Lukasz Majewski [Mon, 1 Apr 2019 14:00:03 +0000 (16:00 +0200)]
cosmetic: config: Remove empty #ifdefs
After running tools/moveconfig.py it turned out that for various boards
there are an empty #ifdef statements.
Remove them to clean u-boot source code.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Fabio Estevam [Wed, 13 Mar 2019 18:02:58 +0000 (15:02 -0300)]
imx8mq_evk: README: Make the underline marker fill the whole sentence
Let the underline marker "=" fill the whole sentence for better
readability.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Fabio Estevam [Wed, 13 Mar 2019 18:02:57 +0000 (15:02 -0300)]
imx8mq_evk: README: Fix a typo in the destination path
The DDR firmware binaries should be copied to '$(srctree)', so fix
a typo.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Fabio Estevam [Wed, 13 Mar 2019 18:02:56 +0000 (15:02 -0300)]
imx8mq_evk: README: Need to copy bl31.bin to U-Boot source tree
After building ATF it is needed to copy the generated bl31.bin file to
the U-Boot source tree.
Make this step explicit in the instructions.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Baruch Siach [Wed, 2 Jan 2019 06:58:28 +0000 (08:58 +0200)]
tools/imx8m_image.sh: remove bashism
Use a single '=' to test string equality for compatibility with non-bash
shells. Otherwise, if /bin/sh is dash, build fails:
./tools/imx8m_image.sh: 15: [: signed_hdmi_imx8m.bin: unexpected operator
./tools/imx8m_image.sh: 15: [: signed_hdmi_imx8m.bin: unexpected operator
./tools/imx8m_image.sh: 15: [: spl/u-boot-spl-ddr.bin: unexpected operator
./tools/imx8m_image.sh: 15: [: spl/u-boot-spl-ddr.bin: unexpected operator
WARNING './spl/u-boot-spl-ddr.bin' not found, resulting binary is not-functional
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Tested-by: Chris Spencer <christopher.spencer@sea.co.uk>
Fabio Estevam [Wed, 27 Mar 2019 23:03:39 +0000 (20:03 -0300)]
pico-imx7d: README: Recommend the usage of a USB hub
Since commit
9e3c0174da842 ("pico-imx7d: Add LCD support") we started to
notice some hangs in U-Boot.
There is not an issue on such commit per se, but due to the LCD support
the current drawn is increased and this may cause issues when powering
pico-imx7d-pi from USB.
Some computers may be a bit strict with USB current draw and will
shut down their ports if the draw is too high.
The solution for that is to use an externally powered USB hub between the
board and the host computer.
Add such recommendation to the README file.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Jagan Teki [Thu, 21 Mar 2019 08:35:53 +0000 (14:05 +0530)]
configs: icorem6: Use imx6 cratch register for bootcount
SRAM address used for bootcount on exiting code is erasing
previous count value when system reset from Linux. So use
the dedicated imx6 scratch register, GPR2 to preserve the
contents even if the system reset from Linux.
Fixes:
4eb9aa39350e ("configs: imx6qdl_icore_mmc: Enable watchdog and bootcounter")
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Michael Trimarchi [Fri, 8 Mar 2019 07:35:03 +0000 (13:05 +0530)]
configs: icore: Fix U-Boot proper loading from nand
SPL on Engicam i.Core M6 boards enabled DM, so it would require some
malloc() pool before relocation in order to load U-Boot proper properly.
So, enable SPL malloc() pool of 0x2000 size similarly like what we have
used for icore mmc defconfigs.
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Adam Ford [Sun, 3 Mar 2019 22:22:45 +0000 (16:22 -0600)]
ARM: imx6q_logic: Enable UUID support
With UUID support, the root can now point to UUID. This makes
swiching between mmc 0 and mmc 1 easier by simplying changing
mmcdev between 0 and 1. From there, the scripts handle the rest.
Signed-off-by: Adam Ford <aford173@gmail.com>
Fabio Estevam [Thu, 21 Mar 2019 13:59:06 +0000 (10:59 -0300)]
pico-imx6ul: Fix eMMC boot after DM_MMC conversion
After the DM_MMC conversion the following eMMC boot error is observed:
U-Boot SPL 2019.04-rc4 (Mar 20 2019 - 18:53:28 +0000)
Trying to boot from MMC1
MMC Device 0 not found
spl: could not find mmc device 0. error: -19
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###
This happens because the SPL code does not initialize the SDHC pins
and clock.
Fix it by moving the original eMMC initialization from U-Boot proper
to SPL.
Reported-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Fabio Berton <fabio.berton@ossystems.com.br>
Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
Stefano Babic [Sun, 31 Mar 2019 17:54:10 +0000 (19:54 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot
Signed-off-by: Stefano Babic <sbabic@denx.de>
Tom Rini [Fri, 29 Mar 2019 14:53:28 +0000 (10:53 -0400)]
Merge branch '2019-03-29-master-imports'
- Bugfixes:
- mmc: correct the HS400 initialization process
- configs: ti: Move FIT image load address to avoid overwrite
- lib: time: update module enable MACRO
- Add mbrugger as RPi board maintainer, correct agraf's email address.
