drivers/usb/host/sl811-hcd.c

   1 /*
   2  * (C) Copyright 2004
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * This code is based on linux driver for sl811hs chip, source at
   6  * drivers/usb/host/sl811.c:
   7  *
   8  * SL811 Host Controller Interface driver for USB.
   9  *
  10  * Copyright (c) 2003/06, Courage Co., Ltd.
  11  *
  12  * Based on:
  13  *      1.uhci.c by Linus Torvalds, Johannes Erdfelt, Randy Dunlap,
  14  *        Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber,
  15  *        Adam Richter, Gregory P. Smith;
  16  *      2.Original SL811 driver (hc_sl811.o) by Pei Liu <pbl@cypress.com>
  17  *      3.Rewrited as sl811.o by Yin Aihua <yinah:couragetech.com.cn>
  18  *
  19  * See file CREDITS for list of people who contributed to this
  20  * project.
  21  *
  22  * This program is free software; you can redistribute it and/or
  23  * modify it under the terms of the GNU General Public License as
  24  * published by the Free Software Foundation; either version 2 of
  25  * the License, or (at your option) any later version.
  26  *
  27  * This program is distributed in the hope that it will be useful,
  28  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  29  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  30  * GNU General Public License for more details.
  31  *
  32  * You should have received a copy of the GNU General Public License
  33  * along with this program; if not, write to the Free Software
  34  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  35  * MA 02111-1307 USA
  36  */
  37
  38 #include <common.h>
  39 #include <mpc8xx.h>
  40 #include <usb.h>
  41 #include "sl811.h"
  42
  43 #include "../../../board/kup/common/kup.h"
  44
  45 #ifdef __PPC__
  46 # define EIEIO          __asm__ volatile ("eieio")
  47 #else
  48 # define EIEIO          /* nothing */
  49 #endif
  50
  51 #define  SL811_ADR (0x50000000)
  52 #define  SL811_DAT (0x50000001)
  53
  54 #define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);})
  55
  56 #ifdef SL811_DEBUG
  57 static int debug = 9;
  58 #endif
  59
  60 static int root_hub_devnum = 0;
  61 static struct usb_port_status rh_status = { 0 };/* root hub port status */
  62
  63 static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe,
  64                                void *data, int buf_len, struct devrequest *cmd);
  65
  66 static void sl811_write (__u8 index, __u8 data)
  67 {
  68         *(volatile unsigned char *) (SL811_ADR) = index;
  69         EIEIO;
  70         *(volatile unsigned char *) (SL811_DAT) = data;
  71         EIEIO;
  72 }
  73
  74 static __u8 sl811_read (__u8 index)
  75 {
  76         __u8 data;
  77
  78         *(volatile unsigned char *) (SL811_ADR) = index;
  79         EIEIO;
  80         data = *(volatile unsigned char *) (SL811_DAT);
  81         EIEIO;
  82         return (data);
  83 }
  84
  85 /*
  86  * Read consecutive bytes of data from the SL811H/SL11H buffer
  87  */
  88 static void inline sl811_read_buf(__u8 offset, __u8 *buf, __u8 size)
  89 {
  90         *(volatile unsigned char *) (SL811_ADR) = offset;
  91         EIEIO;
  92         while (size--) {
  93                 *buf++ = *(volatile unsigned char *) (SL811_DAT);
  94                 EIEIO;
  95         }
  96 }
  97
  98 /*
  99  * Write consecutive bytes of data to the SL811H/SL11H buffer
 100  */
 101 static void inline sl811_write_buf(__u8 offset, __u8 *buf, __u8 size)
 102 {
 103         *(volatile unsigned char *) (SL811_ADR) = offset;
 104         EIEIO;
 105         while (size--) {
 106                 *(volatile unsigned char *) (SL811_DAT) = *buf++;
 107                 EIEIO;
 108         }
 109 }
 110
 111 int usb_init_kup4x (void)
 112 {
 113         volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 114         volatile memctl8xx_t *memctl = &immap->im_memctl;
 115         int i;
 116         unsigned char tmp;
 117
 118         memctl = &immap->im_memctl;
