+++ /dev/null
-#!/usr/bin/make -f
-
-# Debian X Strike Force Build System (XSFBS): Make portion
-
-# Copyright 1996 Stephen Early
-# Copyright 1997 Mark Eichin
-# Copyright 1998-2005, 2007 Branden Robinson
-# Copyright 2005 David Nusinow
-#
-# Licensed under the GNU General Public License, version 2. See the file
-# /usr/share/common-licenses/GPL or <http://www.gnu.org/copyleft/gpl.txt>.
-
-# Originally by Stephen Early <sde1000@debian.org>
-# Modified by Mark W. Eichin <eichin@kitten.gen.ma.us>
-# Modified by Adam Heath <doogie@debian.org>
-# Modified by Branden Robinson <branden@debian.org>
-# Modified by Fabio Massimo Di Nitto <fabbione@fabbione.net>
-# Modified by David Nusinow <dnusinow@debian.org>
-# Acknowledgements to Manoj Srivastava.
-
-# Pass $(DH_OPTIONS) into the environment for debhelper's benefit.
-export DH_OPTIONS
-
-# force quilt to not use ~/.quiltrc and to use debian/patches
-QUILT = QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null
-
-# Set up parameters for the upstream build environment.
-
-# Determine (source) package name from Debian changelog.
-SOURCE_NAME:=$(shell dpkg-parsechangelog -ldebian/changelog \
- | grep '^Source:' | awk '{print $$2}')
-
-# Determine package version from Debian changelog.
-SOURCE_VERSION:=$(shell dpkg-parsechangelog -ldebian/changelog \
- | grep '^Version:' | awk '{print $$2}')
-
-# Determine upstream version number.
-UPSTREAM_VERSION:=$(shell echo $(SOURCE_VERSION) | sed 's/-.*//')
-
-# Determine the source version without the epoch for make-orig-tar-gz
-NO_EPOCH_VER:=$(shell echo $(UPSTREAM_VERSION) | sed 's/^.://')
-
-# Figure out who's building this package.
-BUILDER:=$(shell echo $${DEBEMAIL:-$${EMAIL:-$$(echo $$LOGNAME@$$(cat /etc/mailname 2>/dev/null))}})
-
-# Find out if this is an official build; an official build has nothing but
-# digits, dots, and/or the strings "woody" or "sarge" in the Debian part of the
-# version number. Anything else indicates an unofficial build.
-OFFICIAL_BUILD:=$(shell VERSION=$(SOURCE_VERSION); if ! expr "$$(echo $${VERSION\#\#*-} | sed 's/\(woody\|sarge\)//g')" : ".*[^0-9.].*" >/dev/null 2>&1; then echo yes; fi)
-
-# Set up parameters for the Debian build environment.
-
-# Determine our architecture.
-BUILD_ARCH:=$(shell dpkg-architecture -qDEB_BUILD_ARCH)
-# Work around some old-time dpkg braindamage.
-BUILD_ARCH:=$(subst i486,i386,$(BUILD_ARCH))
-# The DEB_HOST_ARCH variable may be set per the Debian cross-compilation policy.
-ifdef DEB_HOST_ARCH
- ARCH:=$(DEB_HOST_ARCH)
-else
- # dpkg-cross sets the ARCH environment variable; if set, use it.
- ifdef ARCH
- ARCH:=$(ARCH)
- else
- ARCH:=$(BUILD_ARCH)
- endif
-endif
-
-# $(STAMP_DIR) houses stamp files for complex targets.
-STAMP_DIR:=stampdir
-
-# $(SOURCE_DIR) houses one or more source trees.
-SOURCE_DIR:=build-tree
-
-# $(SOURCE_TREE) is the location of the source tree to be compiled. If there
-# is more than one, others are found using this name plus a suffix to indicate
-# the purpose of the additional tree (e.g., $(SOURCE_TREE)-custom). The
-# "setup" target is responsible for creating such trees.
-#SOURCE_TREE:=$(SOURCE_DIR)/xc
-#FIXME We need to define this in our debian/rules file
-
-# $(DEBTREEDIR) is where all install rules are told (via $(DESTDIR)) to place
-# their files.
-DEBTREEDIR:=$(CURDIR)/debian/tmp
-
-# All "important" targets have four lines:
-# 1) A target name that is invoked by a package-building tool or the user.
-# This consists of a dependency on a "$(STAMP_DIR)/"-prefixed counterpart.
-# 2) A line delcaring 1) as a phony target (".PHONY:").
-# 3) A "$(STAMP_DIR)/"-prefixed target which does the actual work, and may
-# depend on other targets.
-# 4) A line declaring 3) as a member of the $(stampdir_targets) variable; the
-# "$(STAMP_DIR)/" prefix is omitted.
-#
-# This indirection is needed so that the "stamp" files that signify when a rule
-# is done can be located in a separate "stampdir". Recall that make has no way
-# to know when a goal has been met for a phony target (like "build" or
-# "install").
-#
-# At the end of each "$(STAMP_DIR)/" target, be sure to run the command ">$@"
-# so that the target will not be run again. Removing the file will make Make
-# run the target over.
-
-# All phony targets should be declared as dependencies of .PHONY, even if they
-# do not have "($STAMP_DIR)/"-prefixed counterparts.
-
-# Define a harmless default rule to keep things from going nuts by accident.
-.PHONY: default
-default:
-
-# Set up the $(STAMP_DIR) directory.
-.PHONY: stampdir
-stampdir_targets+=stampdir
-stampdir: $(STAMP_DIR)/stampdir
-$(STAMP_DIR)/stampdir:
- mkdir $(STAMP_DIR)
- >$@
-
-# Set up the package build directory as quilt expects to find it.
