gas/testsuite/gas/mips/mips.exp

   1 #
   2 # Some generic MIPS tests
   3 #
   4
   5 # When adding a new test to this file, try to do the following things:
   6 #
   7 # * If testing assembly and disassembly of code, don't forget to test
   8 # the actual bit encodings of the instructions (using the
   9 # --show-raw-insn flag to objdump).
  10 #
  11 # * Try to run the test for as many architectures as appropriate,
  12 # using the "run_dump_test_arches" or "run_list_test_arches" functions,
  13 # along with the output from a call to "mips_arch_list_matching."
  14 #
  15 # * Be sure to compare the test output before and after your testsuite
  16 # changes, to verify that existing and new tests were run as expected.
  17 # Look for expect ERROR messages in the testsuite .log file to make sure
  18 # the new expect code did not contain errors.
  19
  20 # To add support for a new CPU to this file, add an appropriate entry
  21 # to the sequence of "mips_arch_create" function calls below, and test
  22 # the result.  The new CPU should automatically be used when running
  23 # various tests.  If the new CPU is the default CPU for any tool
  24 # targets, make sure the call to "mips_arch_create" reflects that fact.
  25
  26
  27 # "LOSE" marks information about tests which fail at a particular point
  28 # in time, but which are not XFAILed.  Either they used to pass
  29 # and indicate either regressions or the need to tweak the tests to keep
  30 # up the with code, or they are new tests and it is unknown whether or not
  31 # they should pass as-is for the given object formats.
  32
  33
  34 # The functions below create and manipulate an "architecture data
  35 # array" which contains entries for each MIPS architecture (or CPU)
  36 # known to these tests.  The array contains the following information
  37 # for each architecture, indexed by the name of the architecture
  38 # described by the entry:
  39 #
  40 # displayname: The name of the entry to be used for pretty-printing.
  41 #
  42 # gprsize: The size in bits of General Purpose Registers provided by
  43 # the architecture (must be 32 or 64).
  44 #
  45 # props: A list of text strings which are associated with the
  46 # architecture.  These include the architecture name as well as
  47 # information about what instructions the CPU supports.  When matching
  48 # based on properties, an additional property is added to the normal
  49 # property list, "gpr<gprsize>" so that tests can match CPUs which
  50 # have GPRs of a specific size.  The following properties are most
  51 # useful when matching properties for generic (i.e., not CPU-specific)
  52 # tests:
  53 #
  54 #       mips1, mips2, mips3, mips4, mips5, mips32, mips64
  55 #               The architecture includes the instructions defined
  56 #               by that MIPS ISA.
  57 #
  58 #       fpisa3, fpisa4, fpisa5
  59 #               The architecture includes the floating-point
  60 #               instructions defined by that MIPS ISA.
  61 #
  62 #       gpr_ilocks
  63 #               The architecture interlocks GPRs accesses.  (That is,
  64 #               there are no load delay slots.)
  65 #
  66 #       mips3d  The architecture includes the MIPS-3D ASE.
  67 #
  68 #       ror     The architecture includes hardware rotate instructions.
  69 #
  70 #       gpr32, gpr64
  71 #               The architecture provides 32- or 64-bit General Purpose
  72 #               Registers.
  73 #
  74 # as_flags: The assembler flags used when assembling tests for this
  75 # architecture.
  76 #
  77 # objdump_flags: The objdump flags used when disassembling tests for
  78 # this architecture.
  79 #
  80 # Most entries in the architecture array will have values in all of
  81 # the fields above.  One entry, "default" represents the default CPU
  82 # based on the target of the assembler being built.  If always has
  83 # empty "as_flags" and "objdump_flags."
  84
  85 # mips_arch_init
  86 #
  87 # This function initializes the architecture data array ("mips_arches")
  88 # to be empty.
  89 proc mips_arch_init {} {
  90     global mips_arches
  91
  92     # Catch because the variable won't be set the first time through.
  93     catch {unset mips_arches}
  94 }
  95
  96 # mips_arch_create ARCH GPRSIZE EXTENDS PROPS AS_FLAGS OBJDUMP_FLAGS \
  97 #                  (optional:) DEFAULT_FOR_TARGETS
  98 #
  99 # This function creates a new entry in the architecture data array,
 100 # for the architecture or CPU named ARCH, and fills in the entry
 101 # according to the rest of the arguments.
 102 #
 103 # The new entry's property list is initialized to contain ARCH, any
 104 # properties specified by PROPS, and the properties associated with
 105 # the entry specified by EXTENDS.  (The new architecture is considered
 106 # to extend the capabilities provided by that architecture.)
 107 #
 108 # If DEFAULT_FOR_TARGETS is specified, it is a list of targets for which
 109 # this architecture is the default architecture.  If "istarget" returns
 110 # true for any of the targets in the list, a "default" entry will be
 111 # added to the architecture array which indicates that ARCH is the default
 112 # architecture.
 113 proc mips_arch_create {arch gprsize extends props as_flags objdump_flags
 114                        {default_for_targets {}}} {
 115     global mips_arches
 116
 117     if { [info exists mips_arches($arch)] } {
 118              error "mips_arch_create: arch \"$arch\" already exists"
 119     }
 120     if { $gprsize != 32 && $gprsize != 64 } {
 121         error "mips_arch_create: invalid GPR size $gprsize"
 122     }
 123
 124     set archdata(displayname) $arch
 125     set archdata(gprsize) $gprsize
 126     set archdata(as_flags) $as_flags
 127     set archdata(objdump_flags) $objdump_flags
 128     set archdata(props) $arch
 129     eval lappend archdata(props) $props
 130     if { [string length $extends] != 0 } {
 131         eval lappend archdata(props) [mips_arch_properties $extends 0]
 132     }
 133
 134     set mips_arches($arch) [array get archdata]
 135
 136     # Set as default if appropriate.
 137     foreach target $default_for_targets {
 138         if { [istarget $target] } {
 139             if { [info exists mips_arches(default)] } {
 140                 error "mips_arch_create: default arch already exists"
 141             }
 142
 143             set archdata(displayname) "default = $arch"
 144             set archdata(as_flags) ""
 145             set archdata(objdump_flags) ""
 146
 147             set mips_arches(default) [array get archdata]
 148             break
 149         }
 150     }
 151 }
 152
 153 # mips_arch_destroy ARCH
 154 #
 155 # The opposite of the above.  This function removes an entry from
 156 # the architecture data array, for the architecture or CPU named ARCH.
