYS_CLKOUT2 - NC*/\
+ /*JTAG*/\
+ MUX_VAL(CP(JTAG_nTRST),       (IEN  | PTD | DIS | M0)) /*JTAG_nTRST*/\
+ MUX_VAL(CP(JTAG_TCK),         (IEN  | PTD | DIS | M0)) /*JTAG_TCK*/\
+ MUX_VAL(CP(JTAG_TMS),         (IEN  | PTD | DIS | M0)) /*JTAG_TMS*/\
+ MUX_VAL(CP(JTAG_TDI),         (IEN  | PTD | DIS | M0)) /*JTAG_TDI*/\
+ MUX_VAL(CP(JTAG_EMU0),                (IEN  | PTD | DIS | M0)) /*JTAG_EMU0*/\
+ MUX_VAL(CP(JTAG_EMU1),                (IEN  | PTD | DIS | M0)) /*JTAG_EMU1*/\
+ /*Die to Die stuff*/\
+ MUX_VAL(CP(D2D_MCAD1),                (IEN  | PTD | EN  | M0)) /*d2d_mcad1*/\
+ MUX_VAL(CP(D2D_MCAD2),                (IEN  | PTD | EN  | M0)) /*d2d_mcad2*/\
+ MUX_VAL(CP(D2D_MCAD3),                (IEN  | PTD | EN  | M0)) /*d2d_mcad3*/\
+ MUX_VAL(CP(D2D_MCAD4),                (IEN  | PTD | EN  | M0)) /*d2d_mcad4*/\
+ MUX_VAL(CP(D2D_MCAD5),                (IEN  | PTD | EN  | M0)) /*d2d_mcad5*/\
+ MUX_VAL(CP(D2D_MCAD6),                (IEN  | PTD | EN  | M0)) /*d2d_mcad6*/\
+ MUX_VAL(CP(D2D_MCAD7),                (IEN  | PTD | EN  | M0)) /*d2d_mcad7*/\
+ MUX_VAL(CP(D2D_MCAD8),                (IEN  | PTD | EN  | M0)) /*d2d_mcad8*/\
+ MUX_VAL(CP(D2D_MCAD9),                (IEN  | PTD | EN  | M0)) /*d2d_mcad9*/\
+ MUX_VAL(CP(D2D_MCAD10),       (IEN  | PTD | EN  | M0)) /*d2d_mcad10*/\
+ MUX_VAL(CP(D2D_MCAD11),       (IEN  | PTD | EN  | M0)) /*d2d_mcad11*/\
+ MUX_VAL(CP(D2D_MCAD12),       (IEN  | PTD | EN  | M0)) /*d2d_mcad12*/\
+ MUX_VAL(CP(D2D_MCAD13),       (IEN  | PTD | EN  | M0)) /*d2d_mcad13*/\
+ MUX_VAL(CP(D2D_MCAD14),       (IEN  | PTD | EN  | M0)) /*d2d_mcad14*/\
+ MUX_VAL(CP(D2D_MCAD15),       (IEN  | PTD | EN  | M0)) /*d2d_mcad15*/\
+ MUX_VAL(CP(D2D_MCAD16),       (IEN  | PTD | EN  | M0)) /*d2d_mcad16*/\
+ MUX_VAL(CP(D2D_MCAD17),       (IEN  | PTD | EN  | M0)) /*d2d_mcad17*/\
+ MUX_VAL(CP(D2D_MCAD18),       (IEN  | PTD | EN  | M0)) /*d2d_mcad18*/\
+ MUX_VAL(CP(D2D_MCAD19),       (IEN  | PTD | EN  | M0)) /*d2d_mcad19*/\
+ MUX_VAL(CP(D2D_MCAD20),       (IEN  | PTD | EN  | M0)) /*d2d_mcad20*/\
+ MUX_VAL(CP(D2D_MCAD21),       (IEN  | PTD | EN  | M0)) /*d2d_mcad21*/\
+ MUX_VAL(CP(D2D_MCAD22),       (IEN  | PTD | EN  | M0)) /*d2d_mcad22*/\
+ MUX_VAL(CP(D2D_MCAD23),       (IEN  | PTD | EN  | M0)) /*d2d_mcad23*/\
+ MUX_VAL(CP(D2D_MCAD24),       (IEN  | PTD | EN  | M0)) /*d2d_mcad24*/\
+ MUX_VAL(CP(D2D_MCAD25),       (IEN  | PTD | EN  | M0)) /*d2d_mcad25*/\
+ MUX_VAL(CP(D2D_MCAD26),       (IEN  | PTD | EN  | M0)) /*d2d_mcad26*/\
+ MUX_VAL(CP(D2D_MCAD27),       (IEN  | PTD | EN  | M0)) /*d2d_mcad27*/\
+ MUX_VAL(CP(D2D_MCAD28),       (IEN  | PTD | EN  | M0)) /*d2d_mcad28*/\
+ MUX_VAL(CP(D2D_MCAD29),       (IEN  | PTD | EN  | M0)) /*d2d_mcad29*/\
