*.a
*.so
build-stamp
-config.sub
-config.guess
libcrypto.pc
libcrypto.so.0.9.8
libssl.pc
OpenSSL CHANGES
_______________
+ Changes between 1.0.0e and 1.0.0f [4 Jan 2012]
+
+ *) Nadhem Alfardan and Kenny Paterson have discovered an extension
+ of the Vaudenay padding oracle attack on CBC mode encryption
+ which enables an efficient plaintext recovery attack against
+ the OpenSSL implementation of DTLS. Their attack exploits timing
+ differences arising during decryption processing. A research
+ paper describing this attack can be found at:
+ http://www.isg.rhul.ac.uk/~kp/dtls.pdf
+ Thanks go to Nadhem Alfardan and Kenny Paterson of the Information
+ Security Group at Royal Holloway, University of London
+ (www.isg.rhul.ac.uk) for discovering this flaw and to Robin Seggelmann
+ <seggelmann@fh-muenster.de> and Michael Tuexen <tuexen@fh-muenster.de>
+ for preparing the fix. (CVE-2011-4108)
+ [Robin Seggelmann, Michael Tuexen]
+
+ *) Clear bytes used for block padding of SSL 3.0 records.
+ (CVE-2011-4576)
+ [Adam Langley (Google)]
+
+ *) Only allow one SGC handshake restart for SSL/TLS. (CVE-2011-4619)
+ [Adam Langley (Google)]
+
+ *) Check parameters are not NULL in GOST ENGINE. (CVE-2012-0027)
+ [Andrey Kulikov <amdeich@gmail.com>]
+
+ *) Prevent malformed RFC3779 data triggering an assertion failure.
+ Thanks to Andrew Chi, BBN Technologies, for discovering the flaw
+ and Rob Austein <sra@hactrn.net> for fixing it. (CVE-2011-4577)
+ [Rob Austein <sra@hactrn.net>]
+
+ *) Improved PRNG seeding for VOS.
+ [Paul Green <Paul.Green@stratus.com>]
+
+ *) Fix ssl_ciph.c set-up race.
+ [Adam Langley (Google)]
+
+ *) Fix spurious failures in ecdsatest.c.
+ [Emilia Käsper (Google)]
+
+ *) Fix the BIO_f_buffer() implementation (which was mixing different
+ interpretations of the '..._len' fields).
+ [Adam Langley (Google)]
+
+ *) Fix handling of BN_BLINDING: now BN_BLINDING_invert_ex (rather than
+ BN_BLINDING_invert_ex) calls BN_BLINDING_update, ensuring that concurrent
+ threads won't reuse the same blinding coefficients.
+
+ This also avoids the need to obtain the CRYPTO_LOCK_RSA_BLINDING
+ lock to call BN_BLINDING_invert_ex, and avoids one use of
+ BN_BLINDING_update for each BN_BLINDING structure (previously,
+ the last update always remained unused).
+ [Emilia Käsper (Google)]
+
+ *) In ssl3_clear, preserve s3->init_extra along with s3->rbuf.
+ [Bob Buckholz (Google)]
+
Changes between 1.0.0d and 1.0.0e [6 Sep 2011]
*) Fix bug where CRLs with nextUpdate in the past are sometimes accepted
Changes between 0.9.8r and 0.9.8s [xx XXX xxxx]
+ *) Fix ssl_ciph.c set-up race.
+ [Adam Langley (Google)]
+
+ *) Fix spurious failures in ecdsatest.c.
+ [Emilia Käsper (Google)]
+
+ *) Fix the BIO_f_buffer() implementation (which was mixing different
+ interpretations of the '..._len' fields).
+ [Adam Langley (Google)]
+
+ *) Fix handling of BN_BLINDING: now BN_BLINDING_invert_ex (rather than
+ BN_BLINDING_invert_ex) calls BN_BLINDING_update, ensuring that concurrent
+ threads won't reuse the same blinding coefficients.
+
+ This also avoids the need to obtain the CRYPTO_LOCK_RSA_BLINDING
+ lock to call BN_BLINDING_invert_ex, and avoids one use of
+ BN_BLINDING_update for each BN_BLINDING structure (previously,
+ the last update always remained unused).
+ [Emilia Käsper (Google)]
+
*) Fix SSL memory handling for (EC)DH ciphersuites, in particular
for multi-threaded use of ECDH.
[Adam Langley (Google)]
"cc", "cc:-O::(unknown)::::::",
####VOS Configurations
-"vos-gcc","gcc:-O3 -Wall -D_POSIX_C_SOURCE=200112L -D_BSD -D_VOS_EXTENDED_NAMES -DB_ENDIAN::(unknown):VOS:-Wl,-map:BN_LLONG:${no_asm}:::::.so:",
-"debug-vos-gcc","gcc:-O0 -g -Wall -D_POSIX_C_SOURCE=200112L -D_BSD -D_VOS_EXTENDED_NAMES -DB_ENDIAN -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG::(unknown):VOS:-Wl,-map:BN_LLONG:${no_asm}:::::.so:",
+"vos-gcc","gcc:-O3 -Wall -DOPENSSL_SYSNAME_VOS -D_POSIX_C_SOURCE=200112L -D_BSD -D_VOS_EXTENDED_NAMES -DB_ENDIAN::(unknown):VOS:-Wl,-map:BN_LLONG:${no_asm}:::::.so:",
+"debug-vos-gcc","gcc:-O0 -g -Wall -DOPENSSL_SYSNAME_VOS -D_POSIX_C_SOURCE=200112L -D_BSD -D_VOS_EXTENDED_NAMES -DB_ENDIAN -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG::(unknown):VOS:-Wl,-map:BN_LLONG:${no_asm}:::::.so:",
#### Solaris x86 with GNU C setups
# -DOPENSSL_NO_INLINE_ASM switches off inline assembler. We have to do it
"darwin64-ppc-cc","cc:-arch ppc64 -O3 -DB_ENDIAN::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${ppc64_asm}:osx64:dlfcn:darwin-shared:-fPIC -fno-common:-arch ppc64 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
"darwin-i386-cc","cc:-arch i386 -O3 -fomit-frame-pointer -DL_ENDIAN::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:BN_LLONG RC4_INT RC4_CHUNK DES_UNROLL BF_PTR:${x86_asm}:macosx:dlfcn:darwin-shared:-fPIC -fno-common:-arch i386 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
"debug-darwin-i386-cc","cc:-arch i386 -g3 -DL_ENDIAN::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:BN_LLONG RC4_INT RC4_CHUNK DES_UNROLL BF_PTR:${x86_asm}:macosx:dlfcn:darwin-shared:-fPIC -fno-common:-arch i386 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
-"darwin64-x86_64-cc","cc:-arch x86_64 -O3 -DL_ENDIAN -DMD32_REG_T=int -Wall::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:macosx:dlfcn:darwin-shared:-fPIC -fno-common:-arch x86_64 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
+"darwin64-x86_64-cc","cc:-arch x86_64 -O3 -DL_ENDIAN -DMD32_REG_T=int -Wall::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL:".eval{my $asm=$x86_64_asm;$asm=~s/rc4\-[^:]+//;$asm}.":macosx:dlfcn:darwin-shared:-fPIC -fno-common:-arch x86_64 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
"debug-darwin-ppc-cc","cc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -DB_ENDIAN -g -Wall -O::-D_REENTRANT:MACOSX::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${ppc32_asm}:osx32:dlfcn:darwin-shared:-fPIC:-dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
##### A/UX
* Which is the current version of OpenSSL?
The current version is available from <URL: http://www.openssl.org>.
-OpenSSL 1.0.0e was released on Sep 6th, 2011.
+OpenSSL 1.0.0f was released on Jan 4th, 2012.
In addition to the current stable release, you can also access daily
snapshots of the OpenSSL development version at <URL:
## Makefile for OpenSSL
##
-VERSION=1.0.0e
+VERSION=1.0.0f
MAJOR=1
MINOR=0.0
SHLIB_VERSION_NUMBER=1.0.0
SHLIB_VERSION_HISTORY=
SHLIB_MAJOR=1
SHLIB_MINOR=0.0
-SHLIB_EXT=
-PLATFORM=dist
-OPTIONS= no-gmp no-jpake no-krb5 no-md2 no-rc5 no-rfc3779 no-shared no-store no-zlib no-zlib-dynamic static-engine
-CONFIGURE_ARGS=dist
-SHLIB_TARGET=
+SHLIB_EXT=.so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
+PLATFORM=linux-generic32
+OPTIONS=enable-shared --prefix=/usr --install-prefix=/home/kidong/work/SLP/PKGS_PRIVATE/OPENSSL/openssl_0120/debian/tmp -ldl enable-md2 no-asm no-camellia no-gmp no-idea no-jpake no-krb5 no-rc5 no-rfc3779 no-store no-zlib no-zlib-dynamic no-static-engine
+CONFIGURE_ARGS=shared --prefix=/usr --install-prefix=/home/kidong/work/SLP/PKGS_PRIVATE/OPENSSL/openssl_0120/debian/tmp linux-generic32 -ldl no-asm no-idea no-camellia enable-md2
+SHLIB_TARGET=linux-shared
# HERE indicates where this Makefile lives. This can be used to indicate
# where sub-Makefiles are expected to be. Currently has very limited usage,
# INSTALL_PREFIX is for package builders so that they can configure
# for, say, /usr/ and yet have everything installed to /tmp/somedir/usr/.
# Normally it is left empty.
-INSTALL_PREFIX=
-INSTALLTOP=/usr/local/ssl
+INSTALL_PREFIX=/home/kidong/work/SLP/PKGS_PRIVATE/OPENSSL/openssl_0120/debian/tmp
+INSTALLTOP=/usr
# Do not edit this manually. Use Configure --openssldir=DIR do change this!
-OPENSSLDIR=/usr/local/ssl
+OPENSSLDIR=/usr/ssl
# NO_IDEA - Define to build without the IDEA algorithm
# NO_RC4 - Define to build without the RC4 algorithm
# equal 4.
# PKCS1_CHECK - pkcs1 tests.
-CC= cc
-CFLAG= -O
-DEPFLAG= -DOPENSSL_NO_GMP -DOPENSSL_NO_JPAKE -DOPENSSL_NO_MD2 -DOPENSSL_NO_RC5 -DOPENSSL_NO_RFC3779 -DOPENSSL_NO_STORE
+CC= gcc
+CFLAG= -fPIC -DOPENSSL_PIC -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -DTERMIO -O3 -fomit-frame-pointer -Wall
+DEPFLAG= -DOPENSSL_NO_CAMELLIA -DOPENSSL_NO_GMP -DOPENSSL_NO_IDEA -DOPENSSL_NO_JPAKE -DOPENSSL_NO_RC5 -DOPENSSL_NO_RFC3779 -DOPENSSL_NO_STORE
PEX_LIBS=
-EX_LIBS=
+EX_LIBS= -ldl -ldl
EXE_EXT=
ARFLAGS=
AR= ar $(ARFLAGS) r
PERL= /usr/bin/perl
TAR= tar
TARFLAGS= --no-recursion
-MAKEDEPPROG=makedepend
+MAKEDEPPROG= gcc
LIBDIR=lib
# We let the C compiler driver to take care of .s files. This is done in
RMD160_ASM_OBJ=
WP_ASM_OBJ= wp_block.o
CMLL_ENC= camellia.o cmll_misc.o cmll_cbc.o
-PERLASM_SCHEME=
+PERLASM_SCHEME= void
# KRB5 stuff
KRB5_INCLUDES=
# dirs in crypto to build
SDIRS= \
objects \
- md4 md5 sha mdc2 hmac ripemd whrlpool \
- des aes rc2 rc4 idea bf cast camellia seed modes \
+ md2 md4 md5 sha mdc2 hmac ripemd whrlpool \
+ des aes rc2 rc4 bf cast seed modes \
bn ec rsa dsa ecdsa dh ecdh dso engine \
buffer bio stack lhash rand err \
evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
LIBS= libcrypto.a libssl.a
SHARED_CRYPTO=libcrypto$(SHLIB_EXT)
SHARED_SSL=libssl$(SHLIB_EXT)
-SHARED_LIBS=
-SHARED_LIBS_LINK_EXTS=
+SHARED_LIBS=$(SHARED_CRYPTO) $(SHARED_SSL)
+SHARED_LIBS_LINK_EXTS=.so.$(SHLIB_MAJOR) .so
SHARED_LDFLAGS=
GENERAL= Makefile
This file gives a brief overview of the major changes between each OpenSSL
release. For more details please read the CHANGES file.
+ Major changes between OpenSSL 1.0.0e and OpenSSL 1.0.0f:
+
+ o Fix for DTLS plaintext recovery attack CVE-2011-4108
+ o Clear block padding bytes of SSL 3.0 records CVE-2011-4576
+ o Only allow one SGC handshake restart for SSL/TLS CVE-2011-4619
+ o Check parameters are not NULL in GOST ENGINE CVE-2012-0027
+ o Check for malformed RFC3779 data CVE-2011-4577
+
Major changes between OpenSSL 1.0.0d and OpenSSL 1.0.0e:
o Fix for CRL vulnerability issue CVE-2011-3207
- OpenSSL 1.0.0e 6 Sep 2011
+ OpenSSL 1.0.0f 4 Jan 2012
Copyright (c) 1998-2011 The OpenSSL Project
Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
$!
$! Input: [.UTIL]LIBEAY.NUM,[.xxx.EXE.CRYPTO]SSL_LIBCRYPTO[32].OLB
$! [.UTIL]SSLEAY.NUM,[.xxx.EXE.SSL]SSL_LIBSSL[32].OLB
+$! [.CRYPTO.xxx]OPENSSLCONF.H
$! Output: [.xxx.EXE.CRYPTO]SSL_LIBCRYPTO_SHR[32].OPT,.MAP,.EXE
$! [.xxx.EXE.SSL]SSL_LIBSSL_SRH[32].OPT,.MAP,.EXE
$!
$ endif
$ endif
$!
+$! ----- Prepare info for processing: disabled algorithms info
+$ gosub read_disabled_algorithms_info
+$!
$ ZLIB = p2
$ zlib_lib = ""
$ if (ZLIB .nes. "")
$ if alg_entry .eqs. "" then goto loop2
$ if alg_entry .nes. ","
$ then
-$ if alg_entry .eqs. "KRB5" then goto loop ! Special for now
-$ if alg_entry .eqs. "STATIC_ENGINE" then goto loop ! Special for now
+$ if disabled_algorithms - ("," + alg_entry + ",") .nes disabled_algorithms then goto loop
$ if f$trnlnm("OPENSSL_NO_"+alg_entry) .nes. "" then goto loop
$ goto loop2
$ endif
$ endloop_rvi:
$ close vf
$ return
+$
+$! The disabled algorithms reader
+$ read_disabled_algorithms_info:
+$ disabled_algorithms = ","
+$ open /read cf [.CRYPTO.'ARCH']OPENSSLCONF.H
+$ loop_rci:
+$ read/err=endloop_rci/end=endloop_rci cf rci_line
+$ rci_line = f$edit(rci_line,"TRIM,COMPRESS")
+$ rci_ei = 0
+$ if f$extract(0,9,rci_line) .eqs. "# define " then rci_ei = 2
+$ if f$extract(0,8,rci_line) .eqs. "#define " then rci_ei = 1
+$ if rci_ei .eq. 0 then goto loop_rci
+$ rci_e = f$element(rci_ei," ",rci_line)
+$ if f$extract(0,11,rci_e) .nes. "OPENSSL_NO_" then goto loop_rci
+$ disabled_algorithms = disabled_algorithms + f$extract(11,999,rci_e) + ","
+$ goto loop_rci
+$ endloop_rci:
+$ close cf
+$ return
BIO_printf (bio_err, "-certsout file certificate output file\n");
BIO_printf (bio_err, "-signer file signer certificate file\n");
BIO_printf (bio_err, "-recip file recipient certificate file for decryption\n");
- BIO_printf (bio_err, "-skeyid use subject key identifier\n");
+ BIO_printf (bio_err, "-keyid use subject key identifier\n");
BIO_printf (bio_err, "-in file input file\n");
BIO_printf (bio_err, "-inform arg input format SMIME (default), PEM or DER\n");
BIO_printf (bio_err, "-inkey file input private key (if not signer or recipient)\n");
organizationalUnitName = Organizational Unit Name (eg, section)
#organizationalUnitName_default =
-commonName = Common Name (eg, YOUR name)
+commonName = Common Name (e.g. server FQDN or YOUR name)
commonName_max = 64
emailAddress = Email Address
organizationalUnitName = Organizational Unit Name (eg, section)
#organizationalUnitName_default =
-commonName = Common Name (eg, YOUR name)
+commonName = Common Name (e.g. server FQDN or YOUR name)
commonName_max = 64
emailAddress = Email Address
else
{
pk=load_key(bio_err,
- keyfile, FORMAT_PEM, 0,
+ keyfile, keyformat, 0,
passin, e, "request key");
if (pk == NULL) goto end;
}
--- /dev/null
+#! /bin/sh
+# Attempt to guess a canonical system name.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
+# 2011 Free Software Foundation, Inc.
+
+timestamp='2011-05-11'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Originally written by Per Bothner. Please send patches (context
+# diff format) to <config-patches@gnu.org> and include a ChangeLog
+# entry.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub. If it succeeds, it prints the system name on stdout, and
+# exits with 0. Otherwise, it exits with 1.
+#
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free
+Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit ;;
+ --version | -v )
+ echo "$version" ; exit ;;
+ --help | --h* | -h )
+ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help" >&2
+ exit 1 ;;
+ * )
+ break ;;
+ esac
+done
+
+if test $# != 0; then
+ echo "$me: too many arguments$help" >&2
+ exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,) echo "int x;" > $dummy.c ;
+ for c in cc gcc c89 c99 ; do
+ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+ CC_FOR_BUILD="$c"; break ;
+ fi ;
+ done ;
+ if test x"$CC_FOR_BUILD" = x ; then
+ CC_FOR_BUILD=no_compiler_found ;
+ fi
+ ;;
+ ,,*) CC_FOR_BUILD=$CC ;;
+ ,*,*) CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+ PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+ *:NetBSD:*:*)
+ # NetBSD (nbsd) targets should (where applicable) match one or
+ # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
+ # switched to ELF, *-*-netbsd* would select the old
+ # object file format. This provides both forward
+ # compatibility and a consistent mechanism for selecting the
+ # object file format.
+ #
+ # Note: NetBSD doesn't particularly care about the vendor
+ # portion of the name. We always set it to "unknown".