 157
 158 proc mips_arch_destroy {arch} {
 159     global mips_arches
 160
 161     if { [info exists mips_arches($arch)] } {
 162         unset mips_arches($arch)
 163     }
 164 }
 165
 166 # mips_arch_list_all
 167 #
 168 # This function returns the list of all names of entries in the
 169 # architecture data array (including the default entry, if a default
 170 # is known).
 171 proc mips_arch_list_all {} {
 172     global mips_arches
 173     return [lsort -dictionary [array names mips_arches]]
 174 }
 175
 176 # mips_arch_data ARCH
 177 #
 178 # This function returns the information associated with ARCH
 179 # in the architecture data array, in "array get" form.
 180 proc mips_arch_data {arch} {
 181     global mips_arches
 182
 183     if { ! [info exists mips_arches($arch)] } {
 184         error "mips_arch_data: unknown arch \"$arch\""
 185     }
 186     return $mips_arches($arch)
 187 }
 188
 189 # mips_arch_displayname ARCH
 190 #
 191 # This function returns the printable name associated with ARCH in
 192 # the architecture data array.
 193 proc mips_arch_displayname {arch} {
 194     array set archdata [mips_arch_data $arch]
 195     return $archdata(displayname)
 196 }
 197
 198 # mips_arch_properties ARCH (optional:) INCLUDE_GPRSIZE
 199 #
 200 # This function returns the property list associated with ARCH in the
 201 # architecture data array, including the "canonical" target name as the
 202 # first element.
 203 #
 204 # If INCLUDE_GPRSIZE is non-zero, an additional "gpr32" or "gpr64"
 205 # property will be returned as part of the list based on the
 206 # architecture's GPR size.
 207 proc mips_arch_properties {arch {include_gprsize 1}} {
 208     array set archdata [mips_arch_data $arch]
 209     set props $archdata(props)
 210     if { $include_gprsize } {
 211         lappend props gpr$archdata(gprsize)
 212     }
 213     return $props
 214 }
 215
 216 # mips_arch_as_flags ARCH
 217 #
 218 # This function returns the assembler flags associated with ARCH in
 219 # the architecture data array.
 220 proc mips_arch_as_flags {arch} {
 221     array set archdata [mips_arch_data $arch]
 222     return $archdata(as_flags)
 223 }
 224
 225 # mips_arch_objdump_flags ARCH
 226 #
 227 # This function returns the objdump disassembly flags associated with
 228 # ARCH in the architecture data array.
 229 proc mips_arch_objdump_flags {arch} {
 230     array set archdata [mips_arch_data $arch]
 231     return $archdata(objdump_flags)
 232 }
 233
 234 # mips_arch_matches ARCH PROPMATCHLIST
 235 #
 236 # This function returns non-zero if ARCH matches the set of properties
 237 # described by PROPMATCHLIST.  Each entry in PROPMATCHLIST can either
 238 # be the name of a property which must be matched, or "!" followed by
 239 # the name of a property which must not be matched.  ARCH matches
 240 # PROPMATCHLIST if and only if all of the conditions specified by
 241 # PROPMATCHLIST are satisfied.
 242 proc mips_arch_matches {arch propmatchlist} {
 243     foreach pm $propmatchlist {
 244         if { [string match {!*} $pm] } {
 245             # fail if present.
 246             set inverted 1
 247             set p [string range $pm 1 end]
 248         } {
 249             # fail if not present.
 250             set inverted 0
 251             set p $pm
 252         }
 253
 254         set loc [lsearch -exact [mips_arch_properties $arch] $p]
 255
 256         # required-absent and found, or required-present and not found: fail.
 257         if { ($inverted && $loc != -1) || (! $inverted && $loc == -1) } {
 258             return 0
 259         }
 260     }
 261     return 1
 262 }
 263
 264 # mips_arch_list_matching ARGS
 265 #
 266 # This function returns a list of all architectures which match
 267 # the conditions described by its arguments.  Its arguments are
 268 # taken as a list and used as the PROPMATCHLIST in a call to
 269 # "mips_arch_matches" for each known architecture.
 270 proc mips_arch_list_matching {args} {
 271     set l ""
 272     foreach arch [mips_arch_list_all] {
 273         # For now, don't match default arch until we know what its
 274         # properties actually are.
 275         if { [string compare $arch default] == 0
 276              && [string length [mips_arch_properties default]] == 0} {
 277             continue
 278         }
 279         if { [mips_arch_matches $arch $args] } {
 280             lappend l $arch
 281         }
 282     }
 283     return $l
 284 }
 285
 286
 287 # The functions below facilitate running various types of tests.
 288
 289 # run_dump_test_arch NAME OPTS ARCH
 290 #
 291 # Invoke "run_dump_test" for test NAME with additional assembler options OPTS.
 292 # Add the assembler and disassembler flags that are associated with
 293 # architecture ARCH.
 294 #
 295 # You can override the expected output for particular architectures
 296 # and file formats.  The possible test names are, in order of preference:
 297 #
 298 # 1. CARCH@FORMAT@NAME.d
 299 # 2. CARCH@NAME.d
 300 # 3. FORMAT@NAME.d
 301 # 4. NAME.d
 302 #
 303 # where CARCH is the "canonical" name of architecture ARCH as recorded
 304 # in its associated property list, and where FORMAT is the target's
 305 # file format (one of "elf", "ecoff" or "aout").
 306 proc run_dump_test_arch { name opts arch } {
 307     upvar elf elf ecoff ecoff aout aout
 308     global subdir srcdir
 309
 310     set format [expr { $elf ? "elf" : $ecoff ? "ecoff" : "aout" }]
 311     set proparch [lindex [mips_arch_properties $arch 0] 0]
 312     set prefixes [list ${proparch}@${format}@ ${proparch}@ ]
 313     if { [ string match "octeon*" $proparch ] && $proparch != "octeon" } {
 314       lappend prefixes octeon@
 315       lappend prefixes octeon@${format}@
 316     }
 317     lappend prefixes ${format}@
 318     foreach prefix ${prefixes} {
 319         set archname ${prefix}${name}
 320         if { [file exists "$srcdir/$subdir/${archname}.d"] } {
 321             set name $archname
 322             break
 323         }
 324     }
 325
 326     if [catch {run_dump_test $name \
 327                    "{name    {([concat $opts [mips_arch_displayname $arch]])}}
 328                     {objdump {[mips_arch_objdump_flags $arch]}}
 329                     {as      {[concat $opts [mips_arch_as_flags $arch]]}}"} rv] {
 330         perror "$rv"
 331         untested "$subdir/$name ($arch)"
 332     }
 333 }
 334
 335 # run_dump_test_arches NAME [OPTS] ARCH_LIST
 336 #
 337 # Invoke "run_dump_test_arch" for test NAME, for each architecture
 338 # listed in ARCH_LIST.  OPTS, if specified, is a list of additional
 339 # assembler options that should be used for all architectures.
