Seung-Woo Kim [Fri, 18 Aug 2023 06:34:10 +0000 (15:34 +0900)]
usb: cdns3-starfive: Add extcon usb gadget state with always connected
Add extcon usb gadget state and set usb gadget state as connected.
The cdns3-starfive usb c port in visionfive2 board only has usb
d-/d+ lines and vbus and ground lines are used for power supply.
Because of the H/W limitation, it is not possible to detect usb
c port connected state.
In Tizen, deviced configures usb gadget functions only with the
usb connected state, so, to support usb gadget functionality,
the usb state should be set.
Change-Id: I3e3a25a726c7205b3d9a5fd96d8557562bfda81f
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Jaehoon Chung [Fri, 18 Aug 2023 04:31:42 +0000 (13:31 +0900)]
RISCV: configs: Change a default cpufreq governor to SCHEDUTIL
Change a default cpufreq governor from ondemand to schedutil.
Change-Id: I4d681ddbb0926e40fee8433f5f2924478c56fd0e
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 18 Aug 2023 04:19:55 +0000 (13:19 +0900)]
clk: starfive: jh7110-sys: Set PLL0 rate to 1.5GHz
Set PLL0 rate to 1.5GHz. Change the parent of cpu_root clock
and the divider of cpu_core before setting.
This patch is taken from patch that was posted on mailing.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Change-Id: Ib418a6321555c045effcb0580e0c91d80a7a2043
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Hoegeun Kwon [Wed, 9 Aug 2023 02:17:00 +0000 (11:17 +0900)]
RISCV: dts: starfive: Increase CMA range from 512MB to 768MB
In UHD resolution, there are many cases where alloc fail due to lack
of CMA capacity. Increase CMA range to prevent cma_alloc failed.
Change-Id: I6b0c355b773b08d09381e738329b986113982768
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Jaehoon Chung [Tue, 8 Aug 2023 05:18:43 +0000 (14:18 +0900)]
RISCV: dts: starfive: Fix the property of memory
Current is getting the memory size from devicetree node.
Until supporting eeprom, it needs to use the memory node.
After applied this patch, Visionfive2 is showing 8GiB.
Change-Id: Ic96c2a7d373b9fccee830f3e34bbd9a2d6a3d6c3
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Seung-Woo Kim [Thu, 3 Aug 2023 02:00:55 +0000 (11:00 +0900)]
RISCV: config: Enable MEDIA_SUPPORT_FILTER and enable only usb camera configs
Enable MEDIA_SUPPORT_FILTER to filter out unnecessary media
configs and enable only usb camera configs including gspca module.
Change-Id: Idcd217d10821467562a53a57c3783897b4363d5f
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Łukasz Stelmach [Tue, 1 Aug 2023 13:03:49 +0000 (15:03 +0200)]
RISCV: config: Enable RAM and NBD block devices
Devices are supported on VisionFive2. Enable them on QEMU to use the
same boot procedures on both targets.
Change-Id: I210141b471d718fec4286a7bb516751226756f96
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Hoegeun Kwon [Tue, 1 Aug 2023 02:30:40 +0000 (11:30 +0900)]
drm/verisilicon: vs_dc: Fix to disable interrupt on probe
There is a case where interrupt enable is set in decon req before
decon probe is completed. There is a problem that a kernel panic
occurs if an interrupt is executed before the decon is bound. Disable
interrupts before registering interrupts. Also, irq generated when the
interrupt state is disabled is ignored.
Change-Id: I8b3571b006031c28349e1647f2d9a5c508ca6235
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Wed, 26 Jul 2023 11:32:55 +0000 (20:32 +0900)]
soc: sifive: ccache: Add delay after flush
Problems with cache flush at resolutions exceeding FUD and with inno
hdmi driver. It runs a cache flush and requires a delay. So add delay
after cache flush.
Change-Id: Id8b1398dcce04851577912e6c1dfd4a2b580a043
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Jaehoon Chung [Wed, 26 Jul 2023 01:50:50 +0000 (10:50 +0900)]
gpu: drm: verisilicon: Fix potential Null pointer dereference
It can be the poential NULL pointer dereference.
[ 3.749753] Unable to handle kernel NULL pointer dereference at virtual address
0000000000000008
[ 3.750873] starfive display-subsystem: bound
29400000.dc8200 (ops 0xffffffff812c3bc8)
[ 3.758534] Oops [#1]
[ 3.758538] Modules linked in:
[ 3.758547] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.39-riscv-visionfive2 #1
[ 3.758555] Hardware name: StarFive VisionFive 2 v1.3B (DT)
[ 3.758560] epc : dc_isr+0x22/0x60
[ 3.766483] innohdmi-starfive
29590000.hdmi: inno hdmi bind begin
[ 3.768725] ra : dc_isr+0x22/0x60
[ 3.768734] epc :
ffffffff806db7ee ra :
ffffffff806db7ee sp :
ffffffff81a03bf0
[ 3.768741] gp :
ffffffff81c6a158 tp :
ffffffff81a17900 t0 :
0000000000046000
[ 3.771834] innohdmi-starfive
29590000.hdmi: supply hdmi_1p8 not found, using dummy regulator
Change-Id: I4a7c1f656f1d45c2fc183f2c2976a11e0b2816c1
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Tue, 25 Jul 2023 21:32:45 +0000 (06:32 +0900)]
Revert "riscv: fix riscv64 unrecognized opcode build error"
Since using gcc13 to build Tizen RISCV, this patch doesn't need anymore.