-.PHONY: prepare
-stampdir_targets+=prepare
-prepare: $(STAMP_DIR)/genscripts $(STAMP_DIR)/prepare $(STAMP_DIR)/log
-$(STAMP_DIR)/prepare: $(STAMP_DIR)/stampdir
- if [ ! -e $(STAMP_DIR)/log ]; then \
- mkdir $(STAMP_DIR)/log; \
- fi; \
- >$@
-
-# Apply all patches to the upstream source.
-.PHONY: patch
-stampdir_targets+=patch
-patch: $(STAMP_DIR)/patch
-$(STAMP_DIR)/patch: $(STAMP_DIR)/prepare
- if ! [ `which quilt` ]; then \
- echo "Couldn't find quilt. Please install it or add it to the build-depends for this package."; \
- exit 1; \
- fi; \
- if $(QUILT) next >/dev/null 2>&1; then \
- echo -n "Applying patches..."; \
- if $(QUILT) push -a -v >$(STAMP_DIR)/log/patch 2>&1; then \
- cat $(STAMP_DIR)/log/patch; \
- echo "successful."; \
- else \
- cat $(STAMP_DIR)/log/patch; \
- echo "failed! (check $(STAMP_DIR)/log/patch for details)"; \
- exit 1; \
- fi; \
- else \
- echo "No patches to apply"; \
- fi; \
- >$@
-
-# Revert all patches to the upstream source.
-.PHONY: unpatch
-unpatch: $(STAMP_DIR)/prepare
- rm -f $(STAMP_DIR)/patch
- @echo -n "Unapplying patches..."; \
- if $(QUILT) applied >/dev/null 2>/dev/null; then \
- if $(QUILT) pop -a -v >$(STAMP_DIR)/log/unpatch 2>&1; then \
- cat $(STAMP_DIR)/log/unpatch; \
- echo "successful."; \
- else \
- cat $(STAMP_DIR)/log/unpatch; \
- echo "failed! (check $(STAMP_DIR)/log/unpatch for details)"; \
- exit 1; \
- fi; \
- else \
- echo "nothing to do."; \
- fi
-
-# Clean the generated maintainer scripts.
-.PHONY: cleanscripts
-cleanscripts:
- rm -f $(STAMP_DIR)/genscripts
- rm -f debian/*.config \
- debian/*.postinst \
- debian/*.postrm \
- debian/*.preinst \
- debian/*.prerm
-
-# Clean the package build tree.
-.PHONY: xsfclean
-xsfclean: cleanscripts unpatch
- dh_testdir
- rm -rf .pc
- rm -rf $(STAMP_DIR) $(SOURCE_DIR)
- rm -rf imports
- dh_clean debian/shlibs.local \
- debian/po/pothead
-
-# Generate the debconf templates POT file header.
-debian/po/pothead: debian/po/pothead.in
- sed -e 's/SOURCE_VERSION/$(SOURCE_VERSION)/' \
- -e 's/DATE/$(shell date "+%F %X%z"/)' <$< >$@
-
-# Update POT and PO files.
-.PHONY: updatepo
-updatepo: debian/po/pothead
- debian/scripts/debconf-updatepo --pot-header=pothead --verbose
-
-# Remove files from the upstream source tree that we don't need, or which have
-# licensing problems. It must be run before creating the .orig.tar.gz.
-#
-# Note: This rule is for Debian package maintainers' convenience, and is not
-# needed for conventional build scenarios.
-.PHONY: prune-upstream-tree
-prune-upstream-tree:
- # Ensure we're in the correct directory.
- dh_testdir
- grep -rvh '^#' debian/prune/ | xargs --no-run-if-empty rm -rf
-
-# Verify that there are no offsets or fuzz in the patches we apply.
-#
-# Note: This rule is for Debian package maintainers' convenience, and is not
-# needed for conventional build scenarios.
-.PHONY: patch-audit
-patch-audit: prepare unpatch
- @echo -n "Auditing patches..."; \
- >$(STAMP_DIR)/log/patch; \
- FUZZY=; \
- while [ -n "$$($(QUILT) next)" ]; do \
- RESULT=$$($(QUILT) push -v | tee -a $(STAMP_DIR)/log/patch | grep ^Hunk | sed 's/^Hunk.*\(succeeded\|FAILED\).*/\1/');\
- case "$$RESULT" in \
- succeeded) \
- echo "fuzzy patch: $$($(QUILT) top)" \
- | tee -a $(STAMP_DIR)/log/$$($(QUILT) top); \
- FUZZY=yes; \
- ;; \
- FAILED) \
- echo "broken patch: $$($(QUILT) next)" \
- | tee -a $(STAMP_DIR)/log/$$($(QUILT) next); \
- exit 1; \
- ;; \
- esac; \
- done; \
- if [ -n "$$FUZZY" ]; then \
- echo "there were fuzzy patches; please fix."; \
- exit 1; \
- else \
- echo "done."; \
- fi
-
-# Generate the maintainer scripts.
-.PHONY: genscripts
-stampdir_targets+=genscripts
-genscripts: $(STAMP_DIR)/genscripts
-$(STAMP_DIR)/genscripts: $(STAMP_DIR)/stampdir
- for FILE in debian/*.config.in \
- debian/*.postinst.in \
- debian/*.postrm.in \
- debian/*.preinst.in \
- debian/*.prerm.in; do \
- if [ -e "$$FILE" ]; then \
- MAINTSCRIPT=$$(echo $$FILE | sed 's/.in$$//'); \
- sed -n '1,/^#INCLUDE_SHELL_LIB#$$/p' <$$FILE \
- | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >$$MAINTSCRIPT.tmp; \
- cat debian/xsfbs/xsfbs.sh >>$$MAINTSCRIPT.tmp; \
- sed -n '/^#INCLUDE_SHELL_LIB#$$/,$$p' <$$FILE \
- | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >>$$MAINTSCRIPT.tmp; \
- sed -e 's/@SOURCE_VERSION@/$(SOURCE_VERSION)/' \
- -e 's/@OFFICIAL_BUILD@/$(OFFICIAL_BUILD)/' \
- -e 's/@DEFAULT_DCRESOLUTIONS@/$(DEFAULT_DCRESOLUTIONS)/' \
- <$$MAINTSCRIPT.tmp >$$MAINTSCRIPT; \
- rm $$MAINTSCRIPT.tmp; \
- fi; \
- done
- # Validate syntax of generated shell scripts.
