1 # Copyright 1988, 1990-1992, 1994-2000, 2002-2003, 2007-2012 Free
2 # Software Foundation, Inc.
4 # This program is free software; you can redistribute it and/or modify
5 # it under the terms of the GNU General Public License as published by
6 # the Free Software Foundation; either version 3 of the License, or
7 # (at your option) any later version.
9 # This program is distributed in the hope that it will be useful,
10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 # GNU General Public License for more details.
14 # You should have received a copy of the GNU General Public License
15 # along with this program. If not, see <http://www.gnu.org/licenses/>.
17 # This file was written by Rob Savoye. (rob@cygnus.com)
19 if { [prepare_for_testing break.exp "break" {break.c break1.c} {debug nowarnings}] } {
25 # test simple breakpoint setting commands
28 # Test deleting all breakpoints when there are none installed,
29 # GDB should not prompt for confirmation.
30 # Note that lib/gdb.exp provides a "delete_breakpoints" proc
31 # for general use elsewhere.
33 send_gdb "delete breakpoints\n"
35 -re "Delete all breakpoints.*$" {
39 fail "Delete all breakpoints when none (unexpected prompt)"
41 timeout { fail "Delete all breakpoints when none (timeout after unexpected prompt)" }
44 -re ".*$gdb_prompt $" { pass "Delete all breakpoints when none" }
45 timeout { fail "Delete all breakpoints when none (timeout)" }
49 # test break at function
51 gdb_test "break main" \
52 "Breakpoint.*at.* file .*$srcfile, line.*" \
56 # test break at quoted function
58 gdb_test "break \"marker2\"" \
59 "Breakpoint.*at.* file .*$srcfile1, line.*" \
60 "breakpoint quoted function"
63 # test break at function in file
65 gdb_test "break $srcfile:factorial" \
66 "Breakpoint.*at.* file .*$srcfile, line.*" \
67 "breakpoint function in file"
69 set bp_location1 [gdb_get_line_number "set breakpoint 1 here"]
72 # test break at line number
74 # Note that the default source file is the last one whose source text
75 # was printed. For native debugging, before we've executed the
76 # program, this is the file containing main, but for remote debugging,
77 # it's wherever the processor was stopped when we connected to the
78 # board. So, to be sure, we do a list command.
80 gdb_test "list main" \
81 ".*main \\(argc, argv, envp\\).*" \
82 "use `list' to establish default source file"
83 gdb_test "break $bp_location1" \
84 "Breakpoint.*at.* file .*$srcfile, line $bp_location1\\." \
85 "breakpoint line number"
88 # test duplicate breakpoint
90 gdb_test "break $bp_location1" \
91 "Note: breakpoint \[0-9\]+ also set at pc.*Breakpoint \[0-9\]+ at.* file .*$srcfile, line $bp_location1\\." \
92 "breakpoint duplicate"
94 set bp_location2 [gdb_get_line_number "set breakpoint 2 here"]
97 # test break at line number in file
99 gdb_test "break $srcfile:$bp_location2" \
100 "Breakpoint.*at.* file .*$srcfile, line $bp_location2\\." \
101 "breakpoint line number in file"
103 set bp_location3 [gdb_get_line_number "set breakpoint 3 here"]
104 set bp_location4 [gdb_get_line_number "set breakpoint 4 here"]
107 # Test putting a break at the start of a multi-line if conditional.
108 # Verify the breakpoint was put at the start of the conditional.