 119         memctl->memc_or7 = 0xFFFF8726;
 120         memctl->memc_br7 = 0x50000401;  /* start at 0x50000000 */
 121         /* BP 14 low = USB ON */
 122         immap->im_cpm.cp_pbdat &= ~(BP_USB_VCC);
 123         /* PB 14 nomal port */
 124         immap->im_cpm.cp_pbpar &= ~(BP_USB_VCC);
 125         /* output */
 126         immap->im_cpm.cp_pbdir |= (BP_USB_VCC);
 127
 128         puts ("USB:   ");
 129
 130         for (i = 0x10; i < 0xff; i++) {
 131                 sl811_write(i, i);
 132                 tmp = (sl811_read(i));
 133                 if (tmp != i) {
 134                         printf ("SL811 compare error index=0x%02x read=0x%02x\n", i, tmp);
 135                         return (-1);
 136                 }
 137         }
 138         printf ("SL811 ready\n");
 139         return (0);
 140 }
 141
 142 /*
 143  * This function resets SL811HS controller and detects the speed of
 144  * the connecting device
 145  *
 146  * Return: 0 = no device attached; 1 = USB device attached
 147  */
 148 static int sl811_hc_reset(void)
 149 {
 150         int status ;
 151
 152         sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_12M_HI);
 153         sl811_write(SL811_CTRL1, SL811_CTRL1_RESET);
 154
 155         mdelay(20);
 156
 157         /* Disable hardware SOF generation, clear all irq status. */
 158         sl811_write(SL811_CTRL1, 0);
 159         mdelay(2);
 160         sl811_write(SL811_INTRSTS, 0xff);
 161         status = sl811_read(SL811_INTRSTS);
 162
 163         if (status & SL811_INTR_NOTPRESENT) {
 164                 /* Device is not present */
 165                 PDEBUG(0, "Device not present\n");
 166                 rh_status.wPortStatus &= ~(USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE);
 167                 rh_status.wPortChange |= USB_PORT_STAT_C_CONNECTION;
 168                 sl811_write(SL811_INTR, SL811_INTR_INSRMV);
 169                 return 0;
 170         }
 171
 172         /* Send SOF to address 0, endpoint 0. */
 173         sl811_write(SL811_LEN_B, 0);
 174         sl811_write(SL811_PIDEP_B, PIDEP(USB_PID_SOF, 0));
 175         sl811_write(SL811_DEV_B, 0x00);
 176         sl811_write(SL811_SOFLOW, SL811_12M_LOW);
 177
 178         if (status & SL811_INTR_SPEED_FULL) {
 179                 /* full speed device connect directly to root hub */
 180                 PDEBUG (0, "Full speed Device attached\n");
 181
 182                 sl811_write(SL811_CTRL1, SL811_CTRL1_RESET);
 183                 mdelay(20);
 184                 sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_12M_HI);
 185                 sl811_write(SL811_CTRL1, SL811_CTRL1_SOF);
 186
 187                 /* start the SOF or EOP */
 188                 sl811_write(SL811_CTRL_B, SL811_USB_CTRL_ARM);
 189                 rh_status.wPortStatus |= USB_PORT_STAT_CONNECTION;
 190                 rh_status.wPortStatus &= ~USB_PORT_STAT_LOW_SPEED;
 191                 mdelay(2);
 192                 sl811_write(SL811_INTRSTS, 0xff);
 193         } else {
 194                 /* slow speed device connect directly to root-hub */
 195                 PDEBUG(0, "Low speed Device attached\n");
 196
 197                 sl811_write(SL811_CTRL1, SL811_CTRL1_RESET);
 198                 mdelay(20);
 199                 sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_CTL2_DSWAP | SL811_12M_HI);
 200                 sl811_write(SL811_CTRL1, SL811_CTRL1_SPEED_LOW | SL811_CTRL1_SOF);
 201
 202                 /* start the SOF or EOP */
 203                 sl811_write(SL811_CTRL_B, SL811_USB_CTRL_ARM);
 204                 rh_status.wPortStatus |= USB_PORT_STAT_CONNECTION | USB_PORT_STAT_LOW_SPEED;
 205                 mdelay(2);
 206                 sl811_write(SL811_INTRSTS, 0xff);
 207         }
 208
 209         rh_status.wPortChange |= USB_PORT_STAT_C_CONNECTION;
 210         sl811_write(SL811_INTR, /*SL811_INTR_INSRMV*/SL811_INTR_DONE_A);
 211
 212         return 1;
