geometry/Makefile.in

   1 # Makefile.in generated by automake 1.11.1 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
   6 # Inc.
   7 # This Makefile.in is free software; the Free Software Foundation
   8 # gives unlimited permission to copy and/or distribute it,
   9 # with or without modifications, as long as this notice is preserved.
  10
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  14 # PARTICULAR PURPOSE.
  15
  16 @SET_MAKE@
  17
  18 # Common rules for building *.dir files in all xkb subdirectories
  19 # Replaces Imake's MakeXkbDir() rule
  20 # svu: taken from xkbdata
  21
  22 VPATH = @srcdir@
  23 pkgdatadir = $(datadir)/@PACKAGE@
  24 pkgincludedir = $(includedir)/@PACKAGE@
  25 pkglibdir = $(libdir)/@PACKAGE@
  26 pkglibexecdir = $(libexecdir)/@PACKAGE@
  27 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  28 install_sh_DATA = $(install_sh) -c -m 644
  29 install_sh_PROGRAM = $(install_sh) -c
  30 install_sh_SCRIPT = $(install_sh) -c
  31 INSTALL_HEADER = $(INSTALL_DATA)
  32 transform = $(program_transform_name)
  33 NORMAL_INSTALL = :
  34 PRE_INSTALL = :
  35 POST_INSTALL = :
  36 NORMAL_UNINSTALL = :
  37 PRE_UNINSTALL = :
  38 POST_UNINSTALL = :
  39 build_triplet = @build@
  40 host_triplet = @host@
  41 DIST_COMMON = README $(dist_dir_DATA) $(dist_geom_DATA) \
  42         $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
  43         $(top_srcdir)/xkbrules.am
  44 subdir = geometry
  45 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  46 am__aclocal_m4_deps = $(top_srcdir)/configure.in
  47 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  48         $(ACLOCAL_M4)
  49 mkinstalldirs = $(install_sh) -d
  50 CONFIG_CLEAN_FILES =
  51 CONFIG_CLEAN_VPATH_FILES =
  52 SOURCES =
  53 DIST_SOURCES =
  54 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
  55         html-recursive info-recursive install-data-recursive \
  56         install-dvi-recursive install-exec-recursive \
  57         install-html-recursive install-info-recursive \
  58         install-pdf-recursive install-ps-recursive install-recursive \
  59         installcheck-recursive installdirs-recursive pdf-recursive \
  60         ps-recursive uninstall-recursive
  61 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
  62 am__vpath_adj = case $$p in \
  63     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
  64     *) f=$$p;; \
  65   esac;
  66 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
  67 am__install_max = 40
  68 am__nobase_strip_setup = \
  69   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
  70 am__nobase_strip = \
  71   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
  72 am__nobase_list = $(am__nobase_strip_setup); \
  73   for p in $$list; do echo "$$p $$p"; done | \
  74   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  75   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
  76     if (++n[$$2] == $(am__install_max)) \
  77       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
  78     END { for (dir in files) print dir, files[dir] }'
  79 am__base_list = \
  80   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  81   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
  82 am__installdirs = "$(DESTDIR)$(dirdir)" "$(DESTDIR)$(geomdir)"
  83 DATA = $(dist_dir_DATA) $(dist_geom_DATA)
  84 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
  85   distclean-recursive maintainer-clean-recursive
  86 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
  87         $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
  88         distdir
  89 ETAGS = etags
  90 CTAGS = ctags
  91 DIST_SUBDIRS = $(SUBDIRS)
  92 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
  93 am__relativize = \
  94   dir0=`pwd`; \
  95   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  96   sed_rest='s,^[^/]*/*,,'; \
  97   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  98   sed_butlast='s,/*[^/]*$$,,'; \
  99   while test -n "$$dir1"; do \
 100     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 101     if test "$$first" != "."; then \
 102       if test "$$first" = ".."; then \
 103         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 104         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 105       else \