110 gdb_test "break multi_line_if_conditional" \
111 "Breakpoint.*at.* file .*$srcfile, line $bp_location3\\." \
112 "breakpoint at start of multi line if conditional"
114 gdb_test "break multi_line_while_conditional" \
115 "Breakpoint.*at.* file .*$srcfile, line $bp_location4\\." \
116 "breakpoint at start of multi line while conditional"
118 set bp_location6 [gdb_get_line_number "set breakpoint 6 here"]
120 set main_line $bp_location6
122 if {$hp_aCC_compiler} {
123 set proto "\\(int\\)"
128 set bp_location7 [gdb_get_line_number "set breakpoint 7 here"]
129 set bp_location8 [gdb_get_line_number "set breakpoint 8 here" $srcfile1]
130 set bp_location9 [gdb_get_line_number "set breakpoint 9 here" $srcfile1]
132 gdb_test "info break" \
133 "Num Type\[ \]+Disp Enb Address\[ \]+What.*
134 \[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$main_line.*
135 \[0-9\]+\[\t \]+breakpoint keep y.* in marker2 at .*$srcfile1:($bp_location8|$bp_location9).*
136 \[0-9\]+\[\t \]+breakpoint keep y.* in factorial$proto at .*$srcfile:$bp_location7.*
137 \[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$bp_location1.*
138 \[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$bp_location1.*
139 \[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$bp_location2.*
140 \[0-9\]+\[\t \]+breakpoint keep y.* in multi_line_if_conditional at .*$srcfile:$bp_location3.*
141 \[0-9\]+\[\t \]+breakpoint keep y.* in multi_line_while_conditional at .*$srcfile:$bp_location4" \
145 # Test info breakpoint with arguments
155 gdb_test_multiple "info break 2 4 6" "info break 2 4 6" {
156 -re "1\[\t \]+breakpoint *keep y\[^\r\n\]*:$main_line\[^\r\n\]*" {
160 -re "2\[\t \]+breakpoint *keep y\[^\r\n\]* in marker2 at \[^\r\n\]*" {
164 -re "3\[\t \]+breakpoint *keep y\[^\r\n\]*$bp_location7\[^\r\n\]*" {
168 -re "4\[\t \]+breakpoint *keep y\[^\r\n\]*$bp_location1\[^\r\n\]*" {
172 -re "5\[\t \]+breakpoint *keep y\[^\r\n\]*$bp_location1\[^\r\n\]*" {
176 -re "6\[\t \]+breakpoint *keep y\[^\r\n\]*$bp_location2\[^\r\n\]*" {
180 -re ".*$gdb_prompt $" {
181 if { !$see1 && $see2 && !$see3 && $see4 && !$see5 && $see6 } then {
182 pass "info break 2 4 6"
184 fail "info break 2 4 6"
196 gdb_test_multiple "info break 3-5" "info break 3-5" {
197 -re "1\[\t \]+breakpoint *keep y.* in main at .*:$main_line\[^\r\n\]*" {
201 -re "2\[\t \]+breakpoint *keep y\[^\r\n\]* in marker2 at \[^\r\n\]*" {
205 -re "3\[\t \]+breakpoint *keep y\[^\r\n\]*$bp_location7\[^\r\n\]*" {
209 -re "4\[\t \]+breakpoint *keep y\[^\r\n\]*$bp_location1\[^\r\n\]*" {
213 -re "5\[\t \]+breakpoint *keep y\[^\r\n\]*$bp_location1\[^\r\n\]*" {
217 -re "6\[\t \]+breakpoint *keep y\[^\r\n\]*$bp_location2\[^\r\n\]*" {
221 -re ".*$gdb_prompt $" {
222 if { !$see1 && !$see2 && $see3 && $see4 && $see5 && !$see6 } then {
223 pass "info break 3-5"
225 fail "info break 3-5"
