upload tizen1.0 source
[kernel/linux-2.6.36.git] / drivers / acpi / proc.c
1 #include <linux/proc_fs.h>
2 #include <linux/seq_file.h>
3 #include <linux/suspend.h>
4 #include <linux/bcd.h>
5 #include <asm/uaccess.h>
6
7 #include <acpi/acpi_bus.h>
8 #include <acpi/acpi_drivers.h>
9
10 #ifdef CONFIG_X86
11 #include <linux/mc146818rtc.h>
12 #endif
13
14 #include "sleep.h"
15
16 #define _COMPONENT              ACPI_SYSTEM_COMPONENT
17
18 /*
19  * this file provides support for:
20  * /proc/acpi/alarm
21  * /proc/acpi/wakeup
22  */
23
24 ACPI_MODULE_NAME("sleep")
25
26 #if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || !defined(CONFIG_X86)
27 /* use /sys/class/rtc/rtcX/wakealarm instead; it's not ACPI-specific */
28 #else
29 #define HAVE_ACPI_LEGACY_ALARM
30 #endif
31
32 #ifdef  HAVE_ACPI_LEGACY_ALARM
33
34 static u32 cmos_bcd_read(int offset, int rtc_control);
35
36 static int acpi_system_alarm_seq_show(struct seq_file *seq, void *offset)
37 {
38         u32 sec, min, hr;
39         u32 day, mo, yr, cent = 0;
40         u32 today = 0;
41         unsigned char rtc_control = 0;
42         unsigned long flags;
43
44         spin_lock_irqsave(&rtc_lock, flags);
45
46         rtc_control = CMOS_READ(RTC_CONTROL);
47         sec = cmos_bcd_read(RTC_SECONDS_ALARM, rtc_control);
48         min = cmos_bcd_read(RTC_MINUTES_ALARM, rtc_control);
49         hr = cmos_bcd_read(RTC_HOURS_ALARM, rtc_control);
50
51         /* If we ever get an FACP with proper values... */
52         if (acpi_gbl_FADT.day_alarm) {
53                 /* ACPI spec: only low 6 its should be cared */
54                 day = CMOS_READ(acpi_gbl_FADT.day_alarm) & 0x3F;
55                 if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
56                         day = bcd2bin(day);
57         } else
58                 day = cmos_bcd_read(RTC_DAY_OF_MONTH, rtc_control);
59         if (acpi_gbl_FADT.month_alarm)
60                 mo = cmos_bcd_read(acpi_gbl_FADT.month_alarm, rtc_control);
61         else {
62                 mo = cmos_bcd_read(RTC_MONTH, rtc_control);
63                 today = cmos_bcd_read(RTC_DAY_OF_MONTH, rtc_control);
64         }
65         if (acpi_gbl_FADT.century)
66                 cent = cmos_bcd_read(acpi_gbl_FADT.century, rtc_control);
67
68         yr = cmos_bcd_read(RTC_YEAR, rtc_control);
69
70         spin_unlock_irqrestore(&rtc_lock, flags);
71
72         /* we're trusting the FADT (see above) */
73         if (!acpi_gbl_FADT.century)
74                 /* If we're not trusting the FADT, we should at least make it
75                  * right for _this_ century... ehm, what is _this_ century?
76                  *
77                  * TBD:
78                  *  ASAP: find piece of code in the kernel, e.g. star tracker driver,
79                  *        which we can trust to determine the century correctly. Atom
80                  *        watch driver would be nice, too...
81                  *
82                  *  if that has not happened, change for first release in 2050:
83                  *        if (yr<50)
84                  *                yr += 2100;
85                  *        else
86                  *                yr += 2000;   // current line of code
87                  *
88                  *  if that has not happened either, please do on 2099/12/31:23:59:59
89                  *        s/2000/2100
90                  *
91                  */
92                 yr += 2000;
93         else
94                 yr += cent * 100;
95
96         /*
97          * Show correct dates for alarms up to a month into the future.
98          * This solves issues for nearly all situations with the common
99          * 30-day alarm clocks in PC hardware.
