src/setting.c

   1 /*
   2  * setting
   3  * Copyright (c) 2012 Samsung Electronics Co., Ltd.
   4  *
   5  * Licensed under the Flora License, Version 1.1 (the License);
   6  * you may not use this file except in compliance with the License.
   7  * You may obtain a copy of the License at
   8  *
   9  *     http://floralicense.org/license/
  10  *
  11  * Unless required by applicable law or agreed to in writing, software
  12  * distributed under the License is distributed on an AS IS BASIS,
  13  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  14  * See the License for the specific language governing permissions and
  15  * limitations under the License.
  16  */
  17 #include <setting.h>
  18 #include <app.h>
  19
  20 #include <appcore-common.h>
  21 #include <Ecore_X.h>
  22 #include <sensor.h>
  23 #include <aul.h>
  24 #include "setting-common-plugin.h"
  25 #include "setting-main.h"
  26 #include <elm_object.h>
  27 #include <appsvc.h>
  28 #include <EWebKit2.h>
  29 #include <nfc.h>
  30 #include <signal.h>
  31
  32 extern void setting_update_gl_item(void* data);
  33
  34 #define KEY_END "XF86Stop"
  35 #define SUPPORT_UG_MESSAGE
  36
  37 int g_geometry_x, g_geometry_y, g_geometry_w, g_geometry_h;
  38
  39 void termination_handler(int signum)
  40 {
  41         SETTING_TRACE_BEGIN;
  42         SETTING_TRACE(">>>>>>>>>>> SIGTERM >>>>>>>>>>>>>>> SETTING");
  43
  44         elm_exit();
  45 }
  46
  47 static void __main_motion_sensor_cb( unsigned long long timestamp, void *data)
  48 {
  49         /* The code 'return ;' will be deleted after the defect of elm_genlist_item_top_show() is fixed */
  50
  51         setting_retm_if(NULL == data, "NULL == data");
  52         setting_main_appdata *ad = (setting_main_appdata *) data;
  53
  54         SETTING_TRACE(">>>>>>>Double tap event detected");
  55         //If it is in UG mode, Setting just send the event to the loaded UG
  56
  57         if (ad->isInUGMode && ad->ug) {
  58         #ifdef SUPPORT_UG_MESSAGE
  59                 SETTING_TRACE(">>>>>>>Send event to UG");
  60
  61                 service_h svc;
  62                 if(service_create(&svc))
  63                         return;
  64
  65                 service_add_extra_data(svc, "Detected", "Double_tap_event");
  66                 if (ug_send_message(ad->ug, svc) != 0) {
  67                         SETTING_TRACE_ERROR("call ug_send_message fail");
  68                 }
  69
  70                 service_destroy(svc);
  71         #else
  72                 //Methord: instead of send message to UG and its sub-UGs,
  73                 //1.To get the layout of UG ,and then
  74                 //2.To get the naviframe of the layout, and then,
  75                 //3.To get the toppest item  of naviframe, and then
  76                 //4.To get the content of naviframe toppest item,that is content
  77                 //5.content ia mainly a genlist,but it is not fixed,it maybe a conformant or another layout
  78                 //  if it is a genlist,directly show its top item
  79                 //  if it is a conformant or another layout,to get all of its sub-objects,then ask turnly
  80                 //     whether it is a genlist,if it is(some sub-object), topply show it.
  81                 //That's all
  82                 Evas_Object *layout = (Evas_Object *)ug_get_layout(ad->ug);
  83                 if (layout) {
  84                         Evas_Object *genlist = NULL;
  85                         Evas_Object *navi_bar = elm_object_part_content_get(layout, "elm.swallow.content");
  86                         Elm_Object_Item *item = elm_naviframe_top_item_get(navi_bar);
  87                         Evas_Object *content = elm_object_item_content_get(item);
  88                         //SETTING_TRACE("content:%p", content);
  89
  90                         const char *type = elm_object_widget_type_get(content);
  91                         //SETTING_TRACE("content type:%s", type);
  92                         if (0 == safeStrCmp(type, "genlist")) {
  93                                 genlist = content;
  94                         } else if (NULL != type) {//type="layout","conformant" etc..
  95                                 //layout
  96                                 //genlist = elm_object_part_content_get(content, "elm.swallow.contents");
  97                                 const Eina_List *subobjs = elm_widget_sub_object_list_get(content);
  98                                 ret_if(!subobjs);
  99                                 Evas_Object *subobj;
 100                                 const Eina_List *l;
 101
 102                                 //just only search the first objects level
 103                                 EINA_LIST_FOREACH(subobjs, l, subobj) {
 104                                         if (!subobj) continue;
 105                                         type = elm_object_widget_type_get(subobj);
 106                                         if (0 == safeStrCmp(type, "genlist")) {
 107                                                 genlist = subobj;
 108                                                 Elm_Object_Item *first_item = elm_genlist_first_item_get(genlist);
 109                                                 if (first_item) {
 110                                                         elm_genlist_item_show(first_item, ELM_GENLIST_ITEM_SCROLLTO_TOP);
 111                                                 }
 112                                         }
 113                                 }
 114                                 return;//to return,because for this case,we need special process.
 115                         } else {
 116                                 //keep genlist to be NULL.
 117                         }
 118                         if (genlist && 0 == safeStrCmp(elm_object_widget_type_get(genlist), "genlist")) {
 119                                 SETTING_TRACE("Get the genlist:%p", genlist);
 120                                 Elm_Object_Item *first_item = elm_genlist_first_item_get(genlist);
 121                                 if (first_item) {
 122                                         elm_genlist_item_show(first_item, ELM_GENLIST_ITEM_SCROLLTO_TOP);
 123                                 }
 124                         }
 125                 }
 126         #endif
 127         } else {
 128                 setting_go_to_navibar_list_top(ad->navibar_main);
 129         }
 130 }
 131
 132 /**
 133 * The event process when hard key is pressed.