+ MUX_VAL(CP(D2D_MCAD30),       (IEN  | PTD | EN  | M0)) /*d2d_mcad30*/\
+ MUX_VAL(CP(D2D_MCAD31),       (IEN  | PTD | EN  | M0)) /*d2d_mcad31*/\
+ MUX_VAL(CP(D2D_MCAD32),       (IEN  | PTD | EN  | M0)) /*d2d_mcad32*/\
+ MUX_VAL(CP(D2D_MCAD33),       (IEN  | PTD | EN  | M0)) /*d2d_mcad33*/\
+ MUX_VAL(CP(D2D_MCAD34),       (IEN  | PTD | EN  | M0)) /*d2d_mcad34*/\
+ MUX_VAL(CP(D2D_MCAD35),       (IEN  | PTD | EN  | M0)) /*d2d_mcad35*/\
+ MUX_VAL(CP(D2D_MCAD36),       (IEN  | PTD | EN  | M0)) /*d2d_mcad36*/\
+ MUX_VAL(CP(D2D_CLK26MI),      (IEN  | PTD | DIS | M0)) /*d2d_clk26mi*/\
+ MUX_VAL(CP(D2D_NRESPWRON),    (IEN  | PTD | EN  | M0)) /*d2d_nrespwron*/\
+ MUX_VAL(CP(D2D_NRESWARM),     (IEN  | PTU | EN  | M0)) /*d2d_nreswarm*/\
+ MUX_VAL(CP(D2D_ARM9NIRQ),     (IEN  | PTD | DIS | M0)) /*d2d_arm9nirq*/\
+ MUX_VAL(CP(D2D_UMA2P6FIQ),    (IEN  | PTD | DIS | M0)) /*d2d_uma2p6fiq*/\
+ MUX_VAL(CP(D2D_SPINT),                (IEN  | PTD | EN  | M0)) /*d2d_spint*/\
+ MUX_VAL(CP(D2D_FRINT),                (IEN  | PTD | EN  | M0)) /*d2d_frint*/\
+ MUX_VAL(CP(D2D_DMAREQ0),      (IEN  | PTD | DIS | M0)) /*d2d_dmareq0*/\
+ MUX_VAL(CP(D2D_DMAREQ1),      (IEN  | PTD | DIS | M0)) /*d2d_dmareq1*/\
+ MUX_VAL(CP(D2D_DMAREQ2),      (IEN  | PTD | DIS | M0)) /*d2d_dmareq2*/\
+ MUX_VAL(CP(D2D_DMAREQ3),      (IEN  | PTD | DIS | M0)) /*d2d_dmareq3*/\
+ MUX_VAL(CP(D2D_N3GTRST),      (IEN  | PTD | DIS | M0)) /*d2d_n3gtrst*/\
+ MUX_VAL(CP(D2D_N3GTDI),       (IEN  | PTD | DIS | M0)) /*d2d_n3gtdi*/\
+ MUX_VAL(CP(D2D_N3GTDO),       (IEN  | PTD | DIS | M0)) /*d2d_n3gtdo*/\
+ MUX_VAL(CP(D2D_N3GTMS),       (IEN  | PTD | DIS | M0)) /*d2d_n3gtms*/\
+ MUX_VAL(CP(D2D_N3GTCK),       (IEN  | PTD | DIS | M0)) /*d2d_n3gtck*/\
+ MUX_VAL(CP(D2D_N3GRTCK),      (IEN  | PTD | DIS | M0)) /*d2d_n3grtck*/\
+ MUX_VAL(CP(D2D_MSTDBY),       (IEN  | PTU | EN  | M0)) /*d2d_mstdby*/\
+ MUX_VAL(CP(D2D_SWAKEUP),      (IEN  | PTD | EN  | M0)) /*d2d_swakeup*/\
+ MUX_VAL(CP(D2D_IDLEREQ),      (IEN  | PTD | DIS | M0)) /*d2d_idlereq*/\
+ MUX_VAL(CP(D2D_IDLEACK),      (IEN  | PTU | EN  | M0)) /*d2d_idleack*/\
+ MUX_VAL(CP(D2D_MWRITE),       (IEN  | PTD | DIS | M0)) /*d2d_mwrite*/\
+ MUX_VAL(CP(D2D_SWRITE),       (IEN  | PTD | DIS | M0)) /*d2d_swrite*/\
+ MUX_VAL(CP(D2D_MREAD),                (IEN  | PTD | DIS | M0)) /*d2d_mread*/\
+ MUX_VAL(CP(D2D_SREAD),                (IEN  | PTD | DIS | M0)) /*d2d_sread*/\
+ MUX_VAL(CP(D2D_MBUSFLAG),     (IEN  | PTD | DIS | M0)) /*d2d_mbusflag*/\
+ MUX_VAL(CP(D2D_SBUSFLAG),     (IEN  | PTD | DIS | M0)) /*d2d_sbusflag*/\
+ MUX_VAL(CP(SDRC_CKE0),                (IDIS | PTU | EN  | M0)) /*sdrc_cke0*/\
+ MUX_VAL(CP(SDRC_CKE1),                (IDIS | PTD | DIS | M7)) /*sdrc_cke1*/
+
+#endif