+ sysctl="sysctl -n hw.machine_arch"
+ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+ /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+ case "${UNAME_MACHINE_ARCH}" in
+ armeb) machine=armeb-unknown ;;
+ arm*) machine=arm-unknown ;;
+ sh3el) machine=shl-unknown ;;
+ sh3eb) machine=sh-unknown ;;
+ sh5el) machine=sh5le-unknown ;;
+ *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+ esac
+ # The Operating System including object format, if it has switched
+ # to ELF recently, or will in the future.
+ case "${UNAME_MACHINE_ARCH}" in
+ arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+ eval $set_cc_for_build
+ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ELF__
+ then
+ # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+ # Return netbsd for either. FIX?
+ os=netbsd
+ else
+ os=netbsdelf
+ fi
+ ;;
+ *)
+ os=netbsd
+ ;;
+ esac
+ # The OS release
+ # Debian GNU/NetBSD machines have a different userland, and
+ # thus, need a distinct triplet. However, they do not need
+ # kernel version information, so it can be replaced with a
+ # suitable tag, in the style of linux-gnu.
+ case "${UNAME_VERSION}" in
+ Debian*)
+ release='-gnu'
+ ;;
+ *)
+ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ ;;
+ esac
+ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+ # contains redundant information, the shorter form:
+ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+ echo "${machine}-${os}${release}"
+ exit ;;
+ *:OpenBSD:*:*)
+ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+ echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+ exit ;;
+ *:ekkoBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+ exit ;;
+ *:SolidBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+ exit ;;
+ macppc:MirBSD:*:*)
+ echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+ exit ;;
+ *:MirBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+ exit ;;
+ alpha:OSF1:*:*)
+ case $UNAME_RELEASE in
+ *4.0)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+ ;;
+ *5.*)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+ ;;
+ esac
+ # According to Compaq, /usr/sbin/psrinfo has been available on
+ # OSF/1 and Tru64 systems produced since 1995. I hope that
+ # covers most systems running today. This code pipes the CPU
+ # types through head -n 1, so we only detect the type of CPU 0.
+ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+ case "$ALPHA_CPU_TYPE" in
+ "EV4 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "EV4.5 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "LCA4 (21066/21068)")
+ UNAME_MACHINE="alpha" ;;
+ "EV5 (21164)")
+ UNAME_MACHINE="alphaev5" ;;
+ "EV5.6 (21164A)")
+ UNAME_MACHINE="alphaev56" ;;
+ "EV5.6 (21164PC)")
+ UNAME_MACHINE="alphapca56" ;;
+ "EV5.7 (21164PC)")
+ UNAME_MACHINE="alphapca57" ;;
+ "EV6 (21264)")
+ UNAME_MACHINE="alphaev6" ;;
+ "EV6.7 (21264A)")
+ UNAME_MACHINE="alphaev67" ;;
+ "EV6.8CB (21264C)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8AL (21264B)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8CX (21264D)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.9A (21264/EV69A)")
+ UNAME_MACHINE="alphaev69" ;;
+ "EV7 (21364)")
+ UNAME_MACHINE="alphaev7" ;;
+ "EV7.9 (21364A)")
+ UNAME_MACHINE="alphaev79" ;;
+ esac
+ # A Pn.n version is a patched version.
+ # A Vn.n version is a released version.
+ # A Tn.n version is a released field test version.
+ # A Xn.n version is an unreleased experimental baselevel.
+ # 1.2 uses "1.2" for uname -r.
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ # Reset EXIT trap before exiting to avoid spurious non-zero exit code.
+ exitcode=$?
+ trap '' 0
+ exit $exitcode ;;
+ Alpha\ *:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # Should we change UNAME_MACHINE based on the output of uname instead
+ # of the specific Alpha model?
+ echo alpha-pc-interix
+ exit ;;
+ 21064:Windows_NT:50:3)
+ echo alpha-dec-winnt3.5
+ exit ;;
+ Amiga*:UNIX_System_V:4.0:*)
+ echo m68k-unknown-sysv4
+ exit ;;
+ *:[Aa]miga[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-amigaos
+ exit ;;
+ *:[Mm]orph[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-morphos
+ exit ;;
+ *:OS/390:*:*)
+ echo i370-ibm-openedition
+ exit ;;
+ *:z/VM:*:*)
+ echo s390-ibm-zvmoe
+ exit ;;
+ *:OS400:*:*)
+ echo powerpc-ibm-os400
+ exit ;;
+ arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+ echo arm-acorn-riscix${UNAME_RELEASE}
+ exit ;;
+ arm:riscos:*:*|arm:RISCOS:*:*)
+ echo arm-unknown-riscos
+ exit ;;
+ SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+ echo hppa1.1-hitachi-hiuxmpp
+ exit ;;
+ Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+ # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+ if test "`(/bin/universe) 2>/dev/null`" = att ; then
+ echo pyramid-pyramid-sysv3
+ else
+ echo pyramid-pyramid-bsd
+ fi
+ exit ;;
+ NILE*:*:*:dcosx)
+ echo pyramid-pyramid-svr4
+ exit ;;
+ DRS?6000:unix:4.0:6*)
+ echo sparc-icl-nx6
+ exit ;;
+ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+ case `/usr/bin/uname -p` in
+ sparc) echo sparc-icl-nx7; exit ;;
+ esac ;;
+ s390x:SunOS:*:*)
+ echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4H:SunOS:5.*:*)
+ echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+ echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+ echo i386-pc-auroraux${UNAME_RELEASE}
+ exit ;;
+ i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+ eval $set_cc_for_build
+ SUN_ARCH="i386"
+ # If there is a compiler, see if it is configured for 64-bit objects.
+ # Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+ # This test works for both compilers.
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ SUN_ARCH="x86_64"
+ fi
+ fi
+ echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:6*:*)
+ # According to config.sub, this is the proper way to canonicalize
+ # SunOS6. Hard to guess exactly what SunOS6 will be like, but
+ # it's likely to be more like Solaris than SunOS4.
+ echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:*:*)
+ case "`/usr/bin/arch -k`" in
+ Series*|S4*)
+ UNAME_RELEASE=`uname -v`
+ ;;
+ esac
+ # Japanese Language versions have a version number like `4.1.3-JL'.
+ echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+ exit ;;
+ sun3*:SunOS:*:*)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ exit ;;
+ sun*:*:4.2BSD:*)
+ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+ case "`/bin/arch`" in
+ sun3)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ ;;
+ sun4)
+ echo sparc-sun-sunos${UNAME_RELEASE}
+ ;;
+ esac
+ exit ;;
+ aushp:SunOS:*:*)
+ echo sparc-auspex-sunos${UNAME_RELEASE}
+ exit ;;
+ # The situation for MiNT is a little confusing. The machine name
+ # can be virtually everything (everything which is not
+ # "atarist" or "atariste" at least should have a processor
+ # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
+ # to the lowercase version "mint" (or "freemint"). Finally
+ # the system name "TOS" denotes a system which is actually not
+ # MiNT. But MiNT is downward compatible to TOS, so this should
+ # be no problem.
+ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+ echo m68k-milan-mint${UNAME_RELEASE}
+ exit ;;
+ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+ echo m68k-hades-mint${UNAME_RELEASE}
+ exit ;;
+ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+ echo m68k-unknown-mint${UNAME_RELEASE}
+ exit ;;
+ m68k:machten:*:*)
+ echo m68k-apple-machten${UNAME_RELEASE}
+ exit ;;
+ powerpc:machten:*:*)
+ echo powerpc-apple-machten${UNAME_RELEASE}
+ exit ;;
+ RISC*:Mach:*:*)
+ echo mips-dec-mach_bsd4.3
+ exit ;;
+ RISC*:ULTRIX:*:*)
+ echo mips-dec-ultrix${UNAME_RELEASE}
+ exit ;;
+ VAX*:ULTRIX*:*:*)
+ echo vax-dec-ultrix${UNAME_RELEASE}
+ exit ;;
+ 2020:CLIX:*:* | 2430:CLIX:*:*)
+ echo clipper-intergraph-clix${UNAME_RELEASE}
+ exit ;;
+ mips:*:*:UMIPS | mips:*:*:RISCos)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h> /* for printf() prototype */
+ int main (int argc, char *argv[]) {
+#else
+ int main (argc, argv) int argc; char *argv[]; {
+#endif
+ #if defined (host_mips) && defined (MIPSEB)
+ #if defined (SYSTYPE_SYSV)
+ printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_SVR4)
+ printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+ printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+ #endif
+ #endif
+ exit (-1);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c &&
+ dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+ SYSTEM_NAME=`$dummy $dummyarg` &&
+ { echo "$SYSTEM_NAME"; exit; }
+ echo mips-mips-riscos${UNAME_RELEASE}
+ exit ;;
+ Motorola:PowerMAX_OS:*:*)
+ echo powerpc-motorola-powermax
+ exit ;;
+ Motorola:*:4.3:PL8-*)
+ echo powerpc-harris-powermax
+ exit ;;
+ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+ echo powerpc-harris-powermax
+ exit ;;
+ Night_Hawk:Power_UNIX:*:*)
+ echo powerpc-harris-powerunix
+ exit ;;
+ m88k:CX/UX:7*:*)
+ echo m88k-harris-cxux7
+ exit ;;
+ m88k:*:4*:R4*)
+ echo m88k-motorola-sysv4
+ exit ;;
+ m88k:*:3*:R3*)
+ echo m88k-motorola-sysv3
+ exit ;;
+ AViiON:dgux:*:*)
+ # DG/UX returns AViiON for all architectures
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+ if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+ then
+ if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+ [ ${TARGET_BINARY_INTERFACE}x = x ]
+ then
+ echo m88k-dg-dgux${UNAME_RELEASE}
+ else
+ echo m88k-dg-dguxbcs${UNAME_RELEASE}
+ fi
+ else
+ echo i586-dg-dgux${UNAME_RELEASE}
+ fi
+ exit ;;
+ M88*:DolphinOS:*:*) # DolphinOS (SVR3)
+ echo m88k-dolphin-sysv3
+ exit ;;
+ M88*:*:R3*:*)
+ # Delta 88k system running SVR3
+ echo m88k-motorola-sysv3
+ exit ;;
+ XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+ echo m88k-tektronix-sysv3
+ exit ;;
+ Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+ echo m68k-tektronix-bsd
+ exit ;;
+ *:IRIX*:*:*)
+ echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+ exit ;;
+ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
+ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
+ i*86:AIX:*:*)
+ echo i386-ibm-aix
+ exit ;;
+ ia64:AIX:*:*)
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+ exit ;;
+ *:AIX:2:3)
+ if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <sys/systemcfg.h>
+
+ main()
+ {
+ if (!__power_pc())
+ exit(1);
+ puts("powerpc-ibm-aix3.2.5");
+ exit(0);
+ }
+EOF
+ if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+ then
+ echo "$SYSTEM_NAME"
+ else
+ echo rs6000-ibm-aix3.2.5
+ fi
+ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+ echo rs6000-ibm-aix3.2.4
+ else
+ echo rs6000-ibm-aix3.2
+ fi
+ exit ;;
+ *:AIX:*:[4567])
+ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+ if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+ IBM_ARCH=rs6000
+ else
+ IBM_ARCH=powerpc
+ fi
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+ exit ;;
+ *:AIX:*:*)
+ echo rs6000-ibm-aix
+ exit ;;
+ ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+ echo romp-ibm-bsd4.4
+ exit ;;
+ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
+ echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
+ exit ;; # report: romp-ibm BSD 4.3
+ *:BOSX:*:*)
+ echo rs6000-bull-bosx
+ exit ;;
+ DPX/2?00:B.O.S.:*:*)
+ echo m68k-bull-sysv3
+ exit ;;
+ 9000/[34]??:4.3bsd:1.*:*)
+ echo m68k-hp-bsd
+ exit ;;
+ hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+ echo m68k-hp-bsd4.4
+ exit ;;
+ 9000/[34678]??:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ case "${UNAME_MACHINE}" in
+ 9000/31? ) HP_ARCH=m68000 ;;
+ 9000/[34]?? ) HP_ARCH=m68k ;;
+ 9000/[678][0-9][0-9])
+ if [ -x /usr/bin/getconf ]; then
+ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+ case "${sc_cpu_version}" in
+ 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+ 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+ 532) # CPU_PA_RISC2_0
+ case "${sc_kernel_bits}" in
+ 32) HP_ARCH="hppa2.0n" ;;
+ 64) HP_ARCH="hppa2.0w" ;;
+ '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
+ esac ;;
+ esac
+ fi
+ if [ "${HP_ARCH}" = "" ]; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+
+ #define _HPUX_SOURCE
+ #include <stdlib.h>
+ #include <unistd.h>
+
+ int main ()
+ {
+ #if defined(_SC_KERNEL_BITS)
+ long bits = sysconf(_SC_KERNEL_BITS);
+ #endif
+ long cpu = sysconf (_SC_CPU_VERSION);
+
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+ case CPU_PA_RISC2_0:
+ #if defined(_SC_KERNEL_BITS)
+ switch (bits)
+ {
+ case 64: puts ("hppa2.0w"); break;
+ case 32: puts ("hppa2.0n"); break;
+ default: puts ("hppa2.0"); break;
+ } break;
+ #else /* !defined(_SC_KERNEL_BITS) */
+ puts ("hppa2.0"); break;
+ #endif
+ default: puts ("hppa1.0"); break;
+ }
+ exit (0);
+ }
+EOF
+ (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+ test -z "$HP_ARCH" && HP_ARCH=hppa
+ fi ;;
+ esac
+ if [ ${HP_ARCH} = "hppa2.0w" ]
+ then
+ eval $set_cc_for_build
+
+ # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+ # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
+ # generating 64-bit code. GNU and HP use different nomenclature:
+ #
+ # $ CC_FOR_BUILD=cc ./config.guess
+ # => hppa2.0w-hp-hpux11.23
+ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+ # => hppa64-hp-hpux11.23
+
+ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+ grep -q __LP64__
+ then
+ HP_ARCH="hppa2.0w"
+ else
+ HP_ARCH="hppa64"
+ fi
+ fi
+ echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+ exit ;;
+ ia64:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ echo ia64-hp-hpux${HPUX_REV}
+ exit ;;
+ 3050*:HI-UX:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <unistd.h>
+ int
+ main ()
+ {
+ long cpu = sysconf (_SC_CPU_VERSION);
+ /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+ true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
+ results, however. */
+ if (CPU_IS_PA_RISC (cpu))
+ {
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+ default: puts ("hppa-hitachi-hiuxwe2"); break;
+ }
+ }
+ else if (CPU_IS_HP_MC68K (cpu))
+ puts ("m68k-hitachi-hiuxwe2");
+ else puts ("unknown-hitachi-hiuxwe2");
+ exit (0);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+ { echo "$SYSTEM_NAME"; exit; }
+ echo unknown-hitachi-hiuxwe2
+ exit ;;
+ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+ echo hppa1.1-hp-bsd
+ exit ;;
+ 9000/8??:4.3bsd:*:*)
+ echo hppa1.0-hp-bsd
+ exit ;;
+ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+ echo hppa1.0-hp-mpeix
+ exit ;;
+ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+ echo hppa1.1-hp-osf
+ exit ;;
+ hp8??:OSF1:*:*)
+ echo hppa1.0-hp-osf
+ exit ;;
+ i*86:OSF1:*:*)
+ if [ -x /usr/sbin/sysversion ] ; then
+ echo ${UNAME_MACHINE}-unknown-osf1mk
+ else
+ echo ${UNAME_MACHINE}-unknown-osf1
+ fi
+ exit ;;
+ parisc*:Lites*:*:*)
+ echo hppa1.1-hp-lites
+ exit ;;
+ C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+ echo c1-convex-bsd
+ exit ;;
+ C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit ;;
+ C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+ echo c34-convex-bsd
+ exit ;;
+ C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+ echo c38-convex-bsd
+ exit ;;
+ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+ echo c4-convex-bsd
+ exit ;;
+ CRAY*Y-MP:*:*:*)
+ echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*[A-Z]90:*:*:*)
+ echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+ -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*TS:*:*:*)
+ echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*T3E:*:*:*)
+ echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*SV1:*:*:*)
+ echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ *:UNICOS/mp:*:*)
+ echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+ FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
+ 5000:UNIX_System_V:4.*:*)
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
+ i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+ echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+ exit ;;
+ sparc*:BSD/OS:*:*)
+ echo sparc-unknown-bsdi${UNAME_RELEASE}
+ exit ;;
+ *:BSD/OS:*:*)
+ echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+ exit ;;
+ *:FreeBSD:*:*)
+ case ${UNAME_MACHINE} in
+ pc98)
+ echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ amd64)
+ echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ *)
+ echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ esac
+ exit ;;
+ i*:CYGWIN*:*)
+ echo ${UNAME_MACHINE}-pc-cygwin
+ exit ;;
+ *:MINGW*:*)
+ echo ${UNAME_MACHINE}-pc-mingw32
+ exit ;;
+ i*:windows32*:*)
+ # uname -m includes "-pc" on this system.
+ echo ${UNAME_MACHINE}-mingw32
+ exit ;;
+ i*:PW*:*)
+ echo ${UNAME_MACHINE}-pc-pw32
+ exit ;;
+ *:Interix*:*)
+ case ${UNAME_MACHINE} in
+ x86)
+ echo i586-pc-interix${UNAME_RELEASE}
+ exit ;;
+ authenticamd | genuineintel | EM64T)
+ echo x86_64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ IA64)
+ echo ia64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ esac ;;
+ [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+ echo i${UNAME_MACHINE}-pc-mks
+ exit ;;
+ 8664:Windows_NT:*)
+ echo x86_64-pc-mks
+ exit ;;
+ i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+ # UNAME_MACHINE based on the output of uname instead of i386?