 134 */
 135 #if DISABLED_CODE
 136 static int setting_main_keydown_cb(void *data, int type, void *event)
 137 {
 138         SETTING_TRACE_BEGIN;
 139
 140         static int s_count = 0;
 141         Ecore_Event_Key *ev = event;
 142 #if APPLIED_BACK_KEY_UG
 143         if (!safeStrCmp(ev->keyname, KEY_END)) {
 144                 Evas_Object *popup = get_toppest_popup_window(ad->evas);
 145                 if (popup) {
 146                         /* "progressbar"ÀàÐÍµÄpopup, ²»×÷´¦Àí */
 147                         Evas_Object *content = elm_object_content_get(popup);
 148                         const char *type = elm_widget_type_get(content);
 149                         if (type && !safeStrCmp(type, "progressbar")) {
 150                                 SETTING_TRACE_DEBUG ("Found popup[%p], but it respresent a progress bar, so skip it.", popup);
 151                         } else {
 152                                 evas_object_smart_callback_call(popup, "timeout", NULL);
 153                         }
 154                 }
 155                 return;
 156         }
 157
 158         if (ad->isInUGMode) {   /* have some ug being loaded, it was reset to be FALSE in  setting_main_destroy_ug_cb() */
 159                 SETTING_TRACE("Send UG_KEY_EVENT_END to ug");
 160                 ug_send_key_event(UG_KEY_EVENT_END);
 161         } else {
 162                 if (elm_naviframe_top_item_get(ad->navibar_main)
 163                     == elm_naviframe_bottom_item_get(ad->navibar_main)) {
 164                         SETTING_TRACE("To exit Setting App");
 165                         elm_exit();
 166                 } else {
 167                         SETTING_TRACE("To pre-view of Setting App");
 168                         elm_naviframe_item_pop(ad->navibar_main);
 169                 }
 170         }
 171 }
 172 #else
 173         if (ev && !safeStrCmp(ev->keyname, KEY_END)) {
 174                 /* do nothing except exit */
 175                 SETTING_TRACE("before --- elm_exit ");
 176
 177                 elm_exit();
 178                 s_count = s_count + 1;
 179                 SETTING_TRACE("after --- elm_exit = %d ", s_count);
 180         }
 181 #endif
 182         SETTING_TRACE_END;
 183         return 1;
 184 }
 185 #endif
 186
 187 #if LOW_BATTERY_DO_NOTHING
 188
 189 /*  in case of low battery, don't terminate itself.*/
 190
 191 /**
 192 * The event process when battery becomes low.
 193 */
 194 static void setting_main_low_battery_cb(void *data)
 195 {
 196         SETTING_TRACE_BEGIN;
 197         setting_main_appdata *ad = data;
 198
 199         if (ad->ug)
 200                 ug_send_event(UG_EVENT_LOW_BATTERY);
 201 }
 202 #endif
 203
 204 #if SUPPORT_APP_ROATION
 205
 206 /**
 207 * To active rotation effect in Setting App
 208 */
 209 static void setting_main_rotate(app_device_orientation_e m, void *data)
 210 {
 211         SETTING_TRACE_BEGIN;
 212         setting_main_appdata *ad = data;
 213
 214         if (ad == NULL || ad->win_main == NULL)
 215                 return;
 216
 217 #if 0
 218                                 int value = 0;
 219                                 vconf_get_bool
 220                                     (VCONFKEY_SETAPPL_ROTATE_LOCK_BOOL, &value);
 221                                 // true  : aoto rotation OFF
 222                                 // false : auto rotation ON
 223                                 value = !value;
 224 #else
 225         //int hold_flag = 0;
 226         //vconf_get_bool (VCONFKEY_SETAPPL_ROTATE_HOLD_BOOL, &hold_flag);
 227         //SETTING_TRACE("hold_flag:%d", hold_flag);
 228         //if (hold_flag)
 229         //{
 230                 //do nothing..
 231         //      return;
 232         //}
 233
 234         int value = 0;
 235         vconf_get_bool (VCONFKEY_SETAPPL_AUTO_ROTATE_SCREEN_BOOL, &value);
 236
 237         if (value == 0)
 238                 m = 0;
 239
 240         elm_win_rotation_with_resize_set(ad->win_main, m);
 241
 242         /////Send the rotation event to UGs..
 243         enum ug_event event = UG_EVENT_ROTATE_PORTRAIT;
 244         switch (m) {
 245         case APP_DEVICE_ORIENTATION_0:
 246                 event = UG_EVENT_ROTATE_PORTRAIT;
 247                 break;
 248         case APP_DEVICE_ORIENTATION_180:
 249                 event = UG_EVENT_ROTATE_PORTRAIT_UPSIDEDOWN;
 250                 break;
 251         case APP_DEVICE_ORIENTATION_90:
 252                 event = UG_EVENT_ROTATE_LANDSCAPE;
 253                 break;
 254         case APP_DEVICE_ORIENTATION_270:
 255                 event = UG_EVENT_ROTATE_LANDSCAPE_UPSIDEDOWN;
 256                 break;
 257         default:
 258                 return;
 259         }
 260         ug_send_event(event);
 261         //elm_win_rotation_get
 262 #endif
 263
 264 }
 265 static void _rot_changed_cb(void *data, Evas_Object *obj, void *event_info)
 266 {
 267         SETTING_TRACE_BEGIN;
 268         setting_main_appdata *ad = (setting_main_appdata *)data;
 269         if (ad == NULL || ad->win_main == NULL )
 270                 return;
 271         int change_ang = elm_win_rotation_get(ad->win_main);
 272         SETTING_TRACE("....change_ang:%d",change_ang);
 273         SETTING_TRACE("current_rotation:%d",ad->current_rotation);
 274         //Send the rotation event to UGs..
 275         enum ug_event event = UG_EVENT_ROTATE_PORTRAIT;
 276         switch (change_ang) {
 277         case APP_DEVICE_ORIENTATION_0:
 278                 event = UG_EVENT_ROTATE_PORTRAIT;
 279                 break;
 280         case APP_DEVICE_ORIENTATION_180:
 281                 event = UG_EVENT_ROTATE_PORTRAIT_UPSIDEDOWN;
 282                 break;
 283         case APP_DEVICE_ORIENTATION_270:
 284                 event = UG_EVENT_ROTATE_LANDSCAPE;
 285                 break;
 286         case APP_DEVICE_ORIENTATION_90:
 287                 event = UG_EVENT_ROTATE_LANDSCAPE_UPSIDEDOWN;
 288                 break;
 289         default:
 290                 return;
 291         }
 292         SETTING_TRACE("diff:%d",elm_win_rotation_get(ad->win_main) - ad->current_rotation);
 293
 294         if (change_ang != ad->current_rotation)
 295         {
 296                 ug_send_event(event);
 297                 ad->current_rotation = change_ang;
 298         }
 299 }
 300 #endif
 301
 302 /**
 303 * The event process when region is changes.