diff --git a/board/omap3/pandora/u-boot.lds b/board/omap3/pandora/u-boot.lds
new file mode 100644 (file)
index 0000000..69d8ac9
--- /dev/null
+++ b/board/omap3/pandora/u-boot.lds
@@ -0,0 +1,63 @@
+/*
+ * January 2004 - Changed to support H4 device
+ * Copyright (c) 2004 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+       . = 0x00000000;
+
+       . = ALIGN(4);
+       .text   :
+       {
+               cpu/arm_cortexa8/start.o        (.text)
+               *(.text)
+       }
+
+       . = ALIGN(4);
+       .rodata : { *(.rodata) }
+
+       .ARM.extab      : { *(.ARM.extab* .gnu.linkonce.armextab.*) }
+       __exidx_start = .;
+       .ARM.exidx      : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
+       __exidx_end = .;
+
+       . = ALIGN(4);
+       .data : { *(.data) }
+
+       . = ALIGN(4);
+       .got : { *(.got) }
+
+       __u_boot_cmd_start = .;
+       .u_boot_cmd : { *(.u_boot_cmd) }
+       __u_boot_cmd_end = .;
+
+       . = ALIGN(4);
+       __bss_start = .;
+       .bss : { *(.bss) }
+       _end = .;
+}

diff --git a/doc/README.omap3 b/doc/README.omap3
index 54f46b7..30dc51e 100644 (file)
--- a/doc/README.omap3
+++ b/doc/README.omap3
@@ -15,6 +15,8 @@ Currently the following boards are supported:
 
 * TI EVM [4]
 
+* OpenPandora Ltd. Pandora [5]
+
 Toolchain
 =========
 
@@ -40,6 +42,11 @@ make
 make omap3_evm_config
 make
 
+* Pandora:
+
+make omap3_pandora_config
+make
+
 Custom commands
 ===============
 
@@ -66,7 +73,7 @@ help
 Acknowledgements
 ================
 
-OMAP3 U-Boot is based on U-Boot tar ball [5] for BeagleBoard and EVM done by
+OMAP3 U-Boot is based on U-Boot tar ball [6] for BeagleBoard and EVM done by
 several TI employees.
 