 340 proc run_dump_test_arches { name args } {
 341     upvar elf elf ecoff ecoff aout aout
 342     set opts ""
 343     if { [llength $args] > 1 } {
 344         set opts [lindex $args 0]
 345         set args [lrange $args 1 end]
 346     }
 347     set arch_list [lindex $args 0]
 348     foreach arch $arch_list {
 349         run_dump_test_arch $name $opts $arch
 350     }
 351 }
 352
 353 # run_list_test_arch NAME OPTS ARCH
 354 #
 355 # Invoke "run_list_test" for test NAME with additional assembler options OPTS.
 356 # Add the assembler flags that are associated with architecture ARCH.
 357 proc run_list_test_arch { name opts arch } {
 358     global subdir
 359
 360     set testname "MIPS $name ([concat $opts [mips_arch_displayname $arch]])"
 361     if [catch {run_list_test \
 362                    $name \
 363                    [concat $opts [mips_arch_as_flags $arch]] \
 364                    $testname} rv] {
 365         perror "$rv"
 366         untested "$testname"
 367     }
 368 }
 369
 370 # run_list_test_arches NAME [OPTS] ARCH_LIST
 371 #
 372 # Invoke "run_list_test_arch" for test NAME, for each architecture listed
 373 # in ARCH_LIST.  OPTS, if specified, is a list of additional assembler
 374 # options that should be used for all architectures.
 375 proc run_list_test_arches { name args } {
 376     set opts ""
 377     if { [llength $args] > 1 } {
 378         set opts [lindex $args 0]
 379         set args [lrange $args 1 end]
 380     }
 381     set arch_list [lindex $args 0]
 382     foreach arch $arch_list {
 383         run_list_test_arch "$name" "$opts" "$arch"
 384     }
 385 }
 386
 387
 388 # Create the architecture data array by providing data for all
 389 # known architectures.
 390 #
 391 # Note that several targets pick default CPU based on ABI.  We
 392 # can't easily handle that; do NOT list those targets as defaulting
 393 # to any architecture.
 394 mips_arch_init
 395 mips_arch_create mips1  32      {}      {} \
 396                         { -march=mips1 -mtune=mips1 } { -mmips:3000 }
 397 mips_arch_create mips2  32      mips1   { gpr_ilocks } \
 398                         { -march=mips2 -mtune=mips2 } { -mmips:6000 }
 399 mips_arch_create mips3  64      mips2   { fpisa3 } \
 400                         { -march=mips3 -mtune=mips3 } { -mmips:4000 }
 401 mips_arch_create mips4  64      mips3   { fpisa4 } \
 402                         { -march=mips4 -mtune=mips4 } { -mmips:8000 }
 403 mips_arch_create mips5  64      mips4   { fpisa5 } \
 404                         { -march=mips5 -mtune=mips5 } { -mmips:mips5 }
 405 mips_arch_create mips32 32      mips2   {} \
 406                         { -march=mips32 -mtune=mips32 } { -mmips:isa32 } \
 407                         { mipsisa32-*-* mipsisa32el-*-* }
 408 mips_arch_create mips32r2 32    mips32  { fpisa3 fpisa4 fpisa5 ror } \
 409                         { -march=mips32r2 -mtune=mips32r2 } \
 410                         { -mmips:isa32r2 } \
 411                         { mipsisa32r2-*-* mipsisa32r2el-*-* }
 412 mips_arch_create mips64 64      mips5   { mips32 } \
 413                         { -march=mips64 -mtune=mips64 } { -mmips:isa64 } \
 414                         { mipsisa64-*-* mipsisa64el-*-* }
 415 mips_arch_create mips64r2 64    mips64  { mips32r2 ror } \
 416                         { -march=mips64r2 -mtune=mips64r2 } \
 417                         { -mmips:isa64r2 } \
 418                         { mipsisa64r2-*-* mipsisa64r2el-*-* }
 419 mips_arch_create mips16 32      {}      {} \
 420                         { -march=mips1 -mips16 } { -mmips:16 }
 421 mips_arch_create micromips 64   mips64r2 {} \
 422                         { -march=mips64 -mmicromips } {}
 423 mips_arch_create r3000  32      mips1   {} \
 424                         { -march=r3000 -mtune=r3000 } { -mmips:3000 }
 425 mips_arch_create r3900  32      mips1   { gpr_ilocks } \
 426                         { -march=r3900 -mtune=r3900 } { -mmips:3900 } \
 427                         { mipstx39-*-* mipstx39el-*-* }
 428 mips_arch_create r4000  64      mips3   {} \
 429                         { -march=r4000 -mtune=r4000 } { -mmips:4000 }
 430 mips_arch_create vr5400 64      mips4   { ror } \
 431                         { -march=vr5400 -mtune=vr5400 } { -mmips:5400 }
 432 mips_arch_create sb1    64      mips64  { mips3d } \
 433                         { -march=sb1 -mtune=sb1 } { -mmips:sb1 } \
 434                         { mipsisa64sb1-*-* mipsisa64sb1el-*-* }
 435 mips_arch_create octeon 64      mips64r2 {} \
 436                         { -march=octeon -mtune=octeon } { -mmips:octeon } \
 437                         { mips64octeon*-*-* }
 438 mips_arch_create octeonp 64     octeon {} \
 439                         { -march=octeon+ -mtune=octeon+ } { -mmips:octeon+ } \
 440                         { }
 441 mips_arch_create octeon2 64     octeonp {} \
 442                         { -march=octeon2 -mtune=octeon2 } { -mmips:octeon2 } \
 443                         { }
 444 mips_arch_create xlr    64      mips64  {} \
 445                         { -march=xlr -mtune=xlr } { -mmips:xlr }
 446
 447 #
 448 # And now begin the actual tests!  VxWorks uses RELA rather than REL
 449 # relocations, so most of the generic dump tests will not work there.