 304 */
 305 static void setting_main_region_changed_cb(void *data)
 306 {
 307         setting_main_appdata *ad = data;
 308
 309         if (ad->ug)
 310                 ug_send_event(UG_EVENT_REGION_CHANGE);
 311 }
 312
 313 /**
 314 * The event process when win object is destroyed
 315 */
 316 static void setting_main_del_win(void *data, Evas_Object *obj, void *event)
 317 {
 318         elm_exit();
 319 }
 320
 321 void profile_changed_cb(void *data, Evas_Object * obj, void *event)
 322 {
 323         const char *profile = elm_config_profile_get();
 324
 325         if (strcmp(profile, "desktop") == 0)
 326                 elm_win_indicator_mode_set (obj, ELM_WIN_INDICATOR_HIDE);
 327         else
 328                 elm_win_indicator_mode_set (obj, ELM_WIN_INDICATOR_SHOW);
 329 }
 330
 331 /**
 332 * To create a win object, the win is shared between the App and all its UGs
 333 */
 334 static Evas_Object *setting_main_create_win(const char *name)
 335 {
 336         SETTING_TRACE_BEGIN;
 337         Evas_Object *eo;
 338         int w, h;
 339
 340         //eo = elm_win_add(NULL, name, ELM_WIN_BASIC);
 341         eo = elm_win_util_standard_add(name, name);
 342         if (eo) {
 343                 elm_win_title_set(eo, name);
 344                 evas_object_smart_callback_add(eo, "delete,request", setting_main_del_win, NULL);
 345                 evas_object_smart_callback_add(eo, "profile,changed", profile_changed_cb, NULL);
 346                 //elm_win_conformant_set(eo, EINA_TRUE);
 347                 ecore_x_window_size_get(ecore_x_window_root_first_get(),
 348                                         &w, &h);
 349                 evas_object_resize(eo, w, h);
 350         }
 351
 352         return eo;
 353 }
 354
 355 /**
 356 * exceptional process, reset the env vars by Setting vconf VCONFKEY_LANGSET
 357 */
 358 static void setting_main_lang_changed_cb(void *data)
 359 {
 360         SETTING_TRACE_BEGIN;
 361         setting_main_appdata *ad = data;
 362
 363         char* str = NULL;
 364         if (ad->data_wifi) {
 365             str = (char *)get_pa_Wi_Fi_on_off_str();
 366                 if ( ! str) str = g_strdup("err");
 367             ad->data_wifi->sub_desc = str;
 368         }
 369         if (ad->data_bt) {
 370             str = (char *)g_strdup(get_BT_on_off_str());
 371                 if ( ! str) str = g_strdup("err");
 372             ad->data_bt->sub_desc = str;
 373         }
 374         if (ad->data_nfc) {
 375             str = (char *)g_strdup(get_NFC_on_off_str());
 376                 if ( ! str) str = g_strdup("err");
 377             ad->data_nfc->sub_desc = str;
 378         }
 379         if (ad->data_bright) {
 380                 str = (char*)g_strdup(get_brightness_mode_str());
 381                 if ( ! str) str = g_strdup("err");
 382                 ad->data_bright->sub_desc = str;
 383         }
 384
 385         if (ad->data_moreConnect) {
 386                 char sub_text[MAX_COMMON_BUFFER_LEN] = {0, };
 387                 int idx = 0;
 388                 while (idx < MAX_MORE_MENU_NUM && ad->more_connective_menus[idx])
 389                 {
 390                         if (idx != 0)
 391                         {
 392                                 safeStrNCat(sub_text, ", ", MAX_COMMON_BUFFER_LEN);
 393                         }
 394                         safeStrNCat(sub_text, _(ad->more_connective_menus[idx]), MAX_COMMON_BUFFER_LEN);
 395                         idx++;
 396                 }
 397                 ad->data_moreConnect->sub_desc = g_strdup(sub_text);
 398         }
 399
 400         if (ad->data_moreSystem) {
 401                 char sub_text[MAX_COMMON_BUFFER_LEN] = {0, };
 402                 int idx = 0;
 403                 while (idx < MAX_MORE_MENU_NUM && ad->more_system_menus[idx])
 404                 {
 405                         if (idx != 0)
 406                         {
 407                                 safeStrNCat(sub_text, ", ", MAX_COMMON_BUFFER_LEN);
 408                         }
 409                         safeStrNCat(sub_text, _(ad->more_system_menus[idx]), MAX_COMMON_BUFFER_LEN);
 410                         idx++;
 411                 }
 412                 ad->data_moreSystem->sub_desc = g_strdup(sub_text);
 413         }
 414
 415         if (ad->main_genlist) elm_genlist_realized_items_update(ad->main_genlist);
 416         if (ad->genlist_load) elm_genlist_realized_items_update(ad->genlist_load);
 417
 418         Elm_Object_Item *navi_it = NULL;
 419 #if SUPPORT_MORE_ITEM_FUNCTION
 420         navi_it = elm_naviframe_top_item_get(ad->navibar_main);
 421         if (navi_it) elm_object_item_text_set(navi_it, _(KeyStr_MoreSystem));
 422 #endif
 423
 424         navi_it = elm_naviframe_bottom_item_get(ad->navibar_main);
 425         if (navi_it)
 426                 elm_object_item_text_set(navi_it, _("IDS_COM_BODY_SETTINGS"));
 427
 428         if (ad->edit_item)
 429         {
 430 #if SUPPORT_BOTTOM_BTNS
 431                 elm_object_item_text_set(ad->edit_item, _(EDIT_PREFERRED_STR));
 432 #else
 433                 Evas_Object *eo_btn = elm_object_item_part_content_get(ad->edit_item, "object");
 434                 setting_retm_if(eo_btn == NULL, "get eo_lbtn failed");
 435                 elm_object_text_set(eo_btn, _(EDIT_PREFERRED_STR));
 436 #endif
 437         }
 438
 439         if (ad->segment_all)
 440                 elm_object_item_text_set(ad->segment_all, _(ALL_STR));
 441         if (ad->segment_preferred)
 442                 elm_object_item_text_set(ad->segment_preferred, _(PREFERRED_STR));
 443
 444         // set toolbar text
 445         char tmp_text[MAX_DISPLAY_NAME_LEN_ON_UI + 1] = {0,};
 446         if (MAIN_PROFILE_ALL == ad->profile_type) {
 447                 snprintf(tmp_text, MAX_DISPLAY_NAME_LEN_ON_UI, "%s", _(PREFERRED_STR));
 448         } else if (MAIN_PROFILE_PREFERRED == ad->profile_type) {
 449                 snprintf(tmp_text, MAX_DISPLAY_NAME_LEN_ON_UI, "%s", _(ALL_STR));