+ echo i586-pc-interix
+ exit ;;
+ i*:UWIN*:*)
+ echo ${UNAME_MACHINE}-pc-uwin
+ exit ;;
+ amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+ echo x86_64-unknown-cygwin
+ exit ;;
+ p*:CYGWIN*:*)
+ echo powerpcle-unknown-cygwin
+ exit ;;
+ prep*:SunOS:5.*:*)
+ echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ *:GNU:*:*)
+ # the GNU system
+ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+ exit ;;
+ *:GNU/*:*:*)
+ # other systems with GNU libc and userland
+ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+ exit ;;
+ i*86:Minix:*:*)
+ echo ${UNAME_MACHINE}-pc-minix
+ exit ;;
+ alpha:Linux:*:*)
+ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+ EV5) UNAME_MACHINE=alphaev5 ;;
+ EV56) UNAME_MACHINE=alphaev56 ;;
+ PCA56) UNAME_MACHINE=alphapca56 ;;
+ PCA57) UNAME_MACHINE=alphapca56 ;;
+ EV6) UNAME_MACHINE=alphaev6 ;;
+ EV67) UNAME_MACHINE=alphaev67 ;;
+ EV68*) UNAME_MACHINE=alphaev68 ;;
+ esac
+ objdump --private-headers /bin/sh | grep -q ld.so.1
+ if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+ exit ;;
+ arm*:Linux:*:*)
+ eval $set_cc_for_build
+ if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ARM_EABI__
+ then
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ else
+ if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ARM_PCS_VFP
+ then
+ echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+ else
+ echo ${UNAME_MACHINE}-unknown-linux-gnueabihf
+ fi
+ fi
+ exit ;;
+ avr32*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ cris:Linux:*:*)
+ echo cris-axis-linux-gnu
+ exit ;;
+ crisv32:Linux:*:*)
+ echo crisv32-axis-linux-gnu
+ exit ;;
+ frv:Linux:*:*)
+ echo frv-unknown-linux-gnu
+ exit ;;
+ i*86:Linux:*:*)
+ LIBC=gnu
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #ifdef __dietlibc__
+ LIBC=dietlibc
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+ echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+ exit ;;
+ ia64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ m32r*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ m68*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ mips:Linux:*:* | mips64:Linux:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #undef CPU
+ #undef ${UNAME_MACHINE}
+ #undef ${UNAME_MACHINE}el
+ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+ CPU=${UNAME_MACHINE}el
+ #else
+ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+ CPU=${UNAME_MACHINE}
+ #else
+ CPU=
+ #endif
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
+ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+ ;;
+ or32:Linux:*:*)
+ echo or32-unknown-linux-gnu
+ exit ;;
+ padre:Linux:*:*)
+ echo sparc-unknown-linux-gnu
+ exit ;;
+ parisc64:Linux:*:* | hppa64:Linux:*:*)
+ echo hppa64-unknown-linux-gnu
+ exit ;;
+ parisc:Linux:*:* | hppa:Linux:*:*)
+ # Look for CPU level
+ case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+ PA7*) echo hppa1.1-unknown-linux-gnu ;;
+ PA8*) echo hppa2.0-unknown-linux-gnu ;;
+ *) echo hppa-unknown-linux-gnu ;;
+ esac
+ exit ;;
+ ppc64:Linux:*:*)
+ echo powerpc64-unknown-linux-gnu
+ exit ;;
+ ppc:Linux:*:*)
+ echo powerpc-unknown-linux-gnu
+ exit ;;
+ s390:Linux:*:* | s390x:Linux:*:*)
+ echo ${UNAME_MACHINE}-ibm-linux
+ exit ;;
+ sh64*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ sh*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ sparc:Linux:*:* | sparc64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ tile*:Linux:*:*)
+ echo ${UNAME_MACHINE}-tilera-linux-gnu
+ exit ;;
+ vax:Linux:*:*)
+ echo ${UNAME_MACHINE}-dec-linux-gnu
+ exit ;;
+ x86_64:Linux:*:*)
+ echo x86_64-unknown-linux-gnu
+ exit ;;
+ xtensa*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ i*86:DYNIX/ptx:4*:*)
+ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+ # earlier versions are messed up and put the nodename in both
+ # sysname and nodename.
+ echo i386-sequent-sysv4
+ exit ;;
+ i*86:UNIX_SV:4.2MP:2.*)
+ # Unixware is an offshoot of SVR4, but it has its own version
+ # number series starting with 2...
+ # I am not positive that other SVR4 systems won't match this,
+ # I just have to hope. -- rms.
+ # Use sysv4.2uw... so that sysv4* matches it.
+ echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+ exit ;;
+ i*86:OS/2:*:*)
+ # If we were able to find `uname', then EMX Unix compatibility
+ # is probably installed.
+ echo ${UNAME_MACHINE}-pc-os2-emx
+ exit ;;
+ i*86:XTS-300:*:STOP)
+ echo ${UNAME_MACHINE}-unknown-stop
+ exit ;;
+ i*86:atheos:*:*)
+ echo ${UNAME_MACHINE}-unknown-atheos
+ exit ;;
+ i*86:syllable:*:*)
+ echo ${UNAME_MACHINE}-pc-syllable
+ exit ;;
+ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
+ echo i386-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ i*86:*DOS:*:*)
+ echo ${UNAME_MACHINE}-pc-msdosdjgpp
+ exit ;;
+ i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+ UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+ if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+ echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+ else
+ echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+ fi
+ exit ;;
+ i*86:*:5:[678]*)
+ # UnixWare 7.x, OpenUNIX and OpenServer 6.
+ case `/bin/uname -X | grep "^Machine"` in
+ *486*) UNAME_MACHINE=i486 ;;
+ *Pentium) UNAME_MACHINE=i586 ;;
+ *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+ esac
+ echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+ exit ;;
+ i*86:*:3.2:*)
+ if test -f /usr/options/cb.name; then
+ UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+ echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+ elif /bin/uname -X 2>/dev/null >/dev/null ; then
+ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+ && UNAME_MACHINE=i586
+ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+ && UNAME_MACHINE=i686
+ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+ && UNAME_MACHINE=i686
+ echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+ else
+ echo ${UNAME_MACHINE}-pc-sysv32
+ fi
+ exit ;;
+ pc:*:*:*)
+ # Left here for compatibility:
+ # uname -m prints for DJGPP always 'pc', but it prints nothing about
+ # the processor, so we play safe by assuming i586.
+ # Note: whatever this is, it MUST be the same as what config.sub
+ # prints for the "djgpp" host, or else GDB configury will decide that
+ # this is a cross-build.
+ echo i586-pc-msdosdjgpp
+ exit ;;
+ Intel:Mach:3*:*)
+ echo i386-pc-mach3
+ exit ;;
+ paragon:*:*:*)
+ echo i860-intel-osf1
+ exit ;;
+ i860:*:4.*:*) # i860-SVR4
+ if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+ echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+ else # Add other i860-SVR4 vendors below as they are discovered.
+ echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
+ fi
+ exit ;;
+ mini*:CTIX:SYS*5:*)
+ # "miniframe"
+ echo m68010-convergent-sysv
+ exit ;;
+ mc68k:UNIX:SYSTEM5:3.51m)
+ echo m68k-convergent-sysv
+ exit ;;
+ M680?0:D-NIX:5.3:*)
+ echo m68k-diab-dnix
+ exit ;;
+ M68*:*:R3V[5678]*:*)
+ test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+ OS_REL=''
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4; exit; } ;;
+ NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+ OS_REL='.3'
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+ echo m68k-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ mc68030:UNIX_System_V:4.*:*)
+ echo m68k-atari-sysv4
+ exit ;;
+ TSUNAMI:LynxOS:2.*:*)
+ echo sparc-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ rs6000:LynxOS:2.*:*)
+ echo rs6000-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
+ echo powerpc-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ SM[BE]S:UNIX_SV:*:*)
+ echo mips-dde-sysv${UNAME_RELEASE}
+ exit ;;
+ RM*:ReliantUNIX-*:*:*)
+ echo mips-sni-sysv4
+ exit ;;
+ RM*:SINIX-*:*:*)
+ echo mips-sni-sysv4
+ exit ;;
+ *:SINIX-*:*:*)
+ if uname -p 2>/dev/null >/dev/null ; then
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ echo ${UNAME_MACHINE}-sni-sysv4
+ else
+ echo ns32k-sni-sysv
+ fi
+ exit ;;
+ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+ # says <Richard.M.Bartel@ccMail.Census.GOV>
+ echo i586-unisys-sysv4
+ exit ;;
+ *:UNIX_System_V:4*:FTX*)
+ # From Gerald Hewes <hewes@openmarket.com>.
+ # How about differentiating between stratus architectures? -djm
+ echo hppa1.1-stratus-sysv4
+ exit ;;
+ *:*:*:FTX*)
+ # From seanf@swdc.stratus.com.
+ echo i860-stratus-sysv4
+ exit ;;
+ i*86:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo ${UNAME_MACHINE}-stratus-vos
+ exit ;;
+ *:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo hppa1.1-stratus-vos
+ exit ;;
+ mc68*:A/UX:*:*)
+ echo m68k-apple-aux${UNAME_RELEASE}
+ exit ;;
+ news*:NEWS-OS:6*:*)
+ echo mips-sony-newsos6
+ exit ;;
+ R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+ if [ -d /usr/nec ]; then
+ echo mips-nec-sysv${UNAME_RELEASE}
+ else
+ echo mips-unknown-sysv${UNAME_RELEASE}
+ fi
+ exit ;;
+ BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
+ echo powerpc-be-beos
+ exit ;;
+ BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
+ echo powerpc-apple-beos
+ exit ;;
+ BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
+ echo i586-pc-beos
+ exit ;;
+ BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
+ echo i586-pc-haiku
+ exit ;;
+ SX-4:SUPER-UX:*:*)
+ echo sx4-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-5:SUPER-UX:*:*)
+ echo sx5-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-6:SUPER-UX:*:*)
+ echo sx6-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-7:SUPER-UX:*:*)
+ echo sx7-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8:SUPER-UX:*:*)
+ echo sx8-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8R:SUPER-UX:*:*)
+ echo sx8r-nec-superux${UNAME_RELEASE}
+ exit ;;
+ Power*:Rhapsody:*:*)
+ echo powerpc-apple-rhapsody${UNAME_RELEASE}
+ exit ;;
+ *:Rhapsody:*:*)
+ echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+ exit ;;
+ *:Darwin:*:*)
+ UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+ case $UNAME_PROCESSOR in
+ i386)
+ eval $set_cc_for_build
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ UNAME_PROCESSOR="x86_64"
+ fi
+ fi ;;
+ unknown) UNAME_PROCESSOR=powerpc ;;
+ esac
+ echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+ exit ;;
+ *:procnto*:*:* | *:QNX:[0123456789]*:*)
+ UNAME_PROCESSOR=`uname -p`
+ if test "$UNAME_PROCESSOR" = "x86"; then
+ UNAME_PROCESSOR=i386
+ UNAME_MACHINE=pc
+ fi
+ echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+ exit ;;
+ *:QNX:*:4*)
+ echo i386-pc-qnx
+ exit ;;
+ NEO-?:NONSTOP_KERNEL:*:*)
+ echo neo-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ NSE-?:NONSTOP_KERNEL:*:*)
+ echo nse-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ NSR-?:NONSTOP_KERNEL:*:*)
+ echo nsr-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ *:NonStop-UX:*:*)
+ echo mips-compaq-nonstopux
+ exit ;;
+ BS2000:POSIX*:*:*)
+ echo bs2000-siemens-sysv
+ exit ;;
+ DS/*:UNIX_System_V:*:*)
+ echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+ exit ;;
+ *:Plan9:*:*)
+ # "uname -m" is not consistent, so use $cputype instead. 386
+ # is converted to i386 for consistency with other x86
+ # operating systems.
+ if test "$cputype" = "386"; then
+ UNAME_MACHINE=i386
+ else
+ UNAME_MACHINE="$cputype"
+ fi
+ echo ${UNAME_MACHINE}-unknown-plan9
+ exit ;;
+ *:TOPS-10:*:*)
+ echo pdp10-unknown-tops10
+ exit ;;
+ *:TENEX:*:*)
+ echo pdp10-unknown-tenex
+ exit ;;
+ KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+ echo pdp10-dec-tops20
+ exit ;;
+ XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+ echo pdp10-xkl-tops20
+ exit ;;
+ *:TOPS-20:*:*)
+ echo pdp10-unknown-tops20
+ exit ;;
+ *:ITS:*:*)
+ echo pdp10-unknown-its
+ exit ;;
+ SEI:*:*:SEIUX)
+ echo mips-sei-seiux${UNAME_RELEASE}
+ exit ;;
+ *:DragonFly:*:*)
+ echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+ exit ;;
+ *:*VMS:*:*)
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ case "${UNAME_MACHINE}" in
+ A*) echo alpha-dec-vms ; exit ;;
+ I*) echo ia64-dec-vms ; exit ;;
+ V*) echo vax-dec-vms ; exit ;;
+ esac ;;
+ *:XENIX:*:SysV)
+ echo i386-pc-xenix
+ exit ;;
+ i*86:skyos:*:*)
+ echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+ exit ;;
+ i*86:rdos:*:*)
+ echo ${UNAME_MACHINE}-pc-rdos
+ exit ;;
+ i*86:AROS:*:*)
+ echo ${UNAME_MACHINE}-pc-aros
+ exit ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+eval $set_cc_for_build
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+ /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
+ I don't know.... */
+ printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+ printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+ "4"
+#else
+ ""
+#endif
+ ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+ printf ("arm-acorn-riscix\n"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+ printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+ int version;
+ version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+ if (version < 4)
+ printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+ else
+ printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+ exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+ printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+ printf ("ns32k-encore-mach\n"); exit (0);
+#else
+ printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+ printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+ printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+ printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+ struct utsname un;
+
+ uname(&un);
+
+ if (strncmp(un.version, "V2", 2) == 0) {
+ printf ("i386-sequent-ptx2\n"); exit (0);
+ }
+ if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+ printf ("i386-sequent-ptx1\n"); exit (0);
+ }
+ printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+# if !defined (ultrix)
+# include <sys/param.h>
+# if defined (BSD)
+# if BSD == 43
+ printf ("vax-dec-bsd4.3\n"); exit (0);
+# else
+# if BSD == 199006
+ printf ("vax-dec-bsd4.3reno\n"); exit (0);
+# else
+ printf ("vax-dec-bsd\n"); exit (0);
+# endif
+# endif
+# else
+ printf ("vax-dec-bsd\n"); exit (0);
+# endif
+# else
+ printf ("vax-dec-ultrix\n"); exit (0);
+# endif
+#endif
+
+#if defined (alliant) && defined (i860)
+ printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+ exit (1);
+}
+EOF
+
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+ { echo "$SYSTEM_NAME"; exit; }
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+ case `getsysinfo -f cpu_type` in
+ c1*)
+ echo c1-convex-bsd
+ exit ;;
+ c2*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit ;;
+ c34*)
+ echo c34-convex-bsd
+ exit ;;
+ c38*)
+ echo c38-convex-bsd
+ exit ;;
+ c4*)
+ echo c4-convex-bsd
+ exit ;;
+ esac
+fi
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+and
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo = `(hostinfo) 2>/dev/null`
+/bin/universe = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
--- /dev/null
+#! /bin/sh
+# Configuration validation subroutine script.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
+# 2011 Free Software Foundation, Inc.
+
+timestamp='2011-03-23'
+
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine. It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Please send patches to <config-patches@gnu.org>. Submit a context
+# diff and a properly formatted GNU ChangeLog entry.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support. The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+ $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free
+Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit ;;
+ --version | -v )
+ echo "$version" ; exit ;;
+ --help | --h* | -h )
+ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help"
+ exit 1 ;;
+
+ *local*)
+ # First pass through any local machine types.
+ echo $1
+ exit ;;
+
+ * )
+ break ;;
+ esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+ exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+ exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+ nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
+ linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+ knetbsd*-gnu* | netbsd*-gnu* | \
+ kopensolaris*-gnu* | \
+ storm-chaos* | os2-emx* | rtmk-nova*)
+ os=-$maybe_os
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ ;;
+ *)
+ basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+ if [ $basic_machine != $1 ]
+ then os=`echo $1 | sed 's/.*-/-/'`
+ else os=; fi
+ ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work. We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+ -sun*os*)
+ # Prevent following clause from handling this invalid input.
+ ;;
+ -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+ -apple | -axis | -knuth | -cray | -microblaze)
+ os=
+ basic_machine=$1
+ ;;
+ -bluegene*)
+ os=-cnk
+ ;;
+ -sim | -cisco | -oki | -wec | -winbond)
+ os=
+ basic_machine=$1
+ ;;
+ -scout)
+ ;;
+ -wrs)
+ os=-vxworks
+ basic_machine=$1
+ ;;
+ -chorusos*)
+ os=-chorusos
+ basic_machine=$1
+ ;;
+ -chorusrdb)
+ os=-chorusrdb
+ basic_machine=$1
+ ;;
+ -hiux*)
+ os=-hiuxwe2
+ ;;
+ -sco6)
+ os=-sco5v6
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco5)
+ os=-sco3.2v5
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco4)
+ os=-sco3.2v4
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2.[4-9]*)
+ os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2v[4-9]*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco5v6*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco*)
+ os=-sco3.2v2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -udk*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -isc)
+ os=-isc2.2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -clix*)
+ basic_machine=clipper-intergraph
+ ;;
+ -isc*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -lynx*)
+ os=-lynxos
+ ;;
+ -ptx*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+ ;;
+ -windowsnt*)
+ os=`echo $os | sed -e 's/windowsnt/winnt/'`
+ ;;
+ -psos*)
+ os=-psos
+ ;;
+ -mint | -mint[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+ # Recognize the basic CPU types without company name.
+ # Some are omitted here because they have special meanings below.
+ 1750a | 580 \
+ | a29k \
+ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+ | am33_2.0 \
+ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+ | bfin \
+ | c4x | clipper \
+ | d10v | d30v | dlx | dsp16xx \
+ | fido | fr30 | frv \
+ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+ | i370 | i860 | i960 | ia64 \
+ | ip2k | iq2000 \
+ | lm32 \
+ | m32c | m32r | m32rle | m68000 | m68k | m88k \
+ | maxq | mb | microblaze | mcore | mep | metag \
+ | mips | mipsbe | mipseb | mipsel | mipsle \
+ | mips16 \
+ | mips64 | mips64el \
+ | mips64octeon | mips64octeonel \
+ | mips64orion | mips64orionel \
+ | mips64r5900 | mips64r5900el \
+ | mips64vr | mips64vrel \
+ | mips64vr4100 | mips64vr4100el \
+ | mips64vr4300 | mips64vr4300el \
+ | mips64vr5000 | mips64vr5000el \
+ | mips64vr5900 | mips64vr5900el \
+ | mipsisa32 | mipsisa32el \
+ | mipsisa32r2 | mipsisa32r2el \
+ | mipsisa64 | mipsisa64el \
+ | mipsisa64r2 | mipsisa64r2el \
+ | mipsisa64sb1 | mipsisa64sb1el \
+ | mipsisa64sr71k | mipsisa64sr71kel \
+ | mipstx39 | mipstx39el \
+ | mn10200 | mn10300 \
+ | moxie \
+ | mt \
+ | msp430 \
+ | nds32 | nds32le | nds32be \
+ | nios | nios2 \
+ | ns16k | ns32k \
+ | open8 \
+ | or32 \
+ | pdp10 | pdp11 | pj | pjl \
+ | powerpc | powerpc64 | powerpc64le | powerpcle \
+ | pyramid \
+ | rx \
+ | score \
+ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+ | sh64 | sh64le \
+ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+ | spu \
+ | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
+ | ubicom32 \
+ | v850 | v850e \
+ | we32k \
+ | x86 | xc16x | xstormy16 | xtensa \
+ | z8k | z80)
+ basic_machine=$basic_machine-unknown
+ ;;
+ c54x)
+ basic_machine=tic54x-unknown
+ ;;
+ c55x)
+ basic_machine=tic55x-unknown
+ ;;
+ c6x)
+ basic_machine=tic6x-unknown
+ ;;
+ m6811 | m68hc11 | m6812 | m68hc12 | picochip)
+ # Motorola 68HC11/12.