 450 #
 451 if { [istarget mips*-*-vxworks*] } {
 452     run_dump_test "vxworks1"
 453     run_dump_test "vxworks1-xgot"
 454     run_dump_test "vxworks1-el"
 455     run_dump_test "vxworks1-xgot-el"
 456 } elseif { [istarget mips*-*-*] } {
 457     set elf [expr [istarget *-*-elf*] || [istarget *-*-irix5*] || [istarget *-*-irix6* ] || [istarget *-*-linux*] || [istarget *-*-netbsd*] ]
 458     set ecoff [expr [istarget *-*-ecoff*] || [istarget *-*-ultrix*] || [istarget *-*-irix\[1-4\]*] ]
 459     set aout [expr [istarget *-*-bsd*] || [istarget *-*-openbsd*] ]
 460     set addr32 [expr [istarget mipstx39*-*-*] || [istarget mips-*-linux*] || [istarget mipsel-*-linux*] || [istarget mips*-*-ecoff]]
 461     set has_newabi [expr [istarget *-*-irix6*] || [istarget mips64*-*-linux*]]
 462     set no_mips16 [expr !$elf]
 463     set no_micromips [expr !$elf]
 464
 465     if { [istarget "mips*-*-*linux*"] || [istarget "mips*-sde-elf*"] } then {
 466         set tmips "t"
 467     } else {
 468         set tmips ""
 469     }
 470     if [istarget mips*el-*-*] {
 471         set el "el"
 472     } {
 473         set el ""
 474     }
 475     if { $no_mips16 } {
 476         mips_arch_destroy mips16
 477     }
 478     if { $no_micromips } {
 479         mips_arch_destroy micromips
 480     }
 481
 482     run_dump_test_arches "abs"          [mips_arch_list_matching mips1]
 483     run_dump_test_arches "add"          [mips_arch_list_matching mips1]
 484     run_dump_test_arches "and"          [mips_arch_list_matching mips1]
 485     run_dump_test_arches "mips1-fp"     [mips_arch_list_matching mips1]
 486     run_list_test_arches "mips1-fp" "-32 -msoft-float" \
 487                                         [mips_arch_list_matching mips1]
 488     run_dump_test "break20"
 489     run_dump_test "trap20"
 490
 491     # LOSE: As of 2002-02-08, "beq" through "bltu" fail for target mips-ecoff.
 492     # See http://sources.redhat.com/ml/binutils/2001-10/msg00418.html for
 493     # more information.  Not sure if the fixes there are correct; should
 494     # branches to external labels be allowed for ECOFF?
 495     run_dump_test_arches "beq"          [mips_arch_list_matching mips1]
 496     run_dump_test_arches "bge"          [mips_arch_list_matching mips1]
 497     run_dump_test_arches "bgeu"         [mips_arch_list_matching mips1]
 498     run_dump_test_arches "blt"          [mips_arch_list_matching mips1]
 499     run_dump_test_arches "bltu"         [mips_arch_list_matching mips1]
 500     run_dump_test_arches "branch-likely" [mips_arch_list_matching mips2]
 501     run_dump_test_arches "branch-misc-1" [mips_arch_list_matching mips1]
 502     run_dump_test_arches "branch-misc-2" [mips_arch_list_matching mips1]
 503     run_dump_test_arches "branch-misc-2pic" [mips_arch_list_matching mips1]
 504     run_dump_test_arches "branch-misc-2-64" [mips_arch_list_matching mips3]
 505     run_dump_test_arches "branch-misc-2pic-64" [mips_arch_list_matching mips3]
 506     run_dump_test "branch-misc-3"
 507     run_dump_test "branch-swap"
 508     run_dump_test "div"
 509
 510     if { !$addr32 } {
 511         run_dump_test_arches "dli"              [mips_arch_list_matching mips3]
 512     }
 513     if $elf {
 514         run_dump_test_arches "elf-jal"  [mips_arch_list_matching mips1]
 515     } else {
 516         run_dump_test "jal"
 517     }
 518     run_dump_test_arches "jal-mask-11"  [mips_arch_list_matching mips1]
 519     run_dump_test_arches "jal-mask-12"  [mips_arch_list_matching mips1]
 520     run_dump_test_arches "jal-mask-21"  [mips_arch_list_matching micromips]
 521     run_dump_test_arches "jal-mask-22"  [mips_arch_list_matching micromips]
 522     run_dump_test "eret-1"
 523     run_dump_test "eret-2"
 524     run_dump_test "eret-3"
 525     run_dump_test_arches "24k-branch-delay-1" \
 526                                         [mips_arch_list_matching mips1]
 527     run_dump_test_arches "24k-triple-stores-1" \
 528                                 [mips_arch_list_matching fpisa5 !octeon]
 529     run_dump_test_arches "24k-triple-stores-2" \
 530                                         [mips_arch_list_matching mips2]
 531     run_dump_test_arches "24k-triple-stores-3" \
 532                                         [mips_arch_list_matching mips2]
 533     run_dump_test_arches "24k-triple-stores-4" \
 534                                         [mips_arch_list_matching mips2]
 535     run_dump_test_arches "24k-triple-stores-5" \
 536                                         [mips_arch_list_matching mips1]
 537     run_dump_test_arches "24k-triple-stores-6" \
 538                                         [mips_arch_list_matching mips2]
 539     run_dump_test_arches "24k-triple-stores-7" \
 540                                         [mips_arch_list_matching mips2]
 541     run_dump_test_arches "24k-triple-stores-8" \
 542                                         [mips_arch_list_matching mips1]
 543     run_dump_test_arches "24k-triple-stores-9" \
 544                                         [mips_arch_list_matching mips1]
 545     run_dump_test_arches "24k-triple-stores-10" \
 546                                         [mips_arch_list_matching mips1]
 547     if $elf {
 548         run_dump_test_arches "24k-triple-stores-11" \
 549                                         [mips_arch_list_matching mips1]
 550     }
 551
 552     if $elf {
 553         run_dump_test_arches "jal-svr4pic" \
 554                                         [mips_arch_list_matching mips1]
 555         run_dump_test_arches "jal-svr4pic-noreorder" \
 556                                         [mips_arch_list_matching mips1]
 557     }
 558     if $elf { run_dump_test "jal-xgot" }
 559     run_list_test_arches "jal-range" "-32" [mips_arch_list_matching mips1]
 560     if $has_newabi { run_dump_test "jal-newabi" }
 561     if !$aout { run_dump_test "la" }
 562     if $elf { run_dump_test "la-svr4pic" }
 563     if $elf { run_dump_test "la-xgot" }
 564     if $elf { run_dump_test "lca-svr4pic" }
 565     if $elf { run_dump_test "lca-xgot" }
 566     if !$aout {
 567         # XXX FIXME: Has mips2 and later insns with mips1 disassemblies.
 568         # (Should split and then use appropriate arch lists.)