 450         } else {
 451                 /* do nothing */
 452         }
 453         Evas_Object *btn = elm_object_item_part_content_get(navi_it, "toolbar_button1");
 454         elm_object_text_set(btn, tmp_text);
 455
 456
 457         if (ad->ug)
 458                 ug_send_event(UG_EVENT_LANG_CHANGE);
 459 }
 460
 461 /**
 462 * the event process when other VCONFS changes
 463 */
 464 static void setting_other_vconf_change_cb(keynode_t *key, void *data)
 465 {
 466         setting_main_appdata *ad = data;
 467         retm_if(!data, "Invalid argument: data is NULL");
 468
 469         Setting_GenGroupItem_Data* item_to_update = NULL;
 470         char *vconf_name = vconf_keynode_get_name(key);
 471         //SETTING_TRACE("the value of [ %s ] just changed", vconf_name);
 472
 473         if (!safeStrCmp(vconf_name, VCONFKEY_SETAPPL_WIDGET_THEME_STR)) {
 474                 return;
 475         } else if (!safeStrCmp(vconf_name, VCONFKEY_TELEPHONY_FLIGHT_MODE)) {
 476                 item_to_update = ad->data_flight;
 477                 retm_if(!item_to_update, "ad->data_flight is NULL");
 478
 479                 int status = 0;
 480                 vconf_get_bool(VCONFKEY_TELEPHONY_FLIGHT_MODE, &status);
 481                 item_to_update->chk_status = status;
 482                 //do not need delay for checks
 483                 elm_check_state_set(item_to_update->eo_check, item_to_update->chk_status);
 484
 485                 //Flight mode is ON : Network menu dimmed
 486                 if (ad->data_network)
 487                 {
 488                         if (status)
 489                         {
 490                                 setting_disable_genlist_item(ad->data_network->item);
 491                         }
 492                         else
 493                         {
 494                                 setting_enable_genlist_item(ad->data_network->item);
 495                         }
 496                 }
 497                 return;
 498         } else if (!safeStrCmp(vconf_name, VCONFKEY_SETAPPL_AUTO_ROTATE_SCREEN_BOOL)) {
 499                 item_to_update = ad->data_rotationMode;
 500                 retm_if(!item_to_update, "ad->data_rotationMode is NULL");
 501
 502                 int status = 0;
 503                 vconf_get_bool(VCONFKEY_SETAPPL_AUTO_ROTATE_SCREEN_BOOL, &status);
 504
 505                 item_to_update->chk_status = status;
 506                 //do not need delay for checks
 507                 elm_check_state_set(item_to_update->eo_check, item_to_update->chk_status);
 508                 SETTING_TRACE("item_to_update->chk_status:%d", item_to_update->chk_status);
 509                 if (item_to_update->chk_status) //rotation function is not blocked
 510                 {
 511                         SETTING_TRACE("Rotation function is on, it is necessary to adjust the device orientation");
 512                         //int mode = APP_DEVICE_ORIENTATION_0;
 513                         //mode = app_get_device_orientation();
 514                         //elm_win_rotation_with_resize_set(ad->win_main, mode);
 515                 }
 516
 517                 return;
 518         } else if (!safeStrCmp(vconf_name, VCONFKEY_NFC_STATE)) {
 519                 SETTING_TRACE_DEBUG("%s updated", vconf_name);
 520                 item_to_update = ad->data_nfc;
 521                 retm_if(!item_to_update, "ad->data_nfc is NULL");
 522
 523                 int status = 0;
 524                 vconf_get_bool(VCONFKEY_NFC_STATE, &status);
 525
 526                 item_to_update->swallow_type = SWALLOW_Type_1ICON_1RADIO;
 527                 item_to_update->chk_status = status;
 528                 //do not need delay for checks
 529                 elm_check_state_set(item_to_update->eo_check, item_to_update->chk_status);
 530                 SETTING_TRACE("item_to_update->chk_status:%d", item_to_update->chk_status);
 531
 532                 //item_to_update->sub_desc = (char *)g_strdup(get_NFC_on_off_str());
 533                 //SETTING_TRACE_DEBUG("%s", item_to_update->sub_desc);
 534
 535                 if (ad->bAppPause || ad->ug) {
 536                         ad->updateItems[GL_ITEM_NFC] = EINA_TRUE;
 537                 } else { // app is not in pause without ug
 538                         elm_object_item_data_set(item_to_update->item, item_to_update);
 539                         elm_genlist_item_update(item_to_update->item);
 540                 }
 541         }
 542 }
 543
 544 /**
 545 * the event process when int VCONFS changes
 546 * @todo code clean - it has big if-else structure
 547 */
 548 static void setting_int_vconf_change_cb(keynode_t *key, void *data)
 549 {
 550         setting_main_appdata *ad = data;
 551         retm_if(!data, "Invalid argument: data is NULL");
 552
 553         int status = vconf_keynode_get_int(key);
 554         char *vconf_name = vconf_keynode_get_name(key);
 555         SETTING_TRACE("Enter %s(%s=%d)", __FUNCTION__, vconf_name, status);
 556
 557         Setting_GenGroupItem_Data* item_to_update = NULL;
 558
 559         if (!safeStrCmp(vconf_name, VCONFKEY_WIFI_STATE)) {
 560         // do handling in case of VCONFKEY_WIFI_STATE
 561                 item_to_update = ad->data_wifi;
 562                 retm_if(!item_to_update, "ad->data_wifi is NULL");
 563
 564                 switch (status) {
 565                 case VCONFKEY_WIFI_OFF:
 566                         //item_to_update->sub_desc = (char *)g_strdup(_("IDS_COM_BODY_OFF_M_STATUS"));
 567
 568                         item_to_update->chk_status = EINA_FALSE;
 569                         break;
 570
 571                 case VCONFKEY_WIFI_UNCONNECTED:
 572                 case VCONFKEY_WIFI_CONNECTED:
 573                 case VCONFKEY_WIFI_TRANSFER:
 574                         //pa_wifi_device = vconf_get_str(VCONFKEY_WIFI_CONNECTED_AP_NAME);
 575                         //if (NULL != pa_wifi_device && '\0' != pa_wifi_device[0]) {