100          */
101         if (day < today) {
102                 if (mo < 12) {
103                         mo += 1;
104                 } else {
105                         mo = 1;
106                         yr += 1;
107                 }
108         }
109
110         seq_printf(seq, "%4.4u-", yr);
111         (mo > 12) ? seq_puts(seq, "**-") : seq_printf(seq, "%2.2u-", mo);
112         (day > 31) ? seq_puts(seq, "** ") : seq_printf(seq, "%2.2u ", day);
113         (hr > 23) ? seq_puts(seq, "**:") : seq_printf(seq, "%2.2u:", hr);
114         (min > 59) ? seq_puts(seq, "**:") : seq_printf(seq, "%2.2u:", min);
115         (sec > 59) ? seq_puts(seq, "**\n") : seq_printf(seq, "%2.2u\n", sec);
116
117         return 0;
118 }
119
120 static int acpi_system_alarm_open_fs(struct inode *inode, struct file *file)
121 {
122         return single_open(file, acpi_system_alarm_seq_show, PDE(inode)->data);
123 }
124
125 static int get_date_field(char **p, u32 * value)
126 {
127         char *next = NULL;
128         char *string_end = NULL;
129         int result = -EINVAL;
130
131         /*
132          * Try to find delimeter, only to insert null.  The end of the
133          * string won't have one, but is still valid.
134          */
135         if (*p == NULL)
136                 return result;
137
138         next = strpbrk(*p, "- :");
139         if (next)
140                 *next++ = '\0';
141
142         *value = simple_strtoul(*p, &string_end, 10);
143
144         /* Signal success if we got a good digit */
145         if (string_end != *p)
146                 result = 0;
147
148         if (next)
149                 *p = next;
150         else
151                 *p = NULL;
152
153         return result;
154 }
155
156 /* Read a possibly BCD register, always return binary */
157 static u32 cmos_bcd_read(int offset, int rtc_control)
158 {
159         u32 val = CMOS_READ(offset);
160         if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
161                 val = bcd2bin(val);
162         return val;
163 }
164
165 /* Write binary value into possibly BCD register */
166 static void cmos_bcd_write(u32 val, int offset, int rtc_control)
167 {
168         if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
169                 val = bin2bcd(val);
170         CMOS_WRITE(val, offset);
171 }
172
173 static ssize_t
174 acpi_system_write_alarm(struct file *file,
175                         const char __user * buffer, size_t count, loff_t * ppos)
176 {
177         int result = 0;
178         char alarm_string[30] = { '\0' };
179         char *p = alarm_string;
180         u32 sec, min, hr, day, mo, yr;
181         int adjust = 0;
182         unsigned char rtc_control = 0;
183
184         if (count > sizeof(alarm_string) - 1)
185                 return -EINVAL;
186
187         if (copy_from_user(alarm_string, buffer, count))
188                 return -EFAULT;
189
190         alarm_string[count] = '\0';
191
192         /* check for time adjustment */
193         if (alarm_string[0] == '+') {
194                 p++;
195                 adjust = 1;
196         }
197
198         if ((result = get_date_field(&p, &yr)))
199                 goto end;
200         if ((result = get_date_field(&p, &mo)))
201                 goto end;
202         if ((result = get_date_field(&p, &day)))
203                 goto end;
204         if ((result = get_date_field(&p, &hr)))
205                 goto end;
206         if ((result = get_date_field(&p, &min)))
207                 goto end;
208         if ((result = get_date_field(&p, &sec)))
209                 goto end;
210
211         spin_lock_irq(&rtc_lock);
212
213         rtc_control = CMOS_READ(RTC_CONTROL);
214
215         if (adjust) {
216                 yr += cmos_bcd_read(RTC_YEAR, rtc_control);
217                 mo += cmos_bcd_read(RTC_MONTH, rtc_control);
218                 day += cmos_bcd_read(RTC_DAY_OF_MONTH, rtc_control);
219                 hr += cmos_bcd_read(RTC_HOURS, rtc_control);
220                 min += cmos_bcd_read(RTC_MINUTES, rtc_control);
221                 sec += cmos_bcd_read(RTC_SECONDS, rtc_control);
222         }
223
224         spin_unlock_irq(&rtc_lock);
225
226         if (sec > 59) {
227                 min += sec/60;
228                 sec = sec%60;
229         }
230         if (min > 59) {
231                 hr += min/60;
232                 min = min%60;
233         }
234         if (hr > 23) {
235                 day += hr/24;
236                 hr = hr%24;
237         }
238         if (day > 31) {
239                 mo += day/32;
240                 day = day%32;
241         }
242         if (mo > 12) {
243                 yr += mo/13;
244                 mo = mo%13;
245         }
246
247         spin_lock_irq(&rtc_lock);
248         /*
249          * Disable alarm interrupt before setting alarm timer or else
250          * when ACPI_EVENT_RTC is enabled, a spurious ACPI interrupt occurs
251          */
252         rtc_control &= ~RTC_AIE;
253         CMOS_WRITE(rtc_control, RTC_CONTROL);
254         CMOS_READ(RTC_INTR_FLAGS);
255
256         /* write the fields the rtc knows about */
257         cmos_bcd_write(hr, RTC_HOURS_ALARM, rtc_control);
258         cmos_bcd_write(min, RTC_MINUTES_ALARM, rtc_control);
259         cmos_bcd_write(sec, RTC_SECONDS_ALARM, rtc_control);
260
261         /*
262          * If the system supports an enhanced alarm it will have non-zero
263          * offsets into the CMOS RAM here -- which for some reason are pointing
264          * to the RTC area of memory.