 569         run_dump_test_arches "lb"       [mips_arch_list_matching mips1 !mips2]
 570     }
 571     if $elf {
 572         run_dump_test_arches "lb-svr4pic" \
 573                                 [mips_arch_list_matching mips1 !gpr_ilocks]
 574         run_dump_test_arches "lb-svr4pic-ilocks" [mips_arch_list_matching gpr_ilocks]
 575     }
 576     if $elf {
 577         # Both versions specify the cpu, so we can run both regardless of
 578         # the interlocking in the configured default cpu.
 579         run_dump_test "lb-xgot"
 580         run_dump_test "lb-xgot-ilocks"
 581     }
 582     if !$aout {
 583         run_dump_test_arches "ld"       [mips_arch_list_matching mips1]
 584         run_dump_test_arches "ld-forward" \
 585                                         [mips_arch_list_matching mips1]
 586         run_dump_test_arches "sd"       [mips_arch_list_matching mips1]
 587         run_dump_test_arches "sd-forward" \
 588                                         [mips_arch_list_matching mips1]
 589         run_dump_test_arches "l_d"      [mips_arch_list_matching mips1]
 590         run_dump_test_arches "l_d-forward" \
 591                                         [mips_arch_list_matching mips1]
 592         run_dump_test_arches "s_d"      [mips_arch_list_matching mips1]
 593         run_dump_test_arches "s_d-forward" \
 594                                         [mips_arch_list_matching mips1]
 595         run_dump_test_arches "ldc1"     [mips_arch_list_matching mips2]
 596         run_dump_test_arches "ldc1-forward" \
 597                                         [mips_arch_list_matching mips2]
 598         run_dump_test_arches "sdc1"     [mips_arch_list_matching mips2]
 599         run_dump_test_arches "sdc1-forward" \
 600                                         [mips_arch_list_matching mips2]
 601         if $has_newabi {
 602             run_dump_test_arches "ld-n32" \
 603                                         [mips_arch_list_matching mips3]
 604             run_dump_test_arches "ld-forward-n32" \
 605                                         [mips_arch_list_matching mips3]
 606             run_dump_test_arches "sd-n32" \
 607                                         [mips_arch_list_matching mips3]
 608             run_dump_test_arches "sd-forward-n32" \
 609                                         [mips_arch_list_matching mips3]
 610             run_dump_test_arches "l_d-n32" \
 611                                         [mips_arch_list_matching mips3]
 612             run_dump_test_arches "l_d-forward-n32" \
 613                                         [mips_arch_list_matching mips3]
 614             run_dump_test_arches "s_d-n32" \
 615                                         [mips_arch_list_matching mips3]
 616             run_dump_test_arches "s_d-forward-n32" \
 617                                         [mips_arch_list_matching mips3]
 618             run_dump_test_arches "ldc1-n32" \
 619                                         [mips_arch_list_matching mips3]
 620             run_dump_test_arches "ldc1-forward-n32" \
 621                                         [mips_arch_list_matching mips3]
 622             run_dump_test_arches "sdc1-n32" \
 623                                         [mips_arch_list_matching mips3]
 624             run_dump_test_arches "sdc1-forward-n32" \
 625                                         [mips_arch_list_matching mips3]
 626             run_dump_test_arches "ld-n64" \
 627                                         [mips_arch_list_matching mips3]
 628             run_dump_test_arches "ld-forward-n64" \
 629                                         [mips_arch_list_matching mips3]
 630             run_dump_test_arches "sd-n64" \
 631                                         [mips_arch_list_matching mips3]
 632             run_dump_test_arches "sd-forward-n64" \
 633                                         [mips_arch_list_matching mips3]
 634             run_dump_test_arches "l_d-n64" \
 635                                         [mips_arch_list_matching mips3]
 636             run_dump_test_arches "l_d-forward-n64" \
 637                                         [mips_arch_list_matching mips3]
 638             run_dump_test_arches "s_d-n64" \
 639                                         [mips_arch_list_matching mips3]
 640             run_dump_test_arches "s_d-forward-n64" \
 641                                         [mips_arch_list_matching mips3]
 642             run_dump_test_arches "ldc1-n64" \
 643                                         [mips_arch_list_matching mips3]
 644             run_dump_test_arches "ldc1-forward-n64" \
 645                                         [mips_arch_list_matching mips3]
 646             run_dump_test_arches "sdc1-n64" \
 647                                         [mips_arch_list_matching mips3]
 648             run_dump_test_arches "sdc1-forward-n64" \
 649                                         [mips_arch_list_matching mips3]
 650         }
 651     }
 652     if $elf { run_dump_test "ld-svr4pic" }
 653     if $elf { run_dump_test "ld-xgot" }
 654     run_dump_test_arches "li"           [mips_arch_list_matching mips1]
 655     if !$aout { run_dump_test "lifloat" }
 656     if $elf { run_dump_test "lif-svr4pic" }
 657     if $elf { run_dump_test "lif-xgot" }
 658     run_dump_test_arches "mips4"        [mips_arch_list_matching mips4]
 659     run_dump_test_arches "mips4-fp" "-32" \
 660                                         [mips_arch_list_matching fpisa4]
 661     run_dump_test_arches "mips4-fp" "-mabi=o64" \
 662                                         [mips_arch_list_matching fpisa4 gpr64]
 663     run_list_test_arches "mips4-fp" "-32 -msoft-float" \
 664                                         [mips_arch_list_matching fpisa4]
 665     run_dump_test_arches "mips4-branch-likely" \
 666                                         [mips_arch_list_matching mips4]
 667     run_list_test_arches "mips4-branch-likely" "-32 -msoft-float" \
 668                                         [mips_arch_list_matching mips4]
 669     run_dump_test_arches "mips5-fp" "-32" \
 670                                         [mips_arch_list_matching fpisa5]
 671     run_dump_test_arches "mips5-fp" "-mabi=o64" \
 672                                         [mips_arch_list_matching fpisa5 gpr64]
 673     run_dump_test "mul"
 674
 675     run_dump_test_arches "rol"          [mips_arch_list_matching mips1 !ror]
 676     run_dump_test_arches "rol-hw"       [mips_arch_list_matching ror]
 677
 678     run_dump_test_arches "rol64"        [mips_arch_list_matching gpr64 !ror]
 679     run_dump_test_arches "rol64-hw"     [mips_arch_list_matching gpr64 ror]
 680
 681     if !$aout { run_dump_test "sb" }
 682     run_dump_test "trunc"
 683     if !$aout { run_dump_test "ulh" }
 684     run_dump_test_arches "ulh2-eb"      [mips_arch_list_matching mips1]
 685     run_dump_test_arches "ulh2-el"      [mips_arch_list_matching mips1]
 686     if $elf { run_dump_test "ulh-svr4pic" }
 687     if $elf { run_dump_test "ulh-xgot" }
 688     if !$aout {
 689         run_dump_test "ulw"
 690         run_dump_test "uld"
 691         run_dump_test "ush"
 692         run_dump_test "usw"
 693         run_dump_test "usd"
 694     }
 695     run_dump_test_arches "ulw2-eb" \
 696                                 [mips_arch_list_matching mips1 !gpr_ilocks]
 697     run_dump_test_arches "ulw2-eb-ilocks" [mips_arch_list_matching gpr_ilocks]
 698     run_dump_test_arches "ulw2-el" \
 699                                 [mips_arch_list_matching mips1 !gpr_ilocks]
 700     run_dump_test_arches "ulw2-el-ilocks" [mips_arch_list_matching gpr_ilocks]
 701
 702     run_dump_test_arches "uld2-eb" [mips_arch_list_matching mips3]
 703     run_dump_test_arches "uld2-el" [mips_arch_list_matching mips3]
 704
 705     # The mips16 test can only be run on ELF, because only ELF
 706     # supports the necessary mips16 reloc.