 576                         //      item_to_update->sub_desc = (char *)g_strdup(pa_wifi_device);
 577                         //} else {
 578                         //      item_to_update->sub_desc = (char *)g_strdup(_("IDS_COM_BODY_ON_M_STATUS"));
 579                         //}
 580                         //FREE(pa_wifi_device);
 581
 582                         item_to_update->chk_status = EINA_TRUE;
 583                         break;
 584                 default:
 585                         SETTING_TRACE_ERROR("Invalid wifi status!");
 586                         return;
 587                 }
 588
 589                 item_to_update->swallow_type = SWALLOW_Type_1ICON_1RADIO;
 590                 elm_check_state_set(item_to_update->eo_check, item_to_update->chk_status);
 591
 592                 if (ad->bAppPause || ad->ug) {
 593                         ad->updateItems[GL_ITEM_WIFI] = EINA_TRUE;
 594                 } else { // app is not in pause without ug
 595                         elm_object_item_data_set(item_to_update->item, item_to_update);
 596                         elm_genlist_item_update(item_to_update->item);
 597                 }
 598         }
 599         else if (!safeStrCmp(vconf_name, VCONFKEY_CALL_STATE)) {
 600         // do handling in case of VCONFKEY_CALL_STATE
 601                 // In call situation : Wi-fi / Tethering / Network menu dimmed
 602                 // --                                   Only Wi-fi should be dimmed (2013.04.04) --
 603                 if (VCONFKEY_CALL_OFF != status)
 604                 {
 605                         if (ad->data_network)
 606                                 setting_disable_genlist_item(ad->data_network->item);
 607                 }
 608                 else
 609                 {
 610                         if (ad->data_network)
 611                                 setting_enable_genlist_item(ad->data_network->item);
 612                 }
 613
 614         } else if (!safeStrCmp(vconf_name, VCONFKEY_BT_STATUS)) {
 615         // do handling in case of VCONFKEY_BT_STATUS
 616                 item_to_update = ad->data_bt;
 617                 retm_if(!item_to_update, "ad->data_bt is NULL");
 618 /*
 619                 if (FALSE == status) {
 620                 //      item_to_update->sub_desc = (char *)g_strdup(_("IDS_COM_BODY_OFF_M_STATUS"));
 621
 622                         item_to_update->chk_status = EINA_FALSE;
 623                 } else {
 624                         //item_to_update->sub_desc = (char *)g_strdup(_("IDS_COM_BODY_ON_M_STATUS"));
 625
 626                         item_to_update->chk_status = EINA_TRUE;
 627                 }
 628 */
 629                 item_to_update->swallow_type = SWALLOW_Type_1ICON_1RADIO;
 630                 item_to_update->chk_status = status;
 631                 elm_check_state_set(item_to_update->eo_check, item_to_update->chk_status);
 632
 633                 if (ad->bAppPause || ad->ug) {
 634                         ad->updateItems[GL_ITEM_BT] = EINA_TRUE;
 635                 } else { // app is not in pause without ug
 636                         elm_object_item_data_set(item_to_update->item, item_to_update);
 637                         elm_genlist_item_update(item_to_update->item);
 638                 }
 639         } else if (!safeStrCmp(vconf_name, VCONFKEY_SYSMAN_BATTERY_STATUS_LOW)) {
 640                 if (status <= VCONFKEY_SYSMAN_BAT_CRITICAL_LOW) {
 641                         if (ad->data_bright) {
 642                                 setting_disable_genlist_item(ad->data_bright->item);
 643                         }
 644                 } else {
 645                         if (ad->data_bright) {
 646                                 setting_enable_genlist_item(ad->data_bright->item);
 647                         }
 648
 649                 }
 650         }else if (!safeStrCmp(vconf_name, VCONFKEY_SETAPPL_BRIGHTNESS_AUTOMATIC_INT)) {
 651                 //update directly
 652                 if (ad->data_bright)
 653                 {
 654                         ad->data_bright->sub_desc = (char *)g_strdup(get_brightness_mode_str());
 655                         elm_object_item_data_set(ad->data_bright->item, ad->data_bright);
 656                         elm_genlist_item_update(ad->data_bright->item);
 657                 }
 658         } else {
 659                 SETTING_TRACE_ERROR("vconf_name is bad[%s]", vconf_name);
 660         }
 661
 662         return;
 663 }
 664
 665 /**
 666 * the event process when string VCONFS changes
 667 */
 668 static void setting_string_vconf_change_cb(keynode_t *key, void *data)
 669 {
 670         SETTING_TRACE_BEGIN;
 671         setting_main_appdata *ad = data;
 672         retm_if(!data, "Invalid argument: data is NULL");
 673
 674         char *value = vconf_keynode_get_str(key);
 675         char *vconf_name = vconf_keynode_get_name(key);
 676         Setting_GenGroupItem_Data* item_to_update = NULL;
 677
 678         if (!safeStrCmp(vconf_name, VCONFKEY_WIFI_CONNECTED_AP_NAME)) {
 679                 int status;
 680                 item_to_update = ad->data_wifi;
 681                 retm_if(!item_to_update, "ad->data_wifi is NULL");
 682
 683                 if (0 != vconf_get_int(VCONFKEY_WIFI_STATE, &status)) {
 684                         SETTING_TRACE_ERROR("vconf_get err: %s", VCONFKEY_WIFI_STATE);
 685                         return;
 686                 }
 687                 SETTING_TRACE("status:%d", status);
 688                 switch (status) {
 689                 case VCONFKEY_WIFI_OFF:
 690                         //item_to_update->sub_desc =
 691                         //      (char *)g_strdup(setting_gettext ("IDS_COM_BODY_OFF_M_STATUS"));
 692
 693                         item_to_update->chk_status = EINA_FALSE;
 694                         item_to_update->swallow_type = SWALLOW_Type_1ICON_1RADIO;
 695                         elm_check_state_set(item_to_update->eo_check, item_to_update->chk_status);
