tizen 2.4 release
[kernel/u-boot-tm1.git] / board / amcc / bamboo / init.S
1 /*
2  * (C) Copyright 2007
3  * Stefan Roese, DENX Software Engineering, sr@denx.de.
4  *
5  *  Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
6  *
7  * See file CREDITS for list of people who contributed to this
8  * project.
9  *
10  * This program is free software; you can redistribute it and/or
11  * modify it under the terms of the GNU General Public License as
12  * published by the Free Software Foundation; either version 2 of
13  * the License, or (at your option) any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18  * GNU General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23  * MA 02111-1307 USA
24  */
25
26 #include <asm-offsets.h>
27 #include <ppc_asm.tmpl>
28 #include <config.h>
29 #include <asm/mmu.h>
30
31 /**************************************************************************
32  * TLB TABLE
33  *
34  * This table is used by the cpu boot code to setup the initial tlb
35  * entries. Rather than make broad assumptions in the cpu source tree,
36  * this table lets each board set things up however they like.
37  *
38  *  Pointer to the table is returned in r1
39  *
40  *************************************************************************/
41         .section .bootpg,"ax"
42         .globl tlbtab
43
44 tlbtab:
45         tlbtab_start
46
47         /*
48          * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
49          * speed up boot process. It is patched after relocation to enable SA_I
50          */
51 #ifndef CONFIG_NAND_SPL
52         tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 0, AC_RWX | SA_G)
53 #else
54         tlbentry(CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 0, AC_RWX | SA_G)
55         tlbentry(CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_RWX | SA_IG)
56 #endif
57
58         /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
59         tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_RWX | SA_G)
60
61         /* PCI base & peripherals */
62         tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, CONFIG_SYS_PCI_BASE, 0, AC_RW | SA_IG)
63
64         tlbentry(CONFIG_SYS_NVRAM_BASE_ADDR, SZ_256M, CONFIG_SYS_NVRAM_BASE_ADDR, 0, AC_RWX | SA_W|SA_I)
65         tlbentry(CONFIG_SYS_NAND_ADDR, SZ_4K, CONFIG_SYS_NAND_ADDR, 0, AC_RWX | SA_W|SA_I)
66
67         /* PCI */
68         tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 0, AC_RW | SA_IG)
69         tlbentry(CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 0, AC_RW | SA_IG)
70         tlbentry(CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 0, AC_RW | SA_IG)
71         tlbentry(CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 0, AC_RW | SA_IG)
72
73         /* USB 2.0 Device */
74         tlbentry(CONFIG_SYS_USB_DEVICE, SZ_1K, CONFIG_SYS_USB_DEVICE, 0, AC_RW | SA_IG)
75
76         tlbtab_end
77
78 #if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
79         /*
80          * For NAND booting the first TLB has to be reconfigured to full size
81          * and with caching disabled after running from RAM!
82          */
83 #define TLB00   TLB0(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M)
84 #define TLB01   TLB1(CONFIG_SYS_BOOT_BASE_ADDR, 0)
85 #define TLB02   TLB2(AC_RWX | SA_IG)
86
87         .globl  reconfig_tlb0
88 reconfig_tlb0:
89         sync
90         isync
91         addi    r4,r0,0x0000            /* TLB entry #0 */
92         lis     r5,TLB00@h
93         ori     r5,r5,TLB00@l
94         tlbwe   r5,r4,0x0000            /* Save it out */
95         lis     r5,TLB01@h
96         ori     r5,r5,TLB01@l
97         tlbwe   r5,r4,0x0001            /* Save it out */
98         lis     r5,TLB02@h
99         ori     r5,r5,TLB02@l
100         tlbwe   r5,r4,0x0002            /* Save it out */
101         sync
102         isync
103         blr
104 #endif