1 #include <linux/init.h>
2 #include <linux/platform_device.h>
3 #include <linux/mtd/physmap.h>
4 #include <linux/serial_8250.h>
5 #include <linux/serial_reg.h>
6 #include <linux/usb/isp116x.h>
7 #include <linux/delay.h>
8 #include <asm/machvec.h>
9 #include <mach-se/mach/se7343.h>
10 #include <asm/heartbeat.h>
14 static struct resource heartbeat_resource = {
17 .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
20 static struct platform_device heartbeat_device = {
24 .resource = &heartbeat_resource,
27 static struct mtd_partition nor_flash_partitions[] = {
35 .offset = MTDPART_OFS_APPEND,
36 .size = 31 * 1024 * 1024,
40 .offset = MTDPART_OFS_APPEND,
41 .size = MTDPART_SIZ_FULL,
45 static struct physmap_flash_data nor_flash_data = {
47 .parts = nor_flash_partitions,
48 .nr_parts = ARRAY_SIZE(nor_flash_partitions),
51 static struct resource nor_flash_resources[] = {
55 .flags = IORESOURCE_MEM,
59 static struct platform_device nor_flash_device = {
60 .name = "physmap-flash",
62 .platform_data = &nor_flash_data,
64 .num_resources = ARRAY_SIZE(nor_flash_resources),
65 .resource = nor_flash_resources,
68 #define ST16C2550C_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP)
70 static struct plat_serial8250_port serial_platform_data[] = {
73 .mapbase = 0x16000000,
75 .flags = ST16C2550C_FLAGS,
80 .mapbase = 0x17000000,
82 .flags = ST16C2550C_FLAGS,
88 static struct platform_device uart_device = {
90 .id = PLAT8250_DEV_PLATFORM,
92 .platform_data = serial_platform_data,
96 static void isp116x_delay(struct device *dev, int delay)
101 static struct resource usb_resources[] = {
105 .flags = IORESOURCE_MEM,
110 .flags = IORESOURCE_MEM,
113 /* Filled in later */
114 .flags = IORESOURCE_IRQ,
118 static struct isp116x_platform_data usb_platform_data = {
122 .int_edge_triggered = 0,
123 .remote_wakeup_enable = 0,
124 .delay = isp116x_delay,
127 static struct platform_device usb_device = {
128 .name = "isp116x-hcd",
130 .num_resources = ARRAY_SIZE(usb_resources),
131 .resource = usb_resources,
133 .platform_data = &usb_platform_data,
138 static struct platform_device *sh7343se_platform_devices[] __initdata = {
145 static int __init sh7343se_devices_setup(void)
147 /* Wire-up dynamic vectors */
148 serial_platform_data[0].irq = se7343_fpga_irq[SE7343_FPGA_IRQ_UARTA];
149 serial_platform_data[1].irq = se7343_fpga_irq[SE7343_FPGA_IRQ_UARTB];
151 usb_resources[2].start = usb_resources[2].end =
152 se7343_fpga_irq[SE7343_FPGA_IRQ_USB];
154 return platform_add_devices(sh7343se_platform_devices,
155 ARRAY_SIZE(sh7343se_platform_devices));
157 device_initcall(sh7343se_devices_setup);
160 * Initialize the board
162 static void __init sh7343se_setup(char **cmdline_p)
164 __raw_writew(0xf900, FPGA_OUT); /* FPGA */
166 __raw_writew(0x0002, PORT_PECR); /* PORT E 1 = IRQ5 */
167 __raw_writew(0x0020, PORT_PSELD);
169 printk(KERN_INFO "MS7343CP01 Setup...done\n");
175 static struct sh_machine_vector mv_7343se __initmv = {
176 .mv_name = "SolutionEngine 7343",
177 .mv_setup = sh7343se_setup,
178 .mv_init_irq = init_7343se_IRQ,