This reverts commit
e6c19c8fe08eb4375c7f5da1d7004ae4c533d615.
Change-Id: Iea9421a0c53ac3f9a9d9a8942dbf5a1521b91665
Jaehoon Chung [Mon, 26 Jun 2023 04:15:12 +0000 (13:15 +0900)]
packaging: Update stable version to 6.1.39
Update stable version to 6.1.39.
Change-Id: I0092fc745e6e968afa777d0fb409fc1f20d5e840
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Tue, 18 Jul 2023 21:58:59 +0000 (06:58 +0900)]
build: Change module image size from 32M to 20M
Change module image size from 32M to 20M.
In ks file, partitions size is using to 20M. If created to 30M, it will
be failed on build system.
So to check correct size, change module image size to 20M.
Change-Id: I89cb828269e15f2162febacaf2f22386849b0f22
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Hoegeun Kwon [Mon, 17 Jul 2023 07:38:34 +0000 (16:38 +0900)]
drm/verisilicon: Add cache flush feature when dmabuf sync
Add cache flush for gem memory. Cache flushing is done when the
dmabuf sync ioctl is called.
Change-Id: I8663a391b18bb10f69007bd631fec492c0e347b2
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Mon, 17 Jul 2023 09:06:27 +0000 (18:06 +0900)]
gpu: drm: img: Fix to check fence list instead of fence count
In order to generate a reserve fences, we check to see if there is a
fence list instead of fence count.
Change-Id: Ibd45c154610221dd7bcd4de96570fc00066457c8
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Thu, 13 Jul 2023 09:49:56 +0000 (18:49 +0900)]
RISCV: config: Enable img gpu config
Enable Imagination PoerVR GPU driver defconfig.
Change-Id: If8e8b51fe59a367a0981f65b5cc7b3f44f9a8782
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Fri, 7 Jul 2023 02:16:18 +0000 (11:16 +0900)]
gpu: drm: img: Fix to use iterator instead of list
Change the dma fence management method from list to iterator method.
Also the fences have to added individually on each other driver. So
dma_resv_add_fence does not add a fence, but dma_resv_reserve_fences
is used to add it.
Change-Id: I4c87608b9878e218fe0ae5cc5acb564c1f9d5db9
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Fri, 7 Jul 2023 04:13:14 +0000 (13:13 +0900)]
gpu: drm: img: Fix to use jh71xx_pmu header
Fix to use jh71xx_pmu header and sifive_flush64_range.
Change-Id: I9ad7d5f3de347be0f26ceb4633b0125d2a6480ef
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Fri, 7 Jul 2023 04:11:35 +0000 (13:11 +0900)]
soc: starfive: Add feature for hw event masks
Add hw event masks off feature for use with other drives.
Change-Id: I5b8862cd50b35f0b8ceed770d95a5c17bde8b12c
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Walker Chen <walker.chen@linux.starfivetech.com>
Hoegeun Kwon [Tue, 4 Jul 2023 08:38:52 +0000 (17:38 +0900)]
gpu: drm: img: Fix PVRSRV device initialization time
If the initialization time is a probe, the problem of not loading the
firmware occurs. Fix the initialization time to open time.
Change-Id: I1372230fdbe754845146eacd7bbb7b4e248c2c4f
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
shanlong.li [Wed, 5 Jul 2023 02:25:22 +0000 (11:25 +0900)]
drm/GPU: Add support Imagination PowerVR GPU driver v1.17
Add support Imagination PowerVR GPU driver with starfive JH7110. This
driver is from [1], and the imported patch list[2]. We modified
driver compatible and clock in the device-tree to fix kernel v6.1.
[1] https://github.com/starfive-tech/linux
[2] patch list from v5.15.y
b9049f928d30 gpu: drm: img: disable PDUMP
092482e4811e driver:GPU: adjust interface sequence 1. add axi disable interface 2. adjust the interface order between clk and
b320e5501342 gpu:driver: fix up hibernation resume problem
0dea95655224 driver:gpu: add gpu runtime pm
0381e221bc0d driver:gpu: gpu driver change to release
6ccc2d8209d9 driver:GPU:set the gpu frequency to 594Mhz
d81e5fcbcccc driver:gpu: gpu driver upgrade to 1.17
18a68c90c061 Add Wayland with GPU support.
e4d3672cccbe driver:GPU: use pm runtime interface
4c34123a3d81 driver:GPU: Using the GPU driver release version
1ed4d6d30d92 driver:GPU: Disable apm to resolve pvrdebug -dd suspension error
13e336d5b5ae driver:GPU: adjust ClockSpeed to 409.6MHz
c2a828350549 driver:GPU: fix compile warnings
2ba6ee6d00df driver:GPU: add gpu driver
Signed-off-by: shanlong.li <shanlong.li@starfivetech.com>
Change-Id: I8ac4ba0038e8ba48c48d615f8700c49c7ff706b9
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Jaehoon Chung [Wed, 12 Jul 2023 02:08:29 +0000 (11:08 +0900)]
RISCV: dts: starfive: Change wr/rd_osr_lmt value from 4 to 0xf
Change wr/rd_osr_lmt value from 4 to 0xf.