+ basic_machine=$basic_machine-unknown
+ os=-none
+ ;;
+ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+ ;;
+ ms1)
+ basic_machine=mt-unknown
+ ;;
+
+ strongarm | thumb | xscale)
+ basic_machine=arm-unknown
+ ;;
+
+ xscaleeb)
+ basic_machine=armeb-unknown
+ ;;
+
+ xscaleel)
+ basic_machine=armel-unknown
+ ;;
+
+ # We use `pc' rather than `unknown'
+ # because (1) that's what they normally are, and
+ # (2) the word "unknown" tends to confuse beginning users.
+ i*86 | x86_64)
+ basic_machine=$basic_machine-pc
+ ;;
+ # Object if more than one company name word.
+ *-*-*)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+ # Recognize the basic CPU types with company name.
+ 580-* \
+ | a29k-* \
+ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
+ | avr-* | avr32-* \
+ | bfin-* | bs2000-* \
+ | c[123]* | c30-* | [cjt]90-* | c4x-* \
+ | clipper-* | craynv-* | cydra-* \
+ | d10v-* | d30v-* | dlx-* \
+ | elxsi-* \
+ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
+ | h8300-* | h8500-* \
+ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+ | i*86-* | i860-* | i960-* | ia64-* \
+ | ip2k-* | iq2000-* \
+ | lm32-* \
+ | m32c-* | m32r-* | m32rle-* \
+ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
+ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+ | mips16-* \
+ | mips64-* | mips64el-* \
+ | mips64octeon-* | mips64octeonel-* \
+ | mips64orion-* | mips64orionel-* \
+ | mips64r5900-* | mips64r5900el-* \
+ | mips64vr-* | mips64vrel-* \
+ | mips64vr4100-* | mips64vr4100el-* \
+ | mips64vr4300-* | mips64vr4300el-* \
+ | mips64vr5000-* | mips64vr5000el-* \
+ | mips64vr5900-* | mips64vr5900el-* \
+ | mipsisa32-* | mipsisa32el-* \
+ | mipsisa32r2-* | mipsisa32r2el-* \
+ | mipsisa64-* | mipsisa64el-* \
+ | mipsisa64r2-* | mipsisa64r2el-* \
+ | mipsisa64sb1-* | mipsisa64sb1el-* \
+ | mipsisa64sr71k-* | mipsisa64sr71kel-* \
+ | mipstx39-* | mipstx39el-* \
+ | mmix-* \
+ | mt-* \
+ | msp430-* \
+ | nds32-* | nds32le-* | nds32be-* \
+ | nios-* | nios2-* \
+ | none-* | np1-* | ns16k-* | ns32k-* \
+ | open8-* \
+ | orion-* \
+ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
+ | pyramid-* \
+ | romp-* | rs6000-* | rx-* \
+ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+ | sparclite-* \
+ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
+ | tahoe-* \
+ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+ | tile-* | tilegx-* \
+ | tron-* \
+ | ubicom32-* \
+ | v850-* | v850e-* | vax-* \
+ | we32k-* \
+ | x86-* | x86_64-* | xc16x-* | xps100-* \
+ | xstormy16-* | xtensa*-* \
+ | ymp-* \
+ | z8k-* | z80-*)
+ ;;
+ # Recognize the basic CPU types without company name, with glob match.
+ xtensa*)
+ basic_machine=$basic_machine-unknown
+ ;;
+ # Recognize the various machine names and aliases which stand
+ # for a CPU type and a company and sometimes even an OS.
+ 386bsd)
+ basic_machine=i386-unknown
+ os=-bsd
+ ;;
+ 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+ basic_machine=m68000-att
+ ;;
+ 3b*)
+ basic_machine=we32k-att
+ ;;
+ a29khif)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ abacus)
+ basic_machine=abacus-unknown
+ ;;
+ adobe68k)
+ basic_machine=m68010-adobe
+ os=-scout
+ ;;
+ alliant | fx80)
+ basic_machine=fx80-alliant
+ ;;
+ altos | altos3068)
+ basic_machine=m68k-altos
+ ;;
+ am29k)
+ basic_machine=a29k-none
+ os=-bsd
+ ;;
+ amd64)
+ basic_machine=x86_64-pc
+ ;;
+ amd64-*)
+ basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ amdahl)
+ basic_machine=580-amdahl
+ os=-sysv
+ ;;
+ amiga | amiga-*)
+ basic_machine=m68k-unknown
+ ;;
+ amigaos | amigados)
+ basic_machine=m68k-unknown
+ os=-amigaos
+ ;;
+ amigaunix | amix)
+ basic_machine=m68k-unknown
+ os=-sysv4
+ ;;
+ apollo68)
+ basic_machine=m68k-apollo
+ os=-sysv
+ ;;
+ apollo68bsd)
+ basic_machine=m68k-apollo
+ os=-bsd
+ ;;
+ aros)
+ basic_machine=i386-pc
+ os=-aros
+ ;;
+ aux)
+ basic_machine=m68k-apple
+ os=-aux
+ ;;
+ balance)
+ basic_machine=ns32k-sequent
+ os=-dynix
+ ;;
+ blackfin)
+ basic_machine=bfin-unknown
+ os=-linux
+ ;;
+ blackfin-*)
+ basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ bluegene*)
+ basic_machine=powerpc-ibm
+ os=-cnk
+ ;;
+ c54x-*)
+ basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c55x-*)
+ basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c6x-*)
+ basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c90)
+ basic_machine=c90-cray
+ os=-unicos
+ ;;
+ cegcc)
+ basic_machine=arm-unknown
+ os=-cegcc
+ ;;
+ convex-c1)
+ basic_machine=c1-convex
+ os=-bsd
+ ;;
+ convex-c2)
+ basic_machine=c2-convex
+ os=-bsd
+ ;;
+ convex-c32)
+ basic_machine=c32-convex
+ os=-bsd
+ ;;
+ convex-c34)
+ basic_machine=c34-convex
+ os=-bsd
+ ;;
+ convex-c38)
+ basic_machine=c38-convex
+ os=-bsd
+ ;;
+ cray | j90)
+ basic_machine=j90-cray
+ os=-unicos
+ ;;
+ craynv)
+ basic_machine=craynv-cray
+ os=-unicosmp
+ ;;
+ cr16 | cr16-*)
+ basic_machine=cr16-unknown
+ os=-elf
+ ;;
+ crds | unos)
+ basic_machine=m68k-crds
+ ;;
+ crisv32 | crisv32-* | etraxfs*)
+ basic_machine=crisv32-axis
+ ;;
+ cris | cris-* | etrax*)
+ basic_machine=cris-axis
+ ;;
+ crx)
+ basic_machine=crx-unknown
+ os=-elf
+ ;;
+ da30 | da30-*)
+ basic_machine=m68k-da30
+ ;;
+ decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+ basic_machine=mips-dec
+ ;;
+ decsystem10* | dec10*)
+ basic_machine=pdp10-dec
+ os=-tops10
+ ;;
+ decsystem20* | dec20*)
+ basic_machine=pdp10-dec
+ os=-tops20
+ ;;
+ delta | 3300 | motorola-3300 | motorola-delta \
+ | 3300-motorola | delta-motorola)
+ basic_machine=m68k-motorola
+ ;;
+ delta88)
+ basic_machine=m88k-motorola
+ os=-sysv3
+ ;;
+ dicos)
+ basic_machine=i686-pc
+ os=-dicos
+ ;;
+ djgpp)
+ basic_machine=i586-pc
+ os=-msdosdjgpp
+ ;;
+ dpx20 | dpx20-*)
+ basic_machine=rs6000-bull
+ os=-bosx
+ ;;
+ dpx2* | dpx2*-bull)
+ basic_machine=m68k-bull
+ os=-sysv3
+ ;;
+ ebmon29k)
+ basic_machine=a29k-amd
+ os=-ebmon
+ ;;
+ elxsi)
+ basic_machine=elxsi-elxsi
+ os=-bsd
+ ;;
+ encore | umax | mmax)
+ basic_machine=ns32k-encore
+ ;;
+ es1800 | OSE68k | ose68k | ose | OSE)
+ basic_machine=m68k-ericsson
+ os=-ose
+ ;;
+ fx2800)
+ basic_machine=i860-alliant
+ ;;
+ genix)
+ basic_machine=ns32k-ns
+ ;;
+ gmicro)
+ basic_machine=tron-gmicro
+ os=-sysv
+ ;;
+ go32)
+ basic_machine=i386-pc
+ os=-go32
+ ;;
+ h3050r* | hiux*)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ h8300hms)
+ basic_machine=h8300-hitachi
+ os=-hms
+ ;;
+ h8300xray)
+ basic_machine=h8300-hitachi
+ os=-xray
+ ;;
+ h8500hms)
+ basic_machine=h8500-hitachi
+ os=-hms
+ ;;
+ harris)
+ basic_machine=m88k-harris
+ os=-sysv3
+ ;;
+ hp300-*)
+ basic_machine=m68k-hp
+ ;;
+ hp300bsd)
+ basic_machine=m68k-hp
+ os=-bsd
+ ;;
+ hp300hpux)
+ basic_machine=m68k-hp
+ os=-hpux
+ ;;
+ hp3k9[0-9][0-9] | hp9[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k2[0-9][0-9] | hp9k31[0-9])
+ basic_machine=m68000-hp
+ ;;
+ hp9k3[2-9][0-9])
+ basic_machine=m68k-hp
+ ;;
+ hp9k6[0-9][0-9] | hp6[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k7[0-79][0-9] | hp7[0-79][0-9])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k78[0-9] | hp78[0-9])
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][13679] | hp8[0-9][13679])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][0-9] | hp8[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hppa-next)
+ os=-nextstep3
+ ;;
+ hppaosf)
+ basic_machine=hppa1.1-hp
+ os=-osf
+ ;;
+ hppro)
+ basic_machine=hppa1.1-hp
+ os=-proelf
+ ;;
+ i370-ibm* | ibm*)
+ basic_machine=i370-ibm
+ ;;
+# I'm not sure what "Sysv32" means. Should this be sysv3.2?
+ i*86v32)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv32
+ ;;
+ i*86v4*)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv4
+ ;;
+ i*86v)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv
+ ;;
+ i*86sol2)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-solaris2
+ ;;
+ i386mach)
+ basic_machine=i386-mach
+ os=-mach
+ ;;
+ i386-vsta | vsta)
+ basic_machine=i386-unknown
+ os=-vsta
+ ;;
+ iris | iris4d)
+ basic_machine=mips-sgi
+ case $os in
+ -irix*)
+ ;;
+ *)
+ os=-irix4
+ ;;
+ esac
+ ;;
+ isi68 | isi)
+ basic_machine=m68k-isi
+ os=-sysv
+ ;;
+ m68knommu)
+ basic_machine=m68k-unknown
+ os=-linux
+ ;;
+ m68knommu-*)
+ basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ m88k-omron*)
+ basic_machine=m88k-omron
+ ;;
+ magnum | m3230)
+ basic_machine=mips-mips
+ os=-sysv
+ ;;
+ merlin)
+ basic_machine=ns32k-utek
+ os=-sysv
+ ;;
+ microblaze)
+ basic_machine=microblaze-xilinx
+ ;;
+ mingw32)
+ basic_machine=i386-pc
+ os=-mingw32
+ ;;
+ mingw32ce)
+ basic_machine=arm-unknown
+ os=-mingw32ce
+ ;;
+ miniframe)
+ basic_machine=m68000-convergent
+ ;;
+ *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+ mips3*-*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+ ;;
+ mips3*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+ ;;
+ monitor)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ morphos)
+ basic_machine=powerpc-unknown
+ os=-morphos
+ ;;
+ msdos)
+ basic_machine=i386-pc
+ os=-msdos
+ ;;
+ ms1-*)
+ basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+ ;;
+ mvs)
+ basic_machine=i370-ibm
+ os=-mvs
+ ;;
+ ncr3000)
+ basic_machine=i486-ncr
+ os=-sysv4
+ ;;
+ netbsd386)
+ basic_machine=i386-unknown
+ os=-netbsd
+ ;;
+ netwinder)
+ basic_machine=armv4l-rebel
+ os=-linux
+ ;;
+ news | news700 | news800 | news900)
+ basic_machine=m68k-sony
+ os=-newsos
+ ;;
+ news1000)
+ basic_machine=m68030-sony
+ os=-newsos
+ ;;
+ news-3600 | risc-news)
+ basic_machine=mips-sony
+ os=-newsos
+ ;;
+ necv70)
+ basic_machine=v70-nec
+ os=-sysv
+ ;;
+ next | m*-next )
+ basic_machine=m68k-next
+ case $os in
+ -nextstep* )
+ ;;
+ -ns2*)
+ os=-nextstep2
+ ;;
+ *)
+ os=-nextstep3
+ ;;
+ esac
+ ;;
+ nh3000)
+ basic_machine=m68k-harris
+ os=-cxux
+ ;;
+ nh[45]000)
+ basic_machine=m88k-harris
+ os=-cxux
+ ;;
+ nindy960)
+ basic_machine=i960-intel
+ os=-nindy
+ ;;
+ mon960)
+ basic_machine=i960-intel
+ os=-mon960
+ ;;
+ nonstopux)
+ basic_machine=mips-compaq
+ os=-nonstopux
+ ;;
+ np1)
+ basic_machine=np1-gould
+ ;;
+ neo-tandem)
+ basic_machine=neo-tandem
+ ;;
+ nse-tandem)
+ basic_machine=nse-tandem
+ ;;
+ nsr-tandem)
+ basic_machine=nsr-tandem
+ ;;
+ op50n-* | op60c-*)
+ basic_machine=hppa1.1-oki
+ os=-proelf
+ ;;
+ openrisc | openrisc-*)
+ basic_machine=or32-unknown
+ ;;
+ os400)
+ basic_machine=powerpc-ibm
+ os=-os400
+ ;;
+ OSE68000 | ose68000)
+ basic_machine=m68000-ericsson
+ os=-ose
+ ;;
+ os68k)
+ basic_machine=m68k-none
+ os=-os68k
+ ;;
+ pa-hitachi)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ paragon)
+ basic_machine=i860-intel
+ os=-osf
+ ;;
+ parisc)
+ basic_machine=hppa-unknown
+ os=-linux
+ ;;
+ parisc-*)
+ basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ pbd)
+ basic_machine=sparc-tti
+ ;;
+ pbb)
+ basic_machine=m68k-tti
+ ;;
+ pc532 | pc532-*)
+ basic_machine=ns32k-pc532
+ ;;
+ pc98)
+ basic_machine=i386-pc
+ ;;
+ pc98-*)
+ basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentium | p5 | k5 | k6 | nexgen | viac3)
+ basic_machine=i586-pc
+ ;;
+ pentiumpro | p6 | 6x86 | athlon | athlon_*)
+ basic_machine=i686-pc
+ ;;
+ pentiumii | pentium2 | pentiumiii | pentium3)
+ basic_machine=i686-pc
+ ;;
+ pentium4)
+ basic_machine=i786-pc
+ ;;
+ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+ basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumpro-* | p6-* | 6x86-* | athlon-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentium4-*)
+ basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pn)
+ basic_machine=pn-gould
+ ;;
+ power) basic_machine=power-ibm
+ ;;
+ ppc | ppcbe) basic_machine=powerpc-unknown
+ ;;
+ ppc-* | ppcbe-*)
+ basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppcle | powerpclittle | ppc-le | powerpc-little)
+ basic_machine=powerpcle-unknown
+ ;;
+ ppcle-* | powerpclittle-*)
+ basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64) basic_machine=powerpc64-unknown
+ ;;
+ ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+ basic_machine=powerpc64le-unknown
+ ;;
+ ppc64le-* | powerpc64little-*)
+ basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ps2)
+ basic_machine=i386-ibm
+ ;;
+ pw32)
+ basic_machine=i586-unknown
+ os=-pw32
+ ;;
+ rdos)
+ basic_machine=i386-pc
+ os=-rdos
+ ;;
+ rom68k)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ rm[46]00)
+ basic_machine=mips-siemens
+ ;;
+ rtpc | rtpc-*)
+ basic_machine=romp-ibm
+ ;;
+ s390 | s390-*)
+ basic_machine=s390-ibm
+ ;;
+ s390x | s390x-*)
+ basic_machine=s390x-ibm
+ ;;
+ sa29200)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ sb1)
+ basic_machine=mipsisa64sb1-unknown
+ ;;
+ sb1el)
+ basic_machine=mipsisa64sb1el-unknown
+ ;;
+ sde)
+ basic_machine=mipsisa32-sde
+ os=-elf
+ ;;
+ sei)
+ basic_machine=mips-sei
+ os=-seiux
+ ;;
+ sequent)
+ basic_machine=i386-sequent
+ ;;
+ sh)
+ basic_machine=sh-hitachi
+ os=-hms
+ ;;
+ sh5el)
+ basic_machine=sh5le-unknown
+ ;;
+ sh64)
+ basic_machine=sh64-unknown
+ ;;
+ sparclite-wrs | simso-wrs)
+ basic_machine=sparclite-wrs
+ os=-vxworks
+ ;;
+ sps7)
+ basic_machine=m68k-bull
+ os=-sysv2
+ ;;
+ spur)
+ basic_machine=spur-unknown
+ ;;
+ st2000)
+ basic_machine=m68k-tandem
+ ;;
+ stratus)
+ basic_machine=i860-stratus
+ os=-sysv4
+ ;;
+ strongarm-* | thumb-*)
+ basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ sun2)
+ basic_machine=m68000-sun
+ ;;
+ sun2os3)
+ basic_machine=m68000-sun
+ os=-sunos3
+ ;;
+ sun2os4)
+ basic_machine=m68000-sun
+ os=-sunos4
+ ;;
+ sun3os3)
+ basic_machine=m68k-sun
+ os=-sunos3
+ ;;
+ sun3os4)
+ basic_machine=m68k-sun
+ os=-sunos4
+ ;;
+ sun4os3)
+ basic_machine=sparc-sun
+ os=-sunos3
+ ;;
+ sun4os4)
+ basic_machine=sparc-sun
+ os=-sunos4
+ ;;
+ sun4sol2)
+ basic_machine=sparc-sun
+ os=-solaris2
+ ;;
+ sun3 | sun3-*)
+ basic_machine=m68k-sun
+ ;;
+ sun4)
+ basic_machine=sparc-sun
+ ;;
+ sun386 | sun386i | roadrunner)
+ basic_machine=i386-sun
+ ;;
+ sv1)
+ basic_machine=sv1-cray
+ os=-unicos
+ ;;
+ symmetry)
+ basic_machine=i386-sequent
+ os=-dynix
+ ;;
+ t3e)
+ basic_machine=alphaev5-cray
+ os=-unicos
+ ;;
+ t90)
+ basic_machine=t90-cray
+ os=-unicos
+ ;;
+ # This must be matched before tile*.