 213 }
 214
 215 int usb_lowlevel_init(void)
 216 {
 217         root_hub_devnum = 0;
 218         sl811_hc_reset();
 219         return 0;
 220 }
 221
 222 int usb_lowlevel_stop(void)
 223 {
 224         sl811_hc_reset();
 225         return 0;
 226 }
 227
 228 static int calc_needed_buswidth(int bytes, int need_preamble)
 229 {
 230         return !need_preamble ? bytes * 8 + 256 : 8 * 8 * bytes + 2048;
 231 }
 232
 233 static int sl811_send_packet(struct usb_device *dev, unsigned long pipe, __u8 *buffer, int len)
 234 {
 235         __u8 ctrl = SL811_USB_CTRL_ARM | SL811_USB_CTRL_ENABLE;
 236         __u16 status = 0;
 237         int err = 0, time_start = get_timer(0);
 238         int need_preamble = !(rh_status.wPortStatus & USB_PORT_STAT_LOW_SPEED) &&
 239                 usb_pipeslow(pipe);
 240
 241         if (len > 239)
 242                 return -1;
 243
 244         if (usb_pipeout(pipe))
 245                 ctrl |= SL811_USB_CTRL_DIR_OUT;
 246         if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)))
 247                 ctrl |= SL811_USB_CTRL_TOGGLE_1;
 248         if (need_preamble)
 249                 ctrl |= SL811_USB_CTRL_PREAMBLE;
 250
 251         sl811_write(SL811_INTRSTS, 0xff);
 252
 253         while (err < 3) {
 254                 sl811_write(SL811_ADDR_A, 0x10);
 255                 sl811_write(SL811_LEN_A, len);
 256                 if (usb_pipeout(pipe) && len)
 257                         sl811_write_buf(0x10, buffer, len);
 258
 259                 if (!(rh_status.wPortStatus & USB_PORT_STAT_LOW_SPEED) &&
 260                     sl811_read(SL811_SOFCNTDIV)*64 < calc_needed_buswidth(len, need_preamble))
 261                         ctrl |= SL811_USB_CTRL_SOF;
 262                 else
 263                         ctrl &= ~SL811_USB_CTRL_SOF;
 264
 265                 sl811_write(SL811_CTRL_A, ctrl);
 266                 while (!(sl811_read(SL811_INTRSTS) & SL811_INTR_DONE_A)) {
 267                         if (5*CONFIG_SYS_HZ < get_timer(time_start)) {
 268                                 printf("USB transmit timed out\n");
 269                                 return -USB_ST_CRC_ERR;
 270                         }
 271                 }
 272
 273                 sl811_write(SL811_INTRSTS, 0xff);
 274                 status = sl811_read(SL811_STS_A);
 275
 276                 if (status & SL811_USB_STS_ACK) {
 277                         int remainder = sl811_read(SL811_CNT_A);
 278                         if (remainder) {
 279                                 PDEBUG(0, "usb transfer remainder = %d\n", remainder);
 280                                 len -= remainder;
 281                         }
 282                         if (usb_pipein(pipe) && len)
 283                                 sl811_read_buf(0x10, buffer, len);
 284                         return len;
 285                 }
 286
 287                 if ((status & SL811_USB_STS_NAK) == SL811_USB_STS_NAK)
 288                         continue;
 289
 290                 PDEBUG(0, "usb transfer error %#x\n", (int)status);
 291                 err++;
 292         }
 293
 294         err = 0;
 295
 296         if (status & SL811_USB_STS_ERROR)
 297                 err |= USB_ST_BUF_ERR;
 298         if (status & SL811_USB_STS_TIMEOUT)
 299                 err |= USB_ST_CRC_ERR;
 300         if (status & SL811_USB_STS_STALL)
 301                 err |= USB_ST_STALLED;
 302
 303         return -err;
 304 }
 305
 306 int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 307                     int len)
 308 {
 309         int dir_out = usb_pipeout(pipe);
 310         int ep = usb_pipeendpoint(pipe);
 311         int max = usb_maxpacket(dev, pipe);
 312         int done = 0;
 313
 314         PDEBUG(7, "dev = %ld pipe = %ld buf = %p size = %d dir_out = %d\n",
 315                usb_pipedevice(pipe), usb_pipeendpoint(pipe), buffer, len, dir_out);
 316
 317         dev->status = 0;
 318