 106         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 107         if test "$$first2" = "$$first"; then \
 108           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 109         else \
 110           dir2="../$$dir2"; \
 111         fi; \
 112         dir0="$$dir0"/"$$first"; \
 113       fi; \
 114     fi; \
 115     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 116   done; \
 117   reldir="$$dir2"
 118 ACLOCAL = @ACLOCAL@
 119 ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
 120 ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
 121 ALL_LINGUAS = @ALL_LINGUAS@
 122 AMTAR = @AMTAR@
 123 APP_MAN_DIR = @APP_MAN_DIR@
 124 APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
 125 AUTOCONF = @AUTOCONF@
 126 AUTOHEADER = @AUTOHEADER@
 127 AUTOMAKE = @AUTOMAKE@
 128 AWK = @AWK@
 129 CC = @CC@
 130 CCDEPMODE = @CCDEPMODE@
 131 CFLAGS = @CFLAGS@
 132 CPP = @CPP@
 133 CPPFLAGS = @CPPFLAGS@
 134 CYGPATH_W = @CYGPATH_W@
 135 DATADIRNAME = @DATADIRNAME@
 136 DEFS = @DEFS@
 137 DEPDIR = @DEPDIR@
 138 DEPS_CFLAGS = @DEPS_CFLAGS@
 139 DEPS_LIBS = @DEPS_LIBS@
 140 DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
 141 DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
 142 ECHO_C = @ECHO_C@
 143 ECHO_N = @ECHO_N@
 144 ECHO_T = @ECHO_T@
 145 EGREP = @EGREP@
 146 EXEEXT = @EXEEXT@
 147 FILE_MAN_DIR = @FILE_MAN_DIR@
 148 FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
 149 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 150 GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
 151 GMSGFMT = @GMSGFMT@
 152 GMSGFMT_015 = @GMSGFMT_015@
 153 GREP = @GREP@
 154 INSTALL = @INSTALL@
 155 INSTALL_DATA = @INSTALL_DATA@
 156 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 157 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 158 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 159 INTLLIBS = @INTLLIBS@
 160 INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
 161 INTLTOOL_MERGE = @INTLTOOL_MERGE@
 162 INTLTOOL_PERL = @INTLTOOL_PERL@
 163 INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
 164 INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
 165 LDFLAGS = @LDFLAGS@
 166 LIBICONV = @LIBICONV@
 167 LIBINTL = @LIBINTL@
 168 LIBOBJS = @LIBOBJS@
 169 LIBS = @LIBS@
 170 LIB_MAN_DIR = @LIB_MAN_DIR@
 171 LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
 172 LTLIBICONV = @LTLIBICONV@
 173 LTLIBINTL = @LTLIBINTL@
 174 LTLIBOBJS = @LTLIBOBJS@
 175 MAINT = @MAINT@
 176 MAKEINFO = @MAKEINFO@
 177 MAN_SUBSTS = @MAN_SUBSTS@
 178 MISC_MAN_DIR = @MISC_MAN_DIR@
 179 MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
 180 MKDIR_P = @MKDIR_P@
 181 MSGFMT = @MSGFMT@
 182 MSGFMT_015 = @MSGFMT_015@
 183 MSGMERGE = @MSGMERGE@
 184 OBJEXT = @OBJEXT@
 185 PACKAGE = @PACKAGE@
 186 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 187 PACKAGE_NAME = @PACKAGE_NAME@
 188 PACKAGE_STRING = @PACKAGE_STRING@
 189 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 190 PACKAGE_URL = @PACKAGE_URL@
 191 PACKAGE_VERSION = @PACKAGE_VERSION@
 192 PATH_SEPARATOR = @PATH_SEPARATOR@
 193 PKG_CONFIG = @PKG_CONFIG@
 194 PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
 195 PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
 196 POSUB = @POSUB@
 197 SED = @SED@
 198 SET_MAKE = @SET_MAKE@
 199 SHELL = @SHELL@
 200 STRIP = @STRIP@
 201 USE_NLS = @USE_NLS@
 202 VERSION = @VERSION@
 203 XGETTEXT = @XGETTEXT@
 204 XGETTEXT_015 = @XGETTEXT_015@
 205 XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
 206 XKBCOMP = @XKBCOMP@
 207 XORG_MAN_PAGE = @XORG_MAN_PAGE@
 208 XSLTPROC = @XSLTPROC@
 209 abs_builddir = @abs_builddir@
 210 abs_srcdir = @abs_srcdir@
 211 abs_top_builddir = @abs_top_builddir@
 212 abs_top_srcdir = @abs_top_srcdir@
 213 ac_ct_CC = @ac_ct_CC@
 214 am__include = @am__include@
 215 am__leading_dot = @am__leading_dot@
 216 am__quote = @am__quote@
 217 am__tar = @am__tar@
 218 am__untar = @am__untar@
 219 bindir = @bindir@
 220 build = @build@
 221 build_alias = @build_alias@
 222 build_cpu = @build_cpu@
 223 build_os = @build_os@
 224 build_vendor = @build_vendor@
 225 builddir = @builddir@
 226 datadir = @datadir@
 227 datarootdir = @datarootdir@
 228 docdir = @docdir@
 229 dvidir = @dvidir@
 230 exec_prefix = @exec_prefix@