When value is using to 4, ethernet Rx Performance is decreasing.
Vendor kernel(v5.15) is using its value as 0xf.
The below is iperf result.
- Using to 4 - Rx is 45MBits/sec, Tx is 980MBits/sec
- Using to 0xf - Rx is 750MBits/sec, Tx is 930Mbits/sec
Change-Id: Ie6763a00ec2795e43bdbae2f224638732c789490
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Tue, 11 Jul 2023 07:08:42 +0000 (16:08 +0900)]
RISCV: dts: starfive: Add driver-strength relevant to motorcomm
Add driver-strength relevant to motrcomm phy driver.
This patch is based on the below commit.
https://github.com/SaminGuo/linux/commit/
ebd75b0007b235a4a9dc9163d08820b4b9fdfc9f
Change-Id: I0bcbea398019671ef550c053171826bb4978849d
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Samin Guo [Tue, 25 Apr 2023 10:43:29 +0000 (18:43 +0800)]
net: phy: motorcomm: Add pad drive strength cfg support
The motorcomm phy (YT8531) supports the ability to adjust the drive
strength of the rx_clk/rx_data, and the default strength may not be
suitable for all boards. So add configurable options to better match
the boards.(e.g. StarFive VisionFive 2)
Original commit: https://github.com/SaminGuo/linux/commit/
3732faf2239b77478022246b9ac62902ec30c2c6
Change-Id: Ic805273b769f3ee47eab4aec1c16c6633d466ac8
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Hoegeun Kwon [Tue, 11 Jul 2023 06:51:37 +0000 (15:51 +0900)]
soc: sifive: ccache: Fix to use soc starfive jh7110 addr
Fix to use jh7110 address when using jh110 soc.
Change-Id: Id282ec6f67b73336f89118f4e3446e953a27f270
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Jaehoon Chung [Thu, 6 Jul 2023 06:24:59 +0000 (15:24 +0900)]
sound: soc: ac108: Remove unused function and fix fallthrough warning
Fix the unused-function and implicit-fallthrough warning.
Change-Id: I84b7203c3ca864ecb89c562058037dd0630e5c25
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Hoegeun Kwon [Tue, 4 Jul 2023 08:34:52 +0000 (17:34 +0900)]
Bluetooth: Fix build warning
Occur build warning for unused variable, Fix warning
net/bluetooth/hci_event.c: In function ‘process_adv_report’:
net/bluetooth/hci_event.c:6470:7: warning: unused variable ‘match’ [-Wunused-variable]
bool match;
^~~~~
net/bluetooth/hci_event.c:6469:26: warning: unused variable ‘d’ [-Wunused-variable]
struct discovery_state *d = &hdev->discovery;
Change-Id: I5c6778aea827e6d138009541991409834ea9cc07
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Jaehoon Chung [Mon, 3 Jul 2023 05:32:15 +0000 (14:32 +0900)]
packaging: Update build required openssl version from 1.1 to 3
Openssl 1.1.1 is supported until September 2023, so Tizen 8.0 upgrades
Openssl 3.0.x. To meet this, change build required openssl version. Also
required with pkgconfig.
Change-Id: Ia66aa62a7ddb6517b83d89d4b87fe6cebb452e46
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Khem Raj [Mon, 23 Jan 2023 21:04:10 +0000 (13:04 -0800)]
perf cpumap: Make counter as unsigned ints
These are loop counters which is inherently unsigned. Therefore make
them unsigned. Moreover it also fixes alloc-size-larger-than
error with gcc-13, where malloc can be called with (-1) due to tmp_len
being an int type.
Fixes
| cpumap.c:366:20: error: argument 1 range [
18446744065119617024,
18446744073709551612] exceeds maximum object size
9223372036854775807 [-Werror=alloc-size-larger-than=]
| 366 | tmp_cpus = malloc(tmp_len * sizeof(struct perf_cpu));
| | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Upstream-Status: Submitted [https://lore.kernel.org/linux-perf-users/
20230123211310.127532-1-raj.khem@gmail.com/T/#u]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Change-Id: I7ecc661339efd49179dd4c1823f4969cee0b0515
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Mon, 26 Jun 2023 03:48:44 +0000 (12:48 +0900)]
pwm: pwm-starfive-ptc: Fix imcompatible poiter type
The get_state of pwm_ops is 'int' type, but starfive_pwm_ptc_get_state
function is 'void' type.
It needs to fix correct pointer type.