Kever Yang [Fri, 29 Mar 2019 14:17:33 +0000 (22:17 +0800)]
lib: time: update module enable MACRO
We'd better use correct way to check if module has enabled.
for we have 3 timer MACRO:
- CONFIG_TIMER
- CONFIG_SPL_TIMER
- CONFIG_TPL_TIMER
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Heinrich Schuchardt [Thu, 28 Mar 2019 21:51:35 +0000 (22:51 +0100)]
doc/git-mailrc: correct entry 'agraf'
Correct Alex's email address.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Matthias Brugger [Thu, 28 Mar 2019 13:47:39 +0000 (14:47 +0100)]
RPi: Add mbrugger as board maintainer
I took over maintainership from Alex Graf with commit
3157bbfa18 ("rpi: Make Matthias maintainer")
But I forgot to update the board maintainer file.
This patch adds myself to the game.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Andrew F. Davis [Tue, 26 Mar 2019 15:12:01 +0000 (10:12 -0500)]
configs: ti: Move FIT image load address to avoid overwrite
The FIT image is loaded to 0x8700_0000 followed by extracting from that
several large images also into the 0x8x00_0000 range. Large images
can end up overwriting the FIT image as it is being extracted from.
Move the FIT load address clear out to 0x9000_0000, this will require
a board to have at least 256MB of DRAM, if less then more careful
planning will be required for that platform.
Signed-off-by: Andrew F. Davis <afd@ti.com>
BOUGH CHEN [Tue, 26 Mar 2019 06:24:17 +0000 (06:24 +0000)]
mmc: correct the HS400 initialization process
After the commit
b9a2a0e2e9c0 ("mmc: Add support for downgrading
HS200/HS400 to HS mode"), it add a parameter in mmc_set_card_speed()
which indicates that the HS200/HS400 to HS downgrade is happening.
During the HS400 initialization, first select to HS200, and config
the related clock rate, then downgrade to HS mode. So here also need
to config the downgrade value to be true for two reasons. First,
make sure in the function mmc_set_card_speed(), after switch to HS
mode, first config the clock rate, then read the EXT_CSD, avoid
receiving data of EXT_CSD in HS mode at 200MHz. Second, after issue
the MMC_CMD_SWITCH command, it need to wait a bit then switch bus
properties.
Test on i.MX8QM MEK board, some Micron eMMC will stuck in transfer
mode in this case, and USDHC will never get data transfer complete
status, cause the uboot hang.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Tom Rini [Fri, 29 Mar 2019 13:21:30 +0000 (09:21 -0400)]
Merge tag 'efi-2019-04-rc5-2' of git://git.denx.de/u-boot-efi
Pull request for UEFI system for v2019.04-rc5-2
This patch series contains a bug fix for a double free in a UEFI unit
test. The other patches are documentation only (except for the definition
of two additional constants).
Tom Rini [Fri, 29 Mar 2019 01:44:49 +0000 (21:44 -0400)]
Merge tag 'arc-last-minute-for-2019.04' of git://git.denx.de/u-boot-arc
This is last minute change which fixes problems in runtime on
AXS10x board caused by some changes in NAND framework and
tiny documentation improvement.
Anyways NAND flash storage was never really used on the board for various
reasons and now we decided to drop it for good.
Note this change only touches 1 ARC board so that should be safe for others.
As usual - build tested in TravisCI, see
https://travis-ci.org/abrodkin/u-boot/builds/
512041342
Alexey Brodkin [Mon, 18 Feb 2019 12:03:34 +0000 (15:03 +0300)]
hsdk: readme: Suggest getting pyelftools with pip
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Suggested-by: Yunir Salimzyanov <yunir@synopsys.com>
Eugeniy Paltsev [Wed, 27 Mar 2019 13:53:43 +0000 (16:53 +0300)]
ARC: AXS10x: drop NAND support
On AXS10x boards we have non-standard NAND controller
which was never really used a lot as there're other much more
convenient [as they are standard & removable] persistent media
like SD-card and USB mass storage.
Moreover after recent changes we face with some NAND controller
runtime issues. So instead of keeping support of yet another
non-standard peripheral we're dropping its support for good.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Heinrich Schuchardt [Thu, 28 Mar 2019 07:09:16 +0000 (08:09 +0100)]
efi_loader: define development target in README.uefi
Describe the target scope of the UEFI implementation in U-Boot.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Wed, 27 Mar 2019 21:02:30 +0000 (22:02 +0100)]
efi_loader: update TODOs in doc/README.uefi
The following TODOs are closed:
- GetNextVariableName is not implemented
- event groups
- manage events in a linked list
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Wed, 20 Mar 2019 17:47:07 +0000 (18:47 +0100)]
MAINTAINERS: adjust git repository for EFI PAYLOAD
The EFI PAYLOAD will use git://git.denx.de/u-boot-efi.git in future.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Wed, 27 Mar 2019 20:41:04 +0000 (21:41 +0100)]
efi_loader: TODO for the EFI file protocol
We currently only support EFI_FILE_PROTOCOL_REVISION while
UEFI specs 2.4 - 2.7 prescribe EFI_FILE_PROTOCOL_REVISION2.
Add a todo.
