--- /dev/null
+#<file system> <mount point> <type> <options> <dump> <pass>
+none /proc proc defaults 0 0
+none /dev/pts devpts mode=0622 0 0
+tmpfs /tmp tmpfs defaults 0 0
+#tmpfs /var tmpfs defaults 0 0
+none /sys sysfs defaults 0 0
+
+#/dev/mmcblk0p2 /boot vfat defaults 0 0
+#/dev/mmcblk0p5 / ext4 defaults 0 0
+/dev/sda1 / auto defaults 0 0
+LABEL=boot /boot auto defaults 0 0
+LABEL=opt /opt auto defaults 0 0
+#/dev/mmcblk0p6 /opt ext4 defaults 0 0
+#/dev/mmcblk0p7 /mnt/csc ext4 defaults 0 0
+#/dev/mmcblk0p8 /mnt/ums vfat uid=0,gid=0,dmask=0000,fmask=0000,iocharset=iso8859-1,utf8,shortname=mixed 0 0
--- /dev/null
+#System startup
+si::sysinit:/etc/rc.d/rc.sysinit
+net::once:/etc/rc.d/rc.network
+
+id:1:initdefault:
+
+# tty
+1:12345:respawn:/sbin/mingetty --noclear tty1
+2:12345:respawn:/sbin/mingetty tty2
+
+# serial console
+#ttyS0::respawn:/bin/sh
+#s1:12345:respawn:/sbin/getty -L 115200 ttyS0 vt100
+#::askfirst:/bin/sh
+
+#Logging , move to rc.sysinit
+#::sysinit:/bin/cp -rf /var/log/messages /var/log/messages.prev
+#::sysinit:/bin/cp -rf /var/log/messages.0 /var/log/messages.0.prev
+#::sysinit:/bin/touch /var/log/messages
+#::once:/sbin/syslogd
+#::once:/sbin/klogd
+
+#System shutdown
+#ca:12345:ctrlaltdel:/sbin/reboot
+bye:06:wait:/etc/rc.d/rc.shutdown
+rebt:6:wait:/sbin/reboot -d -f -i
+
+# Frambuffer Console
+#ttyS1::respawn:/bin/sh
+#tty1::respawn:/bin/sh
+#tty2::respawn:/bin/sh
--- /dev/null
+# Example mtools.conf files. Uncomment the lines which correspond to
+# your architecture and comment out the "SAMPLE FILE" line below
+# SAMPLE FILE
+
+# # Linux floppy drives
+# drive a: file="/dev/fd0" exclusive
+# drive b: file="/dev/fd1" exclusive
+
+# # First SCSI hard disk partition
+# drive c: file="/dev/sda1"
+
+# # First IDE hard disk partition
+# drive c: file="/dev/hda1"
+
+# # dosemu floppy image
+# drive m: file="/var/lib/dosemu/diskimage"
+
+# # dosemu hdimage
+# drive n: file="/var/lib/dosemu/diskimage" offset=3840
+
+# # Atari ramdisk image
+# drive o: file="/tmp/atari_rd" offset=136
+
+# # ZIP disk for Solaris:
+# Drive X is ZIP-100 at target 5
+# drive X: file="/dev/rdsk/c0t5d0s2" partition=4 scsi=1 nodelay
+
+# # ZIP disk for SunOS:
+# # Zip drive is at target 5, which default kernel calls tape st1 !!
+# drive Y: file="/dev/rsd5c" partition=4 scsi=1 nodelay
+
+# # autoselect zip drive/floppy on HP-UX 9/10
+# drive a: file="/dev/rdsk/c201d5" exclusive partition=4
+# drive a: file="/dev/rdsk/c201d5s0" exclusive partition=4
+# drive a: file="/dev/rfloppy/c201d0s0" exclusive
+
+# A/UX target 5 on 1st scsi bus jaz or zip
+# drive X: file="/dev/rdsk/c105d0s31" partition=4
+
+
+# Some examples for BeOS.
