1 # Makefile.in generated by automake 1.11 from Makefile.am.
4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
7 # This Makefile.in is free software; the Free Software Foundation
8 # gives unlimited permission to copy and/or distribute it,
9 # with or without modifications, as long as this notice is preserved.
11 # This program is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
19 pkgdatadir = $(datadir)/@PACKAGE@
20 pkgincludedir = $(includedir)/@PACKAGE@
21 pkglibdir = $(libdir)/@PACKAGE@
22 pkglibexecdir = $(libexecdir)/@PACKAGE@
23 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
24 install_sh_DATA = $(install_sh) -c -m 644
25 install_sh_PROGRAM = $(install_sh) -c
26 install_sh_SCRIPT = $(install_sh) -c
27 INSTALL_HEADER = $(INSTALL_DATA)
28 transform = $(program_transform_name)
35 build_triplet = @build@
37 DIST_COMMON = README $(dist_noinst_DATA) $(srcdir)/Makefile.am \
38 $(srcdir)/Makefile.in $(srcdir)/commands.sh.in \
39 $(top_srcdir)/config/include-Makefile.am
41 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
42 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
43 $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
44 $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
45 $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
46 $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
47 $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
48 $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
49 $(top_srcdir)/m4/tls.m4 $(top_srcdir)/configure.ac
50 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
52 mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
53 CONFIG_HEADER = $(top_builddir)/config.h
54 CONFIG_CLEAN_FILES = commands.sh
55 CONFIG_CLEAN_VPATH_FILES =
58 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
59 html-recursive info-recursive install-data-recursive \
60 install-dvi-recursive install-exec-recursive \
61 install-html-recursive install-info-recursive \
62 install-pdf-recursive install-ps-recursive install-recursive \
63 installcheck-recursive installdirs-recursive pdf-recursive \
64 ps-recursive uninstall-recursive
65 DATA = $(dist_noinst_DATA)
66 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
67 distclean-recursive maintainer-clean-recursive
68 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
69 $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
73 DIST_SUBDIRS = $(SUBDIRS)
74 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
77 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
78 sed_rest='s,^[^/]*/*,,'; \
79 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
80 sed_butlast='s,/*[^/]*$$,,'; \
81 while test -n "$$dir1"; do \
82 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
83 if test "$$first" != "."; then \
84 if test "$$first" = ".."; then \
85 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
86 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
88 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
89 if test "$$first2" = "$$first"; then \
90 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
94 dir0="$$dir0"/"$$first"; \
97 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
103 AUTOCONF = @AUTOCONF@
104 AUTOHEADER = @AUTOHEADER@
105 AUTOMAKE = @AUTOMAKE@
108 BLKID_CFLAGS = @BLKID_CFLAGS@
109 BLKID_LIBS = @BLKID_LIBS@
110 BLKID_LIBS_STATIC = @BLKID_LIBS_STATIC@
112 CCDEPMODE = @CCDEPMODE@
115 CPPFLAGS = @CPPFLAGS@
116 CYGPATH_W = @CYGPATH_W@
119 DSYMUTIL = @DSYMUTIL@
130 INSTALL_DATA = @INSTALL_DATA@
131 INSTALL_PROGRAM = @INSTALL_PROGRAM@
132 INSTALL_SCRIPT = @INSTALL_SCRIPT@
133 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
134 INTLLIBS = @INTLLIBS@
137 LIBBLKID_VERSION = @LIBBLKID_VERSION@
138 LIBBLKID_VERSION_INFO = @LIBBLKID_VERSION_INFO@
139 LIBICONV = @LIBICONV@
144 LIBUUID_VERSION = @LIBUUID_VERSION@
145 LIBUUID_VERSION_INFO = @LIBUUID_VERSION_INFO@
148 LTLIBICONV = @LTLIBICONV@
149 LTLIBINTL = @LTLIBINTL@
150 LTLIBOBJS = @LTLIBOBJS@
151 MAKEINFO = @MAKEINFO@
153 MKINSTALLDIRS = @MKINSTALLDIRS@
155 MSGMERGE = @MSGMERGE@
156 NCURSES_LIBS = @NCURSES_LIBS@
164 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
165 PACKAGE_NAME = @PACKAGE_NAME@
