Brendan Le Foll [Mon, 24 Nov 2014 10:50:32 +0000 (10:50 +0000)]
docs: add minnowboard max to doxygen index page
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Mon, 24 Nov 2014 08:04:08 +0000 (08:04 +0000)]
i2c.h: fix typo in doxygen comment
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Henry Bruce [Fri, 21 Nov 2014 01:15:44 +0000 (17:15 -0800)]
gpio.c: Added gpio list/set/get utility
Signed-off-by: Henry Bruce <henry.bruce@intel.com>
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Henry Bruce [Fri, 21 Nov 2014 01:14:48 +0000 (17:14 -0800)]
docs: Added first cut at minnow-max documentation
Signed-off-by: Henry Bruce <henry.bruce@intel.com>
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Henry Bruce [Fri, 21 Nov 2014 01:13:58 +0000 (17:13 -0800)]
intel_minnow_max.c: fixed pin capability errors
Signed-off-by: Henry Bruce <henry.bruce@intel.com>
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Brendan Le Foll [Fri, 21 Nov 2014 11:58:08 +0000 (11:58 +0000)]
docs: explain aio numbering scheme
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Thomas Ingleby [Fri, 21 Nov 2014 02:05:43 +0000 (02:05 +0000)]
spi: fix mistake from mem branch where spi will fail.
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Brendan Le Foll [Thu, 20 Nov 2014 15:00:55 +0000 (15:00 +0000)]
mraa.c: fix char count in board_name
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Henry Bruce [Thu, 20 Nov 2014 01:01:35 +0000 (17:01 -0800)]
oe-sdk_cross.cmake: 'make install' now targets oe sysroot
Signed-off-by: Henry Bruce <henry.bruce@intel.com>
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Henry Bruce [Thu, 20 Nov 2014 00:55:48 +0000 (16:55 -0800)]
pwm.c: Must write period before duty_cycle to avoid sysfs error
Signed-off-by: Henry Bruce <henry.bruce@intel.com>
Henry Bruce [Sat, 15 Nov 2014 00:33:38 +0000 (16:33 -0800)]
blink_onboard.c: Added Minnow Max support
Signed-off-by: Henry Bruce <henry.bruce@intel.com>
Henry Bruce [Thu, 13 Nov 2014 22:00:03 +0000 (14:00 -0800)]
hellomraa.c: Extended sample to display detected platform.
Signed-off-by: Henry Bruce <henry.bruce@intel.com>
Henry Bruce [Sat, 15 Nov 2014 00:32:55 +0000 (16:32 -0800)]
gpio.c: check that real gpio did initialise correctly
On platforms without muxing perform a little more checking when the 'real'
linux/sysfs gpio is opened. We don't expect this to fail but on platforms where
the linux gpios can be changed depending on pinctrl/bios configuration this
might not always be the case.
Signed-off-by: Henry Bruce <henry.bruce@intel.com>
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Henry Bruce [Thu, 13 Nov 2014 21:55:58 +0000 (13:55 -0800)]
intel_minnow_max: Added platform definition
Signed-off-by: Henry Bruce <henry.bruce@intel.com>
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Thomas Ingleby [Thu, 20 Nov 2014 14:59:34 +0000 (14:59 +0000)]
galileo gen2: add missing mux information for UART on IO1
Fixes #36
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Brendan Le Foll [Thu, 20 Nov 2014 14:23:29 +0000 (14:23 +0000)]
intel_edison_fab_c.c: remove uart_init_post hook for miniboard
use uart_init_pre hook instead. Fixes #39
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Brendan Le Foll [Thu, 20 Nov 2014 14:10:56 +0000 (14:10 +0000)]
i2c: fix I2c::read() call
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Tue, 18 Nov 2014 16:09:08 +0000 (16:09 +0000)]
i2c: remove smbus helper library & clean up command use in API
This commit changes the mraa_i2c_read() API call behaviour, a register should
now always be set when using this call. The smbus helper library is no longer
required since the code is now all contained from i2c.c which avoids multiple
function calls
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Tue, 18 Nov 2014 15:57:47 +0000 (15:57 +0000)]
spi.hpp: remove transfer command from SWIG APIs
Transfer command works with a uint8_t buffer that is written into, this does
not work in SWIG APIs and will cause a copy in either case, so the API call is
not useful. Remove to stop confusion.
