Signed-off-by: Thomas Ingleby <thomas.c.ingleby@intel.com>
- PWM avaible on default swizzler postions. (3,5,6,9)
- SPI exposed is also used for the ADC. Try not to use your own CS.
+- ADC kernel module will return 12bit number but the ADC itself only has an
+ accuracy of 10bits. This ADC is only included on the arduino board.
- gpio register access via /dev/uio is limited to pin2 and 3
- gpio interupts will only work on GPIO_EDGE_BOTH
+- adc kernel module will return 12bit number. MRAA defaults shift this to 10bits
- i2c bus is shared with multiple devices, scanning it usually fails
- pwm period is set globally for all pwm channels, when changed this will halt
all pwm channels
+- adc kernel module will return 12bit number but the ADC itself only has an
+ accuracy of 10bits.