 231 host = @host@
 232 host_alias = @host_alias@
 233 host_cpu = @host_cpu@
 234 host_os = @host_os@
 235 host_vendor = @host_vendor@
 236 htmldir = @htmldir@
 237 includedir = @includedir@
 238 infodir = @infodir@
 239 install_sh = @install_sh@
 240 libdir = @libdir@
 241 libexecdir = @libexecdir@
 242 localedir = @localedir@
 243 localstatedir = @localstatedir@
 244 mandir = @mandir@
 245 mkdir_p = @mkdir_p@
 246 oldincludedir = @oldincludedir@
 247 pdfdir = @pdfdir@
 248 prefix = @prefix@
 249 program_transform_name = @program_transform_name@
 250 psdir = @psdir@
 251 sbindir = @sbindir@
 252 sharedstatedir = @sharedstatedir@
 253 srcdir = @srcdir@
 254 sysconfdir = @sysconfdir@
 255 target_alias = @target_alias@
 256 top_build_prefix = @top_build_prefix@
 257 top_builddir = @top_builddir@
 258 top_srcdir = @top_srcdir@
 259 xkb_base = @xkb_base@
 260 xkb_rules_symlink = @xkb_rules_symlink@
 261 SUBDIRS = digital_vndr  sgi_vndr
 262 geomdir = $(xkb_base)/geometry
 263 dist_geom_DATA = \
 264 amiga ataritt chicony \
 265 dell everex fujitsu \
 266 hhk hp keytronic kinesis \
 267 macintosh microsoft nec nokia \
 268 northgate pc sanwa sony thinkpad \
 269 sun typematrix winbook README
 270
 271 dir_data = $(dist_geom_DATA)
 272 dist_dir_DATA = $(subdir).dir
 273 dirdir = $(xkb_base)
 274 CLEANFILES = $(subdir).dir
 275 all: all-recursive
 276
 277 .SUFFIXES:
 278 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/xkbrules.am $(am__configure_deps)
 279         @for dep in $?; do \
 280           case '$(am__configure_deps)' in \
 281             *$$dep*) \
 282               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 283                 && { if test -f $@; then exit 0; else break; fi; }; \
 284               exit 1;; \
 285           esac; \
 286         done; \
 287         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign geometry/Makefile'; \
 288         $(am__cd) $(top_srcdir) && \
 289           $(AUTOMAKE) --foreign geometry/Makefile
 290 .PRECIOUS: Makefile
 291 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 292         @case '$?' in \
 293           *config.status*) \
 294             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 295           *) \
 296             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 297             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 298         esac;
 299
 300 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 301         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 302
 303 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 304         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 305 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 306         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 307 $(am__aclocal_m4_deps):
 308 install-dist_dirDATA: $(dist_dir_DATA)
 309         @$(NORMAL_INSTALL)
 310         test -z "$(dirdir)" || $(MKDIR_P) "$(DESTDIR)$(dirdir)"
 311         @list='$(dist_dir_DATA)'; test -n "$(dirdir)" || list=; \
 312         for p in $$list; do \
 313           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 314           echo "$$d$$p"; \
 315         done | $(am__base_list) | \
 316         while read files; do \
 317           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dirdir)'"; \
 318           $(INSTALL_DATA) $$files "$(DESTDIR)$(dirdir)" || exit $$?; \
 319         done
 320
 321 uninstall-dist_dirDATA:
 322         @$(NORMAL_UNINSTALL)
 323         @list='$(dist_dir_DATA)'; test -n "$(dirdir)" || list=; \
 324         files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 325         test -n "$$files" || exit 0; \
 326         echo " ( cd '$(DESTDIR)$(dirdir)' && rm -f" $$files ")"; \
 327         cd "$(DESTDIR)$(dirdir)" && rm -f $$files
 328 install-dist_geomDATA: $(dist_geom_DATA)
 329         @$(NORMAL_INSTALL)
 330         test -z "$(geomdir)" || $(MKDIR_P) "$(DESTDIR)$(geomdir)"
 331         @list='$(dist_geom_DATA)'; test -n "$(geomdir)" || list=; \
 332         for p in $$list; do \
 333           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 334           echo "$$d$$p"; \
 335         done | $(am__base_list) | \
 336         while read files; do \
 337           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(geomdir)'"; \