166 PACKAGE_STRING = @PACKAGE_STRING@
167 PACKAGE_TARNAME = @PACKAGE_TARNAME@
168 PACKAGE_VERSION = @PACKAGE_VERSION@
169 PATH_SEPARATOR = @PATH_SEPARATOR@
171 PKG_CONFIG = @PKG_CONFIG@
175 SELINUX_LIBS = @SELINUX_LIBS@
176 SELINUX_LIBS_STATIC = @SELINUX_LIBS_STATIC@
177 SET_MAKE = @SET_MAKE@
180 SUID_CFLAGS = @SUID_CFLAGS@
181 SUID_LDFLAGS = @SUID_LDFLAGS@
183 UUID_CFLAGS = @UUID_CFLAGS@
184 UUID_LIBS = @UUID_LIBS@
187 XGETTEXT = @XGETTEXT@
188 abs_builddir = @abs_builddir@
189 abs_srcdir = @abs_srcdir@
190 abs_top_builddir = @abs_top_builddir@
191 abs_top_srcdir = @abs_top_srcdir@
192 ac_ct_CC = @ac_ct_CC@
193 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
194 am__include = @am__include@
195 am__leading_dot = @am__leading_dot@
196 am__quote = @am__quote@
198 am__untar = @am__untar@
201 build_alias = @build_alias@
202 build_cpu = @build_cpu@
203 build_os = @build_os@
204 build_vendor = @build_vendor@
205 builddir = @builddir@
207 datarootdir = @datarootdir@
210 exec_prefix = @exec_prefix@
212 host_alias = @host_alias@
213 host_cpu = @host_cpu@
215 host_vendor = @host_vendor@
217 includedir = @includedir@
219 install_sh = @install_sh@
221 libdirname = @libdirname@
222 libexecdir = @libexecdir@
223 localedir = @localedir@
224 localstatedir = @localstatedir@
228 oldincludedir = @oldincludedir@
231 program_transform_name = @program_transform_name@
234 sharedstatedir = @sharedstatedir@
236 sysconfdir = @sysconfdir@
237 target_alias = @target_alias@
238 top_build_prefix = @top_build_prefix@
239 top_builddir = @top_builddir@
240 top_srcdir = @top_srcdir@
241 usrbin_execdir = @usrbin_execdir@
242 usrlib_execdir = @usrlib_execdir@
243 usrsbin_execdir = @usrsbin_execdir@
244 AM_CPPFLAGS = -include $(top_builddir)/config.h -I$(top_srcdir)/include \
245 -DLOCALEDIR=\"$(localedir)\"
247 AM_CFLAGS = -fsigned-char
250 # Automake (at least up to 1.10) mishandles dist_man_MANS inside conditionals.
251 # Unlike with other dist primaries, the files are not distributed if the
252 # conditional is false.
253 # Work the bug around until it is fixed:
254 dist_noinst_DATA = $(dist_man_MANS)
256 # Paths to in-tree libraries (use ul_ prefix to avoid possible collisions)
259 ul_libblkid_srcdir = $(top_srcdir)/shlibs/blkid/src
260 ul_libblkid_builddir = $(top_builddir)/shlibs/blkid/src
261 ul_libblkid_la = $(top_builddir)/shlibs/blkid/src/libblkid.la
264 ul_libuuid_srcdir = $(top_srcdir)/shlibs/uuid/src
265 ul_libuuid_builddir = $(top_builddir)/shlibs/uuid/src
266 ul_libuuid_la = $(top_builddir)/shlibs/uuid/src/libuuid.la
268 EXTRA_DIST = expected \
277 $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/config/include-Makefile.am $(am__configure_deps)
279 case '$(am__configure_deps)' in \
281 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
282 && { if test -f $@; then exit 0; else break; fi; }; \
286 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/Makefile'; \
287 $(am__cd) $(top_srcdir) && \
288 $(AUTOMAKE) --foreign tests/Makefile
290 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
293 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
295 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
296 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
299 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
300 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
302 $(top_srcdir)/configure: $(am__configure_deps)
303 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
304 $(ACLOCAL_M4): $(am__aclocal_m4_deps)
305 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
306 $(am__aclocal_m4_deps):
307 commands.sh: $(top_builddir)/config.status $(srcdir)/commands.sh.in
308 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
316 # This directory's subdirectories are mostly independent; you can cd
317 # into them and run `make' without going through this Makefile.
318 # To change the values of `make' variables: instead of editing Makefiles,
319 # (1) if the variable is set in `config.status', edit `config.status'
320 # (which will cause the Makefiles to be regenerated when you run `make');
321 # (2) otherwise, pass the desired values on the `make' command line.