- #sh debian/scripts/validate-posix-sh debian/*.config \
- # debian/*.postinst \
- # debian/*.postrm \
- # debian/*.preinst \
- # debian/*.prerm
- >$@
-
-# Generate the shlibs.local file.
-debian/shlibs.local:
- cat debian/*.shlibs >$@
-
-SERVERMINVERS = $(shell cat /usr/share/xserver-xorg/serverminver 2>/dev/null)
-VIDEOABI = $(shell cat /usr/share/xserver-xorg/videoabiver 2>/dev/null)
-INPUTABI = $(shell cat /usr/share/xserver-xorg/inputabiver 2>/dev/null)
-SERVER_DEPENDS = xserver-xorg-core (>= $(SERVERMINVERS))
-VIDDRIVER_PROVIDES = xserver-xorg-video-$(VIDEOABI)
-INPDRIVER_PROVIDES = xserver-xorg-input-$(INPUTABI)
-ifeq ($(PACKAGE),)
-PACKAGE=$(shell awk '/^Package:/ { print $$2; exit }' < debian/control)
-endif
-
-.PHONY: serverabi
-serverabi: install
-ifeq ($(SERVERMINVERS),)
- @echo error: xserver-xorg-dev needs to be installed
- @exit 1
-else
- echo "xserver:Depends=$(SERVER_DEPENDS)" >> debian/$(PACKAGE).substvars
- echo "xviddriver:Provides=$(VIDDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars
- echo "xinpdriver:Provides=$(INPDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars
-endif
-
-# vim:set noet ai sts=8 sw=8 tw=0:
+++ /dev/null
-# $Id$
-
-# This is the X Strike Force shell library for X Window System package
-# maintainer scripts. It serves to define shell functions commonly used by
-# such packages, and performs some error checking necessary for proper operation
-# of those functions. By itself, it does not "do" much; the maintainer scripts
-# invoke the functions defined here to accomplish package installation and
-# removal tasks.
-
-# If you are reading this within a Debian package maintainer script (e.g.,
-# /var/lib/dpkg)info/PACKAGE.{config,preinst,postinst,prerm,postrm}), you can
-# skip past this library by scanning forward in this file to the string
-# "GOBSTOPPER".
-
-SOURCE_VERSION=@SOURCE_VERSION@
-OFFICIAL_BUILD=@OFFICIAL_BUILD@
-
-# Use special abnormal exit codes so that problems with this library are more
-# easily tracked down.
-SHELL_LIB_INTERNAL_ERROR=86
-SHELL_LIB_THROWN_ERROR=74
-SHELL_LIB_USAGE_ERROR=99
-
-# old -> new variable names
-if [ -z "$DEBUG_XORG_PACKAGE" ] && [ -n "$DEBUG_XFREE86_PACKAGE" ]; then
- DEBUG_XORG_PACKAGE="$DEBUG_XFREE86_PACKAGE"
-fi
-if [ -z "$DEBUG_XORG_DEBCONF" ] && [ -n "$DEBUG_XFREE86_DEBCONF" ]; then
- DEBUG_XORG_DEBCONF="$DEBUG_XFREE86_DEBCONF"
-fi
-
-# initial sanity checks
-if [ -z "$THIS_PACKAGE" ]; then
- cat >&2 <<EOF
-Error: package maintainer script attempted to use shell library without
-definining \$THIS_PACKAGE shell variable. Please report the package name,
-version, and the text of this error message to the Debian Bug Tracking System.
-Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
-instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
-"doc-debian" package, or install the "reportbug" package and use the command of
-the same name to file a report against version $SOURCE_VERSION of this package.
-EOF
- exit $SHELL_LIB_USAGE_ERROR
-fi
-
-if [ -z "$THIS_SCRIPT" ]; then
- cat >&2 <<EOF
-Error: package maintainer script attempted to use shell library without
-definining \$THIS_SCRIPT shell variable. Please report the package name,
-version, and the text of this error message to the Debian Bug Tracking System.
-Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
-instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
-"doc-debian" package, or install the "reportbug" package and use the command of
-the same name to file a report against version $SOURCE_VERSION of the
-"$THIS_PACKAGE" package.
-EOF
- exit $SHELL_LIB_USAGE_ERROR
-fi
-
-ARCHITECTURE="$(dpkg --print-installation-architecture)"
-
-if [ "$1" = "reconfigure" ] || [ -n "$DEBCONF_RECONFIGURE" ]; then
- RECONFIGURE="true"
-else
- RECONFIGURE=
-fi
-
-if ([ "$1" = "install" ] || [ "$1" = "configure" ]) && [ -z "$2" ]; then
- FIRSTINST="yes"
-fi
-
-if [ -z "$RECONFIGURE" ] && [ -z "$FIRSTINST" ]; then
- UPGRADE="yes"
-fi
-
-trap "message;\
- message \"Received signal. Aborting $THIS_PACKAGE package $THIS_SCRIPT script.\";\
- message;\
- exit 1" HUP INT QUIT TERM
-
-reject_nondigits () {
- # syntax: reject_nondigits [ operand ... ]
- #
- # scan operands (typically shell variables whose values cannot be trusted) for
- # characters other than decimal digits and barf if any are found
- while [ -n "$1" ]; do
- # does the operand contain anything but digits?