Change-Id: I8560bb1c0d9571fc0d4e66aa593d257e474f033f
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Keith Zhao [Wed, 21 Jun 2023 08:23:10 +0000 (17:23 +0900)]
drm/verisilicon: Add Innosilicon HDMI driver
Add support Innosilicon HDMI driver of starfive JH7110. This driver is
from [1]. We modified to select and use stable inno_hdmi driver or
mainline posted hdmi driver.
[1] https://github.com/starfive-tech/linux
Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
Change-Id: I5c72e2d9fe7cc9f231926f624f459547d73e0f1e
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Wed, 21 Jun 2023 05:59:01 +0000 (14:59 +0900)]
drm/verisilicon: hdmi: Add feature to check cea mode
There is a problem with output for modes that are not supported, and
due to this, the hdmi sound is not played. Add feature to check cea
mode.
Change-Id: I55e3daa4e6e98f6df26bf91de84c099077e7f339
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Tue, 20 Jun 2023 10:10:44 +0000 (19:10 +0900)]
ASoC: SOC: Fix fmt with dai naming
Kernel v6.y does not support the legacy_dai_naming format, so there is
a problem that i2s does not work due to dai_name. Fix that issue.
Change-Id: I9aae5c683b4b5d803c12959ca2994e8cc3e6c577
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Tue, 20 Jun 2023 07:54:22 +0000 (16:54 +0900)]
RISCV: dts: starfive: Add hdmi audio snd card
Add HDMI audio snd-card, The snd-card1 is use i2s and hdmi.
Change-Id: I64102445ffad0a072d5d8f62a886bbc9945fd1f1
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Wed, 21 Jun 2023 06:47:35 +0000 (15:47 +0900)]
drm/verisilicon: hdmi: Add audio_init feature
Add hdmi_audio_init to use audio in hdmi driver.
Change-Id: If878ee4ee4a1665d91a34ef4f5c5f6d2ab60840e
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Xingyu Wu [Mon, 19 Jun 2023 08:57:37 +0000 (17:57 +0900)]
drm/verisilicon: hdmi: Add support audio hdmi driver
Add support hdmi audio driver of starfive JH7110. This driver is from
[1], and the imported patch list[2]. We modified to use struct
starfive_hmdi instead of struct inno_hdmi also added to use
legacy_dai_naming.
[1] https://github.com/starfive-tech/linux
[2] patch list from v5.15.y
5bec3220a8be drm:verisilicon:hdmi-audio:Adjust when to configure registers
5a302a7a25fe gpu:drm:Add audio function in inno hdmi
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Change-Id: Iae0ec57f2cf588c7ca177f7e284968ca9e68c674
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Wed, 14 Jun 2023 08:06:14 +0000 (17:06 +0900)]
drm/verisilicon: hdmi: Fix to timming for hdmi_setup
When changing the mode, a problem occurs because we try to write a
value to reg in a state that is not resumed after suspend. Move the
timing of writing values to reg to enable.
Change-Id: I49db485e947c164129b1412cdff2a16d6306895e
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Tue, 13 Jun 2023 10:40:25 +0000 (19:40 +0900)]
RISCV: config: Enable sifive flush config
Enable SIFIVE_CCACHE and SIFIVE_FLUSH configuration.
Change-Id: I008c302e89896a0ea14f065365526e4b490b5af2
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Tue, 13 Jun 2023 10:39:30 +0000 (19:39 +0900)]
drm/verisilicon: Add starfive_flush_dcache
There is a problem that the garbage cache value comes out when the
screen is displayed. Flush the cache by adding the flush feature.
The feature referred to v5.15 kernel.
Change-Id: I183eb0c1640c17b5ac27dcb1ce82555a5c651571
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Thu, 8 Jun 2023 11:26:29 +0000 (20:26 +0900)]
soc: sifive: ccache: Add flush feature
Add the ccache flush feature applied to kernel v5.15.
This feature flushes the garbage cache when output the screen.
Change-Id: I855fd37416f028f6d7c9b9e1459462e4da7e1740
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Tue, 13 Jun 2023 07:41:20 +0000 (16:41 +0900)]
RISCV: config: Enable starfive drm and hdmi config
Enable DRM_VERISILICON and STARFIVE_HDMI configuration.
Change-Id: If26c6c98b84d3e9cddbc6b696e8332882b9f3b31
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Tue, 13 Jun 2023 07:38:32 +0000 (16:38 +0900)]
drm/verisilicon: Fix to build error for drm hdmi
Modify for the 6.1 kernel interface.
Change-Id: I24b652c2c1ab102649586c3cdb6eca63256dc3ce
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Keith Zhao [Tue, 13 Jun 2023 06:19:56 +0000 (15:19 +0900)]
drm/verisilicon: Add starfive hdmi driver
Add HDMI dirver for StarFive SoC JH7110.
Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
[cherry-pick : https://patchwork.kernel.org/project/linux-riscv/cover/
20230602074043.33872-1-keith.zhao@starfivetech.com/]
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Change-Id: I328dcf0c0adf7bc2817675278034d6a2520a536b
Keith Zhao [Tue, 13 Jun 2023 04:54:30 +0000 (13:54 +0900)]
drm/verisilicon: Add verisilicon dc controller driver
Add DC8200 display controller driver for StarFive JH7110 SoC.
Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
[cherry-pick : https://patchwork.kernel.org/project/linux-riscv/cover/
20230602074043.33872-1-keith.zhao@starfivetech.com/]
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Change-Id: I6efc987c092249e1eff2cd5a12cd32c4ed83056c
Keith Zhao [Tue, 13 Jun 2023 04:45:44 +0000 (13:45 +0900)]
drm/verisilicon: Add drm plane funcs
Implement plane functions for the DRM driver.
Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
[cherry-pick : https://patchwork.kernel.org/project/linux-riscv/cover/
20230602074043.33872-1-keith.zhao@starfivetech.com/]
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Change-Id: I0b0680590b3f301afc316565c7321015d2177745
Keith Zhao [Tue, 13 Jun 2023 04:44:19 +0000 (13:44 +0900)]
idrm/verisilicon: Add drm crtc funcs
Add crtc driver which implements crtc related operation functions.
Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
[cherry-pick : https://patchwork.kernel.org/project/linux-riscv/cover/
20230602074043.33872-1-keith.zhao@starfivetech.com/]
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Change-Id: I63d0234a3ac985f7f7c74c0dc3b679add2c12759
Keith Zhao [Tue, 13 Jun 2023 04:42:33 +0000 (13:42 +0900)]
drm/verisilicon: Add mode config funcs
Add mode setting functions for JH7110 SoC.
Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
[cherry-pick : https://patchwork.kernel.org/project/linux-riscv/cover/
20230602074043.33872-1-keith.zhao@starfivetech.com/]
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Change-Id: I42ab5eaf511a339a9e13e47e395ea47eb1f3c0fd
Keith Zhao [Tue, 13 Jun 2023 04:40:16 +0000 (13:40 +0900)]
drm/verisilicon: Add gem driver for JH7110 SoC
This patch implements gem related APIs for JH7100 SoC.
Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
[cherry-pick : https://patchwork.kernel.org/project/linux-riscv/cover/
20230602074043.33872-1-keith.zhao@starfivetech.com/]
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Change-Id: Ic2a60aacc4fc1d7aa83cb663fe689053e5dd0040
Keith Zhao [Tue, 13 Jun 2023 04:33:50 +0000 (13:33 +0900)]
drm/verisilicon: Add basic drm driver
Add a basic platform driver of the DRM driver for JH7110 SoC.
Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
[cherry-pick : https://patchwork.kernel.org/project/linux-riscv/cover/
20230602074043.33872-1-keith.zhao@starfivetech.com/]
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Change-Id: I58d5b12467e87355175f24ed02ff5c675df7e7d8
Keith Zhao [Tue, 13 Jun 2023 04:28:34 +0000 (13:28 +0900)]
riscv: dts: starfive: jh7110: add dc&hdmi controller node
Add the dc controller and hdmi node for the Starfive JH7110 SoC.
Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
[cherry-pick : https://patchwork.kernel.org/project/linux-riscv/cover/
20230602074043.33872-1-keith.zhao@starfivetech.com/]
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Change-Id: I66e234aaa823baee37f211b36b661716ff8af483
Keith Zhao [Tue, 13 Jun 2023 04:21:44 +0000 (13:21 +0900)]
dt-bindings: display: Add yamls for JH7110 display subsystem
Add bindings for JH7110 display subsystem which
has a display controller verisilicon dc8200
and an HDMI interface.
Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
[cherry-pick : https://patchwork.kernel.org/project/linux-riscv/cover/
20230602074043.33872-1-keith.zhao@starfivetech.com/]
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Change-Id: Icb7b9d267d6e8545556acf92a1adf84d3ad2e248
Seung-Woo Kim [Fri, 16 Jun 2023 01:54:18 +0000 (10:54 +0900)]
packaging: Setup with source0 name
In packaging spec, source0 name is different from package name,
so setup also needs to be with source0 name explictly. Do setup
with source0 name.
Change-Id: I3400c7aa131ec2561745386f903de2e47fd9aab7
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Anuj Jain [Fri, 6 Jan 2023 09:59:24 +0000 (15:29 +0530)]
Bluetooth: Add LE connection parameter update
Add support for BT_LE_CONN_PARAM in l2cap socket.
Change-Id: I2ed693da26ba2d3464b9997bf1880c6c136055cd
Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Hoegeun Kwon [Fri, 14 Oct 2022 07:02:19 +0000 (16:02 +0900)]
Bluetooth : fix build error
Update device name on remote_name_event, Fix interface define for
build error.
Change-Id: I59df4a7e30f9a83a0efdce516b2a325cb3b0983b
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
DoHyun Pyun [Thu, 4 Jul 2019 00:18:21 +0000 (09:18 +0900)]
Bluetooth: Fix the potential crash issue
There is a logic error in the event function. We should
check the callback function's parameter before calling.