 Links
@@ -89,6 +96,10 @@ http://www.gumstix.net/Overo/
 
 http://focus.ti.com/docs/toolsw/folders/print/tmdxevm3503.html
 
-[5] TI OMAP3 U-Boot:
+[5] OpenPandora Ltd. Pandora:
+
+http://openpandora.org/
+
+[6] TI OMAP3 U-Boot:
 
 http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gz

diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h
new file mode 100644 (file)
index 0000000..00c0374
--- /dev/null
+++ b/include/configs/omap3_pandora.h
@@ -0,0 +1,320 @@
+/*
+ * (C) Copyright 2008
+ * Grazvydas Ignotas <notasas@gmail.com>
+ *
+ * Configuration settings for the OMAP3 Pandora.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+#include <asm/sizes.h>
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_ARMCORTEXA8     1       /* This is an ARM V7 CPU core */
+#define CONFIG_OMAP            1       /* in a TI OMAP core */
+#define CONFIG_OMAP34XX                1       /* which is a 34XX */
+#define CONFIG_OMAP3430                1       /* which is in a 3430 */
+#define CONFIG_OMAP3_PANDORA   1       /* working with pandora */
+
+#include <asm/arch/cpu.h>      /* get chip and board defs */
+#include <asm/arch/omap3.h>
+
+/* Clock Defines */
+#define V_OSCK                 26000000        /* Clock output from T2 */
+#define V_SCLK                 (V_OSCK >> 1)
+
+#undef CONFIG_USE_IRQ          /* no support for IRQs */
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_CMDLINE_TAG             1       /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS       1
+#define CONFIG_INITRD_TAG              1
+#define CONFIG_REVISION_TAG            1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_ENV_SIZE                        SZ_128K /* Total Size Environment */
+                                               /* Sector */
+#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + SZ_128K)
+#define CONFIG_SYS_GBL_DATA_SIZE       128     /* bytes reserved for */
+                                               /* initial data */
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * NS16550 Configuration
+ */
+#define V_NS16550_CLK                  48000000        /* 48MHz (APLL96/2) */
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    (-4)
+#define CONFIG_SYS_NS16550_CLK         V_NS16550_CLK
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_CONS_INDEX              3
+#define CONFIG_SYS_NS16550_COM3                OMAP34XX_UART3
+#define CONFIG_SERIAL3                 3
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE                        115200
+#define CONFIG_SYS_BAUDRATE_TABLE      {4800, 9600, 19200, 38400, 57600, \
+                                       115200}
+#define CONFIG_MMC                     1
+#define CONFIG_OMAP3_MMC               1
+#define CONFIG_DOS_PARTITION           1
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_EXT2                /* EXT2 Support                 */
+#define CONFIG_CMD_FAT         /* FAT support                  */
+#define CONFIG_CMD_JFFS2       /* JFFS2 Support                */
+
+#define CONFIG_CMD_I2C         /* I2C serial bus support       */
+#define CONFIG_CMD_MMC         /* MMC support                  */
+#define CONFIG_CMD_NAND                /* NAND support                 */
+
+#undef CONFIG_CMD_FLASH                /* flinfo, erase, protect       */
+#undef CONFIG_CMD_FPGA         /* FPGA configuration Support   */
+#undef CONFIG_CMD_IMI          /* iminfo                       */
+#undef CONFIG_CMD_IMLS         /* List all found images        */
+#undef CONFIG_CMD_NET          /* bootp, tftpboot, rarpboot    */
+#undef CONFIG_CMD_NFS          /* NFS support                  */
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_SYS_I2C_SPEED           100000
+#define CONFIG_SYS_I2C_SLAVE           1
+#define CONFIG_SYS_I2C_BUS             0
+#define CONFIG_SYS_I2C_BUS_SELECT      1