+# floppy drive. hardcoded in devices.c, so no real need to define it here
+#drive a: file="/dev/floppy_disk" exclusive
+# ZIP drive on SCSI ID 6
+#drive z: file="/dev/scsi_disk_060" offset=16384 fat_bits=16
+
+# SCO Unix 3.2v4
+# # Floppy disk drives
+#
+# drive a: file="/dev/install" exclusive
+# drive b: file="/dev/install1" exclusive
+#
+# # SCSI hard disk partitions
+#
+# drive c: file="/dev/dsk/0sC"
+# drive d: file="/dev/dsk/0sD"
+# drive e: file="/dev/dsk/0sE"
+drive f: file="/dev/mmcblk0p1"
+# drive g: file="/dev/dsk/0sG"
+# drive h: file="/dev/dsk/0sH"
+
+mtools_skip_check=1
+
+# # uncomment the following line to display all file names in lower
+# # case by default
+# mtools_lower_case=1
--- /dev/null
+
+export PWROFF_DUR=3
--- /dev/null
+#!/bin/sh
+
+# Color set for ANSI TERM
+_R='\033[0;31;1m' #Red
+_G='\033[0;32;1m' #Green
+_Y='\033[0;33;1m' #Yellow
+C_='\033[0m' #Color off
+
+echo -e "[${_G}rc.emul : script start ${C_}]"
+
+echo -e "[${_G}chmod +x /opt/media for various apps ${C_}]"
+chmod -R 777 /opt/media
+
+echo -e "[${_G}make symbolic link ${C_}]"
+ln -sf /mnt/mmc /sdcard
+ln -sf /proc/mounts /etc/mtab
+
+echo -e "[${_G}Setting power manager state value ${C_}]"
+/usr/bin/vconftool set -t int memory/pwrmgr/state 1
+
+echo -e "[${_G}Initialize battery level ${C_}]"
+/usr/bin/vconftool set -t int memory/Battery/Level 5
+/usr/bin/vconftool set -t int memory/Battery/Status/Low 4
+
+echo -e "[${_G}Mount SD card ${C_}]"
+mount /dev/mmcblk0 /mnt/mmc
+
+MMC_MOUNT=`/bin/mount | grep mmc`
+if [ -n "$MMC_MOUNT" ]; then
+ echo -e "[${_G}MMC storage detected ${C_}]"
+ /usr/bin/vconftool set -t int memory/Device/Mmc 1
+ /usr/bin/vconftool set -t int memory/filemanager/Mmc 2
+fi
+
+echo -e "[${_G}Initialize display setting value${C_}]"
+/usr/bin/vconftool set -t int db/setting/Brightness "24"
+/usr/bin/vconftool set -t int db/MainLCD/Backlight/Normal "600"
+
+echo -e "[${_G}For menu_screen booting..${C_}]"
+/usr/bin/vconftool set -t int memory/startapps/sequence 1
+
+echo -e "[${_G}rc.emul : script end ${C_}]"
--- /dev/null
+export DISPLAY=:0
+
+echo "Kill all running applications"
+/usr/bin/enter_deepsleep
+
+echo "Reload Menuscreen"
+vconftool -t int set memory/menuscreen/reload 3
+
+echo "Stoppping Boot animation..."
+nice -n -15 /usr/bin/boot-animation --off &
+
+CHK_ANI=0
+while [ "$CHK_ANI" != "1" ]; do
+ echo "waiting animation finished.."
