tizen 2.4 release
[kernel/u-boot-tm1.git] / drivers / pci / pci_sh7780.c
1 /*
2  * SH7780 PCI Controller (PCIC) for U-Boot.
3  * (C) Dustin McIntire (dustin@sensoria.com)
4  * (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5  * (C) 2008 Yusuke Goda <goda.yusuke@renesas.com>
6  *
7  * See file CREDITS for list of people who contributed to this
8  * project.
9  *
10  * This program is free software; you can redistribute it and/or
11  * modify it under the terms of the GNU General Public License as
12  * published by the Free Software Foundation; either version 2 of
13  * the License, or (at your option) any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18  * GNU General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23  * MA 02111-1307 USA
24  */
25
26 #include <common.h>
27
28 #include <pci.h>
29 #include <asm/processor.h>
30 #include <asm/pci.h>
31 #include <asm/io.h>
32
33 #define SH7780_VENDOR_ID        0x1912
34 #define SH7780_DEVICE_ID        0x0002
35 #define SH7780_PCICR_PREFIX     0xA5000000
36 #define SH7780_PCICR_PFCS       0x00000800
37 #define SH7780_PCICR_FTO        0x00000400
38 #define SH7780_PCICR_PFE        0x00000200
39 #define SH7780_PCICR_TBS        0x00000100
40 #define SH7780_PCICR_ARBM       0x00000040
41 #define SH7780_PCICR_IOCS       0x00000004
42 #define SH7780_PCICR_PRST       0x00000002
43 #define SH7780_PCICR_CFIN       0x00000001
44
45 #define p4_in(addr)                     (*(vu_long *)addr)
46 #define p4_out(data, addr)      (*(vu_long *)addr) = (data)
47 #define p4_inw(addr)            (*(vu_short *)addr)
48 #define p4_outw(data, addr)     (*(vu_short *)addr) = (data)
49
50 int pci_sh4_read_config_dword(struct pci_controller *hose,
51                                     pci_dev_t dev, int offset, u32 *value)
52 {
53         u32 par_data = 0x80000000 | dev;
54
55         p4_out(par_data | (offset & 0xfc), SH7780_PCIPAR);
56         *value = p4_in(SH7780_PCIPDR);
57
58         return 0;
59 }
60
61 int pci_sh4_write_config_dword(struct pci_controller *hose,
62                                      pci_dev_t dev, int offset, u32 value)
63 {
64         u32 par_data = 0x80000000 | dev;
65
66         p4_out(par_data | (offset & 0xfc), SH7780_PCIPAR);
67         p4_out(value, SH7780_PCIPDR);
68         return 0;
69 }
70
71 int pci_sh7780_init(struct pci_controller *hose)
72 {
73         p4_out(0x01, SH7780_PCIECR);
74
75         if (p4_inw(SH7780_PCIVID) != SH7780_VENDOR_ID
76             && p4_inw(SH7780_PCIDID) != SH7780_DEVICE_ID) {
77                 printf("PCI: Unknown PCI host bridge.\n");
78                 return -1;
79         }
80         printf("PCI: SH7780 PCI host bridge found.\n");
81
82         /* Toggle PCI reset pin */
83         p4_out((SH7780_PCICR_PREFIX | SH7780_PCICR_PRST), SH7780_PCICR);
84         udelay(100000);
85         p4_out(SH7780_PCICR_PREFIX, SH7780_PCICR);
86         p4_outw(0x0047, SH7780_PCICMD);
87
88         p4_out(CONFIG_SH7780_PCI_LSR, SH7780_PCILSR0);
89         p4_out(CONFIG_SH7780_PCI_LAR, SH7780_PCILAR0);
90         p4_out(0x00000000, SH7780_PCILSR1);
91         p4_out(0, SH7780_PCILAR1);
92         p4_out(CONFIG_SH7780_PCI_BAR, SH7780_PCIMBAR0);
93         p4_out(0x00000000, SH7780_PCIMBAR1);
94
95         p4_out(0xFD000000, SH7780_PCIMBR0);
96         p4_out(0x00FC0000, SH7780_PCIMBMR0);
97
98         /* if use Operand Cache then enable PCICSCR Soonp bits. */
99         p4_out(0x08000000, SH7780_PCICSAR0);
100         p4_out(0x0000001B, SH7780_PCICSCR0);    /* Snoop bit :On */
101
102         p4_out((SH7780_PCICR_PREFIX | SH7780_PCICR_CFIN | SH7780_PCICR_ARBM
103               | SH7780_PCICR_FTO | SH7780_PCICR_PFCS | SH7780_PCICR_PFE),
104              SH7780_PCICR);
105
106         pci_sh4_init(hose);
107         return 0;
108 }