tizen 2.4 release
[kernel/u-boot-tm1.git] / board / freescale / p1_p2_rdb / p1_p2_rdb.c
1 /*
2  * Copyright 2009-2010 Freescale Semiconductor, Inc.
3  *
4  * See file CREDITS for list of people who contributed to this
5  * project.
6  *
7  * This program is free software; you can redistribute it and/or
8  * modify it under the terms of the GNU General Public License as
9  * published by the Free Software Foundation; either version 2 of
10  * the License, or (at your option) any later version.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
20  * MA 02111-1307 USA
21  */
22
23 #include <common.h>
24 #include <command.h>
25 #include <asm/processor.h>
26 #include <asm/mmu.h>
27 #include <asm/cache.h>
28 #include <asm/immap_85xx.h>
29 #include <asm/io.h>
30 #include <miiphy.h>
31 #include <libfdt.h>
32 #include <fdt_support.h>
33 #include <tsec.h>
34 #include <vsc7385.h>
35 #include <netdev.h>
36 #include <rtc.h>
37
38 DECLARE_GLOBAL_DATA_PTR;
39
40 #define VSC7385_RST_SET         0x00080000
41 #define SLIC_RST_SET            0x00040000
42 #define SGMII_PHY_RST_SET       0x00020000
43 #define PCIE_RST_SET            0x00010000
44 #define RGMII_PHY_RST_SET       0x02000000
45
46 #define USB_RST_CLR             0x04000000
47
48 #define GPIO_DIR                0x060f0000
49
50 #define BOARD_PERI_RST_SET      VSC7385_RST_SET | SLIC_RST_SET | \
51                                 SGMII_PHY_RST_SET | PCIE_RST_SET | \
52                                 RGMII_PHY_RST_SET
53
54 #define SYSCLK_MASK     0x00200000
55 #define BOARDREV_MASK   0x10100000
56 #define BOARDREV_B      0x10100000
57 #define BOARDREV_C      0x00100000
58 #define BOARDREV_D      0x00000000
59
60 #define SYSCLK_66       66666666
61 #define SYSCLK_50       50000000
62 #define SYSCLK_100      100000000
63
64 unsigned long get_board_sys_clk(ulong dummy)
65 {
66         volatile ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
67         u32 val_gpdat, sysclk_gpio, board_rev_gpio;
68
69         val_gpdat = in_be32(&pgpio->gpdat);
70         sysclk_gpio = val_gpdat & SYSCLK_MASK;
71         board_rev_gpio = val_gpdat & BOARDREV_MASK;
72         if (board_rev_gpio == BOARDREV_C) {
73                 if(sysclk_gpio == 0)
74                         return SYSCLK_66;
75                 else
76                         return SYSCLK_100;
77         } else if (board_rev_gpio == BOARDREV_B) {
78                 if(sysclk_gpio == 0)
79                         return SYSCLK_66;
80                 else
81                         return SYSCLK_50;
82         } else if (board_rev_gpio == BOARDREV_D) {
83                 if(sysclk_gpio == 0)
84                         return SYSCLK_66;
85                 else
86                         return SYSCLK_100;
87         }
88         return 0;
89 }
90
91 #ifdef CONFIG_MMC
92 int board_early_init_f (void)
93 {
94         volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
95
96         setbits_be32(&gur->pmuxcr,
97                         (MPC85xx_PMUXCR_SDHC_CD |
98                          MPC85xx_PMUXCR_SDHC_WP));
99         return 0;
100 }
101 #endif
102
103 int checkboard (void)
104 {
105         u32 val_gpdat, board_rev_gpio;
106         volatile ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
107         char board_rev = 0;
108         struct cpu_type *cpu;
109
110         val_gpdat = in_be32(&pgpio->gpdat);
111         board_rev_gpio = val_gpdat & BOARDREV_MASK;
112         if (board_rev_gpio == BOARDREV_C)
113                 board_rev = 'C';
114         else if (board_rev_gpio == BOARDREV_B)
115                 board_rev = 'B';
116         else if (board_rev_gpio == BOARDREV_D)
117                 board_rev = 'D';
118         else
119                 panic ("Unexpected Board REV %x detected!!\n", board_rev_gpio);
120
121         cpu = gd->cpu;
122         printf ("Board: %sRDB Rev%c\n", cpu->name, board_rev);
123         setbits_be32(&pgpio->gpdir, GPIO_DIR);
124
125 /*
126  * Bringing the following peripherals out of reset via GPIOs
127  * 0 = reset and 1 = out of reset
128  * GPIO12 - Reset to Ethernet Switch
129  * GPIO13 - Reset to SLIC/SLAC devices
130  * GPIO14 - Reset to SGMII_PHY_N
131  * GPIO15 - Reset to PCIe slots
132  * GPIO6  - Reset to RGMII PHY
133  * GPIO5  - Reset to USB3300 devices 1 = reset and 0 = out of reset
134  */
135         clrsetbits_be32(&pgpio->gpdat, USB_RST_CLR, BOARD_PERI_RST_SET);
136
137         return 0;
138 }
139
140 int board_early_init_r(void)
141 {
142         const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
143         const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
144
145         /*
146          * Remap Boot flash region to caching-inhibited
147          * so that flash can be erased properly.
148          */
149
150         /* Flush d-cache and invalidate i-cache of any FLASH data */
151         flush_dcache();
152         invalidate_icache();
153
154         /* invalidate existing TLB entry for flash */
155         disable_tlb(flash_esel);
156
157         set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
158                         MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
159                         0, flash_esel, BOOKE_PAGESZ_16M, 1);
160         rtc_reset();
161         return 0;
162 }
163
164
165 #ifdef CONFIG_TSEC_ENET
166 int board_eth_init(bd_t *bis)
167 {
168         struct tsec_info_struct tsec_info[4];
169         volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
170         int num = 0;
171         char *tmp;
172         u32 pordevsr;
173         unsigned int vscfw_addr;
174
175 #ifdef CONFIG_TSEC1
176         SET_STD_TSEC_INFO(tsec_info[num], 1);
177         num++;
178 #endif
179 #ifdef CONFIG_TSEC2
180         SET_STD_TSEC_INFO(tsec_info[num], 2);
181         num++;
182 #endif
183 #ifdef CONFIG_TSEC3
184         SET_STD_TSEC_INFO(tsec_info[num], 3);
185         pordevsr = in_be32(&gur->pordevsr);
186         if (!(pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
187                 tsec_info[num].flags |= TSEC_SGMII;
188         num++;
189 #endif
190         if (!num) {
191                 printf("No TSECs initialized\n");
192                 return 0;
193         }
194 #ifdef CONFIG_VSC7385_ENET
195 /* If a VSC7385 microcode image is present, then upload it. */
196         if ((tmp = getenv ("vscfw_addr")) != NULL) {
197                 vscfw_addr = simple_strtoul (tmp, NULL, 16);
198                 printf("uploading VSC7385 microcode from %x\n", vscfw_addr);
199                 if (vsc7385_upload_firmware((void *) vscfw_addr,
200                                         CONFIG_VSC7385_IMAGE_SIZE))
201                         puts("Failure uploading VSC7385 microcode.\n");
202         } else
203                 puts("No address specified for VSC7385 microcode.\n");
204 #endif
205
206         tsec_eth_init(bis, tsec_info, num);
207
208         return pci_eth_init(bis);
209 }
210 #endif
211
212 #if defined(CONFIG_OF_BOARD_SETUP)
213 extern void ft_pci_board_setup(void *blob);
214
215 void ft_board_setup(void *blob, bd_t *bd)
216 {
217         phys_addr_t base;
218         phys_size_t size;
219
220         ft_cpu_setup(blob, bd);
221
222         base = getenv_bootm_low();
223         size = getenv_bootm_size();
224
225         ft_pci_board_setup(blob);
226
227         fdt_fixup_memory(blob, (u64)base, (u64)size);
228 }
229 #endif
230
231 #ifdef CONFIG_MP
232 extern void cpu_mp_lmb_reserve(struct lmb *lmb);
233
234 void board_lmb_reserve(struct lmb *lmb)
235 {
236         cpu_mp_lmb_reserve(lmb);
237 }
238 #endif