 319         sl811_write(SL811_DEV_A, usb_pipedevice(pipe));
 320         sl811_write(SL811_PIDEP_A, PIDEP(!dir_out ? USB_PID_IN : USB_PID_OUT, ep));
 321         while (done < len) {
 322                 int res = sl811_send_packet(dev, pipe, (__u8*)buffer+done,
 323                                             max > len - done ? len - done : max);
 324                 if (res < 0) {
 325                         dev->status = -res;
 326                         return res;
 327                 }
 328
 329                 if (!dir_out && res < max) /* short packet */
 330                         break;
 331
 332                 done += res;
 333                 usb_dotoggle(dev, ep, dir_out);
 334         }
 335
 336         dev->act_len = done;
 337
 338         return 0;
 339 }
 340
 341 int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 342                        int len,struct devrequest *setup)
 343 {
 344         int done = 0;
 345         int devnum = usb_pipedevice(pipe);
 346         int ep = usb_pipeendpoint(pipe);
 347
 348         dev->status = 0;
 349
 350         if (devnum == root_hub_devnum)
 351                 return sl811_rh_submit_urb(dev, pipe, buffer, len, setup);
 352
 353         PDEBUG(7, "dev = %d pipe = %ld buf = %p size = %d rt = %#x req = %#x bus = %i\n",
 354                devnum, ep, buffer, len, (int)setup->requesttype,
 355                (int)setup->request, sl811_read(SL811_SOFCNTDIV)*64);
 356
 357         sl811_write(SL811_DEV_A, devnum);
 358         sl811_write(SL811_PIDEP_A, PIDEP(USB_PID_SETUP, ep));
 359         /* setup phase */
 360         usb_settoggle(dev, ep, 1, 0);
 361         if (sl811_send_packet(dev, usb_sndctrlpipe(dev, ep),
 362                               (__u8*)setup, sizeof(*setup)) == sizeof(*setup)) {
 363                 int dir_in = usb_pipein(pipe);
 364                 int max = usb_maxpacket(dev, pipe);
 365
 366                 /* data phase */
 367                 sl811_write(SL811_PIDEP_A,
 368                             PIDEP(dir_in ? USB_PID_IN : USB_PID_OUT, ep));
 369                 usb_settoggle(dev, ep, usb_pipeout(pipe), 1);
 370                 while (done < len) {
 371                         int res = sl811_send_packet(dev, pipe, (__u8*)buffer+done,
 372                                                     max > len - done ? len - done : max);
 373                         if (res < 0) {
 374                                 PDEBUG(0, "status data failed!\n");
 375                                 dev->status = -res;
 376                                 return 0;
 377                         }
 378                         done += res;
 379                         usb_dotoggle(dev, ep, usb_pipeout(pipe));
 380                         if (dir_in && res < max) /* short packet */
 381                                 break;
 382                 }
 383
 384                 /* status phase */
 385                 sl811_write(SL811_PIDEP_A,
 386                             PIDEP(!dir_in ? USB_PID_IN : USB_PID_OUT, ep));
 387                 usb_settoggle(dev, ep, !usb_pipeout(pipe), 1);
 388                 if (sl811_send_packet(dev,
 389                                       !dir_in ? usb_rcvctrlpipe(dev, ep) :
 390                                       usb_sndctrlpipe(dev, ep),
 391                                       0, 0) < 0) {
 392                         PDEBUG(0, "status phase failed!\n");
 393                         dev->status = -1;
 394                 }
 395         } else {
 396                 PDEBUG(0, "setup phase failed!\n");
 397                 dev->status = -1;
 398         }
 399
 400         dev->act_len = done;
 401
 402         return done;
 403 }
 404
 405 int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 406                    int len, int interval)
 407 {
 408         PDEBUG(0, "dev = %p pipe = %#lx buf = %p size = %d int = %d\n", dev, pipe,
 409                buffer, len, interval);