- if ! expr "$1" : "[[:digit:]]\+$" > /dev/null 2>&1; then
- # can't use die(), because it wraps message() which wraps this function
- echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_nondigits() encountered" \
- "possibly malicious garbage \"$1\"" >&2
- exit $SHELL_LIB_THROWN_ERROR
- fi
- shift
- done
-}
-
-reject_whitespace () {
- # syntax: reject_whitespace [ operand ]
- #
- # scan operand (typically a shell variable whose value cannot be trusted) for
- # whitespace characters and barf if any are found
- if [ -n "$1" ]; then
- # does the operand contain any whitespace?
- if expr "$1" : "[[:space:]]" > /dev/null 2>&1; then
- # can't use die(), because I want to avoid forward references
- echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_whitespace() encountered" \
- "possibly malicious garbage \"$1\"" >&2
- exit $SHELL_LIB_THROWN_ERROR
- fi
- fi
-}
-
-reject_unlikely_path_chars () {
- # syntax: reject_unlikely_path_chars [ operand ... ]
- #
- # scan operands (typically shell variables whose values cannot be trusted) for
- # characters unlikely to be seen in a path and which the shell might
- # interpret and barf if any are found
- while [ -n "$1" ]; do
- # does the operand contain any funny characters?
- if expr "$1" : '.*[!$&()*;<>?|].*' > /dev/null 2>&1; then
- # can't use die(), because I want to avoid forward references
- echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_unlikely_path_chars()" \
- "encountered possibly malicious garbage \"$1\"" >&2
- exit $SHELL_LIB_THROWN_ERROR
- fi
- shift
- done
-}
-
-# Query the terminal to establish a default number of columns to use for
-# displaying messages to the user. This is used only as a fallback in the
-# event the COLUMNS variable is not set. ($COLUMNS can react to SIGWINCH while
-# the script is running, and this cannot, only being calculated once.)
-DEFCOLUMNS=$(stty size 2> /dev/null | awk '{print $2}') || true
-if ! expr "$DEFCOLUMNS" : "[[:digit:]]\+$" > /dev/null 2>&1; then
- DEFCOLUMNS=80
-fi
-
-message () {
- # pretty-print messages of arbitrary length
- reject_nondigits "$COLUMNS"
- echo "$*" | fmt -t -w ${COLUMNS:-$DEFCOLUMNS} >&2
-}
-
-observe () {
- # syntax: observe message ...
- #
- # issue observational message suitable for logging someday when support for
- # it exists in dpkg
- if [ -n "$DEBUG_XORG_PACKAGE" ]; then
- message "$THIS_PACKAGE $THIS_SCRIPT note: $*"
- fi
-}
-
-warn () {
- # syntax: warn message ...
- #
- # issue warning message suitable for logging someday when support for
- # it exists in dpkg; also send to standard error
- message "$THIS_PACKAGE $THIS_SCRIPT warning: $*"
-}
-
-die () {
- # syntax: die message ...
- #
- # exit script with error message
- message "$THIS_PACKAGE $THIS_SCRIPT error: $*"
- exit $SHELL_LIB_THROWN_ERROR
-}
-
-internal_error () {
- # exit script with error; essentially a "THIS SHOULD NEVER HAPPEN" message
- message "internal error: $*"
- if [ -n "$OFFICIAL_BUILD" ]; then
- message "Please report a bug in the $THIS_SCRIPT script of the" \
- "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
- "Tracking System. Include all messages above that mention the" \
- "$THIS_PACKAGE package. Visit " \
- "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for" \
- "instructions, read the file" \
- "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
- "package, or install the reportbug package and use the command of" \
- "the same name to file a report."
- fi
- exit $SHELL_LIB_INTERNAL_ERROR
-}
-
-usage_error () {
- message "usage error: $*"
- message "Please report a bug in the $THIS_SCRIPT script of the" \
- "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
- "Tracking System. Include all messages above that mention the" \
- "$THIS_PACKAGE package. Visit " \
- "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for" \
- "instructions, read the file" \
- "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
- "package, or install the reportbug package and use the command of" \
- "the same name to file a report."
- exit $SHELL_LIB_USAGE_ERROR
-}
-
-
-maplink () {
- # returns what symlink should point to; i.e., what the "sane" answer is
- # Keep this in sync with the debian/*.links files.
- # This is only needed for symlinks to directories.
- #
- # XXX: Most of these look wrong in the X11R7 world and need to be fixed.
- # If we've stopped using this function, fixing it might enable us to re-enable
- # it again and catch more errors.
- case "$1" in
- /etc/X11/xkb/compiled) echo /var/lib/xkb ;;
- /etc/X11/xkb/xkbcomp) echo /usr/X11R6/bin/xkbcomp ;;
- /usr/X11R6/lib/X11/app-defaults) echo /etc/X11/app-defaults ;;
- /usr/X11R6/lib/X11/fs) echo /etc/X11/fs ;;
- /usr/X11R6/lib/X11/lbxproxy) echo /etc/X11/lbxproxy ;;
- /usr/X11R6/lib/X11/proxymngr) echo /etc/X11/proxymngr ;;
- /usr/X11R6/lib/X11/rstart) echo /etc/X11/rstart ;;
- /usr/X11R6/lib/X11/twm) echo /etc/X11/twm ;;
- /usr/X11R6/lib/X11/xdm) echo /etc/X11/xdm ;;
- /usr/X11R6/lib/X11/xinit) echo /etc/X11/xinit ;;
- /usr/X11R6/lib/X11/xkb) echo /etc/X11/xkb ;;
- /usr/X11R6/lib/X11/xserver) echo /etc/X11/xserver ;;
- /usr/X11R6/lib/X11/xsm) echo /etc/X11/xsm ;;
- /usr/bin/X11) echo ../X11R6/bin ;;
- /usr/bin/rstartd) echo ../X11R6/bin/rstartd ;;
- /usr/include/X11) echo ../X11R6/include/X11 ;;
- /usr/lib/X11) echo ../X11R6/lib/X11 ;;
- *) internal_error "maplink() called with unknown path \"$1\"" ;;
- esac
-}
-
-analyze_path () {
- # given a supplied set of pathnames, break each one up by directory and do an
- # ls -dl on each component, cumulatively; i.e.