Add missing constants for the EFI file protocol revision.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Tue, 26 Mar 2019 04:56:31 +0000 (05:56 +0100)]
efi_selftest: avoid double free in dp utilities test
Avoid duplicate FreePool() in unit test for the device patch utilities
protocol.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tom Rini [Wed, 27 Mar 2019 03:19:31 +0000 (23:19 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-socfpga
- configs: Stratix10: Remove CONFIG_USE_TINY_PRINTF
Tom Rini [Wed, 27 Mar 2019 03:19:11 +0000 (23:19 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-sh
- Various fixes for bugs found by u-boot test.py
Tom Rini [Wed, 27 Mar 2019 03:17:21 +0000 (23:17 -0400)]
Merge branch '2019-03-25-master-imports'
- Convert various SPI related options to Kconfig
Patrick Delaunay [Wed, 27 Feb 2019 14:20:38 +0000 (15:20 +0100)]
Convert CONFIG_ENV_SPI_* to Kconfig
This converts the following to Kconfig:
CONFIG_ENV_SPI_BUS
CONFIG_ENV_SPI_CS
CONFIG_ENV_SPI_MAX_HZ
CONFIG_ENV_SPI_MODE
Most of time these value are not needed, CONFIG_SF_DEFAULT
with same value is used, so I introduced CONFIG_USE_ENV_SPI_*
to force the associated value for the environment.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Patrick Delaunay [Wed, 27 Feb 2019 14:20:37 +0000 (15:20 +0100)]
Convert CONFIG_DEFAULT_SPI_* to Kconfig
This converts the following to Kconfig:
CONFIG_DEFAULT_SPI_BUS
CONFIG_DEFAULT_SPI_MODE
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Patrick Delaunay [Wed, 27 Feb 2019 14:20:36 +0000 (15:20 +0100)]
Convert CONFIG_SF_DEFAULT_* to Kconfig
This converts the following to Kconfig:
CONFIG_SF_DEFAULT_BUS
CONFIG_SF_DEFAULT_CS
CONFIG_SF_DEFAULT_MODE
CONFIG_SF_DEFAULT_SPEED
I use moveconfig script and then manual check on generated u-boot.cfg
to solve the remaining issue.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Patrick Delaunay [Wed, 27 Feb 2019 14:20:35 +0000 (15:20 +0100)]
tqma6s_wru4_mmc: manage board_spi_cs_gpio correctly
Define the function board_spi_cs_gpio only when needed,
only called in drivers/spi/mxc_spi.c.
That avoid compilation issue for tqma6s_wru4_mmc_defconfig
when CONFIG_SF_DEFAULT_BUS and CONFIG_SF_DEFAULT_CS are not
defined (CMD_SF not defined) after migration in KConfig.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Patrick Delaunay [Wed, 27 Feb 2019 14:20:34 +0000 (15:20 +0100)]
exynos: replace CONFIG_ENV_SPI_BASE by CONFIG_SYS_SPI_BASE
Replace CONFIG_ENV_SPI_BASE by the better CONFIG_SYS_SPI_BASE
(it is not the location for environment but the location for U-Boot)
and, as it is the only platform with use this define, remove
it from whitelist.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Patrick Delaunay [Wed, 27 Feb 2019 14:20:33 +0000 (15:20 +0100)]
controlcenterdc: move some configuration in defconfig file
Move some configurations in defconfig file
- CONFIG_CMD_I2C
- CONFIG_CMD_SPI
This allow correct dependency handling in Kconfig.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Patrick Delaunay [Wed, 27 Feb 2019 14:20:32 +0000 (15:20 +0100)]
bcm7445: move some configuration in defconfig file
Move some configurations in defconfig file
- CONFIG_DM_SPI (removed by syncing defconfigs )
- CONFIG_CMD_SF
- CONFIG_CMD_SPI
- CONFIG_CMD_SF_TEST
This allow correct dependency handling in Kconfig.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Tom Rini [Mon, 25 Mar 2019 21:26:38 +0000 (17:26 -0400)]
Merge branch '2019-03-25-master-imports'
- 3 bugfixes:
- mmc: Align MMC_TRACE with tiny printf
- scripts/Makefile.extrawarn: Silence more DTC warnings
- rsa: check that pointer checksum isn't NULL before using it
Marek Vasut [Mon, 18 Mar 2019 22:43:10 +0000 (23:43 +0100)]
mmc: tmio: Clamp SD_SECCNT to 16bit values on 16bit IP
On 16bit variants of the TMIO SD IP, the SECCNT register can only be
programmed to 16bit values, while on the 32bit and 64bit variants it
can be programmed to 32bit values. The SECCNT register indicates the
maximum number of blocks in a continuous transfer. Hence, limit the
maximum continuous transfer block count to 65535 blocks on 16bit
variants of the TMIO IP and to BIT(32)-1 blocks on 32bit and 64bit
variants.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Marek Vasut [Mon, 18 Mar 2019 05:04:17 +0000 (06:04 +0100)]
mmc: sh_mmcif: Set default MMCIF clock rate
Set MMCIF clock rate to 97.5 MHz, which is the default according
to Gen2 datasheet.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Marek Vasut [Mon, 18 Mar 2019 05:04:02 +0000 (06:04 +0100)]
clk: renesas: Add support for setting MMCIF clock divider on Gen2
Add code for configuring the MMC0CKCR/MMC1CKCR on Gen2 platforms.