Change-Id: I06a4a8c50317e5ec4ae8fe35e4b788105e090196
Fixes:
bde01c80dd51 ("Bluetooth: Set le data length command and event")
Signed-off-by: DoHyun Pyun <dh79.pyun@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Fri, 16 Sep 2016 10:07:22 +0000 (15:37 +0530)]
Bluetooth: Set le data length command and event
Sets the data length for the le data packet with in the
advised limits. MGMT command and event are added to handle
the setting of data length.
Change-Id: Ia5c2167743cc9a29190e5631973e9d52d41caa1d
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Fri, 16 Sep 2016 07:24:31 +0000 (12:54 +0530)]
Bluetooth: Read host suggested default le data length
This patch adds MGMT command and code for supporting reading
default le data length value set at the controller.
Change-Id: I2b81982dc26ed5af4a8f8a3d3913db5d64625260
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Fri, 16 Sep 2016 06:39:57 +0000 (12:09 +0530)]
Bluetooth: Write host suggested default le data length
This patch adds MGMT command and code for supporting write
default le data length command to the controller.
Change-Id: I3d2c8b622b7913a3ed542342e3ba8076c30dc279
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Fri, 16 Sep 2016 05:08:30 +0000 (10:38 +0530)]
Bluetooth: Read LE Max data length command
This patch adds the MGMT command and code to support reading
the maximum data length supported command for LE.
Change-Id: I4dc0041f2070de2ccb6a4164c8823612863c941e
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
h.sandeep [Fri, 16 Sep 2016 09:15:24 +0000 (14:45 +0530)]
Bluetooth: Fix IPSP connection callback event issue.
This patch fixes the IPSP connection callback event issue
between kernel and bluez layer.
Change-Id: Ia4d625aa8a6dbc9da89a7d9f12308af9c90d0594
Signed-off-by: h.sandeep <h.sandeep@samsung.com>
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Thu, 15 Sep 2016 07:23:03 +0000 (12:53 +0530)]
Bluetooth: IPSP Connect/Disconnect apis
This patch adds MGMT code to support IPSP connect and
disconnect apis and handle connection state changed event.
Change-Id: I1c41ec4f38cf9a108e443def3bc23c1b964e2985
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Thu, 15 Sep 2016 04:42:09 +0000 (10:12 +0530)]
Bluetooth: Add support to enable/disable IPSP
This patch supports MGMT commands and code to enable or disable
IPSP 6LowPan features.
Change-Id: Ia866ecfa517c7d7e4320f17d94d80dfeb9261e59
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 10:51:01 +0000 (16:21 +0530)]
Bluetooth: Fix issue in the Set LE privacy function.
This patch fixes not to check the hdev power before setting
LE Privacy.
Change-Id: I344ea13b1d90527e3e7554ec616cdc640b85159c
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Mon, 12 Sep 2016 07:16:44 +0000 (12:46 +0530)]
Bluetooth: Store the key if auth type is P192
This patch allows to store the key after authentication
if auth type is "HCI_LK_AUTH_COMBINATION_P192"
Change-Id: Ie44dbe7dfec361edab61aceaf9b2ca4057b88fa5
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 11:31:39 +0000 (17:01 +0530)]
Bluetooth: Cancel the Sniff timer
This patch adds code to cancel the sniff timer.
Change-Id: I756d3b08acf6462044d1fb204064fe12ce1238c1
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 11:10:50 +0000 (16:40 +0530)]
Bluetooth: Enable sniff mode for incoming connection
Add provision to set the link poilicy to enable sniff mode
for incoming connection.
Change-Id: Ifff9e9f0838f26a6c96d81f4cbaae43429aa231f
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 10:31:23 +0000 (16:01 +0530)]
Bluetooth: Modify fast connectable type.
This patch modifies the fast connectable function
to just set the type.
Change-Id: I0cce96f85d823f9798ae7f147c4e33ce7b18e0e3
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 09:41:28 +0000 (15:11 +0530)]
Bluetooth: Send Authentication Request command on pairing failure
This patch allows to send HCI_OP_AUTH_REQUESTED command
to the remote device if pairing failure happens because
of pin or key missing error.
Change-Id: I9c28394dc06b22fd5fe9e58ac0b7d728c086bde4
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 09:24:54 +0000 (14:54 +0530)]
Bluetooth: Enable inquiry and page scan
This patch enables the inquiry and page scan after ACL
disconnection with one device and if there are no other
devices connected.
Change-Id: Ifb28be7d23f237d35112b2e0739ed55169baacf7
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 07:34:11 +0000 (13:04 +0530)]
Bluetooth: Change authentication requirement.
This patch updates the authentication requirement to general
MITM if local and remote device IO capabilities are not
NO_INPUT_NO_OUTPUT.
Change-Id: Ie3955c3f8287418e74af20d40bdf30d0f1963e31
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 06:54:43 +0000 (12:24 +0530)]
Bluetooth: Set link Supervision timeout for a connection
This patch allows to set the supervision timeout for a connection
if the device role is master.