 338           $(INSTALL_DATA) $$files "$(DESTDIR)$(geomdir)" || exit $$?; \
 339         done
 340
 341 uninstall-dist_geomDATA:
 342         @$(NORMAL_UNINSTALL)
 343         @list='$(dist_geom_DATA)'; test -n "$(geomdir)" || list=; \
 344         files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 345         test -n "$$files" || exit 0; \
 346         echo " ( cd '$(DESTDIR)$(geomdir)' && rm -f" $$files ")"; \
 347         cd "$(DESTDIR)$(geomdir)" && rm -f $$files
 348
 349 # This directory's subdirectories are mostly independent; you can cd
 350 # into them and run `make' without going through this Makefile.
 351 # To change the values of `make' variables: instead of editing Makefiles,
 352 # (1) if the variable is set in `config.status', edit `config.status'
 353 #     (which will cause the Makefiles to be regenerated when you run `make');
 354 # (2) otherwise, pass the desired values on the `make' command line.
 355 $(RECURSIVE_TARGETS):
 356         @fail= failcom='exit 1'; \
 357         for f in x $$MAKEFLAGS; do \
 358           case $$f in \
 359             *=* | --[!k]*);; \
 360             *k*) failcom='fail=yes';; \
 361           esac; \
 362         done; \
 363         dot_seen=no; \
 364         target=`echo $@ | sed s/-recursive//`; \
 365         list='$(SUBDIRS)'; for subdir in $$list; do \
 366           echo "Making $$target in $$subdir"; \
 367           if test "$$subdir" = "."; then \
 368             dot_seen=yes; \
 369             local_target="$$target-am"; \
 370           else \
 371             local_target="$$target"; \
 372           fi; \
 373           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 374           || eval $$failcom; \
 375         done; \
 376         if test "$$dot_seen" = "no"; then \
 377           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 378         fi; test -z "$$fail"
 379
 380 $(RECURSIVE_CLEAN_TARGETS):
 381         @fail= failcom='exit 1'; \
 382         for f in x $$MAKEFLAGS; do \
 383           case $$f in \
 384             *=* | --[!k]*);; \
 385             *k*) failcom='fail=yes';; \
 386           esac; \
 387         done; \
 388         dot_seen=no; \
 389         case "$@" in \
 390           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 391           *) list='$(SUBDIRS)' ;; \
 392         esac; \
 393         rev=''; for subdir in $$list; do \
 394           if test "$$subdir" = "."; then :; else \
 395             rev="$$subdir $$rev"; \
 396           fi; \
 397         done; \
 398         rev="$$rev ."; \
 399         target=`echo $@ | sed s/-recursive//`; \
 400         for subdir in $$rev; do \
 401           echo "Making $$target in $$subdir"; \
 402           if test "$$subdir" = "."; then \
 403             local_target="$$target-am"; \
 404           else \
 405             local_target="$$target"; \
 406           fi; \
 407           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 408           || eval $$failcom; \
 409         done && test -z "$$fail"
 410 tags-recursive:
 411         list='$(SUBDIRS)'; for subdir in $$list; do \
 412           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 413         done
 414 ctags-recursive:
 415         list='$(SUBDIRS)'; for subdir in $$list; do \
 416           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 417         done
 418
 419 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 420         list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 421         unique=`for i in $$list; do \
 422             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 423           done | \
 424           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 425               END { if (nonempty) { for (i in files) print i; }; }'`; \
 426         mkid -fID $$unique
 427 tags: TAGS
 428
 429 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 430                 $(TAGS_FILES) $(LISP)
 431         set x; \
 432         here=`pwd`; \
 433         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 434           include_option=--etags-include; \
 435           empty_fix=.; \
 436         else \
 437           include_option=--include; \
 438           empty_fix=; \
 439         fi; \