 707     if { $elf && !$no_mips16 } {
 708         run_dump_test "mips16"
 709         run_dump_test "mips16-64"
 710         # Check MIPS16e extensions
 711         run_dump_test_arches "mips16e" \
 712                                 [mips_arch_list_matching mips32 !micromips]
 713         # Check jalx handling
 714         run_dump_test "mips16-jalx"
 715         run_dump_test "mips-jalx"
 716         run_dump_test "mips-jalx-2"
 717         # Check MIPS16 HI16/LO16 relocations
 718         run_dump_test "mips16-hilo"
 719         if $has_newabi {
 720             run_dump_test "mips16-hilo-n32"
 721         }
 722         run_dump_test "mips16-hilo-match"
 723     }
 724     run_dump_test "delay"
 725     run_dump_test "nodelay"
 726     run_dump_test "mips4010"
 727     run_dump_test "mips4650"
 728     run_dump_test "mips4100"
 729     run_dump_test "vr4111"
 730     run_dump_test "vr4120"
 731     run_dump_test "vr4120-2"
 732     run_dump_test "vr4130"
 733     run_dump_test "vr5400"
 734     run_dump_test "vr5500"
 735     run_dump_test "rm7000"
 736     run_dump_test "perfcount"
 737     run_dump_test "lineno"
 738     run_dump_test "sync"
 739
 740     run_dump_test_arches "mips32"       [mips_arch_list_matching mips32]
 741     run_dump_test_arches "mips32-imm"   [mips_arch_list_matching mips32]
 742
 743     run_dump_test_arches "mips32-sf32"  [mips_arch_list_matching mips32]
 744     run_list_test_arches "mips32-sf32" "-32 -msoft-float" \
 745                                         [mips_arch_list_matching mips32]
 746     run_dump_test_arches "mips32-cp2"   [mips_arch_list_matching mips32 \
 747                                             !octeon]
 748
 749     run_dump_test_arches "mips32r2"     [mips_arch_list_matching mips32r2]
 750     run_dump_test_arches "mips32r2-cp2" [mips_arch_list_matching mips32r2 \
 751                                             !octeon]
 752     run_dump_test_arches "mips32r2-fp32" \
 753                                         [mips_arch_list_matching mips32r2]
 754     run_list_test_arches "mips32r2-fp32" "-32 -msoft-float" \
 755                                         [mips_arch_list_matching mips32r2]
 756     run_list_test_arches "mips32r2-ill" "-32" \
 757                         [mips_arch_list_matching mips32r2 gpr32]
 758     run_list_test_arches "mips32r2-ill-fp64" "-mabi=o64" \
 759                         [mips_arch_list_matching mips32r2 gpr64]
 760     run_list_test_arches "mips32r2-ill-nofp" "-32 -msoft-float" \
 761                         [mips_arch_list_matching mips32r2]
 762
 763     run_dump_test_arches "mips64"       [mips_arch_list_matching mips64]
 764     run_dump_test_arches "mips64-cp2"   [mips_arch_list_matching mips64 \
 765                                             !octeon]
 766
 767     run_dump_test_arches "mips64r2"     [mips_arch_list_matching mips64r2]
 768     run_list_test_arches "mips64r2-ill" [mips_arch_list_matching mips64r2]
 769
 770     run_dump_test "set-arch"
 771
 772     if { !$addr32 } {
 773         run_dump_test "mips64-mips3d"
 774         run_dump_test_arches "mips64-mips3d-incl" [mips_arch_list_matching mips3d]
 775
 776         run_dump_test "mips64-mdmx"
 777         run_dump_test "sb1-ext-mdmx"
 778         run_dump_test "sb1-ext-ps"
 779         run_dump_test "xlr-ext"
 780     }
 781
 782     run_dump_test_arches "relax"        [mips_arch_list_matching mips2]
 783     run_dump_test_arches "relax-at"     [mips_arch_list_matching mips2]
 784     run_dump_test "relax-swap1-mips1"
 785     run_dump_test "relax-swap1-mips2"
 786     run_dump_test "relax-swap2"
 787     run_dump_test_arches "relax-swap3"  [mips_arch_list_all]
 788     run_list_test_arches "relax-bposge" "-mdsp -relax-branch" \
 789                                         [mips_arch_list_matching mips64r2 \
 790                                             !micromips]
 791
 792     run_list_test "illegal" "-32"
 793     run_list_test "baddata1" "-32"
 794     run_list_test "jalr" ""
 795
 796     # LOSE: As of 2002-02-08, the next 4 tests fail for target mips-ecoff.
 797     # It's unknown whether they _should_ pass as-is, or whether different
 798     # variants are needed for ELF and ECOFF.
 799     run_dump_test "mips-gp32-fp32"
 800     run_dump_test "mips-gp32-fp64"
 801     run_dump_test "mips-gp64-fp32"
 802     run_dump_test "mips-gp64-fp64"
 803
 804     if $elf {
 805         # Make sure that -mcpu=FOO and -mFOO are equivalent.  Assemble a file
 806         # containing 4650-specific instructions with -m4650 and -mcpu=4650,
 807         # and verify that they're the same.  Specifically, we're checking
 808         # that the EF_MIPS_MACH field is set, and that the 4650 'mul'
 809         # instruction does get used.  In previous versions of GAS,
 810         # only -mcpu=4650 would set the EF_MIPS_MACH field; -m4650 wouldn't.