+ sleep 0.5
+ CHK_ANI=`vconftool get memory/boot-animation/finished | awk '{print $4}'`
+done
+
+#echo 4 > /sys/class/graphics/fb0/blank
+
--- /dev/null
+#!/bin/sh
+
+#/sbin/ldconfig -f /opt/etc/ld.so.conf -C /opt/etc/ld.so.cache
+/sbin/ldconfig
+
+# Check 3-touchkey firmware
+/lib/firmware/firmware_upgrade_touchkey.sh
+
+#Check machine is P1P2
+MACHINE=`grep Hardware /proc/cpuinfo|cut -d ":" -f 2|tr -d " "`
+if [ $MACHINE == "P1P2" ];then
+ ln -s /opt/etc/X11/xorg.conf.d.p1p2 /opt/etc/X11/xorg.conf.d
+ # motor sensor has not been implemented yet
+ rm -f /usr/driver/tspdrv.ko
+else
+ ln -s /opt/etc/X11/xorg.conf.d.default /opt/etc/X11/xorg.conf.d
+fi
+
+# Copy alsa scenario file for sound temporary
+if [ ! -e /opt/etc/sound ]; then
+ mkdir -p /opt/etc/sound
+fi
+
+if [ $MACHINE == "F1" ]; then
+ cp -r /usr/share/ascenario/mc1n2 /opt/etc/sound/default
+ cp -r /usr/share/ascenario/mc1n2.conf /opt/etc/sound/default.conf
+else
+ cp -r /usr/share/ascenario/wm8994 /opt/etc/sound/default
+ cp -r /usr/share/ascenario/wm8994.conf /opt/etc/sound/default.conf
+fi
+
+chown root:soundpath /opt/etc/sound/default.conf
+chown -R root:soundpath /opt/etc/sound/default
+
+if [ -e /opt/system/csc/.factoryreset ]; then
+ rm -f /opt/system/csc/.factoryreset
+fi
+sync
--- /dev/null
+export DISPLAY=:0
+
+echo "Stoppping Boot animation..."
+vconftool set -t string memory/boot-animation/restart start:restart
+
--- /dev/null
+
+[ -x /usr/sbin/sshd-hostkeys ] && /usr/sbin/sshd-hostkeys
+
+[ -x /sbin/wpa_supplicant ] && /sbin/wpa_supplicant -u &
+
+[ -x /usr/sbin/bluetoothd ] && /usr/sbin/bluetoothd &
+
+ifconfig lo 127.0.0.1 up
+
+[ -x /usr/sbin/sshd ] && /usr/sbin/sshd
+
--- /dev/null
+export DISPLAY=:0
+killall power_manager
+killall -9 udevd
+#killall -9 system_server
+killall -9 xinit
+
+rm -rf /tmp/vip/*
+rm -rf /tmp/permanent/*
+
+echo "Run Shutdown animation..."
+nice -n -15 /usr/bin/boot-animation --offmsg " " &
+sleep 1
+
+echo "Stopping menu screen..."
+killall -9 menu_screen
+
+echo "Stopping all applications..."
+/usr/bin/enter_deepsleep
+
+echo "Stopping indicator..."
+killall -9 indicator
+
+
+# factory resetting...
+# flag set by factory-reset.sh
+if [ -f /opt/.factoryreset ]; then
+ /usr/bin/run-factory-reset.sh
+fi
+
+#echo 4 > /sys/class/graphics/fb0/blank
+
--- /dev/null
+#!/bin/sh
+
+# Color set for ANSI TERM
+_R='\033[0;31;1m' #Red
+_G='\033[0;32;1m' #Green
+_Y='\033[0;33;1m' #Yellow
+C_='\033[0m' #Color off
+
+
+echo -e "[${_G}rc.sysinit : script starts${C_}]"
+echo -e "[${_G}mount...${C_}]"
+mount -n -t proc none /proc
+mount -n -t tmpfs tmpfs /tmp
+mount -n -t sysfs none /sys
+
+touch /dev/.in_sysinit >/dev/null 2>&1
+
+nice -n 20 /sbin/start_udev
+
+mount -n /dev/pts >/dev/null 2>&1
+
+remount_needed() {
+ local state oldifs
+ state=`LC_ALL=C awk '/ \/ / && ($3 !~ /rootfs/) { print $4 }' /proc/mounts`
+ oldifs=$IFS
+ IFS=","
+ for opt in $state ; do
+ if [ "$opt" = "rw" ]; then
+ IFS=$oldifs
+ return 1
+ fi
+ done
+ IFS=$oldifs
+ return 0
+}
+
+# Remount the root filesystem read-write.