231 # Test disable/enable with arguments
234 # Test with value history
236 gdb_test "print 1" "" ""
237 gdb_test "print 2" "" ""
238 gdb_test "print 3" "" ""
239 gdb_test "print 4" "" ""
240 gdb_test "print 5" "" ""
241 gdb_test "print 6" "" ""
243 # $2 is 2 and $$ is 5
244 gdb_test_no_output "disable \$2 \$\$" "disable using history values"
253 gdb_test_multiple "info break" "check disable with history values" {
254 -re "1\[\t \]+breakpoint *keep y.* in main at .*:$main_line\[^\r\n\]*" {
258 -re "2\[\t \]+breakpoint *keep n\[^\r\n\]* in marker2 at \[^\r\n\]*" {
262 -re "3\[\t \]+breakpoint *keep y\[^\r\n\]*$bp_location7\[^\r\n\]*" {
266 -re "4\[\t \]+breakpoint *keep y\[^\r\n\]*$bp_location1\[^\r\n\]*" {
270 -re "5\[\t \]+breakpoint *keep n\[^\r\n\]*$bp_location1\[^\r\n\]*" {
274 -re "6\[\t \]+breakpoint *keep y\[^\r\n\]*$bp_location2\[^\r\n\]*" {
278 -re ".*$gdb_prompt $" {
279 if { $see1 && $see2 && $see3 && $see4 && $see5 && $see6 } then {
280 pass "check disable with history values"
282 fail "check disable with history values"
287 gdb_test "enable" "" ""
288 gdb_test "set \$foo = 3" "" ""
289 gdb_test "set \$bar = 6" "" ""
290 gdb_test_no_output "disable \$foo \$bar" "disable with convenience values"
299 gdb_test_multiple "info break" "check disable with convenience values" {
300 -re "1\[\t \]+breakpoint *keep y.* in main at .*:$main_line\[^\r\n\]*" {
304 -re "2\[\t \]+breakpoint *keep y\[^\r\n\]* in marker2 at \[^\r\n\]*" {
308 -re "3\[\t \]+breakpoint *keep n\[^\r\n\]*$bp_location7\[^\r\n\]*" {
312 -re "4\[\t \]+breakpoint *keep y\[^\r\n\]*$bp_location1\[^\r\n\]*" {
316 -re "5\[\t \]+breakpoint *keep y\[^\r\n\]*$bp_location1\[^\r\n\]*" {
320 -re "6\[\t \]+breakpoint *keep n\[^\r\n\]*$bp_location2\[^\r\n\]*" {
324 -re ".*$gdb_prompt $" {
325 if { $see1 && $see2 && $see3 && $see4 && $see5 && $see6 } then {
326 pass "check disable with convenience values"
328 fail "check disable with convenience values"
333 # test with bad values
335 gdb_test "enable" "" ""
336 gdb_test "disable 10" "No breakpoint number 10." \
337 "disable non-existent breakpoint 10"
339 gdb_test "set \$baz 1.234"
340 gdb_test "disable \$baz" \
341 "Convenience variable must have integer value.*" \
342 "disable with non-integer convenience var"
343 gdb_test "disable \$grbx" \
344 "Convenience variable must have integer value.*" \
345 "disable with non-existent convenience var"
346 gdb_test "disable \$10" \
347 "History has not yet reached .10." \
348 "disable with non-existent history value"
349 gdb_test "disable \$1foo" \
350 "Convenience variable must have integer value.*" \
351 "disable with badly formed history value"
353 # FIXME: The rest of this test doesn't work with anything that can't
355 # Huh? There doesn't *appear* to be anything that passes arguments
359 # run until the breakpoint at main is hit. For non-stubs-using targets.