Change-Id: I7897167ec07803f3059f2ab4d3314b0b7a951533
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 05:51:06 +0000 (11:21 +0530)]
Bluetooth: Set filter policy for LE connection
This patch sets the filter policy to a default value 0x01 during
LE auto connection if the destination address is not set. And it
updates the destination address once the LE connection complete
event is recieved during LE auto connection. And for it checks
valid destination address before cancelling LE connection when
connection timeout occurs.
Change-Id: I9877556c0b0ab4826f5f4934ead4d85b7837036d
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
[squash patches, LE connection policy, set dest address and check dest address before cancelling connection]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Wed, 7 Sep 2016 09:52:08 +0000 (15:22 +0530)]
Bluetooth: Get Advertising TX power
This patch adds MGMT command to read the advertising TX power.
Change-Id: Ide9e5d332f034928d2eae2cbd68a025a0d42be1b
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 07:07:45 +0000 (12:37 +0530)]
Bluetooth: Set the link for SCO connection
This patch sets the link policy for SCO/eSCO connection.
Change-Id: I71caef5a3887f73a10329b6886c8cf52b80e8d37
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
[add link policy setting in sco connection]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Tue, 6 Sep 2016 11:08:36 +0000 (16:38 +0530)]
Bluetooth: Add MGMT command to set SCO settings
Added code to set sco settings.
Change-Id: I37aa572436241b06e00d1e9e75964aac747eeba5
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
[remove sco link policy part]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 05:01:17 +0000 (10:31 +0530)]
Bluetooth: Add multiple LE advertise state change event
This patch adds code for providing multiple LE advertisement state
changed event to upper layer.
Change-Id: I58fb8044e74402376ec30b121081edce7c8709d1
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
[divide hci_vendor_mutli_adv_state_change_evt and remove hci event structure from mgmt]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 04:40:03 +0000 (10:10 +0530)]
Bluetooth: Add LE device found MGMT event
This patch adds new MGMT event for LE device discovery and allows
the handling of all advertisement packets in platform.
Change-Id: I1927acb75eff0b60a5899898c6d7a000e1a108ef
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Seung-Woo Kim [Wed, 28 Sep 2016 16:59:05 +0000 (01:59 +0900)]
Bluetooth: fix vendor ext rssi link alert event
This patch fixes style for rssi link alert event from vendor
specific group ext.
Change-Id: I0e7003e417c5f5a590cce8264caccad515dd3c10
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Wed, 7 Sep 2016 11:17:58 +0000 (16:47 +0530)]
Bluetooth: Add H/W TX timeout error MGMT event
This patch sends the H/W TX timeout error MGMT event if HCI command
timeout occurs after sending HCI commands.
Change-Id: I5eb593f2fe4d31c404dd94ef582790e47d03b10a
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Wed, 7 Sep 2016 10:12:22 +0000 (15:42 +0530)]
Bluetooth: Add hardware error MGMT event
Add code to handle hardware error MGMT event.
Change-Id: I5875ea2aeae7aba95c1f8e15b456704dc6bcdee4
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 05:26:15 +0000 (10:56 +0530)]
Bluetooth: Add LE vendor specific event handler
This patch adds the vendor specific LE meta event handler.
It handles the vendor specific handles like,
LE_MULTI_ADV_STATE_CHANGE_SUB_EVENT, LE_RSSI_LINK_ALERT.
Change-Id: I1f344a31e36f9c7442fe0bd8b598e67d9f5fb9bf
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
[divide hci vendor speicif group event function]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Thu, 25 Aug 2016 07:16:07 +0000 (12:46 +0530)]
Bluetooth: Add set LE scan parameter feature
Added new MGMT command to set LE scan parameters
Change-Id: I5ea660f97e93dfcc72273971ad0250e7f582f718
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Thu, 25 Aug 2016 06:43:09 +0000 (12:13 +0530)]
Bluetooth: Set Manufacturer data feature
Added new MGMT command to set the manufacturer data
in the BR/EDR packet.
Change-Id: Ie08062f4cad0c676deab94fd95fdc1a8c5602135
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Thu, 25 Aug 2016 06:28:22 +0000 (11:58 +0530)]
Bluetooth: Add LE connection parameter update procedure
Added new MGMT command to update LE connection parameters
Change-Id: I6ae16513437cd42d40e75958aa8415baa1cbedbb
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Thu, 25 Aug 2016 06:11:34 +0000 (11:41 +0530)]
Bluetooth: Add stop LE auto connection feature
Added new MGMT command to disable LE auto connection.
Change-Id: I1f5f61b83227501ad54019008b405fd47fd722a3
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Thu, 25 Aug 2016 05:53:02 +0000 (11:23 +0530)]
Bluetooth: Add BT LE discovery feature
This patch adds new MGMT commands to start LE discovery separately
and handles LE discovery state.
Change-Id: I85958b8c2b5c7e28f57c69e86037ab1e61a75db0
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Thu, 25 Aug 2016 04:47:19 +0000 (10:17 +0530)]
Bluetooth: Update device name on remote_name_event
This patch updates the device name on receiving the HCI event
remote_name_event during connection establishment.