+#define CONFIG_DRIVER_OMAP34XX_I2C     1
+
+/*
+ * Board NAND Info.
+ */
+#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_SYS_NAND_ADDR           NAND_BASE       /* physical address */
+                                                       /* to access nand */
+#define CONFIG_SYS_NAND_BASE           NAND_BASE       /* physical address */
+                                                       /* to access nand */
+                                                       /* at CS0 */
+#define GPMC_NAND_ECC_LP_x16_LAYOUT    1
+
+#define CONFIG_SYS_MAX_NAND_DEVICE     1       /* Max number of NAND */
+                                               /* devices */
+#define SECTORSIZE                     512
+
+#define NAND_ALLOW_ERASE_ALL
+#define ADDR_COLUMN                    1
+#define ADDR_PAGE                      2
+#define ADDR_COLUMN_PAGE               3
+
+#define NAND_ChipID_UNKNOWN            0x00
+#define NAND_MAX_FLOORS                        1
+#define NAND_MAX_CHIPS                 1
+#define NAND_NO_RB                     1
+#define CONFIG_SYS_NAND_WP
+
+#define CONFIG_JFFS2_NAND
+/* nand device jffs2 lives on */
+#define CONFIG_JFFS2_DEV               "nand0"
+/* start of jffs2 partition */
+#define CONFIG_JFFS2_PART_OFFSET       0x680000
+#define CONFIG_JFFS2_PART_SIZE         0xf980000       /* size of jffs2 */
+                                                       /* partition */
+
+/* Environment information */
+#define CONFIG_BOOTDELAY               1
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       "loadaddr=0x82000000\0" \
+       "console=ttyS0,115200n8\0" \
+       "videospec=omapfb:vram:2M,vram:4M\0" \
+       "mmcargs=setenv bootargs console=${console} " \
+               "video=${videospec} " \
+               "root=/dev/mmcblk0p2 rw " \
+               "rootfstype=ext3 rootwait\0" \
+       "nandargs=setenv bootargs console=${console} " \
+               "video=${videospec} " \
+               "root=/dev/mtdblock4 rw " \
+               "rootfstype=jffs2\0" \
+       "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
+       "bootscript=echo Running bootscript from mmc ...; " \
+               "autoscr ${loadaddr}\0" \
+       "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
+       "mmcboot=echo Booting from mmc ...; " \
+               "run mmcargs; " \
+               "bootm ${loadaddr}\0" \
+       "nandboot=echo Booting from nand ...; " \
+               "run nandargs; " \
+               "nand read ${loadaddr} 280000 400000; " \
+               "bootm ${loadaddr}\0" \
+
+#define CONFIG_BOOTCOMMAND \
+       "if mmcinit; then " \
+               "if run loadbootscript; then " \
+                       "run bootscript; " \
+               "else " \
+                       "if run loaduimage; then " \
+                               "run mmcboot; " \
+                       "else run nandboot; " \
+                       "fi; " \
+               "fi; " \
+       "else run nandboot; fi"
+
+#define CONFIG_AUTO_COMPLETE   1
+/*
+ * Miscellaneous configurable options
+ */
+#define V_PROMPT               "Pandora # "
+
+#define CONFIG_SYS_LONGHELP            /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
+#define CONFIG_SYS_PROMPT              V_PROMPT
+#define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
+                                       sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS             16      /* max number of command */
+                                               /* args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START       (OMAP34XX_SDRC_CS0)
+#define CONFIG_SYS_MEMTEST_END         (OMAP34XX_SDRC_CS0 + \
+                                       0x01F00000) /* 31MB */
+
+#undef CONFIG_SYS_CLKS_IN_HZ           /* everything, incl board info, */
+                                       /* in Hz */