- # analyze_path /usr/X11R6/bin -> ls -dl /usr /usr/X11R6 /usr/X11R6/bin
- # Thanks to Randolph Chung for this clever hack.
-
- local f g
-
- while [ -n "$1" ]; do
- reject_whitespace "$1"
- g=
- message "Analyzing $1:"
- for f in $(echo "$1" | tr / \ ); do
- if [ -e /$g$f ]; then
- ls -dl /$g$f /$g$f.dpkg-* 2> /dev/null || true
- g=$g$f/
- else
- message "/$g$f: nonexistent; directory contents of /$g:"
- ls -l /$g
- break
- fi
- done
- shift
- done
-}
-
-find_culprits () {
- local f p dpkg_info_dir possible_culprits smoking_guns bad_packages package \
- msg
-
- reject_whitespace "$1"
- message "Searching for overlapping packages..."
- dpkg_info_dir=/var/lib/dpkg/info
- if [ -d $dpkg_info_dir ]; then
- if [ "$(echo $dpkg_info_dir/*.list)" != "$dpkg_info_dir/*.list" ]; then
- possible_culprits=$(ls -1 $dpkg_info_dir/*.list | egrep -v \
- "(xbase-clients|x11-common|xfs|xlibs)")
- if [ -n "$possible_culprits" ]; then
- smoking_guns=$(grep -l "$1" $possible_culprits || true)
- if [ -n "$smoking_guns" ]; then
- bad_packages=$(printf "\\n")
- for f in $smoking_guns; do
- # too bad you can't nest parameter expansion voodoo
- p=${f%*.list} # strip off the trailing ".list"
- package=${p##*/} # strip off the directories
- bad_packages=$(printf "%s\n%s" "$bad_packages" "$package")
- done
- msg=$(cat <<EOF
-The following packages appear to have file overlaps with the X.Org packages;
-these packages are either very old, or in violation of Debian Policy. Try
-upgrading each of these packages to the latest available version if possible:
-for example, with the command "apt-get install". If no newer version of a
-package is available, you will have to remove it; for example, with the command
-"apt-get remove". If even the latest available version of the package has
-this file overlap, please file a bug against that package with the Debian Bug
-Tracking System. You may want to refer the package maintainer to section 12.8
-of the Debian Policy manual.
-EOF
-)
- message "$msg"
- message "The overlapping packages are: $bad_packages"
- else
- message "no overlaps found."
- fi
- fi
- else
- message "cannot search; no matches for $dpkg_info_dir/*.list."
- fi
- else
- message "cannot search; $dpkg_info_dir does not exist."
- fi
-}
-
-# we require a readlink command or shell function
-if ! which readlink > /dev/null 2>&1; then
- message "The readlink command was not found. Please install version" \
- "1.13.1 or later of the debianutils package."
- readlink () {
- # returns what symlink in $1 actually points to
- perl -e '$l = shift; exit 1 unless -l $l; $r = readlink $l; exit 1 unless $r; print "$r\n"' "$1"
- }
-fi
-
-check_symlink () {
- # syntax: check_symlink symlink
- #
- # See if specified symlink points where it is supposed to. Return 0 if it
- # does, and 1 if it does not.
- #
- # Primarily used by check_symlinks_and_warn() and check_symlinks_and_bomb().
-
- local symlink
-
- # validate arguments
- if [ $# -ne 1 ]; then
- usage_error "check_symlink() called with wrong number of arguments;" \
- "expected 1, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- symlink="$1"
-
- if [ "$(maplink "$symlink")" = "$(readlink "$symlink")" ]; then
- return 0
- else
- return 1
- fi
-}
-
-check_symlinks_and_warn () {
- # syntax: check_symlinks_and_warn symlink ...
- #
- # For each argument, check for symlink sanity, and warn if it isn't sane.
- #
- # Call this function from a preinst script in the event $1 is "upgrade" or
- # "install".
-
- local errmsg symlink
-
- # validate arguments
- if [ $# -lt 1 ]; then
- usage_error "check_symlinks_and_warn() called with wrong number of" \
- "arguments; expected at least 1, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- while [ -n "$1" ]; do
- symlink="$1"
- if [ -L "$symlink" ]; then
- if ! check_symlink "$symlink"; then
- observe "$symlink symbolic link points to wrong location" \
- "$(readlink "$symlink"); removing"
- rm "$symlink"
- fi
- elif [ -e "$symlink" ]; then
- errmsg="$symlink exists and is not a symbolic link; this package cannot"
- errmsg="$errmsg be installed until this"
- if [ -f "$symlink" ]; then
- errmsg="$errmsg file"
- elif [ -d "$symlink" ]; then
- errmsg="$errmsg directory"
- else
- errmsg="$errmsg thing"
- fi
- errmsg="$errmsg is removed"
- die "$errmsg"
- fi
- shift
- done
-}
-
-check_symlinks_and_bomb () {
- # syntax: check_symlinks_and_bomb symlink ...
- #
- # For each argument, check for symlink sanity, and bomb if it isn't sane.
- #
- # Call this function from a postinst script.