 440         list='$(SUBDIRS)'; for subdir in $$list; do \
 441           if test "$$subdir" = .; then :; else \
 442             test ! -f $$subdir/TAGS || \
 443               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 444           fi; \
 445         done; \
 446         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 447         unique=`for i in $$list; do \
 448             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 449           done | \
 450           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 451               END { if (nonempty) { for (i in files) print i; }; }'`; \
 452         shift; \
 453         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 454           test -n "$$unique" || unique=$$empty_fix; \
 455           if test $$# -gt 0; then \
 456             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 457               "$$@" $$unique; \
 458           else \
 459             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 460               $$unique; \
 461           fi; \
 462         fi
 463 ctags: CTAGS
 464 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 465                 $(TAGS_FILES) $(LISP)
 466         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 467         unique=`for i in $$list; do \
 468             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 469           done | \
 470           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 471               END { if (nonempty) { for (i in files) print i; }; }'`; \
 472         test -z "$(CTAGS_ARGS)$$unique" \
 473           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 474              $$unique
 475
 476 GTAGS:
 477         here=`$(am__cd) $(top_builddir) && pwd` \
 478           && $(am__cd) $(top_srcdir) \
 479           && gtags -i $(GTAGS_ARGS) "$$here"
 480
 481 distclean-tags:
 482         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 483
 484 distdir: $(DISTFILES)
 485         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 486         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 487         list='$(DISTFILES)'; \
 488           dist_files=`for file in $$list; do echo $$file; done | \
 489           sed -e "s|^$$srcdirstrip/||;t" \
 490               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 491         case $$dist_files in \
 492           */*) $(MKDIR_P) `echo "$$dist_files" | \
 493                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 494                            sort -u` ;; \
 495         esac; \
 496         for file in $$dist_files; do \
 497           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 498           if test -d $$d/$$file; then \
 499             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 500             if test -d "$(distdir)/$$file"; then \
 501               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 502             fi; \
 503             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 504               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 505               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 506             fi; \
 507             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 508           else \
 509             test -f "$(distdir)/$$file" \
 510             || cp -p $$d/$$file "$(distdir)/$$file" \
 511             || exit 1; \
 512           fi; \
 513         done
 514         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 515           if test "$$subdir" = .; then :; else \
 516             test -d "$(distdir)/$$subdir" \
 517             || $(MKDIR_P) "$(distdir)/$$subdir" \
 518             || exit 1; \
 519           fi; \
 520         done
 521         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 522           if test "$$subdir" = .; then :; else \
 523             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 524             $(am__relativize); \
 525             new_distdir=$$reldir; \
 526             dir1=$$subdir; dir2="$(top_distdir)"; \
 527             $(am__relativize); \
 528             new_top_distdir=$$reldir; \
 529             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
 530             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