This allows the MMCIF driver to set higher clock rate if desired.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Mon, 18 Mar 2019 04:38:08 +0000 (05:38 +0100)]
clk: renesas: Fix swapped div and mul in debug output on Gen2
The $div and $mul values were swapped in the debug output,
fix this.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Mon, 18 Mar 2019 04:11:42 +0000 (05:11 +0100)]
clk: renesas: Fix SDH clock divider decoding on Gen2
The gen2_clk_get_sdh_div() function is supposed to look up the
$val value read out of the SDCKCR register in the supplied table
and return the matching divider value. The current implementation
was matching the value from SDCKCR on the divider value in the
table, which is wrong. Fix this and rework the function a bit
to make it more readable.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Mon, 18 Mar 2019 02:20:31 +0000 (03:20 +0100)]
ARM: dts: rmobile: Increase off-on delay on the SD Vcc regulator
An ADATA 16GB Industrial MLC card has so much capacitance on the Vcc
pin that the usual toggling of regulator to power the card off and on
is insufficient. When the card is calibrated into UHS SDR104 mode, it
will remain in that mode across the power cycle and subsequent attempt
to communicate with the card will fail.
The test with this card is to insert it into an SDHI slot and perform
"mmc dev 0 ; mmc dev 0", where the second "mmc dev 0" will fail.
Fix this problem by increasing the off-on delay from 0 to 20 mS.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Ley Foon Tan [Fri, 22 Mar 2019 09:21:40 +0000 (17:21 +0800)]
configs: Stratix10: Remove CONFIG_USE_TINY_PRINTF
Use full printf instead of tiny printf in SPL.
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Marek Vasut [Sat, 23 Mar 2019 17:54:45 +0000 (18:54 +0100)]
mmc: Align MMC_TRACE with tiny printf
The tiny printf implementation only supports %x format specifier,
it does not support %X . Since it makes little difference whether
the debug output prints hex numbers in capitals or not, change it
to %x and make the MMC_TRACE output work with tiny printf too.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Tom Rini [Fri, 22 Mar 2019 13:47:39 +0000 (09:47 -0400)]
scripts/Makefile.extrawarn: Silence more DTC warnings
While our "extrawarns" logic has gotten out of sync with upstream
Kbuild, for now lets start by bringing in the latest set of DTC_FLAGS
from the Linux Kernel 5.0 to match their behavior in silencing warnings
from dtc.
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Philippe Reynes [Tue, 19 Mar 2019 09:55:40 +0000 (10:55 +0100)]
rsa: check that pointer checksum isn't NULL before using it
The pointer checksum were used before checking that it
isn't NULL. We move the code that use it after the check.
Reported-by: Coverity (CID: 185835)
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Fri, 22 Mar 2019 23:09:58 +0000 (19:09 -0400)]
Merge branch '2019-03-22-master-imports'
- Don't attempt to write to ext4 volumes with the metadata_csum feature
we don't support
- Correct how we build dtb files.
- Fix regression on SPL_FIT with FIT_IMAGE_TINY
- Minor TI platform fixes
Sébastien Szymanski [Fri, 22 Mar 2019 08:33:52 +0000 (09:33 +0100)]
fs: ext4: do not write on filesystem with metadata_csum feature
U-Boot doesn't support metadata_csum feature. Writing to filesystem with
metadata_csum feature makes the filesystem corrupted and unbootable by
Linux:
[ 2.527495] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 0 failed (52188!=0)
[ 2.537421] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 1 failed (5262!=0)
...
[ 2.653308] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 14 failed (42611!=0)
[ 2.662179] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 15 failed (21527!=0)
[ 2.687920] JBD2: journal checksum error
[ 2.691982] EXT4-fs (mmcblk0p2): error loading journal
[ 2.698292] VFS: Cannot open root device "mmcblk0p2" or unknown-block(179,2): error -74
Don't write to filesystem with meatadata_csum feature to not corrupt the
filesystem.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Andrew F. Davis [Mon, 11 Feb 2019 14:00:08 +0000 (08:00 -0600)]
board: ti: Move fastboot functions out of TI_SECURE_DEVICE ifdef
When these were moved from mach-omap2 to board files they got placed
inside TI_SECURE_DEVICE ifdef block, they are not secure only, move
them up and out.
Fixes:
413b90777f8d ("ti: fastboot: Move weak overrides to board files")
Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Stefan Roese [Mon, 11 Feb 2019 07:43:25 +0000 (08:43 +0100)]
pci: Add comment to mention difference in DEVFN usage in U-Boot vs Linux
This patch adds a comment to the header with the PCI_foo macros related
to DEVFN to explain the difference in U-Boot vs Linux.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Eugeniu Rosca [Thu, 14 Mar 2019 17:31:39 +0000 (18:31 +0100)]
common: image-android-dt: Fix out-of-bounds access
Currently, 'dtimg' allows users to check indexes equal to
dt_entry_count [1]. Forbid that [2].