-
- local problem symlink
-
- # validate arguments
- if [ $# -lt 1 ]; then
- usage_error "check_symlinks_and_bomb() called with wrong number of"
- "arguments; expected at least 1, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- while [ -n "$1" ]; do
- problem=
- symlink="$1"
- if [ -L "$symlink" ]; then
- if ! check_symlink "$symlink"; then
- problem=yes
- warn "$symlink symbolic link points to wrong location" \
- "$(readlink "$symlink")"
- fi
- elif [ -e "$symlink" ]; then
- problem=yes
- warn "$symlink is not a symbolic link"
- else
- problem=yes
- warn "$symlink symbolic link does not exist"
- fi
- if [ -n "$problem" ]; then
- analyze_path "$symlink" "$(readlink "$symlink")"
- find_culprits "$symlink"
- die "bad symbolic links on system"
- fi
- shift
- done
-}
-
-font_update () {
- # run $UPDATECMDS in $FONTDIRS
-
- local dir cmd shortcmd x_font_dir_prefix
-
- x_font_dir_prefix="/usr/share/fonts/X11"
-
- if [ -z "$UPDATECMDS" ]; then
- usage_error "font_update() called but \$UPDATECMDS not set"
- fi
- if [ -z "$FONTDIRS" ]; then
- usage_error "font_update() called but \$FONTDIRS not set"
- fi
-
- reject_unlikely_path_chars "$UPDATECMDS"
- reject_unlikely_path_chars "$FONTDIRS"
-
- for dir in $FONTDIRS; do
- if [ -d "$x_font_dir_prefix/$dir" ]; then
- for cmd in $UPDATECMDS; do
- if which "$cmd" > /dev/null 2>&1; then
- shortcmd=${cmd##*/}
- observe "running $shortcmd in $dir font directory"
- cmd_opts=
- if [ "$shortcmd" = "update-fonts-alias" ]; then
- cmd_opts=--x11r7-layout
- fi
- if [ "$shortcmd" = "update-fonts-dir" ]; then
- cmd_opts=--x11r7-layout
- fi
- if [ "$shortcmd" = "update-fonts-scale" ]; then
- cmd_opts=--x11r7-layout
- fi
- $cmd $cmd_opts $dir || warn "$cmd $cmd_opts $dir" \
- "failed; font directory data may not" \
- "be up to date"
- else
- warn "$cmd not found; not updating corresponding $dir font" \
- "directory data"
- fi
- done
- else
- warn "$dir is not a directory; not updating font directory data"
- fi
- done
-}
-
-remove_conffile_prepare () {
- # syntax: remove_conffile_prepare filename official_md5sum ...
- #
- # Check a conffile "filename" against a list of canonical MD5 checksums.
- # If the file's current MD5 checksum matches one of the "official_md5sum"
- # operands provided, then prepare the conffile for removal from the system.
- # We defer actual deletion until the package is configured so that we can
- # roll this operation back if package installation fails.
- #
- # Call this function from a preinst script in the event $1 is "upgrade" or
- # "install" and verify $2 to ensure the package is being upgraded from a
- # version (or installed over a version removed-but-not-purged) prior to the
- # one in which the conffile was obsoleted.
-
- local conffile current_checksum
-
- # validate arguments
- if [ $# -lt 2 ]; then
- usage_error "remove_conffile_prepare() called with wrong number of" \
- "arguments; expected at least 2, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- conffile="$1"
- shift
-
- # does the conffile even exist?
- if [ -e "$conffile" ]; then
- # calculate its checksum
- current_checksum=$(md5sum < "$conffile" | sed 's/[[:space:]].*//')
- # compare it to each supplied checksum
- while [ -n "$1" ]; do
- if [ "$current_checksum" = "$1" ]; then
- # we found a match; move the confffile and stop looking
- observe "preparing obsolete conffile $conffile for removal"
- mv "$conffile" "$conffile.$THIS_PACKAGE-tmp"
- break
- fi
- shift
- done
- fi
-}
-
-remove_conffile_lookup () {
- # syntax: remove_conffile_lookup package filename
- #
- # Lookup the md5sum of a conffile in dpkg's database, and prepare for removal
- # if it matches the actual file's md5sum.
- #
- # Call this function when you would call remove_conffile_prepare but only
- # want to check against dpkg's status database instead of known checksums.
-
- local package conffile old_md5sum
-
- # validate arguments
- if [ $# -ne 2 ]; then
- usage_error "remove_conffile_lookup() called with wrong number of" \
- "arguments; expected 1, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- package="$1"
- conffile="$2"
-
- if ! [ -e "$conffile" ]; then
- return
- fi
- old_md5sum="$(dpkg-query -W -f='${Conffiles}' "$package" | \
- awk '{ if (match($0, "^ '"$conffile"' ")) print $2}')"
- if [ -n "$old_md5sum" ]; then
- remove_conffile_prepare "$conffile" "$old_md5sum"
- fi
-}
-
-remove_conffile_commit () {
- # syntax: remove_conffile_commit filename
- #
- # Complete the removal of a conffile "filename" that has become obsolete.
- #
- # Call this function from a postinst script after having used
- # remove_conffile_prepare() in the preinst.
-
- local conffile
-
- # validate arguments
- if [ $# -ne 1 ]; then
- usage_error "remove_conffile_commit() called with wrong number of" \
- "arguments; expected 1, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- conffile="$1"
-
- # if the temporary file created by remove_conffile_prepare() exists, remove it
- if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then
- observe "committing removal of obsolete conffile $conffile"
- rm "$conffile.$THIS_PACKAGE-tmp"
- fi
-}
-
-remove_conffile_rollback () {
- # syntax: remove_conffile_rollback filename
- #
- # Roll back the removal of a conffile "filename".
- #
- # Call this function from a postrm script in the event $1 is "abort-upgrade"
- # or "abort-install" is after having used remove_conffile_prepare() in the
- # preinst.