+if remount_needed ; then
+ ionice -t -c 1 -n 0 mount -n -o remount,rw /
+fi
+
+
+
+# Clear mtab
+(> /etc/mtab) &> /dev/null
+
+# Remove stale backups
+rm -f /etc/mtab~ /etc/mtab~~
+
+
+# Clean up various /tmp bits
+rm -f /tmp/.X*-lock /tmp/.lock.* /tmp/.gdm_socket /tmp/.s.PGSQL.*
+rm -rf /tmp/.X*-unix /tmp/.ICE-unix /tmp/.font-unix /tmp/hsperfdata_* \
+ /tmp/kde-* /tmp/ksocket-* /tmp/mc-* /tmp/mcop-* /tmp/orbit-* \
+ /tmp/scrollkeeper-* /tmp/ssh-*
+
+# Enter mounted filesystems into /etc/mtab
+mount -f /
+mount -f /proc >/dev/null 2>&1
+mount -f /sys >/dev/null 2>&1
+mount -f /dev/pts >/dev/null 2>&1
+mount -f /proc/bus/usb >/dev/null 2>&1
+
+# /var/{lock,run}
+mount -t tmpfs tmpfs /var/lock -o size=4m
+mount -t tmpfs tmpfs /var/run -o size=4m
+mkdir /var/run/console
+mkdir -p /var/lock/subsys
+
+# Mount all other filesystems (except for NFS and /proc, which is already
+# mounted). Contrary to standard usage,
+# filesystems are NOT unmounted in single user mode.
+mount -a -t nonfs,nfs4,smbfs,cifs -O no_netdev
+mount -t debugfs none /sys/kernel/debug/
+
+
+echo -e "[${_G}create base directory in /opt, /var${C_}]"
+#ln -s /opt/var/log /var/log
+mkdir -p /opt/var/lib
+#ln -s /opt/var/lib /var/lib # for apt
+mkdir -p /opt/var/cache
+#ln -s /opt/var/cache /var/cache # for apt
+#mkdir -p /var/run
+
+if [ ! -e /opt/etc/.firstboot ]; then
+ echo -e "[${_Y}rc.firstboot${C_}]"
+ /etc/rc.d/rc.firstboot
+ touch /opt/etc/.firstboot
+
+ if [ -e /etc/rc.d/rc.run_hibernation ]; then
+ touch /opt/etc/.hib_capturing
+ fi
+fi
+
+echo -e "[${_G}set device node perm & security${C_}]"
+# Set device node permissions for security
+test -c /dev/video0 && chown 0:6501 /dev/video0
+test -c /dev/s3c-jpg && chown 0:6501 /dev/s3c-jpg
+test -c /dev/pvrsrvkm && chmod 666 /dev/pvrsrvkm
+test -c /dev/log_main && chown 0:6509 /dev/log_main
+test -c /dev/log_events && chown 0:6509 /dev/log_events
+test -c /dev/log_radio && chown 0:6509 /dev/log_radio
+test -c /dev/snd/ && chown :audio /dev/snd/
+test -c /dev/snd/ && chmod 775 /dev/snd/
+test -c /dev/snd/controlC0 && chown :audio /dev/snd/controlC0
+test -c /dev/snd/pcmC0D0p && chown :audio /dev/snd/pcmC0D0p
+test -c /dev/snd/pcmC0D1p && chown :audio /dev/snd/pcmC0D1p
+test -c /dev/snd/pcmC0D2p && chown :audio /dev/snd/pcmC0D2p
+test -c /dev/snd/pcmC0D3p && chown :audio /dev/snd/pcmC0D3p
+test -c /dev/snd/timer && chown :audio /dev/snd/timer
+test -c /dev/snd/pcmC0D0c && chown 0:6508 /dev/snd/pcmC0D0c
+test -c /dev/snd/pcmC0D1c && chown 0:6508 /dev/snd/pcmC0D1c
+test -c /dev/snd/pcmC0D2c && chown 0:6508 /dev/snd/pcmC0D2c
+test -c /dev/snd/pcmC0D3c && chown 0:6508 /dev/snd/pcmC0D3c
+test -c /dev/s3c-mfc && chown 0:6510 /dev/s3c-mfc
+test -c /dev/random && chmod 666 /dev/random
+test -c /dev/urandom && chmod 666 /dev/urandom
+test -c /dev/fb0 && chown :video /dev/fb0
+test -c /dev/video1 && chown :video /dev/video1
+test -c /dev/video2 && chown :video /dev/video2
+test -c /dev/radio0 && chown :6512 /dev/radio0
+chown :6702 /sys/class/backlight/*/brightness
+chmod 664 /sys/class/backlight/*/brightness
+
+ln -sf /dev/rtc0 /dev/rtc1
+
+# Modem power on
+if [ ! -f /opt/etc/.hib_capturing ]; then
+ echo -e "[${_Y}modem power on${C_}]"
+ echo on > /sys/devices/platform/modemctl/exec_util
+else
+ echo "dont execute util in fastboot..."