[1] Behavior w/o the patch:
=> ext2load mmc 0:1 0x48000000 dtb.img
105695 bytes read in 5 ms (20.2 MiB/s)
=> dtimg dump 0x48000000
dt_table_header:
magic =
d7b7ab1e
total_size = 105695
header_size = 32
dt_entry_size = 32
dt_entry_count = 2
dt_entries_offset = 32
page_size = 4096
version = 0
dt_table_entry[0]:
dt_size = 105599
dt_offset = 96
id =
0b779520
rev =
00000000
custom[0] =
00000000
custom[1] =
00000000
custom[2] =
00000000
custom[3] =
00000000
(FDT)size = 105599
(FDT)compatible = shimafuji,kingfisher
dt_table_entry[1]:
dt_size = 105599
dt_offset = 96
id =
0b779530
rev =
00000000
custom[0] =
00000000
custom[1] =
00000000
custom[2] =
00000000
custom[3] =
00000000
(FDT)size = 105599
(FDT)compatible = shimafuji,kingfisher
=> dtimg size 0x48000000 0 z; print z
z=19c7f
=> dtimg size 0x48000000 1 z; print z
z=19c7f
=> dtimg size 0x48000000 2 z; print z
z=
d00dfeed
=> dtimg size 0x48000000 3 z
Error: index > dt_entry_count (3 > 2)
[2] Behavior with the patch:
=> dtimg size 0x48000000 0 z; print z
z=19c7f
=> dtimg size 0x48000000 1 z; print z
z=19c7f
=> dtimg size 0x48000000 2 z
Error: index >= dt_entry_count (2 >= 2)
Fixes:
c04473345712 ("common: Add support for Android DT image")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Faiz Abbas [Thu, 14 Mar 2019 14:09:04 +0000 (19:39 +0530)]
configs: am335x_evm: Add CONFIG_BLK
With DM_MMC and DM_USB enabled, enable CONFIG_BLK.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Masahiro Yamada [Thu, 14 Mar 2019 05:58:36 +0000 (14:58 +0900)]
Revert "Ensure device tree DTS is compiled"
This reverts commit
27cb7300ffda7a3f1581f0f5a2d3bfe59b97ad67.
I am not sure if I correctly understood the log of commit
27cb7300ffda
("Ensure device tree DTS is compiled"), but the code-diff looks like
it was trying to solve the missed re-compilation when .dts was modified.
Recently, commit
2737dfe096b6 ("kbuild: make arch-dtbs target PHONY")
fixed the issue in a more correct and more complete way.
Anyway, since the former commit, we see a clumsy log like this:
make[2]: 'arch/sandbox/dts/sandbox.dtb' is up to date
Another problem is, it created multiple paths to descend into
arch/*/dts/, causing a race in parallel building.
So, let's revert it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Thu, 14 Mar 2019 05:58:35 +0000 (14:58 +0900)]
mips: add missing dtb-y to arch/mips/dts/Makefile
Since commit
27cb7300ffda ("Ensure device tree DTS is compiled"),
build succeeds irrespective of the correctness of Makefile.
In fact, you can compile any defconfig without adding any entry in
arch/*/dts/Makefile.
I am going to revert that commit, so device tree must be explicitly
listed in Makefile.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Masahiro Yamada [Thu, 14 Mar 2019 05:58:34 +0000 (14:58 +0900)]
powerpc: fix arch/powerpc/dts/Makefile
Since commit
27cb7300ffda ("Ensure device tree DTS is compiled"),
build succeeds irrespective of the correctness of Makefile.
I am going to revert that commit, so wrong code must be fixed.
CONFIG_MCR3000 is not defined anywhere. CONFIG_TARGET_MCR3000 is the
correct one.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Thu, 14 Mar 2019 05:58:33 +0000 (14:58 +0900)]
ARM: fix arch/arm/dts/Makefile
Since commit
27cb7300ffda ("Ensure device tree DTS is compiled"),
build succeeds irrespective of the correctness of Makefile.
In fact, you can compile any defconfig without adding any entry in
arch/*/dts/Makefile.
As a result, a lot of wrong code have been merged unnoticed.
I am going to revert that commit, and lots of hidden issues have
come to light:
[1] Typos
armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts
use the extension ".dts" instead of ".dtb"
[2] DTB is associated to undefined CONFIG option
For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but
associates its device tree to CONFIG_MX6SL, which is undefined.
[3] Lots of entries are missing
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
[trini: add imx6ul pico dtbs]
Signed-off-by: Tom Rini <trini@konsulko.com>
Abel Vesa [Tue, 12 Mar 2019 08:34:32 +0000 (08:34 +0000)]
tools: fit_image: Add the loadable property to configs
When running mkimage with "-f auto", the loadable property
needs to be set in order to allow SPL FIT support to boot.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Abel Vesa [Tue, 12 Mar 2019 08:34:31 +0000 (08:34 +0000)]
common: spl_fit: Default to IH_OS_U_BOOT if FIT_IMAGE_TINY enabled
If FIT_IMAGE_TINY is enabled, spl_fit_image_get_os returns -ENOTSUPP.
In this case, we should default to IH_OS_U_BOOT not to IH_OS_INVALID.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Alexander Graf [Wed, 20 Feb 2019 16:14:49 +0000 (17:14 +0100)]
armv8: Disable exception vectors in SPL by default
Commit
1416e2d2253 ("armv8: make SPL exception vectors optional") had a
typo in it which effectively disabled exception handling in SPL code always.
Since nobody complained, I guess we may as well disable exception handling
in SPL always by default.
