upload tizen1.0 source
[kernel/linux-2.6.36.git] / include / linux / can / netlink.h
1 /*
2  * linux/can/netlink.h
3  *
4  * Definitions for the CAN netlink interface
5  *
6  * Copyright (c) 2009 Wolfgang Grandegger <wg@grandegger.com>
7  *
8  * Send feedback to <socketcan-users@lists.berlios.de>
9  *
10  */
11
12 #ifndef CAN_NETLINK_H
13 #define CAN_NETLINK_H
14
15 #include <linux/types.h>
16
17 /*
18  * CAN bit-timing parameters
19  *
20  * For futher information, please read chapter "8 BIT TIMING
21  * REQUIREMENTS" of the "Bosch CAN Specification version 2.0"
22  * at http://www.semiconductors.bosch.de/pdf/can2spec.pdf.
23  */
24 struct can_bittiming {
25         __u32 bitrate;          /* Bit-rate in bits/second */
26         __u32 sample_point;     /* Sample point in one-tenth of a percent */
27         __u32 tq;               /* Time quanta (TQ) in nanoseconds */
28         __u32 prop_seg;         /* Propagation segment in TQs */
29         __u32 phase_seg1;       /* Phase buffer segment 1 in TQs */
30         __u32 phase_seg2;       /* Phase buffer segment 2 in TQs */
31         __u32 sjw;              /* Synchronisation jump width in TQs */
32         __u32 brp;              /* Bit-rate prescaler */
33 };
34
35 /*
36  * CAN harware-dependent bit-timing constant
37  *
38  * Used for calculating and checking bit-timing parameters
39  */
40 struct can_bittiming_const {
41         char name[16];          /* Name of the CAN controller hardware */
42         __u32 tseg1_min;        /* Time segement 1 = prop_seg + phase_seg1 */
43         __u32 tseg1_max;
44         __u32 tseg2_min;        /* Time segement 2 = phase_seg2 */
45         __u32 tseg2_max;
46         __u32 sjw_max;          /* Synchronisation jump width */
47         __u32 brp_min;          /* Bit-rate prescaler */
48         __u32 brp_max;
49         __u32 brp_inc;
50 };
51
52 /*
53  * CAN clock parameters
54  */
55 struct can_clock {
56         __u32 freq;             /* CAN system clock frequency in Hz */
57 };
58
59 /*
60  * CAN operational and error states
61  */
62 enum can_state {
63         CAN_STATE_ERROR_ACTIVE = 0,     /* RX/TX error count < 96 */
64         CAN_STATE_ERROR_WARNING,        /* RX/TX error count < 128 */
65         CAN_STATE_ERROR_PASSIVE,        /* RX/TX error count < 256 */
66         CAN_STATE_BUS_OFF,              /* RX/TX error count >= 256 */
67         CAN_STATE_STOPPED,              /* Device is stopped */
68         CAN_STATE_SLEEPING,             /* Device is sleeping */
69         CAN_STATE_MAX
70 };
71
72 /*
73  * CAN bus error counters
74  */
75 struct can_berr_counter {
76         __u16 txerr;
77         __u16 rxerr;
78 };
79
80 /*
81  * CAN controller mode
82  */
83 struct can_ctrlmode {
84         __u32 mask;
85         __u32 flags;
86 };
87
88 #define CAN_CTRLMODE_LOOPBACK           0x01    /* Loopback mode */
89 #define CAN_CTRLMODE_LISTENONLY         0x02    /* Listen-only mode */
90 #define CAN_CTRLMODE_3_SAMPLES          0x04    /* Triple sampling mode */
91 #define CAN_CTRLMODE_ONE_SHOT           0x08    /* One-Shot mode */
92 #define CAN_CTRLMODE_BERR_REPORTING     0x10    /* Bus-error reporting */
93
94 /*
95  * CAN device statistics
96  */
97 struct can_device_stats {
98         __u32 bus_error;        /* Bus errors */
99         __u32 error_warning;    /* Changes to error warning state */
100         __u32 error_passive;    /* Changes to error passive state */
101         __u32 bus_off;          /* Changes to bus off state */
102         __u32 arbitration_lost; /* Arbitration lost errors */
103         __u32 restarts;         /* CAN controller re-starts */
104 };
105
106 /*
107  * CAN netlink interface
108  */
109 enum {
110         IFLA_CAN_UNSPEC,
111         IFLA_CAN_BITTIMING,
112         IFLA_CAN_BITTIMING_CONST,
113         IFLA_CAN_CLOCK,
114         IFLA_CAN_STATE,
115         IFLA_CAN_CTRLMODE,
116         IFLA_CAN_RESTART_MS,
117         IFLA_CAN_RESTART,
118         IFLA_CAN_BERR_COUNTER,
119         __IFLA_CAN_MAX
120 };
121
122 #define IFLA_CAN_MAX    (__IFLA_CAN_MAX - 1)
123
124 #endif /* CAN_NETLINK_H */