 410         return -1;
 411 }
 412
 413 /*
 414  * SL811 Virtual Root Hub
 415  */
 416
 417 /* Device descriptor */
 418 static __u8 sl811_rh_dev_des[] =
 419 {
 420         0x12,       /*  __u8  bLength; */
 421         0x01,       /*  __u8  bDescriptorType; Device */
 422         0x10,       /*  __u16 bcdUSB; v1.1 */
 423         0x01,
 424         0x09,       /*  __u8  bDeviceClass; HUB_CLASSCODE */
 425         0x00,       /*  __u8  bDeviceSubClass; */
 426         0x00,       /*  __u8  bDeviceProtocol; */
 427         0x08,       /*  __u8  bMaxPacketSize0; 8 Bytes */
 428         0x00,       /*  __u16 idVendor; */
 429         0x00,
 430         0x00,       /*  __u16 idProduct; */
 431         0x00,
 432         0x00,       /*  __u16 bcdDevice; */
 433         0x00,
 434         0x00,       /*  __u8  iManufacturer; */
 435         0x02,       /*  __u8  iProduct; */
 436         0x01,       /*  __u8  iSerialNumber; */
 437         0x01        /*  __u8  bNumConfigurations; */
 438 };
 439
 440 /* Configuration descriptor */
 441 static __u8 sl811_rh_config_des[] =
 442 {
 443         0x09,       /*  __u8  bLength; */
 444         0x02,       /*  __u8  bDescriptorType; Configuration */
 445         0x19,       /*  __u16 wTotalLength; */
 446         0x00,
 447         0x01,       /*  __u8  bNumInterfaces; */
 448         0x01,       /*  __u8  bConfigurationValue; */
 449         0x00,       /*  __u8  iConfiguration; */
 450         0x40,       /*  __u8  bmAttributes;
 451                     Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup,
 452                     4..0: resvd */
 453         0x00,       /*  __u8  MaxPower; */
 454
 455         /* interface */
 456         0x09,       /*  __u8  if_bLength; */
 457         0x04,       /*  __u8  if_bDescriptorType; Interface */
 458         0x00,       /*  __u8  if_bInterfaceNumber; */
 459         0x00,       /*  __u8  if_bAlternateSetting; */
 460         0x01,       /*  __u8  if_bNumEndpoints; */
 461         0x09,       /*  __u8  if_bInterfaceClass; HUB_CLASSCODE */
 462         0x00,       /*  __u8  if_bInterfaceSubClass; */
 463         0x00,       /*  __u8  if_bInterfaceProtocol; */
 464         0x00,       /*  __u8  if_iInterface; */
 465
 466         /* endpoint */
 467         0x07,       /*  __u8  ep_bLength; */
 468         0x05,       /*  __u8  ep_bDescriptorType; Endpoint */
 469         0x81,       /*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
 470         0x03,       /*  __u8  ep_bmAttributes; Interrupt */
 471         0x08,       /*  __u16 ep_wMaxPacketSize; */
 472         0x00,
 473         0xff        /*  __u8  ep_bInterval; 255 ms */
 474 };
 475
 476 /* root hub class descriptor*/
 477 static __u8 sl811_rh_hub_des[] =
 478 {
 479         0x09,                   /*  __u8  bLength; */
 480         0x29,                   /*  __u8  bDescriptorType; Hub-descriptor */
 481         0x01,                   /*  __u8  bNbrPorts; */
 482         0x00,                   /* __u16  wHubCharacteristics; */
 483         0x00,
 484         0x50,                   /*  __u8  bPwrOn2pwrGood; 2ms */
 485         0x00,                   /*  __u8  bHubContrCurrent; 0 mA */
 486         0xfc,                   /*  __u8  DeviceRemovable; *** 7 Ports max *** */
 487         0xff                    /*  __u8  PortPwrCtrlMask; *** 7 ports max *** */
 488 };
 489
 490 /*
 491  * helper routine for returning string descriptors in UTF-16LE
 492  * input can actually be ISO-8859-1; ASCII is its 7-bit subset
 493  */
 494 static int ascii2utf (char *s, u8 *utf, int utfmax)
 495 {
 496         int retval;
 497
 498         for (retval = 0; *s && utfmax > 1; utfmax -= 2, retval += 2) {
 499                 *utf++ = *s++;
 500                 *utf++ = 0;
 501         }
 502         return retval;
 503 }
 504
 505 /*
 506  * root_hub_string is used by each host controller's root hub code,
 507  * so that they're identified consistently throughout the system.