-
- local conffile
-
- # validate arguments
- if [ $# -ne 1 ]; then
- usage_error "remove_conffile_rollback() called with wrong number of" \
- "arguments; expected 1, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- conffile="$1"
-
- # if the temporary file created by remove_conffile_prepare() exists, move it
- # back
- if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then
- observe "rolling back removal of obsolete conffile $conffile"
- mv "$conffile.$THIS_PACKAGE-tmp" "$conffile"
- fi
-}
-
-replace_conffile_with_symlink_prepare () {
- # syntax: replace_conffile_with_symlink_prepare oldfilename newfilename \
- # official_md5sum ...
- #
- # Check a conffile "oldfilename" against a list of canonical MD5 checksums.
- # If the file's current MD5 checksum matches one of the "official_md5sum"
- # operands provided, then prepare the conffile for removal from the system.
- # We defer actual deletion until the package is configured so that we can
- # roll this operation back if package installation fails. Otherwise copy it
- # to newfilename and let dpkg handle it through conffiles mechanism.
- #
- # Call this function from a preinst script in the event $1 is "upgrade" or
- # "install" and verify $2 to ensure the package is being upgraded from a
- # version (or installed over a version removed-but-not-purged) prior to the
- # one in which the conffile was obsoleted.
-
- local conffile current_checksum
-
- # validate arguments
- if [ $# -lt 3 ]; then
- usage_error "replace_conffile_with_symlink_prepare() called with wrong" \
- " number of arguments; expected at least 3, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- oldconffile="$1"
- shift
- newconffile="$1"
- shift
-
- remove_conffile_prepare "$_oldconffile" "$@"
- # If $oldconffile still exists, then md5sums didn't match.
- # Copy it to new one.
- if [ -f "$oldconffile" ]; then
- cp "$oldconffile" "$newconffile"
- fi
-
-}
-
-replace_conffile_with_symlink_commit () {
- # syntax: replace_conffile_with_symlink_commit oldfilename
- #
- # Complete the removal of a conffile "oldfilename" that has been
- # replaced by a symlink.
- #
- # Call this function from a postinst script after having used
- # replace_conffile_with_symlink_prepare() in the preinst.
-
- local conffile
-
- # validate arguments
- if [ $# -ne 1 ]; then
- usage_error "replace_conffile_with_symlink_commit() called with wrong" \
- "number of arguments; expected 1, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- conffile="$1"
-
- remove_conffile_commit "$conffile"
-}
-
-replace_conffile_with_symlink_rollback () {
- # syntax: replace_conffile_with_symlink_rollback oldfilename newfilename
- #
- # Roll back the replacing of a conffile "oldfilename" with symlink to
- # "newfilename".
- #
- # Call this function from a postrm script in the event $1 is "abort-upgrade"
- # or "abort-install" and verify $2 to ensure the package failed to upgrade
- # from a version (or install over a version removed-but-not-purged) prior
- # to the one in which the conffile was obsoleted.
- # You should have used replace_conffile_with_symlink_prepare() in the
- # preinst.
-
- local conffile
-
- # validate arguments
- if [ $# -ne 2 ]; then
- usage_error "replace_conffile_with_symlink_rollback() called with wrong" \
- "number of arguments; expected 2, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- oldconffile="$1"
- newconffile="$2"
-
- remove_conffile_rollback "$_oldconffile"
- if [ -f "$newconffile" ]; then
- rm "$newconffile"
- fi
-}
-
-run () {
- # syntax: run command [ argument ... ]
- #
- # Run specified command with optional arguments and report its exit status.
- # Useful for commands whose exit status may be nonzero, but still acceptable,
- # or commands whose failure is not fatal to us.
- #
- # NOTE: Do *not* use this function with db_get or db_metaget commands; in
- # those cases the return value of the debconf command *must* be checked
- # before the string returned by debconf is used for anything.
-
- local retval
-
- # validate arguments
- if [ $# -lt 1 ]; then
- usage_error "run() called with wrong number of arguments; expected at" \
- "least 1, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- "$@" || retval=$?
-
- if [ ${retval:-0} -ne 0 ]; then
- observe "command \"$*\" exited with status $retval"
- fi
-}
-
-register_x_lib_dir_with_ld_so () {
- # syntax: register_x_lib_dir_with_ld_so
- #
- # Configure the dynamic loader ld.so to search /usr/X11R6/lib for shared
- # libraries.
- #
- # Call this function from the postinst script of a package that places a
- # shared library in /usr/X11R6/lib, before invoking ldconfig.
-
- local dir ldsoconf
-
- dir="/usr/X11R6/lib"
- ldsoconf="/etc/ld.so.conf"
-
- # is the line not already present?
- if ! fgrep -qsx "$dir" "$ldsoconf"; then
- observe "adding $dir directory to $ldsoconf"
- echo "$dir" >> "$ldsoconf"
- fi
-}
-
-deregister_x_lib_dir_with_ld_so () {
- # syntax: deregister_x_lib_dir_with_ld_so
- #
- # Configure dynamic loader ld.so to not search /usr/X11R6/lib for shared
- # libraries, if and only if no shared libaries remain there.
- #
- # Call this function from the postrm script of a package that places a shared
- # library in /usr/X11R6/lib, in the event "$1" is "remove", and before
- # invoking ldconfig.
-
- local dir ldsoconf fgrep_status cmp_status
-
- dir="/usr/X11R6/lib"
- ldsoconf="/etc/ld.so.conf"
-
- # is the line present?
- if fgrep -qsx "$dir" "$ldsoconf"; then
- # are there any shared objects in the directory?