+ tilegx*)
+ basic_machine=tilegx-unknown
+ os=-linux-gnu
+ ;;
+ tile*)
+ basic_machine=tile-unknown
+ os=-linux-gnu
+ ;;
+ tx39)
+ basic_machine=mipstx39-unknown
+ ;;
+ tx39el)
+ basic_machine=mipstx39el-unknown
+ ;;
+ toad1)
+ basic_machine=pdp10-xkl
+ os=-tops20
+ ;;
+ tower | tower-32)
+ basic_machine=m68k-ncr
+ ;;
+ tpf)
+ basic_machine=s390x-ibm
+ os=-tpf
+ ;;
+ udi29k)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ ultra3)
+ basic_machine=a29k-nyu
+ os=-sym1
+ ;;
+ v810 | necv810)
+ basic_machine=v810-nec
+ os=-none
+ ;;
+ vaxv)
+ basic_machine=vax-dec
+ os=-sysv
+ ;;
+ vms)
+ basic_machine=vax-dec
+ os=-vms
+ ;;
+ vpp*|vx|vx-*)
+ basic_machine=f301-fujitsu
+ ;;
+ vxworks960)
+ basic_machine=i960-wrs
+ os=-vxworks
+ ;;
+ vxworks68)
+ basic_machine=m68k-wrs
+ os=-vxworks
+ ;;
+ vxworks29k)
+ basic_machine=a29k-wrs
+ os=-vxworks
+ ;;
+ w65*)
+ basic_machine=w65-wdc
+ os=-none
+ ;;
+ w89k-*)
+ basic_machine=hppa1.1-winbond
+ os=-proelf
+ ;;
+ xbox)
+ basic_machine=i686-pc
+ os=-mingw32
+ ;;
+ xps | xps100)
+ basic_machine=xps100-honeywell
+ ;;
+ xscale-* | xscalee[bl]-*)
+ basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
+ ;;
+ ymp)
+ basic_machine=ymp-cray
+ os=-unicos
+ ;;
+ z8k-*-coff)
+ basic_machine=z8k-unknown
+ os=-sim
+ ;;
+ z80-*-coff)
+ basic_machine=z80-unknown
+ os=-sim
+ ;;
+ none)
+ basic_machine=none-none
+ os=-none
+ ;;
+
+# Here we handle the default manufacturer of certain CPU types. It is in
+# some cases the only manufacturer, in others, it is the most popular.
+ w89k)
+ basic_machine=hppa1.1-winbond
+ ;;
+ op50n)
+ basic_machine=hppa1.1-oki
+ ;;
+ op60c)
+ basic_machine=hppa1.1-oki
+ ;;
+ romp)
+ basic_machine=romp-ibm
+ ;;
+ mmix)
+ basic_machine=mmix-knuth
+ ;;
+ rs6000)
+ basic_machine=rs6000-ibm
+ ;;
+ vax)
+ basic_machine=vax-dec
+ ;;
+ pdp10)
+ # there are many clones, so DEC is not a safe bet
+ basic_machine=pdp10-unknown
+ ;;
+ pdp11)
+ basic_machine=pdp11-dec
+ ;;
+ we32k)
+ basic_machine=we32k-att
+ ;;
+ sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
+ basic_machine=sh-unknown
+ ;;
+ sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
+ basic_machine=sparc-sun
+ ;;
+ cydra)
+ basic_machine=cydra-cydrome
+ ;;
+ orion)
+ basic_machine=orion-highlevel
+ ;;
+ orion105)
+ basic_machine=clipper-highlevel
+ ;;
+ mac | mpw | mac-mpw)
+ basic_machine=m68k-apple
+ ;;
+ pmac | pmac-mpw)
+ basic_machine=powerpc-apple
+ ;;
+ *-unknown)
+ # Make sure to match an already-canonicalized machine name.
+ ;;
+ *)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+ *-digital*)
+ basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+ ;;
+ *-commodore*)
+ basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+ ;;
+ *)
+ ;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+ # First match some system type aliases
+ # that might get confused with valid system types.
+ # -solaris* is a basic system type, with this one exception.
+ -auroraux)
+ os=-auroraux
+ ;;
+ -solaris1 | -solaris1.*)
+ os=`echo $os | sed -e 's|solaris1|sunos4|'`
+ ;;
+ -solaris)
+ os=-solaris2
+ ;;
+ -svr4*)
+ os=-sysv4
+ ;;
+ -unixware*)
+ os=-sysv4.2uw
+ ;;
+ -gnu/linux*)
+ os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+ ;;
+ # First accept the basic system types.
+ # The portable systems comes first.
+ # Each alternative MUST END IN A *, to match a version number.
+ # -sysv* is not here because it comes later, after sysvr4.
+ -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
+ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
+ | -sym* | -kopensolaris* \
+ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+ | -aos* | -aros* \
+ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+ | -openbsd* | -solidbsd* \
+ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+ | -chorusos* | -chorusrdb* | -cegcc* \
+ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+ | -mingw32* | -linux-gnu* | -linux-android* \
+ | -linux-newlib* | -linux-uclibc* \
+ | -uxpv* | -beos* | -mpeix* | -udk* \
+ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
+ # Remember, each alternative MUST END IN *, to match a version number.
+ ;;
+ -qnx*)
+ case $basic_machine in
+ x86-* | i*86-*)
+ ;;
+ *)
+ os=-nto$os
+ ;;
+ esac
+ ;;
+ -nto-qnx*)
+ ;;
+ -nto*)
+ os=`echo $os | sed -e 's|nto|nto-qnx|'`
+ ;;
+ -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+ ;;
+ -mac*)
+ os=`echo $os | sed -e 's|mac|macos|'`
+ ;;
+ -linux-dietlibc)
+ os=-linux-dietlibc
+ ;;
+ -linux*)
+ os=`echo $os | sed -e 's|linux|linux-gnu|'`
+ ;;
+ -sunos5*)
+ os=`echo $os | sed -e 's|sunos5|solaris2|'`
+ ;;
+ -sunos6*)
+ os=`echo $os | sed -e 's|sunos6|solaris3|'`
+ ;;
+ -opened*)
+ os=-openedition
+ ;;
+ -os400*)
+ os=-os400
+ ;;
+ -wince*)
+ os=-wince
+ ;;
+ -osfrose*)
+ os=-osfrose
+ ;;
+ -osf*)
+ os=-osf
+ ;;
+ -utek*)
+ os=-bsd
+ ;;
+ -dynix*)
+ os=-bsd
+ ;;
+ -acis*)
+ os=-aos
+ ;;
+ -atheos*)
+ os=-atheos
+ ;;
+ -syllable*)
+ os=-syllable
+ ;;
+ -386bsd)
+ os=-bsd
+ ;;
+ -ctix* | -uts*)
+ os=-sysv
+ ;;
+ -nova*)
+ os=-rtmk-nova
+ ;;
+ -ns2 )
+ os=-nextstep2
+ ;;
+ -nsk*)
+ os=-nsk
+ ;;
+ # Preserve the version number of sinix5.
+ -sinix5.*)
+ os=`echo $os | sed -e 's|sinix|sysv|'`
+ ;;
+ -sinix*)
+ os=-sysv4
+ ;;
+ -tpf*)
+ os=-tpf
+ ;;
+ -triton*)
+ os=-sysv3
+ ;;
+ -oss*)
+ os=-sysv3
+ ;;
+ -svr4)
+ os=-sysv4
+ ;;
+ -svr3)
+ os=-sysv3
+ ;;
+ -sysvr4)
+ os=-sysv4
+ ;;
+ # This must come after -sysvr4.
+ -sysv*)
+ ;;
+ -ose*)
+ os=-ose
+ ;;
+ -es1800*)
+ os=-ose
+ ;;
+ -xenix)
+ os=-xenix
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ os=-mint
+ ;;
+ -aros*)
+ os=-aros
+ ;;
+ -kaos*)
+ os=-kaos
+ ;;
+ -zvmoe)
+ os=-zvmoe
+ ;;
+ -dicos*)
+ os=-dicos
+ ;;
+ -nacl*)
+ ;;
+ -none)
+ ;;
+ *)
+ # Get rid of the `-' at the beginning of $os.
+ os=`echo $os | sed 's/[^-]*-//'`
+ echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system. Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+ score-*)
+ os=-elf
+ ;;
+ spu-*)
+ os=-elf
+ ;;
+ *-acorn)
+ os=-riscix1.2
+ ;;
+ arm*-rebel)
+ os=-linux
+ ;;
+ arm*-semi)
+ os=-aout
+ ;;
+ c4x-* | tic4x-*)
+ os=-coff
+ ;;
+ tic54x-*)
+ os=-coff
+ ;;
+ tic55x-*)
+ os=-coff
+ ;;
+ tic6x-*)
+ os=-coff
+ ;;
+ # This must come before the *-dec entry.
+ pdp10-*)
+ os=-tops20
+ ;;
+ pdp11-*)
+ os=-none
+ ;;
+ *-dec | vax-*)
+ os=-ultrix4.2
+ ;;
+ m68*-apollo)
+ os=-domain
+ ;;
+ i386-sun)
+ os=-sunos4.0.2
+ ;;
+ m68000-sun)
+ os=-sunos3
+ # This also exists in the configure program, but was not the
+ # default.
+ # os=-sunos4
+ ;;
+ m68*-cisco)
+ os=-aout
+ ;;
+ mep-*)
+ os=-elf
+ ;;
+ mips*-cisco)
+ os=-elf
+ ;;
+ mips*-*)
+ os=-elf
+ ;;
+ or32-*)
+ os=-coff
+ ;;
+ *-tti) # must be before sparc entry or we get the wrong os.
+ os=-sysv3
+ ;;
+ sparc-* | *-sun)
+ os=-sunos4.1.1
+ ;;
+ *-be)
+ os=-beos
+ ;;
+ *-haiku)
+ os=-haiku
+ ;;
+ *-ibm)
+ os=-aix
+ ;;
+ *-knuth)
+ os=-mmixware
+ ;;
+ *-wec)
+ os=-proelf
+ ;;
+ *-winbond)
+ os=-proelf
+ ;;
+ *-oki)
+ os=-proelf
+ ;;
+ *-hp)
+ os=-hpux
+ ;;
+ *-hitachi)
+ os=-hiux
+ ;;
+ i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+ os=-sysv
+ ;;
+ *-cbm)
+ os=-amigaos
+ ;;
+ *-dg)
+ os=-dgux
+ ;;
+ *-dolphin)
+ os=-sysv3
+ ;;
+ m68k-ccur)
+ os=-rtu
+ ;;
+ m88k-omron*)
+ os=-luna
+ ;;
+ *-next )
+ os=-nextstep
+ ;;
+ *-sequent)
+ os=-ptx
+ ;;
+ *-crds)
+ os=-unos
+ ;;
+ *-ns)
+ os=-genix
+ ;;
+ i370-*)
+ os=-mvs
+ ;;
+ *-next)
+ os=-nextstep3
+ ;;
+ *-gould)
+ os=-sysv
+ ;;
+ *-highlevel)
+ os=-bsd
+ ;;
+ *-encore)
+ os=-bsd
+ ;;
+ *-sgi)
+ os=-irix
+ ;;
+ *-siemens)
+ os=-sysv4
+ ;;
+ *-masscomp)
+ os=-rtu
+ ;;
+ f30[01]-fujitsu | f700-fujitsu)
+ os=-uxpv
+ ;;
+ *-rom68k)
+ os=-coff
+ ;;
+ *-*bug)
+ os=-coff
+ ;;
+ *-apple)
+ os=-macos
+ ;;
+ *-atari*)
+ os=-mint
+ ;;
+ *)
+ os=-none
+ ;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer. We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+ *-unknown)
+ case $os in
+ -riscix*)
+ vendor=acorn
+ ;;
+ -sunos*)
+ vendor=sun
+ ;;
+ -cnk*|-aix*)
+ vendor=ibm
+ ;;
+ -beos*)
+ vendor=be
+ ;;
+ -hpux*)
+ vendor=hp
+ ;;
+ -mpeix*)
+ vendor=hp
+ ;;
+ -hiux*)
+ vendor=hitachi
+ ;;
+ -unos*)
+ vendor=crds
+ ;;
+ -dgux*)
+ vendor=dg
+ ;;
+ -luna*)
+ vendor=omron
+ ;;
+ -genix*)
+ vendor=ns
+ ;;
+ -mvs* | -opened*)
+ vendor=ibm
+ ;;
+ -os400*)
+ vendor=ibm
+ ;;
+ -ptx*)
+ vendor=sequent
+ ;;
+ -tpf*)
+ vendor=ibm
+ ;;
+ -vxsim* | -vxworks* | -windiss*)
+ vendor=wrs
+ ;;
+ -aux*)
+ vendor=apple
+ ;;
+ -hms*)
+ vendor=hitachi
+ ;;
+ -mpw* | -macos*)
+ vendor=apple
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ vendor=atari
+ ;;
+ -vos*)
+ vendor=stratus
+ ;;
+ esac
+ basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+ ;;
+esac
+
+echo $basic_machine$os
+exit
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
/* add to buffer and return */
if (i >= inl)
{
- memcpy(&(ctx->obuf[ctx->obuf_len]),in,inl);
+ memcpy(&(ctx->obuf[ctx->obuf_off+ctx->obuf_len]),in,inl);
ctx->obuf_len+=inl;
return(num+inl);
}
{
if (i > 0) /* lets fill it up if we can */
{
- memcpy(&(ctx->obuf[ctx->obuf_len]),in,i);
+ memcpy(&(ctx->obuf[ctx->obuf_off+ctx->obuf_len]),in,i);
in+=i;
inl-=i;
num+=i;
case BIO_C_GET_BUFF_NUM_LINES:
ret=0;
p1=ctx->ibuf;
- for (i=ctx->ibuf_off; i<ctx->ibuf_len; i++)
+ for (i=0; i<ctx->ibuf_len; i++)
{
- if (p1[i] == '\n') ret++;
+ if (p1[ctx->ibuf_off + i] == '\n') ret++;
}
break;
case BIO_CTRL_WPENDING:
for (;;)
{
BIO_clear_retry_flags(b);
- if (ctx->obuf_len > ctx->obuf_off)
+ if (ctx->obuf_len > 0)
{
r=BIO_write(b->next_bio,
&(ctx->obuf[ctx->obuf_off]),
- ctx->obuf_len-ctx->obuf_off);
+ ctx->obuf_len);
#if 0
-fprintf(stderr,"FLUSH [%3d] %3d -> %3d\n",ctx->obuf_off,ctx->obuf_len-ctx->obuf_off,r);
+fprintf(stderr,"FLUSH [%3d] %3d -> %3d\n",ctx->obuf_off,ctx->obuf_len,r);
#endif
BIO_copy_next_retry(b);
if (r <= 0) return((long)r);
ctx->obuf_off+=r;
+ ctx->obuf_len-=r;
}
else
{
typedef struct bio_f_buffer_ctx_struct
{
+ /* Buffers are setup like this:
+ *
+ * <---------------------- size ----------------------->
+ * +---------------------------------------------------+
+ * | consumed | remaining | free space |
+ * +---------------------------------------------------+
+ * <-- off --><------- len ------->
+ */
+
/* BIO *bio; */ /* this is now in the BIO struct */
int ibuf_size; /* how big is the input buffer */
int obuf_size; /* how big is the output buffer */
addze r11,r0
#mul_add_c(a[3],b[2],c3,c1,c2);
$LD r6,`3*$BNSZ`(r4)
- $LD r7,`2*$BNSZ`(r4)
+ $LD r7,`2*$BNSZ`(r5)
$UMULL r8,r6,r7
$UMULH r9,r6,r7
addc r12,r8,r12
&jle (&label("sqradd"));
&mov ($carry,"edx");
- &lea ("edx",&DWP(0,$sbit,"edx",2));
+ &add ("edx","edx");
&shr ($carry,31);
+ &add ("edx",$sbit);
+ &adc ($carry,0);
&set_label("sqrlast");
&mov ($word,$_n0);
&mov ($inp,$_np);
* used only by crypto/rsa/rsa_eay.c, rsa_lib.c */
#endif
CRYPTO_THREADID tid;
- unsigned int counter;
+ int counter;
unsigned long flags;
BN_MONT_CTX *m_ctx;
int (*bn_mod_exp)(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
if (BN_get_flags(mod, BN_FLG_CONSTTIME) != 0)
BN_set_flags(ret->mod, BN_FLG_CONSTTIME);
- ret->counter = BN_BLINDING_COUNTER;
+ /* Set the counter to the special value -1
+ * to indicate that this is never-used fresh blinding
+ * that does not need updating before first use. */
+ ret->counter = -1;
CRYPTO_THREADID_current(&ret->tid);
return(ret);
err:
goto err;
}
- if (--(b->counter) == 0 && b->e != NULL &&
+ if (b->counter == -1)
+ b->counter = 0;
+
+ if (++b->counter == BN_BLINDING_COUNTER && b->e != NULL &&
!(b->flags & BN_BLINDING_NO_RECREATE))
{
/* re-create blinding parameters */
ret=1;
err:
- if (b->counter == 0)
- b->counter = BN_BLINDING_COUNTER;
+ if (b->counter == BN_BLINDING_COUNTER)
+ b->counter = 0;
return(ret);
}
return(0);
}
+ if (b->counter == -1)
+ /* Fresh blinding, doesn't need updating. */
+ b->counter = 0;
+ else if (!BN_BLINDING_update(b,ctx))
+ return(0);
+
if (r != NULL)
{
if (!BN_copy(r, b->Ai)) ret=0;
int ret;
bn_check_top(n);
- if ((b->A == NULL) || (b->Ai == NULL))
- {
- BNerr(BN_F_BN_BLINDING_INVERT_EX,BN_R_NOT_INITIALIZED);
- return(0);
- }
if (r != NULL)
ret = BN_mod_mul(n, n, r, b->mod, ctx);
else
- ret = BN_mod_mul(n, n, b->Ai, b->mod, ctx);
-
- if (ret >= 0)
{
- if (!BN_BLINDING_update(b,ctx))
+ if (b->Ai == NULL)
+ {
+ BNerr(BN_F_BN_BLINDING_INVERT_EX,BN_R_NOT_INITIALIZED);
return(0);
+ }
+ ret = BN_mod_mul(n, n, b->Ai, b->mod, ctx);
}
+
bn_check_top(n);
return(ret);
}
field_sqr = group->meth->field_sqr;
/* only support affine coordinates */
- if (!point->Z_is_one) goto err;
+ if (!point->Z_is_one) return -1;
if (ctx == NULL)
{
size_t crv_len = 0, n = 0;
EC_KEY *eckey = NULL, *wrong_eckey = NULL;
EC_GROUP *group;
+ ECDSA_SIG *ecdsa_sig = NULL;
unsigned char digest[20], wrong_digest[20];
- unsigned char *signature = NULL;
- unsigned int sig_len;
+ unsigned char *signature = NULL;
+ unsigned char *sig_ptr;
+ unsigned char *raw_buf = NULL;
+ unsigned int sig_len, degree, r_len, s_len, bn_len, buf_len;
int nid, ret = 0;
/* fill digest values with some random data */
if (EC_KEY_set_group(eckey, group) == 0)
goto builtin_err;
EC_GROUP_free(group);
- if (EC_GROUP_get_degree(EC_KEY_get0_group(eckey)) < 160)
+ degree = EC_GROUP_get_degree(EC_KEY_get0_group(eckey));
+ if (degree < 160)
/* drop the curve */
{
EC_KEY_free(eckey);
}
BIO_printf(out, ".");
(void)BIO_flush(out);
- /* modify a single byte of the signature */
- offset = signature[10] % sig_len;
- dirt = signature[11];
- signature[offset] ^= dirt ? dirt : 1;
+ /* wrong length */
+ if (ECDSA_verify(0, digest, 20, signature, sig_len - 1,
+ eckey) == 1)
+ {
+ BIO_printf(out, " failed\n");
+ goto builtin_err;