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Tue, 18 Nov 2014 15:56:33 +0000 (15:56 +0000)]
common.hpp: add missing docstring param for setLogLevel
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Mon, 17 Nov 2014 16:23:49 +0000 (16:23 +0000)]
i2c: add clean {write, read}data functions
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Mon, 17 Nov 2014 16:15:11 +0000 (16:15 +0000)]
i2c.hpp: reorder & style header
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Wed, 19 Nov 2014 23:52:13 +0000 (23:52 +0000)]
edison.md: add 1.8V IO warning
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Wed, 19 Nov 2014 23:45:58 +0000 (23:45 +0000)]
spi.c: fix identation
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Wed, 19 Nov 2014 23:45:35 +0000 (23:45 +0000)]
spi.c: check memory allocation for context was succesful
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Wed, 19 Nov 2014 23:44:57 +0000 (23:44 +0000)]
gpio.c: free context if we fail to write to export
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Thomas Ingleby [Mon, 17 Nov 2014 17:37:34 +0000 (17:37 +0000)]
galileo gen 2: port mmap to new structure
Feature parity pre mem branch.
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Mon, 17 Nov 2014 17:26:05 +0000 (17:26 +0000)]
galileo gen 1: port mmap to new structure
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Wed, 12 Nov 2014 16:33:56 +0000 (16:33 +0000)]
edison: add mmap support. read & write
Closes #27
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Fri, 7 Nov 2014 02:02:29 +0000 (02:02 +0000)]
mmap: remove implementation of mmap gpio
Instead of trying to have an implementation that covers most platforms
Leave all mmap up to platform definition. Through function pointers.
gpio_mmap_setup sets up the mmap
Within the internal gpio context struct two more function pointers now
exist mmap_read & mmap_write. They exist there so each context can its
own function for handling a write and read.
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Thu, 6 Nov 2014 18:02:19 +0000 (18:02 +0000)]
internal: remove un-implmented function prototype
Left over from earlier version of mraa.
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Thu, 6 Nov 2014 17:32:31 +0000 (17:32 +0000)]
pwm: move pwm setup to module
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Mon, 3 Nov 2014 16:20:02 +0000 (16:20 +0000)]
spi: move spi setup from core into module
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Mon, 3 Nov 2014 15:44:40 +0000 (15:44 +0000)]
i2c: move i2c setup from core into module
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Mon, 3 Nov 2014 15:16:33 +0000 (15:16 +0000)]
aio: move aio setup from core into module
Added additional syslog messages for debugging
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Thu, 30 Oct 2014 19:08:15 +0000 (19:08 +0000)]
gpio: move gpio setup from core into module
Added syslog lines for easier fault investigation
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Thu, 30 Oct 2014 18:09:27 +0000 (18:09 +0000)]
internal: add function protype for mux setup.
Now accesible from all mraa modules
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Thu, 30 Oct 2014 17:35:35 +0000 (17:35 +0000)]
spi: expose defined CS
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Mon, 17 Nov 2014 16:05:26 +0000 (16:05 +0000)]
edison: fix gpio mapping on j18-8
Closes #37
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Mon, 17 Nov 2014 15:36:31 +0000 (15:36 +0000)]
galileo gen2: add uart definitions
Also added hook for setting output buffers.
fixes #36
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Brendan Le Foll [Wed, 12 Nov 2014 13:48:46 +0000 (13:48 +0000)]
docs: update libmraa intro text
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Mon, 10 Nov 2014 20:48:27 +0000 (20:48 +0000)]
cmake: add cmake toolchain file for oe setup
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Sun, 9 Nov 2014 12:26:09 +0000 (12:26 +0000)]
building.md: update cmake instructions
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Fri, 7 Nov 2014 15:05:23 +0000 (15:05 +0000)]
galileorevh.md: add i2c frequency info
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Thu, 6 Nov 2014 15:25:01 +0000 (15:25 +0000)]
mraa: update to version 0.5.2
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Matthias Hahn [Wed, 5 Nov 2014 19:26:17 +0000 (20:26 +0100)]
pwm: syslog message typo correction
Signed-off-by: Matthias Hahn <matthias.hahn@intel.com>
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Wed, 5 Nov 2014 11:20:36 +0000 (11:20 +0000)]
rgblcd.py: update example to use only writeReg()
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Wed, 5 Nov 2014 11:13:29 +0000 (11:13 +0000)]
rgblcd.js: add i2c example similar to python
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Tue, 4 Nov 2014 19:08:08 +0000 (19:08 +0000)]
i2c_HMC5883L.c: fix type in i2c buffer
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Fri, 31 Oct 2014 15:10:15 +0000 (15:10 +0000)]
i2c: use uint8_t when appropriate and remove char
Object APIs used signed chars for some operations which are not appropriate
when using i2c.
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Bernd Barsuhn [Tue, 4 Nov 2014 10:13:37 +0000 (10:13 +0000)]
gpio: fix identation
Signed-off-by: Bernd Barsuhn <bernd.barsuhn@me.com>
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Bernd Barsuhn [Wed, 29 Oct 2014 12:25:38 +0000 (13:25 +0100)]
gpio: make mraa_gpio_isr_exit block until the interrupt handling thread is terminated.
Signed-off-by: Bernd Barsuhn <bernd.barsuhn@me.com>
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Mon, 3 Nov 2014 15:08:11 +0000 (15:08 +0000)]
Pwm3-cycle.cpp: add pwm::enable() call to example
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Anton Krasovsky [Thu, 30 Oct 2014 23:25:10 +0000 (23:25 +0000)]
i2c: add api call to read byte from a specified register
Signed-off-by: Anton Krasovsky <anton@no-mad.net>
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Thu, 30 Oct 2014 17:35:35 +0000 (17:35 +0000)]
spi: expose defined CS
Add missing information for Gen 2 CS info
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Thu, 30 Oct 2014 12:03:24 +0000 (12:03 +0000)]
pwm: add period limits, warn over syslog
Added minimum, maximum and default period settings to board definitions
PWM will now have a default period as defined in the board defintion.
When using pwm_write() writing 1.0f or above will default to 100%.
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Brendan Le Foll [Wed, 29 Oct 2014 13:14:46 +0000 (13:14 +0000)]
contributing.md: add a few contribution rules matching UPM
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Maximilian von Tschirschnitz [Wed, 29 Oct 2014 12:52:49 +0000 (13:52 +0100)]
pwm: fixed wrong line ending being checked by strtol
Move from fopen to POSIX open introduced this bug in strtol
Signed-off-by: Maximilian von Tschirschnitz <maximilian.tschirschnitz@intel.com>
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Thomas Ingleby [Fri, 24 Oct 2014 13:23:56 +0000 (14:23 +0100)]
README: add Intel DE3815 to supported systems.
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Tue, 21 Oct 2014 23:19:27 +0000 (00:19 +0100)]
de3815: add initial doc
Also removed printf used during inital implementation.
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Tue, 21 Oct 2014 22:59:53 +0000 (23:59 +0100)]
de3815: added PWM support
There are two PWM pins on the custom solutions header.
10-PWM[0] and 11-PWM[1] in mraa.
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Fri, 17 Oct 2014 16:29:20 +0000 (17:29 +0100)]
intel_de3815: initial support for Baytrail NUC
* I2C only currently supported, Both bus 0 and 1
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Brendan Le Foll [Thu, 23 Oct 2014 17:05:36 +0000 (18:05 +0100)]
spi: attempt to fix spi lsb mode
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Thu, 23 Oct 2014 17:05:07 +0000 (18:05 +0100)]
i2c: use default i2c bus in board config if invalid
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Wed, 22 Oct 2014 20:06:45 +0000 (21:06 +0100)]
syslog: unify error msg style
syslog messages should be written as <module>: Message in order to increase
readability and usefulness
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Wed, 22 Oct 2014 19:52:11 +0000 (20:52 +0100)]
spi: fix mraa_spi_bit_per_word call to use correct ioctl
This should fix #14
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Wed, 22 Oct 2014 19:51:13 +0000 (20:51 +0100)]
intel_edison_fab_c.c: If i2c bus number is invalid use the default bus (6)
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Thomas Ingleby [Mon, 20 Oct 2014 18:13:43 +0000 (19:13 +0100)]
edison: fix uart missing information
This should fix #19
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Mon, 20 Oct 2014 17:43:58 +0000 (18:43 +0100)]
uart: add pre uart hook
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Brendan Le Foll [Mon, 20 Oct 2014 09:01:53 +0000 (10:01 +0100)]
i2c: mraa_i2c_frequency now returns correct returns
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Thomas Ingleby [Sun, 19 Oct 2014 15:25:47 +0000 (16:25 +0100)]
edison: add uart definitions
Needed to use a hook to make sure the SoC pins for RX TX are in the
right place.
Also added a line in documentation listed what interface is available.
This resolves #18
Co-Authored-By: Kurt Eckhardt <kurte@rockisland.com>
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Sun, 19 Oct 2014 15:09:19 +0000 (16:09 +0100)]
uart: add init post hook
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Kurt Eckhardt [Sat, 18 Oct 2014 13:54:38 +0000 (06:54 -0700)]
common: c++ link error if multiple files include header
Header only C++ function definitions need to be static to avoid linking issues
when including the header multiple times.
Signed-off-by: Kurt Eckhardt <kurte@rockisland.com>
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Sat, 18 Oct 2014 17:47:44 +0000 (18:47 +0100)]
spi: make mraa_spi_write_buf call mraa_transfer_buf
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Kurt Eckhardt [Sat, 18 Oct 2014 16:25:19 +0000 (09:25 -0700)]
spi: Add SPI transfer function that pass in RX/TX
When using SPI, I prefer to not have to do malloc/free functions for each
transfer, so why not have a transfer function that you can pass in both
buffers. With my ILI9341 TFT display code that gave some perf wins, also more
of a win, you can pass in NULL for recv buffer and the underlying device driver
does not have to copy the data.
Signed-off-by: Kurt Eckhardt <kurte@rockisland.com>
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Thu, 16 Oct 2014 13:53:56 +0000 (14:53 +0100)]
exception: Add exceptions when context creation fails
* Exceptions only fired in constructor when it would initialise with a NULL
context causing segfaults if used any further
* Adds exception.i requirement to mraa.i for node.js and python support
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Thomas Ingleby [Wed, 15 Oct 2014 11:29:08 +0000 (12:29 +0100)]
api: correct mistake in gpio.hpp
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Wed, 15 Oct 2014 10:23:25 +0000 (11:23 +0100)]
mraa: update to version 0.5.1
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Wed, 8 Oct 2014 17:03:40 +0000 (18:03 +0100)]
doc: add Edison miniboard doc
* Brings to conclusions Fix #10
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Wed, 8 Oct 2014 17:02:53 +0000 (18:02 +0100)]
edison: miniboard GPIO mode hook added
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Wed, 8 Oct 2014 16:23:45 +0000 (17:23 +0100)]
edison: miniboard SPI bus support added
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Wed, 8 Oct 2014 16:08:44 +0000 (17:08 +0100)]
edison: miniboard i2c support added for bus 1 & 6
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Wed, 8 Oct 2014 14:24:04 +0000 (15:24 +0100)]
edison: add missing PWM hook for miniboard
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Wed, 8 Oct 2014 13:59:37 +0000 (14:59 +0100)]
pwm: fix incorrect hook check
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Brendan Le Foll [Tue, 7 Oct 2014 19:19:54 +0000 (20:19 +0100)]
Revert "CMakeLists.txt: add DEBUG define when doing a debug build"
This reverts commit
52a48a728a48d4fa3af3697a22b1c565ea80907c which made debug
builds stop working.
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Thomas Ingleby [Tue, 7 Oct 2014 18:20:03 +0000 (19:20 +0100)]
edison: add inital miniboard support
* Only GPIO will work currently
* This fixes #11
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Brendan Le Foll [Fri, 3 Oct 2014 21:50:18 +0000 (22:50 +0100)]
coverity: Fix issues found by coverity scan
* Fix a few resource leaks in error conditions
* Makes strtol() calls safer in pwm module
* Make sure buffer is terminated after read() in aio
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Fri, 3 Oct 2014 21:49:01 +0000 (22:49 +0100)]
index.md: add edison link
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Fri, 3 Oct 2014 18:00:45 +0000 (19:00 +0100)]
docs: add edison to doxygen doc and coverity instructions
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Fri, 3 Oct 2014 11:00:11 +0000 (12:00 +0100)]
gpio: add more error checking for mraa_gpio_context
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Fri, 3 Oct 2014 09:18:13 +0000 (10:18 +0100)]
doc: cleanup internal documentation and naming
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Thu, 25 Sep 2014 13:33:44 +0000 (14:33 +0100)]
index.md: add ADC change for 0.5.0
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Thu, 25 Sep 2014 13:31:04 +0000 (14:31 +0100)]
syslog: remove all fprintf calls and use syslog instead
Syslog is now used for all error messages, return values in the code should be
used by programmers to see the status of the library/board and syslog can be
used to see quickly from a debugging perspective what has gone wrong. A few
cosmetics where improved as well as a mraa_set_log_level() call where the
syslog log mask can be set directly from libmraa.
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Thu, 25 Sep 2014 13:28:08 +0000 (14:28 +0100)]
mraa_internal.h: fix styling issues
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Thu, 25 Sep 2014 13:26:32 +0000 (14:26 +0100)]
CMakeLists.txt: add DEBUG define when doing a debug build
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Wed, 24 Sep 2014 11:06:10 +0000 (12:06 +0100)]
aio.c: cosmetic fix on file
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Brendan Le Foll [Mon, 22 Sep 2014 16:49:32 +0000 (17:49 +0100)]
edison.md: add details on i2c bus number
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Thomas Ingleby [Mon, 22 Sep 2014 16:40:05 +0000 (17:40 +0100)]
aio: change c++ calls to camelCase
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Mon, 22 Sep 2014 14:29:02 +0000 (15:29 +0100)]
aio: change return from uint16 to unsigned int
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
Thomas Ingleby [Mon, 22 Sep 2014 13:52:18 +0000 (14:52 +0100)]
doc: add ADC information for each platform
Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
projects / contrib / mraa.git / log