 811         run_dump_test "elf_e_flags1"
 812         run_dump_test "elf_e_flags2"
 813         run_dump_test "elf_e_flags3"
 814         run_dump_test "elf_e_flags4"
 815
 816         # Check EF_MIPS_ARCH markings for each supported architecture.
 817         run_dump_test "elf_arch_mips1"
 818         run_dump_test "elf_arch_mips2"
 819         run_dump_test "elf_arch_mips3"
 820         run_dump_test "elf_arch_mips4"
 821         run_dump_test "elf_arch_mips5"
 822         run_dump_test "elf_arch_mips32"
 823         run_dump_test "elf_arch_mips32r2"
 824         run_dump_test "elf_arch_mips64"
 825         run_dump_test "elf_arch_mips64r2"
 826
 827         # Verify that ASE markings are handled properly.
 828         if { !$no_mips16 } {
 829             run_dump_test "elf_ase_mips16"
 830             run_dump_test "elf_ase_mips16-2"
 831         }
 832         if { !$no_micromips } {
 833             run_dump_test "elf_ase_micromips"
 834             run_dump_test "elf_ase_micromips-2"
 835         }
 836
 837         run_dump_test "mips-gp32-fp32-pic"
 838         run_dump_test "mips-gp32-fp64-pic"
 839         run_dump_test "mips-gp64-fp32-pic"
 840         run_dump_test "mips-gp64-fp64-pic"
 841
 842         run_dump_test "mips-abi32"
 843         run_dump_test "mips-abi32-pic"
 844         run_dump_test "mips-abi32-pic2"
 845
 846         run_dump_test "elf${el}-rel"
 847         run_dump_test_arches "elf${el}-rel2" [mips_arch_list_matching gpr64]
 848         run_dump_test "e32${el}-rel2"
 849         run_dump_test "elf${el}-rel3"
 850         run_dump_test_arches "elf-rel4" [mips_arch_list_matching gpr64]
 851         run_dump_test "e32-rel4"
 852         run_dump_test "elf-rel5"
 853         run_dump_test "elf-rel6"
 854         if $has_newabi {
 855             run_dump_test "elf-rel6-n32"
 856             run_dump_test "elf-rel6-n64"
 857         }
 858         run_dump_test "elf-rel7"
 859         run_dump_test "elf-rel8"
 860         run_dump_test "elf-rel8-mips16"
 861         run_dump_test "elf-rel9"
 862         run_dump_test "elf-rel9-mips16"
 863         if $has_newabi {
 864             run_dump_test "elf-rel10"
 865             run_dump_test "elf-rel11"
 866         }
 867         run_dump_test "elf-rel12"
 868         run_dump_test "elf-rel13"
 869         run_dump_test "elf-rel13-mips16"
 870         run_dump_test "elf-rel14"
 871
 872         if $has_newabi {
 873             run_dump_test "elf-rel15"
 874             run_dump_test "elf-rel16"
 875
 876             run_dump_test "elf-rel-got-n32"
 877             run_dump_test "elf-rel-xgot-n32"
 878             run_dump_test "elf-rel-got-n64"
 879             run_dump_test "elf-rel-xgot-n64"
 880         }
 881         run_dump_test "elf-rel17"
 882         if $has_newabi {
 883             run_dump_test "elf-rel18"
 884         }
 885         run_dump_test "elf-rel19"
 886         run_dump_test "elf-rel20"
 887         if $has_newabi {
 888             run_dump_test "elf-rel21"
 889             run_dump_test "elf-rel22"
 890             run_dump_test "elf-rel23"
 891             run_dump_test "elf-rel23a"
 892             run_dump_test "elf-rel23b"
 893             run_dump_test "elf-rel24"
 894         }
 895
 896         run_dump_test "elf-rel25"
 897         run_dump_test "elf-rel25a"
 898         run_dump_test "elf-rel26"
 899
 900         run_dump_test_arches "elf-rel27" [mips_arch_list_all]
 901
 902         if $has_newabi {
 903             run_dump_test "elf-rel28-n32"
 904             run_dump_test "elf-rel28-n64"
 905         }
 906
 907         if { !$no_mips16 } {
 908             run_dump_test "${tmips}mips${el}16-e"
 909             run_dump_test "${tmips}mips${el}16-f"
 910         }
 911         run_dump_test "elf-consthilo"
 912         run_dump_test "expr1"
 913
 914         run_list_test "tls-ill" "-32"
 915         run_dump_test "tls-o32"
 916         run_dump_test "tls-relw"
 917         run_dump_test "jalr2"
 918
 919         run_dump_test_arches "aent"     [mips_arch_list_matching mips1]
 920
 921         run_dump_test_arches "branch-misc-4" \
 922                                         [mips_arch_list_matching mips1]
 923         run_dump_test_arches "branch-misc-4-64" \
 924                                         [mips_arch_list_matching mips3]
 925
 926         run_dump_test_arches "loc-swap" [mips_arch_list_all]
 927         run_dump_test_arches "loc-swap-dis" \
 928                                         [mips_arch_list_all]
 929         run_dump_test_arches "loc-swap-2" [mips_arch_list_all]
 930     }
 931
 932     if $has_newabi {
 933         run_dump_test "n32-consec"
 934     }
 935
 936     # tests of objdump's ability to disassemble using different
 937     # register names.