363 -re "Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$srcfile:$bp_location6.*$bp_location6\[\t \]+if .argc.* \{.*$gdb_prompt $" {
364 pass "run until function breakpoint"
366 -re "$gdb_prompt $" {
367 fail "run until function breakpoint"
370 fail "run until function breakpoint (timeout)"
375 # run until the breakpoint at a line number
377 gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location1.*$bp_location1\[\t \]+printf.*factorial.*" \
378 "run until breakpoint set at a line number"
381 # Run until the breakpoint set in a function in a file
383 for {set i 6} {$i >= 1} {incr i -1} {
384 gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, factorial \\(value=$i\\) at .*$srcfile:$bp_location7.*$bp_location7\[\t \]+.*if .value > 1. \{.*" \
385 "run until file:function($i) breakpoint"
389 # Run until the breakpoint set at a quoted function
391 gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, (0x\[0-9a-f\]+ in )?marker2 \\(a=43\\) at .*$srcfile1:($bp_location8|$bp_location9).*" \
392 "run until quoted breakpoint"
394 # run until the file:function breakpoint at a line number in a file
396 gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location2.*$bp_location2\[\t \]+argc = \\(argc == 12345\\);.*" \
397 "run until file:linenum breakpoint"
399 # Test break at offset +1
400 set bp_location10 [gdb_get_line_number "set breakpoint 10 here"]
402 gdb_test "break +1" \
403 "Breakpoint.*at.* file .*$srcfile, line $bp_location10\\." \
404 "breakpoint offset +1"
406 # Check to see if breakpoint is hit when stepped onto
409 ".*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location10.*$bp_location10\[\t \]+return argc;.*breakpoint 10 here.*" \
410 "step onto breakpoint"
412 # Check to see if breakpoint can be set on ending brace of function
413 set bp_location10a [gdb_get_line_number "set breakpoint 10a here"]
415 gdb_test "break $bp_location10a" \
416 "Breakpoint.*at.* file .*$srcfile, line $bp_location10a\\." \
417 "setting breakpoint at }"
419 gdb_test "continue" \
420 ".*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location10a.*$bp_location10a\[\t \]+}.*breakpoint 10a here.*" \
421 "continue to breakpoint at }"
424 # delete all breakpoints so we can start over, course this can be a test too
429 # test temporary breakpoint at function
432 gdb_test "tbreak main" "Temporary breakpoint.*at.* file .*$srcfile, line.*" "Temporary breakpoint function"
435 # test break at function in file
438 gdb_test "tbreak $srcfile:factorial" "Temporary breakpoint.*at.* file .*$srcfile, line.*" \
439 "Temporary breakpoint function in file"
442 # test break at line number
444 gdb_test "tbreak $bp_location1" \
445 "Temporary breakpoint.*at.* file .*$srcfile, line $bp_location1.*" \
446 "Temporary breakpoint line number #1"
448 gdb_test "tbreak $bp_location6" "Temporary breakpoint.*at.* file .*$srcfile, line $bp_location6.*" "Temporary breakpoint line number #2"
451 # test break at line number in file
453 gdb_test "tbreak $srcfile:$bp_location2" \
454 "Temporary breakpoint.*at.* file .*$srcfile, line $bp_location2.*" \
455 "Temporary breakpoint line number in file #1"
457 set bp_location11 [gdb_get_line_number "set breakpoint 11 here"]
458 gdb_test "tbreak $srcfile:$bp_location11" "Temporary breakpoint.*at.* file .*$srcfile, line $bp_location11.*" "Temporary breakpoint line number in file #2"
461 # check to see what breakpoints are set (temporary this time)
463 gdb_test "info break" "Num Type.*Disp Enb Address.*What.*\[\r\n\]
464 \[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$main_line.*\[\r\n\]
465 \[0-9\]+\[\t \]+breakpoint del.*y.*in factorial$proto at .*$srcfile:$bp_location7.*\[\r\n\]
466 \[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location1.*\[\r\n\]
467 \[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location6.*\[\r\n\]
468 \[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location2.*\[\r\n\]
469 \[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location11.*" \
470 "Temporary breakpoint info"
475 # Verify that catchpoints for fork, vfork and exec don't trigger
476 # inappropriately. (There are no calls to those system functions
477 # in this test program.)
479 if ![runto_main] then { fail "break tests suppressed" }
482 "Catch requires an event name." \
483 "catch requires an event name"
486 set name "set catch fork, never expected to trigger"
487 gdb_test_multiple "catch fork" "$name" {
488 -re "Catchpoint \[0-9\]* .fork..*$gdb_prompt $" {
491 -re "Catch of fork not yet implemented.*$gdb_prompt $" {
497 # If we are on HP-UX 10.20, we expect an error message to be
498 # printed if we type "catch vfork" at the gdb gdb_prompt. This is
499 # because on HP-UX 10.20, we cannot catch vfork events.