+fi
+
+#touch sensor start
+echo 1 > /sys/class/i2c-adapter/i2c-2/2-004a/touchstart
+
+echo -e "[${_G}run profile${C_}]"
+# Run profile
+. /etc/profile
+
+if [ -e /opt/etc/.debugmode ]; then
+ echo "debug mode enabled"
+ # for bluescreen
+ export LD_PRELOAD=/usr/lib/libsys-assert.so
+ # enable coredump
+ echo "/opt/bs/core/core.%p" > /proc/sys/kernel/core_pattern
+ ulimit -c unlimited
+else
+ echo "debug mode disabled"
+fi
+
+# Check rw mode
+DEVEL_UPDATE_MODE=`grep devel_update_boot /proc/cmdline`
+if [ -f /opt/etc/.devel_update ] && [ -z "$DEVEL_UPDATE_MODE" ]; then
+ touch /opt/etc/.hib_capturing
+ rm /opt/etc/.devel_update
+fi
+
+ # force to use x11 engine for now, since gl random segfault
+ export LAUNCHER_ENGINE=x11
+
+ # Run all rc3 scripts
+ echo -e "[${_G}run all rc3 scripts${C_}]"
+ echo "normal boot"
+ for i in /etc/rc.d/rc3.d/*; do
+ echo -e "[${_G}${i} start${C_}]"
+ $i start
+ done
+
+ echo -e "[${_G}set cpufreq governor${C_}]"
+ # Set default cpufreq governor
+ echo slp > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+ if [ $? -ne 0 ];then
+ echo -e "\t[${_Y}slp not exits, set default ondemand${C_}]"
+ echo ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+ fi
+
+# symbolic link
+if [ ! -e /opt/apps ]; then
+ echo -e "[${_G}link /opt/apps -> /mnt/ums/apps${C_}]"
+ ln -s /mnt/ums/apps /opt/apps
+fi
+
+
+/etc/rc.d/rc.emul
--- /dev/null
+Summary: The inittab file and the /etc/init.d scripts
+Name: system-plugin-ia-generic
+Version: 0.0.10
+License: TO BE FILLED IN
+Group: System/Base
+Release: 1
+Source: %{name}-%{version}.tar.bz2
+# >> gbp-patch-tags # auto-added by gbp
+# << gbp-patch-tags # auto-added by gbp
+Requires: udev
+ExclusiveArch: %ix86 x86_64
+Requires: sysvinit
+Requires: sysvinit-utils
+
+
+%description
+Startup files
+
+%prep
+%setup -q
+# >> gbp-apply-patches # auto-added by gbp
+# << gbp-apply-patches # auto-added by gbp
+
+%build
+
+%install
+cp -a etc %{buildroot}
+
+
+
+
+%files
+/etc/fstab
+%config(noreplace) /etc/inittab
+%exclude %config(noreplace) /etc/mtools.conf
+/etc/profile.d/system.sh
+/etc/rc.d/rc.entersleep
+/etc/rc.d/rc.firstboot
+/etc/rc.d/rc.leavesleep
+/etc/rc.d/rc.shutdown
+/etc/rc.d/rc.sysinit
+/etc/rc.d/rc.*
projects / adaptation / system-plugin-ia-generic.git / commitdiff