Change-Id: I9a217e6760b1803a70af201a3f6903e722079749
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Wed, 24 Aug 2016 11:51:15 +0000 (17:21 +0530)]
Bluetooth: Add RSSI Monitor feature
Added feature support for monitoring the RSSI value.
Commands and events for enabling, disabling and setting
rssi threshold values are added.
Change-Id: I850643a9228afc017e54217a11826b9c6a68a96b
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Wed, 24 Aug 2016 09:32:56 +0000 (15:02 +0530)]
Bluetooth: Functions to modify WhiteList
This patch provides MGMT commands to manage the white
list which includes, adding, removing and clearing the
devices from white list.
Change-Id: If71107129d3a090ae81448a8122b76accd4f5522
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: DoHyun Pyun <dh79.pyun@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Wed, 24 Aug 2016 06:47:16 +0000 (12:17 +0530)]
Bluetooth: Add Advertising Packet Configuration
This patch provides new MGMT commands to configure
the advertising data and scan response data packets for
LE peripheral devices.
Change-Id: I914d13795f4fb58e5f2e1cadb55086f4bcbc82df
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: DoHyun Pyun <dh79.pyun@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
[jhoon20.kim: adjust some codes to apply it in 5.4 kernel]
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
h.sandeep [Thu, 1 Sep 2016 06:30:57 +0000 (12:00 +0530)]
Bluetooth: Add MGMT tizen_handlers and TIZEN_OP_BASE_CODE.
Added the basic skeleton code for tizen_mgmt_handlers and
mgmt_tizen.h header file.
Change-Id: I8f3100aa79e6673840ba561f0a9c50238ca0880b
Signed-off-by: h.sandeep <h.sandeep@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Sudha Bheemanna [Tue, 23 Aug 2016 11:37:10 +0000 (17:07 +0530)]
Bluetooth: Add "TIZEN_BT" flag
Added the tizen specific flag for use in adding tizen patches.
Change-Id: Ia391644fddbe600c8d845e0bf0808f587aa73e0c
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: DoHyun Pyun <dh79.pyun@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>
Jaehoon Chung [Mon, 12 Jun 2023 03:11:17 +0000 (12:11 +0900)]
RISCV: configs: Enable configurations relevant to network
Enable configurations relevant to network stack.
It's referred to tizen-kernel-config.
Change-Id: Ice536221113ab67c45cb01be14dc38f0e76345c4
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Hoegeun Kwon [Fri, 9 Jun 2023 07:25:00 +0000 (16:25 +0900)]
RISCV: config: Enable INPUT_EDEV config
Enable INPUT_EDEV configuration.
Change-Id: I4dee6d72f2fac9aa3c4fc229df9a207e24a9fff4
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Fri, 9 Jun 2023 07:49:03 +0000 (16:49 +0900)]
RISCV: config: Disable APPARMOR and SELINUX for security
Disable SECURITY_SELINUX SECURITY_APPARMOR configuration. and chhange
LSM order.
Change-Id: I19dfa9811c4427bef6ee4336c0a8fd956c817b4e
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Jaehoon Chung [Fri, 9 Jun 2023 03:52:28 +0000 (12:52 +0900)]
RISCV: configs: tien_visionfive2: Enable RTL8XXXU config as module
Enable RTL8XXXU configuration as module.
And Other realtek drivers is enabled to use if someone wants to use
them.
Change-Id: I9ff25360d2d17bc315db7e09f9958e170ab1691d
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Thu, 8 Jun 2023 10:51:39 +0000 (19:51 +0900)]
packaging: Remove variant from Source file name
Remove varianet from Source file name.
During build, it's faield with below log.
(It's same on build system.)
[ 9s] error: File /home/abuild/rpmbuild/SOURCES/riscv-visionfive2-linux-kernel-6.1.21.tar.xz: No such file or directory
Change-Id: I635d0e34bb73e02c910cd99c1db1a4af8b893fbc
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Wed, 7 Jun 2023 08:58:54 +0000 (17:58 +0900)]
RISCV: config: Enable INPUT_UINPUT config
Enable INPUT_UINPUT configuration.
Change-Id: Ie72a5072abd1202f4fb0611a8ebbbe2eda847699
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Wed, 7 Jun 2023 05:13:01 +0000 (14:13 +0900)]
RISCV: dts: starfive: use the aliases about mmc
The index of mmc is assigned according to probing sequence.
It means that index can be changed every booting time.
To prevent the wrong index, use the aliases as fixed index.
- eMMC : mmc0
- SD : mmc1
Change-Id: Ie0abe1b01be55decf8be7cb9ae553a421240e422
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Łukasz Stelmach [Tue, 23 May 2023 10:11:52 +0000 (12:11 +0200)]
Build packages for different platforms
Build separate packages for QEMU and VisionFive2 platforms
Change-Id: I0a44f7065f284bc40cde907238a2591836534251
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
projects / platform / kernel / linux-starfive.git / log