501 set name "set catch vfork, never expected to trigger"
503 if [istarget "hppa*-hp-hpux10.20"] then {
504 gdb_test "catch vfork" \
505 "Catch of vfork events not supported on HP-UX 10.20..*" \
508 gdb_test_multiple "catch vfork" "$name" {
509 -re "Catchpoint \[0-9\]* .vfork..*$gdb_prompt $" {
512 -re "Catch of vfork not yet implemented.*$gdb_prompt $" {
518 set name "set catch exec, never expected to trigger"
519 gdb_test_multiple "catch exec" "$name" {
520 -re "Catchpoint \[0-9\]* .exec..*$gdb_prompt $" {
523 -re "Catch of exec not yet implemented.*$gdb_prompt $" {
528 # Verify that GDB responds gracefully when asked to set a breakpoint
529 # on a nonexistent source line.
531 gdb_test_no_output "set breakpoint pending off"
532 gdb_test "break 999" \
533 "No line 999 in the current file." \
534 "break on non-existent source line"
536 # Run to the desired default location. If not positioned here, the
537 # tests below don't work.
539 gdb_test "until $bp_location1" "main .* at .*:$bp_location1.*" \
542 # Verify that GDB allows one to just say "break", which is treated
543 # as the "default" breakpoint. Note that GDB gets cute when printing
544 # the informational message about other breakpoints at the same
545 # location. We'll hit that bird with this stone too.
547 gdb_test "break" "Breakpoint \[0-9\]*.*" \
548 "break on default location, 1st time"
551 "Note: breakpoint \[0-9\]* also set at .*Breakpoint \[0-9\]*.*" \
552 "break on default location, 2nd time"
555 "Note: breakpoints \[0-9\]* and \[0-9\]* also set at .*Breakpoint \[0-9\]*.*" \
556 "break on default location, 3rd time"
559 "Note: breakpoints \[0-9\]*, \[0-9\]* and \[0-9\]* also set at .*Breakpoint \[0-9\]*.*" \
560 "break on default location, 4th time"
562 # Verify that a "silent" breakpoint can be set, and that GDB is indeed
563 # "silent" about its triggering.
565 if ![runto_main] then { fail "break tests suppressed" }
567 gdb_test_multiple "break $bp_location1" \
568 "set to-be-silent break bp_location1" {
569 -re "Breakpoint (\[0-9\]*) at .*, line $bp_location1.*$gdb_prompt $" {
570 pass "set to-be-silent break bp_location1"
574 gdb_test "commands $expect_out(1,string)\nsilent\nend" ">end" "set silent break bp_location1"
576 gdb_test "info break $expect_out(1,string)" \
577 "\[0-9\]*\[ \t\]*breakpoint.*:$bp_location1\r\n\[ \t\]*silent.*" \
578 "info silent break bp_location1"
580 gdb_test "continue" "Continuing." \
581 "hit silent break bp_location1"
583 gdb_test "bt" "#0 main .* at .*:$bp_location1.*" \
584 "stopped for silent break bp_location1"
586 # Verify that GDB can at least parse a breakpoint with the
587 # "thread" keyword. (We won't attempt to test here that a
588 # thread-specific breakpoint really triggers appropriately.
589 # The gdb.threads subdirectory contains tests for that.)
591 set bp_location12 [gdb_get_line_number "set breakpoint 12 here"]
592 gdb_test "break $bp_location12 thread 999" "Unknown thread 999.*" \
593 "thread-specific breakpoint on non-existent thread disallowed"
595 gdb_test "break $bp_location12 thread foo" \
596 "Junk after thread keyword.*" \
597 "thread-specific breakpoint on bogus thread ID disallowed"
599 # Verify that GDB responds gracefully to a breakpoint command with
602 gdb_test "break $bp_location12 foo" \
603 "malformed linespec error: unexpected string, \"foo\".*" \
604 "breakpoint with trailing garbage disallowed"
606 # Verify that GDB responds gracefully to a "clear" command that has
607 # no matching breakpoint. (First, get us off the current source line,
608 # which we know has a breakpoint.)
610 gdb_test "next" "marker1.*" "step over breakpoint"
612 gdb_test "clear 81" "No breakpoint at 81.*" \
613 "clear line has no breakpoint disallowed"
615 gdb_test "clear" "No breakpoint at this line.*" \
616 "clear current line has no breakpoint disallowed"
618 # Verify that we can set and clear multiple breakpoints.
620 # We don't test that it deletes the correct breakpoints. We do at
621 # least test that it deletes more than one breakpoint.
623 gdb_test "break marker3" "Breakpoint.*at.*" "break marker3 #1"
624 gdb_test "break marker3" "Breakpoint.*at.*" "break marker3 #2"
625 gdb_test "clear marker3" {Deleted breakpoints [0-9]+ [0-9]+.*}
627 # Verify that a breakpoint can be set via a convenience variable.
629 gdb_test_no_output "set \$foo=$bp_location11" \
630 "set convenience variable \$foo to bp_location11"
632 gdb_test "break \$foo" \
633 "Breakpoint (\[0-9\]*) at .*, line $bp_location11.*" \
634 "set breakpoint via convenience variable"
636 # Verify that GDB responds gracefully to an attempt to set a
637 # breakpoint via a convenience variable whose type is not integer.
639 gdb_test_no_output "set \$foo=81.5" \
640 "set convenience variable \$foo to 81.5"
642 gdb_test "break \$foo" \
643 "Convenience variables used in line specs must have integer values.*" \
644 "set breakpoint via non-integer convenience variable disallowed"
646 # Verify that we can set and trigger a breakpoint in a user-called function.
648 gdb_test "break marker2" \
649 "Breakpoint (\[0-9\]*) at .*, line ($bp_location8|$bp_location9).*" \
650 "set breakpoint on to-be-called function"
652 gdb_test "print marker2(99)" \
653 "The program being debugged stopped while in a function called from GDB.\r\nEvaluation of the expression containing the function\r\n.marker2$proto. will be abandoned.\r\nWhen the function is done executing, GDB will silently stop.*" \
654 "hit breakpoint on called function"
656 # As long as we're stopped (breakpointed) in a called function,
657 # verify that we can successfully backtrace & such from here.
659 # In this and the following test, the _sr4export check apparently is needed
662 gdb_test_multiple "bt" "backtrace while in called function" {
663 -re "#0\[ \t\]*($hex in )?marker2.*:($bp_location8|$bp_location9)\r\n#1.*_sr4export.*$gdb_prompt $" {
664 pass "backtrace while in called function"
666 -re "#0\[ \t\]*($hex in )?marker2.*:($bp_location8|$bp_location9)\r\n#1.*function called from gdb.*$gdb_prompt $" {
667 pass "backtrace while in called function"
671 # Return from the called function. For remote targets, it's important to do
672 # this before runto_main, which otherwise may silently stop on the dummy
673 # breakpoint inserted by GDB at the program's entry point.
675 gdb_test_multiple "finish" "finish from called function" {
676 -re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.* in _sr4export.*$gdb_prompt $" {
677 pass "finish from called function"
679 -re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.*function called from gdb.*$gdb_prompt $" {
680 pass "finish from called function"
682 -re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.*Value returned.*$gdb_prompt $" {
683 pass "finish from called function"
687 # Verify that GDB responds gracefully to a "finish" command with
690 if ![runto_main] then { fail "break tests suppressed" }
692 send_gdb "finish 123\n"
694 -re "The \"finish\" command does not take any arguments.\r\n$gdb_prompt $"\
695 {pass "finish with arguments disallowed"}
697 {fail "finish with arguments disallowed"}
698 timeout {fail "(timeout) finish with arguments disallowed"}
701 # Verify that GDB responds gracefully to a request to "finish" from
702 # the outermost frame. On a stub that never exits, this will just
703 # run to the stubs routine, so we don't get this error... Thus the
707 gdb_test_multiple "finish" "finish from outermost frame disallowed" {
708 -re "\"finish\" not meaningful in the outermost frame.\r\n$gdb_prompt $" {
709 pass "finish from outermost frame disallowed"
711 -re "Run till exit from.*\r\n$gdb_prompt $" {
712 pass "finish from outermost frame disallowed"
716 # Verify that we can explicitly ask GDB to stop on all shared library
717 # events, and that it does so.
719 if [istarget "hppa*-*-hpux*"] then {
720 if ![runto_main] then { fail "break tests suppressed" }
722 gdb_test_no_output "set stop-on-solib-events 1" \
723 "set stop-on-solib-events"
726 "Stopped due to shared library event.*" \
727 "triggered stop-on-solib-events" \
728 "Start it from the beginning.*y or n. $" \
731 gdb_test_no_output "set stop-on-solib-events 0" \
732 "reset stop-on-solib-events"
735 # Hardware breakpoints are unsupported on HP-UX. Verify that GDB
736 # gracefully responds to requests to create them.
738 if [istarget "hppa*-*-hpux*"] then {
739 if ![runto_main] then { fail "break tests suppressed" }
742 "No hardware breakpoint support in the target.*" \
743 "hw breaks disallowed"
746 "No hardware breakpoint support in the target.*" \
747 "temporary hw breaks disallowed"
754 # Test "next" over recursive function call.
757 proc test_next_with_recursion {} {
762 gdb_test "kill" "" "kill program" "Kill the program being debugged.*y or n. $" "y"
765 gdb_test "break factorial" "Breakpoint $decimal at .*" "break at factorial"
767 # Run until we call factorial with 6
771 -re "Break.* factorial .value=6. .*$gdb_prompt $" {}
772 -re ".*$gdb_prompt $" {
773 fail "run to factorial(6)";
776 timeout { fail "run to factorial(6) (timeout)" ; gdb_suppress_tests }
779 # Continue until we call factorial recursively with 5.
781 if [gdb_test "continue" \
782 "Continuing.*Break.* factorial .value=5. .*" \
783 "continue to factorial(5)"] then { gdb_suppress_tests }
785 # Do a backtrace just to confirm how many levels deep we are.
787 if [gdb_test "backtrace" \
788 "#0\[ \t\]+ factorial .value=5..*" \
789 "backtrace from factorial(5)"] then { gdb_suppress_tests }
791 # Now a "next" should position us at the recursive call, which
792 # we will be performing with 4.
794 if [gdb_test "next" \
795 ".* factorial .value - 1.;.*" \
796 "next to recursive call"] then { gdb_suppress_tests }
798 # Disable the breakpoint at the entry to factorial by deleting them all.
799 # The "next" should run until we return to the next line from this
800 # recursive call to factorial with 4.
801 # Buggy versions of gdb will stop instead at the innermost frame on
802 # the line where we are trying to "next" to.
806 if [istarget "mips*tx39-*"] {
809 # We used to set timeout here for all other targets as well. This
810 # is almost certainly wrong. The proper timeout depends on the
811 # target system in use, and how we communicate with it, so there
812 # is no single value appropriate for all targets. The timeout
813 # should be established by the Dejagnu config file(s) for the
814 # board, and respected by the test suite.
816 # For example, if I'm running GDB over an SSH tunnel talking to a
817 # portmaster in California talking to an ancient 68k board running
818 # a crummy ROM monitor (a situation I can only wish were
819 # hypothetical), then I need a large timeout. But that's not the
820 # kind of knowledge that belongs in this file.
822 gdb_test next "\[0-9\]*\[\t \]+return \\(value\\);.*" \
823 "next over recursive call"
825 # OK, we should be back in the same stack frame we started from.
826 # Do a backtrace just to confirm.
828 set result [gdb_test "backtrace" \
829 "#0\[ \t\]+ factorial .value=120.*\r\n#1\[ \t\]+ \[0-9a-fx\]+ in factorial .value=6..*" \
830 "backtrace from factorial(5.1)"]
831 if { $result != 0 } { gdb_suppress_tests }
833 if [target_info exists gdb,noresults] { gdb_suppress_tests }
834 gdb_continue_to_end "recursive next test"
835 gdb_stop_suppressing_tests;
838 test_next_with_recursion
843 # build a new file with optimization enabled so that we can try breakpoints
844 # on targets with optimized prologues
846 if { [prepare_for_testing break.exp "breako2" {break.c break1.c} {debug nowarnings optimize=-O2}] } {
851 # test break at function
853 gdb_test "break main" \
854 "Breakpoint.*at.* file .*, line.*" \
855 "breakpoint function, optimized file"
858 # test break at function
860 gdb_test "break marker4" \
861 "Breakpoint.*at.* file .*$srcfile1, line.*" \
862 "breakpoint small function, optimized file"
865 # run until the breakpoint at main is hit. For non-stubs-using targets.