 508  */
 509 static int usb_root_hub_string (int id, int serial, char *type, __u8 *data, int len)
 510 {
 511         char buf [30];
 512
 513         /* assert (len > (2 * (sizeof (buf) + 1)));
 514            assert (strlen (type) <= 8);*/
 515
 516         /* language ids */
 517         if (id == 0) {
 518                 *data++ = 4; *data++ = 3;       /* 4 bytes data */
 519                 *data++ = 0; *data++ = 0;       /* some language id */
 520                 return 4;
 521
 522         /* serial number */
 523         } else if (id == 1) {
 524                 sprintf (buf, "%#x", serial);
 525
 526         /* product description */
 527         } else if (id == 2) {
 528                 sprintf (buf, "USB %s Root Hub", type);
 529
 530         /* id 3 == vendor description */
 531
 532         /* unsupported IDs --> "stall" */
 533         } else
 534             return 0;
 535
 536         ascii2utf (buf, data + 2, len - 2);
 537         data [0] = 2 + strlen(buf) * 2;
 538         data [1] = 3;
 539         return data [0];
 540 }
 541
 542 /* helper macro */
 543 #define OK(x)   len = (x); break
 544
 545 /*
 546  * This function handles all USB request to the the virtual root hub
 547  */
 548 static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe,
 549                                void *data, int buf_len, struct devrequest *cmd)
 550 {
 551         __u8 data_buf[16];
 552         __u8 *bufp = data_buf;
 553         int len = 0;
 554         int status = 0;
 555
 556         __u16 bmRType_bReq;
 557         __u16 wValue;
 558         __u16 wIndex;
 559         __u16 wLength;
 560
 561         if (usb_pipeint(pipe)) {
 562                 PDEBUG(0, "interrupt transfer unimplemented!\n");
 563                 return 0;
 564         }
 565
 566         bmRType_bReq  = cmd->requesttype | (cmd->request << 8);
 567         wValue        = le16_to_cpu (cmd->value);
 568         wIndex        = le16_to_cpu (cmd->index);
 569         wLength       = le16_to_cpu (cmd->length);
 570
 571         PDEBUG(5, "submit rh urb, req = %d(%x) val = %#x index = %#x len=%d\n",
 572                bmRType_bReq, bmRType_bReq, wValue, wIndex, wLength);
 573
 574         /* Request Destination:
 575                    without flags: Device,
 576                    USB_RECIP_INTERFACE: interface,
 577                    USB_RECIP_ENDPOINT: endpoint,
 578                    USB_TYPE_CLASS means HUB here,
 579                    USB_RECIP_OTHER | USB_TYPE_CLASS  almost ever means HUB_PORT here
 580         */
 581         switch (bmRType_bReq) {
 582         case RH_GET_STATUS:
 583                 *(__u16 *)bufp = cpu_to_le16(1);
 584                 OK(2);
 585
 586         case RH_GET_STATUS | USB_RECIP_INTERFACE:
 587                 *(__u16 *)bufp = cpu_to_le16(0);
 588                 OK(2);
 589
 590         case RH_GET_STATUS | USB_RECIP_ENDPOINT:
 591                 *(__u16 *)bufp = cpu_to_le16(0);
 592                 OK(2);
 593
 594         case RH_GET_STATUS | USB_TYPE_CLASS:
 595                 *(__u32 *)bufp = cpu_to_le32(0);
 596                 OK(4);
 597
 598         case RH_GET_STATUS | USB_RECIP_OTHER | USB_TYPE_CLASS:
 599                 *(__u32 *)bufp = cpu_to_le32(rh_status.wPortChange<<16 | rh_status.wPortStatus);
 600                 OK(4);
 601
 602         case RH_CLEAR_FEATURE | USB_RECIP_ENDPOINT:
 603                 switch (wValue) {
 604                 case 1:
 605                         OK(0);
 606                 }
 607                 break;
 608
 609         case RH_CLEAR_FEATURE | USB_TYPE_CLASS:
 610                 switch (wValue) {
 611                 case C_HUB_LOCAL_POWER:
 612                         OK(0);
 613
 614                 case C_HUB_OVER_CURRENT:
 615                         OK(0);
 616                 }
 617                 break;
 618
 619         case RH_CLEAR_FEATURE | USB_RECIP_OTHER | USB_TYPE_CLASS:
 620                 switch (wValue) {
 621                 case USB_PORT_FEAT_ENABLE:
 622                         rh_status.wPortStatus &= ~USB_PORT_STAT_ENABLE;
 623                         OK(0);
 624
 625                 case USB_PORT_FEAT_SUSPEND:
 626                         rh_status.wPortStatus &= ~USB_PORT_STAT_SUSPEND;
 627                         OK(0);
 628
 629                 case USB_PORT_FEAT_POWER:
 630                         rh_status.wPortStatus &= ~USB_PORT_STAT_POWER;
 631                         OK(0);
 632
 633                 case USB_PORT_FEAT_C_CONNECTION:
 634                         rh_status.wPortChange &= ~USB_PORT_STAT_C_CONNECTION;
 635                         OK(0);
 636
 637                 case USB_PORT_FEAT_C_ENABLE:
 638                         rh_status.wPortChange &= ~USB_PORT_STAT_C_ENABLE;
 639                         OK(0);
 640
 641                 case USB_PORT_FEAT_C_SUSPEND:
 642                         rh_status.wPortChange &= ~USB_PORT_STAT_C_SUSPEND;
 643                         OK(0);
 644
 645                 case USB_PORT_FEAT_C_OVER_CURRENT:
 646                         rh_status.wPortChange &= ~USB_PORT_STAT_C_OVERCURRENT;
 647                         OK(0);
 648
 649                 case USB_PORT_FEAT_C_RESET:
 650                         rh_status.wPortChange &= ~USB_PORT_STAT_C_RESET;
 651                         OK(0);
 652                 }
 653                 break;
 654
 655         case RH_SET_FEATURE | USB_RECIP_OTHER | USB_TYPE_CLASS:
 656                 switch (wValue) {
 657                 case USB_PORT_FEAT_SUSPEND:
 658                         rh_status.wPortStatus |= USB_PORT_STAT_SUSPEND;
 659                         OK(0);
 660
 661                 case USB_PORT_FEAT_RESET:
 662                         rh_status.wPortStatus |= USB_PORT_STAT_RESET;
 663                         rh_status.wPortChange = 0;
 664                         rh_status.wPortChange |= USB_PORT_STAT_C_RESET;
 665                         rh_status.wPortStatus &= ~USB_PORT_STAT_RESET;
 666                         rh_status.wPortStatus |= USB_PORT_STAT_ENABLE;
 667                         OK(0);
 668
 669                 case USB_PORT_FEAT_POWER:
 670                         rh_status.wPortStatus |= USB_PORT_STAT_POWER;
 671                         OK(0);
 672
 673                 case USB_PORT_FEAT_ENABLE:
 674                         rh_status.wPortStatus |= USB_PORT_STAT_ENABLE;
 675                         OK(0);
 676                 }
 677                 break;
 678
 679         case RH_SET_ADDRESS:
 680                 root_hub_devnum = wValue;
 681                 OK(0);
 682
 683         case RH_GET_DESCRIPTOR:
 684                 switch ((wValue & 0xff00) >> 8) {
 685                 case USB_DT_DEVICE:
 686                         len = sizeof(sl811_rh_dev_des);
 687                         bufp = sl811_rh_dev_des;
 688                         OK(len);
 689
 690                 case USB_DT_CONFIG:
 691                         len = sizeof(sl811_rh_config_des);
 692                         bufp = sl811_rh_config_des;
 693                         OK(len);
 694
 695                 case USB_DT_STRING:
 696                         len = usb_root_hub_string(wValue & 0xff, (int)(long)0,  "SL811HS", data, wLength);
 697                         if (len > 0) {
 698                                 bufp = data;
 699                                 OK(len);
 700                         }
 701
 702                 default:
 703                         status = -32;
 704                 }
 705                 break;
 706
 707         case RH_GET_DESCRIPTOR | USB_TYPE_CLASS:
 708                 len = sizeof(sl811_rh_hub_des);
 709                 bufp = sl811_rh_hub_des;
 710                 OK(len);
 711
 712         case RH_GET_CONFIGURATION:
 713                 bufp[0] = 0x01;
 714                 OK(1);
 715
 716         case RH_SET_CONFIGURATION:
 717                 OK(0);
 718
 719         default:
 720                 PDEBUG(1, "unsupported root hub command\n");
 721                 status = -32;
 722         }
 723
 724         len = min(len, buf_len);
 725         if (data != bufp)
 726                 memcpy(data, bufp, len);
 727
 728         PDEBUG(5, "len = %d, status = %d\n", len, status);
 729
 730         usb_dev->status = status;
 731         usb_dev->act_len = len;
 732
 733         return status == 0 ? len : status;
 734 }