 531             ($(am__cd) $$subdir && \
 532               $(MAKE) $(AM_MAKEFLAGS) \
 533                 top_distdir="$$new_top_distdir" \
 534                 distdir="$$new_distdir" \
 535                 am__remove_distdir=: \
 536                 am__skip_length_check=: \
 537                 am__skip_mode_fix=: \
 538                 distdir) \
 539               || exit 1; \
 540           fi; \
 541         done
 542 check-am: all-am
 543 check: check-recursive
 544 all-am: Makefile $(DATA)
 545 installdirs: installdirs-recursive
 546 installdirs-am:
 547         for dir in "$(DESTDIR)$(dirdir)" "$(DESTDIR)$(geomdir)"; do \
 548           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 549         done
 550 install: install-recursive
 551 install-exec: install-exec-recursive
 552 install-data: install-data-recursive
 553 uninstall: uninstall-recursive
 554
 555 install-am: all-am
 556         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 557
 558 installcheck: installcheck-recursive
 559 install-strip:
 560         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 561           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 562           `test -z '$(STRIP)' || \
 563             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 564 mostlyclean-generic:
 565
 566 clean-generic:
 567         -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
 568
 569 distclean-generic:
 570         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 571         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 572
 573 maintainer-clean-generic:
 574         @echo "This command is intended for maintainers to use"
 575         @echo "it deletes files that may require special tools to rebuild."
 576 clean: clean-recursive
 577
 578 clean-am: clean-generic mostlyclean-am
 579
 580 distclean: distclean-recursive
 581         -rm -f Makefile
 582 distclean-am: clean-am distclean-generic distclean-tags
 583
 584 dvi: dvi-recursive
 585
 586 dvi-am:
 587
 588 html: html-recursive
 589
 590 html-am:
 591
 592 info: info-recursive
 593
 594 info-am:
 595
 596 install-data-am: install-dist_dirDATA install-dist_geomDATA
 597
 598 install-dvi: install-dvi-recursive
 599
 600 install-dvi-am:
 601
 602 install-exec-am:
 603
 604 install-html: install-html-recursive
 605
 606 install-html-am:
 607
 608 install-info: install-info-recursive
 609
 610 install-info-am:
 611
 612 install-man:
 613
 614 install-pdf: install-pdf-recursive
 615
 616 install-pdf-am:
 617
 618 install-ps: install-ps-recursive
 619
 620 install-ps-am:
 621
 622 installcheck-am:
 623
 624 maintainer-clean: maintainer-clean-recursive
 625         -rm -f Makefile
 626 maintainer-clean-am: distclean-am maintainer-clean-generic
 627
 628 mostlyclean: mostlyclean-recursive
 629
 630 mostlyclean-am: mostlyclean-generic
 631
 632 pdf: pdf-recursive
 633
 634 pdf-am:
 635
 636 ps: ps-recursive
 637
 638 ps-am:
 639
 640 uninstall-am: uninstall-dist_dirDATA uninstall-dist_geomDATA
 641
 642 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
 643         install-am install-strip tags-recursive
 644
 645 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 646         all all-am check check-am clean clean-generic ctags \
 647         ctags-recursive distclean distclean-generic distclean-tags \
 648         distdir dvi dvi-am html html-am info info-am install \
 649         install-am install-data install-data-am install-dist_dirDATA \
 650         install-dist_geomDATA install-dvi install-dvi-am install-exec \
 651         install-exec-am install-html install-html-am install-info \
 652         install-info-am install-man install-pdf install-pdf-am \
 653         install-ps install-ps-am install-strip installcheck \
 654         installcheck-am installdirs installdirs-am maintainer-clean \
 655         maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
 656         pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
 657         uninstall-dist_dirDATA uninstall-dist_geomDATA
 658
 659
 660 $(subdir).dir: $(dir_data)
 661         -rm -f $@
 662         $(XKBCOMP) -lfhlpR -o $@ '*'
 663
 664 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 665 # Otherwise a system limit (for SysV at least) may be exceeded.
 666 .NOEXPORT: