Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Supported Boards
================
-* [Galileo Rev D](../master/docs/galileorevd.md)
-* [Galileo Rev H](../master/docs/galileorevh.md)
+* [Galileo Gen 1 - Rev D](../master/docs/galileorevd.md)
+* [Galileo Gen 2 - Rev H](../master/docs/galileorevh.md)
Installing on your board
========
``` bash
echo "src mraa-upm http://iotdk.intel.com/repos/1.1/intelgalactic" > /etc/opkg/mraa-upm.conf
opkg update
-opkg install mraa
+opkg install libmraa0
```
Compiling
-Galileo Rev D {#galileorevd}
-=============
+Galileo Gen 1 - Rev D {#galileorevd}
+=====================
Galileo is a microcontroller board based on the IntelĀ® Quark SoC X1000
Application Processor, a 32-bit Intel Pentium-class system on a chip.
-Galileo Rev H {#galileorevh}
-=============
+Galileo Gen 2 - Rev H {#galileorevh}
+=====================
Galileo is a microcontroller board based on the IntelĀ® Quark SoC X1000
Application Processor, a 32-bit Intel Pentium-class system on a chip.
-The rev H board has the following limitations in libmraa:
+The Gen 2 board has the following limitations in libmraa:
- i2c is set at 400Khz speed cannot be changed without reloading kernel module
- i2c bus is shared with multiple devices, scanning it usually fails