+ }
+ BIO_printf(out, ".");
+ (void)BIO_flush(out);
+
+ /* Modify a single byte of the signature: to ensure we don't
+ * garble the ASN1 structure, we read the raw signature and
+ * modify a byte in one of the bignums directly. */
+ sig_ptr = signature;
+ if ((ecdsa_sig = d2i_ECDSA_SIG(NULL, &sig_ptr, sig_len)) == NULL)
+ {
+ BIO_printf(out, " failed\n");
+ goto builtin_err;
+ }
+
+ /* Store the two BIGNUMs in raw_buf. */
+ r_len = BN_num_bytes(ecdsa_sig->r);
+ s_len = BN_num_bytes(ecdsa_sig->s);
+ bn_len = (degree + 7) / 8;
+ if ((r_len > bn_len) || (s_len > bn_len))
+ {
+ BIO_printf(out, " failed\n");
+ goto builtin_err;
+ }
+ buf_len = 2 * bn_len;
+ if ((raw_buf = OPENSSL_malloc(buf_len)) == NULL)
+ goto builtin_err;
+ /* Pad the bignums with leading zeroes. */
+ memset(raw_buf, 0, buf_len);
+ BN_bn2bin(ecdsa_sig->r, raw_buf + bn_len - r_len);
+ BN_bn2bin(ecdsa_sig->s, raw_buf + buf_len - s_len);
+
+ /* Modify a single byte in the buffer. */
+ offset = raw_buf[10] % buf_len;
+ dirt = raw_buf[11] ? raw_buf[11] : 1;
+ raw_buf[offset] ^= dirt;
+ /* Now read the BIGNUMs back in from raw_buf. */
+ if ((BN_bin2bn(raw_buf, bn_len, ecdsa_sig->r) == NULL) ||
+ (BN_bin2bn(raw_buf + bn_len, bn_len, ecdsa_sig->s) == NULL))
+ goto builtin_err;
+
+ sig_ptr = signature;
+ sig_len = i2d_ECDSA_SIG(ecdsa_sig, &sig_ptr);
if (ECDSA_verify(0, digest, 20, signature, sig_len, eckey) == 1)
{
BIO_printf(out, " failed\n");
goto builtin_err;
}
+ /* Sanity check: undo the modification and verify signature. */
+ raw_buf[offset] ^= dirt;
+ if ((BN_bin2bn(raw_buf, bn_len, ecdsa_sig->r) == NULL) ||
+ (BN_bin2bn(raw_buf + bn_len, bn_len, ecdsa_sig->s) == NULL))
+ goto builtin_err;
+
+ sig_ptr = signature;
+ sig_len = i2d_ECDSA_SIG(ecdsa_sig, &sig_ptr);
+ if (ECDSA_verify(0, digest, 20, signature, sig_len, eckey) != 1)
+ {
+ BIO_printf(out, " failed\n");
+ goto builtin_err;
+ }
BIO_printf(out, ".");
(void)BIO_flush(out);
BIO_printf(out, " ok\n");
/* cleanup */
+ /* clean bogus errors */
+ ERR_clear_error();
OPENSSL_free(signature);
signature = NULL;
EC_KEY_free(eckey);
eckey = NULL;
EC_KEY_free(wrong_eckey);
wrong_eckey = NULL;
+ ECDSA_SIG_free(ecdsa_sig);
+ ecdsa_sig = NULL;
+ OPENSSL_free(raw_buf);
+ raw_buf = NULL;
}
ret = 1;
EC_KEY_free(eckey);
if (wrong_eckey)
EC_KEY_free(wrong_eckey);
+ if (ecdsa_sig)
+ ECDSA_SIG_free(ecdsa_sig);
if (signature)
OPENSSL_free(signature);
+ if (raw_buf)
+ OPENSSL_free(raw_buf);
if (curves)
OPENSSL_free(curves);
#ifndef OPENSSL_DOING_MAKEDEPEND
+#ifndef OPENSSL_NO_CAMELLIA
+# define OPENSSL_NO_CAMELLIA
+#endif
#ifndef OPENSSL_NO_GMP
# define OPENSSL_NO_GMP
#endif
+#ifndef OPENSSL_NO_IDEA
+# define OPENSSL_NO_IDEA
+#endif
#ifndef OPENSSL_NO_JPAKE
# define OPENSSL_NO_JPAKE
#endif
#ifndef OPENSSL_NO_KRB5
# define OPENSSL_NO_KRB5
#endif
-#ifndef OPENSSL_NO_MD2
-# define OPENSSL_NO_MD2
-#endif
#ifndef OPENSSL_NO_RC5
# define OPENSSL_NO_RC5
#endif
#endif /* OPENSSL_DOING_MAKEDEPEND */
-#ifndef OPENSSL_NO_DYNAMIC_ENGINE
-# define OPENSSL_NO_DYNAMIC_ENGINE
+#ifndef OPENSSL_THREADS
+# define OPENSSL_THREADS
+#endif
+#ifndef OPENSSL_NO_ASM
+# define OPENSSL_NO_ASM
+#endif
+#ifndef OPENSSL_NO_STATIC_ENGINE
+# define OPENSSL_NO_STATIC_ENGINE
#endif
/* The OPENSSL_NO_* macros are also defined as NO_* if the application
who haven't had the time to do the appropriate changes in their
applications. */
#ifdef OPENSSL_ALGORITHM_DEFINES
+# if defined(OPENSSL_NO_CAMELLIA) && !defined(NO_CAMELLIA)
+# define NO_CAMELLIA
+# endif
# if defined(OPENSSL_NO_GMP) && !defined(NO_GMP)
# define NO_GMP
# endif
+# if defined(OPENSSL_NO_IDEA) && !defined(NO_IDEA)
+# define NO_IDEA
+# endif
# if defined(OPENSSL_NO_JPAKE) && !defined(NO_JPAKE)
# define NO_JPAKE
# endif
# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5)
# define NO_KRB5
# endif
-# if defined(OPENSSL_NO_MD2) && !defined(NO_MD2)
-# define NO_MD2
-# endif
# if defined(OPENSSL_NO_RC5) && !defined(NO_RC5)
# define NO_RC5
# endif
#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
-#define ENGINESDIR "/usr/local/ssl/lib/engines"
-#define OPENSSLDIR "/usr/local/ssl"
+#define ENGINESDIR "/usr/lib/engines"
+#define OPENSSLDIR "/usr/ssl"
#endif
#endif
* - Intel P6 because partial register stalls are very expensive;
* - elder Alpha because it lacks byte load/store instructions;
*/
-#define RC4_INT unsigned int
+#define RC4_INT unsigned char
#endif
#if !defined(RC4_CHUNK)
/*
* This enables code handling data aligned at natural CPU word
* boundary. See crypto/rc4/rc4_enc.c for further details.
*/
-#undef RC4_CHUNK
+#define RC4_CHUNK unsigned long
#endif
#endif
/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a
* %20 speed up (longs are 8 bytes, int's are 4). */
#ifndef DES_LONG
-#define DES_LONG unsigned long
+#define DES_LONG unsigned int
#endif
#endif
#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
#define CONFIG_HEADER_BN_H
-#undef BN_LLONG
+#define BN_LLONG
/* Should we define BN_DIV2W here? */
#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
#define CONFIG_HEADER_BF_LOCL_H
-#undef BF_PTR
+#define BF_PTR
#endif /* HEADER_BF_LOCL_H */
#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
/* Unroll the inner loop, this sometimes helps, sometimes hinders.
* Very mucy CPU dependant */
#ifndef DES_UNROLL
-#undef DES_UNROLL
+#define DES_UNROLL
#endif
/* These default values were supplied by
* (Prior to 0.9.5a beta1, a different scheme was used: MMNNFFRBB for
* major minor fix final patch/beta)
*/
-#define OPENSSL_VERSION_NUMBER 0x1000005fL
+#define OPENSSL_VERSION_NUMBER 0x1000006fL
#ifdef OPENSSL_FIPS
-#define OPENSSL_VERSION_TEXT "OpenSSL 1.0.0e-fips 6 Sep 2011"
+#define OPENSSL_VERSION_TEXT "OpenSSL 1.0.0f-fips 4 Jan 2012"
#else
-#define OPENSSL_VERSION_TEXT "OpenSSL 1.0.0e 6 Sep 2011"
+#define OPENSSL_VERSION_TEXT "OpenSSL 1.0.0f 4 Jan 2012"
#endif
#define OPENSSL_VERSION_PTEXT " part of " OPENSSL_VERSION_TEXT
# define FD_SETSIZE (8*sizeof(fd_set))
#endif
-#ifdef __VOS__
+#if defined(OPENSSL_SYS_VOS)
+
+/* The following algorithm repeatedly samples the real-time clock
+ (RTC) to generate a sequence of unpredictable data. The algorithm
+ relies upon the uneven execution speed of the code (due to factors
+ such as cache misses, interrupts, bus activity, and scheduling) and
+ upon the rather large relative difference between the speed of the
+ clock and the rate at which it can be read.
+
+ If this code is ported to an environment where execution speed is
+ more constant or where the RTC ticks at a much slower rate, or the
+ clock can be read with fewer instructions, it is likely that the
+ results would be far more predictable.
+
+ As a precaution, we generate 4 times the minimum required amount of
+ seed data. */
+
int RAND_poll(void)
{
- unsigned char buf[ENTROPY_NEEDED];
+ short int code;
+ gid_t curr_gid;
pid_t curr_pid;
uid_t curr_uid;
- static int first=1;
- int i;
- long rnd = 0;
+ int i, k;
struct timespec ts;
- unsigned seed;
-
-/* The VOS random() function starts from a static seed so its
- initial value is predictable. If random() returns the
- initial value, reseed it with dynamic data. The VOS
- real-time clock has a granularity of 1 nsec so it should be
- reasonably difficult to predict its exact value. Do not
- gratuitously reseed the PRNG because other code in this
- process or thread may be using it. */
-
- if (first) {
- first = 0;
- rnd = random ();
- if (rnd == 1804289383) {
- clock_gettime (CLOCK_REALTIME, &ts);
- curr_pid = getpid();
- curr_uid = getuid();
- seed = ts.tv_sec ^ ts.tv_nsec ^ curr_pid ^ curr_uid;
- srandom (seed);
- }
- }
+ unsigned char v;
- for (i = 0; i < sizeof(buf); i++) {
- if (i % 4 == 0)
- rnd = random();
- buf[i] = rnd;
- rnd >>= 8;
- }
- RAND_add(buf, sizeof(buf), ENTROPY_NEEDED);
- memset(buf, 0, sizeof(buf));
+#ifdef OPENSSL_SYS_VOS_HPPA
+ long duration;
+ extern void s$sleep (long *_duration, short int *_code);
+#else
+#ifdef OPENSSL_SYS_VOS_IA32
+ long long duration;
+ extern void s$sleep2 (long long *_duration, short int *_code);
+#else
+#error "Unsupported Platform."
+#endif /* OPENSSL_SYS_VOS_IA32 */
+#endif /* OPENSSL_SYS_VOS_HPPA */
+
+ /* Seed with the gid, pid, and uid, to ensure *some*
+ variation between different processes. */
+
+ curr_gid = getgid();
+ RAND_add (&curr_gid, sizeof curr_gid, 1);
+ curr_gid = 0;
+
+ curr_pid = getpid();
+ RAND_add (&curr_pid, sizeof curr_pid, 1);
+ curr_pid = 0;
+
+ curr_uid = getuid();
+ RAND_add (&curr_uid, sizeof curr_uid, 1);
+ curr_uid = 0;
+ for (i=0; i<(ENTROPY_NEEDED*4); i++)
+ {
+ /* burn some cpu; hope for interrupts, cache
+ collisions, bus interference, etc. */
+ for (k=0; k<99; k++)
+ ts.tv_nsec = random ();
+
+#ifdef OPENSSL_SYS_VOS_HPPA
+ /* sleep for 1/1024 of a second (976 us). */
+ duration = 1;
+ s$sleep (&duration, &code);
+#else
+#ifdef OPENSSL_SYS_VOS_IA32
+ /* sleep for 1/65536 of a second (15 us). */
+ duration = 1;
+ s$sleep2 (&duration, &code);
+#endif /* OPENSSL_SYS_VOS_IA32 */
+#endif /* OPENSSL_SYS_VOS_HPPA */
+
+ /* get wall clock time. */
+ clock_gettime (CLOCK_REALTIME, &ts);
+
+ /* take 8 bits */
+ v = (unsigned char) (ts.tv_nsec % 256);
+ RAND_add (&v, sizeof v, 1);
+ v = 0;
+ }
return 1;
}
#elif defined __OpenBSD__
return ret;
}
-static int rsa_blinding_convert(BN_BLINDING *b, int local, BIGNUM *f,
- BIGNUM *r, BN_CTX *ctx)
-{
- if (local)
+static int rsa_blinding_convert(BN_BLINDING *b, BIGNUM *f, BIGNUM *unblind,
+ BN_CTX *ctx)
+ {
+ if (unblind == NULL)
+ /* Local blinding: store the unblinding factor
+ * in BN_BLINDING. */
return BN_BLINDING_convert_ex(f, NULL, b, ctx);
else
{
- int ret;
- CRYPTO_r_lock(CRYPTO_LOCK_RSA_BLINDING);
- ret = BN_BLINDING_convert_ex(f, r, b, ctx);
- CRYPTO_r_unlock(CRYPTO_LOCK_RSA_BLINDING);
- return ret;
- }
-}
-
-static int rsa_blinding_invert(BN_BLINDING *b, int local, BIGNUM *f,
- BIGNUM *r, BN_CTX *ctx)
-{
- if (local)
- return BN_BLINDING_invert_ex(f, NULL, b, ctx);
- else
- {
+ /* Shared blinding: store the unblinding factor
+ * outside BN_BLINDING. */
int ret;
CRYPTO_w_lock(CRYPTO_LOCK_RSA_BLINDING);
- ret = BN_BLINDING_invert_ex(f, r, b, ctx);
+ ret = BN_BLINDING_convert_ex(f, unblind, b, ctx);
CRYPTO_w_unlock(CRYPTO_LOCK_RSA_BLINDING);
return ret;
}
-}
+ }
+
+static int rsa_blinding_invert(BN_BLINDING *b, BIGNUM *f, BIGNUM *unblind,
+ BN_CTX *ctx)
+ {
+ /* For local blinding, unblind is set to NULL, and BN_BLINDING_invert_ex
+ * will use the unblinding factor stored in BN_BLINDING.
+ * If BN_BLINDING is shared between threads, unblind must be non-null:
+ * BN_BLINDING_invert_ex will then use the local unblinding factor,
+ * and will only read the modulus from BN_BLINDING.
+ * In both cases it's safe to access the blinding without a lock.
+ */
+ return BN_BLINDING_invert_ex(f, unblind, b, ctx);
+ }
/* signing */
static int RSA_eay_private_encrypt(int flen, const unsigned char *from,
unsigned char *to, RSA *rsa, int padding)
{
- BIGNUM *f, *ret, *br, *res;
+ BIGNUM *f, *ret, *res;
int i,j,k,num=0,r= -1;
unsigned char *buf=NULL;
BN_CTX *ctx=NULL;
int local_blinding = 0;
+ /* Used only if the blinding structure is shared. A non-NULL unblind
+ * instructs rsa_blinding_convert() and rsa_blinding_invert() to store
+ * the unblinding factor outside the blinding structure. */
+ BIGNUM *unblind = NULL;
BN_BLINDING *blinding = NULL;
if ((ctx=BN_CTX_new()) == NULL) goto err;
BN_CTX_start(ctx);
f = BN_CTX_get(ctx);
- br = BN_CTX_get(ctx);
ret = BN_CTX_get(ctx);
num = BN_num_bytes(rsa->n);
buf = OPENSSL_malloc(num);
}
if (blinding != NULL)
- if (!rsa_blinding_convert(blinding, local_blinding, f, br, ctx))
+ {
+ if (!local_blinding && ((unblind = BN_CTX_get(ctx)) == NULL))
+ {
+ RSAerr(RSA_F_RSA_EAY_PRIVATE_ENCRYPT,ERR_R_MALLOC_FAILURE);
+ goto err;
+ }
+ if (!rsa_blinding_convert(blinding, f, unblind, ctx))
goto err;
+ }
if ( (rsa->flags & RSA_FLAG_EXT_PKEY) ||
((rsa->p != NULL) &&
}
if (blinding)
- if (!rsa_blinding_invert(blinding, local_blinding, ret, br, ctx))
+ if (!rsa_blinding_invert(blinding, ret, unblind, ctx))
goto err;
if (padding == RSA_X931_PADDING)
static int RSA_eay_private_decrypt(int flen, const unsigned char *from,
unsigned char *to, RSA *rsa, int padding)
{
- BIGNUM *f, *ret, *br;
+ BIGNUM *f, *ret;
int j,num=0,r= -1;
unsigned char *p;
unsigned char *buf=NULL;
BN_CTX *ctx=NULL;
int local_blinding = 0;
+ /* Used only if the blinding structure is shared. A non-NULL unblind
+ * instructs rsa_blinding_convert() and rsa_blinding_invert() to store
+ * the unblinding factor outside the blinding structure. */
+ BIGNUM *unblind = NULL;
BN_BLINDING *blinding = NULL;
if((ctx = BN_CTX_new()) == NULL) goto err;
BN_CTX_start(ctx);
f = BN_CTX_get(ctx);
- br = BN_CTX_get(ctx);
ret = BN_CTX_get(ctx);
num = BN_num_bytes(rsa->n);
buf = OPENSSL_malloc(num);
}
if (blinding != NULL)
- if (!rsa_blinding_convert(blinding, local_blinding, f, br, ctx))
+ {
+ if (!local_blinding && ((unblind = BN_CTX_get(ctx)) == NULL))
+ {
+ RSAerr(RSA_F_RSA_EAY_PRIVATE_DECRYPT,ERR_R_MALLOC_FAILURE);
goto err;
+ }
+ if (!rsa_blinding_convert(blinding, f, unblind, ctx))
+ goto err;
+ }
/* do the decrypt */
if ( (rsa->flags & RSA_FLAG_EXT_PKEY) ||
}
if (blinding)
- if (!rsa_blinding_invert(blinding, local_blinding, ret, br, ctx))
+ if (!rsa_blinding_invert(blinding, ret, unblind, ctx))
goto err;
p=buf;
atm.length=sizeof(buff2);
atm.data=(unsigned char *)buff2;
- if (X509_time_adj(&atm,-offset*60, cmp_time) == NULL)
+ if (X509_time_adj(&atm, offset*60, cmp_time) == NULL)
return 0;
if (ctm->type == V_ASN1_UTCTIME)
* Expand the bitstring form of an address into a raw byte array.