265          */
266         if (acpi_gbl_FADT.day_alarm)
267                 cmos_bcd_write(day, acpi_gbl_FADT.day_alarm, rtc_control);
268         if (acpi_gbl_FADT.month_alarm)
269                 cmos_bcd_write(mo, acpi_gbl_FADT.month_alarm, rtc_control);
270         if (acpi_gbl_FADT.century) {
271                 if (adjust)
272                         yr += cmos_bcd_read(acpi_gbl_FADT.century, rtc_control) * 100;
273                 cmos_bcd_write(yr / 100, acpi_gbl_FADT.century, rtc_control);
274         }
275         /* enable the rtc alarm interrupt */
276         rtc_control |= RTC_AIE;
277         CMOS_WRITE(rtc_control, RTC_CONTROL);
278         CMOS_READ(RTC_INTR_FLAGS);
279
280         spin_unlock_irq(&rtc_lock);
281
282         acpi_clear_event(ACPI_EVENT_RTC);
283         acpi_enable_event(ACPI_EVENT_RTC, 0);
284
285         *ppos += count;
286
287         result = 0;
288       end:
289         return result ? result : count;
290 }
291 #endif                          /* HAVE_ACPI_LEGACY_ALARM */
292
293 static int
294 acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset)
295 {
296         struct list_head *node, *next;
297
298         seq_printf(seq, "Device\tS-state\t  Status   Sysfs node\n");
299
300         mutex_lock(&acpi_device_lock);
301         list_for_each_safe(node, next, &acpi_wakeup_device_list) {
302                 struct acpi_device *dev =
303                     container_of(node, struct acpi_device, wakeup_list);
304                 struct device *ldev;
305
306                 if (!dev->wakeup.flags.valid)
307                         continue;
308
309                 ldev = acpi_get_physical_device(dev->handle);
310                 seq_printf(seq, "%s\t  S%d\t%c%-8s  ",
311                            dev->pnp.bus_id,
312                            (u32) dev->wakeup.sleep_state,
313                            dev->wakeup.flags.run_wake ? '*' : ' ',
314                            dev->wakeup.state.enabled ? "enabled" : "disabled");
315                 if (ldev)
316                         seq_printf(seq, "%s:%s",
317                                    ldev->bus ? ldev->bus->name : "no-bus",
318                                    dev_name(ldev));
319                 seq_printf(seq, "\n");
320                 put_device(ldev);
321
322         }
323         mutex_unlock(&acpi_device_lock);
324         return 0;
325 }
326
327 static void physical_device_enable_wakeup(struct acpi_device *adev)
328 {
329         struct device *dev = acpi_get_physical_device(adev->handle);
330
331         if (dev && device_can_wakeup(dev))
332                 device_set_wakeup_enable(dev, adev->wakeup.state.enabled);
333 }
334
335 static ssize_t
336 acpi_system_write_wakeup_device(struct file *file,
337                                 const char __user * buffer,
338                                 size_t count, loff_t * ppos)
339 {
340         struct list_head *node, *next;
341         char strbuf[5];
342         char str[5] = "";
343         unsigned int len = count;
344         struct acpi_device *found_dev = NULL;
345
346         if (len > 4)
347                 len = 4;
348         if (len < 0)
349                 return -EFAULT;
350
351         if (copy_from_user(strbuf, buffer, len))
352                 return -EFAULT;
353         strbuf[len] = '\0';
354         sscanf(strbuf, "%s", str);
355
356         mutex_lock(&acpi_device_lock);
357         list_for_each_safe(node, next, &acpi_wakeup_device_list) {
358                 struct acpi_device *dev =
359                     container_of(node, struct acpi_device, wakeup_list);
360                 if (!dev->wakeup.flags.valid)
361                         continue;
362
363                 if (!strncmp(dev->pnp.bus_id, str, 4)) {