869 -re "Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$srcfile:$bp_location6.*$bp_location6\[\t \]+if .argc.* \{.*$gdb_prompt $" {
870 pass "run until function breakpoint, optimized file"
872 -re "Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$gdb_prompt $" {
873 pass "run until function breakpoint, optimized file (code motion)"
875 -re "$gdb_prompt $" {
876 fail "run until function breakpoint, optimized file"
879 fail "run until function breakpoint, optimized file (timeout)"
884 # run until the breakpoint at a small function
888 # Add a second pass pattern. The behavior differs here between stabs
889 # and dwarf for one-line functions. Stabs preserves two line symbols
890 # (one before the prologue and one after) with the same line number,
891 # but dwarf regards these as duplicates and discards one of them.
892 # Therefore the address after the prologue (where the breakpoint is)
893 # has no exactly matching line symbol, and GDB reports the breakpoint
894 # as if it were in the middle of a line rather than at the beginning.
896 set bp_location13 [gdb_get_line_number "set breakpoint 13 here" $srcfile1]
897 set bp_location14 [gdb_get_line_number "set breakpoint 14 here" $srcfile1]
899 gdb_test_multiple "continue" \
900 "run until breakpoint set at small function, optimized file" {
901 -re "Breakpoint $decimal, marker4 \\(d=(d@entry=)?177601976\\) at .*$srcfile1:$bp_location13\[\r\n\]+$bp_location13\[\t \]+void marker4.*" {
902 pass "run until breakpoint set at small function, optimized file"
904 -re "Breakpoint $decimal, $hex in marker4 \\(d=(d@entry=)?177601976\\) at .*$srcfile1:$bp_location13\[\r\n\]+$bp_location13\[\t \]+void marker4.*" {
905 pass "run until breakpoint set at small function, optimized file"
907 -re "Breakpoint $decimal, marker4 \\(d=(d@entry=)?177601976\\) at .*$srcfile1:$bp_location14\[\r\n\]+$bp_location14\[\t \]+void marker4.*" {
908 # marker4() is defined at line 46 when compiled with -DPROTOTYPES
909 pass "run until breakpoint set at small function, optimized file (line bp_location14)"
911 -re "Breakpoint $decimal, factorial \\(.*\\) .*\{\r\n$gdb_prompt" {
912 # GCC 4.3 emits bad line number information - see gcc/36748.
913 if { [test_compiler_info "gcc-4-3-*"] } {
916 fail "run until breakpoint set at small function, optimized file"
920 clean_restart breako2
923 # test that 'rbreak' on a symbol that may be from a shared library doesn't
924 # cause a "Junk at end of arguments." error.
926 # On x86 GNU/Linux, this test will choke on e.g. __libc_start_main@plt.
928 # Note that this test won't necessarily choke on all targets even if
929 # all the rbreak issue is present. rbreak needs to match and set a
930 # breakpoint on a symbol causes 'break' to choke.
933 gdb_test_no_output "set breakpoint pending on" "rbreak junk pending setup"
935 # We expect at least one breakpoint to be set when we "rbreak main".
936 gdb_test "rbreak main" \
937 ".*Breakpoint.*at.* file .*$srcfile, line.*" \
938 "rbreak junk set breakpoint"
940 # Run to a breakpoint. Fail if we see "Junk at end of arguments".
943 -re "Junk at end of arguments" {
946 -re ".*Breakpoint \[0-9\]+,.*$gdb_prompt $" {
950 fail "rbreak junk (timeout)"
955 # Reset the default arguments for VxWorks
956 if [istarget "*-*-vxworks*"] {
958 verbose "Timeout is now $timeout seconds" 2
959 gdb_test_no_output "set args main"