 696                         break;
 697
 698                 case VCONFKEY_WIFI_UNCONNECTED:
 699                 case VCONFKEY_WIFI_CONNECTED:
 700                 case VCONFKEY_WIFI_TRANSFER:
 701                         if (NULL != value && '\0' != value[0]) {
 702                                 SETTING_TRACE("wifi_device:%s", value);
 703                                 //item_to_update->sub_desc = (char *)g_strdup(value);
 704                         } else {
 705                                 //item_to_update->sub_desc =
 706                                 //      (char *) g_strdup(setting_gettext ("IDS_COM_BODY_ON_M_STATUS"));
 707                         }
 708
 709                         item_to_update->chk_status = EINA_TRUE;
 710                         item_to_update->swallow_type = SWALLOW_Type_1ICON_1RADIO;
 711                         elm_check_state_set(item_to_update->eo_check, item_to_update->chk_status);
 712                         break;
 713                 default:
 714                         SETTING_TRACE_ERROR("Invalid wifi status!");
 715                         return;
 716                 }
 717                 if (ad->bAppPause || ad->ug) {
 718                         ad->updateItems[GL_ITEM_WIFI] = EINA_TRUE;
 719                 } else { // app is not in pause without ug
 720                         elm_object_item_data_set(item_to_update->item, item_to_update);
 721                         elm_genlist_item_update(item_to_update->item);
 722                 }
 723         } // vconf_name == VCONFKEY_WIFI_CONNECTED_AP_NAME
 724 }
 725
 726
 727 /**
 728 * Do the process which cost much time
 729 */
 730 static Eina_Bool setting_on_idle_lazy(void *data)
 731 {
 732         SETTING_TRACE_BEGIN;
 733         setting_main_appdata *ad = data;
 734
 735         /* A. add system event callback */
 736         if (sensor_create(&ad->sf_handle) != SENSOR_ERROR_NONE) {
 737                 SETTING_TRACE_ERROR("sensor attach fail");
 738         }
 739
 740         if (sensor_motion_doubletap_set_cb(ad->sf_handle, __main_motion_sensor_cb, ad) != SENSOR_ERROR_NONE) {
 741                 SETTING_TRACE("sensor_motion_doubletap_set_cb fail to gather data");
 742         }
 743
 744         if (sensor_start(ad->sf_handle, SENSOR_MOTION_DOUBLETAP) != SENSOR_ERROR_NONE) {
 745                 SETTING_TRACE_ERROR("sensor_start fail");
 746         }
 747
 748 #if SUPPORT_APP_ROATION
 749         evas_object_geometry_get(ad->win_main, &g_geometry_x, &g_geometry_y, &g_geometry_w, &g_geometry_h);
 750 #endif
 751
 752         return FALSE;
 753 }
 754
 755 /**
 756 * The function is called to create Setting view widgets
 757 */
 758 static bool setting_main_app_create(void *data)
 759 {
 760         SETTING_TRACE_BEGIN;
 761         //fprintf(stderr, "[TIME] 3. it taked %d msec from main to setting_main_app_create \n", appcore_measure_time());
 762         //SETTING_TRACE("[TIME] 3. it taked %d msec from main to setting_main_app_create ", appcore_measure_time());
 763         //appcore_measure_start();
 764         setting_main_appdata *ad = data;
 765
 766         // registering sigterm
 767         if (signal(SIGTERM, termination_handler) == SIG_IGN)
 768         {
 769                 signal(SIGTERM, SIG_IGN);
 770         }
 771
 772         ad->data_roaming_popup = NULL;
 773
 774         /* create window */
 775         ad->win_main = setting_main_create_win(SETTING_PACKAGE);
 776         setting_retvm_if(ad->win_main == NULL, SETTING_RETURN_FAIL, "window is null");
 777         evas_object_show(ad->win_main);
 778         UG_INIT_EFL(ad->win_main, UG_OPT_INDICATOR_ENABLE);
 779         ad->evas = evas_object_evas_get(ad->win_main);
 780         ad->current_rotation = elm_win_rotation_get(ad->win_main);
 781         SETTING_TRACE("ad->current_rotation:%d",ad->current_rotation);
 782         if (elm_win_wm_rotation_supported_get(ad->win_main))
 783         {
 784                 int rots[4] = { 0, 90, 180, 270 };  // rotation value that app may want
 785                 elm_win_wm_rotation_available_rotations_set(ad->win_main, &rots, 4);
 786         }
 787         evas_object_smart_callback_add(ad->win_main, "wm,rotation,changed", _rot_changed_cb, ad);
 788
 789         /* load config file */
 790         int cfg_operation_ret = setting_cfg_init();
 791         //PLUGIN_INIT(ad);
 792
 793         elm_theme_extension_add(NULL, SETTING_THEME_EDJ_NAME);
 794 #if SUPPORT_LCD_TIMEOUT_KEEPING
 795         /* to keep according with each other */
 796         int origin_backlight_value;
 797         if (0 !=
 798             vconf_get_int(VCONFKEY_SETAPPL_LCD_TIMEOUT_NORMAL,
 799                           &origin_backlight_value)) {
 800                 /* error handle.. */
 801                 vconf_set_int(VCONFKEY_SETAPPL_LCD_TIMEOUT_NORMAL, 30);
 802                 origin_backlight_value = 30;
 803         }
 804         /* to set intial value */
 805         vconf_set_int(VCONFKEY_LCD_TIMEOUT_NORMAL_BACKUP,
 806                       origin_backlight_value);
 807
 808         /* Firstly, Setting is running in foreground, LCD_TIMEOUT must be 600s(/10m) */
 809         vconf_set_int(VCONFKEY_SETAPPL_LCD_TIMEOUT_NORMAL, 600);
 810 #endif
 811
 812         elm_win_indicator_mode_set(ad->win_main, ELM_WIN_INDICATOR_SHOW);
 813
 814         setting_view_create(&setting_view_main, ad);
 815         setting_view_node_table_register(&setting_view_main, NULL);
 816         setting_view_node_table_register(&setting_view_more_menu, &setting_view_main);
 817
 818         /* error handling */
 819         if (Cfg_Error_Type_Sucess != cfg_operation_ret) {
 820                 SETTING_TRACE_ERROR("cfg_operation_ret: %d", cfg_operation_ret);
 821                 const char *notifyStr = NULL;
 822                 switch (cfg_operation_ret) {
 823
 824                 case Cfg_Error_Type_CreateCfg_Failed:
 825                         {