* At the moment this is coded for simplicity, not speed.
*/
-static void addr_expand(unsigned char *addr,
+static int addr_expand(unsigned char *addr,
const ASN1_BIT_STRING *bs,
const int length,
const unsigned char fill)
{
- OPENSSL_assert(bs->length >= 0 && bs->length <= length);
+ if (bs->length < 0 || bs->length > length)
+ return 0;
if (bs->length > 0) {
memcpy(addr, bs->data, bs->length);
if ((bs->flags & 7) != 0) {
}
}
memset(addr + bs->length, fill, length - bs->length);
+ return 1;
}
/*
return 0;
switch (afi) {
case IANA_AFI_IPV4:
- if (bs->length > 4)
+ if (!addr_expand(addr, bs, 4, fill))
return 0;
- addr_expand(addr, bs, 4, fill);
BIO_printf(out, "%d.%d.%d.%d", addr[0], addr[1], addr[2], addr[3]);
break;
case IANA_AFI_IPV6:
- if (bs->length > 16)
+ if (!addr_expand(addr, bs, 16, fill))
return 0;
- addr_expand(addr, bs, 16, fill);
for (n = 16; n > 1 && addr[n-1] == 0x00 && addr[n-2] == 0x00; n -= 2)
;
for (i = 0; i < n; i += 2)
/*
* Sort comparison function for a sequence of IPAddressOrRange
* elements.
+ *
+ * There's no sane answer we can give if addr_expand() fails, and an
+ * assertion failure on externally supplied data is seriously uncool,
+ * so we just arbitrarily declare that if given invalid inputs this
+ * function returns -1. If this messes up your preferred sort order
+ * for garbage input, tough noogies.
*/
static int IPAddressOrRange_cmp(const IPAddressOrRange *a,
const IPAddressOrRange *b,
switch (a->type) {
case IPAddressOrRange_addressPrefix:
- addr_expand(addr_a, a->u.addressPrefix, length, 0x00);
+ if (!addr_expand(addr_a, a->u.addressPrefix, length, 0x00))
+ return -1;
prefixlen_a = addr_prefixlen(a->u.addressPrefix);
break;
case IPAddressOrRange_addressRange:
- addr_expand(addr_a, a->u.addressRange->min, length, 0x00);
+ if (!addr_expand(addr_a, a->u.addressRange->min, length, 0x00))
+ return -1;
prefixlen_a = length * 8;
break;
}
switch (b->type) {
case IPAddressOrRange_addressPrefix:
- addr_expand(addr_b, b->u.addressPrefix, length, 0x00);
+ if (!addr_expand(addr_b, b->u.addressPrefix, length, 0x00))
+ return -1;
prefixlen_b = addr_prefixlen(b->u.addressPrefix);
break;
case IPAddressOrRange_addressRange:
- addr_expand(addr_b, b->u.addressRange->min, length, 0x00);
+ if (!addr_expand(addr_b, b->u.addressRange->min, length, 0x00))
+ return -1;
prefixlen_b = length * 8;
break;
}
unsigned char mask;
int i, j;
+ OPENSSL_assert(memcmp(min, max, length) <= 0);
for (i = 0; i < length && min[i] == max[i]; i++)
;
for (j = length - 1; j >= 0 && min[j] == 0x00 && max[j] == 0xFF; j--)
return NULL;
switch (afi) {
case IANA_AFI_IPV4:
- sk_IPAddressOrRange_set_cmp_func(aors, v4IPAddressOrRange_cmp);
+ (void) sk_IPAddressOrRange_set_cmp_func(aors, v4IPAddressOrRange_cmp);
break;
case IANA_AFI_IPV6:
- sk_IPAddressOrRange_set_cmp_func(aors, v6IPAddressOrRange_cmp);
+ (void) sk_IPAddressOrRange_set_cmp_func(aors, v6IPAddressOrRange_cmp);
break;
}
f->ipAddressChoice->type = IPAddressChoice_addressesOrRanges;
/*
* Extract min and max values from an IPAddressOrRange.
*/
-static void extract_min_max(IPAddressOrRange *aor,
+static int extract_min_max(IPAddressOrRange *aor,
unsigned char *min,
unsigned char *max,
int length)
{
- OPENSSL_assert(aor != NULL && min != NULL && max != NULL);
+ if (aor == NULL || min == NULL || max == NULL)
+ return 0;
switch (aor->type) {
case IPAddressOrRange_addressPrefix:
- addr_expand(min, aor->u.addressPrefix, length, 0x00);
- addr_expand(max, aor->u.addressPrefix, length, 0xFF);
- return;
+ return (addr_expand(min, aor->u.addressPrefix, length, 0x00) &&
+ addr_expand(max, aor->u.addressPrefix, length, 0xFF));
case IPAddressOrRange_addressRange:
- addr_expand(min, aor->u.addressRange->min, length, 0x00);
- addr_expand(max, aor->u.addressRange->max, length, 0xFF);
- return;
+ return (addr_expand(min, aor->u.addressRange->min, length, 0x00) &&
+ addr_expand(max, aor->u.addressRange->max, length, 0xFF));
}
+ return 0;
}
/*
if (aor == NULL || min == NULL || max == NULL ||
afi_length == 0 || length < afi_length ||
(aor->type != IPAddressOrRange_addressPrefix &&
- aor->type != IPAddressOrRange_addressRange))
+ aor->type != IPAddressOrRange_addressRange) ||
+ !extract_min_max(aor, min, max, afi_length))
return 0;
- extract_min_max(aor, min, max, afi_length);
+
return afi_length;
}
IPAddressOrRange *a = sk_IPAddressOrRange_value(aors, j);
IPAddressOrRange *b = sk_IPAddressOrRange_value(aors, j + 1);
- extract_min_max(a, a_min, a_max, length);
- extract_min_max(b, b_min, b_max, length);
+ if (!extract_min_max(a, a_min, a_max, length) ||
+ !extract_min_max(b, b_min, b_max, length))
+ return 0;
/*
* Punt misordered list, overlapping start, or inverted range.
}
/*
- * Check final range to see if it should be a prefix.
+ * Check range to see if it's inverted or should be a
+ * prefix.
*/
j = sk_IPAddressOrRange_num(aors) - 1;
{
IPAddressOrRange *a = sk_IPAddressOrRange_value(aors, j);
- if (a->type == IPAddressOrRange_addressRange) {
- extract_min_max(a, a_min, a_max, length);
- if (range_should_be_prefix(a_min, a_max, length) >= 0)
+ if (a != NULL && a->type == IPAddressOrRange_addressRange) {
+ if (!extract_min_max(a, a_min, a_max, length))
+ return 0;
+ if (memcmp(a_min, a_max, length) > 0 ||
+ range_should_be_prefix(a_min, a_max, length) >= 0)
return 0;
}
}
unsigned char a_min[ADDR_RAW_BUF_LEN], a_max[ADDR_RAW_BUF_LEN];
unsigned char b_min[ADDR_RAW_BUF_LEN], b_max[ADDR_RAW_BUF_LEN];
- extract_min_max(a, a_min, a_max, length);
- extract_min_max(b, b_min, b_max, length);
+ if (!extract_min_max(a, a_min, a_max, length) ||
+ !extract_min_max(b, b_min, b_max, length))
+ return 0;
+
+ /*
+ * Punt inverted ranges.
+ */
+ if (memcmp(a_min, a_max, length) > 0 ||
+ memcmp(b_min, b_max, length) > 0)
+ return 0;
/*
* Punt overlaps.
IPAddressOrRange *merged;
if (!make_addressRange(&merged, a_min, b_max, length))
return 0;
- sk_IPAddressOrRange_set(aors, i, merged);
- sk_IPAddressOrRange_delete(aors, i + 1);
+ (void) sk_IPAddressOrRange_set(aors, i, merged);
+ (void) sk_IPAddressOrRange_delete(aors, i + 1);
IPAddressOrRange_free(a);
IPAddressOrRange_free(b);
--i;
}
}
+ /*
+ * Check for inverted final range.
+ */
+ j = sk_IPAddressOrRange_num(aors) - 1;
+ {
+ IPAddressOrRange *a = sk_IPAddressOrRange_value(aors, j);
+ if (a != NULL && a->type == IPAddressOrRange_addressRange) {
+ unsigned char a_min[ADDR_RAW_BUF_LEN], a_max[ADDR_RAW_BUF_LEN];
+ extract_min_max(a, a_min, a_max, length);
+ if (memcmp(a_min, a_max, length) > 0)
+ return 0;
+ }
+ }
+
return 1;
}
v3_addr_get_afi(f)))
return 0;
}
- sk_IPAddressFamily_set_cmp_func(addr, IPAddressFamily_cmp);
+ (void) sk_IPAddressFamily_set_cmp_func(addr, IPAddressFamily_cmp);
sk_IPAddressFamily_sort(addr);
OPENSSL_assert(v3_addr_is_canonical(addr));
return 1;
X509V3_conf_err(val);
goto err;
}
+ if (memcmp(min, max, length_from_afi(afi)) > 0) {
+ X509V3err(X509V3_F_V2I_IPADDRBLOCKS, X509V3_R_EXTENSION_VALUE_ERROR);
+ X509V3_conf_err(val);
+ goto err;
+ }
if (!v3_addr_add_range(addr, afi, safi, min, max)) {
X509V3err(X509V3_F_V2I_IPADDRBLOCKS, ERR_R_MALLOC_FAILURE);
goto err;
p = 0;
for (c = 0; c < sk_IPAddressOrRange_num(child); c++) {
- extract_min_max(sk_IPAddressOrRange_value(child, c),
- c_min, c_max, length);
+ if (!extract_min_max(sk_IPAddressOrRange_value(child, c),
+ c_min, c_max, length))
+ return -1;
for (;; p++) {
if (p >= sk_IPAddressOrRange_num(parent))
return 0;
- extract_min_max(sk_IPAddressOrRange_value(parent, p),
- p_min, p_max, length);
+ if (!extract_min_max(sk_IPAddressOrRange_value(parent, p),
+ p_min, p_max, length))
+ return 0;
if (memcmp(p_max, c_max, length) < 0)
continue;
if (memcmp(p_min, c_min, length) > 0)
return 1;
if (b == NULL || v3_addr_inherits(a) || v3_addr_inherits(b))
return 0;
- sk_IPAddressFamily_set_cmp_func(b, IPAddressFamily_cmp);
+ (void) sk_IPAddressFamily_set_cmp_func(b, IPAddressFamily_cmp);
for (i = 0; i < sk_IPAddressFamily_num(a); i++) {
IPAddressFamily *fa = sk_IPAddressFamily_value(a, i);
int j = sk_IPAddressFamily_find(b, fa);
}
if (!v3_addr_is_canonical(ext))
validation_err(X509_V_ERR_INVALID_EXTENSION);
- sk_IPAddressFamily_set_cmp_func(ext, IPAddressFamily_cmp);
+ (void) sk_IPAddressFamily_set_cmp_func(ext, IPAddressFamily_cmp);
if ((child = sk_IPAddressFamily_dup(ext)) == NULL) {
X509V3err(X509V3_F_V3_ADDR_VALIDATE_PATH_INTERNAL, ERR_R_MALLOC_FAILURE);
ret = 0;
}
continue;
}
- sk_IPAddressFamily_set_cmp_func(x->rfc3779_addr, IPAddressFamily_cmp);
+ (void) sk_IPAddressFamily_set_cmp_func(x->rfc3779_addr, IPAddressFamily_cmp);
for (j = 0; j < sk_IPAddressFamily_num(child); j++) {
IPAddressFamily *fc = sk_IPAddressFamily_value(child, j);
int k = sk_IPAddressFamily_find(x->rfc3779_addr, fc);
+openssl (1.0.0f-2) unstable; urgency=low
+
+ * exclude rc5, idea and camellia because of patent issue
+ * Git: slp/unmodified/openssl
+ * Tag: openssl_1.0.0f-2
+
+ -- Kidong Kim <kd0228.kim@samsung.com> Thu, 09 Feb 2012 17:54:12 +0900
+
openssl (1.0.0e-6) unstable; urgency=low
* 11/12/21
config.status: Configure
dh_testdir
# Add here commands to configure the package.
- ./Configure shared --prefix=/usr --install-prefix=$(CURDIR)/debian/tmp linux-generic32 -ldl -no-asm enable-md2
+ ./Configure shared --prefix=/usr --install-prefix=$(CURDIR)/debian/tmp linux-generic32 -ldl no-asm no-idea no-camellia enable-md2
build: build-stamp
SSL_clear() resets the SSL object to allow for another connection. The
reset operation however keeps several settings of the last sessions
(some of these settings were made automatically during the last
-handshake). It only makes sense when opening a new session (or reusing
-an old one) with the same peer that shares these settings.
-SSL_clear() is not a short form for the sequence
-L<SSL_free(3)|SSL_free(3)>; L<SSL_new(3)|SSL_new(3)>; .
+handshake). It only makes sense for a new connection with the exact
+same peer that shares these settings, and may fail if that peer
+changes its settings between connections. Use the sequence
+L<SSL_get_session(3)|SSL_get_session(3)>;
+L<SSL_new(3)|SSL_new(3)>;
+L<SSL_set_session(3)|SSL_set_session(3)>;
+L<SSL_free(3)|SSL_free(3)>
+instead to avoid such failures
+(or simply L<SSL_free(3)|SSL_free(3)>; L<SSL_new(3)|SSL_new(3)>
+if session reuse is not desired).
=head1 RETURN VALUES
#endif
/* --------------------------------- VOS ----------------------------------- */
-#ifdef OPENSSL_SYSNAME_VOS
+#if defined(__VOS__) || defined(OPENSSL_SYSNAME_VOS)
# define OPENSSL_SYS_VOS
+#ifdef __HPPA__
+# define OPENSSL_SYS_VOS_HPPA
+#endif
+#ifdef __IA32__
+# define OPENSSL_SYS_VOS_IA32
+#endif
#endif
/* ------------------------------- VxWorks --------------------------------- */
}
param = get_encryption_params(gkt->key_agreement_info->cipher);
+ if(!param){
+ goto err;
+ }
+
gost_init(&ctx,param->sblock);
OPENSSL_assert(gkt->key_agreement_info->eph_iv->length==8);
memcpy(wrappedKey,gkt->key_agreement_info->eph_iv->data,8);
}
param = get_encryption_params(gkt->key_agreement_info->cipher);
+ if(!param){
+ goto err;
+ }
+
gost_init(&cctx,param->sblock);
OPENSSL_assert(gkt->key_agreement_info->eph_iv->length==8);
memcpy(wrappedKey,gkt->key_agreement_info->eph_iv->data,8);
--- /dev/null
+/* crypto/md/md2.h */
+/* Copyright (C) 1995-1997 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ *
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to. The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code. The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ *
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * "This product includes cryptographic software written by
+ * Eric Young (eay@cryptsoft.com)"
+ * The word 'cryptographic' can be left out if the rouines from the library
+ * being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from
+ * the apps directory (application code) you must include an acknowledgement:
+ * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed. i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#ifndef HEADER_MD2_H
+#define HEADER_MD2_H
+
+#include <openssl/opensslconf.h> /* OPENSSL_NO_MD2, MD2_INT */
+#ifdef OPENSSL_NO_MD2
+#error MD2 is disabled.
+#endif
+#include <stddef.h>
+
+#define MD2_DIGEST_LENGTH 16
+#define MD2_BLOCK 16
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct MD2state_st
+ {
+ unsigned int num;
+ unsigned char data[MD2_BLOCK];
+ MD2_INT cksm[MD2_BLOCK];
+ MD2_INT state[MD2_BLOCK];
+ } MD2_CTX;
+
+const char *MD2_options(void);
+int MD2_Init(MD2_CTX *c);
+int MD2_Update(MD2_CTX *c, const unsigned char *data, size_t len);
+int MD2_Final(unsigned char *md, MD2_CTX *c);
+unsigned char *MD2(const unsigned char *d, size_t n,unsigned char *md);
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null
+/* crypto/rc5/rc5.h */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ *
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to. The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code. The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ *
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * "This product includes cryptographic software written by
+ * Eric Young (eay@cryptsoft.com)"
+ * The word 'cryptographic' can be left out if the rouines from the library
+ * being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from
+ * the apps directory (application code) you must include an acknowledgement:
+ * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed. i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#ifndef HEADER_RC5_H
+#define HEADER_RC5_H
+
+#include <openssl/opensslconf.h> /* OPENSSL_NO_RC5 */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef OPENSSL_NO_RC5
+#error RC5 is disabled.