322 $(RECURSIVE_TARGETS):
324 for f in x $$MAKEFLAGS; do \
327 *k*) failcom='fail=yes';; \
331 target=`echo $@ | sed s/-recursive//`; \
332 list='$(SUBDIRS)'; for subdir in $$list; do \
333 echo "Making $$target in $$subdir"; \
334 if test "$$subdir" = "."; then \
336 local_target="$$target-am"; \
338 local_target="$$target"; \
340 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
343 if test "$$dot_seen" = "no"; then \
344 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
347 $(RECURSIVE_CLEAN_TARGETS):
349 for f in x $$MAKEFLAGS; do \
352 *k*) failcom='fail=yes';; \
357 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
358 *) list='$(SUBDIRS)' ;; \
360 rev=''; for subdir in $$list; do \
361 if test "$$subdir" = "."; then :; else \
362 rev="$$subdir $$rev"; \
366 target=`echo $@ | sed s/-recursive//`; \
367 for subdir in $$rev; do \
368 echo "Making $$target in $$subdir"; \
369 if test "$$subdir" = "."; then \
370 local_target="$$target-am"; \
372 local_target="$$target"; \
374 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
376 done && test -z "$$fail"
378 list='$(SUBDIRS)'; for subdir in $$list; do \
379 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
382 list='$(SUBDIRS)'; for subdir in $$list; do \
383 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
386 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
387 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
388 unique=`for i in $$list; do \
389 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
391 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
392 END { if (nonempty) { for (i in files) print i; }; }'`; \
396 TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
397 $(TAGS_FILES) $(LISP)
400 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
401 include_option=--etags-include; \
404 include_option=--include; \
407 list='$(SUBDIRS)'; for subdir in $$list; do \
408 if test "$$subdir" = .; then :; else \
409 test ! -f $$subdir/TAGS || \
410 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
413 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
414 unique=`for i in $$list; do \
415 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
417 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
418 END { if (nonempty) { for (i in files) print i; }; }'`; \
420 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
421 test -n "$$unique" || unique=$$empty_fix; \
422 if test $$# -gt 0; then \
423 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
426 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
431 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
432 $(TAGS_FILES) $(LISP)
433 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
434 unique=`for i in $$list; do \
435 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
437 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
438 END { if (nonempty) { for (i in files) print i; }; }'`; \
439 test -z "$(CTAGS_ARGS)$$unique" \
440 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
444 here=`$(am__cd) $(top_builddir) && pwd` \
445 && $(am__cd) $(top_srcdir) \
446 && gtags -i $(GTAGS_ARGS) "$$here"
449 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
451 distdir: $(DISTFILES)
452 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
453 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
454 list='$(DISTFILES)'; \
455 dist_files=`for file in $$list; do echo $$file; done | \
456 sed -e "s|^$$srcdirstrip/||;t" \
457 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
458 case $$dist_files in \
459 */*) $(MKDIR_P) `echo "$$dist_files" | \
460 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
463 for file in $$dist_files; do \
464 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
465 if test -d $$d/$$file; then \
466 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
467 if test -d "$(distdir)/$$file"; then \
468 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
470 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
471 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
472 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
474 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
476 test -f "$(distdir)/$$file" \
477 || cp -p $$d/$$file "$(distdir)/$$file" \
481 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
482 if test "$$subdir" = .; then :; else \
483 test -d "$(distdir)/$$subdir" \
484 || $(MKDIR_P) "$(distdir)/$$subdir" \
488 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
489 if test "$$subdir" = .; then :; else \
490 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
492 new_distdir=$$reldir; \
493 dir1=$$subdir; dir2="$(top_distdir)"; \
495 new_top_distdir=$$reldir; \
496 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
497 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
498 ($(am__cd) $$subdir && \
499 $(MAKE) $(AM_MAKEFLAGS) \
500 top_distdir="$$new_top_distdir" \
501 distdir="$$new_distdir" \
502 am__remove_distdir=: \
503 am__skip_length_check=: \
504 am__skip_mode_fix=: \
510 check: check-recursive
511 all-am: Makefile $(DATA)
512 installdirs: installdirs-recursive
514 install: install-recursive
515 install-exec: install-exec-recursive
516 install-data: install-data-recursive
517 uninstall: uninstall-recursive
520 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
522 installcheck: installcheck-recursive
524 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
525 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
526 `test -z '$(STRIP)' || \
527 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
533 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
534 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
536 maintainer-clean-generic:
537 @echo "This command is intended for maintainers to use"
538 @echo "it deletes files that may require special tools to rebuild."
539 clean: clean-recursive
541 clean-am: clean-generic clean-libtool clean-local mostlyclean-am
543 distclean: distclean-recursive
545 distclean-am: clean-am distclean-generic distclean-tags
561 install-dvi: install-dvi-recursive
567 install-html: install-html-recursive
571 install-info: install-info-recursive
577 install-pdf: install-pdf-recursive
581 install-ps: install-ps-recursive
587 maintainer-clean: maintainer-clean-recursive
589 maintainer-clean-am: distclean-am maintainer-clean-generic
591 mostlyclean: mostlyclean-recursive
593 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
605 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
606 install-am install-strip tags-recursive
608 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
609 all all-am check check-am clean clean-generic clean-libtool \
610 clean-local ctags ctags-recursive distclean distclean-generic \
611 distclean-libtool distclean-tags distdir dvi dvi-am html \
612 html-am info info-am install install-am install-data \
613 install-data-am install-dvi install-dvi-am install-exec \
614 install-exec-am install-html install-html-am install-info \
615 install-info-am install-man install-pdf install-pdf-am \
616 install-ps install-ps-am install-strip installcheck \
617 installcheck-am installdirs installdirs-am maintainer-clean \
618 maintainer-clean-generic mostlyclean mostlyclean-generic \
619 mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
620 uninstall uninstall-am
624 $(MAKE) -C $(ul_libblkid_builddir)
627 $(MAKE) -C $(ul_libuuid_builddir)
632 # Tell versions [3.59,3.63) of GNU make to not export all variables.
633 # Otherwise a system limit (for SysV at least) may be exceeded.