- if [ "$(echo "$dir"/lib*.so.*.*)" = "$dir/lib*.so.*.*" ]; then
- # glob expansion produced nothing, so no shared libraries are present
- observe "removing $dir directory from $ldsoconf"
- # rewrite the file (very carefully)
- set +e
- fgrep -svx "$dir" "$ldsoconf" > "$ldsoconf.dpkg-tmp"
- fgrep_status=$?
- set -e
- case $fgrep_status in
- 0|1) ;; # we don't actually care if any lines matched or not
- *) die "error reading \"$ldsoconf\"; fgrep exited with status" \
- "$fgrep_status" ;;
- esac
- set +e
- cmp -s "$ldsoconf.dpkg-tmp" "$ldsoconf"
- cmp_status=$?
- set -e
- case $cmp_status in
- 0) rm "$ldsoconf.dpkg-tmp" ;; # files are identical
- 1) mv "$ldsoconf.dpkg-tmp" "$ldsoconf" ;; # files differ
- *) die "error comparing \"$ldsoconf.dpkg-tmp\" to \"$ldsoconf\";" \
- "cmp exited with status $cmp_status" ;;
- esac
- fi
- fi
-}
-
-make_symlink_sane () {
- # syntax: make_symlink_sane symlink target
- #
- # Ensure that the symbolic link symlink exists, and points to target.
- #
- # If symlink does not exist, create it and point it at target.
- #
- # If symlink exists but is not a symbolic link, back it up.
- #
- # If symlink exists, is a symbolic link, but points to the wrong location, fix
- # it.
- #
- # If symlink exists, is a symbolic link, and already points to target, do
- # nothing.
- #
- # This function wouldn't be needed if ln had an -I, --idempotent option.
-
- # Validate arguments.
- if [ $# -ne 2 ]; then
- usage_error "make_symlink_sane() called with wrong number of arguments;" \
- "expected 2, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- # We could just use the positional parameters as-is, but that makes things
- # harder to follow.
- local symlink target
-
- symlink="$1"
- target="$2"
-
- if [ -L "$symlink" ] && [ "$(readlink "$symlink")" = "$target" ]; then
- observe "link from $symlink to $target already exists"
- else
- observe "creating symbolic link from $symlink to $target"
- mkdir -p "${target%/*}" "${symlink%/*}"
- ln -s -b -S ".dpkg-old" "$target" "$symlink"
- fi
-}
-
-migrate_dir_to_symlink () {
- # syntax: migrate_dir_to_symlink old_location new_location
- #
- # Per Debian Policy section 6.5.4, "A directory will never be replaced by a
- # symbolic link to a directory or vice versa; instead, the existing state
- # (symlink or not) will be left alone and dpkg will follow the symlink if
- # there is one."
- #
- # We have to do it ourselves.
- #
- # This function moves the contents of old_location, a directory, into
- # new_location, a directory, then makes old_location a symbolic link to
- # new_location.
- #
- # old_location need not exist, but if it does, it must be a directory (or a
- # symlink to a directory). If it is not, it is backed up. If new_location
- # exists already and is not a directory, it is backed up.
- #
- # This function should be called from a package's preinst so that other
- # packages unpacked after this one --- but before this package's postinst runs
- # --- are unpacked into new_location even if their payloads contain
- # old_location filespecs.
-
- # Validate arguments.
- if [ $# -ne 2 ]; then
- usage_error "migrate_dir_to_symlink() called with wrong number of"
- "arguments; expected 2, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- # We could just use the positional parameters as-is, but that makes things
- # harder to follow.
- local new old
-
- old="$1"
- new="$2"
-
- # Is old location a symlink?
- if [ -L "$old" ]; then
- # Does it already point to new location?
- if [ "$(readlink "$old")" = "$new" ]; then
- # Nothing to do; migration has already been done.
- observe "migration of $old to $new already done"
- return 0
- else
- # Back it up.
- warn "backing up symbolic link $old as $old.dpkg-old"
- mv -b "$old" "$old.dpkg-old"
- fi
- fi
-
- # Does old location exist, but is not a directory?
- if [ -e "$old" ] && ! [ -d "$old" ]; then
- # Back it up.
- warn "backing up non-directory $old as $old.dpkg-old"
- mv -b "$old" "$old.dpkg-old"
- fi
-
- observe "migrating $old to $new"
-
- # Is new location a symlink?
- if [ -L "$new" ]; then
- # Does it point the wrong way, i.e., back to where we're migrating from?
- if [ "$(readlink "$new")" = "$old" ]; then
- # Get rid of it.
- observe "removing symbolic link $new which points to $old"
- rm "$new"
- else
- # Back it up.
- warn "backing up symbolic link $new as $new.dpkg-old"
- mv -b "$new" "$new.dpkg-old"
- fi
- fi
-
- # Does new location exist, but is not a directory?
- if [ -e "$new" ] && ! [ -d "$new" ]; then
- warn "backing up non-directory $new as $new.dpkg-old"
- mv -b "$new" "$new.dpkg-old"
- fi
-
- # Create new directory if it does not yet exist.
- if ! [ -e "$new" ]; then
- observe "creating $new"
- mkdir -p "$new"
- fi
-
- # Copy files in old location to new location. Back up any filenames that
- # already exist in the new location with the extension ".dpkg-old".
- observe "copying files from $old to $new"
- if ! (cd "$old" && cp -a -b -S ".dpkg-old" . "$new"); then
- die "error(s) encountered while copying files from $old to $new"
- fi
-
- # Remove files at old location.
- observe "removing $old"
- rm -r "$old"
-
- # Create symlink from old location to new location.
- make_symlink_sane "$old" "$new"
-}
-
-# vim:set ai et sw=2 ts=2 tw=80:
-
-# GOBSTOPPER: The X Strike Force shell library ends here.
projects / framework / uifw / xorg / lib / libdri2.git / commitdiff