upload tizen1.0 source
[kernel/linux-2.6.36.git] / include / linux / mtd / bbm.h
1 /*
2  *  linux/include/linux/mtd/bbm.h
3  *
4  *  NAND family Bad Block Management (BBM) header file
5  *    - Bad Block Table (BBT) implementation
6  *
7  *  Copyright © 2005 Samsung Electronics
8  *  Kyungmin Park <kyungmin.park@samsung.com>
9  *
10  *  Copyright © 2000-2005
11  *  Thomas Gleixner <tglx@linuxtronix.de>
12  *
13  * This program is free software; you can redistribute it and/or modify
14  * it under the terms of the GNU General Public License as published by
15  * the Free Software Foundation; either version 2 of the License, or
16  * (at your option) any later version.
17  *
18  * This program is distributed in the hope that it will be useful,
19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
21  * GNU General Public License for more details.
22  *
23  * You should have received a copy of the GNU General Public License
24  * along with this program; if not, write to the Free Software
25  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
26  *
27  */
28 #ifndef __LINUX_MTD_BBM_H
29 #define __LINUX_MTD_BBM_H
30
31 /* The maximum number of NAND chips in an array */
32 #define NAND_MAX_CHIPS          8
33
34 /**
35  * struct nand_bbt_descr - bad block table descriptor
36  * @options:    options for this descriptor
37  * @pages:      the page(s) where we find the bbt, used with option BBT_ABSPAGE
38  *              when bbt is searched, then we store the found bbts pages here.
39  *              Its an array and supports up to 8 chips now
40  * @offs:       offset of the pattern in the oob area of the page
41  * @veroffs:    offset of the bbt version counter in the oob are of the page
42  * @version:    version read from the bbt page during scan
43  * @len:        length of the pattern, if 0 no pattern check is performed
44  * @maxblocks:  maximum number of blocks to search for a bbt. This number of
45  *              blocks is reserved at the end of the device where the tables are
46  *              written.
47  * @reserved_block_code: if non-0, this pattern denotes a reserved (rather than
48  *              bad) block in the stored bbt
49  * @pattern:    pattern to identify bad block table or factory marked good /
50  *              bad blocks, can be NULL, if len = 0
51  *
52  * Descriptor for the bad block table marker and the descriptor for the
53  * pattern which identifies good and bad blocks. The assumption is made
54  * that the pattern and the version count are always located in the oob area
55  * of the first block.
56  */
57 struct nand_bbt_descr {
58         int options;
59         int pages[NAND_MAX_CHIPS];
60         int offs;
61         int veroffs;
62         uint8_t version[NAND_MAX_CHIPS];
63         int len;
64         int maxblocks;
65         int reserved_block_code;
66         uint8_t *pattern;
67 };
68
69 /* Options for the bad block table descriptors */
70
71 /* The number of bits used per block in the bbt on the device */
72 #define NAND_BBT_NRBITS_MSK     0x0000000F
73 #define NAND_BBT_1BIT           0x00000001
74 #define NAND_BBT_2BIT           0x00000002
75 #define NAND_BBT_4BIT           0x00000004
76 #define NAND_BBT_8BIT           0x00000008
77 /* The bad block table is in the last good block of the device */
78 #define NAND_BBT_LASTBLOCK      0x00000010
79 /* The bbt is at the given page, else we must scan for the bbt */
80 #define NAND_BBT_ABSPAGE        0x00000020
81 /* The bbt is at the given page, else we must scan for the bbt */
82 #define NAND_BBT_SEARCH         0x00000040
83 /* bbt is stored per chip on multichip devices */
84 #define NAND_BBT_PERCHIP        0x00000080
85 /* bbt has a version counter at offset veroffs */
86 #define NAND_BBT_VERSION        0x00000100
87 /* Create a bbt if none axists */
88 #define NAND_BBT_CREATE         0x00000200
89 /* Search good / bad pattern through all pages of a block */
90 #define NAND_BBT_SCANALLPAGES   0x00000400
91 /* Scan block empty during good / bad block scan */
92 #define NAND_BBT_SCANEMPTY      0x00000800
93 /* Write bbt if neccecary */
94 #define NAND_BBT_WRITE          0x00001000
95 /* Read and write back block contents when writing bbt */
96 #define NAND_BBT_SAVECONTENT    0x00002000
97 /* Search good / bad pattern on the first and the second page */
98 #define NAND_BBT_SCAN2NDPAGE    0x00004000
99 /* Search good / bad pattern on the last page of the eraseblock */
100 #define NAND_BBT_SCANLASTPAGE   0x00008000
101 /* Chip stores bad block marker on BOTH 1st and 6th bytes of OOB */
102 #define NAND_BBT_SCANBYTE1AND6 0x00100000
103 /* The nand_bbt_descr was created dynamicaly and must be freed */
104 #define NAND_BBT_DYNAMICSTRUCT 0x00200000
105
106 /* The maximum number of blocks to scan for a bbt */
107 #define NAND_BBT_SCAN_MAXBLOCKS 4
108
109 /*
110  * Constants for oob configuration
111  */
112 #define NAND_SMALL_BADBLOCK_POS         5
113 #define NAND_LARGE_BADBLOCK_POS         0
114 #define ONENAND_BADBLOCK_POS            0
115
116 /*
117  * Bad block scanning errors
118  */
119 #define ONENAND_BBT_READ_ERROR          1
120 #define ONENAND_BBT_READ_ECC_ERROR      2
121 #define ONENAND_BBT_READ_FATAL_ERROR    4
122
123 /**
124  * struct bbm_info - [GENERIC] Bad Block Table data structure
125  * @bbt_erase_shift:    [INTERN] number of address bits in a bbt entry
126  * @badblockpos:        [INTERN] position of the bad block marker in the oob area
127  * @options:            options for this descriptor
128  * @bbt:                [INTERN] bad block table pointer
129  * @isbad_bbt:          function to determine if a block is bad
130  * @badblock_pattern:   [REPLACEABLE] bad block scan pattern used for
131  *                      initial bad block scan
132  * @priv:               [OPTIONAL] pointer to private bbm date
133  */
134 struct bbm_info {
135         int bbt_erase_shift;
136         int badblockpos;
137         int options;
138
139         uint8_t *bbt;
140
141         int (*isbad_bbt)(struct mtd_info *mtd, loff_t ofs, int allowbbt);
142
143         /* TODO Add more NAND specific fileds */
144         struct nand_bbt_descr *badblock_pattern;
145
146         void *priv;
147 };
148
149 /* OneNAND BBT interface */
150 extern int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd);
151 extern int onenand_default_bbt(struct mtd_info *mtd);
152
153 #endif  /* __LINUX_MTD_BBM_H */