 938     run_dump_test "gpr-names-numeric"
 939     run_dump_test "gpr-names-32"
 940     run_dump_test "gpr-names-n32"
 941     run_dump_test "gpr-names-64"
 942
 943     run_dump_test "fpr-names-numeric"
 944     run_dump_test "fpr-names-32"
 945     run_dump_test "fpr-names-n32"
 946     run_dump_test "fpr-names-64"
 947
 948     run_dump_test "cp0-names-numeric"
 949     run_dump_test "cp0-names-r3000"
 950     run_dump_test "cp0-names-r4000" \
 951                   { { {name} {(r4000)} } { {objdump} {-M cp0-names=r4000} } }
 952     run_dump_test "cp0-names-r4000" \
 953                   { { {name} {(r4400)} } { {objdump} {-M cp0-names=r4400} } }
 954     run_dump_test "cp0-names-mips32"
 955     run_dump_test "cp0-names-mips32r2"
 956     run_dump_test "cp0-names-mips64"
 957     run_dump_test "cp0-names-mips64r2"
 958     run_dump_test "cp0-names-sb1"
 959
 960     run_dump_test "cp0sel-names-numeric"
 961     run_dump_test "cp0sel-names-mips32"
 962     run_dump_test "cp0sel-names-mips32r2"
 963     run_dump_test "cp0sel-names-mips64"
 964     run_dump_test "cp0sel-names-mips64r2"
 965     run_dump_test "cp0sel-names-sb1"
 966
 967     run_dump_test "hwr-names-numeric"
 968     run_dump_test "hwr-names-mips32r2"
 969     run_dump_test "hwr-names-mips64r2"
 970
 971     run_dump_test "ldstla-32"
 972     run_dump_test "ldstla-32-mips3"
 973     run_dump_test "ldstla-32-shared"
 974     run_dump_test "ldstla-32-mips3-shared"
 975     run_list_test "ldstla-32-1" "-mabi=32" \
 976         "MIPS ld-st-la bad constants (ABI o32)"
 977     run_list_test "ldstla-32-mips3-1" "-mabi=32" \
 978         "MIPS ld-st-la bad constants (ABI o32, mips3)"
 979     run_list_test "ldstla-32-1" "-KPIC -mabi=32" \
 980         "MIPS ld-st-la bad constants (ABI o32, shared)"
 981     run_list_test "ldstla-32-mips3-1" "-KPIC -mabi=32" \
 982         "MIPS ld-st-la bad constants (ABI o32, mips3, shared)"
 983     run_dump_test "ldstla-eabi64"
 984     if $has_newabi {
 985         run_dump_test "ldstla-n64"
 986         run_dump_test "ldstla-n64-shared"
 987         run_dump_test "ldstla-n64-sym32"
 988     }
 989
 990     run_dump_test "macro-warn-1"
 991     run_dump_test "macro-warn-2"
 992     run_dump_test "macro-warn-3"
 993     run_dump_test "macro-warn-4"
 994     if $has_newabi {
 995         run_dump_test "macro-warn-1-n32"
 996         run_dump_test "macro-warn-2-n32"
 997     }
 998
 999     run_dump_test "noat-1"
1000     run_list_test "noat-2" ""
1001     run_list_test "noat-3" ""
1002     run_list_test "noat-4" ""
1003     run_list_test "noat-5" ""
1004     run_list_test "noat-6" ""
1005     run_list_test "noat-7" ""
1006
1007     run_dump_test "at-1"
1008     run_list_test "at-2" "-32 -mips1" "MIPS at-2"
1009
1010     run_dump_test "loongson-2e"
1011     run_dump_test "loongson-2f"
1012     run_dump_test "loongson-2f-2"
1013     run_dump_test "loongson-2f-3"
1014
1015     run_dump_test "loongson-3a"
1016     run_dump_test "loongson-3a-2"
1017     run_dump_test "loongson-3a-3"
1018
1019     run_dump_test_arches "octeon"       [mips_arch_list_matching octeon]
1020     run_dump_test_arches "octeon-saa-saad" [mips_arch_list_matching octeonp]
1021     run_list_test_arches "octeon-ill"   [mips_arch_list_matching octeon]
1022     run_dump_test_arches "octeon-pref"  [mips_arch_list_matching octeon]
1023     run_dump_test_arches "octeon2"      [mips_arch_list_matching octeon2]
1024
1025     run_dump_test "smartmips"
1026     run_dump_test "mips32-dsp"
1027     run_dump_test "mips32-dspr2"
1028     run_dump_test "mips64-dsp"
1029     run_dump_test "mips32-mt"
1030
1031     if { $elf && !$no_mips16 } {
1032         run_dump_test "mips16-dwarf2"
1033         if $has_newabi {
1034             run_dump_test "mips16-dwarf2-n32"
1035         }
1036     }
1037     if { !$no_mips16 } {
1038         run_dump_test "mips16e-jrc"
1039         run_dump_test "mips16e-save"
1040         run_dump_test "mips16e-64"
1041         run_list_test "mips16e-64" "-march=mips32 -32"
1042         run_dump_test "mips16-intermix"
1043     }
1044     run_dump_test "vxworks1"
1045     run_dump_test "vxworks1-xgot"
1046     run_dump_test "vxworks1-el"
1047     run_dump_test "vxworks1-xgot-el"
1048
1049     run_dump_test "noreorder"
1050     run_dump_test "align"
1051     run_dump_test "align2"
1052     run_dump_test "align2-el"
1053     run_dump_test "align3"
1054     run_dump_test "odd-float"
1055
1056     run_list_test_arches "mips-macro-ill-sfp" "-32 -msingle-float" \
1057                                         [mips_arch_list_matching mips2]
1058     run_list_test_arches "mips-macro-ill-nofp" "-32 -msoft-float" \
1059                                         [mips_arch_list_matching mips2]
1060
1061     run_list_test_arches "mips-hard-float-flag" \
1062         "-32 -msoft-float -mhard-float" \
1063                                         [mips_arch_list_matching mips1]
1064     run_list_test_arches "mips-double-float-flag" \
1065         "-32 -msingle-float -mdouble-float" \
1066                                         [mips_arch_list_matching mips1]
1067
1068     run_dump_test "mips16-vis-1"
1069     run_dump_test "call-nonpic-1"
1070     run_dump_test "mips32-sync"
1071     run_dump_test_arches "mips32r2-sync" \
1072                                         [mips_arch_list_matching mips32r2]
1073     run_dump_test_arches "alnv_ps-swap" [mips_arch_list_matching fpisa5]
1074     run_dump_test_arches "cache" [lsort -dictionary -unique [concat \
1075                                         [mips_arch_list_matching mips3] \
1076                                         [mips_arch_list_matching mips32] ] ]
1077     run_dump_test_arches "daddi"        [mips_arch_list_matching mips3]
1078     run_dump_test_arches "pref" [lsort -dictionary -unique [concat \
1079                                         [mips_arch_list_matching mips4] \
1080                                         [mips_arch_list_matching mips32] ] ]
1081
1082     if $has_newabi { run_dump_test "cfi-n64-1" }
1083
1084     run_dump_test "pr12915"
1085     run_dump_test "reginfo-1a"
1086     run_dump_test "reginfo-1b"
1087
1088     if { !$no_micromips } {
1089         run_dump_test "micromips"
1090         run_dump_test "micromips-trap"
1091         run_list_test "micromips-size-0" \
1092             "-32 -march=mips64 -mmicromips" "microMIPS instruction size 0"
1093         run_dump_test "micromips-size-1"
1094         run_dump_test "micromips-branch-relax"
1095         run_dump_test "micromips-branch-relax-pic"
1096         run_dump_test "micromips-branch-delay"
1097     }
1098
1099     run_dump_test_arches "mcu"          [mips_arch_list_matching mips32r2 \
1100                                             !octeon]
1101 }