 826                                 notifyStr = _("failed to create config file, <br>re-install org.tizen.setting please");
 827                                 break;
 828                         }
 829                 case Cfg_Error_Type_Mkdir_Failed:
 830                         {
 831                                 notifyStr = _("file system missed<br>/opt/usr/data/setting, <br>re-install org.tizen.setting please");
 832                                 break;
 833                         }
 834                 case Cfg_Error_Type_RemoveCfg_Failed:
 835                         {
 836                                 notifyStr = _("config file size 0 byte<br>and failed to re-create it.<br>try to startup the app again");
 837                                 break;
 838                         }
 839                 case Cfg_Error_Type_ReadCfg_Failed:
 840                         {
 841                                 notifyStr = _("failed to read config file, <br>try to startup the app again");
 842                                 break;
 843                         }
 844                 case Cfg_Error_Type_DirPermissionDenied:
 845                         {
 846                                 notifyStr =
 847                                     _("the dir of config file permission denied");
 848                                 break;
 849                         }
 850                 case Cfg_Error_Type_FilePermissionDenied:
 851                         {
 852                                 notifyStr = _("config file permission denied");
 853                                 break;
 854                         }
 855                 default:
 856                         {
 857                                 notifyStr = _("Invalid Result, try to startup the app again");
 858                                 break;
 859                         }
 860                 }
 861                 setting_create_popup_without_btn(ad, ad->win_main, NULL, (char *)notifyStr, NULL, 10, FALSE, FALSE);
 862                 return SETTING_RETURN_FAIL;
 863         }
 864         //fprintf(stderr, "[TIME] 4. setting_main_app_create taked %d msec \n", appcore_measure_time());
 865         //SETTING_TRACE("[TIME] 4. setting_main_app_create taked %d msec ", appcore_measure_time());
 866         //appcore_measure_start();
 867
 868         // set default local automatically
 869         set_defaultLangICU();
 870         return true;
 871 }
 872
 873 /**
 874 * The function is called when Setting is terminated
 875 */
 876 static int setting_main_app_terminate(void *data)
 877 {
 878         SETTING_TRACE_BEGIN;
 879         setting_main_appdata *ad = data;
 880         //vconf_set_bool (VCONFKEY_SETAPPL_ROTATE_HOLD_BOOL, FALSE);
 881
 882         setting_cfg_exit();
 883         clear_system_service_data();
 884
 885         ug_destroy_all();
 886         ad->ug = NULL;
 887
 888         SETTING_TRACE("%s*** SETTING APPLICATION CLOSED ***%s",
 889                       SETTING_FONT_BGREEN, SETTING_FONT_BLACK);
 890
 891         DEREGISTER_VCONFS(ad->listened_list);
 892
 893         if (sensor_motion_doubletap_unset_cb(ad->sf_handle) != SENSOR_ERROR_NONE) {
 894                 SETTING_TRACE("sensor_motion_doubletap_unset_cb fail to gather data");
 895         }
 896         sensor_stop(ad->sf_handle, SENSOR_MOTION_DOUBLETAP);
 897         sensor_destroy(ad->sf_handle);
 898
 899 #if SUPPORT_LCD_TIMEOUT_KEEPING
 900         /* once Setting is not running, LCD_TIMEOUT must be backuped */
 901         int back_value = 0;
 902         vconf_get_int(VCONFKEY_LCD_TIMEOUT_NORMAL_BACKUP, &back_value);
 903         vconf_set_int(VCONFKEY_SETAPPL_LCD_TIMEOUT_NORMAL, back_value);
 904 #endif
 905         setting_view_destroy(&setting_view_more_menu, ad);
 906         setting_view_destroy(&setting_view_main, ad);
 907         SETTING_TRACE("!!! After setting_view_destroy");
 908         if (ad->win_main) {
 909                 evas_object_del(ad->win_main);
 910                 ad->win_main = NULL;
 911         }
 912
 913         SETTING_TRACE_END;
 914         return 0;
 915 }
 916
 917 /**
 918 * The function is called when Setting begins run in background from forground
 919 */
 920 static void setting_main_app_pause(void *data)
 921 {
 922         SETTING_TRACE_BEGIN;
 923         setting_main_appdata *ad = data;
 924
 925         ad->bAppPause = EINA_TRUE;
 926         if (ad->ug)
 927                 ug_pause();
 928
 929 #if SUPPORT_LCD_TIMEOUT_KEEPING
 930         /* once Setting is running in background, LCD_TIMEOUT must be backuped */
 931         int back_value = 0;
 932         vconf_get_int(VCONFKEY_LCD_TIMEOUT_NORMAL_BACKUP, &back_value);
 933         vconf_set_int(VCONFKEY_SETAPPL_LCD_TIMEOUT_NORMAL, back_value);
 934 #endif
 935
 936         sensor_stop(ad->sf_handle, SENSOR_MOTION_DOUBLETAP);
 937
 938 }
 939
 940 /**
 941 * The function is called when Setting begins run in forground from background
 942 */
 943 static void setting_main_app_resume(void *data)
 944 {
 945         SETTING_TRACE_BEGIN;
 946         setting_main_appdata *ad = data;
 947
 948         if (sensor_start(ad->sf_handle, SENSOR_MOTION_DOUBLETAP) != SENSOR_ERROR_NONE) {
 949                 SETTING_TRACE_ERROR("sf_start fail");
 950         }
 951
 952         if (ad->ug)
 953                 ug_resume();
 954
 955 #if SUPPORT_LCD_TIMEOUT_KEEPING
 956         /* once Setting is running in foreground, LCD_TIMEOUT must be reset to 600 */
 957         vconf_set_int(VCONFKEY_SETAPPL_LCD_TIMEOUT_NORMAL, 600);
 958 #endif
 959
 960         // update main genlist in resuming app.
 961         ad->bAppPause = EINA_FALSE;
 962         if(!ad->ug) {   // top-level view is not on UG
 963                 SETTING_TRACE("update main genlist in resuming app without UG");
 964                 setting_update_gl_item(ad);     // update genlist sub-texts
 965         }
 966 }
 967
 968 /**
 969  * The function is called by app-fwk after app_create. It always do the process which cost much time.