+#endif
+
+#define RC5_ENCRYPT 1
+#define RC5_DECRYPT 0
+
+/* 32 bit. For Alpha, things may get weird */
+#define RC5_32_INT unsigned long
+
+#define RC5_32_BLOCK 8
+#define RC5_32_KEY_LENGTH 16 /* This is a default, max is 255 */
+
+/* This are the only values supported. Tweak the code if you want more
+ * The most supported modes will be
+ * RC5-32/12/16
+ * RC5-32/16/8
+ */
+#define RC5_8_ROUNDS 8
+#define RC5_12_ROUNDS 12
+#define RC5_16_ROUNDS 16
+
+typedef struct rc5_key_st
+ {
+ /* Number of rounds */
+ int rounds;
+ RC5_32_INT data[2*(RC5_16_ROUNDS+1)];
+ } RC5_32_KEY;
+
+
+void RC5_32_set_key(RC5_32_KEY *key, int len, const unsigned char *data,
+ int rounds);
+void RC5_32_ecb_encrypt(const unsigned char *in,unsigned char *out,RC5_32_KEY *key,
+ int enc);
+void RC5_32_encrypt(unsigned long *data,RC5_32_KEY *key);
+void RC5_32_decrypt(unsigned long *data,RC5_32_KEY *key);
+void RC5_32_cbc_encrypt(const unsigned char *in, unsigned char *out,
+ long length, RC5_32_KEY *ks, unsigned char *iv,
+ int enc);
+void RC5_32_cfb64_encrypt(const unsigned char *in, unsigned char *out,
+ long length, RC5_32_KEY *schedule,
+ unsigned char *ivec, int *num, int enc);
+void RC5_32_ofb64_encrypt(const unsigned char *in, unsigned char *out,
+ long length, RC5_32_KEY *schedule,
+ unsigned char *ivec, int *num);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
#define SSL_F_SSL3_CALLBACK_CTRL 233
#define SSL_F_SSL3_CHANGE_CIPHER_STATE 129
#define SSL_F_SSL3_CHECK_CERT_AND_ALGORITHM 130
+#define SSL_F_SSL3_CHECK_CLIENT_HELLO 304
#define SSL_F_SSL3_CLIENT_HELLO 131
#define SSL_F_SSL3_CONNECT 132
#define SSL_F_SSL3_CTRL 213
#define SSL_R_MISSING_TMP_RSA_KEY 172
#define SSL_R_MISSING_TMP_RSA_PKEY 173
#define SSL_R_MISSING_VERIFY_MESSAGE 174
+#define SSL_R_MULTIPLE_SGC_RESTARTS 346
#define SSL_R_NON_SSLV2_INITIAL_PACKET 175
#define SSL_R_NO_CERTIFICATES_RETURNED 176
#define SSL_R_NO_CERTIFICATE_ASSIGNED 177
#define SSL3_FLAGS_POP_BUFFER 0x0004
#define TLS1_FLAGS_TLS_PADDING_BUG 0x0008
#define TLS1_FLAGS_SKIP_CERT_VERIFY 0x0010
+
+/* SSL3_FLAGS_SGC_RESTART_DONE is set when we
+ * restart a handshake because of MS SGC and so prevents us
+ * from restarting the handshake in a loop. It's reset on a
+ * renegotiation, so effectively limits the client to one restart
+ * per negotiation. This limits the possibility of a DDoS
+ * attack where the client handshakes in a loop using SGC to
+ * restart. Servers which permit renegotiation can still be
+ * effected, but we can't prevent that.
+ */
+#define SSL3_FLAGS_SGC_RESTART_DONE 0x0040
typedef struct ssl3_state_st
{
%define libmaj 1
%define libmin 0
%define librel 0
-%define librev e
+%define librev f
Release: 1
%define openssldir /var/ssl
-%define soversion 0.9.8
+%define soversion 1.0.0
Summary: A general purpose cryptography library with TLS implementation
Name: openssl
-Version: 0.9.8r
+Version: 1.0.0f
Release: 1
Source: openssl-%{version}.tar.gz
/* XDTLS: figure out the right values */
static unsigned int g_probable_mtu[] = {1500 - 28, 512 - 28, 256 - 28};
-static unsigned int dtls1_min_mtu(void);
static unsigned int dtls1_guess_mtu(unsigned int curr_mtu);
static void dtls1_fix_message_header(SSL *s, unsigned long frag_off,
unsigned long frag_len);
return ret;
mtu = s->d1->mtu - (DTLS1_HM_HEADER_LENGTH + DTLS1_RT_HEADER_LENGTH);
}
-
- OPENSSL_assert(mtu > 0); /* should have something reasonable now */
-
#endif
+ OPENSSL_assert(s->d1->mtu >= dtls1_min_mtu()); /* should have something reasonable now */
+
if ( s->init_off == 0 && type == SSL3_RT_HANDSHAKE)
OPENSSL_assert(s->init_num ==
(int)s->d1->w_msg_hdr.msg_len + DTLS1_HM_HEADER_LENGTH);
*ok = 0;
return i;
}
- OPENSSL_assert(i == DTLS1_HM_HEADER_LENGTH);
+ /* Handshake fails if message header is incomplete */
+ if (i != DTLS1_HM_HEADER_LENGTH)
+ {
+ al=SSL_AD_UNEXPECTED_MESSAGE;
+ SSLerr(SSL_F_DTLS1_GET_MESSAGE_FRAGMENT,SSL_R_UNEXPECTED_MESSAGE);
+ goto f_err;
+ }
/* parse the message fragment header */
dtls1_get_message_header(wire, &msg_hdr);
/* XDTLS: an incorrectly formatted fragment should cause the
* handshake to fail */
- OPENSSL_assert(i == (int)frag_len);
+ if (i != (int)frag_len)
+ {
+ al=SSL3_AD_ILLEGAL_PARAMETER;
+ SSLerr(SSL_F_DTLS1_GET_MESSAGE_FRAGMENT,SSL3_AD_ILLEGAL_PARAMETER);
+ goto f_err;
+ }
*ok = 1;
return p;
}
-static unsigned int
+unsigned int
dtls1_min_mtu(void)
{
return (g_probable_mtu[(sizeof(g_probable_mtu) /
pqueue buffered_messages;
pqueue sent_messages;
pqueue buffered_app_data;
-
+ unsigned int mtu;
+
if (s->d1)
{
unprocessed_rcds = s->d1->unprocessed_rcds.q;
buffered_messages = s->d1->buffered_messages;
sent_messages = s->d1->sent_messages;
buffered_app_data = s->d1->buffered_app_data.q;
+ mtu = s->d1->mtu;
dtls1_clear_queues(s);
s->d1->cookie_len = sizeof(s->d1->cookie);
}
+ if (SSL_get_options(s) & SSL_OP_NO_QUERY_MTU)
+ {
+ s->d1->mtu = mtu;
+ }
+
s->d1->unprocessed_rcds.q = unprocessed_rcds;
s->d1->processed_rcds.q = processed_rcds;
s->d1->buffered_messages = buffered_messages;
SSL3_RECORD *rr;
unsigned int mac_size;
unsigned char md[EVP_MAX_MD_SIZE];
+ int decryption_failed_or_bad_record_mac = 0;
rr= &(s->s3->rrec);
enc_err = s->method->ssl3_enc->enc(s,0);
if (enc_err <= 0)
{
- /* decryption failed, silently discard message */
- if (enc_err < 0)
- {
- rr->length = 0;
- s->packet_length = 0;
- }
- goto err;
+ /* To minimize information leaked via timing, we will always
+ * perform all computations before discarding the message.
+ */
+ decryption_failed_or_bad_record_mac = 1;
}
#ifdef TLS_DEBUG
SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_PRE_MAC_LENGTH_TOO_LONG);
goto f_err;
#else
- goto err;
+ decryption_failed_or_bad_record_mac = 1;
#endif
}
/* check the MAC for rr->input (it's in mac_size bytes at the tail) */
SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_LENGTH_TOO_SHORT);
goto f_err;
#else
- goto err;
+ decryption_failed_or_bad_record_mac = 1;
#endif
}
rr->length-=mac_size;
i=s->method->ssl3_enc->mac(s,md,0);
if (i < 0 || memcmp(md,&(rr->data[rr->length]),mac_size) != 0)
{
- goto err;
+ decryption_failed_or_bad_record_mac = 1;
}
}
+ if (decryption_failed_or_bad_record_mac)
+ {
+ /* decryption failed, silently discard message */
+ rr->length = 0;
+ s->packet_length = 0;
+ goto err;
+ }
+
/* r->length is now just compressed */
if (s->expand != NULL)
{
EVP_SignInit_ex(&md_ctx,EVP_ecdsa(), NULL);
EVP_SignUpdate(&md_ctx,&(s->s3->client_random[0]),SSL3_RANDOM_SIZE);
EVP_SignUpdate(&md_ctx,&(s->s3->server_random[0]),SSL3_RANDOM_SIZE);
- EVP_SignUpdate(&md_ctx,&(d[4]),n);
+ EVP_SignUpdate(&md_ctx,&(d[DTLS1_HM_HEADER_LENGTH]),n);
if (!EVP_SignFinal(&md_ctx,&(p[2]),
(unsigned int *)&i,pkey))
{
/* wrong packet length */
al=SSL_AD_DECODE_ERROR;
SSLerr(SSL_F_SSL3_GET_SERVER_HELLO,SSL_R_BAD_PACKET_LENGTH);
- goto err;
+ goto f_err;
}
return(1);
if (n < 6)
{
/* need at least ticket_lifetime_hint + ticket length */
- al = SSL3_AL_FATAL,SSL_AD_DECODE_ERROR;
+ al = SSL_AD_DECODE_ERROR;
SSLerr(SSL_F_SSL3_GET_NEW_SESSION_TICKET,SSL_R_LENGTH_MISMATCH);
goto f_err;
}
/* ticket_lifetime_hint + ticket_length + ticket */
if (ticklen + 6 != n)
{
- al = SSL3_AL_FATAL,SSL_AD_DECODE_ERROR;
+ al = SSL_AD_DECODE_ERROR;
SSLerr(SSL_F_SSL3_GET_NEW_SESSION_TICKET,SSL_R_LENGTH_MISMATCH);
goto f_err;
}
/* we need to add 'i-1' padding bytes */
l+=i;
+ /* the last of these zero bytes will be overwritten
+ * with the padding length. */
+ memset(&rec->input[rec->length], 0, i);
rec->length+=i;
rec->input[l-1]=(i-1);
}
{
unsigned char *rp,*wp;
size_t rlen, wlen;
+ int init_extra;
#ifdef TLSEXT_TYPE_opaque_prf_input
if (s->s3->client_opaque_prf_input != NULL)
wp = s->s3->wbuf.buf;
rlen = s->s3->rbuf.len;
wlen = s->s3->wbuf.len;
+ init_extra = s->s3->init_extra;
if (s->s3->handshake_buffer) {
BIO_free(s->s3->handshake_buffer);
s->s3->handshake_buffer = NULL;
s->s3->wbuf.buf = wp;
s->s3->rbuf.len = rlen;
s->s3->wbuf.len = wlen;
+ s->s3->init_extra = init_extra;
ssl_free_wbio_buffer(s);
}
s->init_num=0;
+ s->s3->flags &= ~SSL3_FLAGS_SGC_RESTART_DONE;
if (s->state != SSL_ST_RENEGOTIATE)
{
int ok;
long n;
+ /* We only allow the client to restart the handshake once per
+ * negotiation. */
+ if (s->s3->flags & SSL3_FLAGS_SGC_RESTART_DONE)
+ {
+ SSLerr(SSL_F_SSL3_CHECK_CLIENT_HELLO, SSL_R_MULTIPLE_SGC_RESTARTS);
+ return -1;
+ }
+
/* this function is called when we really expect a Certificate message,
* so permit appropriate message length */
n=s->method->ssl_get_message(s,
s->s3->tmp.ecdh = NULL;
}
#endif
+ s->s3->flags |= SSL3_FLAGS_SGC_RESTART_DONE;
return 2;
}
return 1;
if (i <= 0)
{
SSLerr(SSL_F_SSL3_GET_CLIENT_KEY_EXCHANGE,ERR_R_DH_LIB);
+ BN_clear_free(pub);
goto err;
}
#define SSL_F_SSL3_CALLBACK_CTRL 233
#define SSL_F_SSL3_CHANGE_CIPHER_STATE 129
#define SSL_F_SSL3_CHECK_CERT_AND_ALGORITHM 130
+#define SSL_F_SSL3_CHECK_CLIENT_HELLO 304
#define SSL_F_SSL3_CLIENT_HELLO 131
#define SSL_F_SSL3_CONNECT 132
#define SSL_F_SSL3_CTRL 213
#define SSL_R_MISSING_TMP_RSA_KEY 172
#define SSL_R_MISSING_TMP_RSA_PKEY 173
#define SSL_R_MISSING_VERIFY_MESSAGE 174
+#define SSL_R_MULTIPLE_SGC_RESTARTS 346
#define SSL_R_NON_SSLV2_INITIAL_PACKET 175
#define SSL_R_NO_CERTIFICATES_RETURNED 176
#define SSL_R_NO_CERTIFICATE_ASSIGNED 177
#define SSL3_FLAGS_POP_BUFFER 0x0004
#define TLS1_FLAGS_TLS_PADDING_BUG 0x0008
#define TLS1_FLAGS_SKIP_CERT_VERIFY 0x0010
+
+/* SSL3_FLAGS_SGC_RESTART_DONE is set when we
+ * restart a handshake because of MS SGC and so prevents us
+ * from restarting the handshake in a loop. It's reset on a
+ * renegotiation, so effectively limits the client to one restart
+ * per negotiation. This limits the possibility of a DDoS
+ * attack where the client handshakes in a loop using SGC to
+ * restart. Servers which permit renegotiation can still be
+ * effected, but we can't prevent that.
+ */
+#define SSL3_FLAGS_SGC_RESTART_DONE 0x0040
typedef struct ssl3_state_st
{
sk_SSL_COMP_push(ssl_comp_methods,comp);
}
}
+ sk_SSL_COMP_sort(ssl_comp_methods);
}
MemCheck_on();
}
/* ssl/ssl_err.c */
/* ====================================================================
- * Copyright (c) 1999-2009 The OpenSSL Project. All rights reserved.
+ * Copyright (c) 1999-2011 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
{ERR_FUNC(SSL_F_SSL3_CALLBACK_CTRL), "SSL3_CALLBACK_CTRL"},
{ERR_FUNC(SSL_F_SSL3_CHANGE_CIPHER_STATE), "SSL3_CHANGE_CIPHER_STATE"},
{ERR_FUNC(SSL_F_SSL3_CHECK_CERT_AND_ALGORITHM), "SSL3_CHECK_CERT_AND_ALGORITHM"},
+{ERR_FUNC(SSL_F_SSL3_CHECK_CLIENT_HELLO), "SSL3_CHECK_CLIENT_HELLO"},
{ERR_FUNC(SSL_F_SSL3_CLIENT_HELLO), "SSL3_CLIENT_HELLO"},
{ERR_FUNC(SSL_F_SSL3_CONNECT), "SSL3_CONNECT"},
{ERR_FUNC(SSL_F_SSL3_CTRL), "SSL3_CTRL"},
{ERR_REASON(SSL_R_MISSING_TMP_RSA_KEY) ,"missing tmp rsa key"},
{ERR_REASON(SSL_R_MISSING_TMP_RSA_PKEY) ,"missing tmp rsa pkey"},
{ERR_REASON(SSL_R_MISSING_VERIFY_MESSAGE),"missing verify message"},
+{ERR_REASON(SSL_R_MULTIPLE_SGC_RESTARTS) ,"multiple sgc restarts"},
{ERR_REASON(SSL_R_NON_SSLV2_INITIAL_PACKET),"non sslv2 initial packet"},
{ERR_REASON(SSL_R_NO_CERTIFICATES_RETURNED),"no certificates returned"},
{ERR_REASON(SSL_R_NO_CERTIFICATE_ASSIGNED),"no certificate assigned"},
s->max_cert_list=larg;
return(l);
case SSL_CTRL_SET_MTU:
+ if (larg < (long)dtls1_min_mtu())
+ return 0;
+
if (SSL_version(s) == DTLS1_VERSION ||
SSL_version(s) == DTLS1_BAD_VER)
{
int dtls1_is_timer_expired(SSL *s);
void dtls1_double_timeout(SSL *s);
int dtls1_send_newsession_ticket(SSL *s);
+unsigned int dtls1_min_mtu(void);
/* some client-only functions */
int ssl3_client_hello(SSL *s);
sdata = data;
if (dsize > 0)
{
+ if (s->tlsext_ocsp_exts)
+ {
+ sk_X509_EXTENSION_pop_free(s->tlsext_ocsp_exts,
+ X509_EXTENSION_free);
+ }
+
s->tlsext_ocsp_exts =
d2i_X509_EXTENSIONS(NULL,
&sdata, dsize);
-dummytest.c
\ No newline at end of file
+../crypto/md2/md2test.c
\ No newline at end of file
-dummytest.c
\ No newline at end of file
+../crypto/rc5/rc5test.c
\ No newline at end of file
$ssltest $extra || exit 1
if [ $dsa_cert = NO ]; then
- echo test sslv2/sslv3 w/o DHE via BIO pair
- $ssltest -bio_pair -no_dhe $extra || exit 1
+ echo 'test sslv2/sslv3 w/o (EC)DHE via BIO pair'
+ $ssltest -bio_pair -no_dhe -no_ecdhe $extra || exit 1
fi
echo test sslv2/sslv3 with 1024bit DHE via BIO pair
if ../util/shlib_wrap.sh ../apps/openssl no-rsa; then
echo skipping RSA tests
else
- echo test tls1 with 1024bit RSA, no DHE, multiple handshakes
- ../util/shlib_wrap.sh ./ssltest -v -bio_pair -tls1 -cert ../apps/server2.pem -no_dhe -num 10 -f -time $extra || exit 1
+ echo 'test tls1 with 1024bit RSA, no (EC)DHE, multiple handshakes'
+ ../util/shlib_wrap.sh ./ssltest -v -bio_pair -tls1 -cert ../apps/server2.pem -no_dhe -no_ecdhe -num 10 -f -time $extra || exit 1
if ../util/shlib_wrap.sh ../apps/openssl no-dh; then
echo skipping RSA+DHE tests
my $openssl;
-my $dir = "/usr/local/ssl";
-my $prefix = "/usr/local/ssl";
+my $dir = "/usr/ssl";
+my $prefix = "/usr";
if(defined $ENV{OPENSSL}) {
$openssl = $ENV{OPENSSL};
undef %err_reason_strings;
}
-if($debug && defined(%notrans)) {
+if($debug && %notrans) {
print STDERR "The following function codes were not translated:\n";
foreach(sort keys %notrans)
{
projects / framework / security / openssl.git / commitdiff