So fix the bug to make the config option effective, but disable exception
handling in SPL by default. This gets us to the same functionality as before
by default, but with much less code included in the binary.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Marek Vasut [Wed, 6 Mar 2019 21:04:00 +0000 (22:04 +0100)]
Makefile: Do not pass -E to mkimage when SPL has full fitImage support
When the SPL has full fitImage support, do not generate fitImage with
external data. The full fitImage code assumes the entire fitImage is
loaded in RAM, and the SPL uses fdt_totalsize() to determine the size
of the whole fitImage, which can not work with external data.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Heinrich Schuchardt [Thu, 28 Feb 2019 05:17:56 +0000 (06:17 +0100)]
cmd: set CONFIG_SYS_HELP_CMD_WIDTH = 10
CONFIG_SYS_HELP_CMD_WIDTH is used to format the output of help without any
arguments.
CONFIG_SYS_HELP_CMD_WIDTH = 8 is too narrow to fit all our commands.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Faiz Abbas [Tue, 26 Feb 2019 17:15:44 +0000 (22:45 +0530)]
configs: dra7xx_evm: Remove ENV_IS_IN_FAT
With U-boot supporting environment in multiple places, enable only
ENV_IS_IN_EMMC
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Keerthy [Wed, 20 Feb 2019 12:47:22 +0000 (18:17 +0530)]
arm: lib: bootm: Push the Starting kernel print to the end
Push the Starting kernel print to the end just before the
dm_remove_devices call.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Thu, 21 Mar 2019 17:11:06 +0000 (13:11 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-socfpga
- ARM: socfpga: Build sfp image only for Gen5 and Arria10 devices
Tom Rini [Thu, 21 Mar 2019 17:07:42 +0000 (13:07 -0400)]
Merge tag 'efi-2019-04-rc5' of git://git.denx.de/u-boot-efi
Pull request for UEFI system for v2019.04-rc5
A bunch of small fixes. The major ones being
- avoid illegal memory access in efi_allocate_pool() on 32 bit systems
- avoid endless loop in HII protocol
Tom Rini [Thu, 21 Mar 2019 17:04:42 +0000 (13:04 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-i2c
- i2c: i2c_cdns: Fix below warnings with checker tool
Siva Durga Prasad Paladugu [Thu, 14 Mar 2019 08:18:37 +0000 (09:18 +0100)]
i2c: i2c_cdns: Fix below warnings with checker tool
This patch fixes below warnings found with checker tool.
The variable len in i2c_msg struct is of unsigned type
and it is received as recv_count which is unsigned type
but it is checked with < 0 which is always false, hence
removed it.
The local variable curr_recv_count is declared as signed
type and compared aginst unsigned recv_count which is
incorrect. This is fixed by declaring it as unsigned type.
drivers/i2c/i2c-cdns.c: In function ‘cdns_i2c_read_data’:
drivers/i2c/i2c-cdns.c:317:18: warning: comparison of
unsigned expression < 0 is always false [-Wtype-limits]
if ((recv_count < 0))
^
drivers/i2c/i2c-cdns.c:340:24: warning: comparison of
integer expressions of different signedness:
‘u32’ {aka ‘unsigned int’} and ‘int’ [-Wsign-compare]
updatetx = recv_count > curr_recv_count;
^
drivers/i2c/i2c-cdns.c:361:39: warning: comparison of
integer expressions of different signedness:
‘u32’ {aka ‘unsigned int’} and ‘int’ [-Wsign-compare]
while (readl(®s->transfer_size) !=
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Dalon Westergreen [Wed, 20 Mar 2019 20:15:21 +0000 (13:15 -0700)]
ARM: socfpga: Build sfp image only for Gen5 and Arria10 devices
The sfp file is only valid for Gen5 (Cyclone5 & Arria5) and Arria10
devices. The file should only be built for these devices.
Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com>
Heinrich Schuchardt [Tue, 19 Mar 2019 19:08:46 +0000 (20:08 +0100)]
efi_selftest: fix test_hii_string_get_string()
The check testing the string result of get_string() returned the wrong
result. The result was ignored.
Use efi_st_strcmp_16_8() for the string comparison.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Tue, 19 Mar 2019 18:16:23 +0000 (19:16 +0100)]
efi_loader: superfluous conversion in efi_file_open()
printf("%ls", ..) expects u16 * as argument to print. There is not need for
a conversion to wchar_t *.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Tue, 19 Mar 2019 17:58:58 +0000 (18:58 +0100)]
efi_loader: remove superfluous check in efi_setup_loaded_image()
It does not make any sense to check if a pointer is NULL if we have
dereferenced it before.
Reported-by: Coverity (CID 185827)
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Tue, 19 Mar 2019 17:44:05 +0000 (18:44 +0100)]
efi_loader: memory leak in efi_dump_single_var()
A misplaced return statement lead to a memory leak in
efi_dump_single_var().
Reported-by: Coverity (CID 185829)
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Tue, 19 Mar 2019 17:36:21 +0000 (18:36 +0100)]
efi_loader: missing return in efi_get_next_variable_name()
Add a missing return statement in efi_get_next_variable_name().
Reported-by: Coverity (CID 185834)
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Tue, 19 Mar 2019 11:30:27 +0000 (12:30 +0100)]
efi_loader: endless loop in add_strings_package()
Avoid an endless loop in add_strings_package().