 970  */
 971 static void setting_main_app_reset(service_h service, void *data)
 972 {
 973         SETTING_TRACE_BEGIN;
 974         setting_main_appdata *ad = data;
 975
 976         int value = 0;
 977         vconf_get_bool (VCONFKEY_SETAPPL_AUTO_ROTATE_SCREEN_BOOL, &value);
 978         SETTING_TRACE("value:%d", value);
 979         if (value) //rotation function is not blocked
 980         {
 981                 SETTING_TRACE("Rotation function is on, it is necessary to adjust the device orientation");
 982                 //int mode = APP_DEVICE_ORIENTATION_0;
 983                 //mode = app_get_device_orientation();
 984                 //elm_win_rotation_with_resize_set(ad->win_main, mode);
 985         }
 986
 987         vconf_callback_fn cb = NULL;
 988
 989         cb = setting_int_vconf_change_cb;
 990         REGISTER_VCONF_NODE(ad->listened_list, VCONFKEY_BT_STATUS, cb, data);
 991         REGISTER_VCONF_NODE(ad->listened_list, VCONFKEY_WIFI_STATE, cb, ad);
 992         REGISTER_VCONF_NODE(ad->listened_list, VCONFKEY_CALL_STATE, cb, ad);
 993
 994         //do need to disable 'Brightness' menu,just disable sub-items in 'Brightness' menu
 995         //REGISTER_VCONF_NODE(ad->listened_list, VCONFKEY_SYSMAN_BATTERY_STATUS_LOW, cb, ad);
 996         REGISTER_VCONF_NODE(ad->listened_list, VCONFKEY_SETAPPL_BRIGHTNESS_AUTOMATIC_INT, cb, data);
 997
 998         cb = setting_string_vconf_change_cb;
 999         REGISTER_VCONF_NODE(ad->listened_list, VCONFKEY_WIFI_CONNECTED_AP_NAME, cb, ad);
1000
1001         cb = setting_other_vconf_change_cb;
1002         REGISTER_VCONF_NODE(ad->listened_list, VCONFKEY_SETAPPL_USB_MODE_INT, cb, ad);
1003         REGISTER_VCONF_NODE(ad->listened_list, VCONFKEY_SETAPPL_WIDGET_THEME_STR, cb, ad);
1004
1005         REGISTER_VCONF_NODE(ad->listened_list, VCONFKEY_TELEPHONY_FLIGHT_MODE, cb, ad);
1006         REGISTER_VCONF_NODE(ad->listened_list, VCONFKEY_SETAPPL_AUTO_ROTATE_SCREEN_BOOL, cb, ad);
1007         REGISTER_VCONF_NODE(ad->listened_list, VCONFKEY_NFC_STATE, cb, ad);
1008
1009         if (ad->win_main)
1010                 elm_win_activate(ad->win_main);
1011
1012         ecore_idler_add(setting_on_idle_lazy, ad);
1013
1014         int flight_mode = 0;
1015         vconf_get_bool(VCONFKEY_TELEPHONY_FLIGHT_MODE, &flight_mode);
1016         if (flight_mode)
1017         {
1018                 if (ad->data_network) setting_disable_genlist_item(ad->data_network->item);
1019         }
1020
1021         int call_status = VCONFKEY_CALL_OFF;
1022         vconf_get_int(VCONFKEY_CALL_STATE, &call_status);
1023         if (VCONFKEY_CALL_OFF != call_status)
1024         {
1025                 if (ad->data_network) setting_disable_genlist_item(ad->data_network->item);
1026                 if (ad->data_wifi) setting_disable_genlist_item(ad->data_wifi->item);
1027                 //if (ad->data_mobileApp) setting_disable_genlist_item(ad->data_mobileApp->item);
1028         }
1029
1030         /* for jumping view */
1031         service_get_extra_data(service, "view_to_jump", &(ad->view_to_jump));
1032         if(ad->view_to_jump)
1033         {
1034                 SETTING_TRACE_DEBUG("view to jump is %s", ad->view_to_jump);
1035                 /* Jumping */
1036                 if(!safeStrCmp(ad->view_to_jump, KeyStr_Sounds))
1037                 {
1038
1039                         SETTING_TRACE_DEBUG("Kill launched ug.");
1040                         if(ad->isInUGMode == TRUE && (safeStrCmp(ad->cur_loaded_ug, "setting-profile-efl") != 0))
1041                         {
1042                                 ug_destroy_all();
1043                                 ad->ug = NULL;
1044                         }
1045                         if(ad->isInUGMode == TRUE && (safeStrCmp(ad->cur_loaded_ug, "setting-profile-efl") == 0))
1046                         {
1047                                 return;
1048                         }
1049
1050                         struct ug_cbs *cbs = (struct ug_cbs *)calloc(1, sizeof(struct ug_cbs));
1051                         setting_retm_if(!cbs, "calloc failed");
1052                         cbs->layout_cb = setting_main_layout_ug_cb;
1053                         cbs->result_cb = setting_main_result_ug_cb;
1054                         cbs->destroy_cb = setting_main_destroy_ug_cb;
1055                         cbs->priv = (void *)ad;
1056
1057                         SETTING_TRACE_DEBUG("call setting-profile-efl ug");
1058                         ad->ug = ug_create(NULL, "setting-profile-efl", UG_MODE_FULLVIEW, 0, cbs);
1059                         if (ad->ug) {
1060                                 ad->isInUGMode = TRUE;
1061                                 memset(ad->cur_loaded_ug, 0x00, MAX_DISPLAY_NAME_LEN_ON_UI);
1062                                 safeCopyStr(ad->cur_loaded_ug, "setting-profile-efl", MAX_DISPLAY_NAME_LEN_ON_UI);
1063                         } else {
1064                                 evas_object_show(ad->ly_main);
1065
1066                                 SETTING_TRACE_ERROR("errno:%d", errno);
1067                                 setting_create_simple_popup(ad, ad->win_main, NULL, NO_UG_FOUND_MSG);
1068                         }
1069                         if (cbs)
1070                                 FREE(cbs);
1071                         cbs = NULL;
1072                         ad->view_to_jump = NULL;
1073                 }
1074         }
1075         else
1076         {
1077                 SETTING_TRACE_DEBUG("No need to jump view. Draw main.");
1078         }
1079 }
1080
1081 int main(int argc, char *argv[])
1082 {
1083         int r = 0;
1084         setting_main_appdata ad;
1085
1086         elm_init(argc, argv);
1087 #if SUPPORT_GL_ENGINE
1088         // opengl_x11 or software_x11
1089         elm_config_preferred_engine_set("software_x11");
1090 #endif
1091
1092         //fprintf(stderr, "[TIME] 1. aul_launch -> main :: Setting main : %d msec \n", appcore_measure_time_from("APP_START_TIME"));
1093         //SETTING_TRACE("[TIME] 1. aul_launch -> main :: Setting main : %d msec ", appcore_measure_time_from("APP_START_TIME"));
1094         //appcore_measure_start();
1095
1096         app_event_callback_s ops = {
1097                 .create = setting_main_app_create,
1098                 .terminate = setting_main_app_terminate,
1099                 .pause = setting_main_app_pause,
1100                 .resume = setting_main_app_resume,
1101                 .service = setting_main_app_reset,
1102                 .low_battery = setting_main_low_battery_cb,
1103                 .language_changed = setting_main_lang_changed_cb,
1104                 .region_format_changed = setting_main_region_changed_cb,
1105                 .device_orientation = NULL,
1106         };
1107
1108
1109         memset(&ad, 0x00, sizeof(setting_main_appdata));
1110
1111         //fprintf(stderr, "[TIME] 2. main : %d msec \n", appcore_measure_time());
1112         //SETTING_TRACE("[TIME] 2. main : %d msec ", appcore_measure_time());
1113         //appcore_measure_start();
1114         r = app_efl_main(&argc, &argv, &ops, &ad);
1115         retv_if(r == -1, -1);
1116
1117         return 0;
1118 }