364                         dev->wakeup.state.enabled =
365                             dev->wakeup.state.enabled ? 0 : 1;
366                         found_dev = dev;
367                         break;
368                 }
369         }
370         if (found_dev) {
371                 physical_device_enable_wakeup(found_dev);
372                 list_for_each_safe(node, next, &acpi_wakeup_device_list) {
373                         struct acpi_device *dev = container_of(node,
374                                                                struct
375                                                                acpi_device,
376                                                                wakeup_list);
377
378                         if ((dev != found_dev) &&
379                             (dev->wakeup.gpe_number ==
380                              found_dev->wakeup.gpe_number)
381                             && (dev->wakeup.gpe_device ==
382                                 found_dev->wakeup.gpe_device)) {
383                                 printk(KERN_WARNING
384                                        "ACPI: '%s' and '%s' have the same GPE, "
385                                        "can't disable/enable one separately\n",
386                                        dev->pnp.bus_id, found_dev->pnp.bus_id);
387                                 dev->wakeup.state.enabled =
388                                     found_dev->wakeup.state.enabled;
389                                 physical_device_enable_wakeup(dev);
390                         }
391                 }
392         }
393         mutex_unlock(&acpi_device_lock);
394         return count;
395 }
396
397 static int
398 acpi_system_wakeup_device_open_fs(struct inode *inode, struct file *file)
399 {
400         return single_open(file, acpi_system_wakeup_device_seq_show,
401                            PDE(inode)->data);
402 }
403
404 static const struct file_operations acpi_system_wakeup_device_fops = {
405         .owner = THIS_MODULE,
406         .open = acpi_system_wakeup_device_open_fs,
407         .read = seq_read,
408         .write = acpi_system_write_wakeup_device,
409         .llseek = seq_lseek,
410         .release = single_release,
411 };
412
413 #ifdef  HAVE_ACPI_LEGACY_ALARM
414 static const struct file_operations acpi_system_alarm_fops = {
415         .owner = THIS_MODULE,
416         .open = acpi_system_alarm_open_fs,
417         .read = seq_read,
418         .write = acpi_system_write_alarm,
419         .llseek = seq_lseek,
420         .release = single_release,
421 };
422
423 static u32 rtc_handler(void *context)
424 {
425         acpi_clear_event(ACPI_EVENT_RTC);
426         acpi_disable_event(ACPI_EVENT_RTC, 0);
427
428         return ACPI_INTERRUPT_HANDLED;
429 }
430 #endif                          /* HAVE_ACPI_LEGACY_ALARM */
431
432 int __init acpi_sleep_proc_init(void)
433 {
434 #ifdef  HAVE_ACPI_LEGACY_ALARM
435         /* 'alarm' [R/W] */
436         proc_create("alarm", S_IFREG | S_IRUGO | S_IWUSR,
437                     acpi_root_dir, &acpi_system_alarm_fops);
438
439         acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL);
440         /*
441          * Disable the RTC event after installing RTC handler.
442          * Only when RTC alarm is set will it be enabled.
443          */
444         acpi_clear_event(ACPI_EVENT_RTC);
445         acpi_disable_event(ACPI_EVENT_RTC, 0);
446 #endif                          /* HAVE_ACPI_LEGACY_ALARM */
447
448         /* 'wakeup device' [R/W] */
449         proc_create("wakeup", S_IFREG | S_IRUGO | S_IWUSR,
450                     acpi_root_dir, &acpi_system_wakeup_device_fops);
451
452         return 0;
453 }