+
+#define CONFIG_SYS_LOAD_ADDR           (OMAP34XX_SDRC_CS0) /* default load */
+                                                               /* address */
+
+/*
+ * 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by
+ * 32KHz clk, or from external sig. This rate is divided by a local divisor.
+ */
+#define V_PVT                          7
+
+#define CONFIG_SYS_TIMERBASE           (OMAP34XX_GPT2)
+#define CONFIG_SYS_PVT                 V_PVT   /* 2^(pvt+1) */
+#define CONFIG_SYS_HZ                  ((V_SCLK) / (2 << CONFIG_SYS_PVT))
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE       SZ_128K /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ   SZ_4K   /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ   SZ_4K   /* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS   2       /* CS1 may or may not be populated */
+#define PHYS_SDRAM_1           OMAP34XX_SDRC_CS0
+#define PHYS_SDRAM_1_SIZE      SZ_32M  /* at least 32 meg */
+#define PHYS_SDRAM_2           OMAP34XX_SDRC_CS1
+
+/* SDRAM Bank Allocation method */
+#define SDRC_R_B_C             1
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+
+/* **** PISMO SUPPORT *** */
+
+/* Configure the PISMO */
+#define PISMO1_NAND_SIZE               GPMC_SIZE_128M
+#define PISMO1_ONEN_SIZE               GPMC_SIZE_128M
+
+#define CONFIG_SYS_MAX_FLASH_SECT      520     /* max number of sectors on */
+                                               /* one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS     2       /* max number of flash banks */
+#define CONFIG_SYS_MONITOR_LEN         SZ_256K /* Reserve 2 sectors */
+
+#define CONFIG_SYS_FLASH_BASE          boot_flash_base
+
+/* Monitor at start of flash */
+#define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_ONENAND_BASE                ONENAND_MAP
+
+#define CONFIG_ENV_IS_IN_NAND          1
+#define ONENAND_ENV_OFFSET             0x240000 /* environment starts here */
+#define SMNAND_ENV_OFFSET              0x240000 /* environment starts here */
+
+#define CONFIG_SYS_ENV_SECT_SIZE       boot_flash_sec
+#define CONFIG_ENV_OFFSET              boot_flash_off
+#define CONFIG_ENV_ADDR                        SMNAND_ENV_OFFSET
+
+/*-----------------------------------------------------------------------
+ * CFI FLASH driver setup
+ */
+/* timeout values are in ticks */
+#define CONFIG_SYS_FLASH_ERASE_TOUT    (100 * CONFIG_SYS_HZ)
+#define CONFIG_SYS_FLASH_WRITE_TOUT    (100 * CONFIG_SYS_HZ)
+
+/* Flash banks JFFS2 should use */
+#define CONFIG_SYS_MAX_MTD_BANKS       (CONFIG_SYS_MAX_FLASH_BANKS + \
+                                       CONFIG_SYS_MAX_NAND_DEVICE)
+#define CONFIG_SYS_JFFS2_MEM_NAND
+/* use flash_info[2] */
+#define CONFIG_SYS_JFFS2_FIRST_BANK    CONFIG_SYS_MAX_FLASH_BANKS
+#define CONFIG_SYS_JFFS2_NUM_BANKS     1
+
+#ifndef __ASSEMBLY__
+extern gpmc_csx_t *nand_cs_base;
+extern gpmc_t *gpmc_cfg_base;
+extern unsigned int boot_flash_base;
+extern volatile unsigned int boot_flash_env_addr;
+extern unsigned int boot_flash_off;
+extern unsigned int boot_flash_sec;
+extern unsigned int boot_flash_type;
+#endif
+
+
+#define WRITE_NAND_COMMAND(d, adr)\
+                       writel(d, &nand_cs_base->nand_cmd)
+#define WRITE_NAND_ADDRESS(d, adr)\
+                       writel(d, &nand_cs_base->nand_adr)
+#define WRITE_NAND(d, adr) writew(d, &nand_cs_base->nand_dat)
+#define READ_NAND(adr) readl(&nand_cs_base->nand_dat)
+
+/* Other NAND Access APIs */
+#define NAND_WP_OFF() do {readl(&gpmc_cfg_base->config) |= GPMC_CONFIG_WP; } \
+                       while (0)
+#define NAND_WP_ON() do {readl(&gpmc_cfg_base->config) &= ~GPMC_CONFIG_WP; } \
+                       while (0)
+#define NAND_DISABLE_CE(nand)
+#define NAND_ENABLE_CE(nand)
+#define NAND_WAIT_READY(nand)  udelay(10)
+
+#endif                         /* __CONFIG_H */