Suggested-by: Takahiro Akashi <takahiro.akashi@linaro.org>
Reported-by: Coverity (CID 185833)
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Mon, 18 Mar 2019 19:01:59 +0000 (20:01 +0100)]
efi_loader: correct parameter size in efi_allocate_pool
efi_allocate_pages() expects a (uint64_t *) pointer to pass the address of
the assigned memory. If we pass the address of a pointer here, an illegal
memory access occurs on 32bit systems.
Fixes:
282a06cbcae8 ("efi_loader: Expose U-Boot addresses in memory map
for sandbox")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tom Rini [Tue, 19 Mar 2019 23:58:48 +0000 (19:58 -0400)]
Merge git://git.denx.de/u-boot-marvell
- Enable network interface on clearfog_gt_8k (Baruch)
- Fix dreamplug boot by adding an spi0 alias to the DT (Chris)
- Fix / enhance Marvell ddr3 setup / parameters (Chris)
- Change CONFIG_SYS_MALLOC_F_LEN to 0x2000 on db-88f6820-amc (Chris)
- Enable SPL_FLASH_BAR on db-88f6820-amc (Chris)
- Use correct pcie controller name in Armada-38x dts files (Chris)
- Disable d-cache on Kirkwood platforms as currently needed (Chris)
- Add a more descriptive comment to pci_mvebu.c (Stefan)
- Update Marvell maintainers entry (Stefan)
Tom Rini [Tue, 19 Mar 2019 11:13:23 +0000 (07:13 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-socfpga
Tom Rini [Tue, 19 Mar 2019 11:13:03 +0000 (07:13 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-usb
- Fastboot fixes
Chris Packham [Mon, 18 Mar 2019 07:51:58 +0000 (20:51 +1300)]
ARM: kirkwood: disable dcache for Kirkwood boards
Prior to commit
93b283d49f93 ("ARM: CPU: arm926ejs: Consolidate cache
routines to common file") the kirkwood boards didn't have and dcache
support. The network and usb drivers rely on this. Set
CONFIG_SYS_DCACHE_OFF in the Kirkwood specific config.h.
Reported-by: Leigh Brown <leigh@solinno.co.uk>
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Chris Packham [Sat, 16 Mar 2019 07:46:20 +0000 (20:46 +1300)]
ARM: mvebu: use correct name for pcie controller
When armada-385.dtsi was sync'd from Linux the name of the node
describing the pcie controller was changed from pcie-controller to pcie.
Some of the boards that include armada-385.dtsi were missed in the
update retaining the old name. This updates the affected boards.
Reported-by: Влад Мао <vlaomao@gmail.com>
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Chris Packham [Sat, 2 Mar 2019 07:45:35 +0000 (20:45 +1300)]
ARM: mvebu: db-88f6820-amc: enable SPI_FLASH_BAR
This board uses Micron N25Q256A SPI flash. Enable SPI_FLASH_BAR to allow
us to access the whole chip.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Cc: Vignesh R <vigneshr@ti.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Chris Packham [Fri, 1 Mar 2019 01:30:03 +0000 (14:30 +1300)]
ARM: mvebu: set CONFIG_SYS_MALLOC_F_LEN to 0x2000
Set CONFIG_SYS_MALLOC_F_LEN to match the rest of the mvebu boards. The
default of 0x400 is not enough when booting from SPI.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Chris Packham [Thu, 28 Feb 2019 21:11:14 +0000 (10:11 +1300)]
mv_ddr: ddr3: only use active chip-selects when tuning ODT
Inactive chip-selects will give invalid values for read_sample so don't
consider them when trying to determine the overall min/max read sample.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
[https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell/pull/18]
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Chris Packham [Thu, 28 Feb 2019 21:11:13 +0000 (10:11 +1300)]
mv_ddr: ddr3: fix tRAS timimg parameter
Based on the JEDEC standard JESD79-3F. The tRAS timings should include
the highest speed bins at a given frequency. This is similar to commit
683c67b ("mv_ddr: ddr3: fix tfaw timimg parameter") where the wrong
comparison was used in the initial implementation.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
[https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell/pull/15]
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Chris Packham [Thu, 28 Feb 2019 07:53:23 +0000 (20:53 +1300)]
ARM: kirkwood: add spi0 alias for dreamplug
The conversion to DM_SPI managed to break accessing the environment on
dreamplug. This is because the environment code relies on being to able
to select the SPI device based on the sequence number. Add an alias so
that the spi0 bus gets sequence number 0.
Reported-by: Leigh Brown <leigh@solinno.co.uk>
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Leigh Brown <leigh@solinno.co.uk>
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 15 Feb 2019 12:56:56 +0000 (13:56 +0100)]
MAINTAINERS: Update u-boot-marvell entry
This patch does the following changes to the u-boot-marvell maintainers
entry:
- Add Armada-7k/8k to the list
- Remove Prafulla and Luka since they have been silent on the list for
a long time. Please speak up, if you would like to continue or better
start maintaining.
- Add multiple Marvell / MVEBU related driver directories and files
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Tom Rini <trini@konsulko.com>
Acked-by: Luka Perkov <luka.perkov@sartura.hr>
Signed-off-by: Stefan Roese <sr@denx.de>
Baruch Siach [Mon, 11 Feb 2019 12:19:55 +0000 (14:19 +0200)]
configs/clearfog_gt_8k: add network interface support
Enable the mvpp2 network driver for the Armada 8K SoC.
Enable the Marvell PHY driver for the on-board 1512 PHY.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Mon, 11 Feb 2019 06:53:34 +0000 (07:53 +0100)]
pci: pci_mvebu: Add comment about missing of_n_addr_cells() call
This patch adds a comment to explain the use of the hardcoded value for
the number of address cells in mvebu_get_tgt_attr(). This should help to
rework this function, once CONFIG_OF_LIVE is enabled for MVEBU in
general.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Tom Rini [Tue, 19 Mar 2019 01:14:02 +0000 (21:14 -0400)]
Prepare v2019.04-rc4
Signed-off-by: Tom Rini <trini@konsulko.com>
Simon Goldschmidt [Fri, 15 Mar 2019 19:44:32 +0000 (20:44 +0100)]
arm: socfpga: make SPL_TEXT_BASE overridable
To boot from fpga on socfpga gen5, we need to set CONFIG_SPL_TEXT_BASE to
0xC0000000 (hps2fpgaslaves base address).
Since converting CONFIG_SPL_TEXT_BASE to Kconfig hasn't been successful so
far, let's make this value overridable in socfpga_common.h, so that we can
have different board configs override this in socfpga_common.h.
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Ley Foon Tan [Wed, 13 Mar 2019 03:03:35 +0000 (11:03 +0800)]
ARM: dts: socfpga: Add missing altr,sysmgr-syscon for EMAC
Syscon register is required in dts to select correct
PHY interface.
Fix error below:
Net: Failed to get syscon: -2
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Neil Armstrong [Wed, 20 Feb 2019 10:36:12 +0000 (11:36 +0100)]
fastboot: common: fix default fastboot_boot on 64-bit
When booting on a 64-bit system, the boot_addr_start buffer is not
large enough to contain a 64-bit number, thus leading to a crash
even if fastboot_buf_addr is valid, only the high part of the address
will be printed to boot_addr_start :
fastboot with fastboot_buf_addr = 0x0000000006000000:
downloading of
92239872 bytes finished
Booting kernel at 0x00000000...
"Synchronous Abort" handler, esr 0x96000004
elr:
00000000010561f4 lr :
0000000001056fac (reloc)
<snip>
x28:
000000007df2d38f x29:
000000007df2d1b0
Resetting CPU ...
With this fix, boot_addr_start can have the full 64-bit address passed
to bootm.
Fixes:
f73a7df984a9 ("net: fastboot: Merge AOSP UDP fastboot")
Cc: Simon Glass <sjg@chromium.org>
Cc: Alex Kiernan <alex.kiernan@gmail.com>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Jean-Jacques Hiblot [Thu, 24 Jan 2019 14:44:53 +0000 (15:44 +0100)]
usb: udc-uclass: Fixed problem when no alias is defined in DT
commit
801f1fa442 "dm: usb: udc: Use SEQ_ALIAS to index the USB gadget
ports" changed the way the udevice if found. It uses the alias to find
a udevice for a given USB port number. In the commit log it was stated
that if no alias is provided, the bind order will be used instead. However
it doesn't work. Fixing this by adding a call to uclass_get_device() if
uclass_get_device_by_seq() fails.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Tested-by: Vignesh R <vigneshr@ti.com>
Sean Nyekjaer [Thu, 24 Jan 2019 14:17:21 +0000 (15:17 +0100)]
cmd: fastboot: handle watchdog while waiting for fastboot commands.
Watchdog is not handled while waiting for fastboot commands.
Tested on a i.MX6 ULL EVK board.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Tom Rini [Fri, 15 Mar 2019 15:58:17 +0000 (11:58 -0400)]
Merge git://git.denx.de/u-boot-fsl-qoriq
- DPAA2 fixes and DDR errata workaround for LS1021A
Tom Rini [Fri, 15 Mar 2019 15:58:08 +0000 (11:58 -0400)]
Merge tag 'efi-2019-04-rc4-3' of https://github.com/xypron2/u-boot
Pull request for UEFI system for v2019.04-rc4
Fix an error with the serial communication on boards with a very small
UART buffer which leads to a stalled system.
Provide an X86 reset driver for the UEFI runtime.
Fix a problem with parallel builds.
Alison Wang [Wed, 6 Mar 2019 06:49:14 +0000 (14:49 +0800)]
armv7: ls102xa: Add workaround for DDR erratum A-008850
Barrier transactions from CCI400 need to be disabled till
the DDR is configured, otherwise it may lead to system hang.
The patch adds workaround to fix the erratum.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Signed-off-by: Alison Wang <alison.wang@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Pramod Kumar [Thu, 28 Feb 2019 09:06:40 +0000 (09:06 +0000)]
drivers: net: ls1088ardb: Fix EC1 and EC2 RCW offset
Fix EC1 and EC2 read from correct offset 26, instead of 25
Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Pankaj Bansal [Thu, 28 Feb 2019 08:12:55 +0000 (08:12 +0000)]
board: fsl: lx2160aqds: modify the phy fixup code
Now that we are representing the MDIO mux in LX2160AQDS board in
producer/consumer terms, the consumer nodes' has been changed.
Therefore, modify the device tree fixups according to change in device
tree.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>